HP-ICF-SYSLOG-MIB

File: HP-ICF-SYSLOG-MIB.mib (52282 bytes)

Imported modules

HP-ICF-OID SNMPv2-SMI SNMPv2-TC
INET-ADDRESS-MIB SNMPv2-CONF SNMP-FRAMEWORK-MIB

Imported symbols

hpicfSyslog MODULE-IDENTITY OBJECT-TYPE
Counter32 Integer32 Unsigned32
NOTIFICATION-TYPE RowStatus TEXTUAL-CONVENTION
TimeStamp TruthValue InetAddressType
InetAddress InetPortNumber MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP SnmpAdminString

Defined Types

HpicfSyslogFacility  
TEXTUAL-CONVENTION    
  current INTEGER kern(0), user(1), mail(2), daemon(3), auth(4), syslog(5), lpr(6), news(7), uucp(8), sys9(9), sys10(10), sys11(11), sys12(12), sys13(13), sys14(14), cron(15), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)

HpicfSyslogSeverity  
TEXTUAL-CONVENTION    
  current INTEGER major(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)

HpicfSyslogSystemModule  
TEXTUAL-CONVENTION    
  current INTEGER all-pass(0), vlan(1), ip(2), igmp(3), ipx(4), stp(5), system(6), chassis(7), console(8), ports(9), dhcp(10), download(11), tcp(12), telnet(13), timep(14), tftp(15), xmodem(16), update(17), mgr(18), bridge(19), snmp(20), addrmgr(21), agp(22), fault(23), ldbal(24), garp(25), gvrp(26), cos(27), lacp(28), dhcpr(29), stack(30), dma(31), sntp(32), ieee8021x(33), cdp(34), auth(35), tacacs(36), radius(37), ssh(38), netinet(39), ospf(40), xrrp(41), ssl(42), ipaddrmgr(43), macauth(44), kms(45), pim(46), maclock(47), acl(48), udpf(49), inst-mon(50), udld(51), hpesp(52), lldp(53), connfilt(54), ratelim(55), idm(56), iplock(57), dhcp-snoop(58), vrrp(59), usb(60), licensing(61), loop-protect(62), sflow(63), arp-protect(64), dhcpv6c(65), mtm(66), mld(67), dca(68), qinq(69), autorun(70), ffi(71), wsm(72), dipld(73), hpsm(74), srcip(75), policy(76), oobm(77), trmode(78), ospf3(79), dhcpv6r(80), bgp(81), ufd(82), fips(83), dt(84), dcbx(85), sftp(86), stacking(87), rfs(88), testmode(89), crypto(90), ra-guard(92), securemode(96)

HpicfSyslogControlEntry  
SEQUENCE    
  hpicfSyslogControlIndex Integer32
  hpicfSyslogControlDescr SnmpAdminString
  hpicfSyslogControlBindAddrType InetAddressType
  hpicfSyslogControlBindAddr InetAddress
  hpicfSyslogControlRowStatus RowStatus
  hpicfSyslogControlBindAddrIsOobm TruthValue
  hpicfSyslogControlSmmLog INTEGER
  hpicfSyslogControlTransportProtocol INTEGER
  hpicfSyslogControlDestinationPort InetPortNumber

HpicfSyslogSeverityCounterInfoEntry  
SEQUENCE    
  hpicfSyslogSeverityTypeIndex Integer32
  hpicfSyslogSeverityType HpicfSyslogSeverity
  hpicfSyslogSeverityCounter Counter32

HpicfSyslogFacilityCounterInfoEntry  
SEQUENCE    
  hpicfSyslogfacilityCounterIndex Integer32
  hpicfSyslogfacilityType HpicfSyslogFacility
  hpicfSyslogfacilityCounter Counter32

HpicfSyslogServerStatisticsEntry  
SEQUENCE    
  hpicfSyslogServerLogSent Counter32
  hpicfSyslogServerLogRecv Counter32
  hpicfSyslogServerLogRelay Counter32
  hpicfSyslogServerSendError Counter32
  hpicfSyslogServerLogResend Counter32
  hpicfSyslogServerResendError Counter32
  hpicfSyslogServerLogBuffered Counter32

