HIRSCHMANN-PIM-MIB
File:
HIRSCHMANN-PIM-MIB.mib (33152 bytes)
Imported modules
Imported symbols
Defined Types
HmPimInterfaceEntry |
|
SEQUENCE |
|
|
|
|
hmPIMInterfaceIfIndex |
InterfaceIndex |
|
|
hmPIMInterfaceAddress |
IpAddress |
|
|
hmPIMInterfaceNetMask |
IpAddress |
|
|
hmPIMInterfaceMode |
INTEGER |
|
|
hmPIMInterfaceDR |
IpAddress |
|
|
hmPIMInterfaceHelloInterval |
Integer32 |
|
|
hmPIMInterfaceStatus |
RowStatus |
|
|
hmPIMInterfaceJoinPruneInterval |
Integer32 |
|
|
hmPIMInterfaceCBSRPreference |
Integer32 |
|
HmPimNeighborEntry |
|
SEQUENCE |
|
|
|
|
hmPIMNeighborAddress |
IpAddress |
|
|
hmPIMNeighborIfIndex |
InterfaceIndex |
|
|
hmPIMNeighborUpTime |
TimeTicks |
|
|
hmPIMNeighborExpiryTime |
TimeTicks |
|
|
hmPIMNeighborMode |
INTEGER |
|
HmPimIpMRouteEntry |
|
SEQUENCE |
|
|
|
|
hmPIMIpMRouteUpstreamAssertTimer |
TimeTicks |
|
|
hmPIMIpMRouteAssertMetric |
Integer32 |
|
|
hmPIMIpMRouteAssertMetricPref |
Integer32 |
|
|
hmPIMIpMRouteAssertRPTBit |
TruthValue |
|
|
hmPIMIpMRouteFlags |
BITS |
|
HmPimIpMRouteNextHopEntry |
|
SEQUENCE |
|
|
|
|
hmPIMIpMRouteNextHopPruneReason |
INTEGER |
|
HmPimRPEntry |
|
SEQUENCE |
|
|
|
|
hmPIMRPGroupAddress |
IpAddress |
|
|
hmPIMRPAddress |
IpAddress |
|
|
hmPIMRPState |
INTEGER |
|
|
hmPIMRPStateTimer |
TimeTicks |
|
|
hmPIMRPLastChange |
TimeTicks |
|
|
hmPIMRPRowStatus |
RowStatus |
|
HmPimRPSetEntry |
|
SEQUENCE |
|
|
|
|
hmPIMRPSetGroupAddress |
IpAddress |
|
|
hmPIMRPSetGroupMask |
IpAddress |
|
|
hmPIMRPSetAddress |
IpAddress |
|
|
hmPIMRPSetHoldTime |
Integer32 |
|
|
hmPIMRPSetExpiryTime |
TimeTicks |
|
|
hmPIMRPSetComponent |
Integer32 |
|
HmPimCandidateRPEntry |
|
SEQUENCE |
|
|
|
|
hmPIMCandidateRPGroupAddress |
IpAddress |
|
|
hmPIMCandidateRPGroupMask |
IpAddress |
|
|
hmPIMCandidateRPAddress |
IpAddress |
|
|
hmPIMCandidateRPRowStatus |
RowStatus |
|
HmPimComponentEntry |
|
SEQUENCE |
|
|
|
|
hmPIMComponentIndex |
Integer32 |
|
|
hmPIMComponentBSRAddress |
IpAddress |
|
|
hmPIMComponentBSRExpiryTime |
TimeTicks |
|
|
hmPIMComponentCRPHoldTime |
Integer32 |
|
|
hmPIMComponentStatus |
RowStatus |
|
Defined Values
hmPIMMIB |
1.3.6.1.4.1.248.15.4.99 |
The Hirschmann Private Platform4 PIM MIB definitions for Platform devices. |
MODULE-IDENTITY |
|
|
|
hmPIMTraps |
1.3.6.1.4.1.248.15.4.99.1.0 |
OBJECT IDENTIFIER |
|
|
|
hmPIM |
1.3.6.1.4.1.248.15.4.99.1.1 |
OBJECT IDENTIFIER |
|
|
|
hmPIMJoinPruneInterval |
1.3.6.1.4.1.248.15.4.99.1.1.1 |
The default interval at which periodic PIM-SM Join/Prune
messages are to be sent. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hmPIMInterfaceTable |
1.3.6.1.4.1.248.15.4.99.1.1.2 |
The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HmPimInterfaceEntry |
|
hmPIMInterfaceEntry |
1.3.6.1.4.1.248.15.4.99.1.1.2.1 |
An entry (conceptual row) in the hmPIMInterfaceTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HmPimInterfaceEntry |
|
|
hmPIMInterfaceNetMask |
1.3.6.1.4.1.248.15.4.99.1.1.2.1.3 |
The network mask for the IP address of the PIM interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMInterfaceMode |
1.3.6.1.4.1.248.15.4.99.1.1.2.1.4 |
The configured mode of this PIM interface. A value of
sparseDense is only valid for PIMv1. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dense(1), sparse(2), sparseDense(3) |
|
hmPIMInterfaceDR |
1.3.6.1.4.1.248.15.4.99.1.1.2.1.5 |
The Designated Router on this PIM interface. For point-to-
point interfaces, this object has the value 0.0.0.0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMInterfaceHelloInterval |
1.3.6.1.4.1.248.15.4.99.1.1.2.1.6 |
The frequency at which PIM Hello messages are transmitted
on this interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hmPIMInterfaceStatus |
1.3.6.1.4.1.248.15.4.99.1.1.2.1.7 |
The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
hmPIMInterfaceJoinPruneInterval |
1.3.6.1.4.1.248.15.4.99.1.1.2.1.8 |
The frequency at which PIM Join/Prune messages are
transmitted on this PIM interface. The default value of
this object is the hmPIMJoinPruneInterval. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hmPIMInterfaceCBSRPreference |
1.3.6.1.4.1.248.15.4.99.1.1.2.1.9 |
The preference value for the local interface as a candidate
bootstrap router. The value of -1 is used to indicate that
the local interface is not a candidate BSR interface. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-1..255 |
|
hmPIMNeighborTable |
1.3.6.1.4.1.248.15.4.99.1.1.3 |
The (conceptual) table listing the router's PIM neighbors. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HmPimNeighborEntry |
|
hmPIMNeighborEntry |
1.3.6.1.4.1.248.15.4.99.1.1.3.1 |
An entry (conceptual row) in the hmPIMNeighborTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HmPimNeighborEntry |
|
|
hmPIMNeighborAddress |
1.3.6.1.4.1.248.15.4.99.1.1.3.1.1 |
The IP address of the PIM neighbor for which this entry
contains information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMNeighborIfIndex |
1.3.6.1.4.1.248.15.4.99.1.1.3.1.2 |
The value of ifIndex for the interface used to reach this
PIM neighbor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
hmPIMNeighborUpTime |
1.3.6.1.4.1.248.15.4.99.1.1.3.1.3 |
The time since this PIM neighbor (last) became a neighbor
of the local router. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
hmPIMNeighborExpiryTime |
1.3.6.1.4.1.248.15.4.99.1.1.3.1.4 |
The minimum time remaining before this PIM neighbor will be
aged out. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
hmPIMNeighborMode |
1.3.6.1.4.1.248.15.4.99.1.1.3.1.5 |
The active PIM mode of this neighbor. This object is
deprecated for PIMv2 routers since all neighbors on the
interface must be either dense or sparse as determined by
the protocol running on the interface. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
dense(1), sparse(2) |
|
hmPIMIpMRouteTable |
1.3.6.1.4.1.248.15.4.99.1.1.4 |
The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HmPimIpMRouteEntry |
|
hmPIMIpMRouteEntry |
1.3.6.1.4.1.248.15.4.99.1.1.4.1 |
An entry (conceptual row) in the hmPIMIpMRouteTable. There
is one entry per entry in the ipMRouteTable whose incoming
interface is running PIM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HmPimIpMRouteEntry |
|
|
hmPIMIpMRouteUpstreamAssertTimer |
1.3.6.1.4.1.248.15.4.99.1.1.4.1.1 |
The time remaining before the router changes its upstream
neighbor back to its RPF neighbor. This timer is called the
Assert timer in the PIM Sparse and Dense mode specification.
