HOTWIRE-XDSL-INTERFACE-MIB

File: HOTWIRE-XDSL-INTERFACE-MIB.mib (63548 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
RFC1213-MIB PDN-HEADER-MIB HOT-DOMAIN-MIB

Imported symbols

Counter TimeTicks OBJECT-TYPE
TRAP-TYPE ifIndex xdsl
pdnPortConfigVNID

Defined Types

DisplayString  
OCTET STRING    

XdslDevIfIntervalStatsEntry  
SEQUENCE    
  xdslDevIfStatsIfIndex INTEGER
  xdslDevIfStatsInterval INTEGER
  xdslDevIfStatsValid15MinuteIntervalCount Counter
  xdslDevIfStatsElapsedTimeLinkUp Counter
  xdslDevIfStatsLinkDownCount Counter
  xdslDevIfStatsUpStreamSpeed INTEGER
  xdslDevIfStatsCentralReceiverGain INTEGER
  xdslDevIfStatsCentralRecMargin INTEGER
  xdslDevIfStatsCentralRecAttenuationEstimate INTEGER
  xdslDevIfStatsCentralRecTransmitPower INTEGER
  xdslDevIfStatsCentralRecErrorRate DisplayString Size(1..32)
  xdslDevIfStatsCentralRecErroredSeconds INTEGER
  xdslDevIfStatsCentralRecSeverelyErroredSeconds INTEGER
  xdslDevIfStatsRemoteReceiverGain INTEGER
  xdslDevIfStatsRemoteRecMargin INTEGER
  xdslDevIfStatsRemoteRecAttenuationEstimate INTEGER
  xdslDevIfStatsRemoteRecTransmitPower INTEGER
  xdslDevIfStatsRemoteRecErrorRate DisplayString Size(1..32)
  xdslDevIfStatsRemoteRecErroredSeconds INTEGER
  xdslDevIfStatsRemoteRecSeverelyErroredSeconds INTEGER
  xdslDevIfStatsRemoteOctetsCorrected Counter
  xdslDevIfStatsRemoteOctetsNotCorrected Counter
  xdslDevIfStatsRemoteReceivedKiloOctets Counter
  xdslDevIfStatsRemoteReceivedPkts Counter
  xdslDevIfStatsRemoteRecErrPkts Counter
  xdslDevIfStatsRemoteDroppedPkts Counter
  xdslDevIfStatsRemoteTransmittedKiloOctets Counter
  xdslDevIfStatsRemoteTransmittedPkts Counter
  xdslDevIfStatsCentralRecErroredMinutes INTEGER
  xdslDevIfStatsCentralRecSeverelyErroredMinutes INTEGER
  xdslDevIfStatsRemoteRecErroredMinutes INTEGER
  xdslDevIfStatsRemoteRecSeverelyErroredMinutes INTEGER
  xdslDevIfStatsCentralReceivedKiloOctets Counter
  xdslDevIfStatsCentralTransmittedKiloOctets Counter
  xdslDevIfStatsCentralTransmittedPkts Counter
  xdslDevIfStatsCentralReceivedPkts Counter
  xdslDevIfStatsCentralErrPkts Counter

XdslDevIfConfigEntry  
SEQUENCE    
  xdslDevIfConfigIfIndex INTEGER
  xdslDevIfConfigPortSpeedBehaviour INTEGER
  xdslDevIfConfigUpFixedPortSpeed INTEGER
  xdslDevIfConfigDownFixedPortSpeed INTEGER
  xdslDevIfConfigUpAdaptiveUpperBoundPortSpeed INTEGER
  xdslDevIfConfigUpAdaptiveLowerBoundPortSpeed INTEGER
  xdslDevIfConfigDownAdaptiveUpperBoundPortSpeed INTEGER
  xdslDevIfConfigDownAdaptiveLowerBoundPortSpeed INTEGER
  xdslDevIfConfigReedSolomonDownForwardErrorCorrection INTEGER
  xdslDevIfConfigMarginThreshold INTEGER
  xdslDevIfConfigEstimatedHrErrRateThreshold INTEGER
  xdslDevIfConfigEstimatedDayErrRateThreshold INTEGER
  xdslDevIfConfigPortID DisplayString Size(1..40)
  xdslDevIfLinkUpDownTransitionThreshold INTEGER
  xdslDevIfConfigStartUpMargin INTEGER -3..9
  xdslDevIfConfigTxPowerAttenuation INTEGER
  xdslDevIfConfigSnTxPowerAttenuation INTEGER