HpicfSyslogAlertsEntry  
SEQUENCE    
  hpicfSyslogAlertIndex INTEGER
  hpicfSyslogAlertAdminStatus INTEGER
  hpicfSyslogAlertTransmitInterval Unsigned32

Defined Values

hpicfSyslogMIB 1.3.6.1.4.1.11.2.14.14.1
The MIB module for configuring and monitoring syslog applications. The HP syslog application sends syslog messages.
MODULE-IDENTITY    

hpicfSyslogNotifications 1.3.6.1.4.1.11.2.14.14.1.0
OBJECT IDENTIFIER    

hpicfSyslogObjects 1.3.6.1.4.1.11.2.14.14.1.1
OBJECT IDENTIFIER    

hpicfSyslogConformance 1.3.6.1.4.1.11.2.14.14.1.3
OBJECT IDENTIFIER    

hpicfSyslogControlTable 1.3.6.1.4.1.11.2.14.14.1.1.1
A table containing the configuration parameters pertaining to the hpicfSyslog applications serviced by an SNMP agent.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfSyslogControlEntry

hpicfSyslogControlEntry 1.3.6.1.4.1.11.2.14.14.1.1.1.1
The configuration parameters pertaining to a syslog application.
OBJECT-TYPE    
  HpicfSyslogControlEntry  

hpicfSyslogControlIndex 1.3.6.1.4.1.11.2.14.14.1.1.1.1.1
The Index that uniquely identifies the syslog application in the hpicfSyslogControlTable. The value of the index for a syslog application may not be the same across system reboots. Users and applications will need to determine the index of a syslog application after system reboots. Initial implementation allows integers (1..6).
OBJECT-TYPE    
  Integer32  

hpicfSyslogControlDescr 1.3.6.1.4.1.11.2.14.14.1.1.1.1.2
A user definable description of the syslog application. This description could be used by syslog management applications e.g. in reports or in user interfaces. For the description to be persistent across reboots, the conceptual row must be in the 'active' state. Also, refer to note in hpicfSyslogControlRowStatus, for additional limitations.
OBJECT-TYPE    
  SnmpAdminString  

hpicfSyslogControlBindAddrType 1.3.6.1.4.1.11.2.14.14.1.1.1.1.3
The type of Internet address which follows in hpicfSyslogControlBindAddr. Currently only IPv4 is supported.
OBJECT-TYPE    
  InetAddressType  

hpicfSyslogControlBindAddr 1.3.6.1.4.1.11.2.14.14.1.1.1.1.4
The specific address the syslog sender will bind to. The format of the address is specified by the corresponding hpicfSyslogControlBindAddrType object.
OBJECT-TYPE    
  InetAddress  

hpicfSyslogControlRowStatus 1.3.6.1.4.1.11.2.14.14.1.1.1.1.5
This object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is in state ''active'' or in ''notInService''. The other objects in a row can be modified only when the value of this object in the corresponding conceptual row is not ''active''. Thus to modify one or more of the objects in this conceptual row, a. change the row status to ''notInService'', b. change the values of the row c. change the row status to ''active'' The hpicfSyslogControlRowStatus may be changed to ''active'' if all the managed objects in the conceptual row with MAX-ACCESS read-create have been assigned valid values. The information in each conceptual row is only persist across reboots if the row status is 'active'.
OBJECT-TYPE    
  RowStatus  

hpicfSyslogControlBindAddrIsOobm 1.3.6.1.4.1.11.2.14.14.1.1.1.1.6
This object indicates the specific address to which syslog sender will bind is on OOBM interface. This mib object will be applicable only if there is a physical OOBM port on the device.
OBJECT-TYPE    
  TruthValue  

hpicfSyslogControlSmmLog 1.3.6.1.4.1.11.2.14.14.1.1.1.1.7
This object is applicable for a device with a standby management module like 8200zl. When the value of this object is set to enabled, all the log messages from the standby management module(SMM) will be sent to the syslog server. If the value is disabled, the log messages from the standby management module will not be sent to the syslog server. By default, this is disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hpicfSyslogControlTransportProtocol 1.3.6.1.4.1.11.2.14.14.1.1.1.1.8
The transport used for the connection to the syslog server associated with this row. The default value is UDP.
OBJECT-TYPE    
  INTEGER udp(1), tcp(2)  

