HP-ENTITY-POWER-MIB

File: HP-ENTITY-POWER-MIB.mib (4605 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF ENTITY-MIB
HP-ICF-OID

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP entPhysicalIndex
hpSwitch

Defined Types

HpEntPowerEntry  
SEQUENCE    
  hpEntPowerMaxPowerUsage Unsigned32
  hpEntPowerMinPowerUsage Unsigned32
  hpEntPowerCurrentPowerUsage Unsigned32

Defined Values

hpEntityPowerMIB 1.3.6.1.4.1.11.2.14.11.5.1.71
This MIB defines HP proprietary objects that can be used to set the power status of physical entities and report power usage statistics.
MODULE-IDENTITY    

hpEntPowerObjects 1.3.6.1.4.1.11.2.14.11.5.1.71.1
OBJECT IDENTIFIER    

hpEntPowerTable 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1
A table of information about the power status of entities. This is a sparse augment of the entPhysicalTable. Entries appear in this table for values of entPhysicalClass [RFC4133] that in this implementation are able to report any of the power state or status stored in this table.
OBJECT-TYPE    
  SEQUENCE OF  
    HpEntPowerEntry

hpEntPowerEntry 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1
Power related information about this physical entity.
OBJECT-TYPE    
  HpEntPowerEntry  

hpEntPowerMaxPowerUsage 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.1
This MIB object returns the maximum power usage of this entity. This would typically correspond to the maximum power rating of the entity.
OBJECT-TYPE    
  Unsigned32  

hpEntPowerMinPowerUsage 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.2
This MIB object returns the minimum power usage of this entity. This is applicable only to those entities that can be administratively set to function in a low power state.
OBJECT-TYPE    
  Unsigned32  

hpEntPowerCurrentPowerUsage 1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.3
This MIB object returns the current power usage of this entity. For entities that cannot be set to function in a low power mode, the value returned by this object would be the same as that of entPowerMaxPowerUsage. For entities that are set to function in a low power mode, the value returned would be the same as that of entPowerMinPowerUsage.
OBJECT-TYPE    
  Unsigned32  

hpEntPowerConformance 1.3.6.1.4.1.11.2.14.11.5.1.71.2
OBJECT IDENTIFIER    

hpEntPowerCompliances 1.3.6.1.4.1.11.2.14.11.5.1.71.2.1
OBJECT IDENTIFIER    

hpEntPowerCompliance 1.3.6.1.4.1.11.2.14.11.5.1.71.2.1.1
The compliance statement for systems supporting the HP Entity Power MIB.
MODULE-COMPLIANCE    

hpEntPowerGroups 1.3.6.1.4.1.11.2.14.11.5.1.71.2.2
OBJECT IDENTIFIER    

hpEntPowerGroup 1.3.6.1.4.1.11.2.14.11.5.1.71.2.2.1
HP proprietary Entity Power group.
OBJECT-GROUP