HH3C-HGMP-MIB

File: HH3C-HGMP-MIB.mib (59877 bytes)

Imported modules

HH3C-OID-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

hh3cRhw IpAddress Integer32
OBJECT-TYPE MODULE-IDENTITY OBJECT-IDENTITY
NOTIFICATION-TYPE Counter32 Unsigned32
RowStatus MacAddress TEXTUAL-CONVENTION
DisplayString

Defined Types

Hh3cHgmpGrpMemberEntry  
SEQUENCE    
  hh3chgmpGrpMemberDeviceId OCTET STRING
  hh3chgmpGrpMemberSerial Integer32
  hh3chgmpGrpMemberIpAddr IpAddress
  hh3chgmpGrpMemberName OCTET STRING
  hh3chgmpGrpMemberPassword OCTET STRING
  hh3chgmpGrpMemberPlatform OCTET STRING
  hh3chgmpGrpMemberStatus INTEGER
  hh3chgmpGrpMemberDisconCount Integer32
  hh3chgmpGrpMemberEnrollTime Integer32
  hh3chgmpGrpMemberOperate RowStatus

Hh3cHgmpMemberResetEntry  
SEQUENCE    
  hh3chgmpMemberResetMAC OCTET STRING
  hh3chgmpMemberEraseflash INTEGER

Hh3cHgmpWhitelistEntry  
SEQUENCE    
  hh3chgmpWhitelistDeviceId OCTET STRING
  hh3chgmpWhitelistSerial Integer32
  hh3chgmpWhitelistRowStatus RowStatus

Hh3cHgmpWhitelistNbEntry  
SEQUENCE    
  hh3chgmpWhitelistNbIndex Integer32
  hh3chgmpWhitelistNbDeviceId OCTET STRING
  hh3chgmpWhitelistPortName OCTET STRING
  hh3chgmpWhitelistNbPortName OCTET STRING

Hh3cHgmpBlacklistEntry  
SEQUENCE    
  hh3chgmpBlacklistDeviceId OCTET STRING
  hh3chgmpBlacklistAccessDeviceId OCTET STRING
  hh3chgmpBlacklistAccessPortName OCTET STRING
  hh3chgmpBlacklistRowStatus RowStatus

Hh3cHgmpMemberPriPortEntry  
SEQUENCE    
  hh3chgmpMemberDevId OCTET STRING
  hh3chgmpMemberPriPortProto Unsigned32
  hh3chgmpMemberPriPortProtoDescr DisplayString
  hh3chgmpMemberPriPortNum Unsigned32

Hh3cHgmpStackMemberEntry  
SEQUENCE    
  hh3chgmpStackMemberDeviceId OCTET STRING
  hh3chgmpStackMemberSerial Integer32
  hh3chgmpStackMemberIpAddr IpAddress
  hh3chgmpStackMemberName OCTET STRING
  hh3chgmpStackMemberPassword OCTET STRING
  hh3chgmpStackMemberPlatform OCTET STRING
  hh3chgmpStackMemberStatus INTEGER
  hh3chgmpStackMemberDisconCount Integer32
  hh3chgmpStackMemberEnrollTime Integer32

Hh3cNDPPortEntry  
SEQUENCE    
  hh3cNDPIfIndex Integer32
  hh3cNDPPortStatus INTEGER

Hh3cNDPPortNbEntry  
SEQUENCE    
  hh3cNDPPortNbDeviceId OCTET STRING
  hh3cNDPPortNbPortName OCTET STRING
  hh3cNDPPortNbDeviceName OCTET STRING
  hh3cNDPPortNbPortMode INTEGER
  hh3cNDPPortNbProductVer OCTET STRING
  hh3cNDPPortNbHardVer OCTET STRING
  hh3cNDPPortNbBootromVer OCTET STRING
  hh3cNDPPortNbSoftVer OCTET STRING
  hh3cNDPPortNbAgingtime Integer32