XdslRemoteSysEntry  
SEQUENCE    
  xdslRemoteSysIndex INTEGER
  xdslRemoteSysDescr DisplayString Size(0..255)
  xdslRemoteSysObjectID OBJECT IDENTIFIER
  xdslRemoteSysUpTime TimeTicks
  xdslRemoteSysContact DisplayString Size(0..255)
  xdslRemoteSysName DisplayString Size(0..255)
  xdslRemoteSysLocation DisplayString Size(0..255)
  xdslRemoteSysServices INTEGER 0..127
  xdslRemoteSysCircuitId DisplayString Size(1..32)

XdslRemoteDTEStatusEntry  
SEQUENCE    
  xdslRemoteDTEStatusIndex INTEGER
  xdslRemoteDTEState INTEGER
  xdslRemoteDTEType INTEGER
  xdslRemoteDTEClockSource INTEGER
  xdslRemoteDTEStrobe INTEGER
  xdslRemoteDTELoopbackState INTEGER

XdslDevMvlIfConfigEntry  
SEQUENCE    
  xdslDevMvlIfConfigIfIndex INTEGER
  xdslDevMvlIfConfigUpperBoundPortSpeed INTEGER
  xdslDevMvlIfConfigMarginThreshold INTEGER
  xdslDevMvlIfConfigPortID DisplayString Size(1..40)
  xdslDevMvlIfLinkUpDownTransitionThreshold INTEGER
  xdslDevMvlIfConfigOnHookTxPowerAttenuation INTEGER
  xdslDevMvlIfConfigOffHookTxPowerAttenuation INTEGER

XdslDevNAPCustomerAccountEntry  
SEQUENCE    
  xdslDevNAPCustomerAccountIfIndex INTEGER
  xdslDevNAPCustomerAccountInterval INTEGER
  xdslDevNAPCustomerAccountRecKiloOctets INTEGER
  xdslDevNAPCustomerAccountTrxKiloOctets INTEGER

XdslDevIDSLConfigEntry  
SEQUENCE    
  xdslDevIDSLConfigPortSpeedBehaviour INTEGER
  xdslDevIDSLConfigPortSpeed INTEGER
  xdslDevIDSLConfigPortID DisplayString Size(1..40)
  xdslDevIDSLTimingPortTransceiverMode INTEGER
  xdslDevIDSLConfigMarginThreshold INTEGER
  xdslDevIDSLLinkUpDownTransitionThreshold INTEGER

Defined Values

xdslDevice 1.3.6.1.4.1.1795.2.24.2.6.8.1
OBJECT IDENTIFIER    

xdslDevIfStats 1.3.6.1.4.1.1795.2.24.2.6.8.1.1
OBJECT IDENTIFIER    

xdslDevIfConfig 1.3.6.1.4.1.1795.2.24.2.6.8.1.2
OBJECT IDENTIFIER    

xdslRemoteSys 1.3.6.1.4.1.1795.2.24.2.6.8.1.3
OBJECT IDENTIFIER    

xdslRemoteDTEStatus 1.3.6.1.4.1.1795.2.24.2.6.8.1.4
OBJECT IDENTIFIER    

xdslDevMvlIfConfig 1.3.6.1.4.1.1795.2.24.2.6.8.1.5
OBJECT IDENTIFIER    

xdslDevNAPCustomerAccount 1.3.6.1.4.1.1795.2.24.2.6.8.1.6
OBJECT IDENTIFIER    

xdslLinkUpDownInformation 1.3.6.1.4.1.1795.2.24.2.6.8.1.7
OBJECT IDENTIFIER    

xdslRemoteInjection 1.3.6.1.4.1.1795.2.24.2.6.8.1.8
OBJECT IDENTIFIER    

xdslDevIDSLConfig 1.3.6.1.4.1.1795.2.24.2.6.8.1.9
OBJECT IDENTIFIER    

xdslDevIfIntervalStatsTable 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1
The xdslIfStatsTable provides statistics specific to the xDSL link. Statistics are collected on a per port basis and on specified intervals. Hence as such this table is indexed by the xdslDevIfStatsIfIndex and xdslDevIfStatsInterval. Also Statistics are grouped into remote and central statistics. By 'remote' we mean the statistics collected by the device at the customer premises and by 'central' we mean the statistics collected by the device located at the central office. The objects which are not grouped into these two groups are related to both ends of the xDSL link.
OBJECT-TYPE    
  SEQUENCE OF  
    XdslDevIfIntervalStatsEntry

xdslDevIfIntervalStatsEntry 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1
Describes a specific xDSL satistics entry.
OBJECT-TYPE    
  XdslDevIfIntervalStatsEntry  

