HH3C-DOT11-CFG-MIB

File: HH3C-DOT11-CFG-MIB.mib (157097 bytes)

Imported modules

SNMPv2-TC RFC1213-MIB SNMPv2-SMI
INET-ADDRESS-MIB HH3C-DOT11-REF-MIB

Imported symbols

TruthValue RowStatus DisplayString
DateAndTime MacAddress ifIndex
MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Integer32 Unsigned32 IpAddress
InetAddress hh3cDot11 Hh3cDot11RadioType
Hh3cDot11TxPwrLevelScopeType Hh3cDot11ChannelScopeType Hh3cDot11SSIDStringType
Hh3cDot11AuthenType Hh3cDot11RadioScopeType Hh3cDot11SSIDEncryptModeType
Hh3cDot11SecIEStatusType Hh3cDot11PreambleType Hh3cDot11ServicePolicyIDType
Hh3cDot11TunnelSecSchemType Hh3cDot11RadioElementIndex Hh3cDot11WorkMode
Hh3cDot11CirMode hh3cDot11APElementIndex Hh3cDot11ObjectIDType
Hh3cDot11RadioType2 Hh3cDot11TruthValueCM

Defined Types

Hh3cDot11RadioPolicyEntry  
SEQUENCE    
  hh3cDot11RadioPolicyName STRING
  hh3cDot11BeaconInterval Integer32
  hh3cDot11DtimInterval Integer32
  hh3cDot11RtsThreshold Integer32
  hh3cDot11FragThreshold Integer32
  hh3cDot11ShortRetryThreshold Integer32
  hh3cDot11LongRetryThreshold Integer32
  hh3cDot11MaxRxLifetime Unsigned32
  hh3cDot11RdoPolicyRowStatus RowStatus
  hh3cDot11RdoClientMaxCount Integer32
  hh3cDot11BeaconIntervalMs Integer32

Hh3cDot11ServicePolicyEntry  
SEQUENCE    
  hh3cDot11ServicePolicyID Hh3cDot11ServicePolicyIDType
  hh3cDot11SSIDName Hh3cDot11SSIDStringType
  hh3cDot11SSIDHidden TruthValue
  hh3cDot11AuthenMode Hh3cDot11AuthenType
  hh3cDot11SSIDEncryptionMode Hh3cDot11SSIDEncryptModeType
  hh3cDot11WlanInfBindingType STRING
  hh3cDot11WlanInfBindingID Integer32
  hh3cDot11SrvPolicyRowStatus RowStatus
  hh3cDot11ClientMaxCount Integer32
  hh3cDot11SPInCirMode Hh3cDot11CirMode
  hh3cDot11SPInCirValue Integer32
  hh3cDot11SPOutCirMode Hh3cDot11CirMode
  hh3cDot11SPOutCirValue Integer32
  hh3cDot11WlanInfPVID Integer32
  hh3cDot11SPInCirStaticValue Integer32
  hh3cDot11SPOutCirStaticValue Integer32
  hh3cDot11SPIsolate TruthValue
  hh3cDot11WlanexAuthServerIP IpAddress
  hh3cDot11SPBeaconMeasEnable TruthValue
  hh3cDot11SPBeaconMeasType INTEGER
  hh3cDot11SPBeaconMeasInterval Integer32
  hh3cDot11AuthenModeCM INTEGER
  hh3cDot11SecIEStatusCM INTEGER
  hh3cDot11SecurityCiphersCM INTEGER
  hh3cDot11SrvPolicyStatusCM INTEGER
  hh3cDot11SSIDHiddenCM Hh3cDot11TruthValueCM
  hh3cDot11SPIsolateCM Hh3cDot11TruthValueCM

Hh3cDot11ServicePolicyExtEntry  
SEQUENCE    
  hh3cDot11ServicePolicyExtID Hh3cDot11ServicePolicyIDType
  hh3cDot11SecIEStatus Hh3cDot11SecIEStatusType
  hh3cDot11SecurityCiphers Integer32
  hh3cDot11CipherKeyIndex Integer32
  hh3cDot11CipherKey STRING
  hh3cDot11SrvPolicyExtRowStatus RowStatus
  hh3cDot11CipherKeyType INTEGER

Hh3cDot11RadioPolicyExtEntry  
SEQUENCE    
  hh3cDot11RPAPSerialID STRING
  hh3cDot11RPRadioID Hh3cDot11RadioScopeType
  hh3cDot11RPBeaconInterval Integer32
  hh3cDot11RPDtimInterval Integer32
  hh3cDot11RPRtsThreshold Integer32
  hh3cDot11RPFragThreshold Integer32
  hh3cDot11RPShortRetryThreshold Integer32
  hh3cDot11RPLongRetryThreshold Integer32
  hh3cDot11RPClientMaxCount Integer32
  hh3cDot11RPBeaconIntervalCM Integer32

Hh3cDot11SrvPortSecurityEntry  
SEQUENCE    
  hh3cDot11SecurityServicePolicyID Hh3cDot11ServicePolicyIDType
  hh3cDot11SrvPortSecurityMode INTEGER
  hh3cDot11SrvSecurityKeyType INTEGER
  hh3cDot11SrvSecurityPskKeyMode INTEGER
  hh3cDot11SrvSecurityPskKeyString DisplayString
  hh3cDot11SrvPortSecurityModeCM INTEGER

Hh3cDot11SrvPolicyExtendEntry  
SEQUENCE    
  hh3cDot11SPEnable INTEGER

Hh3cDot11APTemplateEntry  
SEQUENCE    
  hh3cDot11APTemplateName STRING
  hh3cDot11APSerialID STRING
  hh3cDot11TemplateAPModelAlias STRING
  hh3cDot11Description STRING
  hh3cDot11APWorkMode INTEGER
  hh3cDot11APTemplateRowStatus RowStatus
  hh3cDot11APName STRING
  hh3cDot11StatisInterv Integer32
  hh3cDot11APBroadcastProbeReply TruthValue
  hh3cDot11StaIdleTimerInterv Integer32
  hh3cDot11StaKeepAliveTimerInterv Integer32
  hh3cDot11APCir Integer32
  hh3cDot11APCbs Integer32
  hh3cDot11APPriorityLevel Integer32
  hh3cDot11APElementID Integer32
  hh3cDot11APDevDetectEnable TruthValue
  hh3cDot11APGetIPMethod INTEGER
  hh3cDot11StatisIntervMode INTEGER
  hh3cDot11ApTrapEnabled TruthValue
  hh3cDot11ApFmwUpdState INTEGER
  hh3cDot11StatisIntervModeCM INTEGER
  hh3cDot11ApNasIDCM STRING

Hh3cDot11RadioToConfigEntry  
SEQUENCE    
  hh3cDot11APTemplateNameCfg STRING
  hh3cDot11CfgRadioID Hh3cDot11RadioScopeType
  hh3cDot11CfgRadioPolicyName STRING
  hh3cDot11CfgRadioType Hh3cDot11RadioType
  hh3cDot11CfgChannel Hh3cDot11ChannelScopeType
  hh3cDot11CfgMaxTxPowerLevel Hh3cDot11TxPwrLevelScopeType
  hh3cDot11PreambleLen Hh3cDot11PreambleType
  hh3cDot11CfgRadioStatus TruthValue
  hh3cDot11CfgRdElementID Unsigned32
  hh3cDot11CfgWorkMode Hh3cDot11WorkMode
  hh3cDot11CfgPwrAttValue Integer32
  hh3cDot11RadioTxArithmetic INTEGER
  hh3cDot11CfgChannelLockStat INTEGER
  hh3cDot11CfgPowerLockStat INTEGER
  hh3cDot11CfgLBRdGroupId Unsigned32
  hh3cDot11CfgRRMSDRdGroupId Unsigned32
  hh3cDot11CfgRadioType2 Hh3cDot11RadioType2
  hh3cDot11CfgIDSEnable TruthValue
  hh3cDot11CfgSaEnable TruthValue
  hh3cDot11CfgSaCltRtFFTData TruthValue
  hh3cDot11CfgSaBand INTEGER

Hh3cDot11APServiceSetEntry  
SEQUENCE    
  hh3cDot11CfgServicePolicyID Hh3cDot11ServicePolicyIDType
  hh3cDot11SrvSetRowStatus RowStatus
  hh3cDot11ServiceSetVlanId Integer32

Hh3cDot11APSTVlanEntry  
SEQUENCE    
  hh3cDot11CfgSTVLANID Integer32
  hh3cDot11CfgSTNASPortID STRING
  hh3cDot11CfgServiceSetRowStatus RowStatus
  hh3cDot11CfgSTNASID STRING

Hh3cDot11APSysInfoSetEntry  
SEQUENCE    
  hh3cDot11APSysNetID STRING
  hh3cDot11APCpuUsageThreshold Integer32
  hh3cDot11APMemUsageThreshold Integer32

Hh3cDot11APLimitEntry  
SEQUENCE    
  hh3cDot11APSsidNumLimit Integer32
  hh3cDot11APUserCntLimit Integer32
  hh3cDot11APUserThreshold Integer32

Hh3cDot11APIfSetEntry  
SEQUENCE    
  hh3cDot11APSetIfIndex Integer32
  hh3cDot11APIfAlias DisplayString

Hh3cDot11APServiceVlanEntry  
SEQUENCE    
  hh3cDot11APServiceVlanSerialID STRING
  hh3cDot11APServiceVlanSPID Hh3cDot11ServicePolicyIDType
  hh3cDot11APServiceVlanId Integer32
  hh3cDot11APServiceVlanRowStatus RowStatus

Hh3cDot11RadioConfigEntry  
SEQUENCE    
  hh3cDot11RCAPSerialID STRING
  hh3cDot11RCRadioID Hh3cDot11RadioScopeType
  hh3cDot11RCRadioType Hh3cDot11RadioType
  hh3cDot11RCChannel Hh3cDot11ChannelScopeType
  hh3cDot11RCPreambleLen Hh3cDot11PreambleType
  hh3cDot11RCPwrAttValue Integer32
  hh3cDot11RCApPowerLevel Hh3cDot11TxPwrLevelScopeType
  hh3cDot11RCDynamicChlState TruthValue
  hh3cDot11RCDynamicPowerState TruthValue
  hh3cDot11RCRadioStatus TruthValue
  hh3cDot11RCRadioRate STRING
  hh3cDot11RCPwrAdjustStepLength Integer32
  hh3cDot11RCRadioType2 Hh3cDot11RadioType2
  hh3cDot11RCPreambleLenCM INTEGER
  hh3cDot11RCDynamicChlStateCM INTEGER
  hh3cDot11RCRadioStatusCM INTEGER
  hh3cDot11RCRadioRateCM STRING
  hh3cDot11RCDynamicPowerStateCM Hh3cDot11TruthValueCM
  hh3cDot11RCRssiThresholdCM Integer32

Hh3cDot11RadioSSIDCfgEntry  
SEQUENCE    
  hh3cDot11RadioSSIDSerialID Hh3cDot11ObjectIDType
  hh3cDot11RadioSSIDRadioID Hh3cDot11RadioScopeType
  hh3cDot11RadioSSIDWLANID Integer32
  hh3cDot11RadioSSIDIndex Hh3cDot11ServicePolicyIDType
  hh3cDot11RadioBSSID MacAddress
  hh3cDot11RadioSSIDRowStatus RowStatus

