HH3C-DOT11-RRM-MIB

File: HH3C-DOT11-RRM-MIB.mib (45852 bytes)

Imported modules

HH3C-DOT11-REF-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

Hh3cDot11RadioType Hh3cDot11ChannelScopeType Hh3cDot11RadioElementIndex
Hh3cDot11RadioScopeType hh3cDot11APElementIndex Integer32
Unsigned32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE TruthValue MacAddress
DateAndTime RowStatus hh3cDot11
Hh3cDot11ObjectIDType Hh3cDot11SSIDStringType

Defined Types

Hh3cDot11RRMRadioCfgEntry  
SEQUENCE    
  hh3cDot11RRMRadioType Hh3cDot11RadioType
  hh3cDot11RRMCfgChlState TruthValue
  hh3cDot11RRMCfgChlMode INTEGER
  hh3cDot11RRMChlProntoRadioElmt Unsigned32
  hh3cDot11RRMCfgPwrState TruthValue
  hh3cDot11RRMCfgPwrMode INTEGER
  hh3cDot11RRMPwrProntoRadioElmt Unsigned32
  hh3cDot11RRMCfgIntrvl Integer32
  hh3cDot11RRMCfgIntrfThres Integer32
  hh3cDot11RRMCfgNoiseThres Integer32
  hh3cDot11RRMCfgPERThres Integer32
  hh3cDot11RRMCfgToleranceFctr Integer32
  hh3cDot11RRMCfgAdjacencyFctr Integer32

Hh3cDot11RRMAPCfgEntry  
SEQUENCE    
  hh3cDot11RRMAPWorkMode INTEGER

Hh3cDot11RRMSDRadioGroupEntry  
SEQUENCE    
  hh3cDot11RRMSDRadioGroupId Unsigned32
  hh3cDot11RRMSDRadioGroupDesc OCTET STRING
  hh3cDot11RRMSDRdGrpChlHolddownTm Unsigned32
  hh3cDot11RRMSDRdGrpPwrHolddownTm Unsigned32
  hh3cDot11RRMSDRdGroupRowStatus RowStatus

Hh3cDot11RRMAPCfg2Entry  
SEQUENCE    
  hh3cDot11RRMAPSerialID Hh3cDot11ObjectIDType
  hh3cDot11RRMAPIntfThreshold Integer32
  hh3cDot11RRMStaIntfThreshold Integer32
  hh3cDot11RRMCoChlIntfTrapThhd Integer32
  hh3cDot11RRMAdjChlIntfTrapThhd Integer32

Hh3cDot11RRMChlRptEntry  
SEQUENCE    
  hh3cDot11RRMRadioIndex Hh3cDot11RadioElementIndex
  hh3cDot11RRMChlRptChlNum Integer32
  hh3cDot11RRMChlRptChlType INTEGER
  hh3cDot11RRMChlRptChlQlty INTEGER
  hh3cDot11RRMChlRptNbrCnt Integer32
  hh3cDot11RRMChlRptLoad Integer32
  hh3cDot11RRMChlRptUtlz Integer32
  hh3cDot11RRMChlRptIntrf Integer32
  hh3cDot11RRMChlRptPER Integer32
  hh3cDot11RRMChlRptRetryRate Integer32
  hh3cDot11RRMChlRptNoise Integer32
  hh3cDot11RRMChlRptRadarIndtcr INTEGER

Hh3cDot11RRMNbrInfoEntry  
SEQUENCE    
  hh3cDot11RrmNbrBSSID MacAddress
  hh3cDot11RrmNbrChl Hh3cDot11ChannelScopeType
  hh3cDot11RRMNbrIntrf Integer32
  hh3cDot11RrmNbrRSSI Integer32
  hh3cDot11RrmNbrType INTEGER
  hh3cDot11RrmNbrSSID Hh3cDot11SSIDStringType

