HOTWIRE-MSDSL-INTERFACE-MIB

File: HOTWIRE-MSDSL-INTERFACE-MIB.mib (57620 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC-1215
RFC1213-MIB PDN-HEADER-MIB

Imported symbols

enterprises IpAddress TimeTicks
Counter Gauge OBJECT-TYPE
TRAP-TYPE DisplayString ifIndex
pdnmsdsl

Defined Types

MsdslCurrentEntry  
SEQUENCE    
  msdslCurrentIfIndex INTEGER
  msdslCurrentESs Gauge
  msdslCurrentSESs Gauge
  msdslCurrentFEBEs Gauge
  msdslErrEventsCounter INTEGER
  msdslErrTimeElapsed INTEGER
  msdslErrValidIntervals INTEGER

MsdslIntervalEntry  
SEQUENCE    
  msdslIntervalIfIndex INTEGER
  msdslIntervalNumber INTEGER
  msdslIntervalESs Gauge
  msdslIntervalSESs Gauge
  msdslIntervalFEBEs Gauge

MsdslWorstIntervalEntry  
SEQUENCE    
  msdslWorstIntervalIfIndex INTEGER
  msdslWorstIntervalESs INTEGER
  msdslWorstIntervalSESs INTEGER
  msdslWorstIntervalFEBEs INTEGER

MsdslTotalEntry  
SEQUENCE    
  msdslTotalIfIndex INTEGER
  msdslTotalESs Gauge
  msdslTotalSESs Gauge
  msdslTotalFEBEs Gauge

MsdslFarEndCurrentEntry  
SEQUENCE    
  msdslFarEndCurrentIfIndex INTEGER
  msdslFarEndCurrentESs Gauge
  msdslFarEndCurrentSESs Gauge
  msdslFarEndCurrentFEBEs Gauge

MsdslFarEndIntervalEntry  
SEQUENCE    
  msdslFarEndIntervalIfIndex INTEGER
  msdslFarEndIntervalNumber INTEGER
  msdslFarEndIntervalESs Gauge
  msdslFarEndIntervalSESs Gauge
  msdslFarEndIntervalFEBEs Gauge

MsdslFarEndWorstIntervalEntry  
SEQUENCE    
  msdslFarEndWorstIntervalIfIndex INTEGER
  msdslFarEndWorstIntervalESs INTEGER
  msdslFarEndWorstIntervalSESs INTEGER
  msdslFarEndWorstIntervalFEBEs INTEGER

MsdslFarEndTotalEntry  
SEQUENCE    
  msdslFarEndTotalIfIndex INTEGER
  msdslFarEndTotalESs Gauge
  msdslFarEndTotalSESs Gauge
  msdslFarEndTotalFEBEs Gauge

MsdslCurrentPerfEntry  
SEQUENCE    
  msdslCurrentPerfIfIndex INTEGER
  msdslCurrentPerfMargin Gauge
  msdslCurrentPerfTxPwr Gauge
  msdslCurrentPerfRxGain Gauge
  msdslPerfPayloadRate Gauge
  msdslTimeElapsed INTEGER
  msdslValidIntervals INTEGER

MsdslIntervalPerfEntry  
SEQUENCE    
  msdslIntervalPerfIfIndex INTEGER
  msdslIntervalPerfNumber INTEGER
  msdslIntervalPerfMargin Gauge
  msdslIntervalPerfTxPwr Gauge
  msdslIntervalPerfRxGain Gauge

MsdslFarEndCurrentPerfEntry  
SEQUENCE    
  msdslFarEndCurrentPerfIfIndex INTEGER
  msdslFarEndCurrentPerfMargin Gauge
  msdslFarEndCurrentPerfTxPwr Gauge
  msdslFarEndCurrentPerfRxGain Gauge

MsdslFarEndIntervalPerfEntry  
SEQUENCE    
  msdslFarEndIntervalPerfIfIndex INTEGER
  msdslFarEndIntervalPerfNumber INTEGER
  msdslFarEndIntervalPerfMargin Gauge
  msdslFarEndIntervalPerfTxPwr Gauge
  msdslFarEndIntervalPerfRxGain Gauge