hpicfSyslogControlDestinationPort 1.3.6.1.4.1.11.2.14.14.1.1.1.1.9
The port used for the communication to the syslog server associated with this row. The default syslog ports for UDP is 514, the default syslog for TCP is 1470, and will be based on the setting of the TransportProtocol object.
OBJECT-TYPE    
  InetPortNumber  

hpicfSyslogOperations 1.3.6.1.4.1.11.2.14.14.1.1.2
OBJECT IDENTIFIER    

hpicfSyslogOperationsMsgsTransmitted 1.3.6.1.4.1.11.2.14.14.1.1.2.1
The number of messages transmitted by the syslog sender. This does not include the messages that could not be queued for transmission by the hpicfSyslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

hpicfSyslogOperationsMsgsDropped 1.3.6.1.4.1.11.2.14.14.1.1.2.2
The number of messages that could not be queued for transmission by the syslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime.
OBJECT-TYPE    
  Counter32  

hpicfSyslogOperationsLastMsgTransmittedTime 1.3.6.1.4.1.11.2.14.14.1.1.2.3
The value of sysUpTime when the last message was transmitted by the hpicfSyslog sender. If no messages have been transmitted by this syslog application, since the last re-initialization of the local management subsystem, then this object will have a zero value.
OBJECT-TYPE    
  TimeStamp  

hpicfSyslogOperationsStartTime 1.3.6.1.4.1.11.2.14.14.1.1.2.4
The value of sysUpTime when this syslog application was started.
OBJECT-TYPE    
  TimeStamp  

hpicfSyslogOperationsLastError 1.3.6.1.4.1.11.2.14.14.1.1.2.5
A description of the last error related to sending a syslog message that was encountered by this syslog application. If no error has been encountered by this syslog application then the value of this object will be a zero-length string. If no error has been encountered by this syslog application since the last re-initialization of the local management subsystem then the value of this object will be a zero-length string.
OBJECT-TYPE    
  SnmpAdminString  

hpicfSyslogOperationsLastErrorTime 1.3.6.1.4.1.11.2.14.14.1.1.2.6
The value of sysUpTime when the last error was encountered. If no error has been encountered by this syslog application since the last re-initialization of the local management subsystem, then this object will have a zero value.
OBJECT-TYPE    
  TimeStamp  

hpicfSyslogOperationsCounterDiscontinuityTime 1.3.6.1.4.1.11.2.14.14.1.1.2.7
The value of sysUpTime on the most recent occasion at which any one or more of this syslog application's counters, viz., counters with OID prefix 'hpicfSyslogOperationsMsgsTransmitted' or 'hpicfSyslogOperationsMsgsDropped' suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value.
OBJECT-TYPE    
  TimeStamp  

hpicfSyslogOperationsStatus 1.3.6.1.4.1.11.2.14.14.1.1.2.8
The status of the syslog application.
OBJECT-TYPE    
  INTEGER unknown(1), started(2), suspended(3), stopped(4)  

hpicfSyslogPriority 1.3.6.1.4.1.11.2.14.14.1.1.3
OBJECT IDENTIFIER    

hpicfSyslogPriorityFacility 1.3.6.1.4.1.11.2.14.14.1.1.3.1
The facility value of this entry. This value will be returned in all syslog message, regardless of the process/daemon that originates the message.
OBJECT-TYPE    
  HpicfSyslogFacility  

hpicfSyslogPrioritySeverity 1.3.6.1.4.1.11.2.14.14.1.1.3.2
The severity value of this entry. Used to filter 'event' messages.
OBJECT-TYPE    
  HpicfSyslogSeverity  

hpicfSyslogPriorityDescr 1.3.6.1.4.1.11.2.14.14.1.1.3.3
A textual description of this priority entry.
OBJECT-TYPE    
  SnmpAdminString  

hpicfSyslogSystemModule 1.3.6.1.4.1.11.2.14.14.1.1.3.4
A system module value of this entry. Used to filter 'event' messages.
OBJECT-TYPE    
  HpicfSyslogSystemModule  