Hh3cDot11APSerialIDEntry  
SEQUENCE    
  hh3cDot11SIDAPSerialID STRING
  hh3cDot11SIDAPWorkMode INTEGER
  hh3cDot11SIDAPGetIPMethod INTEGER
  hh3cDot11SIDAPTemplateName STRING
  hh3cDot11SIDModelAlias STRING
  hh3cDot11SIDAPDescription STRING
  hh3cDot11SIDRowStatus RowStatus
  hh3cDot11SIDAPName STRING
  hh3cDot11SIDStatisInterv Integer32
  hh3cDot11SIDAPBroadcastProbeReply TruthValue
  hh3cDot11SIDAPStaIdleTimerInterv Integer32
  hh3cDot11SIDStaKeepAliveTimerInterv Integer32
  hh3cDot11SIDAPCir Integer32
  hh3cDot11SIDAPCbs Integer32
  hh3cDot11SIDAPPriorityLevel Integer32
  hh3cDot11SIDAPElementID Integer32
  hh3cDot11SIDAPDevDetectEnable TruthValue
  hh3cDot11SIDAPStatisIntervMode INTEGER
  hh3cDot11SIDAPWorkModeCM INTEGER

Hh3cDot11RadioIntfConfigEntry  
SEQUENCE    
  hh3cDot11RadioIfIdx Integer32
  hh3cDot11RadioCfgBeaconIntvl Integer32
  hh3cDot11RadioCfgDtimIntvl Integer32
  hh3cDot11RadioCfgRtsThreshold Integer32
  hh3cDot11RadioCfgFragThreshold Integer32
  hh3cDot11RadioCfgShtRetryThld Integer32
  hh3cDot11RadioCfglongRtrThld Integer32
  hh3cDot11RadioCfgMaxRxLifetime Unsigned32
  hh3cDot11RadioCfgType Hh3cDot11RadioType
  hh3cDot11RadioCfgChannel Hh3cDot11ChannelScopeType
  hh3cDot11RadioCfgMaxTxPwrLvl Hh3cDot11TxPwrLevelScopeType
  hh3cDot11RadioCfgPreambleLen Hh3cDot11PreambleType
  hh3cDot11RadioCfgWorkMode Hh3cDot11WorkMode
  hh3cDot11RadioCfgOnly11gEnable TruthValue
  hh3cDot11RadioCfgType2 Hh3cDot11RadioType2
  hh3cDot11RadioCfgRssithresholdCM Integer32

Hh3cDot11RadioIntfBindEntry  
SEQUENCE    
  hh3cDot11RadioIntfBindSvcPlcyID Hh3cDot11ServicePolicyIDType
  hh3cDot11RadioIntfBindIfIdx Unsigned32
  hh3cDot11RadioIntfBindRowStatus RowStatus

Hh3cDot11DataRateConfigEntry  
SEQUENCE    
  hh3cDot11RadioTypeID Hh3cDot11RadioType
  hh3cDot11SupportedRateSet STRING
  hh3cDot11MandatoryRateSet STRING
  hh3cDot11DisabledRateSet STRING
  hh3cDot11SmartRateSet STRING

Hh3cDot11WlanEssIfEntry  
SEQUENCE    
  hh3cDot11WlanEssIfNumber Integer32
  hh3cDot11WlanEssIfIndex Integer32
  hh3cDot11WlanEssRowStatus RowStatus

Hh3cDot11WlanBssIfEntry  
SEQUENCE    
  hh3cDot11WlanBssIfNumber Integer32
  hh3cDot11WlanBssIfIndex Integer32
  hh3cDot11WlanBssRowStatus RowStatus

Hh3cDot11WLANEthernetIfEntry  
SEQUENCE    
  hh3cDot11WlanEthernetIfNumber Integer32
  hh3cDot11WLANEthernetIfIndex Integer32
  hh3cDot11WlanEthernetRowStatus RowStatus

Hh3cDot11PortSecurityEntry  
SEQUENCE    
  hh3cDot11PortSecurityMode INTEGER
  hh3cDot11SecurityUserLoginTxKeyType INTEGER
  hh3cDot11SecurityPskKeyMode INTEGER
  hh3cDot11SecurityPskKeyString DisplayString

Hh3cDot11WlanMeshIfEntry  
SEQUENCE    
  hh3cDot11WlanMeshIfNumber Integer32
  hh3cDot11WlanMeshIfIndex Integer32
  hh3cDot11WlanMeshRowStatus RowStatus

Hh3cDot11nRadioCfgEntry  
SEQUENCE    
  hh3cDot11nRadioCfgIndex Hh3cDot11RadioElementIndex
  hh3cDot11nAMpduEnable TruthValue
  hh3cDot11nAMsduEnable TruthValue
  hh3cDot11nClientDot11nOnly TruthValue
  hh3cDot11nChanelBand INTEGER
  hh3cDot11nShortGiEnable TruthValue
  hh3cDot11nClientDot11acOnly TruthValue

Hh3cDot11RadioWDSEntry  
SEQUENCE    
  hh3cDot11RadioWDSIndex Hh3cDot11RadioElementIndex
  hh3cDot11RadioWDSMode INTEGER
  hh3cDot11RadioWDSNetWorkID STRING
  hh3cDot11WDSSecPskKeyMode INTEGER
  hh3cDot11WDSSecPskKeyString DisplayString

Hh3cDot11nRadioCfg2Entry  
SEQUENCE    
  hh3cDot11nRadioCfg2APIDIndex Hh3cDot11ObjectIDType
  hh3cDot11nRadioCfg2RadioIDIndex Hh3cDot11RadioScopeType
  hh3cDot11nRadioCfg2AMpduEnable TruthValue
  hh3cDot11nRadioCfg2AMsduEnable TruthValue
  hh3cDot11nRadioCfg2ClientDot11nOnly TruthValue
  hh3cDot11nRadioCfg2ChannelBand INTEGER
  hh3cDot11nRadioCfg2ShortGiEnable TruthValue
  hh3cDot11nRadioCfg2AMpduEnableCM INTEGER
  hh3cDot11nRadioCfg2ChannelBandCM INTEGER
  hh3cDot11nRadioCfg2ShortGiEnableCM INTEGER
  hh3cDot11nRadioCfg2ClientDot11acOnly TruthValue
  hh3cDot11nRadioCfg2ClientDot11nOnlyCM Hh3cDot11TruthValueCM

Defined Values

hh3cDot11CFG 1.3.6.1.4.1.25506.2.75.4
This MIB provides information about WLAN configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
MODULE-IDENTITY    

hh3cDot11GlobeConfigGroup 1.3.6.1.4.1.25506.2.75.4.1
OBJECT IDENTIFIER    

hh3cDot11PolicyConfigGroup 1.3.6.1.4.1.25506.2.75.4.2
OBJECT IDENTIFIER    

hh3cDot11APConfigGroup 1.3.6.1.4.1.25506.2.75.4.3
OBJECT IDENTIFIER    

hh3cDot11RadioIntfConfigGroup 1.3.6.1.4.1.25506.2.75.4.4
OBJECT IDENTIFIER    

hh3cDot11DataRateConfigGroup 1.3.6.1.4.1.25506.2.75.4.5
OBJECT IDENTIFIER    

hh3cDot11InterfaceConfigGroup 1.3.6.1.4.1.25506.2.75.4.6
OBJECT IDENTIFIER    

hh3cDot11ACBackupGroup 1.3.6.1.4.1.25506.2.75.4.7
OBJECT IDENTIFIER    

hh3cDot11RadioElementConfigGroup 1.3.6.1.4.1.25506.2.75.4.8
OBJECT IDENTIFIER    

hh3cDot11CfgNotifyGroup 1.3.6.1.4.1.25506.2.75.4.9
OBJECT IDENTIFIER    

hh3cDot11GlobalCountryCode 1.3.6.1.4.1.25506.2.75.4.1.1
Represents the country code for wireless network.
OBJECT-TYPE    
  STRING Size(3)  

hh3cDot11StaKeepALiveTimerIntvl 1.3.6.1.4.1.25506.2.75.4.1.2
Represents the interval of the keep alive requests sent between AP and STA. Default value 0 : The keep alive function is disabled.
OBJECT-TYPE    
  Unsigned32  

hh3cDot11StaIdleTimerIntvl 1.3.6.1.4.1.25506.2.75.4.1.3
Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
OBJECT-TYPE    
  Integer32  

hh3cDot11BroadcastProbeReply 1.3.6.1.4.1.25506.2.75.4.1.4
Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
OBJECT-TYPE    
  TruthValue  

hh3cDot11APScanMode 1.3.6.1.4.1.25506.2.75.4.1.5
Represents the scanning mode for AP. The following values are supported: active - AP will actively do scan. passive - AP will passively do scan.
OBJECT-TYPE    
  INTEGER active(1), passive(2)  

hh3cDot11ACCtrlTunnelSecSupport 1.3.6.1.4.1.25506.2.75.4.1.6
Represents what security schemes are supported for CAPWAP Control tunnel.
OBJECT-TYPE    
  Hh3cDot11TunnelSecSchemType  

hh3cDot11ACDataTunnelSecSupport 1.3.6.1.4.1.25506.2.75.4.1.7
Represents what security schemes are supported for CAPWAP data tunnel. The cleartxt is the default scheme.
OBJECT-TYPE    
  Hh3cDot11TunnelSecSchemType  

hh3cDot11ACAutoAPSupport 1.3.6.1.4.1.25506.2.75.4.1.8
Represents enable the auto AP functionality or not. 'true' : The auto AP functionality is enabled. 'false': The auto AP functionality is disabled
OBJECT-TYPE    
  TruthValue  

hh3cDot11AutoAPName 1.3.6.1.4.1.25506.2.75.4.1.9
Represents the name of auto AP that needs to be made persistent. When read the value from the node, NULL value be returned.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11PersistentName 1.3.6.1.4.1.25506.2.75.4.1.10
Represents the new name of auto AP after being made persistent. When read the value from the node, NULL value be returned.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11IntfTrapThreshold 1.3.6.1.4.1.25506.2.75.4.1.11
Represents threshold of interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
OBJECT-TYPE    
  Integer32  

hh3cDot11MonitorInterval 1.3.6.1.4.1.25506.2.75.4.1.12
Represents the monitoring interval. Default value 0 : The monitoring functionality is changed to real-time mode.
OBJECT-TYPE    
  Unsigned32 0 | 5..15  

hh3cDot11SampleInterval 1.3.6.1.4.1.25506.2.75.4.1.13
Represents the sampling interval. Default value 0 : The sampling functionality is disabled.
OBJECT-TYPE    
  Unsigned32 0 | 10..300  

hh3cDot11ChnlSwitChkInterval 1.3.6.1.4.1.25506.2.75.4.1.14
Represents the checking interval of channel switch.
OBJECT-TYPE    
  Unsigned32 8..180  