Msdsldsx1WorstIntervalEntry  
SEQUENCE    
  msdsldsx1WorstIntervalIfIndex INTEGER
  msdsldsx1WorstIntervalESs INTEGER
  msdsldsx1WorstIntervalUASs INTEGER
  msdsldsx1WorstIntervalSESs INTEGER
  msdsldsx1WorstIntervalBESs INTEGER
  msdsldsx1WorstIntervalCSSs INTEGER
  msdsldsx1WorstIntervalLOFC INTEGER

MsdslG703WorstIntervalEntry  
SEQUENCE    
  msdslG703WorstIntervalIfIndex INTEGER
  msdslG703WorstIntervalESs INTEGER
  msdslG703WorstIntervalUASs INTEGER
  msdslG703WorstIntervalSESs INTEGER
  msdslG703WorstIntervalBESs INTEGER
  msdslG703WorstIntervalCSSs INTEGER
  msdslG703WorstIntervalLOFC INTEGER

MsdslFracEntry  
SEQUENCE    
  msdslFracPortIndex INTEGER
  msdslFracPortTS INTEGER
  msdslFracPortIfIndex INTEGER
  msdslFracPortIfTS INTEGER
  msdslFracPortVoiceData INTEGER

MsdslPortConfigAllocMethodEntry  
SEQUENCE    
  msdslPortConfigAllocMethodIfIndex INTEGER
  msdslPortConfigAllocMethod INTEGER

Defined Values

msdslDevice 1.3.6.1.4.1.1795.2.24.2.6.15.1
OBJECT IDENTIFIER    

msdslCurrent 1.3.6.1.4.1.1795.2.24.2.6.15.1.1
OBJECT IDENTIFIER    

msdslInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.2
OBJECT IDENTIFIER    

msdslWorstInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.3
OBJECT IDENTIFIER    

msdslTotal 1.3.6.1.4.1.1795.2.24.2.6.15.1.4
OBJECT IDENTIFIER    

msdslFarEndCurrent 1.3.6.1.4.1.1795.2.24.2.6.15.1.5
OBJECT IDENTIFIER    

msdslFarEndInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.6
OBJECT IDENTIFIER    

msdslFarEndWorstInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.7
OBJECT IDENTIFIER    

msdslFarEndTotal 1.3.6.1.4.1.1795.2.24.2.6.15.1.8
OBJECT IDENTIFIER    

msdslCurrentPerf 1.3.6.1.4.1.1795.2.24.2.6.15.1.9
OBJECT IDENTIFIER    

msdslIntervalPerf 1.3.6.1.4.1.1795.2.24.2.6.15.1.10
OBJECT IDENTIFIER    

msdslFarEndCurrentPerf 1.3.6.1.4.1.1795.2.24.2.6.15.1.11
OBJECT IDENTIFIER    

msdslFarEndIntervalPerf 1.3.6.1.4.1.1795.2.24.2.6.15.1.12
OBJECT IDENTIFIER    

msdsldsx1WorstInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.13
OBJECT IDENTIFIER    

msdslG703WorstInterval 1.3.6.1.4.1.1795.2.24.2.6.15.1.14
OBJECT IDENTIFIER    

msdslConfiguration 1.3.6.1.4.1.1795.2.24.2.6.15.1.15
OBJECT IDENTIFIER    

msdslCurrentTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1
The MSDSL Current 15 minute interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslCurrentEntry

msdslCurrentEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1
An entry in the MSDSL Current table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslCurrentEntry  

msdslCurrentIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslCurrentESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.2
The number of Errored Seconds, encountered by a MSDSL interface in the current 15 minute inter- val.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslCurrentSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.3
The number of Severely Errored Seconds encoun- tered by a msdsl interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslCurrentFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.4
The number of Far End Block Errors (FEBE) en- countered by a MSDSL interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslErrEventsCounter 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.5
An error event is a CRC error, maximum count is 65,535. If the count reaches 65,535 it will remain at that value until reset. Reset is when the near end data is cleared.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..65535  

msdslErrTimeElapsed 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.6
The number of seconds that have elapsed since the beginning of the current error-measurment period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..899  

msdslErrValidIntervals 1.3.6.1.4.1.1795.2.24.2.6.15.1.1.1.1.7
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals since the interface has been online.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

msdslIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2
An MSDSL Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslIntervalEntry

msdslIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1
An entry in the MSDSL Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslIntervalEntry  

msdslIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslIntervalNumber 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.2
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.3
The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.4
The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslIntervalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.2.2.1.5
The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslWorstIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3
The MSDSL Worst Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslWorstIntervalEntry

msdslWorstIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1
An entry in the msdsl Worst Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslWorstIntervalEntry  

msdslWorstIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslWorstIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.2
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslWorstIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.3
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslWorstIntervalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.3.3.1.4
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslTotalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4
The DSL Total table. 24 hour interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslTotalEntry

msdslTotalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1
An entry in the DSL Total table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslTotalEntry  

msdslTotalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.1
The index value which uniquely identifies the DSL interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a msdslLineIfIndex object instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslTotalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.2
The number of Errored Seconds encountered by a DSL interface in the previous 24 hour interval
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslTotalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.3
The number of Severely Errored Seconds encoun- tered by a DSL interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslTotalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.4.4.1.4
The number of Far End Block Errors ( FEBE) encountered by a DSL interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndCurrentTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5
The MSDSL Current table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslFarEndCurrentEntry

msdslFarEndCurrentEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1
An entry in the MSDSL Current table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslFarEndCurrentEntry  

msdslFarEndCurrentIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslFarEndCurrentESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.2
The number of Errored Seconds, encountered by a MSDSL interface in the current 15 minute inter- val.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndCurrentSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.3
The number of Severely Errored Seconds encoun- tered by a msdsl interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndCurrentFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.5.5.1.4
The number of Far End Block Errors (FEBE) en- countered by a MSDSL interface in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6
The MSDSL Far End Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslFarEndIntervalEntry

msdslFarEndIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1
An entry in the msdsl Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslFarEndIntervalEntry  

msdslFarEndIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslFarEndIntervalNumber 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.2
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslFarEndIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.3
The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.4
The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndIntervalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.6.6.1.5
The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndWorstIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7
The MSDSL Far End Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslFarEndWorstIntervalEntry

msdslFarEndWorstIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1
An entry in the msdsl Worst Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslFarEndWorstIntervalEntry  

msdslFarEndWorstIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslFarEndWorstIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.2
The number of Far End Block Errors encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslFarEndWorstIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.3
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslFarEndWorstIntervalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.7.7.1.4
The value (1 to 96) indicating the interval containing the worst Errored Seconds encountered by a DSL interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslFarEndTotalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8
The DSL Total table. 24 hour interval.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslFarEndTotalEntry

msdslFarEndTotalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1
An entry in the DSL Total table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslFarEndTotalEntry  

msdslFarEndTotalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.1
The index value which uniquely identifies the DSL interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a msdslLineIfIndex object instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslFarEndTotalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.2
The number of Errored Seconds encountered by a DSL interface in the previous 24 hour interval
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndTotalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.3
The number of Severely Errored Seconds encoun- tered by a DSL interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndTotalFEBEs 1.3.6.1.4.1.1795.2.24.2.6.15.1.8.8.1.4
The number of Far End Block Errors ( FEBE) encountered by a DSL interface in the previous 24 hour interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslCurrentPerfTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9
The MSDSL Current Peformance Statistics table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslCurrentPerfEntry

msdslCurrentPerfEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1
An entry in the MSDSL Current performance table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslCurrentPerfEntry  

msdslCurrentPerfIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslCurrentPerfMargin 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.2
The average Margin value for the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslCurrentPerfTxPwr 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.3
The average value of the Transmit power in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslCurrentPerfRxGain 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.4
The average value of the Receiver gain the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslPerfPayloadRate 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.5
An estimate of the interface's current bandwidth in bits per second. Current range is: 64k to 2048k.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslTimeElapsed 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.6
The number of seconds that have elapsed since the beginning of the current error-measurment period.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..899  

msdslValidIntervals 1.3.6.1.4.1.1795.2.24.2.6.15.1.9.9.1.7
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals since the interface has been online.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..96  

msdslIntervalPerfTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10
The MSDSL Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslIntervalPerfEntry

msdslIntervalPerfEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1
An entry in the msdsl Interval performance table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslIntervalPerfEntry  

msdslIntervalPerfIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslIntervalPerfNumber 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.2
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslIntervalPerfMargin 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.3
The average Margin for a DSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslIntervalPerfTxPwr 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.4
The average Transmit Power on a DSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslIntervalPerfRxGain 1.3.6.1.4.1.1795.2.24.2.6.15.1.10.10.1.5
The average RxGain on a DSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndCurrentPerfTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11
The MSDSL Current Peformance Statistics table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslFarEndCurrentPerfEntry

msdslFarEndCurrentPerfEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1
An entry in the MSDSL Current performance table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslFarEndCurrentPerfEntry  

msdslFarEndCurrentPerfIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslFarEndCurrentPerfMargin 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.2
The average Margin value for the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndCurrentPerfTxPwr 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.3
The average value of the Transmit power in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndCurrentPerfRxGain 1.3.6.1.4.1.1795.2.24.2.6.15.1.11.11.1.4
The average value of the Receiver gain the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndIntervalPerfTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12
The MSDSL Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslFarEndIntervalPerfEntry

msdslFarEndIntervalPerfEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1
An entry in the msdsl Interval performance table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslFarEndIntervalPerfEntry  

msdslFarEndIntervalPerfIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslFarEndIntervalPerfNumber 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.2
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..96  

msdslFarEndIntervalPerfMargin 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.3
The average Margin value for the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndIntervalPerfTxPwr 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.4
The average value of the Transmit power in the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdslFarEndIntervalPerfRxGain 1.3.6.1.4.1.1795.2.24.2.6.15.1.12.12.1.5
The average value of the Receiver gain the current 15 minute interval.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

msdsldsx1WorstIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13
The MSDSL DSX1 Worst Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Msdsldsx1WorstIntervalEntry

msdsldsx1WorstIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1
An entry in the msdsl DSX1 Worst Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Msdsldsx1WorstIntervalEntry  

msdsldsx1WorstIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdsldsx1WorstIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.2
The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdsldsx1WorstIntervalUASs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.3
The number of Unavailable Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdsldsx1WorstIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.4
The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdsldsx1WorstIntervalBESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.5
The number of Bursty Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdsldsx1WorstIntervalCSSs 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.6
The number of Controlled Slip Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdsldsx1WorstIntervalLOFC 1.3.6.1.4.1.1795.2.24.2.6.15.1.13.13.1.7
The number of Loss of Frame Counts encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslG703WorstIntervalTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14
The MSDSL G.703 Worst Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslG703WorstIntervalEntry

msdslG703WorstIntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1
An entry in the msdsl G.703 Worst Interval table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslG703WorstIntervalEntry  

msdslG703WorstIntervalIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.1
The index value which uniquely identifies the MSDSL interface to which this entry is applica- ble.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..7fffffff  

msdslG703WorstIntervalESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.2
The number of Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslG703WorstIntervalUASs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.3
The number of Unavailable Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslG703WorstIntervalSESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.4
The number of Severely Errored Seconds encoun- tered by a DSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslG703WorstIntervalBESs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.5
The number of Bursty Errored Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslG703WorstIntervalCSSs 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.6
The number of Controlled Slip Seconds encountered by a DSL interface in one of the previous 96, indi- vidual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslG703WorstIntervalLOFC 1.3.6.1.4.1.1795.2.24.2.6.15.1.14.14.1.7
The number of Loss of Frame Counts encountered by a MSDSL interface in one of the previous 96, individual 15 minute, intervals.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslFracTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28
The Paradyne MSDSL Cross Connect Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslFracEntry

msdslFracEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1
An entry in the Paradyne MSDSL Cross Connect Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslFracEntry  

msdslFracPortIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslFracPortTS 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.2
The Time Slot number associated with the interface identified by msdslFracPortIndex for this entry. If the allocation method is ds1ByPass then this object is not required since the whole port specified by msdslFracPortIndex will be assigned to the corresponding msdslFracPortIfIndex. If the allocation method is ds1CrossConn then this object is also not required since the whole port specified by msdslFracPortIndex will be assigned to the port specified by msdslFracPortIfIndex. If the allocation method is ds0CrossConn, then this object specifies the Time Slot associated with the interface identified by msdslFracPortIndex for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

msdslFracPortIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.3
An index value that uniquely identifies the interface to which this entry is mapped. The interface identified by a particular value of this index is the same interface as identified by the same value of an ifIndex object instance If no interface is currently using the Time Slot identified by msdslFracPortTS, then this value should be zero. This is used to unassign the Time Slot. If a single interface occupies more than one time slot, then its ifIndex value is found in multiple time slots (i.e., there are multiple entries in table with the same msdslFracPortIfIndex value).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

