HH3C-EPON-MIB

File: HH3C-EPON-MIB.mib (167463 bytes)

Imported modules

HH3C-OID-MIB IF-MIB HH3C-LSW-DEV-ADM-MIB
SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB

Imported symbols

hh3cEpon ifIndex ifDescr
hh3cLswFrameIndex hh3cLswSlotIndex Integer32
Unsigned32 Counter64 IpAddress
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
TruthValue MacAddress DateAndTime
RowStatus DisplayString InetAddress
InetAddressType

Defined Types

Hh3cEponSysManEntry  
SEQUENCE    
  hh3cEponSlotIndex Integer32
  hh3cEponModeSwitch INTEGER
  hh3cEponAutomaticMode INTEGER
  hh3cEponOamDiscoveryTimeout Integer32
  hh3cEponEncryptionNoReplyTimeOut Integer32
  hh3cEponEncryptionUpdateTime Integer32
  hh3cEponAutoBindStatus INTEGER

Hh3cEponAutoUpdateEntry  
SEQUENCE    
  hh3cEponAutoUpdateFileName DisplayString
  hh3cEponAutoUpdateSchedStatus INTEGER
  hh3cEponAutoUpdateSchedTime OCTET STRING
  hh3cEponAutoUpdateSchedType INTEGER
  hh3cEponAutoUpdateRealTimeStatus INTEGER

Hh3cEponOuiIndexNextEntry  
SEQUENCE    
  hh3cEponOuiIndexNext Integer32

Hh3cEponOuiEntry  
SEQUENCE    
  hh3cEponOuiIndex Integer32
  hh3cEponOuiValue OCTET STRING
  hh3cEponOamVersion OCTET STRING
  hh3cEponOuiRowStatus RowStatus

Hh3cEponMulticastControlEntry  
SEQUENCE    
  hh3cEponMulticastVlanId Integer32
  hh3cEponMulticastAddressList OCTET STRING
  hh3cEponMulticastStatus RowStatus

Hh3cOltSysManEntry  
SEQUENCE    
  hh3cOltLaserOnTime Integer32
  hh3cOltLaserOffTime Integer32
  hh3cOltMultiCopyBrdCast TruthValue
  hh3cOltEnableDiscardPacket TruthValue
  hh3cOltSelfTest INTEGER
  hh3cOltSelfTestResult INTEGER
  hh3cOltMaxRtt Unsigned32

Hh3cOltInfoEntry  
SEQUENCE    
  hh3cOltFirmMajorVersion OCTET STRING
  hh3cOltFirmMinorVersion OCTET STRING
  hh3cOltHardMajorVersion OCTET STRING
  hh3cOltHardMinorVersion OCTET STRING
  hh3cOltAgcLockTime Integer32
  hh3cOltAgcCdrTime Integer32
  hh3cOltMacAddress MacAddress
  hh3cOltWorkMode INTEGER
  hh3cOltOpticalPowerTx Integer32
  hh3cOltOpticalPowerRx Integer32

Hh3cOltDbaManEntry  
SEQUENCE    
  hh3cOltDbaEnabledType INTEGER
  hh3cOltDbaDiscoveryLength Integer32
  hh3cOltDbaDiscovryFrequency Integer32
  hh3cOltDbaCycleLength Integer32
  hh3cOltDbaVersion OCTET STRING
  hh3cOltDbaUpdate INTEGER
  hh3cOltDbaUpdateResult INTEGER

Hh3cOltPortAlarmThresholdEntry  
SEQUENCE    
  hh3cOltPortAlarmBerEnabled TruthValue
  hh3cOltPortAlarmBerDirect INTEGER
  hh3cOltPortAlarmBerThreshold Integer32
  hh3cOltPortAlarmFerEnabled TruthValue
  hh3cOltPortAlarmFerDirect INTEGER
  hh3cOltPortAlarmFerThreshold Integer32
  hh3cOltPortAlarmLlidMismatchEnabled TruthValue
  hh3cOltPortAlarmLlidMismatchThreshold Integer32
  hh3cOltPortAlarmRemoteStableEnabled TruthValue
  hh3cOltPortAlarmLocalStableEnabled TruthValue
  hh3cOltPortAlarmRegistrationEnabled TruthValue
  hh3cOltPortAlarmOamDisconnectionEnabled TruthValue
  hh3cOltPortAlarmEncryptionKeyEnabled TruthValue
  hh3cOltPortAlarmVendorSpecificEnabled TruthValue
  hh3cOltPortAlarmRegExcessEnabled TruthValue
  hh3cOltPortAlarmDFEEnabled TruthValue

Hh3cOnuSilentEntry  
SEQUENCE    
  hh3cOnuSilentMacAddr MacAddress
  hh3cOnuSilentTime Integer32

Hh3cOltUsingOnuEntry  
SEQUENCE    
  hh3cOltUsingOnuNum Integer32
  hh3cOltUsingOnuIfIndex Integer32
  hh3cOltUsingOnuRowStatus RowStatus

Hh3cOnuSysManEntry  
SEQUENCE    
  hh3cOnuEncryptMan INTEGER
  hh3cOnuReAuthorize INTEGER
  hh3cOnuMulticastFilterStatus TruthValue
  hh3cOnuDbaReportQueueSetNumber Integer32
  hh3cOnuRemoteFecStatus INTEGER
  hh3cOnuPortBerStatus INTEGER
  hh3cOnuReset INTEGER
  hh3cOnuMulticastControlMode INTEGER
  hh3cOnuAccessVlan Integer32
  hh3cOnuEncryptKey DisplayString
  hh3cOnuUniUpDownTrapStatus TruthValue
  hh3cOnuFecStatus INTEGER
  hh3cOnuMcastCtrlHostAgingTime Integer32
  hh3cOnuMulticastFastLeaveEnable TruthValue
  hh3cOnuPortIsolateEnable TruthValue

Hh3cOnuLinkTestEntry  
SEQUENCE    
  hh3cOnuLinkTestFrameNum Integer32
  hh3cOnuLinkTestFrameSize Integer32
  hh3cOnuLinkTestDelay TruthValue
  hh3cOnuLinkTestVlanTag TruthValue
  hh3cOnuLinkTestVlanPriority Integer32
  hh3cOnuLinkTestVlanTagID Integer32
  hh3cOnuLinkTestResultSentFrameNum Integer32
  hh3cOnuLinkTestResultRetFrameNum Integer32
  hh3cOnuLinkTestResultRetErrFrameNum Integer32
  hh3cOnuLinkTestResultMinDelay Integer32
  hh3cOnuLinkTestResultMeanDelay Integer32
  hh3cOnuLinkTestResultMaxDelay Integer32

Hh3cOnuBandWidthEntry  
SEQUENCE    
  hh3cOnuDownStreamBandWidthPolicy TruthValue
  hh3cOnuDownStreamMaxBandWidth Integer32
  hh3cOnuDownStreamMaxBurstSize Integer32
  hh3cOnuDownStreamHighPriorityFirst TruthValue
  hh3cOnuDownStreamShortFrameFirst TruthValue
  hh3cOnuP2PBandWidthPolicy TruthValue
  hh3cOnuP2PMaxBandWidth Integer32
  hh3cOnuP2PMaxBurstSize Integer32
  hh3cOnuP2PHighPriorityFirst TruthValue
  hh3cOnuP2PShortFrameFirst TruthValue

Hh3cOnuSlaManEntry  
SEQUENCE    
  hh3cOnuSlaMaxBandWidth Integer32
  hh3cOnuSlaMinBandWidth Integer32
  hh3cOnuSlaBandWidthStepVal Integer32
  hh3cOnuSlaDelay INTEGER
  hh3cOnuSlaFixedBandWidth Integer32
  hh3cOnuSlaPriorityClass Integer32
  hh3cOnuSlaFixedPacketSize Integer32

Hh3cOnuInfoEntry  
SEQUENCE    
  hh3cOnuHardMajorVersion OCTET STRING
  hh3cOnuHardMinorVersion OCTET STRING
  hh3cOnuSoftwareVersion OCTET STRING
  hh3cOnuUniMacType INTEGER
  hh3cOnuLaserOnTime Integer32
  hh3cOnuLaserOffTime Integer32
  hh3cOnuGrantFifoDep Integer32
  hh3cOnuWorkMode INTEGER
  hh3cOnuPCBVersion OCTET STRING
  hh3cOnuRtt Unsigned32
  hh3cOnuEEPROMVersion OCTET STRING
  hh3cOnuRegType OCTET STRING
  hh3cOnuHostType OCTET STRING
  hh3cOnuDistance Integer32
  hh3cOnuLlid Integer32
  hh3cOnuVendorId OCTET STRING
  hh3cOnuFirmwareVersion OCTET STRING
  hh3cOnuOpticalPowerReceivedByOlt Integer32

Hh3cOnuMacAddrInfoEntry  
SEQUENCE    
  hh3cOnuMacIndex Integer32
  hh3cOnuMacAddrFlag INTEGER
  hh3cOnuMacAddress MacAddress

Hh3cOnuBindMacAddrEntry  
SEQUENCE    
  hh3cOnuBindMacAddress MacAddress
  hh3cOnuBindType Integer32

Hh3cOnuFirmwareUpdateEntry  
SEQUENCE    
  hh3cOnuUpdate INTEGER
  hh3cOnuUpdateResult INTEGER
  hh3cOnuUpdateFileName OCTET STRING

Hh3cEponOnuTypeManEntry  
SEQUENCE    
  hh3cEponOnuTypeIndex Integer32
  hh3cEponOnuTypeDescr OCTET STRING

Hh3cOnuPacketManEntry  
SEQUENCE    
  hh3cOnuPriorityTrust INTEGER
  hh3cOnuQueueScheduler INTEGER