xdslDevIfStatsIfIndex 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.1
The value of this object corresponds directly to each DSL interface as described in ifTable.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsInterval 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.2
The value of this object corresponds to the interval of time during which statistics were collected. previousDay(32) will have the statistics collected from 12 midnight previous calendar day
OBJECT-TYPE    
  INTEGER first15MinuteSlice(1), second15MinuteSlice(2), third15MinuteSlice(3), fourth15MinuteSlice(4), currentHour(5), current15Minutes(6), hour1of24hrs(7), hour2of24hrs(8), hour3of24hrs(9), hour4of24hrs(10), hour5of24hrs(11), hour6of24hrs(12), hour7of24hrs(13), hour8of24hrs(14), hour9of24hrs(15), hour10of24hrs(16), hour11of24hrs(17), hour12of24hrs(18), hour13of24hrs(19), hour14of24hrs(20), hour15of24hrs(21), hour16of24hrs(22), hour17of24hrs(23), hour18of24hrs(24), hour19of24hrs(25), hour20of24hrs(26), hour21of24hrs(27), hour22of24hrs(28), hour23of24hrs(29), hour24of24hrs(30), current24Hours(31), previousDay(32)  

xdslDevIfStatsValid15MinuteIntervalCount 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.3
Reflects the number of 15 minute intervals during which link was up and statistics were received from the remote end
OBJECT-TYPE    
  Counter  

xdslDevIfStatsElapsedTimeLinkUp 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.4
Reflects the elapsed time since the link was up.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsLinkDownCount 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.5
Reflects the number of times that the xDSL link has gone to a down state. This may be due to shutting down of the customers side of the link. It could also be due to error conditions which result in the going down. A large number of these per unit time (synchronized off sysUpTime) would be indicative of an error condition.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsUpStreamSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.6
The speed in the upstream (from the remote to the central site) direction. This object compliments the ifSpeed object in the ifTable which represents the speed in the downstream (from the central to the remote site) direction. The speed is measured in bits per second.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsCentralReceiverGain 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.7
Reflects the receiver gain at the central site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsCentralRecMargin 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.8
Reflects the margin at the central site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsCentralRecAttenuationEstimate 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.9
Reflects the attenuation estimate at the central site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsCentralRecTransmitPower 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.10
Reflects the transmit power at the central site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsCentralRecErrorRate 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.11
Reflects the error rate at the central site. This string will represent a floating point number of the form. [ErrRate][eE][+-][ErrRateBase] where ErrRate and ErrRateBase are integers. In Other Words ErrRate * [10^ -ErrRateBase] shown below are example of the values returned. 123456E-5 = 1.23456 344567e-6 = 0.344567
OBJECT-TYPE    
  DisplayString Size(1..32)  

xdslDevIfStatsCentralRecErroredSeconds 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.12
Reflects the errored seconds at the central site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsCentralRecSeverelyErroredSeconds 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.13
Reflects the severely errored seconds at the central site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteReceiverGain 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.14
Reflects the receiver gain at the remote site
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteRecMargin 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.15
Reflects the margin at the remote site
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteRecAttenuationEstimate 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.16
Reflects the attenuation estimate at the remote site
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteRecTransmitPower 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.17
Reflects the transmit power at the remote site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteRecErrorRate 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.18
Reflects the error rate at the remote site. This string will represent a floating point number of the form a.b. [ErrRate][eE][+-][ErrRateBase] where ErrRate and ErrRateBase are integers. In Other Words ErrRate * [10^ -ErrRateBase] shown below are example of the values returned. 123456E-5 = 1.23456 344567e-6 = 0.344567
OBJECT-TYPE    
  DisplayString Size(1..32)  

xdslDevIfStatsRemoteRecErroredSeconds 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.19
Reflects the errored seconds at the remote site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteRecSeverelyErroredSeconds 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.20
Reflects the severely errored seconds at the remote site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteOctetsCorrected 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.21
This object reflects the number of octets corrected when reed-solomon is turned on at the remote site.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsRemoteOctetsNotCorrected 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.22
This object reflects the number of octets not corrected when reed-solomon is turned on at the remote site.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsRemoteReceivedKiloOctets 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.23
The number of octets that have been received by the xDSL interface at the remote site divided by 1000.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsRemoteReceivedPkts 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.24
The number of good packets that have been received by the xDSL interface at the remote site.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsRemoteRecErrPkts 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.25
Reflects the number packet receive with error by the xDSL interface at the remote site.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsRemoteDroppedPkts 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.26
Reflects the number of good packets that have been received by the xDSL interface at the remote site, but have been dropped due to insufficient buffer capacity.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsRemoteTransmittedKiloOctets 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.27
The number of octets that have been transmitted by the xDSL interface at the remote site divided by 1000.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsRemoteTransmittedPkts 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.28
The number of pkts that have been transmitted by the xDSL interface at the remote site.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsCentralRecErroredMinutes 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.29
Reflects the errored minutes at the central site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsCentralRecSeverelyErroredMinutes 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.30
Reflects the severely errored minutes at the central site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteRecErroredMinutes 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.31
Reflects the errored minutes at the remote site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsRemoteRecSeverelyErroredMinutes 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.32
Reflects the severely errored minutes at the remote site.
OBJECT-TYPE    
  INTEGER  

