HH3C-DSP-MIB

File: HH3C-DSP-MIB.mib (8767 bytes)

Imported modules

HH3C-OID-MIB ENTITY-MIB SNMPv2-SMI

Imported symbols

hh3cCommon PhysicalIndex OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE Integer32
TimeTicks

Defined Types

Hh3cVPMStatusEntry  
SEQUENCE    
  hh3cVPMIndex Integer32
  hh3cVPMEnPhysicalIndex PhysicalIndex
  hh3cVPMState INTEGER
  hh3cVPMResourceUtilization Integer32
  hh3cVPMHiWaterUtilization Integer32
  hh3cVPMMaxChannel Integer32

Hh3cDSPStatusEntry  
SEQUENCE    
  hh3cDSPIndex Integer32
  hh3cDSPVPMIndex Integer32
  hh3cDSPEnPhysicalIndex PhysicalIndex
  hh3cDSPResetTime TimeTicks
  hh3cDSPMaxChannel Integer32
  hh3cDSPState INTEGER
  hh3cDSPInUseChannel Integer32

Defined Values

hh3cDSP 1.3.6.1.4.1.25506.2.89
This MIB is to provide the definition of the DSP(Digital Signal Processing) status.
MODULE-IDENTITY    

hh3cVPMStatusTable 1.3.6.1.4.1.25506.2.89.1
The table contains status parameters of VPM(Voice Process Module) card.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cVPMStatusEntry

hh3cVPMStatusEntry 1.3.6.1.4.1.25506.2.89.1.1
The entry of VPM status table.
OBJECT-TYPE    
  Hh3cVPMStatusEntry  

hh3cVPMIndex 1.3.6.1.4.1.25506.2.89.1.1.1
The index for this entry. The sequence of VPM card in the chassis is from the top to bottom.
OBJECT-TYPE    
  Integer32 1..64  

hh3cVPMEnPhysicalIndex 1.3.6.1.4.1.25506.2.89.1.1.2
The object corresponds to PhysicalIndex in the chassis.
OBJECT-TYPE    
  PhysicalIndex  

hh3cVPMState 1.3.6.1.4.1.25506.2.89.1.1.3
The object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), fatal(3), offLine(4)  

hh3cVPMResourceUtilization 1.3.6.1.4.1.25506.2.89.1.1.4
The object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources.
OBJECT-TYPE    
  Integer32 0..100  

hh3cVPMHiWaterUtilization 1.3.6.1.4.1.25506.2.89.1.1.5
The object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.
OBJECT-TYPE    
  Integer32 0..100  

hh3cVPMMaxChannel 1.3.6.1.4.1.25506.2.89.1.1.6
The maximum number of channels can be supported in each VPM card.
OBJECT-TYPE    
  Integer32  

hh3cDSPStatusTable 1.3.6.1.4.1.25506.2.89.2
The table contains status parameters of DSP(Digital Signal Processing) card.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDSPStatusEntry

hh3cDSPStatusEntry 1.3.6.1.4.1.25506.2.89.2.1
The entry of DSP status table.
OBJECT-TYPE    
  Hh3cDSPStatusEntry  

hh3cDSPIndex 1.3.6.1.4.1.25506.2.89.2.1.1
The index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.
OBJECT-TYPE    
  Integer32 1..256  

hh3cDSPVPMIndex 1.3.6.1.4.1.25506.2.89.2.1.2
The object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card.
OBJECT-TYPE    
  Integer32 0..64  

hh3cDSPEnPhysicalIndex 1.3.6.1.4.1.25506.2.89.2.1.3
The object corresponds to PhysicalIndex in the chassis.
OBJECT-TYPE    
  PhysicalIndex  

hh3cDSPResetTime 1.3.6.1.4.1.25506.2.89.2.1.4
The value of sysUpTime from the last DSP reset occurred.
OBJECT-TYPE    
  TimeTicks  

hh3cDSPMaxChannel 1.3.6.1.4.1.25506.2.89.2.1.5
The maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.
OBJECT-TYPE    
  Integer32  

hh3cDSPState 1.3.6.1.4.1.25506.2.89.2.1.6
The object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state.
OBJECT-TYPE    
  INTEGER normal(1), fatal(3), offLine(4)  

hh3cDSPInUseChannel 1.3.6.1.4.1.25506.2.89.2.1.7
The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection.
OBJECT-TYPE    
  Integer32  

hh3cDSPTrap 1.3.6.1.4.1.25506.2.89.3
OBJECT IDENTIFIER    

hh3cDSPTrapPrex 1.3.6.1.4.1.25506.2.89.3.0
OBJECT IDENTIFIER    

hh3cVPMStateChange 1.3.6.1.4.1.25506.2.89.3.0.1
This trap is sent when VPM state changes.
NOTIFICATION-TYPE    

hh3cDSPStateChange 1.3.6.1.4.1.25506.2.89.3.0.2
This trap is sent when DSP state changes.
NOTIFICATION-TYPE