HH3C-DOT11-ACMT-MIB

File: HH3C-DOT11-ACMT-MIB.mib (51123 bytes)

Imported modules

SNMPv2-SMI IANAifType-MIB HH3C-DOT11-REF-MIB
SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter32 IpAddress
Counter64 TimeTicks IANAifType
hh3cDot11 Hh3cDot11MACModeType Hh3cDot11TunnelSecSchemType
Hh3cDot11ObjectIDType MacAddress

Defined Types

Hh3cDot11ACIFLoadInfoEntry  
SEQUENCE    
  hh3cDot11ACIfIndex Integer32
  hh3cDot11ACIfApNum Integer32
  hh3cDot11ACIfStaNum Integer32
  hh3cDot11ACIfName OCTET STRING

Hh3cDot11ACBASIfEntry  
SEQUENCE    
  hh3cDot11ACBASIfIndex Integer32
  hh3cDot11ACBASIfDescr OCTET STRING
  hh3cDot11ACBASIfType IANAifType

Hh3cDot11ACPortalStatisticCMEntry  
SEQUENCE    
  hh3cDot11ACPortalStatisticSSIDCM OCTET STRING
  hh3cDot11ACPortalStatAuthReqCM Counter32
  hh3cDot11ACPortalStatAuthRespCM Counter32

Hh3cDot11CAPWAPTunnelEntry  
SEQUENCE    
  hh3cDot11CurrTunnelAPID Hh3cDot11ObjectIDType
  hh3cDot11CtrlTunnelCurrSec Hh3cDot11TunnelSecSchemType
  hh3cDot11CtrlTunnelUpTime Integer32
  hh3cDot11DataTunnelCurrSec Hh3cDot11TunnelSecSchemType
  hh3cDot11DataTunnelUpTime Integer32
  hh3cDot11CtrlTunnelUpTimeTicks TimeTicks

Defined Values

hh3cDot11ACMT 1.3.6.1.4.1.25506.2.75.1
This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
MODULE-IDENTITY    

hh3cDot11ACObjectGroup 1.3.6.1.4.1.25506.2.75.1.1
OBJECT IDENTIFIER    

hh3cDot11ACObject 1.3.6.1.4.1.25506.2.75.1.1.1
OBJECT IDENTIFIER    

hh3cDot11ACLoadInfo 1.3.6.1.4.1.25506.2.75.1.1.2
OBJECT IDENTIFIER    

hh3cDot11WLANAssocStatisInfo 1.3.6.1.4.1.25506.2.75.1.1.3
OBJECT IDENTIFIER    

hh3cDot11ACBASInfo 1.3.6.1.4.1.25506.2.75.1.1.4
OBJECT IDENTIFIER    

hh3cDot11ACStaUserSecAuthStatis 1.3.6.1.4.1.25506.2.75.1.1.5
OBJECT IDENTIFIER    

hh3cDot11ACStaSecAuthTypeStatis 1.3.6.1.4.1.25506.2.75.1.1.6
OBJECT IDENTIFIER    

hh3cDot11CAPWAPTunnelGroup 1.3.6.1.4.1.25506.2.75.1.2
OBJECT IDENTIFIER    

hh3cDot11ACMtNotifyGroup 1.3.6.1.4.1.25506.2.75.1.3
OBJECT IDENTIFIER    

hh3cDot11CurrentACMACMode 1.3.6.1.4.1.25506.2.75.1.1.1.1
Represents which MAC mode defined in the CAPWAP draft is in use for the AC.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cDot11MACModeType  

hh3cDot11MaxAPNumPermitted 1.3.6.1.4.1.25506.2.75.1.1.1.2
Represents the maximum number of AP connection permitted for one AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11MaxStationNumPermitted 1.3.6.1.4.1.25506.2.75.1.1.1.3
Represents the maximum number of station connection permitted for one AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11RunAPNumThreshold 1.3.6.1.4.1.25506.2.75.1.1.1.4
When the percentage of run AP number is larger than this threshold, a notification will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..100  

hh3cDot11APConnectCount 1.3.6.1.4.1.25506.2.75.1.1.2.1
Represents the total number of APs which are connecting to AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11StationConnectCount 1.3.6.1.4.1.25506.2.75.1.1.2.2
Represents the total number of stations which are accessing the WLAN service through AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACIFLoadInfoTable 1.3.6.1.4.1.25506.2.75.1.1.2.3
Represents AP number information of interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11ACIFLoadInfoEntry