msdslFracPortIfTS 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.4
The Time Slot associated with the interface identified by msdslFracPortIfIndex for this entry. If the allocation method is ds1ByPass then this object is not required since the whole port specified by msdslFracPortIndex will be assigned to the corresponding msdslFracPortIfIndex. If the allocation method is ds1CrossConn then this object is also not required since the whole port specified by msdslFracPortIndex will be assigned to the port specified by msdslFracPortIfIndex. If the allocation method is ds0CrossConn, then this object specifies the Time Slot associated with the interface identified by msdslFracPortIfIndex for this entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..32  

msdslFracPortVoiceData 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.28.1.5
The Current mode for this DS0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER voice(1), data(2)  

msdslPortConfigAllocMethodTable 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29
The Paradyne MSDSL Cross Connect Allocation Method Table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsdslPortConfigAllocMethodEntry

msdslPortConfigAllocMethodEntry 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1
An entry in the Paradyne MSDSL Cross Connect Table Allocation Method
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsdslPortConfigAllocMethodEntry  

msdslPortConfigAllocMethodIfIndex 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.1
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msdslPortConfigAllocMethod 1.3.6.1.4.1.1795.2.24.2.6.15.1.15.29.1.2
The Current allocation method for this device. Where: ds1ByPass: In this mode the entire WAN interface is connected directly to the DSL interface. This connection provides minimal delay. Changing to this allocation method will automatically do the following assignments: WAN port 1 >>> DSL Port 1 WAN port 2 >>> DSL Port 2 WAN port 3 >>> DSL Port 3 WAN port 4 >>> DSL Port 4 WAN port 5 >>> DSL Port 5 WAN port 6 >>> DSL Port 6 WAN port 7 >>> DSL Port 7 WAN port 8 >>> DSL Port 8 ds1CrossConn: In this mode the individual WAN ports may be connected to individual DSL ports through the cross connect circuitry. This connection must use the System Clock for the timing source. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. For example: WAN port 1 >>> DSL Port 8 WAN port 2 >>> DSL Port 7 WAN port 3 >>> DSL Port 6 WAN port 4 >>> DSL Port 5 WAN port 5 >>> DSL Port 1 WAN port 6 >>> DSL Port 2 WAN port 7 >>> Not Assigned WAN port 8 >>> WAN Port 7 ds0CrossConn: This mode assigns individual time slots. Any timeslot from any WAN interface may be connected to any timeslot of any DSL interface. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. notAssigned: This indicates that this interface is not assigned. Changing to this allocation method will unassign all the time slots for this interface and any time slots to the connected interface. disabled: This is a Read Only value indicating that the interface is disabled. NOTE: Going from one mode to another mode will unassign all the time slots for that interface and the interface it was connected to. The only exception being ds1ByPass mode. When going from any mode to ds1ByPass, all the Time Slots will be assigned Network port to WAN port. These assignments, however, do not use the cross connect circuitry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ds1ByPass(1), ds1CrossConn(2), ds0CrossConn(3), notAssigned(4), disabled(5)  

msdslMarginLow 3
This trap signifies that the margin estimate is below a customer set threshold value. This is a trap of 'minor' class.
TRAP-TYPE    

msdslMarginNormal 103
This trap signifies that the margin estimate has gone above a customer set threshold value. this is a trap of 'minor' class. this trap compliments the xdslMarginLow trap
TRAP-TYPE    

msdslErrorRateHigh 4
This trap signifies that the error rate estimates is above a customer set threshold value. This is a trap of 'minor' class.
TRAP-TYPE    

msdslErrorRateNormal 104
This trap signifies that the error rate estimates gone below a customer set threshold value. This is a trap of 'minor' class. This trap compliments the xdslErrorRateHigh trap.
TRAP-TYPE    

msdslTestOver 106
This trap signifies that the test has completed on one of the ports. This trap compliments the xdslTestStart trap.
TRAP-TYPE    

msdslNTUTypeMismatch 7
The LTU configured does NOT match with the NTU connected to the DSL port indicated by the ifIndex.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor