HH3C-SNA-DLSW-MIB

File: HH3C-SNA-DLSW-MIB.mib (53452 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI SNMPv2-CONF
RFC1213-MIB HH3C-OID-MIB

Imported symbols

DisplayString RowPointer TruthValue
TEXTUAL-CONVENTION Counter32 Gauge32
IpAddress TimeTicks OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP ifIndex
hh3cRhw

Defined Types

MacAddressNC  
TEXTUAL-CONVENTION    
  current STRING Size(06)

EndStationLocation  
TEXTUAL-CONVENTION    
  current INTEGER other(1), internal(2), remote(3), local(4)

DlcType  
TEXTUAL-CONVENTION    
  current INTEGER other(1), na(2), llc(3), sdlc(4), qllc(5)

LFSize  
TEXTUAL-CONVENTION    
  current INTEGER lfs516(516), lfs1470(1470), lfs1500(1500), lfs2052(2052), lfs4472(4472), lfs8144(8144), lfs11407(11407), lfs11454(11454), lfs17800(17800), unknown(65535)

CreateLineFlag  
INTEGER createLine(1), deleteLine(2)    

EntryStatus  
INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)    

Hh3cDlswRemotePeerEntry  
SEQUENCE    
  hh3cdlswRemotePeerAddr IpAddress
  hh3cdlswRemotePeerVersion STRING
  hh3cdlswRemotePeerVendorID STRING
  hh3cdlswRemotePeerPaceWindInit INTEGER
  hh3cdlswRemotePeerVersionString DisplayString
  hh3cdlswRemotePeerIsConfig INTEGER
  hh3cdlswRemotePeerCost INTEGER
  hh3cdlswRemotePeerKeepAlive INTEGER
  hh3cdlswRemotePeerLf LFSize
  hh3cdlswRemotePeerTcpQueneMax INTEGER
  hh3cdlswRemotePeerHaveBackup INTEGER
  hh3cdlswRemotePeerIsBackup INTEGER
  hh3cdlswRemotePeerBackupAddr IpAddress
  hh3cdlswRemotePeerLinger INTEGER
  hh3cdlswRemotePeerLinkState INTEGER
  hh3cdlswRemotePeerRecvPacks Counter32
  hh3cdlswRemotePeerSendPacks Counter32
  hh3cdlswRemotePeerDrops Counter32
  hh3cdlswRemotePeerUptime Counter32
  hh3cdlswRemotePeerEntryStatus EntryStatus

Hh3cDlswBridgeEntry  
SEQUENCE    
  hh3cdlswBridgeNum INTEGER
  hh3cdlswBridgeStatus CreateLineFlag

Hh3cDlswBridgeIfEntry  
SEQUENCE    
  hh3cdlswBridgeIfBriGru INTEGER
  hh3cdlswBridgeIfName DisplayString
  hh3cdlswBridgeIfStatus EntryStatus

Hh3cDlswLocMacEntry  
SEQUENCE    
  hh3cdlswLocMacHashIndex INTEGER
  hh3cdlswLocMacHashIndexSeqNum INTEGER
  hh3cdlswLocMacMac MacAddressNC
  hh3cdlswLocMacLocalInterfaceName DisplayString

Hh3cDlswCircuitEntry  
SEQUENCE    
  hh3cdlswCircuitS1CircuitId INTEGER
  hh3cdlswCircuitS1Mac MacAddressNC
  hh3cdlswCircuitS1Sap STRING
  hh3cdlswCircuitS2Mac MacAddressNC
  hh3cdlswCircuitS2Sap STRING
  hh3cdlswCircuitS1IfIndex INTEGER
  hh3cdlswCircuitS1Ifname DisplayString
  hh3cdlswCircuitS1DlcType DlcType
  hh3cdlswCircuitS2TAddress IpAddress
  hh3cdlswCircuitS2CircuitId INTEGER
  hh3cdlswCircuitOrigin INTEGER
  hh3cdlswCircuitEntryTime TimeTicks
  hh3cdlswCircuitStateTime TimeTicks
  hh3cdlswCircuitState INTEGER
  hh3cdlswCircuitFCSendGrantedUnits INTEGER
  hh3cdlswCircuitFCSendCurrentWndw INTEGER
  hh3cdlswCircuitFCRecvGrantedUnits INTEGER
  hh3cdlswCircuitFCRecvCurrentWndw INTEGER