xdslDevIfStatsCentralReceivedKiloOctets 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.33
The number of octets that have been received by the xDSL interface at the central site divided by 1000.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsCentralTransmittedKiloOctets 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.34
The number of octets that have been transmitted by the xDSL interface at the central site divided by 1000.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsCentralTransmittedPkts 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.35
The number of packets that have been transmitted by the xDSL interface at the central site.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsCentralReceivedPkts 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.36
The number of packets that have been received by the xDSL interface at the central site.
OBJECT-TYPE    
  Counter  

xdslDevIfStatsCentralErrPkts 1.3.6.1.4.1.1795.2.24.2.6.8.1.1.1.1.37
The number of packets that have been received by the xDSL interface at the central site with error.
OBJECT-TYPE    
  Counter  

xdslDevIfConfigTable 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1
The xdslDevIfConfigTable provides config information specific to a xDSL device, or system. The table is indexed by an object which corresponds to ifIndex. These ifIndex entries, themselves, denote and identify specific xdsl interfaces on the board or module. Also the configuration parameters are grouped into two broad categories, 'up' and 'down'. 'up' reflects the upstream direction (from the customer premises to the central office). 'Down' reflects the downstream direction (from the central office to the customer premises)
OBJECT-TYPE    
  SEQUENCE OF  
    XdslDevIfConfigEntry

xdslDevIfConfigEntry 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1
Describes a specific xDSL interface entry.
OBJECT-TYPE    
  XdslDevIfConfigEntry  

xdslDevIfConfigIfIndex 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.1
The value of this object corresponds directly to each xDSL interface as described in ifTable.
OBJECT-TYPE    
  INTEGER  

xdslDevIfConfigPortSpeedBehaviour 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.2
The value of this object corresponds to the behaviour of the specified port. The default value for this object is fixed (1).
OBJECT-TYPE    
  INTEGER fixed(1), adaptive(2)  

xdslDevIfConfigUpFixedPortSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.3
The value of this object corresponds to the upstream speed of the specified port for fixed port speed behaviour. All the speeds enumerated above are in kbps. If the port speed behaviour is adaptive an error of noSuchName will be returned by the agent. The default value for this object is s1088 (7).
OBJECT-TYPE    
  INTEGER s272(1), s408(2), s544(3), s680(4), s816(5), s952(6), s1088(7), s91(8), s476(9), s340(10), s204(11), s136(12), s119(13), s102(14), s85(15), s68(16), s51(17), s45(18), s34(19), s11(20), s2320(21), s2046(22), s1552(23), s1040(24), s784(25), s528(26), s400(27), s277(28), s144(29)  

xdslDevIfConfigDownFixedPortSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.4
The value of this object corresponds to the downstream speed of the specified port for fixed port speed behaviour. All the speeds enumerated above are in kbps. if the port speed behaviour is adaptive an error of noSuchName will be returned by the agent. The default value for this object is s2560 (7).
OBJECT-TYPE    
  INTEGER s640(1), s960(2), s1280(3), s1600(4), s1920(5), s2240(6), s2560(7), s2688(8), s3200(9), s4480(10), s5120(11), s6272(12), s7168(13), s1024(14), s896(15), s768(16), s512(17), s384(18), s256(19), s2320(20), s2046(21), s1552(22), s1040(23), s784(24), s528(25), s400(26), s277(27), s144(28)  

xdslDevIfConfigUpAdaptiveUpperBoundPortSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.5
The value of this object corresponds to the upper bound for the upstream port speed of the specified port for adaptive port speed behaviour. The speeds are measured in kbps. If the port speed behaviour is fixed an error of noSuchName will be returned by the agent. The default value for this object is s1088.
OBJECT-TYPE    
  INTEGER s272(1), s408(2), s544(3), s680(4), s816(5), s952(6), s1088(7), s91(8), s476(9), s340(10), s204(11), s136(12), s119(13), s102(14), s85(15), s68(16), s51(17), s45(18), s34(19), s11(20)  

xdslDevIfConfigUpAdaptiveLowerBoundPortSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.6
The value of this object corresponds to the lower bound for the upstream port speed of the specified port for adaptive port speed behaviour in kbps. If the port speed behaviour is fixed an error of noSuchName will be returned by the agent. The default value for this object s272.
OBJECT-TYPE    
  INTEGER s272(1), s408(2), s544(3), s680(4), s816(5), s952(6), s1088(7), s91(8), s476(9), s340(10), s204(11), s136(12), s119(13), s102(14), s85(15), s68(16), s51(17), s45(18), s34(19), s11(20)  