hh3cDot11APUserUplimit 1.3.6.1.4.1.25506.2.75.4.1.15
Represents the upper limit of user which has access to this AP.
OBJECT-TYPE    
  Unsigned32 0..65535  

hh3cDot11APL2IsolateEnable 1.3.6.1.4.1.25506.2.75.4.1.16
Represents enable the layer2 isolation or not. 'true' : The layer2 isolation functionality is enabled. 'false': The layer2 isolation functionality is disabled.
OBJECT-TYPE    
  TruthValue  

hh3cDot11APBSSIDSupportNum 1.3.6.1.4.1.25506.2.75.4.1.17
Represents the max number of BSSID supported by Current AP.
OBJECT-TYPE    
  Integer32  

hh3cDot11APLastUpdateStatTime 1.3.6.1.4.1.25506.2.75.4.1.18
Represents date and time update statistic information lately.
OBJECT-TYPE    
  DateAndTime  

hh3cDot11APDoSProtectEnable 1.3.6.1.4.1.25506.2.75.4.1.19
Represents enable the DOS protection or not. 'true' : The DOS protection functionality is enabled. 'false': The DOS protection functionality is disabled.
OBJECT-TYPE    
  TruthValue  

hh3cDot11MaxAPPerIf 1.3.6.1.4.1.25506.2.75.4.1.20
Represents max AP number that can be connected to AC interface.
OBJECT-TYPE    
  Unsigned32 0..65535  

hh3cDot11SampleTimeStamp 1.3.6.1.4.1.25506.2.75.4.1.21
Represents the start time of current sample period.
OBJECT-TYPE    
  DateAndTime  

hh3cDot11UplinkTrackId 1.3.6.1.4.1.25506.2.75.4.1.22
Represents the track id of AP. Default value 0 : The uplink track function for AP is disabled.
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RtCollectSwitch 1.3.6.1.4.1.25506.2.75.4.1.23
This object is used to turn on/off real-time statistics collection between AC and AP. If the value is true, hh3cDot11RtCollectIntvl will take effect. Otherwise, hh3cDot11RglCollectIntvl will take effect.
OBJECT-TYPE    
  TruthValue  

hh3cDot11RglCollectIntvl 1.3.6.1.4.1.25506.2.75.4.1.24
This object represents interval to regularly collect statistics from AC to AP.
OBJECT-TYPE    
  Integer32  

hh3cDot11RtCollectIntvl 1.3.6.1.4.1.25506.2.75.4.1.25
This object represents interval to collect real-time statistics from AC to AP.
OBJECT-TYPE    
  Integer32  

hh3cDot11AllAPCpuUsageThreshold 1.3.6.1.4.1.25506.2.75.4.1.26
The CPU usage threshold for all AP.
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11AllAPMemUsageThreshold 1.3.6.1.4.1.25506.2.75.4.1.27
The memory usage threshold for all AP.
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11AdjIntfTrapThreshold 1.3.6.1.4.1.25506.2.75.4.1.28
Represents threshold of adjacent interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
OBJECT-TYPE    
  Integer32  

hh3cDot11AllAPMonitorMode 1.3.6.1.4.1.25506.2.75.4.1.29
Represents what work mode for All AP. The following values are supported: normal, - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hh3cDot11GlobalApFmwUpdState 1.3.6.1.4.1.25506.2.75.4.1.30
Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cDot11ACNasIDCM 1.3.6.1.4.1.25506.2.75.4.1.31
Represents the NAS-ID of current AC.
OBJECT-TYPE    
  STRING  

hh3cDot11RadioPolicyTable 1.3.6.1.4.1.25506.2.75.4.2.1
The table defines the parameters for radio policy, as per radio policy of CLI. One radio policy could be assigned to the different radios (AP).
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RadioPolicyEntry

hh3cDot11RadioPolicyEntry 1.3.6.1.4.1.25506.2.75.4.2.1.1
Each entry contains information of each radio policy.
OBJECT-TYPE    
  Hh3cDot11RadioPolicyEntry  

hh3cDot11RadioPolicyName 1.3.6.1.4.1.25506.2.75.4.2.1.1.1
Represents the name of radio policy.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11BeaconInterval 1.3.6.1.4.1.25506.2.75.4.2.1.1.2
Represents the interval for Beacon management frame.
OBJECT-TYPE    
  Integer32  

hh3cDot11DtimInterval 1.3.6.1.4.1.25506.2.75.4.2.1.1.3
Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
OBJECT-TYPE    
  Integer32  

hh3cDot11RtsThreshold 1.3.6.1.4.1.25506.2.75.4.2.1.1.4
Represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
OBJECT-TYPE    
  Integer32  

hh3cDot11FragThreshold 1.3.6.1.4.1.25506.2.75.4.2.1.1.5
Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
OBJECT-TYPE    
  Integer32  

hh3cDot11ShortRetryThreshold 1.3.6.1.4.1.25506.2.75.4.2.1.1.6
Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RTSThreshold, which shall be made before a failure condition is indicated.
OBJECT-TYPE    
  Integer32  

hh3cDot11LongRetryThreshold 1.3.6.1.4.1.25506.2.75.4.2.1.1.7
Represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RTSThreshold, that shall be made before a failure condition is indicated.
OBJECT-TYPE    
  Integer32  

hh3cDot11MaxRxLifetime 1.3.6.1.4.1.25506.2.75.4.2.1.1.8
Represents the elapsed time. After the time specified by hh3cDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RdoPolicyRowStatus 1.3.6.1.4.1.25506.2.75.4.2.1.1.9
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11RdoClientMaxCount 1.3.6.1.4.1.25506.2.75.4.2.1.1.10
Represent the maximum number of stations supported by this radio policy.
OBJECT-TYPE    
  Integer32 0..2147483647  

hh3cDot11BeaconIntervalMs 1.3.6.1.4.1.25506.2.75.4.2.1.1.11
Represents the interval for Beacon management frame.
OBJECT-TYPE    
  Integer32  

hh3cDot11ServicePolicyTable 1.3.6.1.4.1.25506.2.75.4.2.2
The table defines the parameters for ESS, as per service policy of CLI. One service policy could be assigned to the different radios (AP).
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11ServicePolicyEntry

hh3cDot11ServicePolicyEntry 1.3.6.1.4.1.25506.2.75.4.2.2.1
Each entry contains information of each service policy.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyEntry  

hh3cDot11ServicePolicyID 1.3.6.1.4.1.25506.2.75.4.2.2.1.1
Represents the ID of each service policy.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyIDType  

hh3cDot11SSIDName 1.3.6.1.4.1.25506.2.75.4.2.2.1.2
Represents the ESS. As per CLI, the value of service policy name will be SSID.
OBJECT-TYPE    
  Hh3cDot11SSIDStringType  

hh3cDot11SSIDHidden 1.3.6.1.4.1.25506.2.75.4.2.2.1.3
This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame.
OBJECT-TYPE    
  TruthValue  

hh3cDot11AuthenMode 1.3.6.1.4.1.25506.2.75.4.2.2.1.4
Represents the Authentication mode defined by 802.11.
OBJECT-TYPE    
  Hh3cDot11AuthenType  

hh3cDot11SSIDEncryptionMode 1.3.6.1.4.1.25506.2.75.4.2.2.1.5
Represents the encryption mode for this ESS.
OBJECT-TYPE    
  Hh3cDot11SSIDEncryptModeType  

hh3cDot11WlanInfBindingType 1.3.6.1.4.1.25506.2.75.4.2.2.1.6
Represents the service policy will bind to what kind of data forwarding interface.
OBJECT-TYPE    
  STRING  

hh3cDot11WlanInfBindingID 1.3.6.1.4.1.25506.2.75.4.2.2.1.7
Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed.
OBJECT-TYPE    
  Integer32  

hh3cDot11SrvPolicyRowStatus 1.3.6.1.4.1.25506.2.75.4.2.2.1.8
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11ClientMaxCount 1.3.6.1.4.1.25506.2.75.4.2.2.1.9
Represent the maximum number of stations supported by this service policy.
OBJECT-TYPE    
  Integer32 0..2147483647  

hh3cDot11SPInCirMode 1.3.6.1.4.1.25506.2.75.4.2.2.1.10
CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.
OBJECT-TYPE    
  Hh3cDot11CirMode  

hh3cDot11SPInCirValue 1.3.6.1.4.1.25506.2.75.4.2.2.1.11
Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.
OBJECT-TYPE    
  Integer32  

hh3cDot11SPOutCirMode 1.3.6.1.4.1.25506.2.75.4.2.2.1.12
CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.
OBJECT-TYPE    
  Hh3cDot11CirMode  

hh3cDot11SPOutCirValue 1.3.6.1.4.1.25506.2.75.4.2.2.1.13
Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.
OBJECT-TYPE    
  Integer32  

hh3cDot11WlanInfPVID 1.3.6.1.4.1.25506.2.75.4.2.2.1.14
Represents the VLAN ID of SSID.
OBJECT-TYPE    
  Integer32  

hh3cDot11SPInCirStaticValue 1.3.6.1.4.1.25506.2.75.4.2.2.1.15
Represents the CIR of inbound direction for static CIR mode.
OBJECT-TYPE    
  Integer32  

hh3cDot11SPOutCirStaticValue 1.3.6.1.4.1.25506.2.75.4.2.2.1.16
Represents the CIR of outbound direction for static CIR mode.
OBJECT-TYPE    
  Integer32  

hh3cDot11SPIsolate 1.3.6.1.4.1.25506.2.75.4.2.2.1.17
If it is true, then stations connected with the service policy are isolated.
OBJECT-TYPE    
  TruthValue  

hh3cDot11WlanexAuthServerIP 1.3.6.1.4.1.25506.2.75.4.2.2.1.18
Represents the IP address of the Wlanex Authentication server
OBJECT-TYPE    
  IpAddress  

hh3cDot11SPBeaconMeasEnable 1.3.6.1.4.1.25506.2.75.4.2.2.1.19
If it is true, then beacon-measurement is enabled.
OBJECT-TYPE    
  TruthValue  

hh3cDot11SPBeaconMeasType 1.3.6.1.4.1.25506.2.75.4.2.2.1.20
Represents what the work mode for BeaconMeasurement type. The following values are supported: passive, - BeaconMeasurement will use the passive type. active - BeaconMeasurement will use the active type. beaconTable - BeaconMeasurement will use the beacon table type.
OBJECT-TYPE    
  INTEGER passive(1), active(2), beaconTable(3)  

hh3cDot11SPBeaconMeasInterval 1.3.6.1.4.1.25506.2.75.4.2.2.1.21
Represents the beacon-measurement interval.
OBJECT-TYPE    
  Integer32 10..200  

hh3cDot11AuthenModeCM 1.3.6.1.4.1.25506.2.75.4.2.2.1.22
Represents the Authentication mode defined by 802.11.
OBJECT-TYPE    
  INTEGER opensystem(0), sharedkey(1)  

hh3cDot11SecIEStatusCM 1.3.6.1.4.1.25506.2.75.4.2.2.1.23
To enable the security Information element in the beacon and probe response frames sent by AP.
OBJECT-TYPE    
  INTEGER none(0), wpa(1), wpa2(2), wlanex(3)  