Hh3cDot11RRMHistoryEntry  
SEQUENCE    
  hh3cDot11RRMHistoryId Integer32
  hh3cDot11RRMHistoryRecIndctr INTEGER
  hh3cDot11RRMHistoryChl Hh3cDot11ChannelScopeType
  hh3cDot11RRMHistoryPwr Integer32
  hh3cDot11RRMHistoryLoad Integer32
  hh3cDot11RRMHistoryUtlz Integer32
  hh3cDot11RRMHistoryIntrf Integer32
  hh3cDot11RRMHistoryNoise Integer32
  hh3cDot11RRMHistoryPER Integer32
  hh3cDot11RRMHistoryRetryRate Integer32
  hh3cDot11RRMHistoryChgReason BITS
  hh3cDot11RRMHistoryChgDateTime DateAndTime

Hh3cDot11RRMRadioNbrInfoEntry  
SEQUENCE    
  hh3cDot11RRMRadioNbrAPID Hh3cDot11ObjectIDType
  hh3cDot11RRMRadioNbrRadioID Hh3cDot11RadioScopeType
  hh3cDot11RRMRadioNbrSSID OCTET STRING

Hh3cDot11MonitorDetectedDevEntry  
SEQUENCE    
  hh3cDot11MonitorDevMAC MacAddress
  hh3cDot11MonitorDevType INTEGER
  hh3cDot11MonitorDevVendor OCTET STRING
  hh3cDot11MonitorDevSSID OCTET STRING
  hh3cDot11MonitorDevBSSID MacAddress
  hh3cDot11MonitorDevChannel Hh3cDot11ChannelScopeType
  hh3cDot11MonitorRadioId Hh3cDot11RadioScopeType
  hh3cDot11MonitorDevMaxRSSI Integer32
  hh3cDot11MonitorDevBeaconIntvl Integer32
  hh3cDot11MonitorDevFstDctTime DateAndTime
  hh3cDot11MonitorDevLstDctTime DateAndTime
  hh3cDot11MonitorDevClear TruthValue
  hh3cDot11MonitorDevSNR Integer32

Defined Values

hh3cDot11RRM 1.3.6.1.4.1.25506.2.75.8
This MIB file is to provide the object definition of WLAN radio resource management (RRM).
MODULE-IDENTITY    

hh3cDot11RRMConfigGroup 1.3.6.1.4.1.25506.2.75.8.1
OBJECT IDENTIFIER    

hh3cDot11RRMGlobalCfgPara 1.3.6.1.4.1.25506.2.75.8.1.1
OBJECT IDENTIFIER    

hh3cDot11RRM11nMadtMaxMcs 1.3.6.1.4.1.25506.2.75.8.1.1.1
Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..76 | 255  

hh3cDot11RRM11nSuptMaxMcs 1.3.6.1.4.1.25506.2.75.8.1.1.2
Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..76  

hh3cDot11RRM11gProtect 1.3.6.1.4.1.25506.2.75.8.1.1.3
Enable/Disable dot11g protection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cDot11RRM11aPwrConstrt 1.3.6.1.4.1.25506.2.75.8.1.1.4
Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER is defined by the regulatory domain).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cDot11RRM11aSpectrumManag 1.3.6.1.4.1.25506.2.75.8.1.1.5
Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints applicable to all devices in the BSS based on regulatory domain specification.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cDot11RRMAutoChlAvoid11h 1.3.6.1.4.1.25506.2.75.8.1.1.6
Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of them is selected.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cDot11RRMScanChl 1.3.6.1.4.1.25506.2.75.8.1.1.7
Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band are scanned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), all(2)  

hh3cDot11RRMScanRptIntvel 1.3.6.1.4.1.25506.2.75.8.1.1.8
Set the scan report interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..120  

