HH3C-TE-TUNNEL-MIB

File: HH3C-TE-TUNNEL-MIB.mib (18026 bytes)

Imported modules

HH3C-OID-MIB MPLS-TC-STD-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

hh3cCommon MplsTunnelIndex MplsTunnelInstanceIndex
MplsExtendedTunnelId MplsLabel OBJECT-GROUP
MODULE-COMPLIANCE NOTIFICATION-GROUP Unsigned32
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
RowPointer

Defined Types

Hh3cTeTunnelStaticCrlspEntry  
SEQUENCE    
  hh3cTeTunnelStaticCrlspInLabel MplsLabel
  hh3cTeTunnelStaticCrlspName OCTET STRING
  hh3cTeTunnelStaticCrlspStatus INTEGER
  hh3cTeTunnelStaticCrlspRole INTEGER
  hh3cTeTunnelStaticCrlspXCPointer RowPointer

Hh3cTeTunnelCoEntry  
SEQUENCE    
  hh3cTeTunnelCoIndex MplsTunnelIndex
  hh3cTeTunnelCoLspInstance MplsTunnelInstanceIndex
  hh3cTeTunnelCoIngressLSRId MplsExtendedTunnelId
  hh3cTeTunnelCoEgressLSRId MplsExtendedTunnelId
  hh3cTeTunnelCoBiMode INTEGER
  hh3cTeTunnelCoReverseLspInstance MplsTunnelInstanceIndex
  hh3cTeTunnelCoReverseLspXCPointer RowPointer

Hh3cTeTunnelPsEntry  
SEQUENCE    
  hh3cTeTunnelPsIndex MplsTunnelIndex
  hh3cTeTunnelPsIngressLSRId MplsExtendedTunnelId
  hh3cTeTunnelPsEgressLSRId MplsExtendedTunnelId
  hh3cTeTunnelPsProtectIndex MplsTunnelIndex
  hh3cTeTunnelPsProtectIngressLSRId MplsExtendedTunnelId
  hh3cTeTunnelPsProtectEgressLSRId MplsExtendedTunnelId
  hh3cTeTunnelPsProtectType INTEGER
  hh3cTeTunnelPsRevertiveMode INTEGER
  hh3cTeTunnelPsWtrTime Unsigned32
  hh3cTeTunnelPsHoldOffTime Unsigned32
  hh3cTeTunnelPsSwitchMode INTEGER
  hh3cTeTunnelPsWorkPathStatus INTEGER
  hh3cTeTunnelPsProtectPathStatus INTEGER
  hh3cTeTunnelPsSwitchResult INTEGER

Defined Values

hh3cTeTunnel 1.3.6.1.4.1.25506.2.115
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Te Tunnel.
MODULE-IDENTITY    

hh3cTeTunnelScalars 1.3.6.1.4.1.25506.2.115.1
OBJECT IDENTIFIER    

hh3cTeTunnelMaxTunnelIndex 1.3.6.1.4.1.25506.2.115.1.1
The max value of tunnel id is permitted configure on the device.
OBJECT-TYPE    
  MplsTunnelIndex  

hh3cTeTunnelObjects 1.3.6.1.4.1.25506.2.115.2
OBJECT IDENTIFIER    

hh3cTeTunnelStaticCrlspTable 1.3.6.1.4.1.25506.2.115.2.1
This table contains information for static-crlsp, and through this to get detail information about this static-crlsp. Only support transit LSR and egress LSR.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cTeTunnelStaticCrlspEntry

hh3cTeTunnelStaticCrlspEntry 1.3.6.1.4.1.25506.2.115.2.1.1
The entry in this table describes static-crlsp information.
OBJECT-TYPE    
  Hh3cTeTunnelStaticCrlspEntry  

hh3cTeTunnelStaticCrlspInLabel 1.3.6.1.4.1.25506.2.115.2.1.1.1
This is unique label value that manualy assigned. Uniquely identifies a static-crlsp. Managers should use this to obtain detail static-crlsp information.
OBJECT-TYPE    
  MplsLabel  

hh3cTeTunnelStaticCrlspName 1.3.6.1.4.1.25506.2.115.2.1.1.2
The unique name assigned to the static-crlsp.
OBJECT-TYPE    
  OCTET STRING Size(1..15)  

hh3cTeTunnelStaticCrlspStatus 1.3.6.1.4.1.25506.2.115.2.1.1.3
Indicates the actual status of this static-crlsp, The value must be up when the static-crlsp status is up and the value must be down when the static-crlsp status is down.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

hh3cTeTunnelStaticCrlspRole 1.3.6.1.4.1.25506.2.115.2.1.1.4
This value indicate the role of this static-crlsp. This value must be transit at transit point of the tunnel, and tail at terminating point of the tunnel.
OBJECT-TYPE    
  INTEGER transit(1), tail(2)  