Hh3cDlswSdlcPortEntry  
SEQUENCE    
  hh3cdlswSdlcPortSerialName DisplayString
  hh3cdlswSdlcPortEncap INTEGER
  hh3cdlswSdlcPortRole INTEGER
  hh3cdlswSdlcPortVmac MacAddressNC
  hh3cdlswSdlcPortHoldq INTEGER
  hh3cdlswSdlcPortK INTEGER
  hh3cdlswSdlcPortModule INTEGER
  hh3cdlswSdlcPortN1 INTEGER
  hh3cdlswSdlcPortN2 INTEGER
  hh3cdlswSdlcPortPollPauseTimer INTEGER
  hh3cdlswSdlcPortSimultaneousEnable INTEGER
  hh3cdlswSdlcPortT1 INTEGER
  hh3cdlswSdlcPortT2 INTEGER

Hh3cDlswSdlcLsEntry  
SEQUENCE    
  hh3cdlswSdlcLsAddress INTEGER
  hh3cdlswSdlcLsLocalId INTEGER
  hh3cdlswSdlcLsRemoteMac MacAddressNC
  hh3cdlswSdlcLsSsap INTEGER
  hh3cdlswSdlcLsDsap INTEGER
  hh3cdlswSdlcLsStatus EntryStatus

Hh3cDlswLlc2PortEntry  
SEQUENCE    
  hh3cdlswLLC2PortAckDelayTime INTEGER
  hh3cdlswLLC2PortAckMax INTEGER
  hh3cdlswLLC2PortLocalWnd INTEGER
  hh3cdlswLLC2PortModulus INTEGER
  hh3cdlswLLC2PortN2 INTEGER
  hh3cdlswLLC2PortT1 INTEGER
  hh3cdlswLLC2PortTbusyTime INTEGER
  hh3cdlswLLC2PortTpfTime INTEGER
  hh3cdlswLLC2PortTrejTime INTEGER
  hh3cdlswLLC2PortTxqMax INTEGER

Defined Values

hh3cdlsw 1.3.6.1.4.1.25506.8.37
private MIB for dlsw
MODULE-IDENTITY    

hh3cdlswNode 1.3.6.1.4.1.25506.8.37.1
OBJECT IDENTIFIER    

hh3cdlswTConn 1.3.6.1.4.1.25506.8.37.2
OBJECT IDENTIFIER    

hh3cdlswBridgeGroup 1.3.6.1.4.1.25506.8.37.3
OBJECT IDENTIFIER    

hh3cdlswLocDirectory 1.3.6.1.4.1.25506.8.37.4
OBJECT IDENTIFIER    

hh3cdlswCircuit 1.3.6.1.4.1.25506.8.37.5
OBJECT IDENTIFIER    

hh3cdlswSdlc 1.3.6.1.4.1.25506.8.37.6
OBJECT IDENTIFIER    

hh3cdlswLlc2 1.3.6.1.4.1.25506.8.37.7
OBJECT IDENTIFIER    

hh3cdlswNodeVersion 1.3.6.1.4.1.25506.8.37.1.1
This value identifies the particular version of the DLSw standard supported by this DLSw. The first octet is a hexadecimal value representing the DLSw standard Version number of this DLSw, and the second is a hexadecimal value representing the DLSw standard Release number. This information is reported in DLSw Capabilities Exchange.
OBJECT-TYPE    
  STRING Size(2)  

hh3cdlswNodeVendorID 1.3.6.1.4.1.25506.8.37.1.2
The value identifies the manufacturer's IEEE-assigned organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
OBJECT-TYPE    
  STRING Size(3)  

hh3cdlswNodeVersionString 1.3.6.1.4.1.25506.8.37.1.3
This string gives product-specific information about this DLSw (e.g., product name, code release and fix level). This flows in Capabilities Exchange messages.
OBJECT-TYPE    
  DisplayString  

hh3cdlswNodeStdPacingSupport 1.3.6.1.4.1.25506.8.37.1.4
Circuit pacing, as defined in the DLSw Standard, allows each of the two DLSw nodes on a circuit to control the amount of data the other is permitted to send to them. This object reflects the level of support the DLSw node has for this protocol. (1) means the node has no support for the standard circuit pacing flows; it may use RFC 1434+ methods only, or a proprietary flow control scheme. (2) means the node supports the standard scheme and can vary the window sizes it grants as a data receiver. (3) means the node supports the standard scheme but never varies its receive window size.
OBJECT-TYPE    
  INTEGER none(1), adaptiveRcvWindow(2), fixedRcvWindow(3), unknown(65535)  