hh3cDot11SecurityCiphersCM 1.3.6.1.4.1.25506.2.75.4.2.2.1.24
The WLAN system support the following cipher type for data frame encryption. none wep40 wep104 tkip aesccmp wpi-SMS4 When the value of node equals to zero, it means no configuration or undo operation.
OBJECT-TYPE    
  INTEGER none(0), wep40(1), wep104(2), tkip(3), aesccmp(4), wpisms4(5)  

hh3cDot11SrvPolicyStatusCM 1.3.6.1.4.1.25506.2.75.4.2.2.1.25
The status of the Service Policy.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hh3cDot11SSIDHiddenCM 1.3.6.1.4.1.25506.2.75.4.2.2.1.26
This attribute controls whether the SSID will be advertised in beacon frames. If it is dot11true, the SSID will not be advertised in beacon frames.
OBJECT-TYPE    
  Hh3cDot11TruthValueCM  

hh3cDot11SPIsolateCM 1.3.6.1.4.1.25506.2.75.4.2.2.1.27
If it is dot11true, the clients connected with the service policy are isolated to each other.
OBJECT-TYPE    
  Hh3cDot11TruthValueCM  

hh3cDot11ServicePolicyExtTable 1.3.6.1.4.1.25506.2.75.4.2.3
The table defines the parameters for ESS, as per service policy of CLI. When the value of hh3cDot11SSIDEncryptionMode equals to cipher(2), more configuration for a ESS will be put into the table.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11ServicePolicyExtEntry

hh3cDot11ServicePolicyExtEntry 1.3.6.1.4.1.25506.2.75.4.2.3.1
Each entry contains information of each service policy under cipher(2) mode.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyExtEntry  

hh3cDot11ServicePolicyExtID 1.3.6.1.4.1.25506.2.75.4.2.3.1.1
Represents the ID of each service policy.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyIDType  

hh3cDot11SecIEStatus 1.3.6.1.4.1.25506.2.75.4.2.3.1.2
To enable the security Information element in the beacon and probe response frames sent by AP.
OBJECT-TYPE    
  Hh3cDot11SecIEStatusType  

hh3cDot11SecurityCiphers 1.3.6.1.4.1.25506.2.75.4.2.3.1.3
The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy, it could support multiple cipher types at the same time. So the value of object could combine multiple value of cipher type above. When the value of node equals to zero, it means no configuration or undo operation.
OBJECT-TYPE    
  Integer32  

hh3cDot11CipherKeyIndex 1.3.6.1.4.1.25506.2.75.4.2.3.1.4
Represents the key index of cipher key for packet. When hh3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.
OBJECT-TYPE    
  Integer32  

hh3cDot11CipherKey 1.3.6.1.4.1.25506.2.75.4.2.3.1.5
Represents the cipher key for packet. When hh3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.
OBJECT-TYPE    
  STRING  

hh3cDot11SrvPolicyExtRowStatus 1.3.6.1.4.1.25506.2.75.4.2.3.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11CipherKeyType 1.3.6.1.4.1.25506.2.75.4.2.3.1.7
Represents the cipher key type of hh3cDot11CipherKey.
OBJECT-TYPE    
  INTEGER char(1), hex(2)  

hh3cDot11RadioPolicyExtTable 1.3.6.1.4.1.25506.2.75.4.2.4
The table defines the radio policy of each radio. It can't be modified if the radio policy is a default radio policy.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RadioPolicyExtEntry

hh3cDot11RadioPolicyExtEntry 1.3.6.1.4.1.25506.2.75.4.2.4.1
Each entry contains information of each radio policy.
OBJECT-TYPE    
  Hh3cDot11RadioPolicyExtEntry  

hh3cDot11RPAPSerialID 1.3.6.1.4.1.25506.2.75.4.2.4.1.1
This object represents the Serial ID of AP.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11RPRadioID 1.3.6.1.4.1.25506.2.75.4.2.4.1.2
This object represents each radio.
OBJECT-TYPE    
  Hh3cDot11RadioScopeType  

hh3cDot11RPBeaconInterval 1.3.6.1.4.1.25506.2.75.4.2.4.1.3
This object represents the interval for Beacon management frame.
OBJECT-TYPE    
  Integer32  

hh3cDot11RPDtimInterval 1.3.6.1.4.1.25506.2.75.4.2.4.1.4
This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
OBJECT-TYPE    
  Integer32  

hh3cDot11RPRtsThreshold 1.3.6.1.4.1.25506.2.75.4.2.4.1.5
This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
OBJECT-TYPE    
  Integer32  

hh3cDot11RPFragThreshold 1.3.6.1.4.1.25506.2.75.4.2.4.1.6
This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
OBJECT-TYPE    
  Integer32  

hh3cDot11RPShortRetryThreshold 1.3.6.1.4.1.25506.2.75.4.2.4.1.7
This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RTSThreshold, that shall be made before a failure condition is indicated.
OBJECT-TYPE    
  Integer32  

hh3cDot11RPLongRetryThreshold 1.3.6.1.4.1.25506.2.75.4.2.4.1.8
This object represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RTSThreshold, and that shall be made before a failure condition is indicated.
OBJECT-TYPE    
  Integer32  

hh3cDot11RPClientMaxCount 1.3.6.1.4.1.25506.2.75.4.2.4.1.9
This object represents the maximum number of stations supported by this radio policy.
OBJECT-TYPE    
  Integer32 0..2147483647  

hh3cDot11RPBeaconIntervalCM 1.3.6.1.4.1.25506.2.75.4.2.4.1.10
This object represents beacon interval.
OBJECT-TYPE    
  Integer32  

hh3cDot11SrvPortSecurityTable 1.3.6.1.4.1.25506.2.75.4.2.5
This table defines the WLAN security status for ESS, BSS and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hh3cPortSecurityTables should be used to configure port security.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11SrvPortSecurityEntry

hh3cDot11SrvPortSecurityEntry 1.3.6.1.4.1.25506.2.75.4.2.5.1
There is a row in this table for service policy.
OBJECT-TYPE    
  Hh3cDot11SrvPortSecurityEntry  

hh3cDot11SecurityServicePolicyID 1.3.6.1.4.1.25506.2.75.4.2.5.1.1
Represents the ID of each service policy.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyIDType  

hh3cDot11SrvPortSecurityMode 1.3.6.1.4.1.25506.2.75.4.2.5.1.2
Determines the security modes of the WLAN port. noRestrictions The default value, no any security mode is set. userLoginSecureExt Access to the port is denied until the port client is authorized (by 802.1X). psk Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext Access to the port is denied until the port client is authenticated (by ext).
OBJECT-TYPE    
  INTEGER noRestrictions(1), userLoginSecureExt(2), psk(3), macAddressAndPsk(4), userLoginSecureExtOrPsk(5), ext(6)  

hh3cDot11SrvSecurityKeyType 1.3.6.1.4.1.25506.2.75.4.2.5.1.3
This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption.
OBJECT-TYPE    
  INTEGER userLoginTxKeyTypeNone(1), userLoginTxKeyTypeDot11Key(2), userLoginTxKeyTypeRsaRC4Key(3)  

hh3cDot11SrvSecurityPskKeyMode 1.3.6.1.4.1.25506.2.75.4.2.5.1.4
This is the password input mode. When input as pskKeyModePassPhrase, hh3cDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hh3cDot11SrvSecurityPskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'.
OBJECT-TYPE    
  INTEGER pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3)  

hh3cDot11SrvSecurityPskKeyString 1.3.6.1.4.1.25506.2.75.4.2.5.1.5
This is the password string used for psk authentication.
OBJECT-TYPE    
  DisplayString Size(0..64)  

hh3cDot11SrvPortSecurityModeCM 1.3.6.1.4.1.25506.2.75.4.2.5.1.6
Determines the security modes of the WLAN port. none - The default value, no any security mode is set. psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). radius - Access to the port is denied until the port client is authorized (by 802.1X). wlanex - Access to the port is denied until the port client is authenticated by wlan cert.
OBJECT-TYPE    
  INTEGER none(0), psk(1), radius(2), wlanex(3)  

hh3cDot11SrvPolicyExtendTable 1.3.6.1.4.1.25506.2.75.4.2.6
The table defines the parameters of each service policy.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11SrvPolicyExtendEntry

hh3cDot11SrvPolicyExtendEntry 1.3.6.1.4.1.25506.2.75.4.2.6.1
Each entry contains information of each service policy.
OBJECT-TYPE    
  Hh3cDot11SrvPolicyExtendEntry  

hh3cDot11SPEnable 1.3.6.1.4.1.25506.2.75.4.2.6.1.1
Represents whether the service policy is enabled.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

hh3cDot11APTemplateTable 1.3.6.1.4.1.25506.2.75.4.3.1
By AP template CLI, administrator will configure the parameters of AP by convenience. Before AP boot up and connect to AC by CAPWAP tunnel, administrator will create AP template for each AP. When AP connect to AC, AC will assign configuration to AP by hh3cDot11APSerialID information in AP template.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11APTemplateEntry

hh3cDot11APTemplateEntry 1.3.6.1.4.1.25506.2.75.4.3.1.1
Each entry contains configuration information for each AP.
OBJECT-TYPE    
  Hh3cDot11APTemplateEntry  

hh3cDot11APTemplateName 1.3.6.1.4.1.25506.2.75.4.3.1.1.1
Represents the name of AP template.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11APSerialID 1.3.6.1.4.1.25506.2.75.4.3.1.1.2
Represents AP serial id.
OBJECT-TYPE    
  STRING  

hh3cDot11TemplateAPModelAlias 1.3.6.1.4.1.25506.2.75.4.3.1.1.3
Represents the alias of AP model name.
OBJECT-TYPE    
  STRING  

hh3cDot11Description 1.3.6.1.4.1.25506.2.75.4.3.1.1.4
This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.
OBJECT-TYPE    
  STRING  

hh3cDot11APWorkMode 1.3.6.1.4.1.25506.2.75.4.3.1.1.5
Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hh3cDot11APTemplateRowStatus 1.3.6.1.4.1.25506.2.75.4.3.1.1.6
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11APName 1.3.6.1.4.1.25506.2.75.4.3.1.1.7
Represents the AP name.
OBJECT-TYPE    
  STRING  

hh3cDot11StatisInterv 1.3.6.1.4.1.25506.2.75.4.3.1.1.8
Represents the interval of radio statistic.
OBJECT-TYPE    
  Integer32  

hh3cDot11APBroadcastProbeReply 1.3.6.1.4.1.25506.2.75.4.3.1.1.9
Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
OBJECT-TYPE    
  TruthValue  

hh3cDot11StaIdleTimerInterv 1.3.6.1.4.1.25506.2.75.4.3.1.1.10
Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
OBJECT-TYPE    
  Integer32  

hh3cDot11StaKeepAliveTimerInterv 1.3.6.1.4.1.25506.2.75.4.3.1.1.11
Represents the interval of the keep alive requests sent between AP and STA.
OBJECT-TYPE    
  Integer32  