hh3cTeTunnelStaticCrlspXCPointer 1.3.6.1.4.1.25506.2.115.2.1.1.5
This pointer unique identify a row of mplsXCTable. This value should be zeroDotZero when the static-crlsp is down. The mplsXCTable identifies the segments that compose this tunnel, their characteristics, and relationships to each other.
OBJECT-TYPE    
  RowPointer  

hh3cTeTunnelCoTable 1.3.6.1.4.1.25506.2.115.2.2
This table contains information for Co-routed reverse crlsp and infomation of Co-routed bidirectional Tunnel Interface. If hh3cCorouteTunnelLspInstance is zero, to obtain infomation of Co-routed bidirectional Tunnel Interface, otherwise to obtain Co-routed reverse crlsp infomation.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cTeTunnelCoEntry

hh3cTeTunnelCoEntry 1.3.6.1.4.1.25506.2.115.2.2.1
The entry in this table describes Co-routed infomation of bidirectional Tunnel Interface and reserver lsp information.
OBJECT-TYPE    
  Hh3cTeTunnelCoEntry  

hh3cTeTunnelCoIndex 1.3.6.1.4.1.25506.2.115.2.2.1.1
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs that specified at originating point. This value should be equal to the value signaled in the Tunnel Id of the Session object.
OBJECT-TYPE    
  MplsTunnelIndex  

hh3cTeTunnelCoLspInstance 1.3.6.1.4.1.25506.2.115.2.2.1.2
When obtain infomation of Co-routed bidirectional Tunnel Interface, this vlaue should be zero. And this value must be LspID to obtain reverse crlsp information. Values greater than 0, but less than or equal to 65535, should be useless.
OBJECT-TYPE    
  MplsTunnelInstanceIndex  

hh3cTeTunnelCoIngressLSRId 1.3.6.1.4.1.25506.2.115.2.2.1.3
Identity the ingress LSR associated with this tunnel instance. This vlaue is equal to the LsrID of originating endpoint.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hh3cTeTunnelCoEgressLSRId 1.3.6.1.4.1.25506.2.115.2.2.1.4
Identity of the egress LSR associated with this tunnel instance. This vlaue is equal to the LsrID of terminating point.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hh3cTeTunnelCoBiMode 1.3.6.1.4.1.25506.2.115.2.2.1.5
This vlaue indicated the bidirection mode of tunnel interface. The valuemust be coroutedActive at the originating point of the tunnel and coroutedPassive at the terminating point.
OBJECT-TYPE    
  INTEGER coroutedActive(1), coroutedPassive(2)  

hh3cTeTunnelCoReverseLspInstance 1.3.6.1.4.1.25506.2.115.2.2.1.6
This value indicated the reverse lsp instance, and should be equal to obverse lsp instance.
OBJECT-TYPE    
  MplsTunnelInstanceIndex  

hh3cTeTunnelCoReverseLspXCPointer 1.3.6.1.4.1.25506.2.115.2.2.1.7
This pointer unique index to mplsXCTable of the reverse lsp. The mplsXCTable identifies the segments that compose this tunnel, their characteristics, and relationships to each other. A value of zeroDotZero indicate that there is no crlsp assigned to this.
OBJECT-TYPE    
  RowPointer  

hh3cTeTunnelPsTable 1.3.6.1.4.1.25506.2.115.2.3
This table defines some objects for managers to obtain TE tunnel Protection Switching group current status information.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cTeTunnelPsEntry

hh3cTeTunnelPsEntry 1.3.6.1.4.1.25506.2.115.2.3.1
The entry in this table describes TE tunnel Protection Switching group infromation.
OBJECT-TYPE    
  Hh3cTeTunnelPsEntry  

hh3cTeTunnelPsIndex 1.3.6.1.4.1.25506.2.115.2.3.1.1
Uniquely identifies a TE tunnel Protection Switching group instance. This value must be equal to the tunnel id of work tunnel instance.
OBJECT-TYPE    
  MplsTunnelIndex  

hh3cTeTunnelPsIngressLSRId 1.3.6.1.4.1.25506.2.115.2.3.1.2
Identity the ingress LSR associated with work tunnel instance.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hh3cTeTunnelPsEgressLSRId 1.3.6.1.4.1.25506.2.115.2.3.1.3
Identity of the egress LSR associated with work tunnel instance.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hh3cTeTunnelPsProtectIndex 1.3.6.1.4.1.25506.2.115.2.3.1.4
Uniquely identifies a TE tunnel Protection Switching group instance. This value must be equal to the tunnel id of TE tunnel Protection Switching group instance.
OBJECT-TYPE    
  MplsTunnelIndex  