hh3cdlswNodeStatus 1.3.6.1.4.1.25506.8.37.1.5
The status of the DLSw part of the system.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

hh3cdlswNodeVirtualSegmentLFSize 1.3.6.1.4.1.25506.8.37.1.6
The largest frame size (including DLC header and info field but not any MAC-level or framing octets) this DLSw can forward on any path through itself. This object can represent any box- level frame size forwarding restriction (e.g., from the use of fixed-size buffers). Some DLSw implementations will have no such restriction. This value will affect the LF size of circuits during circuit creation. The LF size of an existing circuit can be found in the RIF (Routing Information Field).
OBJECT-TYPE    
  LFSize  

hh3cdlswNodeLocalAddr 1.3.6.1.4.1.25506.8.37.1.7
Local peer ip address.
OBJECT-TYPE    
  IpAddress  

hh3cdlswNodePriority 1.3.6.1.4.1.25506.8.37.1.8
The priority value of local peer. 65535 expresses the value is unknown
OBJECT-TYPE    
  INTEGER 1..5 | 65535  

hh3cdlswNodeInitWindow 1.3.6.1.4.1.25506.8.37.1.9
The vlaue of init-window. 65535 expresses the value is unknown
OBJECT-TYPE    
  INTEGER 1..2000 | 65535  

hh3cdlswNodeKeepAlive 1.3.6.1.4.1.25506.8.37.1.10
The vlaue of keepalive interval. 65535 expresses the value is unknown
OBJECT-TYPE    
  INTEGER 1..2000 | 65535  

hh3cdlswNodeMaxWindow 1.3.6.1.4.1.25506.8.37.1.11
The value of max-window. 65535 expresses the value is unknown
OBJECT-TYPE    
  INTEGER 1..2000 | 65535  

hh3cdlswNodePermitDynamic 1.3.6.1.4.1.25506.8.37.1.12
To accept connections from non-configured remote peers when permit-dynamic is setted.
OBJECT-TYPE    
  INTEGER permit-dynamic(1), forbid-dynamic(2), unknown(65535)  

hh3cdlswNodeConnTimeout 1.3.6.1.4.1.25506.8.37.1.13
Define connected state timer(The unit is a thousandth of a second).
OBJECT-TYPE    
  INTEGER 1..65535  

hh3cdlswNodeLocalPendTimeout 1.3.6.1.4.1.25506.8.37.1.14
Define connected state timer(The unit is a thousandth of a second).
OBJECT-TYPE    
  INTEGER 1..65535  

hh3cdlswNodeRemotePendTimeout 1.3.6.1.4.1.25506.8.37.1.15
Define connected state timer(The unit is a thousandth of a second).
OBJECT-TYPE    
  INTEGER 1..65535  

hh3cdlswNodeSnaCacheTimeout 1.3.6.1.4.1.25506.8.37.1.16
Define connected state timer(The unit is a thousandth of a second).
OBJECT-TYPE    
  INTEGER 1..65535  

hh3cdlswRemotePeerTable 1.3.6.1.4.1.25506.8.37.2.1
A list of tcp transport connections.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDlswRemotePeerEntry

hh3cdlswRemotePeerEntry 1.3.6.1.4.1.25506.8.37.2.1.1
A list of remote peer information
OBJECT-TYPE    
  Hh3cDlswRemotePeerEntry  

hh3cdlswRemotePeerAddr 1.3.6.1.4.1.25506.8.37.2.1.1.1
The remote peer address for this transport connection.
OBJECT-TYPE    
  IpAddress  

hh3cdlswRemotePeerVersion 1.3.6.1.4.1.25506.8.37.2.1.1.2
This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a hh3cdlswTConnOperState of `connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep hh3cdlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
OBJECT-TYPE    
  STRING Size(2)  

hh3cdlswRemotePeerVendorID 1.3.6.1.4.1.25506.8.37.2.1.1.3
This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep hh3cdlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
OBJECT-TYPE    
  STRING Size(3)  