Hh3cHgmpNTDPInterfaceEntry  
SEQUENCE    
  hh3chgmpNTDPInterfaceIfIndex Integer32
  hh3chgmpNTDPInterfaceEnable INTEGER

Hh3cHgmpNTDPCacheEntry  
SEQUENCE    
  hh3chgmpNTDPCacheHashIndex Integer32
  hh3chgmpNTDPCacheDeviceID OCTET STRING
  hh3chgmpNTDPCacheClusterName OCTET STRING
  hh3chgmpNTDPCacheClusterRole INTEGER
  hh3chgmpNTDPCacheCapabilities INTEGER
  hh3chgmpNTDPCacheVersion OCTET STRING
  hh3chgmpNTDPCachePlatform OCTET STRING
  hh3chgmpNTDPCacheMngVLAN INTEGER
  hh3chgmpNTDPCacheHop INTEGER

Hh3cHgmpNTDPTopEntry  
SEQUENCE    
  hh3chgmpNTDPTopHashIndex Integer32
  hh3chgmpNTDPTopEdgeStartDevID OCTET STRING
  hh3chgmpNTDPTopEdgeIndex Integer32
  hh3chgmpNTDPTopEdgeEndDevID OCTET STRING
  hh3chgmpNTDPTopEdgeStartPort OCTET STRING
  hh3chgmpNTDPTopEdgeStartPortFullDuplex INTEGER
  hh3chgmpNTDPTopEdgeStartPortSpeed Integer32
  hh3chgmpNTDPTopEdgeEndPort OCTET STRING
  hh3chgmpNTDPTopLinkStatus INTEGER

Defined Values

hh3cHgmp 1.3.6.1.4.1.25506.8.7
This MIB contains objects to manage the hh3chgmp operations, which are used on lanswitch products.
MODULE-IDENTITY    

hh3cClusterObject 1.3.6.1.4.1.25506.8.7.1
This MIB contains objects to manage the cluster operations, which are used on lanswitch products.
Status: current Access: read-only
OBJECT-IDENTITY    

hh3chgmpSetVLANSecurity 1.3.6.1.4.1.25506.8.7.1.1
Configure whether to perform the VLAN check inside the cluster.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noSecurity(0), security(1)  

hh3chgmpHandShakeInterval 1.3.6.1.4.1.25506.8.7.1.2
Handshaking interval of the cluster member switches.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hh3chgmpHandShakeHoldtime 1.3.6.1.4.1.25506.8.7.1.3
Holdtime of administrator switch and member switch in the cluster.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

hh3chgmpGrpMemberTableChange 1.3.6.1.4.1.25506.8.7.1.4
Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hh3chgmpMemberDisconRate 1.3.6.1.4.1.25506.8.7.1.5
Disconnection times of the member and administrator switches divided by member number times 1000.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpCmdLanswitchFlag 1.3.6.1.4.1.25506.8.7.1.6
Administrator switch flag
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hh3chgmpCmdClusterName 1.3.6.1.4.1.25506.8.7.1.7
Cluster name of the administrator switch
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

hh3chgmpMngPriIpSegCMIP 1.3.6.1.4.1.25506.8.7.1.8
The private management IP address of the administrator switch, which can not be modified after the cluster has been created.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3chgmpMngPriIpMask 1.3.6.1.4.1.25506.8.7.1.9
The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3chgmpFtpServer 1.3.6.1.4.1.25506.8.7.1.10
The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3chgmpTftpServer 1.3.6.1.4.1.25506.8.7.1.11
The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3chgmpSnmpHost 1.3.6.1.4.1.25506.8.7.1.12
The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3chgmpLogHost 1.3.6.1.4.1.25506.8.7.1.13
Log host of the cluster, which can only be configured and accessed on the administrator switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3chgmpGrpMemberTable 1.3.6.1.4.1.25506.8.7.1.14
Table of cluster member switches
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpGrpMemberEntry

hh3chgmpGrpMemberEntry 1.3.6.1.4.1.25506.8.7.1.14.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpGrpMemberEntry  

hh3chgmpGrpMemberDeviceId 1.3.6.1.4.1.25506.8.7.1.14.1.1
4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hh3chgmpGrpMemberSerial 1.3.6.1.4.1.25506.8.7.1.14.1.2
When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2047  

hh3chgmpGrpMemberIpAddr 1.3.6.1.4.1.25506.8.7.1.14.1.3
The private IP addresses of the member switches for the communication inside the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hh3chgmpGrpMemberName 1.3.6.1.4.1.25506.8.7.1.14.1.4
Hostname of the member switch
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

hh3chgmpGrpMemberPassword 1.3.6.1.4.1.25506.8.7.1.14.1.5
Member password for joining a cluster
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hh3chgmpGrpMemberPlatform 1.3.6.1.4.1.25506.8.7.1.14.1.6
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3chgmpGrpMemberStatus 1.3.6.1.4.1.25506.8.7.1.14.1.7
Member status on the administrator switch, use for displaying the network management status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), fault(1)  

hh3chgmpGrpMemberDisconCount 1.3.6.1.4.1.25506.8.7.1.14.1.8
Count of inside communication disconnection between the member switch and the administrator switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpGrpMemberEnrollTime 1.3.6.1.4.1.25506.8.7.1.14.1.9
Enrollment time of the member, measured in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpGrpMemberOperate 1.3.6.1.4.1.25506.8.7.1.14.1.10
Operation indication field, indicates the operation of adding/removing a member by the network management agent.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

hh3chgmpMemberResetTable 1.3.6.1.4.1.25506.8.7.1.15
Reset a member switch in the cluster.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpMemberResetEntry

hh3chgmpMemberResetEntry 1.3.6.1.4.1.25506.8.7.1.15.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpMemberResetEntry  

hh3chgmpMemberResetMAC 1.3.6.1.4.1.25506.8.7.1.15.1.1
The management MAC address of the switch to be reset, which is the unique identifier of the switch.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

hh3chgmpMemberEraseflash 1.3.6.1.4.1.25506.8.7.1.15.1.2
Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noErase(0), erase(1), cannotget(65535)  

hh3chgmpEventsV2 1.3.6.1.4.1.25506.8.7.1.0
Definition point for cluster notifications.
Status: current Access: read-write
OBJECT-IDENTITY    

hh3chgmpMemberfailure 1.3.6.1.4.1.25506.8.7.1.0.1
When a cluster member failure, send a snmp trap to the network management.
Status: current Access: read-write
NOTIFICATION-TYPE    

hh3chgmpMemberRecover 1.3.6.1.4.1.25506.8.7.1.0.2
When a cluster member recover, send a snmp trap to the network management.
Status: current Access: read-write
NOTIFICATION-TYPE    

hh3chgmpMemberStatusChange 1.3.6.1.4.1.25506.8.7.1.0.3
When a cluster member status change, send a snmp trap to the network management.
Status: current Access: read-write
NOTIFICATION-TYPE    

hh3chgmpNetTopChange 1.3.6.1.4.1.25506.8.7.1.0.4
When net topology of this cluster change, send a snmp trap to the network management.
Status: current Access: read-write
NOTIFICATION-TYPE    

hh3chgmpClusterRole 1.3.6.1.4.1.25506.8.7.1.16
This switch's role in cluster.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER roleCMDSW(1), roleMEMBERSW(2), roleBAKSW(3), roleCASW(16), roleUNISW(17)  

hh3chgmpClusterMaxPoolNum 1.3.6.1.4.1.25506.8.7.1.17
Max switch members that the cluster can support(include administrator switch).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hh3chgmpClusterCmdSwMac 1.3.6.1.4.1.25506.8.7.1.18
The MAC address of administrator switch. It will be filled with zero when not be a member of cluster.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

