HP-ICF-CONNECTION-RATE-FILTER

File: HP-ICF-CONNECTION-RATE-FILTER.mib (9796 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
HP-ICF-OID INET-ADDRESS-MIB IF-MIB

Imported symbols

Integer32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE TruthValue MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP hpSwitch
InetAddress InetAddressType ifIndex

Defined Types

HpicfConnectionRateFilterIfModeConfigEntry  
SEQUENCE    
  hpicfConnectionRateFilterIfModeValue INTEGER

Defined Values

hpicfConnectionRateFilter 1.3.6.1.4.1.11.2.14.11.5.1.24
This MIB module describes objects for management of the Connection Rate Filter feature in the HP Switch product line.
MODULE-IDENTITY    

hpicfConnectionRateFilterNotifications 1.3.6.1.4.1.11.2.14.11.5.1.24.0
OBJECT IDENTIFIER    

hpicfConnectionRateFilterNotificationControl 1.3.6.1.4.1.11.2.14.11.5.1.24.1
OBJECT IDENTIFIER    

hpicfConnectionRateFilterObjects 1.3.6.1.4.1.11.2.14.11.5.1.24.2
OBJECT IDENTIFIER    

hpicfConnectionRateFilterConformance 1.3.6.1.4.1.11.2.14.11.5.1.24.3
OBJECT IDENTIFIER    

hpicfConnectionRateFilterIfModeConfig 1.3.6.1.4.1.11.2.14.11.5.1.24.4
OBJECT IDENTIFIER    

hpicfConnectionRateFilterNotification 1.3.6.1.4.1.11.2.14.11.5.1.24.0.1
This Notification indicates that the host associated with the specified IP Address has been flagged by the connection rate filter and may have been throttled or blocked.
Status: current Access: read-only
NOTIFICATION-TYPE    

hpicifConnectionRateFilterVlanId 1.3.6.1.4.1.11.2.14.11.5.1.24.2.1
This variable uniquely identifies the vlan on which the host was flagged by the connection rate filter.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..4094  

hpicifConnectionRateFilterInetAddress 1.3.6.1.4.1.11.2.14.11.5.1.24.2.2
This variable uniquely identifies the IP address of the host flagged by the connection rate filter.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

hpicifConnectionRateFilterInetAddressType 1.3.6.1.4.1.11.2.14.11.5.1.24.2.3
This variable uniquely identifies the type of IP address of the host flagged by the connection rate filter.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

hpicifConnectionRateFilterMode 1.3.6.1.4.1.11.2.14.11.5.1.24.2.4
This variable identifies the mode applied to the host flagged by the connection rate filter.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER inform(0), throttle(1), block(2)  

hpicfConnectionRateFilterIfModeConfigTable 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1
This table contains objects for configuring mode of the host flagged by the connection rate filter.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    HpicfConnectionRateFilterIfModeConfigEntry

hpicfConnectionRateFilterIfModeConfigEntry 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1
An entry in the hpicfConnectionRateFilterIfModeConfigEntry contains objects for configuring mode of the host flagged by the connection rate filter.
Status: current Access: not-accessible
OBJECT-TYPE    
  HpicfConnectionRateFilterIfModeConfigEntry  

hpicfConnectionRateFilterIfModeValue 1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1.1
This variable identifies the mode applied to the host flagged by the connection rate filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), inform(1), throttle(2), block(3)  

hpicfConnectionRateFilterNotificationControlEnable 1.3.6.1.4.1.11.2.14.11.5.1.24.1.1
This object controls, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not. The default value is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hpicfConnectionRateFilterSensitivity 1.3.6.1.4.1.11.2.14.11.5.1.24.1.2
This variable is for setting the level of filtering required for connection-rate-filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), low(1), medium(2), high(3), aggressive(4)  

hpicfConnectionRateFilterCompliances 1.3.6.1.4.1.11.2.14.11.5.1.24.3.1
OBJECT IDENTIFIER    

hpicfConnectionRateFilterGroups 1.3.6.1.4.1.11.2.14.11.5.1.24.3.2
OBJECT IDENTIFIER    

hpicfConnectionRateFilterCompliance 1.3.6.1.4.1.11.2.14.11.5.1.24.3.1.1
A compliance statement for HP Routing switches with Connection Rate Filtering capability
Status: current Access: read-write
MODULE-COMPLIANCE    

hpicfConnectionRateFilterCompliance1 1.3.6.1.4.1.11.2.14.11.5.1.24.3.1.2
A compliance statement for HP Routing switches with Connection Rate Filtering capability
Status: current Access: read-write
MODULE-COMPLIANCE    

hpicfConnectionRateFilterNotifyGroup 1.3.6.1.4.1.11.2.14.11.5.1.24.3.2.1
A collection of notifications used to indicate changes in Connection Rate Filter status
Status: current Access: read-write
NOTIFICATION-GROUP    

hpicfConnectionRateFilterObjectGroup 1.3.6.1.4.1.11.2.14.11.5.1.24.3.2.2
A collection of objects for configuring the Connection Rate Filter.
Status: current Access: read-write
OBJECT-GROUP    

hpicfConnectionRateFilterObjectGroup1 1.3.6.1.4.1.11.2.14.11.5.1.24.3.2.3
A collection of objects for configuring the Connection Rate Filter.
Status: current Access: read-write
OBJECT-GROUP