hh3cdlswRemotePeerPaceWindInit 1.3.6.1.4.1.25506.8.37.2.1.1.4
The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified and granted by the first flow control indication the partner sends on each circuit. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A value of zero is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep hh3cdlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
OBJECT-TYPE    
  INTEGER  

hh3cdlswRemotePeerVersionString 1.3.6.1.4.1.25506.8.37.2.1.1.5
This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string is vendor-specific. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, if one is never received, or if one is received but it does not contain a version string. If an implementation chooses to keep hh3cdlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
OBJECT-TYPE    
  DisplayString  

hh3cdlswRemotePeerIsConfig 1.3.6.1.4.1.25506.8.37.2.1.1.6
The current remote peer is configrured when the value is 'yes'.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hh3cdlswRemotePeerCost 1.3.6.1.4.1.25506.8.37.2.1.1.7
The cost for remote peer.
OBJECT-TYPE    
  INTEGER 1..5  

hh3cdlswRemotePeerKeepAlive 1.3.6.1.4.1.25506.8.37.2.1.1.8
The keepalive interval value.
OBJECT-TYPE    
  INTEGER 1..60000  

hh3cdlswRemotePeerLf 1.3.6.1.4.1.25506.8.37.2.1.1.9
The the largest frame size.
OBJECT-TYPE    
  LFSize  

hh3cdlswRemotePeerTcpQueneMax 1.3.6.1.4.1.25506.8.37.2.1.1.10
The max tcp queue value.
OBJECT-TYPE    
  INTEGER 50..2000  

hh3cdlswRemotePeerHaveBackup 1.3.6.1.4.1.25506.8.37.2.1.1.11
There is another remote peer whitch is configrued as the backup of the current remote peer .
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hh3cdlswRemotePeerIsBackup 1.3.6.1.4.1.25506.8.37.2.1.1.12
The current remote peer is configrued as the backup of another configured remote peer .
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

hh3cdlswRemotePeerBackupAddr 1.3.6.1.4.1.25506.8.37.2.1.1.13
It is the IP ADDRESS of an configured remote peer of whitch the current remote peer is configrued as the backup
OBJECT-TYPE    
  IpAddress  

hh3cdlswRemotePeerLinger 1.3.6.1.4.1.25506.8.37.2.1.1.14
Buckup Peer linger
OBJECT-TYPE    
  INTEGER 0..1440  

hh3cdlswRemotePeerLinkState 1.3.6.1.4.1.25506.8.37.2.1.1.15
The state of this tcp transport connection.
OBJECT-TYPE    
  INTEGER connecting(1), initCapExchange(2), connected(3), quiescing(4), disconnecting(5), disconnected(6)  

hh3cdlswRemotePeerRecvPacks 1.3.6.1.4.1.25506.8.37.2.1.1.16
The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.
OBJECT-TYPE    
  Counter32  

hh3cdlswRemotePeerSendPacks 1.3.6.1.4.1.25506.8.37.2.1.1.17
The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection.
OBJECT-TYPE    
  Counter32  

hh3cdlswRemotePeerDrops 1.3.6.1.4.1.25506.8.37.2.1.1.18
The number of Switch-to-Switch Protocol (SSP) messages dropped on this tcp transport connection.
OBJECT-TYPE    
  Counter32  

hh3cdlswRemotePeerUptime 1.3.6.1.4.1.25506.8.37.2.1.1.19
The amount of time (in seconds ) since this transport connection last entered the 'connected' state.
OBJECT-TYPE    
  Counter32  

hh3cdlswRemotePeerEntryStatus 1.3.6.1.4.1.25506.8.37.2.1.1.20
This object is used by the manager to create or delete the row entry in the hh3cdlswRemotePeerTable following the EntryStatus textual convention.
OBJECT-TYPE    
  EntryStatus  

hh3cdlswBridgeTable 1.3.6.1.4.1.25506.8.37.3.1
The list of bridge group whitch has been created.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDlswBridgeEntry

hh3cdlswBridgeEntry 1.3.6.1.4.1.25506.8.37.3.1.1
The list of bridge information
OBJECT-TYPE    
  Hh3cDlswBridgeEntry  

hh3cdlswBridgeNum 1.3.6.1.4.1.25506.8.37.3.1.1.1
This value identifies the bridge number .
OBJECT-TYPE    
  INTEGER 1..63  

