HH3C-EOC-COMMON-MIB

File: HH3C-EOC-COMMON-MIB.mib (56090 bytes)

Imported modules

HH3C-OID-MIB IF-MIB SNMPv2-SMI
IANAifType-MIB SNMPv2-TC HH3C-HPEOC-MIB

Imported symbols

hh3cCommon ifIndex ifDescr
Integer32 Unsigned32 TimeTicks
OBJECT-TYPE MODULE-IDENTITY NOTIFICATION-TYPE
Gauge32 IANAifType MacAddress
RowStatus DisplayString TruthValue
hh3cHPEOCDownLoadCNUFWResult

Defined Types

Hh3cEOCCommonCltManEntry  
SEQUENCE    
  hh3cEOCCommonCltAutoAuthorize TruthValue
  hh3cEOCCommonCltMaxAllowToAccess Integer32

Hh3cEOCComCnuSysManEntry  
SEQUENCE    
  hh3cEOCComCnuCableIfindex Integer32
  hh3cEOCComCnuDeviceType DisplayString
  hh3cEOCComCnuDeviceAlias DisplayString
  hh3cEOCComCnuDescr DisplayString
  hh3cEOCComCnuUpTime TimeTicks
  hh3cEOCComCnuVLANType INTEGER
  hh3cEOCComCnuPvid Integer32
  hh3cEOCComCnuVlanTag INTEGER
  hh3cEOCComCnuReset INTEGER
  hh3cEOCComCnuDeregister INTEGER
  hh3cEOCComCnuSave INTEGER
  hh3cEOCComCnuAccess INTEGER

Hh3cEOCComCnuMacEntry  
SEQUENCE    
  hh3cEOCComCnuMacAddress MacAddress
  hh3cEOCComCnuRowStatus RowStatus
  hh3cEOCComCnuTempIndex Integer32

Hh3cEOCComCnuInfoEntry  
SEQUENCE    
  hh3cEOCComCnuHardwareVersion DisplayString
  hh3cEOCComCnuPCBVersion OCTET STRING
  hh3cEOCComCnuLinkState INTEGER
  hh3cEOCComCnuAttenuation Integer32
  hh3cEOCComCnuSoftwareVersion DisplayString
  hh3cEOCComCnuTxRate Integer32
  hh3cEOCComCnuRxRate Integer32
  hh3cEOCComCnuTxRateDrop Integer32
  hh3cEOCComCnuRxRateDrop Integer32

Hh3cEOCComCnuBandWidthEntry  
SEQUENCE    
  hh3cEOCComCnuMaxDownBW Integer32
  hh3cEOCComCnuSlaHighPriBW Integer32
  hh3cEOCComCnuMaxUpBW Integer32

Hh3cEOCComUniManEntry  
SEQUENCE    
  hh3cEOCUniIndex Unsigned32
  hh3cEOCComUniDescr DisplayString
  hh3cEOCComUniStatus INTEGER
  hh3cEOCComUniSpeed INTEGER
  hh3cEOCComUniDuplex INTEGER
  hh3cEOCComUniCurrentSpeed Gauge32
  hh3cEOCComUniCurrentDuplex INTEGER
  hh3cEOCComUniMdi INTEGER
  hh3cEOCComUniFlowControl TruthValue
  hh3cEOCComUniCountReset INTEGER
  hh3cEOCComUniAlias DisplayString
  hh3cEOCComUniType IANAifType
  hh3cEOCComUniVLANType INTEGER
  hh3cEOCComUniPvid Integer32
  hh3cEOCComUniVlanTag INTEGER
  hh3cEOCComUniPriority Integer32
  hh3cEOCComUniUpLineRate Unsigned32
  hh3cEOCComUniDownLineRate Unsigned32
  hh3cEOCComUniAdminStatus INTEGER