hh3cDot11ACIFLoadInfoEntry 1.3.6.1.4.1.25506.2.75.1.1.2.3.1
Each entry represents AP number information of an interface
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11ACIFLoadInfoEntry  

hh3cDot11ACIfIndex 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.1
Represents index of AC interface.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cDot11ACIfApNum 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.2
Represents AP number connected to the AC interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACIfStaNum 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.3
Represents Station number connected to the AC interface.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACIfName 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.4
Represents InterfaceName AP number connected to AC interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

hh3cDot11MasterAPCount 1.3.6.1.4.1.25506.2.75.1.1.2.4
Represents the total number of AP which have established the master tunnel with AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11SlaveAPCount 1.3.6.1.4.1.25506.2.75.1.1.2.5
Represents the total number of AP which have established the slave tunnel with AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ConnectAutoAPCount 1.3.6.1.4.1.25506.2.75.1.1.2.6
Represents the total number of auto APs that are connecting to AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11PersistentAPCount 1.3.6.1.4.1.25506.2.75.1.1.2.7
Represents the total number of persistent AP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11AcUploadFrameCnt 1.3.6.1.4.1.25506.2.75.1.1.2.8
Represents the number of frames that AP sends to AC through LWAPP tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cDot11AcDownloadFrameCnt 1.3.6.1.4.1.25506.2.75.1.1.2.9
Represents the number of frames that AC sends to AP through LWAPP tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cDot11AcUploadFrameBytes 1.3.6.1.4.1.25506.2.75.1.1.2.10
Represents the bytes of frames that AP sends to AC through LWAPP tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cDot11AcDownloadFrameBytes 1.3.6.1.4.1.25506.2.75.1.1.2.11
Represents the bytes of frames that AC sends to AP through LWAPP tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cDot11BackupACRole 1.3.6.1.4.1.25506.2.75.1.1.2.12
This object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER null(1), master(2), slave(3)  

hh3cDot11BackupACNMSIP 1.3.6.1.4.1.25506.2.75.1.1.2.13
This object represents the manger IP address of the slave ac.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

hh3cDot11ACBackupMode 1.3.6.1.4.1.25506.2.75.1.1.2.14
This object represents the ac backup mode.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER null(1), hotBackup(2), coldBackup(3)  

hh3cDot11ACBackupStatus 1.3.6.1.4.1.25506.2.75.1.1.2.15
This object represents the ac backup status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2)  

hh3cDot11ACSwitchCnt 1.3.6.1.4.1.25506.2.75.1.1.2.16
This object represents the ac switch times.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACSouthifPacketOutputCount 1.3.6.1.4.1.25506.2.75.1.1.2.17
Represents the count of output packets with the down-link interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cDot11ACSouthifPacketOutputBytes 1.3.6.1.4.1.25506.2.75.1.1.2.18
Represents the bytes of output packets with the down-link interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cDot11ACSouthifPacketInputCount 1.3.6.1.4.1.25506.2.75.1.1.2.19
Represents the count of input packets with the down-link interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cDot11ACSouthifPacketInputBytes 1.3.6.1.4.1.25506.2.75.1.1.2.20
Represents the bytes of input packets with the down-link interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

hh3cDot11TotalAPconnected 1.3.6.1.4.1.25506.2.75.1.1.2.21
Represents the total number of AP which are connected to AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11RemainingAPcapacity 1.3.6.1.4.1.25506.2.75.1.1.2.22
Represents the remaining AP capacity of the AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11StationAssocSum 1.3.6.1.4.1.25506.2.75.1.1.3.1
Represents the total number of station association.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11StationAssocFailSum 1.3.6.1.4.1.25506.2.75.1.1.3.2
Represents the total number of station association failure.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11StationReassocSum 1.3.6.1.4.1.25506.2.75.1.1.3.3
Represents the total number of station reassociation.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11StationAssocRejectedSum 1.3.6.1.4.1.25506.2.75.1.1.3.4
Represents the total number of station association rejected on account of resource limit.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11StationExDeAuthenSum 1.3.6.1.4.1.25506.2.75.1.1.3.5
Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11StationCurAssocSum 1.3.6.1.4.1.25506.2.75.1.1.3.6
Represents the total number of current associated stations.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11StationAssocReqSum 1.3.6.1.4.1.25506.2.75.1.1.3.7
Represents the total number of station association request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11StationReassocReqSum 1.3.6.1.4.1.25506.2.75.1.1.3.8
Represents the total number of station reassociation request.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11StationReassocFailSum 1.3.6.1.4.1.25506.2.75.1.1.3.9
Represents the total number of station reassociation failure.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACBASSysObjects 1.3.6.1.4.1.25506.2.75.1.1.4.1
OBJECT IDENTIFIER    