hh3cdlswBridgeStatus 1.3.6.1.4.1.25506.8.37.3.1.1.2
This value whitch is equal to 'DeleteLine' identifies to delete a conceptual raw.
OBJECT-TYPE    
  CreateLineFlag  

hh3cdlswBridgeIfTable 1.3.6.1.4.1.25506.8.37.3.2
The list of interfaces on which DLSw is active.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDlswBridgeIfEntry

hh3cdlswBridgeIfEntry 1.3.6.1.4.1.25506.8.37.3.2.1
The list of bridge interface information
OBJECT-TYPE    
  Hh3cDlswBridgeIfEntry  

hh3cdlswBridgeIfBriGru 1.3.6.1.4.1.25506.8.37.3.2.1.1
This value identifies the bridge number attached to the interface.
OBJECT-TYPE    
  INTEGER 1..63  

hh3cdlswBridgeIfName 1.3.6.1.4.1.25506.8.37.3.2.1.2
The name of the interface.
OBJECT-TYPE    
  DisplayString  

hh3cdlswBridgeIfStatus 1.3.6.1.4.1.25506.8.37.3.2.1.3
This value whitch is equal to 'invalid' identifies to delete a conceptual raw
OBJECT-TYPE    
  EntryStatus  

hh3cdlswLocMacTable 1.3.6.1.4.1.25506.8.37.4.1
This table contains locations of MAC addresses. They are local and reachable
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDlswLocMacEntry

hh3cdlswLocMacEntry 1.3.6.1.4.1.25506.8.37.4.1.1
Tok_String
OBJECT-TYPE    
  Hh3cDlswLocMacEntry  

hh3cdlswLocMacHashIndex 1.3.6.1.4.1.25506.8.37.4.1.1.1
The hash value.
OBJECT-TYPE    
  INTEGER  

hh3cdlswLocMacHashIndexSeqNum 1.3.6.1.4.1.25506.8.37.4.1.1.2
The sequence num with smae hash value.
OBJECT-TYPE    
  INTEGER  

hh3cdlswLocMacMac 1.3.6.1.4.1.25506.8.37.4.1.1.3
The MAC address.
OBJECT-TYPE    
  MacAddressNC  

hh3cdlswLocMacLocalInterfaceName 1.3.6.1.4.1.25506.8.37.4.1.1.4
The value is the interface name when hh3cdlswLocMacLocationType is 'local'.
OBJECT-TYPE    
  DisplayString  

hh3cdlswCircuitTable 1.3.6.1.4.1.25506.8.37.5.1
This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row associated with each data link. Thus, for circuits without an intervening transport connection, there are two conceptual rows for each circuit. The table consists of the circuits being established, established, and as an implementation option, circuits that have been disconnected. For circuits carried over transport connections, an entry is created after the CUR_cs was sent or received. For circuits between two locally attached devices, or internal virtual MAC addresses, an entry is created when the equivalent of CUR_cs sent/received status is reached. End station 1 (S1) and End station 2 (S2) are used to represent the two end stations of the circuit. S1 is always an end station which is locally attached. S2 may be locally attached or remote. If it is locally attached, the circuit will be represented by two rows indexed by (A, B) and (B, A) where A & B are the relevant MACs/SAPs. The table may be used to store the causes of disconnection of circuits. It is recommended that the oldest disconnected circuit entry be removed from this table when the memory space of disconnected circuits is needed.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDlswCircuitEntry

hh3cdlswCircuitEntry 1.3.6.1.4.1.25506.8.37.5.1.1
the list of circuit information
OBJECT-TYPE    
  Hh3cDlswCircuitEntry  

hh3cdlswCircuitS1CircuitId 1.3.6.1.4.1.25506.8.37.5.1.1.1
The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length.
OBJECT-TYPE    
  INTEGER  

hh3cdlswCircuitS1Mac 1.3.6.1.4.1.25506.8.37.5.1.1.2
The MAC Address of End Station 1 (S1) used for this circuit.
OBJECT-TYPE    
  MacAddressNC  

hh3cdlswCircuitS1Sap 1.3.6.1.4.1.25506.8.37.5.1.1.3
The SAP at End Station 1 (S1) used for this circuit.
OBJECT-TYPE    
  STRING Size(1)  

hh3cdlswCircuitS2Mac 1.3.6.1.4.1.25506.8.37.5.1.1.4
The MAC Address of End Station 2 (S2) used for this circuit.
OBJECT-TYPE    
  MacAddressNC  

hh3cdlswCircuitS2Sap 1.3.6.1.4.1.25506.8.37.5.1.1.5
The SAP at End Station 2 (S2) used for this circuit.
OBJECT-TYPE    
  STRING Size(1)  

hh3cdlswCircuitS1IfIndex 1.3.6.1.4.1.25506.8.37.5.1.1.6
The ifEntry index of the local interface through which S1 can be reached.
OBJECT-TYPE    
  INTEGER 0..2147483647  

hh3cdlswCircuitS1Ifname 1.3.6.1.4.1.25506.8.37.5.1.1.7
The name of the interface whose Ifdex is hh3cdlswCircuitS1IfIndex.
OBJECT-TYPE    
  DisplayString  

hh3cdlswCircuitS1DlcType 1.3.6.1.4.1.25506.8.37.5.1.1.8
The DLC protocol in use between the DLSw node and S1.
OBJECT-TYPE    
  DlcType  

hh3cdlswCircuitS2TAddress 1.3.6.1.4.1.25506.8.37.5.1.1.9
If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length.
OBJECT-TYPE    
  IpAddress  

hh3cdlswCircuitS2CircuitId 1.3.6.1.4.1.25506.8.37.5.1.1.10
The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length.
OBJECT-TYPE    
  INTEGER  

hh3cdlswCircuitOrigin 1.3.6.1.4.1.25506.8.37.5.1.1.11
This object specifies which of the two end stations initiated the establishment of this circuit.
OBJECT-TYPE    
  INTEGER s1(1), s2(2)  

hh3cdlswCircuitEntryTime 1.3.6.1.4.1.25506.8.37.5.1.1.12
The amount of time (in hundredths of a second) since this circuit table conceptual row was created.
OBJECT-TYPE    
  TimeTicks  

hh3cdlswCircuitStateTime 1.3.6.1.4.1.25506.8.37.5.1.1.13
The amount of time (in hundredths of a second) since this circuit entered the current state.
OBJECT-TYPE    
  TimeTicks  

hh3cdlswCircuitState 1.3.6.1.4.1.25506.8.37.5.1.1.14
The current state of this circuit. The agent, implementation specific, may choose to keep entries for some period of time after circuit disconnect, so the manager can gather the time and cause of disconnection. While all of the specified values may be returned from a GET operation, the only SETable value is `disconnectPending'. When this value is set, DLSw should perform the appropriate action given its previous state (e.g., send HALT_DL if the state was `connected') to bring the circuit down to the `disconnected' state. Both the partner DLSw and local end station(s) should be notified as appropriate. This MIB provides no facility to re-establish a disconnected circuit, because in DLSw this should be an end station-driven function.
OBJECT-TYPE    
  INTEGER disconnected(1), circuitStart(2), resolvePending(3), circuitPending(4), circuitEstablished(5), connectPending(6), contactPending(7), connected(8), disconnectPending(9), haltPending(10), haltPendingNoack(11), circuitRestart(12), restartPending(13)  

hh3cdlswCircuitFCSendGrantedUnits 1.3.6.1.4.1.25506.8.37.5.1.1.15
The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control indication from the partner DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
OBJECT-TYPE    
  INTEGER 0..65535  

hh3cdlswCircuitFCSendCurrentWndw 1.3.6.1.4.1.25506.8.37.5.1.1.16
The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is authorized to send, if it were to receive a flow control indication with the bits specifying `repeat window'. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
OBJECT-TYPE    
  INTEGER 0..65535  

hh3cdlswCircuitFCRecvGrantedUnits 1.3.6.1.4.1.25506.8.37.5.1.1.17
The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for an additional flow control indication from this DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
OBJECT-TYPE    
  INTEGER 0..65535  

hh3cdlswCircuitFCRecvCurrentWndw 1.3.6.1.4.1.25506.8.37.5.1.1.18
The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be authorizing its DLSw partner to send, if this DLSw were to send a flow control indication with the bits specifying `repeat window'. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
OBJECT-TYPE    
  INTEGER 0..65535  

hh3cdlswSdlcPortTable 1.3.6.1.4.1.25506.8.37.6.1
The table defines parameters for the interfaces with the encapunation of SDLC.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDlswSdlcPortEntry

hh3cdlswSdlcPortEntry 1.3.6.1.4.1.25506.8.37.6.1.1
Tok_String
OBJECT-TYPE    
  Hh3cDlswSdlcPortEntry  

hh3cdlswSdlcPortSerialName 1.3.6.1.4.1.25506.8.37.6.1.1.1
The name of serial port.
OBJECT-TYPE    
  DisplayString  

hh3cdlswSdlcPortEncap 1.3.6.1.4.1.25506.8.37.6.1.1.2
The encapunation of the interface.
OBJECT-TYPE    
  INTEGER sdlc(1), ppp(2), other(3)  

hh3cdlswSdlcPortRole 1.3.6.1.4.1.25506.8.37.6.1.1.3
The SDLC role of interface.
OBJECT-TYPE    
  INTEGER primary(1), seconday(2), norole(3)  

hh3cdlswSdlcPortVmac 1.3.6.1.4.1.25506.8.37.6.1.1.4
Define virtual mac address.
OBJECT-TYPE    
  MacAddressNC  

hh3cdlswSdlcPortHoldq 1.3.6.1.4.1.25506.8.37.6.1.1.5
Size of hold queue.
OBJECT-TYPE    
  INTEGER 20..255  

hh3cdlswSdlcPortK 1.3.6.1.4.1.25506.8.37.6.1.1.6
Size of local send window.
OBJECT-TYPE    
  INTEGER 1..7  

hh3cdlswSdlcPortModule 1.3.6.1.4.1.25506.8.37.6.1.1.7
Size of modulus.
OBJECT-TYPE    
  INTEGER m8(8), m128(128)  

hh3cdlswSdlcPortN1 1.3.6.1.4.1.25506.8.37.6.1.1.8
Max number of bits for incoming frames.
OBJECT-TYPE    
  INTEGER 1..17680  

hh3cdlswSdlcPortN2 1.3.6.1.4.1.25506.8.37.6.1.1.9
Number of timers to retry an operation.
OBJECT-TYPE    
  INTEGER 1..255  

hh3cdlswSdlcPortPollPauseTimer 1.3.6.1.4.1.25506.8.37.6.1.1.10
Time between polls for each secondary SDLC station. The unit is thousandth of a second.
OBJECT-TYPE    
  INTEGER 1..10000  

hh3cdlswSdlcPortSimultaneousEnable 1.3.6.1.4.1.25506.8.37.6.1.1.11
Activate SDLC two-way simultaneous mode.
OBJECT-TYPE    
  INTEGER enable(1), disenable(2)  

hh3cdlswSdlcPortT1 1.3.6.1.4.1.25506.8.37.6.1.1.12
Time to wait for a reply to a frame.
OBJECT-TYPE    
  INTEGER 1..60000  

hh3cdlswSdlcPortT2 1.3.6.1.4.1.25506.8.37.6.1.1.13
Time to wait for a reply used by secondary station.
OBJECT-TYPE    
  INTEGER 1..60000  

hh3cdlswSdlcLsTable 1.3.6.1.4.1.25506.8.37.6.2
The table defines the virtual MAC addresses for those SDLC link stations that participate in data link switching.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDlswSdlcLsEntry

hh3cdlswSdlcLsEntry 1.3.6.1.4.1.25506.8.37.6.2.1
Tok_String
OBJECT-TYPE    
  Hh3cDlswSdlcLsEntry  

hh3cdlswSdlcLsAddress 1.3.6.1.4.1.25506.8.37.6.2.1.1
Define SDLC address.
OBJECT-TYPE    
  INTEGER 1..254  

hh3cdlswSdlcLsLocalId 1.3.6.1.4.1.25506.8.37.6.2.1.2
The value is XID.
OBJECT-TYPE    
  INTEGER 0..2147483647  

hh3cdlswSdlcLsRemoteMac 1.3.6.1.4.1.25506.8.37.6.2.1.3
The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned
OBJECT-TYPE    
  MacAddressNC  

hh3cdlswSdlcLsSsap 1.3.6.1.4.1.25506.8.37.6.2.1.4
Source SAP of partner.
OBJECT-TYPE    
  INTEGER 1..254  

hh3cdlswSdlcLsDsap 1.3.6.1.4.1.25506.8.37.6.2.1.5
Destination SAP of partner.
OBJECT-TYPE    
  INTEGER 1..254  