hh3chgmpRun 1.3.6.1.4.1.25506.8.7.1.19
Enable cluster on this switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hh3chgmpProtocolMac 1.3.6.1.4.1.25506.8.7.1.22
OBJECT IDENTIFIER    

hh3chgmpClusterProtocolMac 1.3.6.1.4.1.25506.8.7.1.22.1
Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hh3chgmpTopologyManagement 1.3.6.1.4.1.25506.8.7.1.23
OBJECT IDENTIFIER    

hh3chgmpWhitelistTable 1.3.6.1.4.1.25506.8.7.1.23.1
Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpWhitelistEntry

hh3chgmpWhitelistEntry 1.3.6.1.4.1.25506.8.7.1.23.1.1
Entry items
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpWhitelistEntry  

hh3chgmpWhitelistDeviceId 1.3.6.1.4.1.25506.8.7.1.23.1.1.1
Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(10)  

hh3chgmpWhitelistSerial 1.3.6.1.4.1.25506.8.7.1.23.1.1.2
When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2047 | 65535  

hh3chgmpWhitelistRowStatus 1.3.6.1.4.1.25506.8.7.1.23.1.1.3
The row status of this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3chgmpWhitelistNbTable 1.3.6.1.4.1.25506.8.7.1.23.2
Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpWhitelistNbEntry

hh3chgmpWhitelistNbEntry 1.3.6.1.4.1.25506.8.7.1.23.2.1
Entry items
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpWhitelistNbEntry  

hh3chgmpWhitelistNbIndex 1.3.6.1.4.1.25506.8.7.1.23.2.1.1
Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

hh3chgmpWhitelistNbDeviceId 1.3.6.1.4.1.25506.8.7.1.23.2.1.2
Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(10)  

hh3chgmpWhitelistPortName 1.3.6.1.4.1.25506.8.7.1.23.2.1.3
The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hh3chgmpWhitelistNbPortName 1.3.6.1.4.1.25506.8.7.1.23.2.1.4
The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hh3chgmpBlacklistTable 1.3.6.1.4.1.25506.8.7.1.23.3
Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpBlacklistEntry

hh3chgmpBlacklistEntry 1.3.6.1.4.1.25506.8.7.1.23.3.1
Entry items
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpBlacklistEntry  

hh3chgmpBlacklistDeviceId 1.3.6.1.4.1.25506.8.7.1.23.3.1.1
Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(10)  

hh3chgmpBlacklistAccessDeviceId 1.3.6.1.4.1.25506.8.7.1.23.3.1.2
Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(10)  

hh3chgmpBlacklistAccessPortName 1.3.6.1.4.1.25506.8.7.1.23.3.1.3
The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hh3chgmpBlacklistRowStatus 1.3.6.1.4.1.25506.8.7.1.23.3.1.4
The row status of this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3chgmpMemberPriPortTable 1.3.6.1.4.1.25506.8.7.1.24
This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpMemberPriPortEntry

hh3chgmpMemberPriPortEntry 1.3.6.1.4.1.25506.8.7.1.24.1
Information about a specified member private port entry. The indexes of the entry are hh3chgmpGrpMemberDevId and hh3chgmpMemberPriPortProto, which indicate entries in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpMemberPriPortEntry  

hh3chgmpMemberDevId 1.3.6.1.4.1.25506.8.7.1.24.1.1
Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hh3chgmpMemberPriPortProto 1.3.6.1.4.1.25506.8.7.1.24.1.2
The index of this table. Each instance value of this object corresponds to a different protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hh3chgmpMemberPriPortProtoDescr 1.3.6.1.4.1.25506.8.7.1.24.1.3
It describes the hh3chgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hh3chgmpMemberPriPortProtocol value is 1.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hh3chgmpMemberPriPortNum 1.3.6.1.4.1.25506.8.7.1.24.1.4
The private port number of member switch, used by specified hh3chgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hh3chgmpGrpMemberIpAddr.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cStackObject 1.3.6.1.4.1.25506.8.7.2
This MIB contains objects to manage the stack operations, which is used on lanswitch products.
Status: current Access: read-only
OBJECT-IDENTITY    