hpicfSyslogStatistics 1.3.6.1.4.1.11.2.14.14.1.1.4
OBJECT IDENTIFIER    

hpicfSyslogGeneralStatistics 1.3.6.1.4.1.11.2.14.14.1.1.4.1
OBJECT IDENTIFIER    

hpicfSyslogGeneralLogSent 1.3.6.1.4.1.11.2.14.14.1.1.4.1.1
Number of syslog messages sent by the syslog sender.
OBJECT-TYPE    
  Counter32  

hpicfSyslogGeneralLogRecv 1.3.6.1.4.1.11.2.14.14.1.1.4.1.2
Number of syslog messages received by the syslog Server.
OBJECT-TYPE    
  Counter32  

hpicfSyslogGeneralLogRelay 1.3.6.1.4.1.11.2.14.14.1.1.4.1.3
The number of messages processed by the syslog relay.
OBJECT-TYPE    
  Counter32  

hpicfSyslogGeneralSendError 1.3.6.1.4.1.11.2.14.14.1.1.4.1.4
Number of syslog messages that failed during the send process and this failed message will be buffered for the retransmission process.
OBJECT-TYPE    
  Counter32  

hpicfSyslogGeneralLogResend 1.3.6.1.4.1.11.2.14.14.1.1.4.1.5
Number of syslog messages re-transmitted successfully.
OBJECT-TYPE    
  Counter32  

hpicfSyslogGeneralResendError 1.3.6.1.4.1.11.2.14.14.1.1.4.1.6
Number of syslog messages that failed during the retransmission process.The syslog retransmission will happen if and only if syslog send failed while transmitting the buffered syslog messages.
OBJECT-TYPE    
  Counter32  

hpicfSyslogGeneralLogBuffered 1.3.6.1.4.1.11.2.14.14.1.1.4.1.7
Current number of buffered syslog messages that are ready to be transmitted.
OBJECT-TYPE    
  Counter32  

hpicfSyslogSeverityStatistics 1.3.6.1.4.1.11.2.14.14.1.1.4.2
OBJECT IDENTIFIER    

hpicfSyslogSeverityCounterInfoTable 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1
A table containing the syslog severity statistics counter value.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfSyslogSeverityCounterInfoEntry

hpicfSyslogSeverityCounterInfoEntry 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1
The configuration parameters pertaining to a syslog severity statistics.
OBJECT-TYPE    
  HpicfSyslogSeverityCounterInfoEntry  

hpicfSyslogSeverityTypeIndex 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.1
The Index that uniquely identifies the syslog severity type.
OBJECT-TYPE    
  Integer32  

hpicfSyslogSeverityType 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.2
The severity type for all the syslog messages.
OBJECT-TYPE    
  HpicfSyslogSeverity  

hpicfSyslogSeverityCounter 1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.3
Number of messages transmitted per severity.
OBJECT-TYPE    
  Counter32  

hpicfSyslogFacilityStatistics 1.3.6.1.4.1.11.2.14.14.1.1.4.3
OBJECT IDENTIFIER    

hpicfSyslogFacilityCounterInfoTable 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1
A table containing the syslog facility statistics counter values.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfSyslogFacilityCounterInfoEntry

hpicfSyslogFacilityCounterInfoEntry 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1
The configuration parameters pertaining to a syslog facility statistics.
OBJECT-TYPE    
  HpicfSyslogFacilityCounterInfoEntry  

hpicfSyslogfacilityCounterIndex 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.1
The Index that uniquely identifies the syslog facility.
OBJECT-TYPE    
  Integer32  

hpicfSyslogfacilityType 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.2
The facility type for all the syslog messages.
OBJECT-TYPE    
  HpicfSyslogFacility  

hpicfSyslogfacilityCounter 1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.3
Number of syslog messages transmitted per facilty.
OBJECT-TYPE    
  Counter32  

hpicfSyslogLogMsgOptions 1.3.6.1.4.1.11.2.14.14.1.1.5
OBJECT IDENTIFIER    

hpicfSyslogClearLog 1.3.6.1.4.1.11.2.14.14.1.1.5.1
When the value of this object is set to TRUE, all the log messages will be cleared. A write operation of FALSE leads to a no operation hence A get request for this object always returns FALSE.
OBJECT-TYPE    
  TruthValue  

hpicfSyslogServerStatisticsTable 1.3.6.1.4.1.11.2.14.14.1.1.6
A table containing the statistical information pertaining to each syslog server indexed by hpicfSyslogControlIndex.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfSyslogServerStatisticsEntry

hpicfSyslogServerStatisticsEntry 1.3.6.1.4.1.11.2.14.14.1.1.6.1
The configuration parameters pertaining to a syslog application.
OBJECT-TYPE    
  HpicfSyslogServerStatisticsEntry  

hpicfSyslogServerLogSent 1.3.6.1.4.1.11.2.14.14.1.1.6.1.1
Number of syslog messages sent by the syslog sender.
OBJECT-TYPE    
  Counter32  

hpicfSyslogServerLogRecv 1.3.6.1.4.1.11.2.14.14.1.1.6.1.2
Number of syslog messages received by the syslog Server.
OBJECT-TYPE    
  Counter32  

hpicfSyslogServerLogRelay 1.3.6.1.4.1.11.2.14.14.1.1.6.1.3
The number of messages processed by the syslog relay.
OBJECT-TYPE    
  Counter32  

hpicfSyslogServerSendError 1.3.6.1.4.1.11.2.14.14.1.1.6.1.4
Number of syslog messages that failed during the send process and this failed message will be buffered for the retransmission process.
OBJECT-TYPE    
  Counter32  

hpicfSyslogServerLogResend 1.3.6.1.4.1.11.2.14.14.1.1.6.1.5
Number of syslog messages re-transmitted successfully.
OBJECT-TYPE    
  Counter32  

hpicfSyslogServerResendError 1.3.6.1.4.1.11.2.14.14.1.1.6.1.6
Number of syslog messages that failed during the retransmission process.The syslog retransmission will happen if and only if syslog send failed while transmitting the buffered syslog messages.
OBJECT-TYPE    
  Counter32  

hpicfSyslogServerLogBuffered 1.3.6.1.4.1.11.2.14.14.1.1.6.1.7
Current number of buffered syslog messages that are ready to be transmitted.
OBJECT-TYPE    
  Counter32  

hpicfSyslogAlerts 1.3.6.1.4.1.11.2.14.14.1.1.7
OBJECT IDENTIFIER    

hpicfSyslogAlertsTable 1.3.6.1.4.1.11.2.14.14.1.1.7.1
A table of entries containing configuration information for transmitting alerts in syslog messages.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfSyslogAlertsEntry

hpicfSyslogAlertsEntry 1.3.6.1.4.1.11.2.14.14.1.1.7.1.1
An entry in the 'hpicfSyslogAlertsTable'.
OBJECT-TYPE    
  HpicfSyslogAlertsEntry  

hpicfSyslogAlertIndex 1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.1
The index which uniquely identifies a row in the 'hpicfSyslogAlertsTable'. runningCfgChg - the alert type indicating that a change was made made to the switch's running configuration.
OBJECT-TYPE    
  INTEGER runningCfgChg(1)  

hpicfSyslogAlertAdminStatus 1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.2
Indicates whether the syslog application is permitted to generate given type of alerts in transmitted syslog messages. Default is disabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpicfSyslogAlertTransmitInterval 1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.3
Specifies the transmission interval in seconds for sending alerts in syslog messages. Only one syslog message is allowed for transmission within this time interval. Default value is 0, indicating there is no rate limit for alerts transmission.
OBJECT-TYPE    
  Unsigned32  

hpicfSyslogStatusChanged 1.3.6.1.4.1.11.2.14.14.1.0.1
This notification is sent when any of the objects listed are accessed. For example, when the first server address is entered, the application starts [hpicfSyslogOperationsStatus is ''started'' ]. When the last server address is removed, the syslog application stops [hpicfSyslogOperationsStatus is ''stopped'']. The value of hpicfSyslogOperationsStatus will be the new status of the syslog application after the change. Another example, when a server address is added, a notification is sent indicating the index used to store the row information, as well as the address type, the address itself, the description if given , and the row status.
NOTIFICATION-TYPE    

hpicfSyslogGroups 1.3.6.1.4.1.11.2.14.14.1.3.1
OBJECT IDENTIFIER    

hpicfSyslogCompliances 1.3.6.1.4.1.11.2.14.14.1.3.2
OBJECT IDENTIFIER    

hpicfSyslogOperationsGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.1
A collection of objects providing message related statistics.
OBJECT-GROUP    

hpicfSyslogControlGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.2
A collection of objects representing the run time parameters for the syslog applications.
OBJECT-GROUP    

hpicfSyslogPriorityGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.3
A collection of objects representing the priority groupings of hpicfSyslog messages.
OBJECT-GROUP    

hpicfSyslogNotificationGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.5
A collection of notifications about the operational state of a syslog application.
NOTIFICATION-GROUP    

hpicfSyslogControlGroupOobm 1.3.6.1.4.1.11.2.14.14.1.3.1.6
A collection of objects representing the run time parameters for the OOBM aware syslog applications.
OBJECT-GROUP    

hpicfSyslogGeneralStatisticsGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.7
A collection of objects representing the general statistics counter information.
OBJECT-GROUP    

hpicfSyslogSeverityStatisticsGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.8
A collection of objects representing the severity statistics counter information.
OBJECT-GROUP    

hpicfSyslogFacilityStatisticsGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.9
A collection of objects representing the facility statistics counter information.
OBJECT-GROUP    

hpicfSyslogControlGroupSmm 1.3.6.1.4.1.11.2.14.14.1.3.1.10
A collection of objects representing the log message for the standby module.
OBJECT-GROUP    

hpicfSyslogLogMsgOptionsGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.11
A collection of objects representing the log message information.
OBJECT-GROUP    

hpicfSyslogControlTransportGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.12
A collection of objects representing the run time parameters for the transport applications.
OBJECT-GROUP    

hpicfSyslogServerStatisticsGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.13
A collection of objects representing the server specific statistics counter information.
OBJECT-GROUP    

hpicfSyslogPriorityGroup1 1.3.6.1.4.1.11.2.14.14.1.3.1.14
A collection of object for syslog priority.
OBJECT-GROUP    

hpicfSyslogAlertsGroup 1.3.6.1.4.1.11.2.14.14.1.3.1.15
A collection of objects representing syslog alerts information.
OBJECT-GROUP    

hpicfSyslogFullCompliance1 1.3.6.1.4.1.11.2.14.14.1.3.2.1
The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the syslog application.
MODULE-COMPLIANCE    

hpicfSyslogFullCompliance2 1.3.6.1.4.1.11.2.14.14.1.3.2.2
The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP.
MODULE-COMPLIANCE    

hpicfSyslogReadOnlyCompliance1 1.3.6.1.4.1.11.2.14.14.1.3.2.4
Write access is not required.
MODULE-COMPLIANCE    

hpicfSyslogReadOnlyCompliance2 1.3.6.1.4.1.11.2.14.14.1.3.2.5
Write access is not required.
MODULE-COMPLIANCE    

hpicfSyslogNotificationCompliance 1.3.6.1.4.1.11.2.14.14.1.3.2.7
The compliance statement for SNMP entities which implement the SYSLOG-MIB and support only notifications about change in the operational status of a syslog application.
MODULE-COMPLIANCE    

hpicfSyslogFullComplianceOobm 1.3.6.1.4.1.11.2.14.14.1.3.2.8
This group is optional if there is no OOBM port on device.
MODULE-COMPLIANCE    

hpicfSyslogStatisticsCompliance 1.3.6.1.4.1.11.2.14.14.1.3.2.9
The compliance statement for SNMP entities which implement the syslog statistics.
MODULE-COMPLIANCE    

hpicfSyslogSmmLogMsgCompliance 1.3.6.1.4.1.11.2.14.14.1.3.2.10
The compliance statement for syslog log messages for standby module.
MODULE-COMPLIANCE    

hpicfSyslogTransportCompliance 1.3.6.1.4.1.11.2.14.14.1.3.2.11
The compliance statement for syslog transport .
MODULE-COMPLIANCE    

hpicfSyslogPriorityCompliance 1.3.6.1.4.1.11.2.14.14.1.3.2.12
The compliance statement for syslog priority .
MODULE-COMPLIANCE    

hpicfSyslogAlertsCompliance 1.3.6.1.4.1.11.2.14.14.1.3.2.14
The compliance statement for syslog alerts.
MODULE-COMPLIANCE