Hh3cOnuProtocolEntry  
SEQUENCE    
  hh3cOnuStpStatus TruthValue
  hh3cOnuIgmpSnoopingStatus TruthValue
  hh3cOnuDhcpsnoopingOption82 TruthValue
  hh3cOnuDhcpsnooping TruthValue
  hh3cOnuPppoe TruthValue
  hh3cOnuIgmpSnoopingHostAgingT Integer32
  hh3cOnuIgmpSnoopingMaxRespT Integer32
  hh3cOnuIgmpSnoopingRouterAgingT Integer32
  hh3cOnuIgmpSnoopingAggReportS TruthValue
  hh3cOnuIgmpSnoopingAggLeaveS TruthValue

Hh3cOnuDot1xEntry  
SEQUENCE    
  hh3cOnuDot1xAccount OCTET STRING
  hh3cOnuDot1xPassword OCTET STRING

Hh3cOnuPriorityQueueEntry  
SEQUENCE    
  hh3cOnuQueueDirection INTEGER
  hh3cOnuQueueId Integer32
  hh3cOnuQueueSize Integer32

Hh3cOnuCountEntry  
SEQUENCE    
  hh3cOnuInCRCErrPkts Counter64
  hh3cOnuOutDroppedFrames Counter64

Hh3cOnuQueueBandwidthEntry  
SEQUENCE    
  hh3cOnuQueueMaxBandwidth Integer32
  hh3cOnuQueueMaxBurstsize Integer32
  hh3cOnuQueuePolicyStatus TruthValue

Hh3cOnuIpAddressEntry  
SEQUENCE    
  hh3cOnuIpAddress IpAddress
  hh3cOnuIpAddressMask IpAddress
  hh3cOnuIpAddressGateway IpAddress
  hh3cOnuDhcpallocate TruthValue
  hh3cOnuManageVID Integer32
  hh3cOnuManageVlanIntfS TruthValue

Hh3cOnuChipSetInfoEntry  
SEQUENCE    
  hh3cOnuChipSetVendorId OCTET STRING
  hh3cOnuChipSetModel OCTET STRING
  hh3cOnuChipSetRevision Integer32
  hh3cOnuChipSetDesignDate DateAndTime

Hh3cOnuCapabilityEntry  
SEQUENCE    
  hh3cOnuServiceSupported BITS
  hh3cOnuGEPortNumber Integer32
  hh3cOnuFEPortNumber Integer32
  hh3cOnuPOTSPortNumber Integer32
  hh3cOnuE1PortsNumber Integer32
  hh3cOnuUpstreamQueueNumber Integer32
  hh3cOnuMaxUpstreamQueuePerPort Integer32
  hh3cOnuDownstreamQueueNumber Integer32
  hh3cOnuMaxDownstreamQueuePerPort Integer32
  hh3cOnuBatteryBackup TruthValue
  hh3cOnuIgspFastLeaveSupported TruthValue
  hh3cOnuMCtrlFastLeaveSupported TruthValue

Hh3cOnuDbaReportEntry  
SEQUENCE    
  hh3cOnuDbaReportQueueId Integer32
  hh3cOnuDbaReportThreshold Integer32
  hh3cOnuDbaReportStatus INTEGER

Hh3cOnuCosToLocalPrecedenceEntry  
SEQUENCE    
  hh3cOnuCosToLocalPrecedenceCosIndex Integer32
  hh3cOnuCosToLocalPrecedenceValue Integer32

Hh3cEponOnuStpPortEntry  
SEQUENCE    
  hh3cEponStpPortIndex Integer32
  hh3cEponStpPortDescr OCTET STRING
  hh3cEponStpPortState INTEGER

Hh3cOnuPhysicalEntry  
SEQUENCE    
  hh3cOnuBridgeMac MacAddress
  hh3cOnuFirstPonMac MacAddress
  hh3cOnuFirstPonRegState INTEGER
  hh3cOnuSecondPonMac MacAddress
  hh3cOnuSecondPonRegState INTEGER

Hh3cOnuSmlkEntry  
SEQUENCE    
  hh3cOnuSmlkGroupID Integer32
  hh3cOnuSmlkFirstPonRole INTEGER
  hh3cOnuSmlkFirstPonStatus INTEGER
  hh3cOnuSmlkSecondPonRole INTEGER
  hh3cOnuSmlkSecondPonStatus INTEGER

Hh3cOnuRS485PropertiesEntry  
SEQUENCE    
  hh3cOnuRS485SerialIndex Integer32
  hh3cOnuRS485BaudRate INTEGER
  hh3cOnuRS485DataBits INTEGER
  hh3cOnuRS485Parity INTEGER
  hh3cOnuRS485StopBits INTEGER
  hh3cOnuRS485FlowControl INTEGER
  hh3cOnuRS485TXOctets Integer32
  hh3cOnuRS485RXOctets Integer32
  hh3cOnuRS485TXErrOctets Integer32
  hh3cOnuRS485RXErrOctets Integer32
  hh3cOnuRS485ResetStatistics INTEGER

Hh3cOnuRS485SessionSummaryEntry  
SEQUENCE    
  hh3cOnuRS485SessionMaxNum Integer32
  hh3cOnuRS485SessionNextIndex Integer32

Hh3cOnuRS485SessionEntry  
SEQUENCE    
  hh3cOnuRS485SessionIndex Integer32
  hh3cOnuRS485SessionType INTEGER
  hh3cOnuRS485SessionAddType InetAddressType
  hh3cOnuRS485SessionRemoteIP InetAddress
  hh3cOnuRS485SessionRemotePort Integer32
  hh3cOnuRS485SessionLocalPort Integer32
  hh3cOnuRS485SessionRowStatus RowStatus

Hh3cOnuRS485SessionErrInfoEntry  
SEQUENCE    
  hh3cOnuRS485SessionErrInfo DisplayString

Hh3cEponBatchOperationBySlotEntry  
SEQUENCE    
  hh3cEponBatchOperationBySlotIndex Integer32
  hh3cEponBatchOperationBySlotType INTEGER
  hh3cEponBatchOperationBySlot INTEGER
  hh3cEponBatchOperationBySlotResult Integer32

Hh3cEponBatchOperationByOLTEntry  
SEQUENCE    
  hh3cEponBatchOperationByOLTType INTEGER
  hh3cEponBatchOperationByOLT INTEGER
  hh3cEponBatchOperationByOLTResult Integer32

Hh3cOnuFirmwareUpdateByTypeEntry  
SEQUENCE    
  hh3cOnuUpdateByOnuTypeIndex Integer32
  hh3cOnuUpdateByTypeOnuType OCTET STRING
  hh3cOnuUpdateByTypeFileName OCTET STRING
  hh3cOnuUpdateByTypeRowStatus RowStatus

Hh3cEponStatEntry  
SEQUENCE    
  hh3cEponStatFER Counter64
  hh3cEponStatBER Counter64

Defined Values

hh3cEponMibObjects 1.3.6.1.4.1.25506.2.42.1
The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
MODULE-IDENTITY    

hh3cEponSysMan 1.3.6.1.4.1.25506.2.42.1.1
OBJECT IDENTIFIER    

hh3cEponAutoAuthorize 1.3.6.1.4.1.25506.2.42.1.1.1
This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cEponMonitorCycle 1.3.6.1.4.1.25506.2.42.1.1.2
The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEponMsgTimeOut 1.3.6.1.4.1.25506.2.42.1.1.3
Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEponMsgLoseNum 1.3.6.1.4.1.25506.2.42.1.1.4
The times of messages sending timeouts, after which OLT will reset (applying to every OLT).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEponSysHasEPONBoard 1.3.6.1.4.1.25506.2.42.1.1.5
true(1) - At least an EPON board exists. false(2) - No EPON board exists.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hh3cEponMonitorCycleEnable 1.3.6.1.4.1.25506.2.42.1.1.6
Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cEponOltSoftwareErrAlmEnable 1.3.6.1.4.1.25506.2.42.1.1.7
Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cEponPortLoopBackAlmEnable 1.3.6.1.4.1.25506.2.42.1.1.8
LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cEponMonitorCycleMinVal 1.3.6.1.4.1.25506.2.42.1.1.9
The lower limit of cycle which be confined to the hh3cEponMonitorCycle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponMonitorCycleMaxVal 1.3.6.1.4.1.25506.2.42.1.1.10
The upper limit of cycle which be confined to the hh3cEponMonitorCycle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponMsgTimeOutMinVal 1.3.6.1.4.1.25506.2.42.1.1.11
The lower limit of timeout which be confined to the hh3cEponMsgTimeOut.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponMsgTimeOutMaxVal 1.3.6.1.4.1.25506.2.42.1.1.12
The upper limit of timeout which be confined to the hh3cEponMsgTimeOut.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponMsgLoseNumMinVal 1.3.6.1.4.1.25506.2.42.1.1.13
The lower limit of time which be confined to the hh3cEponMsgLoseNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponMsgLoseNumMaxVal 1.3.6.1.4.1.25506.2.42.1.1.14
The upper limit of time which be confined to the hh3cEponMsgLoseNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponSysScalarGroup 1.3.6.1.4.1.25506.2.42.1.1.15
OBJECT IDENTIFIER    

hh3cEponSysManTable 1.3.6.1.4.1.25506.2.42.1.1.16
This table defines system related parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponSysManEntry

hh3cEponSysManEntry 1.3.6.1.4.1.25506.2.42.1.1.16.1
The entry of the table hh3cEponSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponSysManEntry  

hh3cEponSlotIndex 1.3.6.1.4.1.25506.2.42.1.1.16.1.1
Slot Index, the index of hh3cEponSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cEponModeSwitch 1.3.6.1.4.1.25506.2.42.1.1.16.1.2
cmode - epon standard mode. hmode - private mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cmode(1), hmode(2)  