hh3cDot11APCir 1.3.6.1.4.1.25506.2.75.4.3.1.1.12
Represents the committed information rate between AP and AC.
OBJECT-TYPE    
  Integer32  

hh3cDot11APCbs 1.3.6.1.4.1.25506.2.75.4.3.1.1.13
Represents the committed burst size between AP and AC.
OBJECT-TYPE    
  Integer32  

hh3cDot11APPriorityLevel 1.3.6.1.4.1.25506.2.75.4.3.1.1.14
This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.
OBJECT-TYPE    
  Integer32 0..7  

hh3cDot11APElementID 1.3.6.1.4.1.25506.2.75.4.3.1.1.15
This object represents the AP element ID.
OBJECT-TYPE    
  Integer32  

hh3cDot11APDevDetectEnable 1.3.6.1.4.1.25506.2.75.4.3.1.1.16
Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hh3cDot11APWorkMode is monitor, device detection can not be enabled with object hh3cDot11APDevDetectEnable.
OBJECT-TYPE    
  TruthValue  

hh3cDot11APGetIPMethod 1.3.6.1.4.1.25506.2.75.4.3.1.1.17
This object represents the method how AP gets IP address.
OBJECT-TYPE    
  INTEGER dhcpAlloc(1), static(2)  

hh3cDot11StatisIntervMode 1.3.6.1.4.1.25506.2.75.4.3.1.1.18
This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s
OBJECT-TYPE    
  INTEGER normal(1), realtime(2)  

hh3cDot11ApTrapEnabled 1.3.6.1.4.1.25506.2.75.4.3.1.1.19
Represents whether the trap status is enabled or not. 'true' : Enable the trap status; 'false' : Disable the trap status.
OBJECT-TYPE    
  TruthValue  

hh3cDot11ApFmwUpdState 1.3.6.1.4.1.25506.2.75.4.3.1.1.20
Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically. inherit - The status will inherit value from apgroup-view or system-view.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), inherit(3)  

hh3cDot11StatisIntervModeCM 1.3.6.1.4.1.25506.2.75.4.3.1.1.21
This object represents the mode of statistic interval. off - statistic interval value between 10s to 120s on - statistic interval value between 2s to 5s
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hh3cDot11ApNasIDCM 1.3.6.1.4.1.25506.2.75.4.3.1.1.22
Represents the NAS-ID of current service policy for each specific radio of AP.
OBJECT-TYPE    
  STRING  

hh3cDot11RadioToConfigTable 1.3.6.1.4.1.25506.2.75.4.3.2
Before AP connects to AC, administrator will configure radio parameter to each radio.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RadioToConfigEntry

hh3cDot11RadioToConfigEntry 1.3.6.1.4.1.25506.2.75.4.3.2.1
Each entry contains configuration information for each radio.
OBJECT-TYPE    
  Hh3cDot11RadioToConfigEntry  

hh3cDot11APTemplateNameCfg 1.3.6.1.4.1.25506.2.75.4.3.2.1.1
Represents the name of AP template.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11CfgRadioID 1.3.6.1.4.1.25506.2.75.4.3.2.1.2
Represents each radio.
OBJECT-TYPE    
  Hh3cDot11RadioScopeType  

hh3cDot11CfgRadioPolicyName 1.3.6.1.4.1.25506.2.75.4.3.2.1.3
Represents the name of radio policy.
OBJECT-TYPE    
  STRING  

hh3cDot11CfgRadioType 1.3.6.1.4.1.25506.2.75.4.3.2.1.4
Represents the radio will work with which 802.11 radio type.
OBJECT-TYPE    
  Hh3cDot11RadioType  

hh3cDot11CfgChannel 1.3.6.1.4.1.25506.2.75.4.3.2.1.5
Represents the channel allocation of radio.
OBJECT-TYPE    
  Hh3cDot11ChannelScopeType  

hh3cDot11CfgMaxTxPowerLevel 1.3.6.1.4.1.25506.2.75.4.3.2.1.6
Represents the maximal transmit power scope for AP.
OBJECT-TYPE    
  Hh3cDot11TxPwrLevelScopeType  

hh3cDot11PreambleLen 1.3.6.1.4.1.25506.2.75.4.3.2.1.7
Represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b or dot11g, then value for hh3cDot11PreambleLen will be valid. Otherwise, the value for it will be invalid.
OBJECT-TYPE    
  Hh3cDot11PreambleType  

hh3cDot11CfgRadioStatus 1.3.6.1.4.1.25506.2.75.4.3.2.1.8
Represents the radio admin status whether is enabled or disabled.
OBJECT-TYPE    
  TruthValue  

hh3cDot11CfgRdElementID 1.3.6.1.4.1.25506.2.75.4.3.2.1.9
Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.
OBJECT-TYPE    
  Unsigned32  

hh3cDot11CfgWorkMode 1.3.6.1.4.1.25506.2.75.4.3.2.1.10
Represents work mode of the radio.
OBJECT-TYPE    
  Hh3cDot11WorkMode  

hh3cDot11CfgPwrAttValue 1.3.6.1.4.1.25506.2.75.4.3.2.1.11
Represents the value of power attenuation.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioTxArithmetic 1.3.6.1.4.1.25506.2.75.4.3.2.1.12
Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the bandwidth first during the transmission.
OBJECT-TYPE    
  INTEGER quality(1), bandwidth(2)  

hh3cDot11CfgChannelLockStat 1.3.6.1.4.1.25506.2.75.4.3.2.1.13
Represents locked status of channel on the radio.
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

hh3cDot11CfgPowerLockStat 1.3.6.1.4.1.25506.2.75.4.3.2.1.14
Represents locked status of power on the radio.
OBJECT-TYPE    
  INTEGER unlocked(1), locked(2)  

hh3cDot11CfgLBRdGroupId 1.3.6.1.4.1.25506.2.75.4.3.2.1.15
Represents the load balance group ID allocated for the radio.
OBJECT-TYPE    
  Unsigned32  

hh3cDot11CfgRRMSDRdGroupId 1.3.6.1.4.1.25506.2.75.4.3.2.1.16
Represents the RRM self-decisive group ID allocated for the radio.
OBJECT-TYPE    
  Unsigned32  

hh3cDot11CfgRadioType2 1.3.6.1.4.1.25506.2.75.4.3.2.1.17
Represents the radio will work with which 802.11 radio type.
OBJECT-TYPE    
  Hh3cDot11RadioType2  

hh3cDot11CfgIDSEnable 1.3.6.1.4.1.25506.2.75.4.3.2.1.18
Represents whether intrusion detection is enabled for this radio.
OBJECT-TYPE    
  TruthValue  

hh3cDot11CfgSaEnable 1.3.6.1.4.1.25506.2.75.4.3.2.1.19
Represents whether spectrum analysis is enabled.
OBJECT-TYPE    
  TruthValue  

hh3cDot11CfgSaCltRtFFTData 1.3.6.1.4.1.25506.2.75.4.3.2.1.20
Represents whether to collect real-time FFT data for this radio.
OBJECT-TYPE    
  TruthValue  

hh3cDot11CfgSaBand 1.3.6.1.4.1.25506.2.75.4.3.2.1.21
Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be affected. Each band responds to the following channels. dot11g (Channels 1-14) dot11aLower (channels 36-64) dot11aMiddle (channels 100-140) dot11aUpper (channels 149-165).
OBJECT-TYPE    
  INTEGER dot11g(1), dot11aLower(2), dot11aMiddle(3), dot11aUpper(4)  

hh3cDot11APServiceSetTable 1.3.6.1.4.1.25506.2.75.4.3.3
For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11APServiceSetEntry

hh3cDot11APServiceSetEntry 1.3.6.1.4.1.25506.2.75.4.3.3.1
Each entry contains service policy information for each specific radio of AP.
OBJECT-TYPE    
  Hh3cDot11APServiceSetEntry  

hh3cDot11CfgServicePolicyID 1.3.6.1.4.1.25506.2.75.4.3.3.1.1
Represents the ID of each service policy used by the AP.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyIDType  

hh3cDot11SrvSetRowStatus 1.3.6.1.4.1.25506.2.75.4.3.3.1.2
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11ServiceSetVlanId 1.3.6.1.4.1.25506.2.75.4.3.3.1.3
Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio.
OBJECT-TYPE    
  Integer32 0..4094  

hh3cDot11APSTVlanTable 1.3.6.1.4.1.25506.2.75.4.3.11
For each service policy, it could be bind to several VLANs. The table describes the relationship between VLAN and service policies.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11APSTVlanEntry

hh3cDot11APSTVlanEntry 1.3.6.1.4.1.25506.2.75.4.3.11.1
Each entry contains VLAN and service policy information for each specific radio of AP.
OBJECT-TYPE    
  Hh3cDot11APSTVlanEntry  

hh3cDot11CfgSTVLANID 1.3.6.1.4.1.25506.2.75.4.3.11.1.1
Represents the VLAN that current Service Policy have bind to.
OBJECT-TYPE    
  Integer32 0..4094  

hh3cDot11CfgSTNASPortID 1.3.6.1.4.1.25506.2.75.4.3.11.1.2
Represents the NAS Port ID of current Service Policy for each specific radio of AP.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11CfgServiceSetRowStatus 1.3.6.1.4.1.25506.2.75.4.3.11.1.3
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11CfgSTNASID 1.3.6.1.4.1.25506.2.75.4.3.11.1.4
Represents the NAS ID of current Service Policy for each specific radio of AP.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11APSysInfoSetTable 1.3.6.1.4.1.25506.2.75.4.3.4
The table of the system information for each AP.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11APSysInfoSetEntry

hh3cDot11APSysInfoSetEntry 1.3.6.1.4.1.25506.2.75.4.3.4.1
The system information configuration for each AP.
OBJECT-TYPE    
  Hh3cDot11APSysInfoSetEntry  

hh3cDot11APSysNetID 1.3.6.1.4.1.25506.2.75.4.3.4.1.1
Represents the system Net ID for AP.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11APCpuUsageThreshold 1.3.6.1.4.1.25506.2.75.4.3.4.1.2
The CPU usage threshold for AP.
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11APMemUsageThreshold 1.3.6.1.4.1.25506.2.75.4.3.4.1.3
The memory usage threshold for AP.
OBJECT-TYPE    
  Integer32 0..100  

hh3cDot11APLimitTable 1.3.6.1.4.1.25506.2.75.4.3.5
For each connected APs, administrator could configure a series of limits. This table describes the limit information for AP(s).
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11APLimitEntry

hh3cDot11APLimitEntry 1.3.6.1.4.1.25506.2.75.4.3.5.1
Each entry contains the limit information for each AP.
OBJECT-TYPE    
  Hh3cDot11APLimitEntry  

hh3cDot11APSsidNumLimit 1.3.6.1.4.1.25506.2.75.4.3.5.1.1
Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP.
OBJECT-TYPE    
  Integer32 0..65535  

hh3cDot11APUserCntLimit 1.3.6.1.4.1.25506.2.75.4.3.5.1.2
Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP.
OBJECT-TYPE    
  Integer32 0..65535  