A value of 0 indicates that no Assert has changed the
upstream neighbor away from the RPF neighbor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
hmPIMIpMRouteAssertMetric |
1.3.6.1.4.1.248.15.4.99.1.1.4.1.2 |
The metric advertised by the assert winner on the upstream
interface, or 0 if no such assert is in received. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hmPIMIpMRouteAssertMetricPref |
1.3.6.1.4.1.248.15.4.99.1.1.4.1.3 |
The preference advertised by the assert winner on the
upstream interface, or 0 if no such assert is in effect. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hmPIMIpMRouteAssertRPTBit |
1.3.6.1.4.1.248.15.4.99.1.1.4.1.4 |
The value of the RPT-bit advertised by the assert winner on
the upstream interface, or false if no such assert is in
effect. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
hmPIMIpMRouteFlags |
1.3.6.1.4.1.248.15.4.99.1.1.4.1.5 |
This object describes PIM-specific flags related to a
multicast state entry. See the PIM Sparse Mode
specification for the meaning of the RPT and SPT bits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BITS |
rpt(0), spt(1) |
|
hmPIMIpMRouteNextHopTable |
1.3.6.1.4.1.248.15.4.99.1.1.7 |
The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteNextHopTable defined in
the IP Multicast MIB. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HmPimIpMRouteNextHopEntry |
|
hmPIMIpMRouteNextHopEntry |
1.3.6.1.4.1.248.15.4.99.1.1.7.1 |
An entry (conceptual row) in the hmPIMIpMRouteNextHopTable.
There is one entry per entry in the ipMRouteNextHopTable
whose interface is running PIM and whose
ipMRouteNextHopState is pruned(1). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HmPimIpMRouteNextHopEntry |
|
|
hmPIMIpMRouteNextHopPruneReason |
1.3.6.1.4.1.248.15.4.99.1.1.7.1.2 |
This object indicates why the downstream interface was
pruned, whether in response to a PIM prune message or due to
PIM Assert processing. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), prune(2), assert(3) |
|
hmPIMRPTable |
1.3.6.1.4.1.248.15.4.99.1.1.5 |
The (conceptual) table listing PIM version 1 information
for the Rendezvous Points (RPs) for IP multicast groups.
This table is deprecated since its function is replaced by
the hmPIMRPSetTable for PIM version 2. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HmPimRPEntry |
|
hmPIMRPEntry |
1.3.6.1.4.1.248.15.4.99.1.1.5.1 |
An entry (conceptual row) in the hmPIMRPTable. There is one
entry per RP address for each IP multicast group. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HmPimRPEntry |
|
|
hmPIMRPGroupAddress |
1.3.6.1.4.1.248.15.4.99.1.1.5.1.1 |
The IP multicast group address for which this entry
contains information about an RP. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMRPAddress |
1.3.6.1.4.1.248.15.4.99.1.1.5.1.2 |
The unicast address of the RP. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMRPState |
1.3.6.1.4.1.248.15.4.99.1.1.5.1.3 |
The state of the RP. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
hmPIMRPStateTimer |
1.3.6.1.4.1.248.15.4.99.1.1.5.1.4 |
The minimum time remaining before the next state change.
