HH3C-ARP-RATELIMIT-MIB
File:
HH3C-ARP-RATELIMIT-MIB.mib (5568 bytes)
Imported modules
Imported symbols
Defined Types
Defined Values
| hh3cARPRatelimit |
1.3.6.1.4.1.25506.2.110 |
| This MIB file defines the ARP packet rate limit configuration.
The ARP packet rate limit feature monitors and controls the
rate of ARP packets delivered to the CPU on a device. The
current version supports the monitoring feature only. |
| MODULE-IDENTITY |
|
|
|
| hh3cARPRatelimitOverspeedTrap |
1.3.6.1.4.1.25506.2.110.1.1.0.1 |
| If the rate of ARP packets delivered to the CPU on a device
exceeds the threshold, a trap message is generated and sent
to the remote monitoring device. |
| Status: current |
Access: accessible-for-notify |
| NOTIFICATION-TYPE |
|
|
|
| hh3cARPRatelimitTrapCount |
1.3.6.1.4.1.25506.2.110.1.1.1.2 |
| Number of cells in the trap message. A trap message may contain
multiple cells, each of which indicates that the rate information of
ARP packets exceeds the threshold. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| hh3cARPRatelimitTrapMsg |
1.3.6.1.4.1.25506.2.110.1.1.1.3 |
| This object is the cell section in a trap message sent from a
monitored device. This object can contain multiple cells.
This object is in the format of '...'. Each cell
consists of 17 octets in the format of
''.
indicates the source of the trap message and has
size of 1 octet. It only supports the following values.
1 - Global.
2 - Interface.
is the index of the interface where the rate of ARP packet
exceeds the threshold and has size of 4 octets. It is 0xFFFFFFFF
when is 1(Global).
indicates the rate that ARP packets are actually
delivered and has size of 4 octets.
indicates the threshold that ARP packets can be delivered
to CPU and has size of 4 octets.
indicates the interval that a trap message is sent out
and has size of 4 octets. |
| Status: current |
Access: accessible-for-notify |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(1..254) |
|
| hh3cARPRatelimitConfigEntry |
1.3.6.1.4.1.25506.2.110.1.2.1.1 |
| The entry of hh3cARPRatelimitConfigTable. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Hh3cARPRatelimitConfigEntry |
|
|
| hh3cARPRatelimitValue |
1.3.6.1.4.1.25506.2.110.1.2.1.1.1 |
| Configure ARP packet rate limit. Support for the value range
depends on the device model. If the object is set to 0, the ARP
packet rate limit will be disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|