HH3C-TRANSCEIVER-INFO-MIB

File: HH3C-TRANSCEIVER-INFO-MIB.mib (24508 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
HH3C-OID-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
TruthValue	ifIndex	hh3cCommon

Defined Types

Hh3cTransceiverInfoEntry
SEQUENCE
	hh3cTransceiverHardwareType	OCTET STRING
	hh3cTransceiverType	OCTET STRING
	hh3cTransceiverWaveLength	Integer32
	hh3cTransceiverVendorName	OCTET STRING
	hh3cTransceiverSerialNumber	OCTET STRING
	hh3cTransceiverFiberDiameterType	INTEGER
	hh3cTransceiverTransferDistance	Integer32
	hh3cTransceiverDiagnostic	TruthValue
	hh3cTransceiverCurTXPower	Integer32
	hh3cTransceiverMaxTXPower	Integer32
	hh3cTransceiverMinTXPower	Integer32
	hh3cTransceiverCurRXPower	Integer32
	hh3cTransceiverMaxRXPower	Integer32
	hh3cTransceiverMinRXPower	Integer32
	hh3cTransceiverTemperature	Integer32
	hh3cTransceiverVoltage	Integer32
	hh3cTransceiverBiasCurrent	Integer32
	hh3cTransceiverTempHiAlarm	Integer32
	hh3cTransceiverTempLoAlarm	Integer32
	hh3cTransceiverTempHiWarn	Integer32
	hh3cTransceiverTempLoWarn	Integer32
	hh3cTransceiverVccHiAlarm	Integer32
	hh3cTransceiverVccLoAlarm	Integer32
	hh3cTransceiverVccHiWarn	Integer32
	hh3cTransceiverVccLoWarn	Integer32
	hh3cTransceiverBiasHiAlarm	Integer32
	hh3cTransceiverBiasLoAlarm	Integer32
	hh3cTransceiverBiasHiWarn	Integer32
	hh3cTransceiverBiasLoWarn	Integer32
	hh3cTransceiverPwrOutHiAlarm	Integer32
	hh3cTransceiverPwrOutLoAlarm	Integer32
	hh3cTransceiverPwrOutHiWarn	Integer32
	hh3cTransceiverPwrOutLoWarn	Integer32
	hh3cTransceiverRcvPwrHiAlarm	Integer32
	hh3cTransceiverRcvPwrLoAlarm	Integer32
	hh3cTransceiverRcvPwrHiWarn	Integer32
	hh3cTransceiverRcvPwrLoWarn	Integer32
	hh3cTransceiverErrors	BITS
	hh3cTransceiverVendorOUI	OCTET STRING
	hh3cTransceiverRevisionNumber	OCTET STRING

Hh3cTransceiverChannelEntry
SEQUENCE
	hh3cTransceiverChannelIndex	Integer32
	hh3cTransceiverChannelCurTXPower	Integer32
	hh3cTransceiverChannelCurRXPower	Integer32
	hh3cTransceiverChannelTemperature	Integer32
	hh3cTransceiverChannelBiasCurrent	Integer32

Defined Values

hh3cTransceiver		1.3.6.1.4.1.25506.2.70
The objects in this MIB module are used to display the information of transceiver on interface.
MODULE-IDENTITY

hh3cTransceiverInfoAdm		1.3.6.1.4.1.25506.2.70.1
OBJECT IDENTIFIER

hh3cTransceiverInfoTable		1.3.6.1.4.1.25506.2.70.1.1
This table shows transceiver information on an interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cTransceiverInfoEntry

hh3cTransceiverInfoEntry		1.3.6.1.4.1.25506.2.70.1.1.1
The entry of the hh3cTransceiverInfoTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cTransceiverInfoEntry

hh3cTransceiverHardwareType		1.3.6.1.4.1.25506.2.70.1.1.1.1
Hardware type of the interface, such as SM(single mode).
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hh3cTransceiverType		1.3.6.1.4.1.25506.2.70.1.1.1.2
Type of the interface, such as SFP/XFP/GBIC.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hh3cTransceiverWaveLength		1.3.6.1.4.1.25506.2.70.1.1.1.3
Wave length of the interface, measured in nanometer.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverVendorName		1.3.6.1.4.1.25506.2.70.1.1.1.4
Vendor name of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hh3cTransceiverSerialNumber		1.3.6.1.4.1.25506.2.70.1.1.1.5
Serial number of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING

hh3cTransceiverFiberDiameterType		1.3.6.1.4.1.25506.2.70.1.1.1.6
The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fiber9(1), fiber50(2), fiber625(3), copper(4), unknown(65535)

hh3cTransceiverTransferDistance		1.3.6.1.4.1.25506.2.70.1.1.1.7
The maximum distance which the interface can transmit, measured in meter.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverDiagnostic		1.3.6.1.4.1.25506.2.70.1.1.1.8
Indicating the digital diagnostic monitoring function.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cTransceiverCurTXPower		1.3.6.1.4.1.25506.2.70.1.1.1.9
Indicating the current transmitted power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverMaxTXPower		1.3.6.1.4.1.25506.2.70.1.1.1.10
Indicating the maximum transmitted power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverMinTXPower		1.3.6.1.4.1.25506.2.70.1.1.1.11
Indicating the minimum transmitted power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverCurRXPower		1.3.6.1.4.1.25506.2.70.1.1.1.12
Indicating the current received power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverMaxRXPower		1.3.6.1.4.1.25506.2.70.1.1.1.13
Indicating the maximum received power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverMinRXPower		1.3.6.1.4.1.25506.2.70.1.1.1.14
Indicating the minimum received power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverTemperature		1.3.6.1.4.1.25506.2.70.1.1.1.15
Indicating the current temperature. The unit is Celsius centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverVoltage		1.3.6.1.4.1.25506.2.70.1.1.1.16
Indicating the current voltage. The unit is in hundredths of V
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverBiasCurrent		1.3.6.1.4.1.25506.2.70.1.1.1.17
Indicating the current bias electric current. The unit is in hundredths of mA
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverTempHiAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.18
Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverTempLoAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.19
Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverTempHiWarn		1.3.6.1.4.1.25506.2.70.1.1.1.20
Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverTempLoWarn		1.3.6.1.4.1.25506.2.70.1.1.1.21
Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverVccHiAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.22
Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverVccLoAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.23
Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverVccHiWarn		1.3.6.1.4.1.25506.2.70.1.1.1.24
Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverVccLoWarn		1.3.6.1.4.1.25506.2.70.1.1.1.25
Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverBiasHiAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.26
Transceiver bias high alarm threshold limit in microamps.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverBiasLoAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.27
Transceiver bias low alarm threshold limit in microamps.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverBiasHiWarn		1.3.6.1.4.1.25506.2.70.1.1.1.28
Transceiver bias high warning threshold limit in microamps.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverBiasLoWarn		1.3.6.1.4.1.25506.2.70.1.1.1.29
Transceiver bias low warning threshold limit in microamps.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverPwrOutHiAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.30
Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverPwrOutLoAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.31
Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverPwrOutHiWarn		1.3.6.1.4.1.25506.2.70.1.1.1.32
Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverPwrOutLoWarn		1.3.6.1.4.1.25506.2.70.1.1.1.33
Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverRcvPwrHiAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.34
Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverRcvPwrLoAlarm		1.3.6.1.4.1.25506.2.70.1.1.1.35
Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverRcvPwrHiWarn		1.3.6.1.4.1.25506.2.70.1.1.1.36
Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverRcvPwrLoWarn		1.3.6.1.4.1.25506.2.70.1.1.1.37
Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverErrors		1.3.6.1.4.1.25506.2.70.1.1.1.38
Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31)
Status: current	Access: read-only
OBJECT-TYPE
	BITS	xcvrIOError(0), xcvrChecksum(1), xcvrTypeAndPortConfigMismatch(2), xcvrTypeNotSupported(3), wisLocalFault(4), rcvOpticalPowerFault(5), pmapmdReceiverLocalFault(6), pcsReceiveLocalFault(7), phyXSReceiveLocalFault(8), laserBiasCurrentFault(9), laserTemperatureFault(10), laserOutputPowerFault(11), txFault(12), pmapmdTransmitterLocalFault(13), pcsTransmitLocalFault(14), phyXSTransmitLocalFault(15), rxLossOfSignal(16)

hh3cTransceiverVendorOUI		1.3.6.1.4.1.25506.2.70.1.1.1.39
Vendor OUI of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

hh3cTransceiverRevisionNumber		1.3.6.1.4.1.25506.2.70.1.1.1.40
Revision number of the interface.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..255)

hh3cTransceiverChannelTable		1.3.6.1.4.1.25506.2.70.1.2
This table provides statistics about transceiver with multi-channel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cTransceiverChannelEntry

hh3cTransceiverChannelEntry		1.3.6.1.4.1.25506.2.70.1.2.1
The entry of the hh3cTransceiverChannelTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cTransceiverChannelEntry

hh3cTransceiverChannelIndex		1.3.6.1.4.1.25506.2.70.1.2.1.1
The channel index of transceiver. Indicating one channel of the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..2147483647

hh3cTransceiverChannelCurTXPower		1.3.6.1.4.1.25506.2.70.1.2.1.2
Indicating the current transmission power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverChannelCurRXPower		1.3.6.1.4.1.25506.2.70.1.2.1.3
Indicating the current received power. The unit is in hundredths of dBM.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverChannelTemperature		1.3.6.1.4.1.25506.2.70.1.2.1.4
Indicating the current temperature. The unit is Celsius centigrade.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cTransceiverChannelBiasCurrent		1.3.6.1.4.1.25506.2.70.1.2.1.5
Indicating the current bias electric current. The unit is in hundredths of mA.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32