hh3cEponAutomaticMode 1.3.6.1.4.1.25506.2.42.1.1.16.1.3
Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cEponOamDiscoveryTimeout 1.3.6.1.4.1.25506.2.42.1.1.16.1.4
Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEponEncryptionNoReplyTimeOut 1.3.6.1.4.1.25506.2.42.1.1.16.1.5
Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEponEncryptionUpdateTime 1.3.6.1.4.1.25506.2.42.1.1.16.1.6
Encryption key update timer for all ONUs on slot, indicated by hh3cEponSlotIndex, ranging from 1 to 255, measured in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEponAutoBindStatus 1.3.6.1.4.1.25506.2.42.1.1.16.1.7
enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cEponAutoUpdateTable 1.3.6.1.4.1.25506.2.42.1.1.17
EPON auto update ONU application configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponAutoUpdateEntry

hh3cEponAutoUpdateEntry 1.3.6.1.4.1.25506.2.42.1.1.17.1
The entry of the table hh3cEponAutoUpdateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponAutoUpdateEntry  

hh3cEponAutoUpdateFileName 1.3.6.1.4.1.25506.2.42.1.1.17.1.1
The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

hh3cEponAutoUpdateSchedStatus 1.3.6.1.4.1.25506.2.42.1.1.17.1.2
The status of schedule update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cEponAutoUpdateSchedTime 1.3.6.1.4.1.25506.2.42.1.1.17.1.3
The schedule update timing configuration is related to the hh3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hh3cEponAutoUpdateSchedStatus is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cEponAutoUpdateSchedType 1.3.6.1.4.1.25506.2.42.1.1.17.1.4
The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER daily(1), weekly(2), comingdate(3)  

hh3cEponAutoUpdateRealTimeStatus 1.3.6.1.4.1.25506.2.42.1.1.17.1.5
The status of real time update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cEponOuiIndexNextTable 1.3.6.1.4.1.25506.2.42.1.1.18
Next OUI index table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponOuiIndexNextEntry

hh3cEponOuiIndexNextEntry 1.3.6.1.4.1.25506.2.42.1.1.18.1
The entry of the table hh3cEponOuiIndexNextTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponOuiIndexNextEntry  

hh3cEponOuiIndexNext 1.3.6.1.4.1.25506.2.42.1.1.18.1.1
This object contains an appropriate value to be used for hh3cEponOuiIndex when creating rows in the hh3cEponOuiTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponOuiTable 1.3.6.1.4.1.25506.2.42.1.1.19
List of OUI and OAM supported by OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponOuiEntry

hh3cEponOuiEntry 1.3.6.1.4.1.25506.2.42.1.1.19.1
The entry of the table hh3cEponOuiTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponOuiEntry  

hh3cEponOuiIndex 1.3.6.1.4.1.25506.2.42.1.1.19.1.1
The index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cEponOuiValue 1.3.6.1.4.1.25506.2.42.1.1.19.1.2
OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

hh3cEponOamVersion 1.3.6.1.4.1.25506.2.42.1.1.19.1.3
Version of OAM protocol defined by the organization denoted by OUI.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cEponOuiRowStatus 1.3.6.1.4.1.25506.2.42.1.1.19.1.4
The status of this table entry. Only active, createAndGo and the destory are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cEponMulticastControlTable 1.3.6.1.4.1.25506.2.42.1.1.20
Multicast control global configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponMulticastControlEntry

hh3cEponMulticastControlEntry 1.3.6.1.4.1.25506.2.42.1.1.20.1
The entry of the table hh3cEponMulticastControlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponMulticastControlEntry  

hh3cEponMulticastVlanId 1.3.6.1.4.1.25506.2.42.1.1.20.1.1
The index of this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cEponMulticastAddressList 1.3.6.1.4.1.25506.2.42.1.1.20.1.2
The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cEponMulticastStatus 1.3.6.1.4.1.25506.2.42.1.1.20.1.3
The status of this table entry. Only active, createAndGo and the destory are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cEponFileName 1.3.6.1.4.1.25506.2.42.1.2
OBJECT IDENTIFIER    

hh3cEponDbaUpdateFileName 1.3.6.1.4.1.25506.2.42.1.2.1
The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hh3cEponOnuUpdateFileName 1.3.6.1.4.1.25506.2.42.1.2.2
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

hh3cEponOltMan 1.3.6.1.4.1.25506.2.42.1.3
OBJECT IDENTIFIER    

hh3cOltSysManTable 1.3.6.1.4.1.25506.2.42.1.3.1
This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOltSysManEntry

hh3cOltSysManEntry 1.3.6.1.4.1.25506.2.42.1.3.1.1
The entry of the table hh3cOltSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOltSysManEntry  

hh3cOltLaserOnTime 1.3.6.1.4.1.25506.2.42.1.3.1.1.1
The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOltLaserOffTime 1.3.6.1.4.1.25506.2.42.1.3.1.1.2
The laser off time of the ONUs during the discovery process, measured in TQ.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOltMultiCopyBrdCast 1.3.6.1.4.1.25506.2.42.1.3.1.1.3
true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltEnableDiscardPacket 1.3.6.1.4.1.25506.2.42.1.3.1.1.4
Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltSelfTest 1.3.6.1.4.1.25506.2.42.1.3.1.1.5
selftest(1): Test OLT to check whether it's OK.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER selftest(1)  

hh3cOltSelfTestResult 1.3.6.1.4.1.25506.2.42.1.3.1.1.6
The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), fail(3)  

hh3cOltMaxRtt 1.3.6.1.4.1.25506.2.42.1.3.1.1.7
Set the max Round Trip Time of this OLT.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hh3cOltInfoTable 1.3.6.1.4.1.25506.2.42.1.3.2
Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hh3cOltFirmMajorVersion, hh3cOltFirmMinorVersion, hh3cOltHardMajorVersion, hh3cOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hh3cOltAgcLockTime, hh3cOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hh3cOltMacAddress, hh3cOltWorkMode)
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOltInfoEntry

hh3cOltInfoEntry 1.3.6.1.4.1.25506.2.42.1.3.2.1
The entry of the table hh3cOltInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOltInfoEntry  

hh3cOltFirmMajorVersion 1.3.6.1.4.1.25506.2.42.1.3.2.1.1
OLT firmware major version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOltFirmMinorVersion 1.3.6.1.4.1.25506.2.42.1.3.2.1.2
OLT firmware minor version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOltHardMajorVersion 1.3.6.1.4.1.25506.2.42.1.3.2.1.3
OLT hardware major version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOltHardMinorVersion 1.3.6.1.4.1.25506.2.42.1.3.2.1.4
OLT hardware minor version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOltAgcLockTime 1.3.6.1.4.1.25506.2.42.1.3.2.1.5
PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltAgcCdrTime 1.3.6.1.4.1.25506.2.42.1.3.2.1.6
PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltMacAddress 1.3.6.1.4.1.25506.2.42.1.3.2.1.7
OLT MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hh3cOltWorkMode 1.3.6.1.4.1.25506.2.42.1.3.2.1.8
The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), open(2), reset(3), closed(4)  

hh3cOltOpticalPowerTx 1.3.6.1.4.1.25506.2.42.1.3.2.1.9
The optical power transmitted by this OLT. It measured in 0.01 dBm unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltOpticalPowerRx 1.3.6.1.4.1.25506.2.42.1.3.2.1.10
The burst optical power received by this OLT. It measured in 0.01 dBm unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltDbaManTable 1.3.6.1.4.1.25506.2.42.1.3.3
This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOltDbaManEntry

hh3cOltDbaManEntry 1.3.6.1.4.1.25506.2.42.1.3.3.1
The entry of the table hh3cOltDbaManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOltDbaManEntry  

hh3cOltDbaEnabledType 1.3.6.1.4.1.25506.2.42.1.3.3.1.1
Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER internal(1), external(2)  

hh3cOltDbaDiscoveryLength 1.3.6.1.4.1.25506.2.42.1.3.3.1.2
Discovery length in TQ units.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOltDbaDiscovryFrequency 1.3.6.1.4.1.25506.2.42.1.3.3.1.3
How often should the OLT send discovery frames to the ONUs, measured in grant cycles.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOltDbaCycleLength 1.3.6.1.4.1.25506.2.42.1.3.3.1.4
The grant cycle length in TQ units.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOltDbaVersion 1.3.6.1.4.1.25506.2.42.1.3.3.1.5
DBA version of the OLT.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOltDbaUpdate 1.3.6.1.4.1.25506.2.42.1.3.3.1.6
Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hh3cEponDbaUpdateFileName.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER update(1)  

hh3cOltDbaUpdateResult 1.3.6.1.4.1.25506.2.42.1.3.3.1.7
The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5)  

hh3cOltPortAlarmThresholdTable 1.3.6.1.4.1.25506.2.42.1.3.4
The table defines the alarm threshold of OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOltPortAlarmThresholdEntry

hh3cOltPortAlarmThresholdEntry 1.3.6.1.4.1.25506.2.42.1.3.4.1
The entry of the table hh3cOltPortAlarmThresholdTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOltPortAlarmThresholdEntry  

hh3cOltPortAlarmBerEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.1
Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmBerDirect 1.3.6.1.4.1.25506.2.42.1.3.4.1.2
Traffic direction to monitor for BER alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER berUplink(1), berDownlink(2), berAll(3)  

hh3cOltPortAlarmBerThreshold 1.3.6.1.4.1.25506.2.42.1.3.4.1.3
BER threshold exceed which the alarm is raised.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmFerEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.4
Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmFerDirect 1.3.6.1.4.1.25506.2.42.1.3.4.1.5
Traffic direction to monitor for FER alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ferUplink(1), ferDownlink(2), ferAll(3)  

hh3cOltPortAlarmFerThreshold 1.3.6.1.4.1.25506.2.42.1.3.4.1.6
Frame error rate exceed threshold then the alarm is raised.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmLlidMismatchEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.7
Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmLlidMismatchThreshold 1.3.6.1.4.1.25506.2.42.1.3.4.1.8
The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmRemoteStableEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.9
Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmLocalStableEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.10
Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmRegistrationEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.11
Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmOamDisconnectionEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.12
Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmEncryptionKeyEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.13
Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmVendorSpecificEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.14
Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmRegExcessEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.15
Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltPortAlarmDFEEnabled 1.3.6.1.4.1.25506.2.42.1.3.4.1.16
Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOltLaserOnTimeMinVal 1.3.6.1.4.1.25506.2.42.1.3.5
The lower limit of time which is confined to hh3cOltLaserOnTime.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltLaserOnTimeMaxVal 1.3.6.1.4.1.25506.2.42.1.3.6
The upper limit of time which is confined to hh3cOltLaserOnTime.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltLaserOffTimeMinVal 1.3.6.1.4.1.25506.2.42.1.3.7
The lower limit of time which is confined to hh3cOltLaserOffTime.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltLaserOffTimeMaxVal 1.3.6.1.4.1.25506.2.42.1.3.8
The upper limit of time which is confined to hh3cOltLaserOffTime.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltDbaDiscoveryLengthMinVal 1.3.6.1.4.1.25506.2.42.1.3.9
The lower limit of the discovery length which is confined to hh3cOltDbaDiscoveryLength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltDbaDiscoveryLengthMaxVal 1.3.6.1.4.1.25506.2.42.1.3.10
The upper limit of the discovery length which is confined to hh3cOltDbaDiscoveryLength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltDbaDiscovryFrequencyMinVal 1.3.6.1.4.1.25506.2.42.1.3.11
The lower limit of the discovery length which is confined to hh3cOltDbaDiscovryFrequency.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltDbaDiscovryFrequencyMaxVal 1.3.6.1.4.1.25506.2.42.1.3.12
The upper limit of the discovery length which is confined to hh3cOltDbaDiscovryFrequency.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltDbaCycleLengthMinVal 1.3.6.1.4.1.25506.2.42.1.3.13
The lower limit of the frames which is confined to hh3cOltDbaCycleLength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltDbaCycleLengthMaxVal 1.3.6.1.4.1.25506.2.42.1.3.14
The upper limit of the frames which is confined to hh3cOltDbaCycleLength.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmLlidMisMinVal 1.3.6.1.4.1.25506.2.42.1.3.15
The lower limit of the frames which is confined to hh3cOltPortAlarmLlidMismatchThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmLlidMisMaxVal 1.3.6.1.4.1.25506.2.42.1.3.16
The upper limit of the frames which is confined to hh3cOltPortAlarmLlidMismatchThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmBerMinVal 1.3.6.1.4.1.25506.2.42.1.3.17
The lower limit of threshold which is confined to hh3cOltPortAlarmBerThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmBerMaxVal 1.3.6.1.4.1.25506.2.42.1.3.18
The upper limit of threshold which is confined to hh3cOltPortAlarmBerThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmFerMinVal 1.3.6.1.4.1.25506.2.42.1.3.19
The lower limit of threshold which is confined to hh3cOltPortAlarmFerThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltPortAlarmFerMaxVal 1.3.6.1.4.1.25506.2.42.1.3.20
The upper limit of threshold which is confined to hh3cOltPortAlarmFerThreshold.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuSilentTable 1.3.6.1.4.1.25506.2.42.1.3.21
This table is used for getting silent ONU information of OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuSilentEntry

hh3cOnuSilentEntry 1.3.6.1.4.1.25506.2.42.1.3.21.1
The entry of the table hh3cOnuSilentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuSilentEntry  

hh3cOnuSilentMacAddr 1.3.6.1.4.1.25506.2.42.1.3.21.1.1
The MAC address of silent ONUs in OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hh3cOnuSilentTime 1.3.6.1.4.1.25506.2.42.1.3.21.1.2
The aging time of a silent ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltUsingOnuTable 1.3.6.1.4.1.25506.2.42.1.3.22
The table containing configurations to manage ONU interface(s) based on OLT interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOltUsingOnuEntry

hh3cOltUsingOnuEntry 1.3.6.1.4.1.25506.2.42.1.3.22.1
The entry of the table hh3cOltUsingOnuTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOltUsingOnuEntry  

hh3cOltUsingOnuNum 1.3.6.1.4.1.25506.2.42.1.3.22.1.1
The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hh3cOltUsingOnuIfIndex 1.3.6.1.4.1.25506.2.42.1.3.22.1.2
The ifIndex of the ONU interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOltUsingOnuRowStatus 1.3.6.1.4.1.25506.2.42.1.3.22.1.3
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cEponOnuMan 1.3.6.1.4.1.25506.2.42.1.5
OBJECT IDENTIFIER    

hh3cOnuSysManTable 1.3.6.1.4.1.25506.2.42.1.5.1
This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuSysManEntry

hh3cOnuSysManEntry 1.3.6.1.4.1.25506.2.42.1.5.1.1
The entry of the table hh3cOnuSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuSysManEntry  

hh3cOnuEncryptMan 1.3.6.1.4.1.25506.2.42.1.5.1.1.1
Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), downlink(2), updownlink(3)  

hh3cOnuReAuthorize 1.3.6.1.4.1.25506.2.42.1.5.1.1.2
Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reAuthorize(1)  

hh3cOnuMulticastFilterStatus 1.3.6.1.4.1.25506.2.42.1.5.1.1.3
true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuDbaReportQueueSetNumber 1.3.6.1.4.1.25506.2.42.1.5.1.1.4
The number of queue sets reported in MPCP report frames.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuRemoteFecStatus 1.3.6.1.4.1.25506.2.42.1.5.1.1.5
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cOnuPortBerStatus 1.3.6.1.4.1.25506.2.42.1.5.1.1.6
enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cOnuReset 1.3.6.1.4.1.25506.2.42.1.5.1.1.7
Reboot ONU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hh3cOnuMulticastControlMode 1.3.6.1.4.1.25506.2.42.1.5.1.1.8
igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER igmpsnooping(1), multicastcontrol(2)  

hh3cOnuAccessVlan 1.3.6.1.4.1.25506.2.42.1.5.1.1.9
The VLAN ID assigned to untagged frames received on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuEncryptKey 1.3.6.1.4.1.25506.2.42.1.5.1.1.10
The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

hh3cOnuUniUpDownTrapStatus 1.3.6.1.4.1.25506.2.42.1.5.1.1.11
true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuFecStatus 1.3.6.1.4.1.25506.2.42.1.5.1.1.12
Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cOnuMcastCtrlHostAgingTime 1.3.6.1.4.1.25506.2.42.1.5.1.1.13
The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuMulticastFastLeaveEnable 1.3.6.1.4.1.25506.2.42.1.5.1.1.14
true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuPortIsolateEnable 1.3.6.1.4.1.25506.2.42.1.5.1.1.15
true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuLinkTestTable 1.3.6.1.4.1.25506.2.42.1.5.2
LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuLinkTestEntry

hh3cOnuLinkTestEntry 1.3.6.1.4.1.25506.2.42.1.5.2.1
The entry of hh3cOnuLinkTestEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuLinkTestEntry  

hh3cOnuLinkTestFrameNum 1.3.6.1.4.1.25506.2.42.1.5.2.1.1
Exact number of measurement frames.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuLinkTestFrameSize 1.3.6.1.4.1.25506.2.42.1.5.2.1.2
Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 60..1514  

hh3cOnuLinkTestDelay 1.3.6.1.4.1.25506.2.42.1.5.2.1.3
true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuLinkTestVlanTag 1.3.6.1.4.1.25506.2.42.1.5.2.1.4
true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuLinkTestVlanPriority 1.3.6.1.4.1.25506.2.42.1.5.2.1.5
VLAN priority: 0-7.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hh3cOnuLinkTestVlanTagID 1.3.6.1.4.1.25506.2.42.1.5.2.1.6
VLAN ID: 1-4094.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

hh3cOnuLinkTestResultSentFrameNum 1.3.6.1.4.1.25506.2.42.1.5.2.1.7
The total number of frames sent during the link test process.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuLinkTestResultRetFrameNum 1.3.6.1.4.1.25506.2.42.1.5.2.1.8
The total number of frames return back during the link test process.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuLinkTestResultRetErrFrameNum 1.3.6.1.4.1.25506.2.42.1.5.2.1.9
The total number of error frames return back during the link test process.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuLinkTestResultMinDelay 1.3.6.1.4.1.25506.2.42.1.5.2.1.10
The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuLinkTestResultMeanDelay 1.3.6.1.4.1.25506.2.42.1.5.2.1.11
The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuLinkTestResultMaxDelay 1.3.6.1.4.1.25506.2.42.1.5.2.1.12
The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuBandWidthTable 1.3.6.1.4.1.25506.2.42.1.5.3
Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuBandWidthEntry

hh3cOnuBandWidthEntry 1.3.6.1.4.1.25506.2.42.1.5.3.1
The entry of table hh3cOnuBandWidthTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuBandWidthEntry  

hh3cOnuDownStreamBandWidthPolicy 1.3.6.1.4.1.25506.2.42.1.5.3.1.1
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuDownStreamMaxBandWidth 1.3.6.1.4.1.25506.2.42.1.5.3.1.2
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000000  

hh3cOnuDownStreamMaxBurstSize 1.3.6.1.4.1.25506.2.42.1.5.3.1.3
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8388480  

hh3cOnuDownStreamHighPriorityFirst 1.3.6.1.4.1.25506.2.42.1.5.3.1.4
true:Enable high priority frames preference. false:Disable high priority frames preference.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuDownStreamShortFrameFirst 1.3.6.1.4.1.25506.2.42.1.5.3.1.5
true:Enable short frames preference. false:Disable short frames preference.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuP2PBandWidthPolicy 1.3.6.1.4.1.25506.2.42.1.5.3.1.6
true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuP2PMaxBandWidth 1.3.6.1.4.1.25506.2.42.1.5.3.1.7
Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..1000000  

hh3cOnuP2PMaxBurstSize 1.3.6.1.4.1.25506.2.42.1.5.3.1.8
Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8388480  

hh3cOnuP2PHighPriorityFirst 1.3.6.1.4.1.25506.2.42.1.5.3.1.9
true:Enable high priority frames preference. false:Disable high priority frames preference.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuP2PShortFrameFirst 1.3.6.1.4.1.25506.2.42.1.5.3.1.10
true:Enable short frames preference. false:Disable short frames preference.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuSlaManTable 1.3.6.1.4.1.25506.2.42.1.5.4
Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuSlaManEntry

hh3cOnuSlaManEntry 1.3.6.1.4.1.25506.2.42.1.5.4.1
The entry of table hh3cOnuSlaManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuSlaManEntry  

hh3cOnuSlaMaxBandWidth 1.3.6.1.4.1.25506.2.42.1.5.4.1.1
Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaMinBandWidth 1.3.6.1.4.1.25506.2.42.1.5.4.1.2
Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaBandWidthStepVal 1.3.6.1.4.1.25506.2.42.1.5.4.1.3
Granularity of bandwidth - measured in Kbit/s. The value of hh3cOnuSlaMaxBandWidth and hh3cOnuSlaMinBandWidth should be the multiple of the value of this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaDelay 1.3.6.1.4.1.25506.2.42.1.5.4.1.4
low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER low(1), high(2)  

hh3cOnuSlaFixedBandWidth 1.3.6.1.4.1.25506.2.42.1.5.4.1.5
Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaPriorityClass 1.3.6.1.4.1.25506.2.42.1.5.4.1.6
Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaFixedPacketSize 1.3.6.1.4.1.25506.2.42.1.5.4.1.7
Fixed packet size - measured in byte. The value of this object should be valid when hh3cOnuSlaFixedBandWidth is configured.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuInfoTable 1.3.6.1.4.1.25506.2.42.1.5.5
Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hh3cOnuHardMajorVersion, hh3cOnuHardMinorVersion, hh3cOnuUniMacType) (2)Several physical capabilities of the ONU. (hh3cOnuLaserOnTime, hh3cOnuLaserOffTime, hh3cOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hh3cOnuWorkMode)
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuInfoEntry

hh3cOnuInfoEntry 1.3.6.1.4.1.25506.2.42.1.5.5.1
The entry of the hh3cOnuInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuInfoEntry  

hh3cOnuHardMajorVersion 1.3.6.1.4.1.25506.2.42.1.5.5.1.1
ONU hardware major version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuHardMinorVersion 1.3.6.1.4.1.25506.2.42.1.5.5.1.2
ONU hardware minor version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuSoftwareVersion 1.3.6.1.4.1.25506.2.42.1.5.5.1.3
ONU software version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuUniMacType 1.3.6.1.4.1.25506.2.42.1.5.5.1.4
ONU User Network Interface(UNI) port MAC type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), mii(2), gmii(3), tbi(4)  

hh3cOnuLaserOnTime 1.3.6.1.4.1.25506.2.42.1.5.5.1.5
The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOnTime is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuLaserOffTime 1.3.6.1.4.1.25506.2.42.1.5.5.1.6
The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOffTime is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuGrantFifoDep 1.3.6.1.4.1.25506.2.42.1.5.5.1.7
Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255 | 2147483647  

hh3cOnuWorkMode 1.3.6.1.4.1.25506.2.42.1.5.5.1.8
The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(1), on(2), pending(3), off(4)  

hh3cOnuPCBVersion 1.3.6.1.4.1.25506.2.42.1.5.5.1.9
ONU PCB version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuRtt 1.3.6.1.4.1.25506.2.42.1.5.5.1.10
The signal round-trip-time(RTT) received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cOnuEEPROMVersion 1.3.6.1.4.1.25506.2.42.1.5.5.1.11
ONU EEPROM version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuRegType 1.3.6.1.4.1.25506.2.42.1.5.5.1.12
ONU registered type.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuHostType 1.3.6.1.4.1.25506.2.42.1.5.5.1.13
ONU host type.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuDistance 1.3.6.1.4.1.25506.2.42.1.5.5.1.14
The distance between OLT and ONU, measured in meter.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuLlid 1.3.6.1.4.1.25506.2.42.1.5.5.1.15
The link layer identifier, which uniquely identifies the ONU of a specific OLT.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuVendorId 1.3.6.1.4.1.25506.2.42.1.5.5.1.16
ONU vendor ID.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuFirmwareVersion 1.3.6.1.4.1.25506.2.42.1.5.5.1.17
ONU firmware version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuOpticalPowerReceivedByOlt 1.3.6.1.4.1.25506.2.42.1.5.5.1.18
The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuMacAddrInfoTable 1.3.6.1.4.1.25506.2.42.1.5.6
This table used for getting MAC address information of ONU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuMacAddrInfoEntry

hh3cOnuMacAddrInfoEntry 1.3.6.1.4.1.25506.2.42.1.5.6.1
The entry of the hh3cEponOnuMacAddrInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuMacAddrInfoEntry  

hh3cOnuMacIndex 1.3.6.1.4.1.25506.2.42.1.5.6.1.1
The index of ONUs in one OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cOnuMacAddrFlag 1.3.6.1.4.1.25506.2.42.1.5.6.1.2
The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bound(1), registered(2), run(3), regIncorrect(4)  

hh3cOnuMacAddress 1.3.6.1.4.1.25506.2.42.1.5.6.1.3
The MAC address of ONU.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hh3cOnuBindMacAddrTable 1.3.6.1.4.1.25506.2.42.1.5.7
This table implements the following functions for ONUs: Bind MAC of ONU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuBindMacAddrEntry

hh3cOnuBindMacAddrEntry 1.3.6.1.4.1.25506.2.42.1.5.7.1
The entry of the table hh3cOnuBindMacAddrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuBindMacAddrEntry  

hh3cOnuBindMacAddress 1.3.6.1.4.1.25506.2.42.1.5.7.1.1
Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

hh3cOnuBindType 1.3.6.1.4.1.25506.2.42.1.5.7.1.2
Set the binding type with the ONU which is confined to the index of hh3cEponOnuTypeDescr.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuFirmwareUpdateTable 1.3.6.1.4.1.25506.2.42.1.5.8
This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuFirmwareUpdateEntry

hh3cOnuFirmwareUpdateEntry 1.3.6.1.4.1.25506.2.42.1.5.8.1
The entry of the table hh3cOnuFirmwareUpdateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuFirmwareUpdateEntry  

hh3cOnuUpdate 1.3.6.1.4.1.25506.2.42.1.5.8.1.1
update(1): Update the ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER update(1)  

hh3cOnuUpdateResult 1.3.6.1.4.1.25506.2.42.1.5.8.1.2
The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER updating(1), ok(2), fail(3), fileNotExist(4), notSetFilename(5), fileNotMatchONU(6), timeout(7), otherError(8)  

hh3cOnuUpdateFileName 1.3.6.1.4.1.25506.2.42.1.5.8.1.3
The filename of the ONU firmware to be updated. Note that the filename must contain the file path.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cOnuLinkTestFrameNumMinVal 1.3.6.1.4.1.25506.2.42.1.5.9
The lower limit of measurement frames which is confined to hh3cOnuLinkTestFrameNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuLinkTestFrameNumMaxVal 1.3.6.1.4.1.25506.2.42.1.5.10
The upper limit of measurement frames which is confined to hh3cOnuLinkTestFrameNum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaMaxBandWidthMinVal 1.3.6.1.4.1.25506.2.42.1.5.11
The lower limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaMaxBandWidthMaxVal 1.3.6.1.4.1.25506.2.42.1.5.12
The upper limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaMinBandWidthMinVal 1.3.6.1.4.1.25506.2.42.1.5.13
The lower limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuSlaMinBandWidthMaxVal 1.3.6.1.4.1.25506.2.42.1.5.14
The upper limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponOnuTypeManTable 1.3.6.1.4.1.25506.2.42.1.5.15
This table is used for getting ONU bind type in current version.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponOnuTypeManEntry

hh3cEponOnuTypeManEntry 1.3.6.1.4.1.25506.2.42.1.5.15.1
The entry of the hh3cEponOnuTypeManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponOnuTypeManEntry  

hh3cEponOnuTypeIndex 1.3.6.1.4.1.25506.2.42.1.5.15.1.1
The ONU type index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cEponOnuTypeDescr 1.3.6.1.4.1.25506.2.42.1.5.15.1.2
The ONU type description which can be used to bind ONU in current version. the value of hh3cOnuBindType can be configured by the index of hh3cEponOnuTypeDescr.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuPacketManTable 1.3.6.1.4.1.25506.2.42.1.5.16
This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuPacketManEntry

hh3cOnuPacketManEntry 1.3.6.1.4.1.25506.2.42.1.5.16.1
The entry of the hh3cOnuPacketManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuPacketManEntry  

hh3cOnuPriorityTrust 1.3.6.1.4.1.25506.2.42.1.5.16.1.1
The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dscp(1), ipprecedence(2), cos(3)  

hh3cOnuQueueScheduler 1.3.6.1.4.1.25506.2.42.1.5.16.1.2
The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER spq(1), wfq(2)  

hh3cOnuProtocolTable 1.3.6.1.4.1.25506.2.42.1.5.17
This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuProtocolEntry

hh3cOnuProtocolEntry 1.3.6.1.4.1.25506.2.42.1.5.17.1
The entry of hh3cOnuProtocolTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuProtocolEntry  

hh3cOnuStpStatus 1.3.6.1.4.1.25506.2.42.1.5.17.1.1
true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuIgmpSnoopingStatus 1.3.6.1.4.1.25506.2.42.1.5.17.1.2
true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuDhcpsnoopingOption82 1.3.6.1.4.1.25506.2.42.1.5.17.1.3
true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuDhcpsnooping 1.3.6.1.4.1.25506.2.42.1.5.17.1.4
true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuPppoe 1.3.6.1.4.1.25506.2.42.1.5.17.1.5
true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuIgmpSnoopingHostAgingT 1.3.6.1.4.1.25506.2.42.1.5.17.1.6
Set the host aging time of IGMP on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuIgmpSnoopingMaxRespT 1.3.6.1.4.1.25506.2.42.1.5.17.1.7
Set the max response time of IGMP on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuIgmpSnoopingRouterAgingT 1.3.6.1.4.1.25506.2.42.1.5.17.1.8
Set the router aging time of IGMP on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuIgmpSnoopingAggReportS 1.3.6.1.4.1.25506.2.42.1.5.17.1.9
true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuIgmpSnoopingAggLeaveS 1.3.6.1.4.1.25506.2.42.1.5.17.1.10
true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuDot1xTable 1.3.6.1.4.1.25506.2.42.1.5.18
This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuDot1xEntry

hh3cOnuDot1xEntry 1.3.6.1.4.1.25506.2.42.1.5.18.1
The entry of the hh3cOnuDot1xTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuDot1xEntry  

hh3cOnuDot1xAccount 1.3.6.1.4.1.25506.2.42.1.5.18.1.1
ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hh3cOnuDot1xPassword.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hh3cOnuDot1xPassword 1.3.6.1.4.1.25506.2.42.1.5.18.1.2
ONU 802.1X password. The object should be set together with hh3cOnuDot1xAccount.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

hh3cEponBatchOperationMan 1.3.6.1.4.1.25506.2.42.1.6
OBJECT IDENTIFIER    

hh3cOnuPriorityQueueTable 1.3.6.1.4.1.25506.2.42.1.5.19
This table contains specific information of priority queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuPriorityQueueEntry

hh3cOnuPriorityQueueEntry 1.3.6.1.4.1.25506.2.42.1.5.19.1
The entry of hh3cOnuPriorityQueueTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuPriorityQueueEntry  

hh3cOnuQueueDirection 1.3.6.1.4.1.25506.2.42.1.5.19.1.1
The direction of priority queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2)  

hh3cOnuQueueId 1.3.6.1.4.1.25506.2.42.1.5.19.1.2
The queue ID of priority queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..7  

hh3cOnuQueueSize 1.3.6.1.4.1.25506.2.42.1.5.19.1.3
The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hh3cOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuCountTable 1.3.6.1.4.1.25506.2.42.1.5.20
This table contains statistics of ONU port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuCountEntry

hh3cOnuCountEntry 1.3.6.1.4.1.25506.2.42.1.5.20.1
The entry of hh3cOnuCountTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuCountEntry  

hh3cOnuInCRCErrPkts 1.3.6.1.4.1.25506.2.42.1.5.20.1.1
The total number of frames received with bad CRC checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cOnuOutDroppedFrames 1.3.6.1.4.1.25506.2.42.1.5.20.1.2
The total number of frames dropped because of buffer failure.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cEponOnuScalarGroup 1.3.6.1.4.1.25506.2.42.1.5.21
OBJECT IDENTIFIER    

hh3cOnuPriorityQueueSizeMinVal 1.3.6.1.4.1.25506.2.42.1.5.21.1
The lower limit of queue size which is confined to hh3cOnuQueueSize.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuPriorityQueueSizeMaxVal 1.3.6.1.4.1.25506.2.42.1.5.21.2
The upper limit of queue size which is confined to hh3cOnuQueueSize.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuPriorityQueueBandwidthMinVal 1.3.6.1.4.1.25506.2.42.1.5.21.3
The lower limit of hh3cOnuQueueMaxBandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuPriorityQueueBandwidthMaxVal 1.3.6.1.4.1.25506.2.42.1.5.21.4
The upper limit of hh3cOnuQueueMaxBandwidth.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuPriorityQueueBurstsizeMinVal 1.3.6.1.4.1.25506.2.42.1.5.21.5
The lower limit of hh3cOnuQueueMaxBurstsize.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuPriorityQueueBurstsizeMaxVal 1.3.6.1.4.1.25506.2.42.1.5.21.6
The upper limit of hh3cOnuQueueMaxBurstsize.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuUpdateByTypeNextIndex 1.3.6.1.4.1.25506.2.42.1.5.21.7
Offer a free index of hh3cOnuFirmwareUpdateByTypeTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuQueueBandwidthTable 1.3.6.1.4.1.25506.2.42.1.5.22
This table contains specific bandwidth information of ONU priority queue.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuQueueBandwidthEntry

hh3cOnuQueueBandwidthEntry 1.3.6.1.4.1.25506.2.42.1.5.22.1
The entry of hh3cOnuQueueBandwidthTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuQueueBandwidthEntry  

hh3cOnuQueueMaxBandwidth 1.3.6.1.4.1.25506.2.42.1.5.22.1.1
The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuQueueMaxBurstsize 1.3.6.1.4.1.25506.2.42.1.5.22.1.2
The maximum burst size of specific ONU priority queue, measured in 64Bytes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuQueuePolicyStatus 1.3.6.1.4.1.25506.2.42.1.5.22.1.3
true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuIpAddressTable 1.3.6.1.4.1.25506.2.42.1.5.23
ONU IP address table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuIpAddressEntry

hh3cOnuIpAddressEntry 1.3.6.1.4.1.25506.2.42.1.5.23.1
The entry of hh3cOnuIpAddressTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuIpAddressEntry  

hh3cOnuIpAddress 1.3.6.1.4.1.25506.2.42.1.5.23.1.1
The IP address assigned to the ONU.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3cOnuIpAddressMask 1.3.6.1.4.1.25506.2.42.1.5.23.1.2
The mask of IP address denoted by hh3cOnuIpAddress.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3cOnuIpAddressGateway 1.3.6.1.4.1.25506.2.42.1.5.23.1.3
The gateway of IP address denoted by hh3cOnuIpAddress.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

hh3cOnuDhcpallocate 1.3.6.1.4.1.25506.2.42.1.5.23.1.4
true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuManageVID 1.3.6.1.4.1.25506.2.42.1.5.23.1.5
The management VLAN of ONU denoted by hh3cOnuManageVID.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuManageVlanIntfS 1.3.6.1.4.1.25506.2.42.1.5.23.1.6
The management interface status of ONU denoted by hh3cOnuManageVlanIntfS.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cOnuChipSetInfoTable 1.3.6.1.4.1.25506.2.42.1.5.24
ONU vendor specific information of ONU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuChipSetInfoEntry

hh3cOnuChipSetInfoEntry 1.3.6.1.4.1.25506.2.42.1.5.24.1
The entry of hh3cOnuChipSetInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuChipSetInfoEntry  

hh3cOnuChipSetVendorId 1.3.6.1.4.1.25506.2.42.1.5.24.1.1
Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cOnuChipSetModel 1.3.6.1.4.1.25506.2.42.1.5.24.1.2
Chip model, numbering(range from 0 to 0xFF) by the chip vendor.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cOnuChipSetRevision 1.3.6.1.4.1.25506.2.42.1.5.24.1.3
Chip revision.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuChipSetDesignDate 1.3.6.1.4.1.25506.2.42.1.5.24.1.4
Chip design date.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hh3cOnuCapabilityTable 1.3.6.1.4.1.25506.2.42.1.5.25
Capability of ONU.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuCapabilityEntry

hh3cOnuCapabilityEntry 1.3.6.1.4.1.25506.2.42.1.5.25.1
The entry of the table hh3cOnuCapabilityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuCapabilityEntry  

hh3cOnuServiceSupported 1.3.6.1.4.1.25506.2.42.1.5.25.1.1
Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.
Status: current Access: read-only
OBJECT-TYPE    
  BITS geinterfacesupport(0), feinterfacesupport(1), voipservicesupport(2), tdmservicesupport(3)  

hh3cOnuGEPortNumber 1.3.6.1.4.1.25506.2.42.1.5.25.1.2
The current gigabit ethernet ports number supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuFEPortNumber 1.3.6.1.4.1.25506.2.42.1.5.25.1.3
the current fast ethernet ports number supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuPOTSPortNumber 1.3.6.1.4.1.25506.2.42.1.5.25.1.4
The current POTS ports number supported by the ONU
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuE1PortsNumber 1.3.6.1.4.1.25506.2.42.1.5.25.1.5
The current E1 ports number supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuUpstreamQueueNumber 1.3.6.1.4.1.25506.2.42.1.5.25.1.6
The number of upstream queues supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuMaxUpstreamQueuePerPort 1.3.6.1.4.1.25506.2.42.1.5.25.1.7
The number of maximum upstream queues per port of the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuDownstreamQueueNumber 1.3.6.1.4.1.25506.2.42.1.5.25.1.8
The number of downstream queues supported by the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuMaxDownstreamQueuePerPort 1.3.6.1.4.1.25506.2.42.1.5.25.1.9
The number of maximum downstream queues per port of the ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuBatteryBackup 1.3.6.1.4.1.25506.2.42.1.5.25.1.10
true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hh3cOnuIgspFastLeaveSupported 1.3.6.1.4.1.25506.2.42.1.5.25.1.11
true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hh3cOnuMCtrlFastLeaveSupported 1.3.6.1.4.1.25506.2.42.1.5.25.1.12
true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

hh3cOnuDbaReportTable 1.3.6.1.4.1.25506.2.42.1.5.26
This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuDbaReportEntry

hh3cOnuDbaReportEntry 1.3.6.1.4.1.25506.2.42.1.5.26.1
The entry of the table hh3cOnuDbaReportTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuDbaReportEntry  

hh3cOnuDbaReportQueueId 1.3.6.1.4.1.25506.2.42.1.5.26.1.1
The DBA report queue ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cOnuDbaReportThreshold 1.3.6.1.4.1.25506.2.42.1.5.26.1.2
The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cOnuDbaReportStatus 1.3.6.1.4.1.25506.2.42.1.5.26.1.3
enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cOnuCosToLocalPrecedenceTable 1.3.6.1.4.1.25506.2.42.1.5.27
Table of map of the COS to local-precedence.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuCosToLocalPrecedenceEntry

hh3cOnuCosToLocalPrecedenceEntry 1.3.6.1.4.1.25506.2.42.1.5.27.1
Configuration information of map of the COS to local precedence.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuCosToLocalPrecedenceEntry  

hh3cOnuCosToLocalPrecedenceCosIndex 1.3.6.1.4.1.25506.2.42.1.5.27.1.1
Index of the map, obtains from packet cos value.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

hh3cOnuCosToLocalPrecedenceValue 1.3.6.1.4.1.25506.2.42.1.5.27.1.2
Value of local precedence.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hh3cEponOnuStpPortTable 1.3.6.1.4.1.25506.2.42.1.5.28
Table of ONU STP ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponOnuStpPortEntry

hh3cEponOnuStpPortEntry 1.3.6.1.4.1.25506.2.42.1.5.28.1
Configuration information of ONU STP ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponOnuStpPortEntry  

hh3cEponStpPortIndex 1.3.6.1.4.1.25506.2.42.1.5.28.1.1
The index of the STP ports.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 0..144  

hh3cEponStpPortDescr 1.3.6.1.4.1.25506.2.42.1.5.28.1.2
The description of the STP ports.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hh3cEponStpPortState 1.3.6.1.4.1.25506.2.42.1.5.28.1.3
The current state of the port (i.e. disabled, discarding, learning and forwarding).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER disabled(1), discarding(2), learning(3), forwarding(4)  

hh3cOnuPhysicalTable 1.3.6.1.4.1.25506.2.42.1.5.29
This table is used for getting ONU physical information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuPhysicalEntry

hh3cOnuPhysicalEntry 1.3.6.1.4.1.25506.2.42.1.5.29.1
The entry of the hh3cOnuPhysicalTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuPhysicalEntry  

hh3cOnuBridgeMac 1.3.6.1.4.1.25506.2.42.1.5.29.1.1
The bridge MAC address of ONU.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hh3cOnuFirstPonMac 1.3.6.1.4.1.25506.2.42.1.5.29.1.2
The MAC address of ONU first PON port.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hh3cOnuFirstPonRegState 1.3.6.1.4.1.25506.2.42.1.5.29.1.3
The register state of ONU first PON port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notExist(1), absent(2), offline(3), silent(4), down(5), up(6)  

hh3cOnuSecondPonMac 1.3.6.1.4.1.25506.2.42.1.5.29.1.4
The MAC address of ONU second PON port.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hh3cOnuSecondPonRegState 1.3.6.1.4.1.25506.2.42.1.5.29.1.5
The register state of ONU second PON port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notExist(1), absent(2), offline(3), silent(4), down(5), up(6)  

hh3cOnuSmlkTable 1.3.6.1.4.1.25506.2.42.1.5.30
This table is used for getting ONU SMLK information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuSmlkEntry

hh3cOnuSmlkEntry 1.3.6.1.4.1.25506.2.42.1.5.30.1
The entry of the hh3cOnuSmlkTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuSmlkEntry  

hh3cOnuSmlkGroupID 1.3.6.1.4.1.25506.2.42.1.5.30.1.1
The SMLK group ID of ONU.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuSmlkFirstPonRole 1.3.6.1.4.1.25506.2.42.1.5.30.1.2
The role of ONU first PON port in a SMLK group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2), null(3)  

hh3cOnuSmlkFirstPonStatus 1.3.6.1.4.1.25506.2.42.1.5.30.1.3
The transmitting status of ONU first PON port in a SMLK group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2), down(3), null(4)  

hh3cOnuSmlkSecondPonRole 1.3.6.1.4.1.25506.2.42.1.5.30.1.4
The role of ONU second PON port in a SMLK group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER master(1), slave(2), null(3)  

hh3cOnuSmlkSecondPonStatus 1.3.6.1.4.1.25506.2.42.1.5.30.1.5
The transmitting status of ONU second PON port in a SMLK group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2), down(3), null(4)  

hh3cOnuRS485PropertiesTable 1.3.6.1.4.1.25506.2.42.1.5.31
Property table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuRS485PropertiesEntry

hh3cOnuRS485PropertiesEntry 1.3.6.1.4.1.25506.2.42.1.5.31.1
The entry of property table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuRS485PropertiesEntry  

hh3cOnuRS485SerialIndex 1.3.6.1.4.1.25506.2.42.1.5.31.1.1
The index of serial port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hh3cOnuRS485BaudRate 1.3.6.1.4.1.25506.2.42.1.5.31.1.2
The port baud rate.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER baudRate300(1), baudRate600(2), baudRate1200(3), baudRate2400(4), baudRate4800(5), baudRate9600(6), baudRate19200(7), baudRate38400(8), baudRate57600(9), baudRate115200(10)  

hh3cOnuRS485DataBits 1.3.6.1.4.1.25506.2.42.1.5.31.1.3
The port number of data bits in a character.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER five(1), six(2), seven(3), eight(4)  

hh3cOnuRS485Parity 1.3.6.1.4.1.25506.2.42.1.5.31.1.4
The port sense of a character parity bit.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

hh3cOnuRS485StopBits 1.3.6.1.4.1.25506.2.42.1.5.31.1.5
The port number of stop bits.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER one(1), two(2), oneAndHalf(3)  

hh3cOnuRS485FlowControl 1.3.6.1.4.1.25506.2.42.1.5.31.1.6
The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), hardware(2), xonOrxoff(3)  

hh3cOnuRS485TXOctets 1.3.6.1.4.1.25506.2.42.1.5.31.1.7
The number of output octets about the port. The unit is byte.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuRS485RXOctets 1.3.6.1.4.1.25506.2.42.1.5.31.1.8
The number of input octets about the port. The unit is byte.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuRS485TXErrOctets 1.3.6.1.4.1.25506.2.42.1.5.31.1.9
The number of output error octets about the port. The unit is byte.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuRS485RXErrOctets 1.3.6.1.4.1.25506.2.42.1.5.31.1.10
The number of input error octets about the port. The unit is byte.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuRS485ResetStatistics 1.3.6.1.4.1.25506.2.42.1.5.31.1.11
Reset the counters to zero, including hh3cOnuRS485TXOctets, hh3cOnuRS485RXOctets, hh3cOnuRS485TXErrOctets and hh3cOnuRS485RXErrOctets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER counting(1), clear(2)  

hh3cOnuRS485SessionSummaryTable 1.3.6.1.4.1.25506.2.42.1.5.32
Session summary table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuRS485SessionSummaryEntry

hh3cOnuRS485SessionSummaryEntry 1.3.6.1.4.1.25506.2.42.1.5.32.1
The entry of session summary table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuRS485SessionSummaryEntry  

hh3cOnuRS485SessionMaxNum 1.3.6.1.4.1.25506.2.42.1.5.32.1.1
The max session number of every serial port which can be supported.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..64  

hh3cOnuRS485SessionNextIndex 1.3.6.1.4.1.25506.2.42.1.5.32.1.2
The next valid index used for creating a new session raw. When there is no valid index left, it will return 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..64  

hh3cOnuRS485SessionTable 1.3.6.1.4.1.25506.2.42.1.5.33
RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuRS485SessionEntry

hh3cOnuRS485SessionEntry 1.3.6.1.4.1.25506.2.42.1.5.33.1
The entry of session table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuRS485SessionEntry  

hh3cOnuRS485SessionIndex 1.3.6.1.4.1.25506.2.42.1.5.33.1.1
Raw session index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..64  

hh3cOnuRS485SessionType 1.3.6.1.4.1.25506.2.42.1.5.33.1.2
The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER udp(1), tcpClient(2), tcpServer(3)  

hh3cOnuRS485SessionAddType 1.3.6.1.4.1.25506.2.42.1.5.33.1.3
This object indicates the transport type of the address contained in hh3cOnuRS485SessionRemoteIP object.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

hh3cOnuRS485SessionRemoteIP 1.3.6.1.4.1.25506.2.42.1.5.33.1.4
The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

hh3cOnuRS485SessionRemotePort 1.3.6.1.4.1.25506.2.42.1.5.33.1.5
The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1024..65535  

hh3cOnuRS485SessionLocalPort 1.3.6.1.4.1.25506.2.42.1.5.33.1.6
Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1024..65535  

hh3cOnuRS485SessionRowStatus 1.3.6.1.4.1.25506.2.42.1.5.33.1.7
The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cOnuRS485SessionErrInfoTable 1.3.6.1.4.1.25506.2.42.1.5.34
Error information table. When failed to create a session, error information can be got from this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuRS485SessionErrInfoEntry

hh3cOnuRS485SessionErrInfoEntry 1.3.6.1.4.1.25506.2.42.1.5.34.1
The entry of error information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuRS485SessionErrInfoEntry  

hh3cOnuRS485SessionErrInfo 1.3.6.1.4.1.25506.2.42.1.5.34.1.1
Error information string. When a response with 'noCreeation' for row creation in table hh3cOnuRS485SessionTable, the error reason can be got from this object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hh3cEponBatchOperationBySlotTable 1.3.6.1.4.1.25506.2.42.1.6.1
This table is used for batch operation by slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponBatchOperationBySlotEntry

hh3cEponBatchOperationBySlotEntry 1.3.6.1.4.1.25506.2.42.1.6.1.1
The entry of the hh3cEponBatchOperationBySlotTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponBatchOperationBySlotEntry  

hh3cEponBatchOperationBySlotIndex 1.3.6.1.4.1.25506.2.42.1.6.1.1.1
The EPON board index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cEponBatchOperationBySlotType 1.3.6.1.4.1.25506.2.42.1.6.1.1.2
The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hh3cEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER resetUnknown(1), updateDba(9), updateONU(10)  

hh3cEponBatchOperationBySlot 1.3.6.1.4.1.25506.2.42.1.6.1.1.3
Execute batch operation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER batOpBySlot(1)  

hh3cEponBatchOperationBySlotResult 1.3.6.1.4.1.25506.2.42.1.6.1.1.4
The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEponBatchOperationByOLTTable 1.3.6.1.4.1.25506.2.42.1.6.2
This table is used for batch operation by OLT.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponBatchOperationByOLTEntry

hh3cEponBatchOperationByOLTEntry 1.3.6.1.4.1.25506.2.42.1.6.2.1
The entry of the hh3cEponBatchOperationByOLTTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponBatchOperationByOLTEntry  

hh3cEponBatchOperationByOLTType 1.3.6.1.4.1.25506.2.42.1.6.2.1.1
The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER resetUnknown(1), updateONU(5)  

hh3cEponBatchOperationByOLT 1.3.6.1.4.1.25506.2.42.1.6.2.1.2
Execute batch operation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER batOpByOlt(1)  

hh3cEponBatchOperationByOLTResult 1.3.6.1.4.1.25506.2.42.1.6.2.1.3
The result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cOnuFirmwareUpdateByTypeTable 1.3.6.1.4.1.25506.2.42.1.6.3
This table is used to update ONU by ONU type.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cOnuFirmwareUpdateByTypeEntry

hh3cOnuFirmwareUpdateByTypeEntry 1.3.6.1.4.1.25506.2.42.1.6.3.1
The entry of the hh3cOnuFirmwareUpdateByTypeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cOnuFirmwareUpdateByTypeEntry  

hh3cOnuUpdateByOnuTypeIndex 1.3.6.1.4.1.25506.2.42.1.6.3.1.1
The type and file relationship table entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cOnuUpdateByTypeOnuType 1.3.6.1.4.1.25506.2.42.1.6.3.1.2
The type of ONUs.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

hh3cOnuUpdateByTypeFileName 1.3.6.1.4.1.25506.2.42.1.6.3.1.3
The file to be updated for the type of ONUs.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cOnuUpdateByTypeRowStatus 1.3.6.1.4.1.25506.2.42.1.6.3.1.4
The status of this table entry. Only createAndGo and destroy actions are supported.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cEponErrorInfo 1.3.6.1.4.1.25506.2.42.1.7
OBJECT IDENTIFIER    

hh3cEponSoftwareErrorCode 1.3.6.1.4.1.25506.2.42.1.7.1
OLT software error code.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cOamVendorSpecificAlarmCode 1.3.6.1.4.1.25506.2.42.1.7.2
Alarm code of the vendor.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cEponOnuRegErrorMacAddr 1.3.6.1.4.1.25506.2.42.1.7.3
The MAC of ONU registered error.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hh3cOamEventLogType 1.3.6.1.4.1.25506.2.42.1.7.4
The type of event that generated this entry in the event log.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hh3cOamEventLogLocation 1.3.6.1.4.1.25506.2.42.1.7.5
Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

hh3cEponLoopbackPortIndex 1.3.6.1.4.1.25506.2.42.1.7.6
The index of port which generate loop back event.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cEponLoopbackPortDescr 1.3.6.1.4.1.25506.2.42.1.7.7
A textual string containing information about the port generated loop back event.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cOltPortAlarmLlidMisFrames 1.3.6.1.4.1.25506.2.42.1.7.8
the amount of mismatched frames about the LLID mismatch alarm.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hh3cOltPortAlarmBer 1.3.6.1.4.1.25506.2.42.1.7.9
error bit rate.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hh3cOltPortAlarmFer 1.3.6.1.4.1.25506.2.42.1.7.10
error frames rate.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

hh3cEponOnuRegSilentMac 1.3.6.1.4.1.25506.2.42.1.7.11
The MAC of silent ONU.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hh3cEponOperationResult 1.3.6.1.4.1.25506.2.42.1.7.12
The result of EPON operation.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cEponOnuLaserState 1.3.6.1.4.1.25506.2.42.1.7.13
The state of ONU laser.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER normal(1), laserAlwaysOn(2), signalDegradation(3), endOfLife(4)  

hh3cEponTrap 1.3.6.1.4.1.25506.2.42.1.8
OBJECT IDENTIFIER    

hh3cEponTrapPrefix 1.3.6.1.4.1.25506.2.42.1.8.0
OBJECT IDENTIFIER    

hh3cEponPortAlarmBerTrap 1.3.6.1.4.1.25506.2.42.1.8.0.1
A hh3cEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponPortAlarmFerTrap 1.3.6.1.4.1.25506.2.42.1.8.0.2
A hh3cEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponErrorLLIDFrameTrap 1.3.6.1.4.1.25506.2.42.1.8.0.3
A hh3cEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponLoopBackEnableTrap 1.3.6.1.4.1.25506.2.42.1.8.0.4
A hh3cEponLoopBackEnableTrap notification is sent when the loop back command is committed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuRegistrationErrTrap 1.3.6.1.4.1.25506.2.42.1.8.0.5
A hh3cEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOamDisconnectionTrap 1.3.6.1.4.1.25506.2.42.1.8.0.6
A hh3cEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponEncryptionKeyErrTrap 1.3.6.1.4.1.25506.2.42.1.8.0.7
A hh3cEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponRemoteStableTrap 1.3.6.1.4.1.25506.2.42.1.8.0.8
A hh3cEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponLocalStableTrap 1.3.6.1.4.1.25506.2.42.1.8.0.9
A hh3cEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOamVendorSpecificTrap 1.3.6.1.4.1.25506.2.42.1.8.0.10
A hh3cEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponSoftwareErrTrap 1.3.6.1.4.1.25506.2.42.1.8.0.11
A hh3cEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponPortAlarmBerRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.12
A hh3cEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponPortAlarmFerRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.13
A hh3cEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponErrorLLIDFrameRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.14
A hh3cEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponLoopBackEnableRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.15
A hh3cEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuRegistrationErrRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.16
A hh3cEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOamDisconnectionRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.17
A hh3cEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponEncryptionKeyErrRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.18
A hh3cEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponRemoteStableRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.19
A hh3cEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponLocalStableRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.20
A hh3cEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOamVendorSpecificRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.21
A hh3cEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponSoftwareErrRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.22
A hh3cEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cDot3OamThresholdRecoverEvent 1.3.6.1.4.1.25506.2.42.1.8.0.23
A hh3cDot3OamThresholdRecoverEvent notification is sent when hh3cDot3OamThresholdEvent is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cDot3OamNonThresholdRecoverEvent 1.3.6.1.4.1.25506.2.42.1.8.0.24
A hh3cDot3OamNonThresholdRecoverEvent notification is sent when hh3cDot3OamNonThresholdEvent is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuRegExcessTrap 1.3.6.1.4.1.25506.2.42.1.8.0.25
A hh3cEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuRegExcessRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.26
A hh3cEponOnuRegExcessRecoverTrap notification is sent when hh3cEponOnuRegExcessTrap is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuPowerOffTrap 1.3.6.1.4.1.25506.2.42.1.8.0.27
A hh3cEponOnuPowerOffTrap notification is sent when ONU is power off.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOltSwitchoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.28
A hh3cEponOltSwithoverTrap notification is sent when OLT switchover is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOltDFETrap 1.3.6.1.4.1.25506.2.42.1.8.0.29
A hh3cEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOltDFERecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.30
A hh3cEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuSilenceTrap 1.3.6.1.4.1.25506.2.42.1.8.0.31
The hh3cEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuSilenceRecoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.32
The hh3cEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuUpdateResultTrap 1.3.6.1.4.1.25506.2.42.1.8.0.33
A hh3cEponUpdateResultTrap notification is sent when an ONU reported its firmware update result.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuAutoBindTrap 1.3.6.1.4.1.25506.2.42.1.8.0.34
A hh3cEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuPortStpStateTrap 1.3.6.1.4.1.25506.2.42.1.8.0.35
A hh3cEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponOnuLaserFailedTrap 1.3.6.1.4.1.25506.2.42.1.8.0.36
A hh3cEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cOnuSmlkSwitchoverTrap 1.3.6.1.4.1.25506.2.42.1.8.0.37
A hh3cOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

hh3cEponStat 1.3.6.1.4.1.25506.2.42.1.9
OBJECT IDENTIFIER    

hh3cEponStatTable 1.3.6.1.4.1.25506.2.42.1.9.1
This table contains line code error statistics of epon port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEponStatEntry

hh3cEponStatEntry 1.3.6.1.4.1.25506.2.42.1.9.1.1
The entry of hh3cEponStatTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEponStatEntry  

hh3cEponStatFER 1.3.6.1.4.1.25506.2.42.1.9.1.1.1
The frame error rate of epon port, measured in 1e-9 unit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cEponStatBER 1.3.6.1.4.1.25506.2.42.1.9.1.1.2
The bit error rate of epon port, measured in 1e-9 unit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64