HIPATH-WIRELESS-BRANCH-OFFICE-MIB

File: HIPATH-WIRELESS-BRANCH-OFFICE-MIB.mib (6475 bytes)

Imported modules

HIPATH-WIRELESS-HWC-MIB HIPATH-WIRELESS-SMI SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

apIndex hiPathWirelessMgmt hiPathWirelessModules
OBJECT-GROUP MODULE-COMPLIANCE IpAddress
Integer32 OBJECT-TYPE MODULE-IDENTITY
RowStatus

Defined Types

BranchOfficeEntry  
SEQUENCE    
  boConnectMode INTEGER
  boIpAllocation INTEGER
  boStaticIpAddress IpAddress
  boStaticNetmask IpAddress
  boStaticGateway IpAddress
  boRebootOnPollFailure Integer32

BranchOfficeHWCEntry  
SEQUENCE    
  boHWCConnectOrder Integer32
  boHWCIpAddress IpAddress
  boHWCRowStatus RowStatus

Defined Values

hiPathWirelessBranchOfficeMIB 1.3.6.1.4.1.4329.15.5.4
Branch office configuration MIB for the high path wireless LAN access controller.
MODULE-IDENTITY    

hiPathWirelessBranchOfficeMib 1.3.6.1.4.1.4329.15.3.22
OBJECT IDENTIFIER    

branchOfficeObjects 1.3.6.1.4.1.4329.15.3.22.1
OBJECT IDENTIFIER    

branchOfficeTable 1.3.6.1.4.1.4329.15.3.22.1.1
Table of branch office configuration values for the access points.
OBJECT-TYPE    
  SEQUENCE OF  
    BranchOfficeEntry

branchOfficeEntry 1.3.6.1.4.1.4329.15.3.22.1.1.1
Branch office configuration values for a specific access point.
OBJECT-TYPE    
  BranchOfficeEntry  

boConnectMode 1.3.6.1.4.1.4329.15.3.22.1.1.1.1
Access point connection mode - use a static definition or service discovery.
OBJECT-TYPE    
  INTEGER autoDiscovery(1), staticConnect(2)  

boIpAllocation 1.3.6.1.4.1.4329.15.3.22.1.1.1.2
Indicates if access point is to use DHCP to acquire an IP address or has a statically configured IP address.
OBJECT-TYPE    
  INTEGER dhcp(1), static(2)  

boStaticIpAddress 1.3.6.1.4.1.4329.15.3.22.1.1.1.3
If access point is statically configured, contains the IP addres.
OBJECT-TYPE    
  IpAddress  

boStaticNetmask 1.3.6.1.4.1.4329.15.3.22.1.1.1.4
Netmask for the access point if statically configured.
OBJECT-TYPE    
  IpAddress  

boStaticGateway 1.3.6.1.4.1.4329.15.3.22.1.1.1.5
Default gateway for the access point if statically configured.
OBJECT-TYPE    
  IpAddress  

boRebootOnPollFailure 1.3.6.1.4.1.4329.15.3.22.1.1.1.6
Indicates if access point should reboot on a poll failure (disabling wireless access) or continue to provide limited local wireless service.
OBJECT-TYPE    
  Integer32  

branchOfficeHWCTable 1.3.6.1.4.1.4329.15.3.22.1.2
Contains the list of access controller IP addressIf an access point has a static.
OBJECT-TYPE    
  SEQUENCE OF  
    BranchOfficeHWCEntry

branchOfficeHWCEntry 1.3.6.1.4.1.4329.15.3.22.1.2.1
The access controller search list for an access point.
OBJECT-TYPE    
  BranchOfficeHWCEntry  

boHWCConnectOrder 1.3.6.1.4.1.4329.15.3.22.1.2.1.1
The position of the access controller in the search list.
OBJECT-TYPE    
  Integer32  

boHWCIpAddress 1.3.6.1.4.1.4329.15.3.22.1.2.1.2
IP address of the access controller.
OBJECT-TYPE    
  IpAddress  

boHWCRowStatus 1.3.6.1.4.1.4329.15.3.22.1.2.1.3
RowStatus attribute to control modification of branchOfficeHWCTable.
OBJECT-TYPE    
  RowStatus  

hiPathWirelessBranchOfficeConformance 1.3.6.1.4.1.4329.15.3.22.2
OBJECT IDENTIFIER    

hiPathWirelessBranchOfficeGroup 1.3.6.1.4.1.4329.15.3.22.2.1
Conformance group definitions for the branch office MIB.
OBJECT-GROUP    

hiPathWirelessBOConformance 1.3.6.1.4.1.4329.15.3.22.2.2
Compliance group definitions for the branch office MIB.
MODULE-COMPLIANCE    

hiPathWirelessBOObsoleteGroup 1.3.6.1.4.1.4329.15.3.22.2.3
Description.
OBJECT-GROUP