Hh3cEOCComUniCountEntry  
SEQUENCE    
  hh3cEOCUniInPkts Unsigned32
  hh3cEOCUniInUPkts Unsigned32
  hh3cEOCUniInBPkts Unsigned32
  hh3cEOCUniInMPkts Unsigned32
  hh3cEOCUniInPausePkts Unsigned32
  hh3cEOCUniInTotalErrors Unsigned32
  hh3cEOCUniInCRCErrs Unsigned32
  hh3cEOCUniInUndersizePkts Unsigned32
  hh3cEOCUniInOversizePkts Unsigned32
  hh3cEOCUniInErrorbyOther Unsigned32
  hh3cEOCUniInOctets Unsigned32
  hh3cEOCUniOutPkts Unsigned32
  hh3cEOCUniOutUPkts Unsigned32
  hh3cEOCUniOutBPkts Unsigned32
  hh3cEOCUniOutMPkts Unsigned32
  hh3cEOCUniOutPausePkts Unsigned32
  hh3cEOCUniOutTotalErrors Unsigned32
  hh3cEOCUniOutCollisions Unsigned32
  hh3cEOCUniOutDelayExceedDsds Unsigned32
  hh3cEOCUniOutErrorbyOther Unsigned32
  hh3cEOCUniOutDroppedFrames Unsigned32
  hh3cEOCUniOutOctets Unsigned32

Hh3cEOCComCnuTypeEntry  
SEQUENCE    
  hh3cEOCComCnuTypeIdx Unsigned32
  hh3cEOCComCnuDescripton DisplayString

Hh3cEOCComCnuNumEntry  
SEQUENCE    
  hh3cEOCComCnuNumber Integer32

Defined Values

hh3cEOCCommon 1.3.6.1.4.1.25506.2.83
The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification.
MODULE-IDENTITY    

hh3cEOCCommonSysMan 1.3.6.1.4.1.25506.2.83.1
OBJECT IDENTIFIER    

hh3cEOCCommonSysScalarObjects 1.3.6.1.4.1.25506.2.83.1.1
OBJECT IDENTIFIER    

hh3cEOCCommonSysVersion 1.3.6.1.4.1.25506.2.83.1.1.1
Eoc version. If the object length is zero, it means the version is unknown. The length is up to 1024.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cEOCCommonUpLinkMacAddress 1.3.6.1.4.1.25506.2.83.1.1.2
EOC CLT's uplink device's mac address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hh3cEOCCommonCltMan 1.3.6.1.4.1.25506.2.83.2
OBJECT IDENTIFIER    

hh3cEOCCommonCltManTable 1.3.6.1.4.1.25506.2.83.2.1
This table defines the primary parameters of the CLT configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCCommonCltManEntry

hh3cEOCCommonCltManEntry 1.3.6.1.4.1.25506.2.83.2.1.1
The entry of the table hh3cEOCCommonCltManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCCommonCltManEntry  

hh3cEOCCommonCltAutoAuthorize 1.3.6.1.4.1.25506.2.83.2.1.1.1
This value determines whether software performs self-authorization for each Cable Network Unit(CNU) registering to the network. Setting it to false means for every CNU registering, software requires external authorization, and until it's done the CNU is not authenticated. True value means software authorizes each CNU registering to the network automatically.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cEOCCommonCltMaxAllowToAccess 1.3.6.1.4.1.25506.2.83.2.1.1.2
This value determines how many CNU can be bound in this CLT. If the number of CNU is more than this value , then the rest of CNU should not be allow to access.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuMan 1.3.6.1.4.1.25506.2.83.3
OBJECT IDENTIFIER    

hh3cEOCComCnuScalarObjects 1.3.6.1.4.1.25506.2.83.3.1
OBJECT IDENTIFIER    

hh3cEOCComCnuMaxDownBWMinVal 1.3.6.1.4.1.25506.2.83.3.1.1
The lower limit of total-bandwidth which is confined to hh3cEOCComCnuMaxDownBW.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuMaxDownBWMaxVal 1.3.6.1.4.1.25506.2.83.3.1.2
The upper limit of total-bandwidth which is confined to hh3cEOCComCnuMaxDownBW.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuSlaHighPriBWMinVal 1.3.6.1.4.1.25506.2.83.3.1.3
The lower limit of high priority bandwidth which is confined to hh3cEOCComCnuSlaHighPriBW.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuSlaHighPriBWMaxVal 1.3.6.1.4.1.25506.2.83.3.1.4
The upper limit of high priority bandwidth which is confined to hh3cEOCComCnuSlaHighPriBW.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuMaxUpBWMinVal 1.3.6.1.4.1.25506.2.83.3.1.5
The lower limit of total-bandwidth which is confined to hh3cEOCComCnuMaxUpBW.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuMaxUpBWMaxVal 1.3.6.1.4.1.25506.2.83.3.1.6
The upper limit of total-bandwidth which is confined to hh3cEOCComCnuMaxUpBW.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuAttenThrA 1.3.6.1.4.1.25506.2.83.3.1.7
The value of cnu's average attenuation good level thresholds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuAttenThrB 1.3.6.1.4.1.25506.2.83.3.1.8
The value of cnu's average attenuation normal level thresholds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuRateDropThr 1.3.6.1.4.1.25506.2.83.3.1.9
The value of cnu's Tx/Rx rate drop thresholds.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuSysManTable 1.3.6.1.4.1.25506.2.83.3.2
This table implements the management of CNUs(Coax Network Unit).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCComCnuSysManEntry

hh3cEOCComCnuSysManEntry 1.3.6.1.4.1.25506.2.83.3.2.1
The entry of the table hh3cEOCComCnuSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCComCnuSysManEntry  

hh3cEOCComCnuCableIfindex 1.3.6.1.4.1.25506.2.83.3.2.1.1
The index of cable port which uniquely identifies the cable port of one device.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuDeviceType 1.3.6.1.4.1.25506.2.83.3.2.1.2
The type of the EOC CNU(Coax Network Unit).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hh3cEOCComCnuDeviceAlias 1.3.6.1.4.1.25506.2.83.3.2.1.3
EOC CNU's alias which display as the device's name, it's recommended to set it uniquely and understandably.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hh3cEOCComCnuDescr 1.3.6.1.4.1.25506.2.83.3.2.1.4
User's description, including user's address, name, telephone number and so on.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hh3cEOCComCnuUpTime 1.3.6.1.4.1.25506.2.83.3.2.1.5
The time since the CNU last registered to the network.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

hh3cEOCComCnuVLANType 1.3.6.1.4.1.25506.2.83.3.2.1.6
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vLANTrunk(1), access(2), hybrid(3), fabric(4)  

hh3cEOCComCnuPvid 1.3.6.1.4.1.25506.2.83.3.2.1.7
The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on cable interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

hh3cEOCComCnuVlanTag 1.3.6.1.4.1.25506.2.83.3.2.1.8
VLAN is set tagged or untagged on cable interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tagged(1), untagged(2)  

hh3cEOCComCnuReset 1.3.6.1.4.1.25506.2.83.3.2.1.9
This variable is used to reset the CNU device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the CNU device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER running(1), reset(2)  

hh3cEOCComCnuDeregister 1.3.6.1.4.1.25506.2.83.3.2.1.10
deregister CNU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER deregister(1)  

hh3cEOCComCnuSave 1.3.6.1.4.1.25506.2.83.3.2.1.11
Save the UNI and CNU related configurations to the CNU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER save(1), running(2)  

hh3cEOCComCnuAccess 1.3.6.1.4.1.25506.2.83.3.2.1.12
Control whether the user can access to the network.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER access(1), notaccess(2)  

hh3cEOCComCnuMacTable 1.3.6.1.4.1.25506.2.83.3.3
This table implements the management of CNUs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCComCnuMacEntry

hh3cEOCComCnuMacEntry 1.3.6.1.4.1.25506.2.83.3.3.1
The entry of the table hh3cEOCComCnuMacTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCComCnuMacEntry  

hh3cEOCComCnuMacAddress 1.3.6.1.4.1.25506.2.83.3.3.1.1
EOC CNU's MAC address.
Status: current Access: read-create
OBJECT-TYPE    
  MacAddress  

hh3cEOCComCnuRowStatus 1.3.6.1.4.1.25506.2.83.3.3.1.2
Operation status.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cEOCComCnuTempIndex 1.3.6.1.4.1.25506.2.83.3.3.1.3
EOC CNU's model index from hh3cHPEOCTemplateIndex, If configure 0, the CNU select no model.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuInfoTable 1.3.6.1.4.1.25506.2.83.3.4
Primary status of the specified CNU. There will be one row in this table for each information in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCComCnuInfoEntry

hh3cEOCComCnuInfoEntry 1.3.6.1.4.1.25506.2.83.3.4.1
The entry of the hh3cEOCComCnuInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCComCnuInfoEntry  

hh3cEOCComCnuHardwareVersion 1.3.6.1.4.1.25506.2.83.3.4.1.1
EOC CNU's hardware version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hh3cEOCComCnuPCBVersion 1.3.6.1.4.1.25506.2.83.3.4.1.2
EOC CNU's PCB version.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cEOCComCnuLinkState 1.3.6.1.4.1.25506.2.83.3.4.1.3
The cable port's link state. The physicaldown(1) state indicates that the CNU is not powered on. The linkdown(2) state indicates that the CNU is powered on, but registers fail. The linkup(3) state indicates that the CNU is powered on, and registers successful. The loopback(4) state indecates that the CNU is powered on and registers successful, but loopback has detected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER physicaldown(1), linkdown(2), linkup(3), loopback(4)  

hh3cEOCComCnuAttenuation 1.3.6.1.4.1.25506.2.83.3.4.1.4
The cnu's average attenuation.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuSoftwareVersion 1.3.6.1.4.1.25506.2.83.3.4.1.5
EOC CNU's software version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hh3cEOCComCnuTxRate 1.3.6.1.4.1.25506.2.83.3.4.1.6
The cnu's capability of tx speed in unit of 1Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuRxRate 1.3.6.1.4.1.25506.2.83.3.4.1.7
The cnu's capability of rx speed in unit of 1Mbps.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuTxRateDrop 1.3.6.1.4.1.25506.2.83.3.4.1.8
The cnu's capability droping of tx speed from it's history max value in unit of %.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuRxRateDrop 1.3.6.1.4.1.25506.2.83.3.4.1.9
The cnu's capability droping of rx speed from it's history max value in unit of %.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuBandWidthTable 1.3.6.1.4.1.25506.2.83.3.5
Set bandwidth parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCComCnuBandWidthEntry

hh3cEOCComCnuBandWidthEntry 1.3.6.1.4.1.25506.2.83.3.5.1
The entry of table hh3cEOCComCnuBandWidthTable. It is a pre-configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCComCnuBandWidthEntry  

hh3cEOCComCnuMaxDownBW 1.3.6.1.4.1.25506.2.83.3.5.1.1
Maximum bandwidth allowed for the CNU, measured in Kbit/s.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuSlaHighPriBW 1.3.6.1.4.1.25506.2.83.3.5.1.2
High priority bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cEOCComCnuMaxUpBW. The high priority bandwidth should not be larger than the maximum bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEOCComCnuMaxUpBW 1.3.6.1.4.1.25506.2.83.3.5.1.3
Total bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cEOCComCnuSlaHighPriBW. The total bandwidth should be larger than the high priority bandwidth.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cEOCComUniMan 1.3.6.1.4.1.25506.2.83.4
OBJECT IDENTIFIER    

hh3cEOCComUniManTable 1.3.6.1.4.1.25506.2.83.4.1
This table defines several user network interface(UNI) system parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCComUniManEntry

hh3cEOCComUniManEntry 1.3.6.1.4.1.25506.2.83.4.1.1
The entry of hh3cEOCComUniManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCComUniManEntry  

hh3cEOCUniIndex 1.3.6.1.4.1.25506.2.83.4.1.1.1
The index value which uniquely identifies the FE(Fast Ethernet) interface of the CNU.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hh3cEOCComUniDescr 1.3.6.1.4.1.25506.2.83.4.1.1.2
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hh3cEOCComUniStatus 1.3.6.1.4.1.25506.2.83.4.1.1.3
The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down state. The testing state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, hh3cEOCComUniStatus is then changed to either the up or testing states (or remains in the down state).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

hh3cEOCComUniSpeed 1.3.6.1.4.1.25506.2.83.4.1.1.4
User network interface speed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), s10M(10), s100M(100)  

hh3cEOCComUniDuplex 1.3.6.1.4.1.25506.2.83.4.1.1.5
User network interface mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(1), half(2), auto(3)  

hh3cEOCComUniCurrentSpeed 1.3.6.1.4.1.25506.2.83.4.1.1.6
An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

hh3cEOCComUniCurrentDuplex 1.3.6.1.4.1.25506.2.83.4.1.1.7
The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER full(1), half(2), unknown(3)  

hh3cEOCComUniMdi 1.3.6.1.4.1.25506.2.83.4.1.1.8
Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mdi-ii(1), mdi-x(2), mdi-auto(3)  

hh3cEOCComUniFlowControl 1.3.6.1.4.1.25506.2.83.4.1.1.9
Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cEOCComUniCountReset 1.3.6.1.4.1.25506.2.83.4.1.1.10
Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER reset(1)  

hh3cEOCComUniAlias 1.3.6.1.4.1.25506.2.83.4.1.1.11
This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first instantiation of an interface, the value of hh3cEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of hh3cEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the hh3cEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and hh3cEOCUniIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of hh3cEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

hh3cEOCComUniType 1.3.6.1.4.1.25506.2.83.4.1.1.12
The type of interface. Additional values for hh3cEOCComUniType are assigned by the Internet Assigned Numbers Authority(IANA), through updating the syntax of the IANAifType textual convention.
Status: current Access: read-only
OBJECT-TYPE    
  IANAifType  

hh3cEOCComUniVLANType 1.3.6.1.4.1.25506.2.83.4.1.1.13
port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vLANTrunk(1), access(2), hybrid(3), fabric(4)  

hh3cEOCComUniPvid 1.3.6.1.4.1.25506.2.83.4.1.1.14
The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..4094  

hh3cEOCComUniVlanTag 1.3.6.1.4.1.25506.2.83.4.1.1.15
VLAN is set tagged or untagged.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tagged(1), untagged(2)  

hh3cEOCComUniPriority 1.3.6.1.4.1.25506.2.83.4.1.1.16
The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

hh3cEOCComUniUpLineRate 1.3.6.1.4.1.25506.2.83.4.1.1.17
The max speed upload in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hh3cEOCComUniDownLineRate 1.3.6.1.4.1.25506.2.83.4.1.1.18
The max speed download in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the download speed is only restricted by the physical line.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hh3cEOCComUniAdminStatus 1.3.6.1.4.1.25506.2.83.4.1.1.19
Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2)  

hh3cEOCComUniCountTable 1.3.6.1.4.1.25506.2.83.4.2
A list of interface counter about frames entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCComUniCountEntry

hh3cEOCComUniCountEntry 1.3.6.1.4.1.25506.2.83.4.2.1
An entry containing management information applicable to a particular interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCComUniCountEntry  

hh3cEOCUniInPkts 1.3.6.1.4.1.25506.2.83.4.2.1.1
The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInUPkts 1.3.6.1.4.1.25506.2.83.4.2.1.2
The total number of good packets received that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInBPkts 1.3.6.1.4.1.25506.2.83.4.2.1.3
The total number of good packets received that are directed to the broadcast address. Note that this does not include multicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInMPkts 1.3.6.1.4.1.25506.2.83.4.2.1.4
The total number of good packets received that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInPausePkts 1.3.6.1.4.1.25506.2.83.4.2.1.5
A count of MAC Control packets received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInTotalErrors 1.3.6.1.4.1.25506.2.83.4.2.1.6
Total count of the error packets received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInCRCErrs 1.3.6.1.4.1.25506.2.83.4.2.1.7
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInUndersizePkts 1.3.6.1.4.1.25506.2.83.4.2.1.8
The total number of packets received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInOversizePkts 1.3.6.1.4.1.25506.2.83.4.2.1.9
The total number of packets received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInErrorbyOther 1.3.6.1.4.1.25506.2.83.4.2.1.10
The total number of other error packets received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniInOctets 1.3.6.1.4.1.25506.2.83.4.2.1.11
The total number of octets received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutPkts 1.3.6.1.4.1.25506.2.83.4.2.1.12
The total number of packets (including bad packets, broadcast packets, and multicast packets) sent.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutUPkts 1.3.6.1.4.1.25506.2.83.4.2.1.13
The total number of good packets sent that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutBPkts 1.3.6.1.4.1.25506.2.83.4.2.1.14
The total number of good packets sent that are directed to the broadcast address. Note that this does not include multicast packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutMPkts 1.3.6.1.4.1.25506.2.83.4.2.1.15
The total number of good packets sent that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutPausePkts 1.3.6.1.4.1.25506.2.83.4.2.1.16
The total number of MAC control packets sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutTotalErrors 1.3.6.1.4.1.25506.2.83.4.2.1.17
The total number of error packets sent on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutCollisions 1.3.6.1.4.1.25506.2.83.4.2.1.18
The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutDelayExceedDsds 1.3.6.1.4.1.25506.2.83.4.2.1.19
The number of packets discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutErrorbyOther 1.3.6.1.4.1.25506.2.83.4.2.1.20
The total number of other error packets sent on this interface. Other error packets means the error packets out of collision packets and excessive delayed packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutDroppedFrames 1.3.6.1.4.1.25506.2.83.4.2.1.21
The total number of frames dropped because of buffer failure.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCUniOutOctets 1.3.6.1.4.1.25506.2.83.4.2.1.22
The total number of octets transmitted out of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

hh3cEOCCommonTrap 1.3.6.1.4.1.25506.2.83.5
OBJECT IDENTIFIER    

hh3cEOCTrapPrefix 1.3.6.1.4.1.25506.2.83.5.0
OBJECT IDENTIFIER    

hh3cEOCCnuRegExcessTrap 1.3.6.1.4.1.25506.2.83.5.0.1
A hh3cEOCCnuRegExcessTrap notification is sent when the number of registered CNUs exceeds the limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuRegExcessRecoverTrap 1.3.6.1.4.1.25506.2.83.5.0.2
A hh3cEOCCnuRegExcessRecoverTrap notification is sent when hh3cEOCCnuRegExcessTrap is detected and then recoverd.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuRegSuccTrap 1.3.6.1.4.1.25506.2.83.5.0.3
A hh3cEOCCnuRegSuccTrap notification is sent when a CNU registers successful.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuOffLineTrap 1.3.6.1.4.1.25506.2.83.5.0.4
A hh3cEOCCnuOffLineTrap notification is sent when a CNU offline.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuLinkupTrap 1.3.6.1.4.1.25506.2.83.5.0.5
A hh3cEOCCnuLinkupTrap notification is sent when a CNU linkup.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCOamDisconnectTrap 1.3.6.1.4.1.25506.2.83.5.0.6
A hh3cEOCOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCOamDisconnectRecoverTrap 1.3.6.1.4.1.25506.2.83.5.0.7
A hh3cEOCOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCBandwidthNotEnoughTrap 1.3.6.1.4.1.25506.2.83.5.0.8
Bandwidth is not enough, cnu can not bind now.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuAttenuationTrap 1.3.6.1.4.1.25506.2.83.5.0.9
A hh3cHPEOCCnuAttenuationTrap notification is sent when a CNU's attenuation is changing.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuRegFailTrap 1.3.6.1.4.1.25506.2.83.5.0.10
A hh3cEOCCnuRegFailTrap notification is sent when a CNU registers fail.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCLTCablePortErrorTrap 1.3.6.1.4.1.25506.2.83.5.0.11
A hh3cEOCCLTCablePortErrorTrap notification is sent when the hardware of cable port occurs error or CLT's vlan is configged error.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCLTCablePortErrReTrap 1.3.6.1.4.1.25506.2.83.5.0.12
A hh3cEOCCLTCablePortErrReTrap notification is sent when cable port error and then recovered.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuTxRateDropTrap 1.3.6.1.4.1.25506.2.83.5.0.13
A hh3cEOCCnuTxRateDropTrap notification is sent when cable port rate of TX capability drop exceeded threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuTxRateDropRecoverTrap 1.3.6.1.4.1.25506.2.83.5.0.14
A hh3cEOCCnuTxRateDropRecoverTrap notification is sent when cable port rate of TX capability recover from the recent rate-drop trap.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuRxRateDropTrap 1.3.6.1.4.1.25506.2.83.5.0.15
A hh3cEOCCnuRxRateDropTrap notification is sent when cable port rate of RX capability drop exceeded threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuRxRateDropRecoverTrap 1.3.6.1.4.1.25506.2.83.5.0.16
A hh3cEOCCnuRxRateDropRecoverTrap notification is sent when cable port rate of RX capability recover from the recent rate-drop trap.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuFWDownLoadErrTrap 1.3.6.1.4.1.25506.2.83.5.0.17
A hh3cEOCCnuFWDownLoadErrTrap notification is sent when CLT can't download CNU firmware from the server successfully.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuFWDownLoadErrReTrap 1.3.6.1.4.1.25506.2.83.5.0.18
A hh3cEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover from the download CNU firmware error.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuDeviceTypeErrTrap 1.3.6.1.4.1.25506.2.83.5.0.19
A hh3cEOCCnuDeviceTypeErrTrap notification is sent when the online CNU doesn't match the type which user defined earlier.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuDeviceTypeErrReTrap 1.3.6.1.4.1.25506.2.83.5.0.20
A hh3cEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU doesn't match the type which user defined earlier and then recover.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuAutoUpdateErrTrap 1.3.6.1.4.1.25506.2.83.5.0.21
A hh3cEOCCnuAutoUpdateErrTrap notification is sent when the online CNU doesn't auto update successfully.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCCnuAutoUpdateSuccTrap 1.3.6.1.4.1.25506.2.83.5.0.22
A hh3cEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU auto update successfully.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCLoopbackDetectTrap 1.3.6.1.4.1.25506.2.83.5.0.23
A hh3cEOCLoopbackDetectTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is found.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCLoopbackRecoverTrap 1.3.6.1.4.1.25506.2.83.5.0.24
A hh3cEOCLoopbackRecoverTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is recover.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cEOCComOnLineCnuMan 1.3.6.1.4.1.25506.2.83.6
OBJECT IDENTIFIER    

hh3cEOCComCnuTypeTable 1.3.6.1.4.1.25506.2.83.6.1
This table defines the description of cnu typ.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCComCnuTypeEntry

hh3cEOCComCnuTypeEntry 1.3.6.1.4.1.25506.2.83.6.1.1
The entry of the table hh3cEOCComCnuTypeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCComCnuTypeEntry  

hh3cEOCComCnuTypeIdx 1.3.6.1.4.1.25506.2.83.6.1.1.1
A unique value for each cnu types. Its value ranges between 1 and the value of cny typess.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hh3cEOCComCnuDescripton 1.3.6.1.4.1.25506.2.83.6.1.1.2
The description for unique cnu types.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

hh3cEOCComCnuNumTable 1.3.6.1.4.1.25506.2.83.6.2
This table defines the number of cnu registered in variable types of the CLT .
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cEOCComCnuNumEntry

hh3cEOCComCnuNumEntry 1.3.6.1.4.1.25506.2.83.6.2.1
The entry of the table hh3cEOCComCnuNumTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cEOCComCnuNumEntry  

hh3cEOCComCnuNumber 1.3.6.1.4.1.25506.2.83.6.2.1.1
The number of special type of cnu that has been registerd in clt.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32