hh3cDot11ACBASTableObjects 1.3.6.1.4.1.25506.2.75.1.1.4.2
OBJECT IDENTIFIER    

hh3cDot11ACBASIfTable 1.3.6.1.4.1.25506.2.75.1.1.4.2.3
Represents the BAS information of interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11ACBASIfEntry

hh3cDot11ACBASIfEntry 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1
Each entry represents the BAS information of an interface
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11ACBASIfEntry  

hh3cDot11ACBASIfIndex 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.1
The ifIndex of the BAS interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

hh3cDot11ACBASIfDescr 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.2
A textual string containing information about the BAS interface.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

hh3cDot11ACBASIfType 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.3
The type of the BAS interface.
Status: current Access: read-only
OBJECT-TYPE    
  IANAifType  

hh3cDot11ACStaUserAuthCurNumber 1.3.6.1.4.1.25506.2.75.1.1.5.1
Represents the current number of user authenticated with this AC.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACStaUserConnFailCnt 1.3.6.1.4.1.25506.2.75.1.1.5.2
Represents the total number of user disconnected with this AC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserAuthReqCnt 1.3.6.1.4.1.25506.2.75.1.1.5.3
Represents the total number of user authenticate request with this AC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserAuthSuccCnt 1.3.6.1.4.1.25506.2.75.1.1.5.4
Represents the total number of users authenticated successful with this AC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserAuthFailCnt 1.3.6.1.4.1.25506.2.75.1.1.5.5
Represents the total number of user authenticated failed with this AC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserAllAuthCntCM 1.3.6.1.4.1.25506.2.75.1.1.5.6
Represents the total number of users authenticated with this AC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserPortalOnlineNum 1.3.6.1.4.1.25506.2.75.1.1.6.1
Represents the number of online portal users authenticated by RADIUS, including MAC-trigger and IMSIAuth users.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACStaUserFreeAuthOnlineNum 1.3.6.1.4.1.25506.2.75.1.1.6.2
Numbers of online user is no need authenticated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACStaUserAssociateAuthOnlineNum 1.3.6.1.4.1.25506.2.75.1.1.6.3
Represents the number of online users authenticated by associated authentication, excluding AutoAuth users.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACStaUserMacAuthOnlineNum 1.3.6.1.4.1.25506.2.75.1.1.6.4
The numbers of online user which is launched authentication by MAC address and authenticated by Radius.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACStaUserPortalLostConnectionCnt 1.3.6.1.4.1.25506.2.75.1.1.6.5
For PortalAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserFreeAuthLostConnectionCnt 1.3.6.1.4.1.25506.2.75.1.1.6.6
For FreeAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserAssociateAuthLostConnectionCnt 1.3.6.1.4.1.25506.2.75.1.1.6.7
For AssociateAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserMacAuthLostConnectionCnt 1.3.6.1.4.1.25506.2.75.1.1.6.8
For MacAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaPortalAuthReqCnt 1.3.6.1.4.1.25506.2.75.1.1.6.9
Represents PortalAuth request count after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaAssociateAuthReqCnt 1.3.6.1.4.1.25506.2.75.1.1.6.10
Represents AssociateAuth request count after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaMacAuthReqCnt 1.3.6.1.4.1.25506.2.75.1.1.6.11
Represents MacAuth request count after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaPortalAuthSuccCnt 1.3.6.1.4.1.25506.2.75.1.1.6.12
Represents count of PortalAuth authenticated successfully after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaAssociateAuthSuccCnt 1.3.6.1.4.1.25506.2.75.1.1.6.13
Represents count of AssociateAuth authenticated successfully after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaMacAuthSuccCnt 1.3.6.1.4.1.25506.2.75.1.1.6.14
Represents count of MacAuth authenticated successfully after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaPortalAuthReqFailCnt 1.3.6.1.4.1.25506.2.75.1.1.6.15
Represents count of PortalAuth failure in request after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaAssociateAuthReqFailCnt 1.3.6.1.4.1.25506.2.75.1.1.6.16
Represents count of AssociateAuth failure in request after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaMacAuthReqFailCnt 1.3.6.1.4.1.25506.2.75.1.1.6.17
Represents count of MacAuth failure in request after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaUserAutoAuthOnlineNumCM 1.3.6.1.4.1.25506.2.75.1.1.6.18
Represents the number of online users authenticated by auto authentication.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11ACStaUserAutoAuthLostConnectionCntCM 1.3.6.1.4.1.25506.2.75.1.1.6.19
Represents the disconnection count of AutoAuth users, excluding the ones who disconnect AP by themselves.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaAutoAuthReqCntCM 1.3.6.1.4.1.25506.2.75.1.1.6.20
Represents the count of AutoAuth requests after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaAutoAuthSuccCntCM 1.3.6.1.4.1.25506.2.75.1.1.6.21
Represents the count of successful AutoAuth authentications after AP up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACStaAutoAuthReqFailCntCM 1.3.6.1.4.1.25506.2.75.1.1.6.22
Represents the count of failed AutoAuth requests after AP is up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACPortalStatisticCMTable 1.3.6.1.4.1.25506.2.75.1.1.7
The table describes portal statistics information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11ACPortalStatisticCMEntry

hh3cDot11ACPortalStatisticCMEntry 1.3.6.1.4.1.25506.2.75.1.1.7.1
Each entry contains the portal statistics information of an SSID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11ACPortalStatisticCMEntry  

hh3cDot11ACPortalStatisticSSIDCM 1.3.6.1.4.1.25506.2.75.1.1.7.1.1
Represents the service policy name.
Status: current Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hh3cDot11ACPortalStatAuthReqCM 1.3.6.1.4.1.25506.2.75.1.1.7.1.2
Represents the total number of portal authentication requests from portal server to AC.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11ACPortalStatAuthRespCM 1.3.6.1.4.1.25506.2.75.1.1.7.1.3
Represents the total number of portal authentication responses from AC to portal server.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

hh3cDot11CAPWAPTunnelTable 1.3.6.1.4.1.25506.2.75.1.2.1
The table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDot11CAPWAPTunnelEntry

hh3cDot11CAPWAPTunnelEntry 1.3.6.1.4.1.25506.2.75.1.2.1.1
Each entry contains information of data tunnel and control tunnel of AP which is connecting to AC.
Status: current Access: not-accessible
OBJECT-TYPE    
  Hh3cDot11CAPWAPTunnelEntry  

hh3cDot11CurrTunnelAPID 1.3.6.1.4.1.25506.2.75.1.2.1.1.1
To uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Hh3cDot11ObjectIDType  

hh3cDot11CtrlTunnelCurrSec 1.3.6.1.4.1.25506.2.75.1.2.1.1.2
Represents what security scheme is in use for control tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cDot11TunnelSecSchemType  

hh3cDot11CtrlTunnelUpTime 1.3.6.1.4.1.25506.2.75.1.2.1.1.3
Represents how long for control tunnel up. If the value is zero, then tunnel is not set up.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11DataTunnelCurrSec 1.3.6.1.4.1.25506.2.75.1.2.1.1.4
Represents what security scheme is in use for data tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Hh3cDot11TunnelSecSchemType  

hh3cDot11DataTunnelUpTime 1.3.6.1.4.1.25506.2.75.1.2.1.1.5
Represents how long for data tunnel up. If the value is zero, then tunnel is not set up.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

hh3cDot11CtrlTunnelUpTimeTicks 1.3.6.1.4.1.25506.2.75.1.2.1.1.6
Represents how long control tunnel is up. If the value is zero, then tunnel is not set up.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