When hmPIMRPState is up, this is the minimum time which must
expire until it can be declared down. When hmPIMRPState is
down, this is the time until it will be declared up (in
order to retry). |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
hmPIMRPLastChange |
1.3.6.1.4.1.248.15.4.99.1.1.5.1.5 |
The value of sysUpTime at the time when the corresponding
instance of hmPIMRPState last changed its value. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
hmPIMRPRowStatus |
1.3.6.1.4.1.248.15.4.99.1.1.5.1.6 |
The status of this row, by which new entries may be
created, or old entries deleted from this table. |
Status: deprecated |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
hmPIMRPSetTable |
1.3.6.1.4.1.248.15.4.99.1.1.6 |
The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements. When
the local router is not the BSR, this information is
obtained from received RP-Set messages. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HmPimRPSetEntry |
|
hmPIMRPSetEntry |
1.3.6.1.4.1.248.15.4.99.1.1.6.1 |
An entry (conceptual row) in the hmPIMRPSetTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HmPimRPSetEntry |
|
|
hmPIMRPSetGroupAddress |
1.3.6.1.4.1.248.15.4.99.1.1.6.1.1 |
The IP multicast group address which, when combined with
hmPIMRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMRPSetGroupMask |
1.3.6.1.4.1.248.15.4.99.1.1.6.1.2 |
The multicast group address mask which, when combined with
hmPIMRPSetGroupAddress, gives the group prefix for which this
entry contains information about the Candidate-RP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMRPSetAddress |
1.3.6.1.4.1.248.15.4.99.1.1.6.1.3 |
The IP address of the Candidate-RP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMRPSetHoldTime |
1.3.6.1.4.1.248.15.4.99.1.1.6.1.4 |
The holdtime of a Candidate-RP. If the local router is not
the BSR, this value is 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
hmPIMRPSetExpiryTime |
1.3.6.1.4.1.248.15.4.99.1.1.6.1.5 |
The minimum time remaining before the Candidate-RP will be
declared down. If the local router is not the BSR, this
value is 0. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
hmPIMRPSetComponent |
1.3.6.1.4.1.248.15.4.99.1.1.6.1.6 |
A number uniquely identifying the component. Each
protocol instance connected to a separate domain should have
a different index value. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
hmPIMCandidateRPTable |
1.3.6.1.4.1.248.15.4.99.1.1.11 |
The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of hmPIMComponentCRPHoldTime is
non-zero. If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of hmPIMComponentCRPHoldTime is non-
zero). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HmPimCandidateRPEntry |
|
hmPIMCandidateRPEntry |
1.3.6.1.4.1.248.15.4.99.1.1.11.1 |
An entry (conceptual row) in the hmPIMCandidateRPTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HmPimCandidateRPEntry |
|
|
hmPIMCandidateRPGroupAddress |
1.3.6.1.4.1.248.15.4.99.1.1.11.1.1 |
The IP multicast group address which, when combined with
hmPIMCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMCandidateRPGroupMask |
1.3.6.1.4.1.248.15.4.99.1.1.11.1.2 |
The multicast group address mask which, when combined with
hmPIMCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMCandidateRPAddress |
1.3.6.1.4.1.248.15.4.99.1.1.11.1.3 |
The (unicast) address of the interface which will be
advertised as a Candidate-RP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMCandidateRPRowStatus |
1.3.6.1.4.1.248.15.4.99.1.1.11.1.4 |
The status of this row, by which new entries may be
created, or old entries deleted from this table. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
hmPIMComponentTable |
1.3.6.1.4.1.248.15.4.99.1.1.12 |
The (conceptual) table containing objects specific to a PIM
domain. One row exists for each domain to which the router
is connected. A PIM-SM domain is defined as an area of the
network over which Bootstrap messages are forwarded.
Typically, a PIM-SM router will be a member of exactly one
domain. This table also supports, however, routers which
may form a border between two PIM-SM domains and do not
forward Bootstrap messages between them. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HmPimComponentEntry |
|
hmPIMComponentEntry |
1.3.6.1.4.1.248.15.4.99.1.1.12.1 |
An entry (conceptual row) in the hmPIMComponentTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HmPimComponentEntry |
|
|
hmPIMComponentIndex |
1.3.6.1.4.1.248.15.4.99.1.1.12.1.1 |
A number uniquely identifying the component. Each protocol
instance connected to a separate domain should have a
different index value. Routers that only support membership
in a single PIM-SM domain should use a hmPIMComponentIndex
value of 1. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
hmPIMComponentBSRAddress |
1.3.6.1.4.1.248.15.4.99.1.1.12.1.2 |
The IP address of the bootstrap router (BSR) for the local
PIM region. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hmPIMComponentBSRExpiryTime |
1.3.6.1.4.1.248.15.4.99.1.1.12.1.3 |
The minimum time remaining before the bootstrap router in
the local domain will be declared down. For candidate BSRs,
this is the time until the component sends an RP-Set
message. For other routers, this is the time until it may
accept an RP-Set message from a lower candidate BSR. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
hmPIMComponentCRPHoldTime |
1.3.6.1.4.1.248.15.4.99.1.1.12.1.4 |
The holdtime of the component when it is a candidate RP in
the local domain. The value of 0 is used to indicate that
the local system is not a Candidate-RP. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
hmPIMComponentStatus |
1.3.6.1.4.1.248.15.4.99.1.1.12.1.5 |
The status of this entry. Creating the entry creates
another protocol instance; destroying the entry disables a
protocol instance. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
hmPIMNeighborLoss |
1.3.6.1.4.1.248.15.4.99.1.0.1 |
A hmPIMNeighborLoss trap signifies the loss of an adjacency
with a neighbor. This trap should be generated when the
neighbor timer expires, and the router has no other
neighbors on the same interface with a lower IP address than
itself. |
Status: current |
Access: read-create |
NOTIFICATION-TYPE |
|
|
|
hmPIMV1MIBCompliance |
1.3.6.1.4.1.248.15.4.99.2.1.1 |
The compliance statement for routers running PIMv1 and
implementing the PIM MIB. |
Status: deprecated |
Access: read-create |
MODULE-COMPLIANCE |
|
|
|
hmPIMSparseV2MIBCompliance |
1.3.6.1.4.1.248.15.4.99.2.1.2 |
The compliance statement for routers running PIM Sparse
Mode and implementing the PIM MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
hmPIMDenseV2MIBCompliance |
1.3.6.1.4.1.248.15.4.99.2.1.3 |
The compliance statement for routers running PIM Dense Mode
and implementing the PIM MIB. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
hmPIMNotificationGroup |
1.3.6.1.4.1.248.15.4.99.2.2.1 |
A collection of notifications for signaling important PIM
events. |
Status: current |
Access: read-only |
NOTIFICATION-GROUP |
|
|
|
hmPIMV2MIBGroup |
1.3.6.1.4.1.248.15.4.99.2.2.2 |
A collection of objects to support management of PIM Sparse
Mode (version 2) routers. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
hmPIMDenseV2MIBGroup |
1.3.6.1.4.1.248.15.4.99.2.2.5 |
A collection of objects to support management of PIM Dense
Mode (version 2) routers. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
hmPIMV2CandidateRPMIBGroup |
1.3.6.1.4.1.248.15.4.99.2.2.3 |
A collection of objects to support configuration of which
groups a router is to advertise itself as a Candidate-RP. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
hmPIMV1MIBGroup |
1.3.6.1.4.1.248.15.4.99.2.2.4 |
A collection of objects to support management of PIM
(version 1) routers. |
Status: deprecated |
Access: read-only |
OBJECT-GROUP |
|
|
|
hmPIMNextHopGroup |
1.3.6.1.4.1.248.15.4.99.2.2.6 |
A collection of optional objects to provide per-next hop
information for diagnostic purposes. Supporting this group
may add a large number of instances to a tree walk, but the
information in this group can be extremely useful in
tracking down multicast connectivity problems. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
hmPIMAssertGroup |
1.3.6.1.4.1.248.15.4.99.2.2.7 |
A collection of optional objects to provide extra
information about the assert election process. There is no
protocol reason to keep such information, but some
implementations may already keep this information and make
it available. These objects can also be very useful in
debugging connectivity or duplicate packet problems,
especially if the assert winner does not support the PIM and
IP Multicast MIBs. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|