hh3chgmpStackMemberTableChange 1.3.6.1.4.1.25506.8.7.2.1
Change identifier of the stack member table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hh3chgmpStackMemberDisconRate 1.3.6.1.4.1.25506.8.7.2.2
Disconnection rate of the stack member switches.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpMainLanswitchFlag 1.3.6.1.4.1.25506.8.7.2.3
The status of the local switch in the stack.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hh3chgmpStackIpPoolStartIP 1.3.6.1.4.1.25506.8.7.2.4
The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3chgmpStackIpPoolLength 1.3.6.1.4.1.25506.8.7.2.5
The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..200  

hh3chgmpStackIpPoolMask 1.3.6.1.4.1.25506.8.7.2.10
The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3chgmpStackMemberTable 1.3.6.1.4.1.25506.8.7.2.6
Stack member table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpStackMemberEntry

hh3chgmpStackMemberEntry 1.3.6.1.4.1.25506.8.7.2.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpStackMemberEntry  

hh3chgmpStackMemberDeviceId 1.3.6.1.4.1.25506.8.7.2.6.1.1
2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hh3chgmpStackMemberSerial 1.3.6.1.4.1.25506.8.7.2.6.1.2
When adding a member switch to the stack, the master switch will assign an unique integer to identify it.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2047  

hh3chgmpStackMemberIpAddr 1.3.6.1.4.1.25506.8.7.2.6.1.3
The private member IP address for the communication inside the stack.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hh3chgmpStackMemberName 1.3.6.1.4.1.25506.8.7.2.6.1.4
Hostname of the member switch.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3chgmpStackMemberPassword 1.3.6.1.4.1.25506.8.7.2.6.1.5
Member password for joining a stack.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3chgmpStackMemberPlatform 1.3.6.1.4.1.25506.8.7.2.6.1.6
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3chgmpStackMemberStatus 1.3.6.1.4.1.25506.8.7.2.6.1.7
Member status on the master switch, use for displaying the network management status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), fault(1)  

hh3chgmpStackMemberDisconCount 1.3.6.1.4.1.25506.8.7.2.6.1.8
Count of inside communication disconnection between the member switch and the master switch.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpStackMemberEnrollTime 1.3.6.1.4.1.25506.8.7.2.6.1.9
Enrollment time of the member, measured in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpStackRole 1.3.6.1.4.1.25506.8.7.2.7
This switch's role status in stack.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER roleCMDSW(1), roleMEMBERSW(2), roleBAKSW(3), roleCASW(16), roleUNISW(17)  

hh3chgmpStackMaxPoolNum 1.3.6.1.4.1.25506.8.7.2.8
Max switch members in one stack that the switch support (include main switch).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hh3chgmpStackMainSwMac 1.3.6.1.4.1.25506.8.7.2.9
The MAC address of main switch. It will be 00.00.00 when not be a member of stack.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..6)  

hh3cNDPObject 1.3.6.1.4.1.25506.8.7.5
This MIB contains objects to manage the ndp operations, which are used on lanswitch products.
Status: current Access: read-only
OBJECT-IDENTITY    

hh3cNDPStatus 1.3.6.1.4.1.25506.8.7.5.1
NDP protocol module enable flag
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

hh3cNDPHelloTimer 1.3.6.1.4.1.25506.8.7.5.2
NDP packet transmission interval, measured in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..254  

hh3cNDPAgingTime 1.3.6.1.4.1.25506.8.7.5.3
How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..255  

hh3cNDPChange 1.3.6.1.4.1.25506.8.7.5.4
Change identifier of the Neighbor table
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cNDPPortTable 1.3.6.1.4.1.25506.8.7.5.5
Configure to enable/disable the interface NDP of the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cNDPPortEntry