hh3cDot11ACMtTraps 1.3.6.1.4.1.25506.2.75.1.3.0
OBJECT IDENTIFIER    

hh3cDot11ACMtTunnelSetupTrap 1.3.6.1.4.1.25506.2.75.1.3.0.1
This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11ACMtTunnelDownTrap 1.3.6.1.4.1.25506.2.75.1.3.0.2
This notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11ACMtBackupSwtTrap 1.3.6.1.4.1.25506.2.75.1.3.0.3
This trap is sent by AC when AC switches from master to slave or from slave to master.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11ACLoadBalanceTrap 1.3.6.1.4.1.25506.2.75.1.3.0.4
This trap is sent by AC when load-balance is enabled on AC.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11ACStaFullTrap 1.3.6.1.4.1.25506.2.75.1.3.0.5
This notification will be sent when STA is full on AC.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11ACStatusSwitchTrap 1.3.6.1.4.1.25506.2.75.1.3.0.6
This notification will be sent when AC switches from standby to active or from standby to active.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11RunAPNumOverload 1.3.6.1.4.1.25506.2.75.1.3.0.7
The notification will be sent by AC when run AP number exceeds the threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11RunAPNumOverloadRecover 1.3.6.1.4.1.25506.2.75.1.3.0.8
The notification will be sent by AC when run AP number recover normal from overload state.
Status: current Access: read-only
NOTIFICATION-TYPE    

hh3cDot11ACMtTrapVarObjects 1.3.6.1.4.1.25506.2.75.1.3.1
OBJECT IDENTIFIER    

hh3cDot11ACMtTrapTunlDwnInfo 1.3.6.1.4.1.25506.2.75.1.3.1.1
Represents the reason for tunnel down. The following values are supported: tunnelTimeout - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure - rekey process is failed, tunnel will be broken. apReset - Administrator reset AP. apCrash - AP reboot for system crash. apDeleted - Delete AP from AC and trigger tunnel down. apCfgChange - The configuration for AP was changed.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER tunnelTimeout(1), keyUpdateFailure(2), apReset(3), apCrash(4), apDeleted(5), apCfgChange(6)  

hh3cDot11ACMtTrapTunlUpInfo 1.3.6.1.4.1.25506.2.75.1.3.1.2
Represents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER up(1)  

hh3cDot11ACMtTrapBackupSwitchInfo 1.3.6.1.4.1.25506.2.75.1.3.1.3
Represents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER masterToSlave(1), slaveToMaster(2)  

hh3cDot11ACMtTrapTnlAPName 1.3.6.1.4.1.25506.2.75.1.3.1.4
Represents name of the AP which sets up the tunnel with the AC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hh3cDot11ACMtTrapTnlAPIPAddr 1.3.6.1.4.1.25506.2.75.1.3.1.5
Represents IP address of the AP which sets up the tunnel with the AC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hh3cDot11LoadBalanceType 1.3.6.1.4.1.25506.2.75.1.3.1.6
Represents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER traffic(1), session(2)  

hh3cDot11LoadBalanceThreshold 1.3.6.1.4.1.25506.2.75.1.3.1.7
Represents the value of load balance threshold.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cDot11ACMtTrapAPIPv6Addr 1.3.6.1.4.1.25506.2.75.1.3.1.8
Represents IPv6 address of the AP which sets up the tunnel with the AC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hh3cDot11ACMtTrapTunlDwnCount 1.3.6.1.4.1.25506.2.75.1.3.1.9
Represents how many times that the tunnel between AC and AP has down.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cDot11ACMaxStaNum 1.3.6.1.4.1.25506.2.75.1.3.1.10
Represents the max number of STA on AC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

hh3cDot11ACMtTrapTnlAPSysName 1.3.6.1.4.1.25506.2.75.1.3.1.11
Represents system name of the AP which sets up the tunnel with the AC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING  

hh3cDot11ACMtFirstTrapTime 1.3.6.1.4.1.25506.2.75.1.3.1.12
Represents the first trap time.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TimeTicks  

hh3cDot11ACStatusSwitchInfo 1.3.6.1.4.1.25506.2.75.1.3.1.13
Represents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER activeToStandby(1), standbyToActive(2)  

hh3cDot11SourceACNmsIP 1.3.6.1.4.1.25506.2.75.1.3.1.14
Represents the NMS IP address of master AC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

hh3cDot11ACMtTrapAPMacAddress 1.3.6.1.4.1.25506.2.75.1.3.1.15
Represents the MAC address of an AP.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress