HH3C-DISK-MIB

File: HH3C-DISK-MIB.mib (8357 bytes)

Imported modules

SNMPv2-SMI HH3C-STORAGE-REF-MIB

Imported symbols

Integer32 OBJECT-TYPE MODULE-IDENTITY
hh3cStorageRef Hh3cStorageEnableState Hh3cStorageActionType

Defined Types

Hh3cDiskEntry  
SEQUENCE    
  hh3cDiskIndex Integer32
  hh3cDiskPortType INTEGER
  hh3cDiskPortSpeed Integer32
  hh3cDiskSize Integer32
  hh3cDiskFreeSpace Integer32
  hh3cDiskLocationState Hh3cStorageEnableState
  hh3cDiskRunLedState INTEGER
  hh3cDiskFaultLedState INTEGER
  hh3cDiskInitialize Hh3cStorageActionType
  hh3cDiskGlobalSpare INTEGER
  hh3cDiskLocalSpare INTEGER
  hh3cDiskReadCache Hh3cStorageEnableState
  hh3cDiskWriteCache Hh3cStorageEnableState
  hh3cDiskPowerOffReason INTEGER

Defined Values

hh3cDisk 1.3.6.1.4.1.25506.10.3
This MIB describes the general information of disk device, include the running status, disk interface, and chche management.
MODULE-IDENTITY    

hh3cDiskMibObjects 1.3.6.1.4.1.25506.10.3.1
OBJECT IDENTIFIER    

hh3cDiskTable 1.3.6.1.4.1.25506.10.3.1.1
This table contains some entity extend information of the disk.
OBJECT-TYPE    
  SEQUENCE OF  
    Hh3cDiskEntry

hh3cDiskEntry 1.3.6.1.4.1.25506.10.3.1.1.1
An entry containing management information applicable to the disk.
OBJECT-TYPE    
  Hh3cDiskEntry  

hh3cDiskIndex 1.3.6.1.4.1.25506.10.3.1.1.1.1
This object identifies the entity index of disk. The object identified by this index is the same object as identified by the same value of entPhysicalIndex.
OBJECT-TYPE    
  Integer32  

hh3cDiskPortType 1.3.6.1.4.1.25506.10.3.1.1.1.2
This object describes the interface type of disk. The value 'sata' means serial advanced technology attachment. The value 'pata' means parallel advanced technology attachment. The value 'sas' means serial attached SCSI. The value 'scsi' means small computer system interface. The value 'ieee1394' means a type of bus standard. The value 'fcal' means fiber channel arbitrated loop.
OBJECT-TYPE    
  INTEGER sata(1), pata(2), sas(3), scsi(4), ieee1394(5), fcal(6)  

hh3cDiskPortSpeed 1.3.6.1.4.1.25506.10.3.1.1.1.3
This object identifies the speed of disk interface. The units is million bytes per second.
OBJECT-TYPE    
  Integer32  

hh3cDiskSize 1.3.6.1.4.1.25506.10.3.1.1.1.4
This object describes the size of disk's total space. The units is million bytes.
OBJECT-TYPE    
  Integer32  

hh3cDiskFreeSpace 1.3.6.1.4.1.25506.10.3.1.1.1.5
This object describes the size of spare space of the disk. The units is million bytes.
OBJECT-TYPE    
  Integer32  

hh3cDiskLocationState 1.3.6.1.4.1.25506.10.3.1.1.1.6
This object identifies if the led used to confirm the position of disk is enable.
OBJECT-TYPE    
  Hh3cStorageEnableState  

hh3cDiskRunLedState 1.3.6.1.4.1.25506.10.3.1.1.1.7
This object identifies the runing state of the disk. The value of 'on' means the blue led is on, and the disk works well. The value of 'blink' means the blue led is blinking, and the disk is being readed or writed. The value of 'fastblink' means the blue led is blinking very fast, and the disk is being located. This object can not be 'fastblink' when the value of associated hh3cDiskLocationState object is equal to 'disable'.
OBJECT-TYPE    
  INTEGER on(1), blink(2), fastblink(3)  

hh3cDiskFaultLedState 1.3.6.1.4.1.25506.10.3.1.1.1.8
This object identifies the fault state of the disk. The value of 'off' means the yellow led is go out, and the disk works well. The value of 'on' means the yellow led is on, and the disk break down. The value of 'blink' means the yellow led is blinking, and a group of raid disk is being synchronized.
OBJECT-TYPE    
  INTEGER off(1), on(2), blink(3)  

hh3cDiskInitialize 1.3.6.1.4.1.25506.10.3.1.1.1.9
The operation of initialize the disk. When the value of this object is set to 'action', the operation of disk initialize are touched off.
OBJECT-TYPE    
  Hh3cStorageActionType  

hh3cDiskGlobalSpare 1.3.6.1.4.1.25506.10.3.1.1.1.10
This object identifies if the disk is a global hot spare disk. The value 'globalSpare' means it is a global spare disk, and the value 'nonglobalSpare' means not.
OBJECT-TYPE    
  INTEGER globalSpare(1), nonglobalSpare(2)  

hh3cDiskLocalSpare 1.3.6.1.4.1.25506.10.3.1.1.1.11
This object identifies if the disk is a specific hot spare disk. The value 'localSpare' means it is a local spare disk, and 'nonlocalSpare' means not.
OBJECT-TYPE    
  INTEGER localSpare(1), nonlocalSpare(2)  

hh3cDiskReadCache 1.3.6.1.4.1.25506.10.3.1.1.1.12
This object identifies the state of read cache.
OBJECT-TYPE    
  Hh3cStorageEnableState  

hh3cDiskWriteCache 1.3.6.1.4.1.25506.10.3.1.1.1.13
This object identifies the state of write cache.
OBJECT-TYPE    
  Hh3cStorageEnableState  

hh3cDiskPowerOffReason 1.3.6.1.4.1.25506.10.3.1.1.1.14
This object describes the reason of disk poweroff. The value 'environmentUnstable' means disk poweroff and may poweron again. The value 'mediumError' means disk poweroff and never poweron. The value 'smartCheckError' means disk's SMART check failed and poweroff. The value 'generalError' means disk poweroff because of general error.
OBJECT-TYPE    
  INTEGER environmentUnstable(1), mediumError(2), smartCheckError(3), generalError(4)