hh3cdlswSdlcLsStatus 1.3.6.1.4.1.25506.8.37.6.2.1.6
This object is used by the manager to create or delete the row entry in the hh3cdlswSdlcLsTable following the EntryStatus textual convention.
OBJECT-TYPE    
  EntryStatus  

hh3cdlswLlc2PortTable 1.3.6.1.4.1.25506.8.37.7.1
The table defines parameters for the interfaces with the encapunation of Llc2.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDlswLlc2PortEntry

hh3cdlswLlc2PortEntry 1.3.6.1.4.1.25506.8.37.7.1.1
Tok_String
OBJECT-TYPE    
  Hh3cDlswLlc2PortEntry  

hh3cdlswLLC2PortAckDelayTime 1.3.6.1.4.1.25506.8.37.7.1.1.1
Max time allows I-frames incoming without replay ACK.
OBJECT-TYPE    
  INTEGER 1..60000  

hh3cdlswLLC2PortAckMax 1.3.6.1.4.1.25506.8.37.7.1.1.2
Max number of I-frames received before ACK.
OBJECT-TYPE    
  INTEGER 1..127  

hh3cdlswLLC2PortLocalWnd 1.3.6.1.4.1.25506.8.37.7.1.1.3
Max number of I-frames to send before received ACK.
OBJECT-TYPE    
  INTEGER 1..127  

hh3cdlswLLC2PortModulus 1.3.6.1.4.1.25506.8.37.7.1.1.4
Modulus of LLC2.
OBJECT-TYPE    
  INTEGER m8(8), m128(128)  

hh3cdlswLLC2PortN2 1.3.6.1.4.1.25506.8.37.7.1.1.5
Retry times of operations.
OBJECT-TYPE    
  INTEGER 1..255  

hh3cdlswLLC2PortT1 1.3.6.1.4.1.25506.8.37.7.1.1.6
Waiting for ACK time after sent a I-frame.
OBJECT-TYPE    
  INTEGER 1..60000  

hh3cdlswLLC2PortTbusyTime 1.3.6.1.4.1.25506.8.37.7.1.1.7
Waiting time while other LLC2 station is in busy state.
OBJECT-TYPE    
  INTEGER 1..60000  

hh3cdlswLLC2PortTpfTime 1.3.6.1.4.1.25506.8.37.7.1.1.8
Waiting time after a P frame is sent.
OBJECT-TYPE    
  INTEGER 1..60000  

hh3cdlswLLC2PortTrejTime 1.3.6.1.4.1.25506.8.37.7.1.1.9
Waiting time after a REJ frame is sent.
OBJECT-TYPE    
  INTEGER 1..60000  

hh3cdlswLLC2PortTxqMax 1.3.6.1.4.1.25506.8.37.7.1.1.10
Queue for sending llc2 I-frames.
OBJECT-TYPE    
  INTEGER 20..200  

hh3cdlswTrapControl 1.3.6.1.4.1.25506.8.37.1.20
OBJECT IDENTIFIER    

hh3cdlswTrapCntlState 1.3.6.1.4.1.25506.8.37.1.20.1
It is used to indicate whether the DLSw is permitted to emit traps.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

hh3cdlswTraps 1.3.6.1.4.1.25506.8.37.8
OBJECT IDENTIFIER    

hh3cdlswTrapsV2 1.3.6.1.4.1.25506.8.37.8.0
OBJECT IDENTIFIER    

hh3cdlswTrapTConnPartnerReject 1.3.6.1.4.1.25506.8.37.8.0.1
This trap is sent each time a transport connection is rejected by a partner DLSw during Capabilities Exchanges. The emission of this trap is controlled by hh3cdlswTrapCntlCircuit.
NOTIFICATION-TYPE    

hh3cdlswTrapTConnChangeState 1.3.6.1.4.1.25506.8.37.8.0.2
This trap is sent each time a transport connection changes state. The emission of this trap is controlled by hh3cdlswTrapCntlTConn.
NOTIFICATION-TYPE    

hh3cdlswTrapCircuitChangeState 1.3.6.1.4.1.25506.8.37.8.0.3
This trap is sent each time a circuit change state. The emission of this trap is controlled by hh3cdlswTrapCntlCircuit.
NOTIFICATION-TYPE