hh3cDot11APUserThreshold 1.3.6.1.4.1.25506.2.75.4.3.5.1.3
Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has access to this AP.
OBJECT-TYPE    
  Integer32 0..65535  

hh3cDot11APIfSetTable 1.3.6.1.4.1.25506.2.75.4.3.6
The table of the interface information for each AP.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11APIfSetEntry

hh3cDot11APIfSetEntry 1.3.6.1.4.1.25506.2.75.4.3.6.1
The interface information configuration for each AP.
OBJECT-TYPE    
  Hh3cDot11APIfSetEntry  

hh3cDot11APSetIfIndex 1.3.6.1.4.1.25506.2.75.4.3.6.1.1
Represents the index for a interface.
OBJECT-TYPE    
  Integer32  

hh3cDot11APIfAlias 1.3.6.1.4.1.25506.2.75.4.3.6.1.2
This object is an 'alias' name for the interface as specified by a network manager for AP.
OBJECT-TYPE    
  DisplayString  

hh3cDot11APServiceVlanTable 1.3.6.1.4.1.25506.2.75.4.3.7
For all the radios on the AP, it could configure multiple service policies. The table describes the relationship between AP and service policies.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11APServiceVlanEntry

hh3cDot11APServiceVlanEntry 1.3.6.1.4.1.25506.2.75.4.3.7.1
Each entry contains service policy information for each AP.
OBJECT-TYPE    
  Hh3cDot11APServiceVlanEntry  

hh3cDot11APServiceVlanSerialID 1.3.6.1.4.1.25506.2.75.4.3.7.1.1
This object represents AP serial id.
OBJECT-TYPE    
  STRING  

hh3cDot11APServiceVlanSPID 1.3.6.1.4.1.25506.2.75.4.3.7.1.2
This object represents the ID of each service policy used by the AP.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyIDType  

hh3cDot11APServiceVlanId 1.3.6.1.4.1.25506.2.75.4.3.7.1.3
This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio.
OBJECT-TYPE    
  Integer32 0..4094  

hh3cDot11APServiceVlanRowStatus 1.3.6.1.4.1.25506.2.75.4.3.7.1.4
This object represents the status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11RadioConfigTable 1.3.6.1.4.1.25506.2.75.4.3.8
Before AP connects to AC, administrator will configure radio parameter to each radio.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RadioConfigEntry

hh3cDot11RadioConfigEntry 1.3.6.1.4.1.25506.2.75.4.3.8.1
Each entry contains configuration information for each radio.
OBJECT-TYPE    
  Hh3cDot11RadioConfigEntry  

hh3cDot11RCAPSerialID 1.3.6.1.4.1.25506.2.75.4.3.8.1.1
This object represents the Serial ID of AP.
OBJECT-TYPE    
  STRING Size(0..127)  

hh3cDot11RCRadioID 1.3.6.1.4.1.25506.2.75.4.3.8.1.2
This object represents each radio.
OBJECT-TYPE    
  Hh3cDot11RadioScopeType  

hh3cDot11RCRadioType 1.3.6.1.4.1.25506.2.75.4.3.8.1.3
This object represents the radio will work with which 802.11 radio type.
OBJECT-TYPE    
  Hh3cDot11RadioType  

hh3cDot11RCChannel 1.3.6.1.4.1.25506.2.75.4.3.8.1.4
This object represents the channel allocation of radio.
OBJECT-TYPE    
  Hh3cDot11ChannelScopeType  

hh3cDot11RCPreambleLen 1.3.6.1.4.1.25506.2.75.4.3.8.1.5
This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b or dot11g, then value for hh3cDot11PreambleLen will be valid. Otherwise, the value for it will be invalid.
OBJECT-TYPE    
  Hh3cDot11PreambleType  

hh3cDot11RCPwrAttValue 1.3.6.1.4.1.25506.2.75.4.3.8.1.6
This object represents the value of power attenuation.
OBJECT-TYPE    
  Integer32  

hh3cDot11RCApPowerLevel 1.3.6.1.4.1.25506.2.75.4.3.8.1.7
Represents the maximal transmit power scope for AP.
OBJECT-TYPE    
  Hh3cDot11TxPwrLevelScopeType  

hh3cDot11RCDynamicChlState 1.3.6.1.4.1.25506.2.75.4.3.8.1.8
Enable/Disable dynamic channel selection.
OBJECT-TYPE    
  TruthValue  

hh3cDot11RCDynamicPowerState 1.3.6.1.4.1.25506.2.75.4.3.8.1.9
Enable/Disable dynamic power selection for the band.
OBJECT-TYPE    
  TruthValue  

hh3cDot11RCRadioStatus 1.3.6.1.4.1.25506.2.75.4.3.8.1.10
Represents the radio admin status whether is enabled or disabled.
OBJECT-TYPE    
  TruthValue  

hh3cDot11RCRadioRate 1.3.6.1.4.1.25506.2.75.4.3.8.1.11
Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the configured rates. (Note: For 802.11n radios, the first value will be treated as a mandatory rate, and the second value will be treated as a supported rate. If you configure more than two rates, the configuration cannot take effect. If you configure only one rate, it is considered as the mandatory rate by default.)
OBJECT-TYPE    
  STRING Size(0..255)  

hh3cDot11RCPwrAdjustStepLength 1.3.6.1.4.1.25506.2.75.4.3.8.1.12
Power adjustment step-length in dBm.
OBJECT-TYPE    
  Integer32  

hh3cDot11RCRadioType2 1.3.6.1.4.1.25506.2.75.4.3.8.1.13
This object represents the radio will work with which 802.11 radio type.
OBJECT-TYPE    
  Hh3cDot11RadioType2  

hh3cDot11RCPreambleLenCM 1.3.6.1.4.1.25506.2.75.4.3.8.1.14
This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b or dot11g, then value for hh3cDot11PreambleLenCM will be valid. Otherwise, the value for it will be invalid.
OBJECT-TYPE    
  INTEGER long(0), short(1)  

hh3cDot11RCDynamicChlStateCM 1.3.6.1.4.1.25506.2.75.4.3.8.1.15
Enable/Disable dynamic channel selection.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hh3cDot11RCRadioStatusCM 1.3.6.1.4.1.25506.2.75.4.3.8.1.16
Represents the radio admin status whether is enabled or disabled.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

hh3cDot11RCRadioRateCM 1.3.6.1.4.1.25506.2.75.4.3.8.1.17
Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should be one of the configured rates. (Note: For 802.11n radios, the first value is mandatory rate, and the second value is supported rate. If more than two rate values are configured, the configuration will not take effect. If only one rate value is configured, the mandatory rate will be set to the default value.)
OBJECT-TYPE    
  STRING Size(0..255)  

hh3cDot11RCDynamicPowerStateCM 1.3.6.1.4.1.25506.2.75.4.3.8.1.18
Enable/disable dynamic power selection for the band.
OBJECT-TYPE    
  Hh3cDot11TruthValueCM  

hh3cDot11RCRssiThresholdCM 1.3.6.1.4.1.25506.2.75.4.3.8.1.19
Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioSSIDCfgTable 1.3.6.1.4.1.25506.2.75.4.3.9
For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RadioSSIDCfgEntry

hh3cDot11RadioSSIDCfgEntry 1.3.6.1.4.1.25506.2.75.4.3.9.1
Each entry contains SSID configuration information for each radio.
OBJECT-TYPE    
  Hh3cDot11RadioSSIDCfgEntry  

hh3cDot11RadioSSIDSerialID 1.3.6.1.4.1.25506.2.75.4.3.9.1.1
This object represents the serial ID of AP.
OBJECT-TYPE    
  Hh3cDot11ObjectIDType  

hh3cDot11RadioSSIDRadioID 1.3.6.1.4.1.25506.2.75.4.3.9.1.2
This object represents each radio.
OBJECT-TYPE    
  Hh3cDot11RadioScopeType  

hh3cDot11RadioSSIDWLANID 1.3.6.1.4.1.25506.2.75.4.3.9.1.3
This object represents the WLAN ID of the BSSID.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioSSIDIndex 1.3.6.1.4.1.25506.2.75.4.3.9.1.4
This object represents the ID of each service policy used by the radio.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyIDType  

hh3cDot11RadioBSSID 1.3.6.1.4.1.25506.2.75.4.3.9.1.5
As MAC address format, it is used to identify BSS.
OBJECT-TYPE    
  MacAddress  

hh3cDot11RadioSSIDRowStatus 1.3.6.1.4.1.25506.2.75.4.3.9.1.6
RowStatus.
OBJECT-TYPE    
  RowStatus  

hh3cDot11APSerialIDTable 1.3.6.1.4.1.25506.2.75.4.3.10
The table will provide the general information about APs.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11APSerialIDEntry

hh3cDot11APSerialIDEntry 1.3.6.1.4.1.25506.2.75.4.3.10.1
Each entry contains the general information of an AP.
OBJECT-TYPE    
  Hh3cDot11APSerialIDEntry  

hh3cDot11SIDAPSerialID 1.3.6.1.4.1.25506.2.75.4.3.10.1.1
Represents AP serial id.
OBJECT-TYPE    
  STRING  

hh3cDot11SIDAPWorkMode 1.3.6.1.4.1.25506.2.75.4.3.10.1.2
Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

hh3cDot11SIDAPGetIPMethod 1.3.6.1.4.1.25506.2.75.4.3.10.1.3
This object represents the method how AP gets IP address.
OBJECT-TYPE    
  INTEGER dhcpAlloc(1), static(2)  

hh3cDot11SIDAPTemplateName 1.3.6.1.4.1.25506.2.75.4.3.10.1.4
Represents the name of AP template.
OBJECT-TYPE    
  STRING  

hh3cDot11SIDModelAlias 1.3.6.1.4.1.25506.2.75.4.3.10.1.5
Represents the alias of AP model name.
OBJECT-TYPE    
  STRING  

hh3cDot11SIDAPDescription 1.3.6.1.4.1.25506.2.75.4.3.10.1.6
This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.
OBJECT-TYPE    
  STRING  

hh3cDot11SIDRowStatus 1.3.6.1.4.1.25506.2.75.4.3.10.1.7
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11SIDAPName 1.3.6.1.4.1.25506.2.75.4.3.10.1.8
Represents the AP name.
OBJECT-TYPE    
  STRING  

hh3cDot11SIDStatisInterv 1.3.6.1.4.1.25506.2.75.4.3.10.1.9
Represents the interval of radio statistic.
OBJECT-TYPE    
  Integer32  

hh3cDot11SIDAPBroadcastProbeReply 1.3.6.1.4.1.25506.2.75.4.3.10.1.10
Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
OBJECT-TYPE    
  TruthValue  

hh3cDot11SIDAPStaIdleTimerInterv 1.3.6.1.4.1.25506.2.75.4.3.10.1.11
Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
OBJECT-TYPE    
  Integer32  

hh3cDot11SIDStaKeepAliveTimerInterv 1.3.6.1.4.1.25506.2.75.4.3.10.1.12
Represents the interval of the keep alive requests sent between AP and STA.
OBJECT-TYPE    
  Integer32  

hh3cDot11SIDAPCir 1.3.6.1.4.1.25506.2.75.4.3.10.1.13
Represents the committed information rate between AP and AC.
OBJECT-TYPE    
  Integer32  

hh3cDot11SIDAPCbs 1.3.6.1.4.1.25506.2.75.4.3.10.1.14
Represents the committed burst size between AP and AC.
OBJECT-TYPE    
  Integer32  

hh3cDot11SIDAPPriorityLevel 1.3.6.1.4.1.25506.2.75.4.3.10.1.15
This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.
OBJECT-TYPE    
  Integer32 0..7  

hh3cDot11SIDAPElementID 1.3.6.1.4.1.25506.2.75.4.3.10.1.16
This object represents the AP element ID.
OBJECT-TYPE    
  Integer32  

hh3cDot11SIDAPDevDetectEnable 1.3.6.1.4.1.25506.2.75.4.3.10.1.17
Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hh3cDot11APWorkMode is monitor, device detection can not be enabled with object hh3cDot11SIDAPDevDetectEnable.
OBJECT-TYPE    
  TruthValue  

hh3cDot11SIDAPStatisIntervMode 1.3.6.1.4.1.25506.2.75.4.3.10.1.18
This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s
OBJECT-TYPE    
  INTEGER normal(1), realtime(2)  

hh3cDot11SIDAPWorkModeCM 1.3.6.1.4.1.25506.2.75.4.3.10.1.19
Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. SemiMonitor - AP will supply WLAN service and Device detection is enabled.
OBJECT-TYPE    
  INTEGER normal(0), monitor(1), semimonitor(2)  

hh3cDot11RadioIntfConfigTable 1.3.6.1.4.1.25506.2.75.4.4.1
The table defines the parameters for radio in AP, as per radio.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RadioIntfConfigEntry

hh3cDot11RadioIntfConfigEntry 1.3.6.1.4.1.25506.2.75.4.4.1.1
Each entry contains information of each radio in AP.
OBJECT-TYPE    
  Hh3cDot11RadioIntfConfigEntry  

hh3cDot11RadioIfIdx 1.3.6.1.4.1.25506.2.75.4.4.1.1.1
Represents the Radio IfIndex of radio in AP.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioCfgBeaconIntvl 1.3.6.1.4.1.25506.2.75.4.4.1.1.2
Represents the interval for Beacon management frame.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioCfgDtimIntvl 1.3.6.1.4.1.25506.2.75.4.4.1.1.3
Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioCfgRtsThreshold 1.3.6.1.4.1.25506.2.75.4.4.1.1.4
Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioCfgFragThreshold 1.3.6.1.4.1.25506.2.75.4.4.1.1.5
Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioCfgShtRetryThld 1.3.6.1.4.1.25506.2.75.4.4.1.1.6
Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioCfglongRtrThld 1.3.6.1.4.1.25506.2.75.4.4.1.1.7
Represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioCfgMaxRxLifetime 1.3.6.1.4.1.25506.2.75.4.4.1.1.8
Represents the elapsed time. After the time specified by hh3cDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RadioCfgType 1.3.6.1.4.1.25506.2.75.4.4.1.1.9
Represents the radio will work with which 802.11 radio type.
OBJECT-TYPE    
  Hh3cDot11RadioType  

hh3cDot11RadioCfgChannel 1.3.6.1.4.1.25506.2.75.4.4.1.1.10
Represents the channel allocation of radio.
OBJECT-TYPE    
  Hh3cDot11ChannelScopeType  

hh3cDot11RadioCfgMaxTxPwrLvl 1.3.6.1.4.1.25506.2.75.4.4.1.1.11
Represents the maximal transmit power scope for AP.
OBJECT-TYPE    
  Hh3cDot11TxPwrLevelScopeType  

hh3cDot11RadioCfgPreambleLen 1.3.6.1.4.1.25506.2.75.4.4.1.1.12
Represents whether use long or short preamble for 802.11 MAC frame.
OBJECT-TYPE    
  Hh3cDot11PreambleType  

hh3cDot11RadioCfgWorkMode 1.3.6.1.4.1.25506.2.75.4.4.1.1.13
Represents work mode of the radio.
OBJECT-TYPE    
  Hh3cDot11WorkMode  

hh3cDot11RadioCfgOnly11gEnable 1.3.6.1.4.1.25506.2.75.4.4.1.1.14
Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled.
OBJECT-TYPE    
  TruthValue  

hh3cDot11RadioCfgType2 1.3.6.1.4.1.25506.2.75.4.4.1.1.15
Represents the radio will work with which 802.11 radio type.
OBJECT-TYPE    
  Hh3cDot11RadioType2  

hh3cDot11RadioCfgRssithresholdCM 1.3.6.1.4.1.25506.2.75.4.4.1.1.16
Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
OBJECT-TYPE    
  Integer32  

hh3cDot11RadioIntfBindTable 1.3.6.1.4.1.25506.2.75.4.4.2
The table defines the binding information for each radio in AP.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RadioIntfBindEntry

hh3cDot11RadioIntfBindEntry 1.3.6.1.4.1.25506.2.75.4.4.2.1
Each entry contains the radio interface binding information in AP.
OBJECT-TYPE    
  Hh3cDot11RadioIntfBindEntry  

hh3cDot11RadioIntfBindSvcPlcyID 1.3.6.1.4.1.25506.2.75.4.4.2.1.1
Represents the ID of each service policy.
OBJECT-TYPE    
  Hh3cDot11ServicePolicyIDType  

hh3cDot11RadioIntfBindIfIdx 1.3.6.1.4.1.25506.2.75.4.4.2.1.2
Represents the Ifindex of interface which is binded to the radio.
OBJECT-TYPE    
  Unsigned32  

hh3cDot11RadioIntfBindRowStatus 1.3.6.1.4.1.25506.2.75.4.4.2.1.3
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

hh3cDot11DataRateConfigTable 1.3.6.1.4.1.25506.2.75.4.5.1
Table will provide data rate configuration for a specific radio type.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11DataRateConfigEntry

hh3cDot11DataRateConfigEntry 1.3.6.1.4.1.25506.2.75.4.5.1.1
Each entry of the table will provide data rate configuration for a specific radio type.
OBJECT-TYPE    
  Hh3cDot11DataRateConfigEntry  

hh3cDot11RadioTypeID 1.3.6.1.4.1.25506.2.75.4.5.1.1.1
Represents the radio type.
OBJECT-TYPE    
  Hh3cDot11RadioType  

hh3cDot11SupportedRateSet 1.3.6.1.4.1.25506.2.75.4.5.1.1.2
Represents the supported rate set of a particular radio type.
OBJECT-TYPE    
  STRING Size(0..255)  

hh3cDot11MandatoryRateSet 1.3.6.1.4.1.25506.2.75.4.5.1.1.3
Represents the mandatory rate set of a particular radio type.
OBJECT-TYPE    
  STRING Size(0..255)  

hh3cDot11DisabledRateSet 1.3.6.1.4.1.25506.2.75.4.5.1.1.4
Represents the disabled rate set of a particular radio type.
OBJECT-TYPE    
  STRING Size(0..255)  

hh3cDot11SmartRateSet 1.3.6.1.4.1.25506.2.75.4.5.1.1.5
Represents the rate set of a particular radio type.
OBJECT-TYPE    
  STRING Size(0..255)  

hh3cDot11WlanEssIfTable 1.3.6.1.4.1.25506.2.75.4.6.1
This table is used to configure WLAN ESS interface.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11WlanEssIfEntry

hh3cDot11WlanEssIfEntry 1.3.6.1.4.1.25506.2.75.4.6.1.1
Each entry contains the WLAN ESS interface configuration.
OBJECT-TYPE    
  Hh3cDot11WlanEssIfEntry  

hh3cDot11WlanEssIfNumber 1.3.6.1.4.1.25506.2.75.4.6.1.1.1
This node represents the WLAN ESS interface number.
OBJECT-TYPE    
  Integer32  

hh3cDot11WlanEssIfIndex 1.3.6.1.4.1.25506.2.75.4.6.1.1.2
This node represents the ifIndex of WLAN-ESS interface.
OBJECT-TYPE    
  Integer32  

hh3cDot11WlanEssRowStatus 1.3.6.1.4.1.25506.2.75.4.6.1.1.3
This node represents the WLAN ESS interface row status.
OBJECT-TYPE    
  RowStatus  

hh3cDot11WlanBssIfTable 1.3.6.1.4.1.25506.2.75.4.6.2
This table is used to configure WLAN BSS interface.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11WlanBssIfEntry

hh3cDot11WlanBssIfEntry 1.3.6.1.4.1.25506.2.75.4.6.2.1
Each entry contains the WLAN BSS interface configuration.
OBJECT-TYPE    
  Hh3cDot11WlanBssIfEntry  

hh3cDot11WlanBssIfNumber 1.3.6.1.4.1.25506.2.75.4.6.2.1.1
This node represents the WLAN BSS interface number.
OBJECT-TYPE    
  Integer32  

hh3cDot11WlanBssIfIndex 1.3.6.1.4.1.25506.2.75.4.6.2.1.2
This node represents the ifIndex of WLAN-BSS interface.
OBJECT-TYPE    
  Integer32  

hh3cDot11WlanBssRowStatus 1.3.6.1.4.1.25506.2.75.4.6.2.1.3
This node represents the WLAN BSS interface row status.
OBJECT-TYPE    
  RowStatus  

hh3cDot11WLANEthernetIfTable 1.3.6.1.4.1.25506.2.75.4.6.3
This table is used to configure WLAN Ethernet interface.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11WLANEthernetIfEntry

hh3cDot11WLANEthernetIfEntry 1.3.6.1.4.1.25506.2.75.4.6.3.1
Each entry contains the WLAN Ethernet interface configuration.
OBJECT-TYPE    
  Hh3cDot11WLANEthernetIfEntry  

hh3cDot11WlanEthernetIfNumber 1.3.6.1.4.1.25506.2.75.4.6.3.1.1
This node represents the WLAN Ethernet interface number.
OBJECT-TYPE    
  Integer32  

hh3cDot11WLANEthernetIfIndex 1.3.6.1.4.1.25506.2.75.4.6.3.1.2
This node represents the ifIndex of WLAN-Ethernet interface.
OBJECT-TYPE    
  Integer32  

hh3cDot11WlanEthernetRowStatus 1.3.6.1.4.1.25506.2.75.4.6.3.1.3
This node represents the Wlan Ethernet interface row status.
OBJECT-TYPE    
  RowStatus  

hh3cDot11PortSecurityTable 1.3.6.1.4.1.25506.2.75.4.6.4
This table defines the WLAN security status for ESS, BSS, mesh and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hh3cPortSecurityTables should be used to configure port security.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11PortSecurityEntry

hh3cDot11PortSecurityEntry 1.3.6.1.4.1.25506.2.75.4.6.4.1
There is a row in this table for each ESS, BSS and WLAN-Ethernet interface.It is indexed using the object ifIndex in RFC1213-MIB.
OBJECT-TYPE    
  Hh3cDot11PortSecurityEntry  