hh3cNDPPortEntry 1.3.6.1.4.1.25506.8.7.5.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cNDPPortEntry  

hh3cNDPIfIndex 1.3.6.1.4.1.25506.8.7.5.5.1.1
Unique identifier of an interface of the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cNDPPortStatus 1.3.6.1.4.1.25506.8.7.5.5.1.2
If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

hh3cNDPPortNbTable 1.3.6.1.4.1.25506.8.7.5.6
NDP neighbor information on the switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cNDPPortNbEntry

hh3cNDPPortNbEntry 1.3.6.1.4.1.25506.8.7.5.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cNDPPortNbEntry  

hh3cNDPPortNbDeviceId 1.3.6.1.4.1.25506.8.7.5.6.1.1
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hh3cNDPPortNbPortName 1.3.6.1.4.1.25506.8.7.5.6.1.2
Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hh3cNDPPortNbDeviceName 1.3.6.1.4.1.25506.8.7.5.6.1.3
Device name. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cNDPPortNbPortMode 1.3.6.1.4.1.25506.8.7.5.6.1.4
The neighbor port duplex mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full(1), half(2), auto(3)  

hh3cNDPPortNbProductVer 1.3.6.1.4.1.25506.8.7.5.6.1.5
Product version. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cNDPPortNbHardVer 1.3.6.1.4.1.25506.8.7.5.6.1.6
Hardware version. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cNDPPortNbBootromVer 1.3.6.1.4.1.25506.8.7.5.6.1.7
Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cNDPPortNbSoftVer 1.3.6.1.4.1.25506.8.7.5.6.1.8
Software version. A null string indicates that the field was not included in the latest NDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cNDPPortNbAgingtime 1.3.6.1.4.1.25506.8.7.5.6.1.9
How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 5..255  

hh3cNTDPObject 1.3.6.1.4.1.25506.8.7.4
This MIB contains objects to manage the ntdp operations, which are used on lanswitch products.
Status: current Access: read-only
OBJECT-IDENTITY    

hh3chgmpNTDPCollectTopTime 1.3.6.1.4.1.25506.8.7.4.1
Topology collection interval of the administrator switch of the cluster, measured in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

hh3chgmpNTDPHopRange 1.3.6.1.4.1.25506.8.7.4.2
Range of the topology collection of the administrator switch
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

hh3chgmpNTDPRun 1.3.6.1.4.1.25506.8.7.4.3
Enable/Disable the NTDP function on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hh3chgmpNTDPPortDelay 1.3.6.1.4.1.25506.8.7.4.4
Set the delay to forward the topology request via the ports, measured in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

hh3chgmpNTDPHopDelay 1.3.6.1.4.1.25506.8.7.4.5
Set the delay to forward the topology request from every hop, measured in milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..1000  

hh3chgmpNTDPLastTopCollectDuration 1.3.6.1.4.1.25506.8.7.4.6
Duration of the latest overall topology collection, a performance count measured in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpNTDPCacheChange 1.3.6.1.4.1.25506.8.7.4.7
Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hh3chgmpNTDPTOPTableChange 1.3.6.1.4.1.25506.8.7.4.8
Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hh3chgmpNTDPInterfaceTable 1.3.6.1.4.1.25506.8.7.4.9
Enable/Disable the NTDP on the switch port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpNTDPInterfaceEntry

hh3chgmpNTDPInterfaceEntry 1.3.6.1.4.1.25506.8.7.4.9.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpNTDPInterfaceEntry  

hh3chgmpNTDPInterfaceIfIndex 1.3.6.1.4.1.25506.8.7.4.9.1.1
Unique identifier an interface of the device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpNTDPInterfaceEnable 1.3.6.1.4.1.25506.8.7.4.9.1.2
If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER false(0), true(1)  

