HP-ICF-LAYER3VLAN-MIB

File: HP-ICF-LAYER3VLAN-MIB.mib (4627 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF IF-MIB
HP-ICF-OID

Imported symbols

OBJECT-TYPE MODULE-IDENTITY MODULE-COMPLIANCE
OBJECT-GROUP ifIndex hpSwitch

Defined Types

HpicfLayer3VlanConfigEntry  
SEQUENCE    
  hpicfLayer3VlanStatus INTEGER

Defined Values

hpicfLayer3VlanConfigMIB 1.3.6.1.4.1.11.2.14.11.5.1.70
This MIB module describes objects to enable/disable layer 3 interface on a VLAN for devices in the HP Integrated Communication Facility product line.
MODULE-IDENTITY    

hpicfLayer3VlanConfig 1.3.6.1.4.1.11.2.14.11.5.1.70.1
OBJECT IDENTIFIER    

hpicfLayer3VlanConfigConformance 1.3.6.1.4.1.11.2.14.11.5.1.70.2
OBJECT IDENTIFIER    

hpicfLayer3VlanConfigTable 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1
This table contains layer 3 adminStatus configuration information for each VLAN interface.
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfLayer3VlanConfigEntry

hpicfLayer3VlanConfigEntry 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1
An entry in the hpicfLayer3VlanConfigEntry contains objects for configuring layer 3 adminStatus for a VLAN interface.
OBJECT-TYPE    
  HpicfLayer3VlanConfigEntry  

hpicfLayer3VlanStatus 1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1.1
The object contains the desired adminStatus of layer 3 on a VLAN. If set to 'enable' then layer 3(IPv4/IPv6) is enabled on that VLAN. If set to 'disable' then layer 3 is disabled on that VLAN.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hpicfL3VlanConfigMIBCompliances 1.3.6.1.4.1.11.2.14.11.5.1.70.2.1
OBJECT IDENTIFIER    

hpicfLayer3VlanConfigMIBGroups 1.3.6.1.4.1.11.2.14.11.5.1.70.2.2
OBJECT IDENTIFIER    

hpicfL3VlanConfigMIBCompliance 1.3.6.1.4.1.11.2.14.11.5.1.70.2.1.1
Support for this group is required for HP routers that run layer 3 enable/disable on 'All VLANs' feature
MODULE-COMPLIANCE    

hpicfLayer3VlanConfigGroup 1.3.6.1.4.1.11.2.14.11.5.1.70.2.2.1
A collection of HP proprietary objects to support enabling/disabling layer 3 on VLANs on HP routers.
OBJECT-GROUP