hh3cDot11APInterfNumThreshhd 1.3.6.1.4.1.25506.2.75.8.1.1.9
Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interference trap will be sent immediately.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cDot11StaInterfNumThreshhd 1.3.6.1.4.1.25506.2.75.8.1.1.10
Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA interference trap will be sent immediately.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cDot11RRM11nMultiCastMcs 1.3.6.1.4.1.25506.2.75.8.1.1.11
Specify the modulation and coding scheme (MCS) index for 802.11n multicast rates. The value 4294967295 indicates that no MCS index is specified. No MCS index is specified for 802.11n multicast rates by default. Besides 4294967295, the specified MCS index for 802.11n multicast rates must be no less than the specified maximum MCS index for 802.11n mandatory rates. Before configure the MCS index for 802.11n multicast rates, the maximum MCS index for 802.11n mandatory rates must be configured
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..76 | 4294967295  

hh3cDot11RRM11acMadtMaxNss 1.3.6.1.4.1.25506.2.75.8.1.1.12
Specify the maximum NSS index for 802.11ac mandatory rates. The value 0 indicates that no maximum NSS index is specified. No maximum NSS index is specified for 802.11ac mandatory rates by default. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8  

hh3cDot11RRM11acSuptMaxNss 1.3.6.1.4.1.25506.2.75.8.1.1.13
Specify the maximum NSS index for 802.11ac supported rates. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..8  

hh3cDot11RRM11acMultiCastNss 1.3.6.1.4.1.25506.2.75.8.1.1.14
Specify the NSS index for 802.11ac multicast rates. The value 0 indicates that no NSS index is specified. No NSS index is specified for 802.11ac multicast rates by default. The specified NSS index for 802.11ac multicast rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates. Before configuring the NSS index for 802.11ac multicast rates, the maximum NSS index for 802.11ac mandatory rates must be configured. Besides, it must be configured together with the node below.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..8  

hh3cDot11RRM11acMultiCastVhtMcs 1.3.6.1.4.1.25506.2.75.8.1.1.15
Specify the MCS index for 802.11ac multicast rates. The value 255 indicates that no MCS index is specified. No MCS index is specified for 802.11ac multicast rates by default. Besides, it must be configured together with the node above.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..9 | 255  

hh3cDot11RRMRadioCfgTable 1.3.6.1.4.1.25506.2.75.8.1.2
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RRMRadioCfgEntry

hh3cDot11RRMRadioCfgEntry 1.3.6.1.4.1.25506.2.75.8.1.2.1
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RRMRadioCfgEntry  

hh3cDot11RRMRadioType 1.3.6.1.4.1.25506.2.75.8.1.2.1.1
802.11 radio type.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RadioType  

hh3cDot11RRMCfgChlState 1.3.6.1.4.1.25506.2.75.8.1.2.1.2
Enable/Disable dynamic channel selection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cDot11RRMCfgChlMode 1.3.6.1.4.1.25506.2.75.8.1.2.1.3
Configure the mode of channel selection. This node can be configured only when dynamic channel selection is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER selfDecisive(1), userTriggered(2)  

hh3cDot11RRMChlProntoRadioElmt 1.3.6.1.4.1.25506.2.75.8.1.2.1.4
Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RRMCfgPwrState 1.3.6.1.4.1.25506.2.75.8.1.2.1.5
Enable/Disable dynamic power selection for the band.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cDot11RRMCfgPwrMode 1.3.6.1.4.1.25506.2.75.8.1.2.1.6
Configure the mode of transmit power control. This node can be configured only when dynamic power selection is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER selfDecisive(1), userTriggered(2)  

hh3cDot11RRMPwrProntoRadioElmt 1.3.6.1.4.1.25506.2.75.8.1.2.1.7
Specify the AP and radio that will change power at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of transmit power control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RRMCfgIntrvl 1.3.6.1.4.1.25506.2.75.8.1.2.1.8
Configure the calibration interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMCfgIntrfThres 1.3.6.1.4.1.25506.2.75.8.1.2.1.9
Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

hh3cDot11RRMCfgNoiseThres 1.3.6.1.4.1.25506.2.75.8.1.2.1.10
Configure the noise threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -127..127  

hh3cDot11RRMCfgPERThres 1.3.6.1.4.1.25506.2.75.8.1.2.1.11
Configure the CRC error threshold. If the percentage of CRC errors reaches the threshold, RRM will perform resource adjustment to control the situation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..100  

hh3cDot11RRMCfgToleranceFctr 1.3.6.1.4.1.25506.2.75.8.1.2.1.12
Configure the tolerance level. During dynamic frequency selection (DFS), the channel will be changed only if there is a better channel having lesser interference and packet error rate than those specified by the user.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..45  

hh3cDot11RRMCfgAdjacencyFctr 1.3.6.1.4.1.25506.2.75.8.1.2.1.13
Configure the adjacency factor for the band. If transmit power control (TPC) is configured, power will be adjusted when the nth neighbor is detected. The value n is the adjacency factor.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

hh3cDot11RRMAPCfgTable 1.3.6.1.4.1.25506.2.75.8.1.3
This table defines the RRM parameters for AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RRMAPCfgEntry

hh3cDot11RRMAPCfgEntry 1.3.6.1.4.1.25506.2.75.8.1.3.1
Each entry contains information of RRM parameters for AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RRMAPCfgEntry  

hh3cDot11RRMAPWorkMode 1.3.6.1.4.1.25506.2.75.8.1.3.1.1
AP work mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hh3cDot11RRMSDRadioGroupTable 1.3.6.1.4.1.25506.2.75.8.1.4
This table defines RRM self-decisive radio group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RRMSDRadioGroupEntry

hh3cDot11RRMSDRadioGroupEntry 1.3.6.1.4.1.25506.2.75.8.1.4.1
Each entry contains information of one RRM self-decisive radio group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RRMSDRadioGroupEntry  

hh3cDot11RRMSDRadioGroupId 1.3.6.1.4.1.25506.2.75.8.1.4.1.1
Represents RRM self-decisive radio group ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RRMSDRadioGroupDesc 1.3.6.1.4.1.25506.2.75.8.1.4.1.2
Represents the description of RRM self-decisive radio group.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

hh3cDot11RRMSDRdGrpChlHolddownTm 1.3.6.1.4.1.25506.2.75.8.1.4.1.3
Represents the channel holddown time of RRM self-decisive radio group.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RRMSDRdGrpPwrHolddownTm 1.3.6.1.4.1.25506.2.75.8.1.4.1.4
Represents the power holddown time of RRM self-decisive radio group.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RRMSDRdGroupRowStatus 1.3.6.1.4.1.25506.2.75.8.1.4.1.5
The row status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

hh3cDot11RRMAPCfg2Table 1.3.6.1.4.1.25506.2.75.8.1.5
This table defines the RRM parameters for AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RRMAPCfg2Entry

hh3cDot11RRMAPCfg2Entry 1.3.6.1.4.1.25506.2.75.8.1.5.1
Each entry contains information of RRM parameters for AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RRMAPCfg2Entry  

hh3cDot11RRMAPSerialID 1.3.6.1.4.1.25506.2.75.8.1.5.1.1
Serial ID of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11ObjectIDType  

hh3cDot11RRMAPIntfThreshold 1.3.6.1.4.1.25506.2.75.8.1.5.1.2
Represents threshold of AP interference . If the number of AP interference exceeds this threshold, AP interference trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMStaIntfThreshold 1.3.6.1.4.1.25506.2.75.8.1.5.1.3
Represents threshold of STA interference. If the number of STA interference exceeds this threshold, station interference trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMCoChlIntfTrapThhd 1.3.6.1.4.1.25506.2.75.8.1.5.1.4
Represents threshold of interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMAdjChlIntfTrapThhd 1.3.6.1.4.1.25506.2.75.8.1.5.1.5
Represents threshold of adjacent interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMDetectGroup 1.3.6.1.4.1.25506.2.75.8.2
OBJECT IDENTIFIER    

hh3cDot11RRMChlRptTable 1.3.6.1.4.1.25506.2.75.8.2.1
This table shows the RRM channel information of each radio on all APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RRMChlRptEntry

hh3cDot11RRMChlRptEntry 1.3.6.1.4.1.25506.2.75.8.2.1.1
Each entry contains information of RRM channel information of the radio on the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RRMChlRptEntry  

hh3cDot11RRMRadioIndex 1.3.6.1.4.1.25506.2.75.8.2.1.1.1
Represents index of the radio.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Hh3cDot11RadioElementIndex  

hh3cDot11RRMChlRptChlNum 1.3.6.1.4.1.25506.2.75.8.2.1.1.2
Channel number.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMChlRptChlType 1.3.6.1.4.1.25506.2.75.8.2.1.1.3
Channel type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER primeChannel(1), offChannel(2)  

hh3cDot11RRMChlRptChlQlty 1.3.6.1.4.1.25506.2.75.8.2.1.1.4
Channel quality.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(1), bad(2)  

hh3cDot11RRMChlRptNbrCnt 1.3.6.1.4.1.25506.2.75.8.2.1.1.5
Number of neighbors found on the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMChlRptLoad 1.3.6.1.4.1.25506.2.75.8.2.1.1.6
Load observed on the channel in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMChlRptUtlz 1.3.6.1.4.1.25506.2.75.8.2.1.1.7
Utilization of the channel in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMChlRptIntrf 1.3.6.1.4.1.25506.2.75.8.2.1.1.8
Interference observed on the channel in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMChlRptPER 1.3.6.1.4.1.25506.2.75.8.2.1.1.9
Packet error rate observed on the channel in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMChlRptRetryRate 1.3.6.1.4.1.25506.2.75.8.2.1.1.10
Percentage of retransmission happened on the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMChlRptNoise 1.3.6.1.4.1.25506.2.75.8.2.1.1.11
Noise observed on the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMChlRptRadarIndtcr 1.3.6.1.4.1.25506.2.75.8.2.1.1.12
Radar detection status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER detected(1), notDetected(2)  

hh3cDot11RRMNbrInfoTable 1.3.6.1.4.1.25506.2.75.8.2.2
This table shows the RRM neighbor information of each radio on all APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RRMNbrInfoEntry

hh3cDot11RRMNbrInfoEntry 1.3.6.1.4.1.25506.2.75.8.2.2.1
Each entry contains information of RRM neighbor information of the radio on an AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RRMNbrInfoEntry  

hh3cDot11RrmNbrBSSID 1.3.6.1.4.1.25506.2.75.8.2.2.1.1
MAC address of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hh3cDot11RrmNbrChl 1.3.6.1.4.1.25506.2.75.8.2.2.1.2
Channel number on which the neighbor was found.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cDot11ChannelScopeType  

hh3cDot11RRMNbrIntrf 1.3.6.1.4.1.25506.2.75.8.2.2.1.3
Interference observed on the channel in percentage by neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RrmNbrRSSI 1.3.6.1.4.1.25506.2.75.8.2.2.1.4
Signal strength of the AP in dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11RrmNbrType 1.3.6.1.4.1.25506.2.75.8.2.2.1.5
Type of the AP, managed or unmanaged.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER managed(1), unmanaged(2)  

hh3cDot11RrmNbrSSID 1.3.6.1.4.1.25506.2.75.8.2.2.1.6
SSID of the Neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cDot11SSIDStringType  

hh3cDot11RRMHistoryTable 1.3.6.1.4.1.25506.2.75.8.2.3
This table shows the details of the latest three channel changes and power changes applied on all APs, including time of change, reason of the change and the channel, power, interference parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RRMHistoryEntry

hh3cDot11RRMHistoryEntry 1.3.6.1.4.1.25506.2.75.8.2.3.1
Each entry shows the details of channel and power changes.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RRMHistoryEntry  

hh3cDot11RRMHistoryId 1.3.6.1.4.1.25506.2.75.8.2.3.1.1
History number of the change.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMHistoryRecIndctr 1.3.6.1.4.1.25506.2.75.8.2.3.1.2
History record type of the change.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER before(1), after(2)  

hh3cDot11RRMHistoryChl 1.3.6.1.4.1.25506.2.75.8.2.3.1.3
Channel on which the radio operates before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cDot11ChannelScopeType  

hh3cDot11RRMHistoryPwr 1.3.6.1.4.1.25506.2.75.8.2.3.1.4
Power of the radio before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMHistoryLoad 1.3.6.1.4.1.25506.2.75.8.2.3.1.5
Load observed on the radio in percentage before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMHistoryUtlz 1.3.6.1.4.1.25506.2.75.8.2.3.1.6
Utilization of the radio in percentage before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMHistoryIntrf 1.3.6.1.4.1.25506.2.75.8.2.3.1.7
Interference observed on the radio in percentage before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMHistoryNoise 1.3.6.1.4.1.25506.2.75.8.2.3.1.8
Noise observed on the radio before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11RRMHistoryPER 1.3.6.1.4.1.25506.2.75.8.2.3.1.9
Packet error rate observed on the radio in percentage before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMHistoryRetryRate 1.3.6.1.4.1.25506.2.75.8.2.3.1.10
Percentage of retransmission happened on the radio before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11RRMHistoryChgReason 1.3.6.1.4.1.25506.2.75.8.2.3.1.11
Reason for the change of channel or power. The various bit positions are: |0 |Others | |1 |Coverage | |2 |Radar | |3 |Retransmission | |4 |Packets discarded | |5 |Interference | 0 is returned when the history record type is after.
Status: current Access: read-only
OBJECT-TYPE    
  BITS others(0), coverage(1), radar(2), retransmission(3), packetsDiscarded(4), interference(5)  

hh3cDot11RRMHistoryChgDateTime 1.3.6.1.4.1.25506.2.75.8.2.3.1.12
The time when the channel or power change occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hh3cDot11RRMRadioNbrInfoTable 1.3.6.1.4.1.25506.2.75.8.2.4
This table shows the RRM neighbor information of each radio on all APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RRMRadioNbrInfoEntry

hh3cDot11RRMRadioNbrInfoEntry 1.3.6.1.4.1.25506.2.75.8.2.4.1
Each entry contains information of RRM neighbor information of the radio on an AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RRMRadioNbrInfoEntry  

hh3cDot11RRMRadioNbrAPID 1.3.6.1.4.1.25506.2.75.8.2.4.1.1
AP serial id.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11ObjectIDType  

hh3cDot11RRMRadioNbrRadioID 1.3.6.1.4.1.25506.2.75.8.2.4.1.2
Radio Id on AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11RadioScopeType  

hh3cDot11RRMRadioNbrSSID 1.3.6.1.4.1.25506.2.75.8.2.4.1.3
All neighbour SSIDs scanned by the selected radio.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cDot11RRMNotifyGroup 1.3.6.1.4.1.25506.2.75.8.3
OBJECT IDENTIFIER    

hh3cDot11RRMChlQltyNotifications 1.3.6.1.4.1.25506.2.75.8.3.1
OBJECT IDENTIFIER    

hh3cDot11RRMChlQltyNtfPrefix 1.3.6.1.4.1.25506.2.75.8.3.1.0
OBJECT IDENTIFIER    

hh3cDot11RRMIntrfLimit 1.3.6.1.4.1.25506.2.75.8.3.1.0.1
This notification will be sent when interference on the radio exceeds the limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11RRMPERLimit 1.3.6.1.4.1.25506.2.75.8.3.1.0.2
This notification will be sent when packet error rate on the radio exceeds the limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11RRMNoiseLimit 1.3.6.1.4.1.25506.2.75.8.3.1.0.3
This notification will be sent when noise on the radio exceeds the limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11RRMResChgNotifications 1.3.6.1.4.1.25506.2.75.8.3.2
OBJECT IDENTIFIER    