xdslDevIfConfigDownAdaptiveUpperBoundPortSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.7
The value of this object corresponds to the upper bound allowed for the downstream port speed of the specified port for adaptive port speed behaviour. The speeds are measured in kbps. if the port speed behaviour is fixed an error of noSuchName will be returned by the agent. The default value for this object is s2560 (7).
OBJECT-TYPE    
  INTEGER s640(1), s960(2), s1280(3), s1600(4), s1920(5), s2240(6), s2560(7), s2688(8), s3200(9), s4480(10), s5120(11), s6272(12), s7168(13), s1024(14), s896(15), s768(16), s512(17), s384(18), s256(19)  

xdslDevIfConfigDownAdaptiveLowerBoundPortSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.8
The value of this object corresponds to the Minimum lower bound allowed for the downstream port speed of the specified port for adaptive port speed behaviour. If the port speed behaviour is fixed an error of noSuchName will be returned by the agent. The speeds are measured in kbps. The default value for this object is s640(1).
OBJECT-TYPE    
  INTEGER s640(1), s960(2), s1280(3), s1600(4), s1920(5), s2240(6), s2560(7), s2688(8), s3200(9), s4480(10), s5120(11), s6272(12), s7168(13), s1024(14), s896(15), s768(16), s512(17), s384(18), s256(19)  

xdslDevIfConfigReedSolomonDownForwardErrorCorrection 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.9
The value of this object corresponds to the Reed-Solomon forward error correction in the downstream direction. The default value of this object should be minimizeError (1).
OBJECT-TYPE    
  INTEGER minimizeError(1), minimizeDelay(2), reedSolomonNotSupported(3)  

xdslDevIfConfigMarginThreshold 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.10
The value of this object corresponds to the offset from the startup margin. The threshold margin is calculated by subtracting the offset from the startup margin. Permissible range of values are between -7 and 14. A value of -9999 disables the threshold check. The default value of this object is 3
OBJECT-TYPE    
  INTEGER  

xdslDevIfConfigEstimatedHrErrRateThreshold 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.11
The value of this object corresponds to the estimated error rate threshold value on an hourly basis. A value of -9999 disables the threshold check. The default value for this object is 1000.
OBJECT-TYPE    
  INTEGER  

xdslDevIfConfigEstimatedDayErrRateThreshold 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.12
The value of this object corresponds to the estimated error rate threshold value on a daily basis. A value of -9999 disables this threshold check. The default value for this object is 10000
OBJECT-TYPE    
  INTEGER  

xdslDevIfConfigPortID 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.13
The value of this object corresponds to 40 character information only field that identifies what the DSL port is connected to (Circuit ID, MDF location, Customer name, etc.)
OBJECT-TYPE    
  DisplayString Size(1..40)  

xdslDevIfLinkUpDownTransitionThreshold 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.14
The value of this object corresponds to the threshold value for link up-down transitions. If link up-down's exceed this threshold value a xdslLinkupDownTransitions trap is generated. This value would represent the number of link up-down transitions in a 15 minute interval. A value of -9999 disables the threshold check. The default value for this object is 0
OBJECT-TYPE    
  INTEGER  

xdslDevIfConfigStartUpMargin 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.15
The value of this object corresponds to the startup value of the margin for a DSL interface (specified by ifIndex). The unit is db (decibels. The higher the margin the better the quality of the line. The default value of this object is 3.
OBJECT-TYPE    
  INTEGER -3..9  

xdslDevIfConfigTxPowerAttenuation 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.16
This value corresponds to the Transmitt Power Attenuation in dB for the access node. This value represents the downstream power level in dB. Permissible range of values are between -6 and 0. The default value of this object is 0 dB. The power levels +3 and +6 may be used in future.
OBJECT-TYPE    
  INTEGER  

xdslDevIfConfigSnTxPowerAttenuation 1.3.6.1.4.1.1795.2.24.2.6.8.1.2.1.1.17
This value corresponds to the Transmitt Power Attenuation in dB for the service node. This value represents the upstream power level in dB. The default value of this object is -6 dB.
OBJECT-TYPE    
  INTEGER  

xdslRemoteSysTable 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1
The Remote System information table. This table is based on the mib-2 system mib.
OBJECT-TYPE    
  SEQUENCE OF  
    XdslRemoteSysEntry

xdslRemoteSysEntry 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1
Describes a specific xDSL interface Remote Endpoint entry.
OBJECT-TYPE    
  XdslRemoteSysEntry  

