HH3C-LswMSTP-MIB

File: HH3C-LswMSTP-MIB.mib (32289 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	BRIDGE-MIB
HH3C-OID-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
Counter32	OBJECT-IDENTITY	NOTIFICATION-TYPE
TEXTUAL-CONVENTION	TruthValue	dot1dStpPortEntry
dot1dStpPort	hh3clswCommon

Defined Types

EnabledStatus
A simple status value for the object.
TEXTUAL-CONVENTION
	INTEGER	enabled(1), disabled(2)

BridgeId
OCTET STRING	Size(8)

Hh3cdot1sFormatStatus
Legacy means that the BPDU format is legacy. Dot1s means that the BPDU format is IEEE 802.1s. Auto means that the format of BPDU sending on the port is determined by the BPDU format of its connective port.
TEXTUAL-CONVENTION
	INTEGER	legacy(1), dot1s(2), auto(3)

Hh3cdot1sVIDAllocationEntry
SEQUENCE
	hh3cdot1sMstVID	Integer32
	hh3cdot1sAdminMstID	Integer32
	hh3cdot1sOperMstID	Integer32

Hh3cdot1sInstanceEntry
SEQUENCE
	hh3cdot1sInstanceID	Integer32
	hh3cdot1sMstiBridgeID	BridgeId
	hh3cdot1sMstiBridgePriority	Integer32
	hh3cdot1sMstiDesignedRoot	BridgeId
	hh3cdot1sMstiRootPathCost	Integer32
	hh3cdot1sMstiRootPort	Integer32
	hh3cdot1sMstiRootType	INTEGER
	hh3cdot1sMstiRemainingHops	Integer32
	hh3cdot1sMstiAdminMappedVlanListLow	OCTET STRING
	hh3cdot1sMstiAdminMappedVlanListHigh	OCTET STRING
	hh3cdot1sMstiOperMappedVlanListLow	OCTET STRING
	hh3cdot1sMstiOperMappedVlanListHigh	OCTET STRING

Hh3cdot1sPortEntry
SEQUENCE
	hh3cdot1sMstiPortIndex	Integer32
	hh3cdot1sMstiState	INTEGER
	hh3cdot1sMstiPortPriority	Integer32
	hh3cdot1sMstiPathCost	Integer32
	hh3cdot1sMstiDesignatedRoot	BridgeId
	hh3cdot1sMstiDesignatedCost	Integer32
	hh3cdot1sMstiDesignatedBridge	BridgeId
	hh3cdot1sMstiDesignatedPort	OCTET STRING
	hh3cdot1sMstiMasterBridgeID	BridgeId
	hh3cdot1sMstiMasterPortCost	Integer32
	hh3cdot1sMstiStpPortEdgeport	EnabledStatus
	hh3cdot1sMstiStpPortPointToPoint	INTEGER
	hh3cdot1sMstiStpMcheck	INTEGER
	hh3cdot1sMstiStpTransLimit	Integer32
	hh3cdot1sMstiStpRXStpBPDU	Counter32
	hh3cdot1sMstiStpTXStpBPDU	Counter32
	hh3cdot1sMstiStpRXTCNBPDU	Counter32
	hh3cdot1sMstiStpTXTCNBPDU	Counter32
	hh3cdot1sMstiStpRXRSTPBPDU	Counter32
	hh3cdot1sMstiStpTXRSTPBPDU	Counter32
	hh3cdot1sMstiStpRXMSTPBPDU	Counter32
	hh3cdot1sMstiStpTXMSTPBPDU	Counter32
	hh3cdot1sMstiStpClearStatistics	INTEGER
	hh3cdot1sMstiStpDefaultPortCost	INTEGER
	hh3cdot1sMstiStpStatus	EnabledStatus
	hh3cdot1sMstiPortRootGuard	EnabledStatus
	hh3cdot1sMstiPortLoopGuard	EnabledStatus
	hh3cdot1sMstiStpPortSendingBPDUType	INTEGER
	hh3cdot1sMstiStpOperPortPointToPoint	INTEGER
	hh3cdot1sMstiStpPortAdminBPDUFmt	Hh3cdot1sFormatStatus
	hh3cdot1sMstiStpPortOperBPDUFmt	Hh3cdot1sFormatStatus
	hh3cdot1sMstiStpPortRoleRestriction	EnabledStatus
	hh3cdot1sMstiStpPortTcRestriction	EnabledStatus
	hh3cdot1sMstiStpPortDisputed	TruthValue

Defined Values

hh3cdot1sMstp		1.3.6.1.4.1.25506.8.35.14
This MIB defines objects for managing MSTP.
MODULE-IDENTITY

hh3cdot1sStpStatus		1.3.6.1.4.1.25506.8.35.14.1
Whether the Bridge MSTP is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hh3cdot1sStpForceVersion		1.3.6.1.4.1.25506.8.35.14.2
The mode of this Bridge spanning-tree protocol.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	stp(0), rstp(2), mstp(3)

hh3cdot1sStpDiameter		1.3.6.1.4.1.25506.8.35.14.3
The diameter of Bridge.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..7

hh3cdot1sMstBridgeMaxHops		1.3.6.1.4.1.25506.8.35.14.4
The maximum value of the Bridge hops.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..40

hh3cdot1sMstMasterBridgeID		1.3.6.1.4.1.25506.8.35.14.5
The Bridge Identifier of the current Master Bridge.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hh3cdot1sMstMasterPathCost		1.3.6.1.4.1.25506.8.35.14.6
The CIST path cost from the transmitting Bridge to the Master Bridge.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cdot1sMstBpduGuard		1.3.6.1.4.1.25506.8.35.14.7
Whether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as portfast.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hh3cdot1sMstAdminFormatSelector		1.3.6.1.4.1.25506.8.35.14.8
The administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

hh3cdot1sMstAdminRegionName		1.3.6.1.4.1.25506.8.35.14.9
This MSTP administrative region name.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

hh3cdot1sMstAdminRevisionLevel		1.3.6.1.4.1.25506.8.35.14.10
This MSTP administrative revision level.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

hh3cdot1sMstOperFormatSelector		1.3.6.1.4.1.25506.8.35.14.11
The operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cdot1sMstOperRegionName		1.3.6.1.4.1.25506.8.35.14.12
This MSTP operative region name.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..32)

hh3cdot1sMstOperRevisionLevel		1.3.6.1.4.1.25506.8.35.14.13
This MSTP operative revision level.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hh3cdot1sMstOperConfigDigest		1.3.6.1.4.1.25506.8.35.14.14
This MSTP Region's Configuration Digest Signature Key.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..16)

hh3cdot1sMstRegionConfActive		1.3.6.1.4.1.25506.8.35.14.15
Active the region configuration.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

hh3cdot1sMstDefaultVlanAllo		1.3.6.1.4.1.25506.8.35.14.16
Set default configuration about VLAN allocation and all VLANs are mapped to CIST.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), unused(65535)

hh3cdot1sMstDefaultRegionName		1.3.6.1.4.1.25506.8.35.14.17
Set default region name.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), unused(65535)

hh3cdot1sVIDAllocationTable		1.3.6.1.4.1.25506.8.35.14.18
MSTP VLAN-to-instance mapping table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cdot1sVIDAllocationEntry

hh3cdot1sVIDAllocationEntry		1.3.6.1.4.1.25506.8.35.14.18.1
MSTP VLAN-to-instance mapping table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cdot1sVIDAllocationEntry

hh3cdot1sMstVID		1.3.6.1.4.1.25506.8.35.14.18.1.1
VLAN Identifier
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..4094

hh3cdot1sAdminMstID		1.3.6.1.4.1.25506.8.35.14.18.1.2
Administrative Multiple spanning-tree instance Identifier.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..4094

hh3cdot1sOperMstID		1.3.6.1.4.1.25506.8.35.14.18.1.3
Operative Multiple spanning-tree instance Identifier.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..4094

hh3cdot1sInstanceTable		1.3.6.1.4.1.25506.8.35.14.19
MSTI table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cdot1sInstanceEntry

hh3cdot1sInstanceEntry		1.3.6.1.4.1.25506.8.35.14.19.1
MSTI table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cdot1sInstanceEntry

hh3cdot1sInstanceID		1.3.6.1.4.1.25506.8.35.14.19.1.1
Multiple spanning-tree instance Identifier
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..4094

hh3cdot1sMstiBridgeID		1.3.6.1.4.1.25506.8.35.14.19.1.2
The Bridge Identifier for the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hh3cdot1sMstiBridgePriority		1.3.6.1.4.1.25506.8.35.14.19.1.3
The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..61440

hh3cdot1sMstiDesignedRoot		1.3.6.1.4.1.25506.8.35.14.19.1.4
The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hh3cdot1sMstiRootPathCost		1.3.6.1.4.1.25506.8.35.14.19.1.5
The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cdot1sMstiRootPort		1.3.6.1.4.1.25506.8.35.14.19.1.6
The Root Port for the spanning tree instance identified by the MSTID
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cdot1sMstiRootType		1.3.6.1.4.1.25506.8.35.14.19.1.7
Config this Bridge as a primary root or secondary root and or cancel the root for this spanning tree instance identified by MSTID
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(0), secondary(1), primary(2)

hh3cdot1sMstiRemainingHops		1.3.6.1.4.1.25506.8.35.14.19.1.8
The remaining hops of the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cdot1sMstiAdminMappedVlanListLow		1.3.6.1.4.1.25506.8.35.14.19.1.9
The lower part of administrative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cdot1sMstiAdminMappedVlanListHigh		1.3.6.1.4.1.25506.8.35.14.19.1.10
The higher part of administrative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cdot1sMstiOperMappedVlanListLow		1.3.6.1.4.1.25506.8.35.14.19.1.11
The lower part of operative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cdot1sMstiOperMappedVlanListHigh		1.3.6.1.4.1.25506.8.35.14.19.1.12
The higher part of operative Vlan list mapped to the spanning tree instance identified by MSTID
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..256)

hh3cdot1sPortTable		1.3.6.1.4.1.25506.8.35.14.20
MSTP interface table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hh3cdot1sPortEntry

hh3cdot1sPortEntry		1.3.6.1.4.1.25506.8.35.14.20.1
MSTP interface table entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Hh3cdot1sPortEntry

hh3cdot1sMstiPortIndex		1.3.6.1.4.1.25506.8.35.14.20.1.1
The index of the Bridge Port
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

hh3cdot1sMstiState		1.3.6.1.4.1.25506.8.35.14.20.1.2
The current state of the Port (i.e., Disabled, Discarding , Learning, Forwarding)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(1), discarding(2), learning(4), forwarding(5)

hh3cdot1sMstiPortPriority		1.3.6.1.4.1.25506.8.35.14.20.1.3
The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mstiPortIndex. And step of 16
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..240

hh3cdot1sMstiPathCost		1.3.6.1.4.1.25506.8.35.14.20.1.4
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..200000000

hh3cdot1sMstiDesignatedRoot		1.3.6.1.4.1.25506.8.35.14.20.1.5
The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hh3cdot1sMstiDesignatedCost		1.3.6.1.4.1.25506.8.35.14.20.1.6
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cdot1sMstiDesignatedBridge		1.3.6.1.4.1.25506.8.35.14.20.1.7
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hh3cdot1sMstiDesignatedPort		1.3.6.1.4.1.25506.8.35.14.20.1.8
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

hh3cdot1sMstiMasterBridgeID		1.3.6.1.4.1.25506.8.35.14.20.1.9
The Bridge Identifier of the current Master Bridge. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

hh3cdot1sMstiMasterPortCost		1.3.6.1.4.1.25506.8.35.14.20.1.10
The CIST path cost from the transmitting Bridge to the Master Bridge. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

hh3cdot1sMstiStpPortEdgeport		1.3.6.1.4.1.25506.8.35.14.20.1.11
Whether the port fast is enabled. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hh3cdot1sMstiStpPortPointToPoint		1.3.6.1.4.1.25506.8.35.14.20.1.12
Whether the port connects the point to point link. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	forceTrue(1), forceFalse(2), auto(3)

hh3cdot1sMstiStpMcheck		1.3.6.1.4.1.25506.8.35.14.20.1.13
Forcing the state machine to send MST BPDUs in this manner can be used to test whether all legacy Bridges on a given LAN have been removed. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), unused(65535)

hh3cdot1sMstiStpTransLimit		1.3.6.1.4.1.25506.8.35.14.20.1.14
The value used by the Port Transmit state machine to limit the maximum transmission rate. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..255

hh3cdot1sMstiStpRXStpBPDU		1.3.6.1.4.1.25506.8.35.14.20.1.15
The number of received Config BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cdot1sMstiStpTXStpBPDU		1.3.6.1.4.1.25506.8.35.14.20.1.16
The number of transmitted Config BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cdot1sMstiStpRXTCNBPDU		1.3.6.1.4.1.25506.8.35.14.20.1.17
The number of received TCN BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cdot1sMstiStpTXTCNBPDU		1.3.6.1.4.1.25506.8.35.14.20.1.18
The number of transmitted TCN BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cdot1sMstiStpRXRSTPBPDU		1.3.6.1.4.1.25506.8.35.14.20.1.19
The number of received RST BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cdot1sMstiStpTXRSTPBPDU		1.3.6.1.4.1.25506.8.35.14.20.1.20
The number of transmitted RST BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cdot1sMstiStpRXMSTPBPDU		1.3.6.1.4.1.25506.8.35.14.20.1.21
The number of received MST BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cdot1sMstiStpTXMSTPBPDU		1.3.6.1.4.1.25506.8.35.14.20.1.22
The number of transmitted MST BPDU. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

hh3cdot1sMstiStpClearStatistics		1.3.6.1.4.1.25506.8.35.14.20.1.23
Clear the spanning tree statistic. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	clear(1), unused(65535)

hh3cdot1sMstiStpDefaultPortCost		1.3.6.1.4.1.25506.8.35.14.20.1.24
Set default Port path cost.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), unused(65535)

hh3cdot1sMstiStpStatus		1.3.6.1.4.1.25506.8.35.14.20.1.25
Whether the spanning tree protocol is enabled on this port. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hh3cdot1sMstiPortRootGuard		1.3.6.1.4.1.25506.8.35.14.20.1.26
Whether the root guard is enabled. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hh3cdot1sMstiPortLoopGuard		1.3.6.1.4.1.25506.8.35.14.20.1.27
Whether the loop protection is enabled. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hh3cdot1sMstiStpPortSendingBPDUType		1.3.6.1.4.1.25506.8.35.14.20.1.28
Type of BPDU which the port is sending.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stp(1), rstp(2), mstp(3)

hh3cdot1sMstiStpOperPortPointToPoint		1.3.6.1.4.1.25506.8.35.14.20.1.29
This object indicates whether the port has connected to a point-to-point link or not. The value of the node is an operative value. The administrative value can be read from the node hh3cdot1sMstiStpPortPointToPoint. If the value of hh3cdot1sMstiStpPortPointToPoint is auto, the value of this node should be calculated by the network topology of this port. If the value of hh3cdot1sMstiStpPortPointToPoint is forceFalse, the value of this node is false. If the value of hh3cdot1sMstiStpPortPointToPoint is forceTrue, the value of this node is true.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

hh3cdot1sMstiStpPortAdminBPDUFmt		1.3.6.1.4.1.25506.8.35.14.20.1.30
The value of the node is an administrative value. Value legacy means that the MST BPDU format is forced to legacy. Value dot1s means that the MST BPDU format is forced to IEEE 802.1s. Value auto means that the format of MST BPDU sending on the port is determined by the MST BPDU that the port has received. Effective in CIST.
Status: current	Access: read-write
OBJECT-TYPE
	Hh3cdot1sFormatStatus

hh3cdot1sMstiStpPortOperBPDUFmt		1.3.6.1.4.1.25506.8.35.14.20.1.31
The format of MST BPDU which the port is sending. Value legacy means that the format of MST BPDU sending on the port is legacy. Value dot1s means that the format of MST BPDU sending on the port is IEEE 802.1s. Effective in CIST.
Status: current	Access: read-only
OBJECT-TYPE
	Hh3cdot1sFormatStatus

hh3cdot1sMstiStpPortRoleRestriction		1.3.6.1.4.1.25506.8.35.14.20.1.32
Whether the role-restriction is enabled. Effective in CIST. The role-restriction causes the port not to be selected as root port for the CIST or any MSTI.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hh3cdot1sMstiStpPortTcRestriction		1.3.6.1.4.1.25506.8.35.14.20.1.33
Whether the tc-restriction is enabled. Effective in CIST. The tc-restriction causes the port not to propagate topology changes to other ports.
Status: current	Access: read-write
OBJECT-TYPE
	EnabledStatus

hh3cdot1sMstiStpPortDisputed		1.3.6.1.4.1.25506.8.35.14.20.1.34
Whether the port is disputed for the CIST or MSTI.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

hh3cdot1sStpPathCostStandard		1.3.6.1.4.1.25506.8.35.14.21
Path cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy standard.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	legacy(0), dot1d-1998(1), dot1t(2)

hh3cMstpEventsV2		1.3.6.1.4.1.25506.8.35.14.0
Definition point for Mstp notifications.
Status: current	Access: read-write
OBJECT-IDENTITY

hh3cPortMstiStateForwarding		1.3.6.1.4.1.25506.8.35.14.0.1
The SNMP trap that is generated when a port turns into forwarding state form other state.
Status: current	Access: read-write
NOTIFICATION-TYPE

hh3cPortMstiStateDiscarding		1.3.6.1.4.1.25506.8.35.14.0.2
The SNMP trap that is generated when a port turns into discarding state form forwarding state.
Status: current	Access: read-write
NOTIFICATION-TYPE

hh3cBridgeLostRootPrimary		1.3.6.1.4.1.25506.8.35.14.0.3
The SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance.
Status: current	Access: read-write
NOTIFICATION-TYPE

hh3cPortMstiRootGuarded		1.3.6.1.4.1.25506.8.35.14.0.4
The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance.
Status: current	Access: read-write
NOTIFICATION-TYPE

hh3cPortMstiBpduGuarded		1.3.6.1.4.1.25506.8.35.14.0.5
The SNMP trap is generated when an edged port of the BPDU-guard device receives a BPDU. If the designated bridge ID can't be obtained from the BPDU, the designated bridge ID will be zero.
Status: current	Access: read-write
NOTIFICATION-TYPE

hh3cPortMstiLoopGuarded		1.3.6.1.4.1.25506.8.35.14.0.6
The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out.
Status: current	Access: read-write
NOTIFICATION-TYPE

hh3cMstiNewRoot		1.3.6.1.4.1.25506.8.35.14.0.7
The SNMP trap is generated when the sending device becomes the new root of the spanning tree. The first root bridge ID means the old root bridge ID, and the second one means the new root bridge ID.
Status: current	Access: read-write
NOTIFICATION-TYPE

hh3cPortPvstBpduProtection		1.3.6.1.4.1.25506.8.35.14.0.8
The SNMP trap is generated when a PVST BPDU is received on an MSTP port that is enabled with the PVST protection feature. If the designated bridge ID can't be obtained from the BPDU, the designated bridge ID will be zero.
Status: current	Access: read-write
NOTIFICATION-TYPE