hh3cDot11PortSecurityMode 1.3.6.1.4.1.25506.2.75.4.6.4.1.1
Determines the security modes of the WLAN port. noRestrictions - The default value,no any security mode is set. userLoginSecureExt - Access to the port is denied until the port client is authorized (by 802.1X). psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk - The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk - This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext - Access to the port is denied until the port client is authenticated (by ext).
OBJECT-TYPE    
  INTEGER noRestrictions(1), userLoginSecureExt(2), psk(3), macAddressAndPsk(4), userLoginSecureExtOrPsk(5), ext(6)  

hh3cDot11SecurityUserLoginTxKeyType 1.3.6.1.4.1.25506.2.75.4.6.4.1.2
This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption.
OBJECT-TYPE    
  INTEGER userLoginTxKeyTypeNone(1), userLoginTxKeyTypeDot11Key(2), userLoginTxKeyTypeRsaRC4Key(3)  

hh3cDot11SecurityPskKeyMode 1.3.6.1.4.1.25506.2.75.4.6.4.1.3
This is the password input mode. When input as pskKeyModePassPhrase, hh3cDot11SecurePskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hh3cDot11SecurePskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'.
OBJECT-TYPE    
  INTEGER pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3)  

hh3cDot11SecurityPskKeyString 1.3.6.1.4.1.25506.2.75.4.6.4.1.4
This is the password string used for psk authentication.
OBJECT-TYPE    
  DisplayString  

hh3cDot11WlanMeshIfTable 1.3.6.1.4.1.25506.2.75.4.6.5
This table is used to configure WLAN mesh interface.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11WlanMeshIfEntry

hh3cDot11WlanMeshIfEntry 1.3.6.1.4.1.25506.2.75.4.6.5.1
Each entry contains the WLAN mesh interface configuration.
OBJECT-TYPE    
  Hh3cDot11WlanMeshIfEntry  

hh3cDot11WlanMeshIfNumber 1.3.6.1.4.1.25506.2.75.4.6.5.1.1
This node represents the WLAN mesh interface number.
OBJECT-TYPE    
  Integer32  

hh3cDot11WlanMeshIfIndex 1.3.6.1.4.1.25506.2.75.4.6.5.1.2
This node represents the index of WLAN mesh interface.
OBJECT-TYPE    
  Integer32  

hh3cDot11WlanMeshRowStatus 1.3.6.1.4.1.25506.2.75.4.6.5.1.3
This node represents the WLAN mesh interface row status.
OBJECT-TYPE    
  RowStatus  

hh3cDot11BackupACAdrssIP 1.3.6.1.4.1.25506.2.75.4.7.1
This object represents the backup AC IP address. If the backup AC IP address is not configured, the object value is 0.0.0.0.
OBJECT-TYPE    
  InetAddress  

hh3cDot11BackupACAdrssIPv6 1.3.6.1.4.1.25506.2.75.4.7.2
This object represents the backup AC IPv6 address. If the backup AC IPv6 address is not configured, the object value is 0::0.
OBJECT-TYPE    
  InetAddress  

hh3cDot11nRadioCfgTable 1.3.6.1.4.1.25506.2.75.4.8.1
This table is used to configure dot11n on the radio.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11nRadioCfgEntry

hh3cDot11nRadioCfgEntry 1.3.6.1.4.1.25506.2.75.4.8.1.1
This entry contains the dot11n configuration on the radio.
OBJECT-TYPE    
  Hh3cDot11nRadioCfgEntry  

hh3cDot11nRadioCfgIndex 1.3.6.1.4.1.25506.2.75.4.8.1.1.1
Represents index of the radio.
OBJECT-TYPE    
  Hh3cDot11RadioElementIndex  

hh3cDot11nAMpduEnable 1.3.6.1.4.1.25506.2.75.4.8.1.1.2
Enable the function of A-MPDU.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nAMsduEnable 1.3.6.1.4.1.25506.2.75.4.8.1.1.3
Enable the function of A-MSDU.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nClientDot11nOnly 1.3.6.1.4.1.25506.2.75.4.8.1.1.4
If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nChanelBand 1.3.6.1.4.1.25506.2.75.4.8.1.1.5
Specify the bandwidth mode.
OBJECT-TYPE    
  INTEGER mode20(1), mode40(2), mode80(3)  

hh3cDot11nShortGiEnable 1.3.6.1.4.1.25506.2.75.4.8.1.1.6
The function of Short GI.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nClientDot11acOnly 1.3.6.1.4.1.25506.2.75.4.8.1.1.7
Only permit clients of 11ac mode.
OBJECT-TYPE    
  TruthValue  

hh3cDot11RadioWDSTable 1.3.6.1.4.1.25506.2.75.4.8.2
This table is used to configure WDS on the radio.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11RadioWDSEntry

hh3cDot11RadioWDSEntry 1.3.6.1.4.1.25506.2.75.4.8.2.1
Each entry contains the WDS configuration on the radio.
OBJECT-TYPE    
  Hh3cDot11RadioWDSEntry  

hh3cDot11RadioWDSIndex 1.3.6.1.4.1.25506.2.75.4.8.2.1.1
Represents the element index of radio.
OBJECT-TYPE    
  Hh3cDot11RadioElementIndex  

hh3cDot11RadioWDSMode 1.3.6.1.4.1.25506.2.75.4.8.2.1.2
Represents enable the WDS mode or not. nowds: The WDS mode is disabled. wds : The WDS mode is enabled
OBJECT-TYPE    
  INTEGER nowds(1), wds(2)  

hh3cDot11RadioWDSNetWorkID 1.3.6.1.4.1.25506.2.75.4.8.2.1.3
Represents the mesh ID of WDS.
OBJECT-TYPE    
  STRING Size(0..32)  

hh3cDot11WDSSecPskKeyMode 1.3.6.1.4.1.25506.2.75.4.8.2.1.4
Represents the PSK mode of WDS.
OBJECT-TYPE    
  INTEGER pskKeyModeNone(1), pskKeyModePassPhrase(2), pskKeyModeRawKey(3)  

hh3cDot11WDSSecPskKeyString 1.3.6.1.4.1.25506.2.75.4.8.2.1.5
Represents the PSK value of WDS.
OBJECT-TYPE    
  DisplayString  

hh3cDot11nRadioCfg2Table 1.3.6.1.4.1.25506.2.75.4.8.3
This table is used to configure dot11n on the radio.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11nRadioCfg2Entry

hh3cDot11nRadioCfg2Entry 1.3.6.1.4.1.25506.2.75.4.8.3.1
This entry contains the dot11n configuration on the radio.
OBJECT-TYPE    
  Hh3cDot11nRadioCfg2Entry  

hh3cDot11nRadioCfg2APIDIndex 1.3.6.1.4.1.25506.2.75.4.8.3.1.1
Represents index of the AP.
OBJECT-TYPE    
  Hh3cDot11ObjectIDType  

hh3cDot11nRadioCfg2RadioIDIndex 1.3.6.1.4.1.25506.2.75.4.8.3.1.2
Represents index of the radio.
OBJECT-TYPE    
  Hh3cDot11RadioScopeType  

hh3cDot11nRadioCfg2AMpduEnable 1.3.6.1.4.1.25506.2.75.4.8.3.1.3
Enable the function of A-MPDU.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nRadioCfg2AMsduEnable 1.3.6.1.4.1.25506.2.75.4.8.3.1.4
Enable the function of A-MSDU.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nRadioCfg2ClientDot11nOnly 1.3.6.1.4.1.25506.2.75.4.8.3.1.5
If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nRadioCfg2ChannelBand 1.3.6.1.4.1.25506.2.75.4.8.3.1.6
Specify the bandwidth mode.
OBJECT-TYPE    
  INTEGER mode20(1), mode40(2), mode80(3)  

hh3cDot11nRadioCfg2ShortGiEnable 1.3.6.1.4.1.25506.2.75.4.8.3.1.7
Enable the function of Short GI.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nRadioCfg2AMpduEnableCM 1.3.6.1.4.1.25506.2.75.4.8.3.1.8
Enable the function of A-MPDU.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hh3cDot11nRadioCfg2ChannelBandCM 1.3.6.1.4.1.25506.2.75.4.8.3.1.9
Specify the bandwidth mode.
OBJECT-TYPE    
  INTEGER mode40(1), mode20(2)  

hh3cDot11nRadioCfg2ShortGiEnableCM 1.3.6.1.4.1.25506.2.75.4.8.3.1.10
Enable the function of Short GI.
OBJECT-TYPE    
  INTEGER off(0), on(1)  

hh3cDot11nRadioCfg2ClientDot11acOnly 1.3.6.1.4.1.25506.2.75.4.8.3.1.11
Only permit clients of 11ac mode.
OBJECT-TYPE    
  TruthValue  

hh3cDot11nRadioCfg2ClientDot11nOnlyCM 1.3.6.1.4.1.25506.2.75.4.8.3.1.12
If radio type is 802.11an or 802.11gn, permit only clients of 11n mode. If radio type is 802.11ac, permit clients of both 11n and 11ac mode.
OBJECT-TYPE    
  Hh3cDot11TruthValueCM  

hh3cDot11CfgNotifications 1.3.6.1.4.1.25506.2.75.4.9.0
OBJECT IDENTIFIER    

hh3cDot11CfgCipherChange 1.3.6.1.4.1.25506.2.75.4.9.0.1
This notification is sent when cipher type of corresponding service template is changed.
NOTIFICATION-TYPE    

hh3cDot11CfgPSKChange 1.3.6.1.4.1.25506.2.75.4.9.0.2
This notification is sent when pre-shared key of corresponding service template is changed.
NOTIFICATION-TYPE    

hh3cDot11SSIDWepIDConflictTrap 1.3.6.1.4.1.25506.2.75.4.9.0.3
This notification will be sent when the same wep ID is configured on two service policies.
NOTIFICATION-TYPE    

hh3cDot11CfgTrapVarObjects 1.3.6.1.4.1.25506.2.75.4.9.1
OBJECT IDENTIFIER    

hh3cDot11PreConflictTemplateNum 1.3.6.1.4.1.25506.2.75.4.9.1.1
Represents previous service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration.
OBJECT-TYPE    
  Integer32 1..1024  

hh3cDot11CurrConflictTemplateNum 1.3.6.1.4.1.25506.2.75.4.9.1.2
Represents current service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration.
OBJECT-TYPE    
  Integer32 1..1024  

hh3cDot11ConflictCipherIdx 1.3.6.1.4.1.25506.2.75.4.9.1.3
Represents wep ID that conflicted with.
OBJECT-TYPE    
  Integer32 1..4  

hh3cDot11ConfigureAPID 1.3.6.1.4.1.25506.2.75.4.9.1.4
Represents which AP is configured.
OBJECT-TYPE    
  Hh3cDot11ObjectIDType  

hh3cDot11ConfigureRadioID 1.3.6.1.4.1.25506.2.75.4.9.1.5
Represents which radio in AP is configured.
OBJECT-TYPE    
  Hh3cDot11RadioScopeType  

hh3cDot11ConfigureAPMacAddress 1.3.6.1.4.1.25506.2.75.4.9.1.6
Represents MAC Address of AP.
OBJECT-TYPE    
  MacAddress