xdslRemoteSysIndex 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.1
Refer to the mib-2 system MIB for a description.
OBJECT-TYPE    
  INTEGER  

xdslRemoteSysDescr 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.2
Refer to the mib-2 system MIB for a description.
OBJECT-TYPE    
  DisplayString Size(0..255)  

xdslRemoteSysObjectID 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.3
Refer to the mib-2 system MIB for a description.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

xdslRemoteSysUpTime 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.4
Refer to the mib-2 system MIB for a description.
OBJECT-TYPE    
  TimeTicks  

xdslRemoteSysContact 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.5
Refer to the mib-2 system MIB for a description.
OBJECT-TYPE    
  DisplayString Size(0..255)  

xdslRemoteSysName 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.6
Refer to the mib-2 system MIB for a description.
OBJECT-TYPE    
  DisplayString Size(0..255)  

xdslRemoteSysLocation 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.7
Refer to the mib-2 system MIB for a description.
OBJECT-TYPE    
  DisplayString Size(0..255)  

xdslRemoteSysServices 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.8
Refer to the mib-2 system MIB for a description.
OBJECT-TYPE    
  INTEGER 0..127  

xdslRemoteSysCircuitId 1.3.6.1.4.1.1795.2.24.2.6.8.1.3.1.1.9
The value of this object reflects the Circuit ID for a Service Node.
OBJECT-TYPE    
  DisplayString Size(1..32)  

xdslRemoteDTEStatusTable 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1
The Remote DTE Status table. This provides status information about the DTE port of the DSL RTUs.
OBJECT-TYPE    
  SEQUENCE OF  
    XdslRemoteDTEStatusEntry

xdslRemoteDTEStatusEntry 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1
This provides status information about the DTE port of a specific DSL RTU.
OBJECT-TYPE    
  XdslRemoteDTEStatusEntry  

xdslRemoteDTEStatusIndex 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.1
The value of this object corresponds directly to each DSL interface as described in the ifTable.
OBJECT-TYPE    
  INTEGER  

xdslRemoteDTEState 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.2
The value of this object reflects the state of the DTE interface of the DSL RTU.
OBJECT-TYPE    
  INTEGER inService(1), outOfService(2)  

xdslRemoteDTEType 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.3
The value of this object reflects the configuration of the DTE interface of the DSL RTU.
OBJECT-TYPE    
  INTEGER v35(1), eia530(2)  

xdslRemoteDTEClockSource 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.4
The value of this object reflects the timing configuration of the DTE interface of the DSL RTU.
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

xdslRemoteDTEStrobe 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.5
The value of this object reflects the clock edge timing configuration of the DTE interface of the DSL RTU.
OBJECT-TYPE    
  INTEGER risingEdge(1), fallingEdge(2)  

xdslRemoteDTELoopbackState 1.3.6.1.4.1.1795.2.24.2.6.8.1.4.1.1.6
The value of this object reflects the loopback state of the DTE interface of the DSL RTU.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

xdslDevMvlIfConfigTable 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1
The xdslDevMvlIfConfigTable provides config information specific to a xDSL(MVL) device, or system. The table is indexed by an object which corresponds to ifIndex. These ifIndex entries, themselves, denote and identify specific xdsl(Mvl) interfaces on the board or module.
OBJECT-TYPE    
  SEQUENCE OF  
    XdslDevMvlIfConfigEntry

xdslDevMvlIfConfigEntry 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1
Describes a specific xDSL(MVL) interface entry.
OBJECT-TYPE    
  XdslDevMvlIfConfigEntry  

xdslDevMvlIfConfigIfIndex 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.1
The value of this object corresponds directly to each xDSL(MVL) interface as described in ifTable.
OBJECT-TYPE    
  INTEGER  

xdslDevMvlIfConfigUpperBoundPortSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.2
The value of this object corresponds to the upper bound port speed of the specified port. The speeds are measured in kbps. Supported speeds are 128, 192, 256, 320, 384, 448, 512 576, 640, 704, 768. The default value of this object is 768
OBJECT-TYPE    
  INTEGER  

xdslDevMvlIfConfigMarginThreshold 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.3
The value of this object corresponds to the Margin threshold value. Permissible range of values are between -5 and 9. A value of -9999 disables the threshold check. The default value is 3
OBJECT-TYPE    
  INTEGER  

xdslDevMvlIfConfigPortID 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.4
The value of this object corresponds to 40 character information only field that identifies what the DSL port is connected to (Circuit ID, MDF location, Customer name, etc.)
OBJECT-TYPE    
  DisplayString Size(1..40)  

xdslDevMvlIfLinkUpDownTransitionThreshold 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.5
The value of this object corresponds to the threshold value for link up-down transitions. If link up-down's exceed this threshold value a xdslLinkupDownTransitions trap is generated. This value would represent the number of link up-down transitions in a 15 minute interval. A value of -9999 disables the threshold check. The default value for this object is 0
OBJECT-TYPE    
  INTEGER  

xdslDevMvlIfConfigOnHookTxPowerAttenuation 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.6
This value corresponds to the On-hook Transmitt Power Attenuation in dB for the access node and the service node. This value represents both downstream and upstream power level in dB while the phone is On-hook. Permissible range of values are between -2 and +10. The default value of this object is 10 dB.
OBJECT-TYPE    
  INTEGER  

xdslDevMvlIfConfigOffHookTxPowerAttenuation 1.3.6.1.4.1.1795.2.24.2.6.8.1.5.1.1.7
This value corresponds to the Off-hook Transmitt Power Attenuation in dB for the access node and the service node. This value represents both downstream and upstream power level in dB while the phone is Off-hook. Permissible range of values are between -2 and +7. The default value of this object is 7 dB.
OBJECT-TYPE    
  INTEGER  

xdslDevNAPCustomerAccountTable 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1
The xdslDevNAPCustomerAccountTable provides customer accounting information on each DSL port. Network Access Providers can accurately bill their end station DSL customers by the amount of usage. The table is indexed by ifIndex and xdslDevNAPCustomerAccountInterval The ifIndex identifies specific xdsl interface on the device and xdslDevNAPCustomerAccountInterval specifies the accounting information is for the current day or the previous day. Customer data excludes all traffic used for management purpose.
OBJECT-TYPE    
  SEQUENCE OF  
    XdslDevNAPCustomerAccountEntry

xdslDevNAPCustomerAccountEntry 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1
Provides customer related accounting information specific to an xDSL interface entry.
OBJECT-TYPE    
  XdslDevNAPCustomerAccountEntry  

xdslDevNAPCustomerAccountIfIndex 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.1
The value of this object corresponds directly to each xDSL interface as described in ifTable.
OBJECT-TYPE    
  INTEGER  

xdslDevNAPCustomerAccountInterval 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.2
The value of this object corresponds to the interval of time during which customer accounting data were collected. Day starts at 12.01 midnight
OBJECT-TYPE    
  INTEGER currentDay(1), previousDay(2)  

xdslDevNAPCustomerAccountRecKiloOctets 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.3
Customer data received at the AN's DSL port in 1000 Octets. The default value of this object is 0
OBJECT-TYPE    
  INTEGER  

xdslDevNAPCustomerAccountTrxKiloOctets 1.3.6.1.4.1.1795.2.24.2.6.8.1.6.1.1.4
Customer data transmitted over the AN's DSL port in 1000 Octets. The default value of this object is 0
OBJECT-TYPE    
  INTEGER  

xdslDevIDSLConfigTable 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1
The xdslDevIDSLConfigTable provides configuration specific to the IDSL link.
OBJECT-TYPE    
  SEQUENCE OF  
    XdslDevIDSLConfigEntry

xdslDevIDSLConfigEntry 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1
Describes a specific IDSL configuration entry.
OBJECT-TYPE    
  XdslDevIDSLConfigEntry  

xdslDevIDSLConfigPortSpeedBehaviour 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.1
The value of this object corresponds to the behaviour of the specified port. The default value for this object is fixed (1).
OBJECT-TYPE    
  INTEGER fixed(1), adaptive(2)  

xdslDevIDSLConfigPortSpeed 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.2
The value of this object corresponds to both upstream and downstream speed of the specified port. All the speeds are in kbps. The default value for this object is 128 kbps.
OBJECT-TYPE    
  INTEGER  

xdslDevIDSLConfigPortID 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.3
The value of this object corresponds to 40 character information only field that identifies what the DSL port is connected to (Circuit ID, MDF location, Customer name, etc.)
OBJECT-TYPE    
  DisplayString Size(1..40)  

xdslDevIDSLTimingPortTransceiverMode 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.4
The transceiver mode selected on the timing source port. Only one IDSL port can be set to NT mode. This timing will then be distributed to all other IDSL ports in the chassis that are set to LT. The selected xdslDevIDSLPrimaryTimingSourcePort provides clocking signals to the DSLAM when the transceiver mode is set to Network timing. The port selected for Network Timing mode will probably not used for customer data, but will receive a 2.048 Mhz Network clocking signal from a central office timing source and distribute this timing to other IDSL port cards.
OBJECT-TYPE    
  INTEGER networkTiming(1), localTiming(2)  

xdslDevIDSLConfigMarginThreshold 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.5
The value of this object corresponds to the Margin threshold value. A value of -9999 disables the threshold check. The value range of this object is -5 to 10. The default value is 3
OBJECT-TYPE    
  INTEGER  

xdslDevIDSLLinkUpDownTransitionThreshold 1.3.6.1.4.1.1795.2.24.2.6.8.1.9.1.1.6
The value of this object corresponds to the threshold value for link up-down transitions. If link up-down's exceed this threshold value a xdslLinkupDownTransitions trap is generated. This value would represent the number of link up-down transitions in a 15 minute interval. A value of -9999 disables the threshold check. The value range of this object is 0 to 1000. The default value for this object is 0
OBJECT-TYPE    
  INTEGER  

xdslLinkDownReason 1.3.6.1.4.1.1795.2.24.2.6.8.1.7.1
This entry contains the reason as to why the DSL Link went down. This information is obtained when the DSL Link is coming up
OBJECT-TYPE    
  DisplayString Size(1..255)  

xdslRemoteInjectionType 1.3.6.1.4.1.1795.2.24.2.6.8.1.8.1
The value of this object corresponds to the remote injection type
OBJECT-TYPE    
  INTEGER filter(1)  

xdslLinkUpDownTransitions 1
This trap signifies that the sending protocol entity recognizes that one of the xDSL communication links is in a fluctuating state. This is a trap of 'minor' class.
TRAP-TYPE    

xdslPortSpeedLow 2
This trap signifies that the port speed of the xDSL link has dropped below a threshold value. This is a trap of 'warning' class
TRAP-TYPE    

xdslPortSpeedNormal 102
This trap signifies that the port speed of the xDSL link has has gone above the threshold value. This is a trap of 'warning' class. This trap compliments the xdslPortSpeedLow Trap
TRAP-TYPE    

xdslMarginLow 3
This trap signifies that the margin estimate is below a customer set threshold value. this is a trap of 'minor' class.
TRAP-TYPE    

xdslMarginNormal 103
This trap signifies that the margin estimate has gone above a customer set threshold value. this is a trap of 'minor' class. this trap compliments the xdslMarginLow trap
TRAP-TYPE    

xdslErrorRateHigh 4
This trap signifies that the error rate estimates is above a customer set threshold value. This is a trap of 'minor' class.
TRAP-TYPE    

xdslErrorRateNormal 104
This trap signifies that the error rate estimates gone below a customer set threshold value. This is a trap of 'minor' class. This trap compliments the xdslErrorRateHigh trap.
TRAP-TYPE    

xdslPortFailure 5
This trap signifies that the processor detected a bad modem set. This is a trap of 'major' class
TRAP-TYPE    

xdslPortOperational 105
This trap signifies that the modem set which was bad is now operational. This is a trap of 'major' class. This trap compliments the xdslPortFailure trap.
TRAP-TYPE    

xdslTestStart 6
This trap signifies that a diagnostic test has started on one of the ports
TRAP-TYPE    

xdslTestOver 106
This trap signifies that the test has completed on one of the ports. This trap compliments the xdslTestStart trap.
TRAP-TYPE    

xdslRtuTypeMismatch 7
The RTU configured in the DSL card does NOT match with the RTU connected to the DSL port indicated by the ifIndex.
TRAP-TYPE    

xdslRtuTypeMismatchClear 107
The RTU configured in the DSL card does match with the RTU connected to the DSL port indicated by the ifIndex.
TRAP-TYPE    

xdslRtuSelfTestFail 16
A self test failure from the RTU connected to the DSL port indicated by the ifIndex.
TRAP-TYPE    

xdslRtuLastGasp 17
Card received LastGap message from SN followed by a link down condition one minute later.
TRAP-TYPE    

xdslSNDeviceFail 18
Operating software has detected an internal device failure. The RTU is still operating.
TRAP-TYPE    

xdslSNSelfTestFail 19
Failure of the RTU's hardware components. This trap is only set if the hardware failure still allows sending traps.
TRAP-TYPE    

xdslSNFatalReset 20
Fatal error device reset
TRAP-TYPE    

xdslLinkDownAnalysisTrap 21
This trap signifies that the sending protocol entity recognizes that the xDSL communication link is up. LinkDownReason conveys the reason for link down.
TRAP-TYPE    

xdslRemoteInjectionFailureTrap 22
This trap signifies that the injection of filters to SN failed It is of warning class
TRAP-TYPE    

xdslRemoteInjectionIncompatibleTrap 23
This trap signifies that the injection of filters is not supported by the SN. It is of warning class
TRAP-TYPE    

xdslLossOfNetworkTimingSignalTrap 24
This trap is generated by an IDSL port card when it detects that the line supplying timing signals to the chassis on the port designated as NT has dropped. The ifIndex corresponds to the port designated as NT.
TRAP-TYPE