hh3chgmpNTDPCacheTable 1.3.6.1.4.1.25506.8.7.4.10
Access the information about the switch from the topology table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpNTDPCacheEntry

hh3chgmpNTDPCacheEntry 1.3.6.1.4.1.25506.8.7.4.10.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpNTDPCacheEntry  

hh3chgmpNTDPCacheHashIndex 1.3.6.1.4.1.25506.8.7.4.10.1.1
Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

hh3chgmpNTDPCacheDeviceID 1.3.6.1.4.1.25506.8.7.4.10.1.2
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hh3chgmpNTDPCacheClusterName 1.3.6.1.4.1.25506.8.7.4.10.1.3
Name of the cluster including the device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3chgmpNTDPCacheClusterRole 1.3.6.1.4.1.25506.8.7.4.10.1.4
Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER roleCOSW(1), roleMSW(2), roleBKSW(3), roleCASW(16), roleUNISW(17)  

hh3chgmpNTDPCacheCapabilities 1.3.6.1.4.1.25506.8.7.4.10.1.5
The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hh3chgmpNTDPCacheVersion 1.3.6.1.4.1.25506.8.7.4.10.1.6
The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3chgmpNTDPCachePlatform 1.3.6.1.4.1.25506.8.7.4.10.1.7
Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3chgmpNTDPCacheMngVLAN 1.3.6.1.4.1.25506.8.7.4.10.1.8
The management VLAN ID of the device.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hh3chgmpNTDPCacheHop 1.3.6.1.4.1.25506.8.7.4.10.1.9
Hops to this switch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

hh3chgmpNTDPTopTable 1.3.6.1.4.1.25506.8.7.4.11
Access the topology structure collected by the NTDP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cHgmpNTDPTopEntry

hh3chgmpNTDPTopEntry 1.3.6.1.4.1.25506.8.7.4.11.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cHgmpNTDPTopEntry  

hh3chgmpNTDPTopHashIndex 1.3.6.1.4.1.25506.8.7.4.11.1.1
Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

hh3chgmpNTDPTopEdgeStartDevID 1.3.6.1.4.1.25506.8.7.4.11.1.2
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hh3chgmpNTDPTopEdgeIndex 1.3.6.1.4.1.25506.8.7.4.11.1.3
Edge index of this entry in the data structure.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

hh3chgmpNTDPTopEdgeEndDevID 1.3.6.1.4.1.25506.8.7.4.11.1.4
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..10)  

hh3chgmpNTDPTopEdgeStartPort 1.3.6.1.4.1.25506.8.7.4.11.1.5
The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hh3chgmpNTDPTopEdgeStartPortFullDuplex 1.3.6.1.4.1.25506.8.7.4.11.1.6
The full-duplex status of the first port on a topology edge.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER half(0), full(1)  

hh3chgmpNTDPTopEdgeStartPortSpeed 1.3.6.1.4.1.25506.8.7.4.11.1.7
The speed of the first port on a topology edge.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3chgmpNTDPTopEdgeEndPort 1.3.6.1.4.1.25506.8.7.4.11.1.8
The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..47)  

hh3chgmpNTDPTopLinkStatus 1.3.6.1.4.1.25506.8.7.4.11.1.11
In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER forwarding(1), blocking(2)  

hh3chgmpStackEventsV2 1.3.6.1.4.1.25506.8.7.2.0
Definition point for Stack notifications.
Status: current Access: read-only
OBJECT-IDENTITY    

hh3chgmpStackMemberfailure 1.3.6.1.4.1.25506.8.7.2.0.1
When a stack member failure, send a snmp trap to the network management.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3chgmpStackMemberRecover 1.3.6.1.4.1.25506.8.7.2.0.2
When a stack member Recover, send a snmp trap to the network management.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3chgmpStackMemberStatusChange 1.3.6.1.4.1.25506.8.7.2.0.3
When a stack member status change, send a snmp trap to the network management.
Status: current Access: read-only
NOTIFICATION-TYPE