hh3cDot11RRMResChgNtfPrefix 1.3.6.1.4.1.25506.2.75.8.3.2.0
OBJECT IDENTIFIER    

hh3cDot11RRMPowerChange 1.3.6.1.4.1.25506.2.75.8.3.2.0.1
This notification will be sent when power changed on the radio automatically.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11RRMNotificationsVar 1.3.6.1.4.1.25506.2.75.8.3.3
OBJECT IDENTIFIER    

hh3cDot11NewPower 1.3.6.1.4.1.25506.2.75.8.3.3.1
Power of the radio after the change of power.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cDot11OldPower 1.3.6.1.4.1.25506.2.75.8.3.3.2
Power of the radio before the change of power.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cDot11MonitorDetectedGroup 1.3.6.1.4.1.25506.2.75.8.4
OBJECT IDENTIFIER    

hh3cDot11MonitorDetectedDevTable 1.3.6.1.4.1.25506.2.75.8.4.1
This table shows the devices of AP detected
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11MonitorDetectedDevEntry

hh3cDot11MonitorDetectedDevEntry 1.3.6.1.4.1.25506.2.75.8.4.1.1
Each entry contains information of detected devices.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11MonitorDetectedDevEntry  

hh3cDot11MonitorDevMAC 1.3.6.1.4.1.25506.2.75.8.4.1.1.1
Represents MAC address of the device detected.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

hh3cDot11MonitorDevType 1.3.6.1.4.1.25506.2.75.8.4.1.1.2
Represents type of the device detected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER client(1), ap(2), adhoc(3), wirelessBridge(4), unknown(5)  

hh3cDot11MonitorDevVendor 1.3.6.1.4.1.25506.2.75.8.4.1.1.3
Represents vendor of the detected device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cDot11MonitorDevSSID 1.3.6.1.4.1.25506.2.75.8.4.1.1.4
Represents the service set identifier for the ESS of the device which type is ap or adhoc.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cDot11MonitorDevBSSID 1.3.6.1.4.1.25506.2.75.8.4.1.1.5
Represents the basic service set identifier of the detected device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hh3cDot11MonitorDevChannel 1.3.6.1.4.1.25506.2.75.8.4.1.1.6
Represents the channel in which the device was last detected. AP will choose the channel which has maximum signal strength as effective channel, as there is interference between adjacent channels.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cDot11ChannelScopeType  

hh3cDot11MonitorRadioId 1.3.6.1.4.1.25506.2.75.8.4.1.1.7
Represents the radio ID of the AP that detected the device.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cDot11RadioScopeType  

hh3cDot11MonitorDevMaxRSSI 1.3.6.1.4.1.25506.2.75.8.4.1.1.8
Represents the maximum detected RSSI of the device in a scan report cycle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11MonitorDevBeaconIntvl 1.3.6.1.4.1.25506.2.75.8.4.1.1.9
Represents the beacon interval for the detected device(not include the device which type is client).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11MonitorDevFstDctTime 1.3.6.1.4.1.25506.2.75.8.4.1.1.10
Represents the time at which the device was first detected.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hh3cDot11MonitorDevLstDctTime 1.3.6.1.4.1.25506.2.75.8.4.1.1.11
Represents the time at which the device was detected last time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

hh3cDot11MonitorDevClear 1.3.6.1.4.1.25506.2.75.8.4.1.1.12
This object is used to clear the information of the device detected in the WLAN. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

hh3cDot11MonitorDevSNR 1.3.6.1.4.1.25506.2.75.8.4.1.1.13
Represents the SNR of the device in a scan report cycle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32