hh3cTeTunnelPsProtectIngressLSRId 1.3.6.1.4.1.25506.2.115.2.3.1.5
Identity the ingress LSR associated with TE tunnel Protection Switching group instance.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hh3cTeTunnelPsProtectEgressLSRId 1.3.6.1.4.1.25506.2.115.2.3.1.6
Identity of the egress LSR associated with TE tunnel Protection Switching group instance.
OBJECT-TYPE    
  MplsExtendedTunnelId  

hh3cTeTunnelPsProtectType 1.3.6.1.4.1.25506.2.115.2.3.1.7
This value indicated TE tunnel Protection Switching group type. The default value is oneToOne.
OBJECT-TYPE    
  INTEGER oneToOne(1), onePlusOne(2)  

hh3cTeTunnelPsRevertiveMode 1.3.6.1.4.1.25506.2.115.2.3.1.8
This value indicated protect switch mode. The value must be revertive or nonRevertive, default value is revertive.
OBJECT-TYPE    
  INTEGER revertive(1), noRevertive(2)  

hh3cTeTunnelPsWtrTime 1.3.6.1.4.1.25506.2.115.2.3.1.9
The cycle time that switch to protect tunnel.
OBJECT-TYPE    
  Unsigned32 0..60  

hh3cTeTunnelPsHoldOffTime 1.3.6.1.4.1.25506.2.115.2.3.1.10
This value is switchback delay time. When detected the work path fault, switch to protect path after this time.
OBJECT-TYPE    
  Unsigned32 0..20  

hh3cTeTunnelPsSwitchMode 1.3.6.1.4.1.25506.2.115.2.3.1.11
This value indicated TE tunnel Protection Switching group switch mode.
OBJECT-TYPE    
  INTEGER uniDirectional(1), biDirectional(2)  

hh3cTeTunnelPsWorkPathStatus 1.3.6.1.4.1.25506.2.115.2.3.1.12
This value indicates work path status. none, noDefect, inDefect will be used.
OBJECT-TYPE    
  INTEGER none(1), noDefect(2), inDefect(3)  

hh3cTeTunnelPsProtectPathStatus 1.3.6.1.4.1.25506.2.115.2.3.1.13
This value indicates protect path status. none, noDefect, inDefect(3) will be used.
OBJECT-TYPE    
  INTEGER none(1), noDefect(2), inDefect(3)  

hh3cTeTunnelPsSwitchResult 1.3.6.1.4.1.25506.2.115.2.3.1.14
This value indicated current using path is work path or protect path.
OBJECT-TYPE    
  INTEGER workPath(1), protectPath(2)  

hh3cTeTunnelNotifications 1.3.6.1.4.1.25506.2.115.3
OBJECT IDENTIFIER    

hh3cTeTunnelNotificationsPrefix 1.3.6.1.4.1.25506.2.115.3.0
OBJECT IDENTIFIER    

hh3cTeTunnelPsSwitchWtoP 1.3.6.1.4.1.25506.2.115.3.0.1
This notification is generated when protect workgroup switch from work tunnel to protect tunnel.
NOTIFICATION-TYPE    

hh3cTeTunnelPsSwitchPtoW 1.3.6.1.4.1.25506.2.115.3.0.2
This notification is generated when protect workgroup switch from protect tunnel to work tunnel.
NOTIFICATION-TYPE    

hh3cTeTunnelConformance 1.3.6.1.4.1.25506.2.115.4
OBJECT IDENTIFIER    

hh3cTeTunnelCompliances 1.3.6.1.4.1.25506.2.115.4.1
OBJECT IDENTIFIER    

hh3cTeTunnelCompliance 1.3.6.1.4.1.25506.2.115.4.1.1
The compliance statement for SNMP.
MODULE-COMPLIANCE    

hh3cTeTunnelGroups 1.3.6.1.4.1.25506.2.115.4.2
OBJECT IDENTIFIER    

hh3cTeTunnelNotificationsGroup 1.3.6.1.4.1.25506.2.115.4.2.1
This group contains MPLS Te Tunnel traps.
NOTIFICATION-GROUP    

hh3cTeTunnelScalarsGroup 1.3.6.1.4.1.25506.2.115.4.2.2
Scalar object needed to implement MPLS te tunnels.
OBJECT-GROUP    

hh3cTeTunnelStaticCrlspGroup 1.3.6.1.4.1.25506.2.115.4.2.3
Objects for quering static-crlsp information.
OBJECT-GROUP    

hh3cTeTunnelCorouteGroup 1.3.6.1.4.1.25506.2.115.4.2.4
Objects for quering Co-routed reverse crlsp information.
OBJECT-GROUP    

hh3cTeTunnelPsGroup 1.3.6.1.4.1.25506.2.115.4.2.5
Objects for quering protect workgroup information.
OBJECT-GROUP