H3C-STORAGE-SNAP-MIB

File: H3C-STORAGE-SNAP-MIB.mib (58028 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
ENTITY-MIB H3C-STORAGE-REF-MIB

Imported symbols

Counter32 Integer32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE TEXTUAL-CONVENTION
TruthValue DateAndTime RowStatus
InetAddressType InetAddress entPhysicalIndex
H3cStorageOnlineState H3cStorageEnableState H3cStorageActionType
H3cLvIDType H3cRaidIDType H3cExtendSelectPolicy
h3cStorageRef

Defined Types

H3cSnapConfigEntry  
SEQUENCE    
  h3cSnapLvIndex H3cLvIDType
  h3cSnapAreaId H3cLvIDType
  h3cSnapAreaAutoExpand H3cStorageEnableState
  h3cSnapAreaThreshold Integer32
  h3cSnapAreaIncSize Integer32
  h3cSnapAreaMaxSize Integer32
  h3cSnapAreaFullDeleteTM INTEGER
  h3cSnapAreaNotify H3cStorageEnableState
  h3cSnapAreaStatus H3cStorageOnlineState
  h3cSnapRaidUuid H3cRaidIDType
  h3cSnapRaidSize Integer32
  h3cSnapRaidSelectPolicy H3cExtendSelectPolicy
  h3cSnapAreaTotalSize Integer32
  h3cSnapAreaFreeSize Integer32
  h3cSnapExtendTimes Integer32
  h3cSnapRowStatus RowStatus

H3cSnapExpandEntry  
SEQUENCE    
  h3cSAExpRaidUuid H3cRaidIDType
  h3cSAExpSize Integer32
  h3cSAExpRaidSize Integer32
  h3cSnapAreaExpRowStatus RowStatus

H3cSnapCopyEntry  
SEQUENCE    
  h3cSnapCopyLvIndex H3cLvIDType
  h3cSnapCopyPercentage Integer32
  h3cSnapCopyStartTime DateAndTime
  h3cSnapCopySwitch INTEGER

H3cTimeMarkConfigEntry  
SEQUENCE    
  h3cTimeMarkCounts Integer32
  h3cTimeMarkInitializeTime DateAndTime
  h3cTimeMarkInterval Integer32
  h3cTimeMarkLastTime DateAndTime
  h3cTimeMarkTotal Integer32
  h3cTimeMarkSwitch H3cStorageEnableState

H3cTimeMarkCreateEntry  
SEQUENCE    
  h3cTimeMarkStamp DateAndTime
  h3cTimeMarkComment STRING
  h3cTimeMarkSize Integer32
  h3cTimeMarkRowStatus RowStatus

H3cTimeMarkCopyEntry  
SEQUENCE    
  h3cTMCopyDestLvId H3cLvIDType
  h3cTMCopyPercentage Integer32
  h3cTMCopyStartTime DateAndTime
  h3cTMCopySwitch INTEGER

H3cTimeMarkRollbackEntry  
SEQUENCE    
  h3cTMRollbackPercentage Integer32
  h3cTMRollbackStartTime DateAndTime
  h3cTMRollbackSwitch H3cStorageActionType

H3cTimeViewEntry  
SEQUENCE    
  h3cTimeViewStamp DateAndTime
  h3cTimeViewID H3cLvIDType
  h3cTimeViewName STRING
  h3cTimeViewRowStatus RowStatus

H3cReplicaConfigEntry  
SEQUENCE    
  h3cRepLocalLvIndex H3cLvIDType
  h3cLvRepLocalWay INTEGER
  h3cRepLocalServerIP InetAddress
  h3cRepLocalServerIPType InetAddressType
  h3cRepLocalServerName STRING
  h3cRepLocalServerUsername STRING
  h3cRepLocalServerPassword STRING
  h3cRepRemoteServerIP InetAddress
  h3cRepRemoteServerIPType InetAddressType
  h3cRepRemoteServerName STRING
  h3cRepRemoteServerUsername STRING
  h3cRepRemoteServerPassword STRING
  h3cRepRemoteLvIndex H3cLvIDType
  h3cReplicaMode INTEGER
  h3cReplicaWatermark Integer32
  h3cReplicaWatermarkRetry Integer32
  h3cReplicaInitializeTime DateAndTime
  h3cReplicaInterval Integer32
  h3cReplicaEncrypt H3cStorageEnableState
  h3cReplicaCompress H3cStorageEnableState
  h3cReplicaUseExistTM H3cStorageEnableState
  h3cReplicaProtocol INTEGER
  h3cReplicaScanDiff TruthValue
  h3cReplicaStatSwitch INTEGER
  h3cReplicaRowStatus RowStatus

H3cReplicaStateEntry  
SEQUENCE    
  h3cReplicaDelta Integer32
  h3cReplicaLastSyncTime DateAndTime
  h3cReplicaNextSyncTime DateAndTime
  h3cReplicaSyncTotalSize Integer32
  h3cReplicaSyncCurPercentage Integer32
  h3cReplicaSyncPerformance Integer32
  h3cReplicaRunStatus INTEGER

H3cCDRConfigEntry  
SEQUENCE    
  h3cCDRLvIndex H3cLvIDType
  h3cCDRID Integer32
  h3cCDRStatus H3cStorageOnlineState
  h3cCDRTotalSize Integer32
  h3cCDRFreeSize Integer32
  h3cCDRSelectPolicy H3cExtendSelectPolicy
  h3cCDRRowStatus RowStatus

H3cCDRDistributeEntry  
SEQUENCE    
  h3cCDRDistLvIndex H3cLvIDType
  h3cCDRRaidUuid H3cRaidIDType
  h3cCDRRaidSize Integer32
  h3cCDRExtRowStatus RowStatus

H3cSafeCacheConfigEntry  
SEQUENCE    
  h3cSafeCacheLvIndex H3cLvIDType
  h3cSafeCacheID Integer32
  h3cSafeCacheStatus H3cStorageOnlineState
  h3cSafeCacheTotalSize Integer32
  h3cSafeCacheFreeSize Integer32
  h3cSafeCacheSelectPolicy H3cExtendSelectPolicy
  h3cSafeCacheThreshold Integer32
  h3cSafeCacheFlushTime Integer32
  h3cSafeCacheFlushCommand Integer32
  h3cSafeCacheSkipDupWrite INTEGER
  h3cSafeCacheRunStatus INTEGER
  h3cSafeCacheSwitch INTEGER
  h3cSafeCacheRowStatus RowStatus

H3cSafeCacheDistributeEntry  
SEQUENCE    
  h3cSafeCacheDistLvIndex H3cLvIDType
  h3cSafeCacheRaidUuid H3cRaidIDType
  h3cSafeCacheRaidSize Integer32
  h3cSafeCacheExtRowStatus RowStatus

H3cMirrorConfigEntry  
SEQUENCE    
  h3cMirrorLvIndex H3cLvIDType
  h3cMirrorType INTEGER
  h3cMirrorStatus H3cStorageOnlineState
  h3cMirrorName STRING
  h3cMirrorSyncPercentage Integer32
  h3cMirrorSyncPerformance Integer32
  h3cMirrorDelta Integer32
  h3cMirrorRaidType INTEGER
  h3cMirrorSelectPolicy H3cExtendSelectPolicy
  h3cMirrorSwitch INTEGER
  h3cMirrorExtendRaidUuid H3cRaidIDType
  h3cMirrorRowStatus RowStatus

H3cMirrorDistributeEntry  
SEQUENCE    
  h3cMirrorDistLvIndex H3cLvIDType
  h3cMirrorRaidUuid H3cRaidIDType
  h3cMirrorRaidSize Integer32
  h3cMirrorExtRowStatus RowStatus

Defined Values

h3cStorageSnap 1.3.6.1.4.1.2011.10.10.2
This MIB describes the general information about snap of storage device.
MODULE-IDENTITY    

h3cSnapMibObjects 1.3.6.1.4.1.2011.10.10.2.1
OBJECT IDENTIFIER    

h3cGlobalSnapSettingsObject 1.3.6.1.4.1.2011.10.10.2.1.1
OBJECT IDENTIFIER    

h3cAddtionalSpaceMaxSize 1.3.6.1.4.1.2011.10.10.2.1.1.1
This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource .
OBJECT-TYPE    
  Integer32  

h3cSnapConfigTable 1.3.6.1.4.1.2011.10.10.2.1.2
This table contains some entity to config the snapshot resources for special logic volumes.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cSnapConfigEntry

h3cSnapConfigEntry 1.3.6.1.4.1.2011.10.10.2.1.2.1
An entry containing configuration about the snapshot resource.
OBJECT-TYPE    
  H3cSnapConfigEntry  

h3cSnapLvIndex 1.3.6.1.4.1.2011.10.10.2.1.2.1.1
This object identifies the index of h3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of h3cLvIndex.
OBJECT-TYPE    
  H3cLvIDType  

h3cSnapAreaId 1.3.6.1.4.1.2011.10.10.2.1.2.1.2
This object identifies the snapshot resource of the logic volume.
OBJECT-TYPE    
  H3cLvIDType  

h3cSnapAreaAutoExpand 1.3.6.1.4.1.2011.10.10.2.1.2.1.3
This object describes if the space of snapshot resource can be expanded automatically.
OBJECT-TYPE    
  H3cStorageEnableState  

h3cSnapAreaThreshold 1.3.6.1.4.1.2011.10.10.2.1.2.1.4
If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaThreshold' means the threshold of the snapshot resource.
OBJECT-TYPE    
  Integer32 0..100  

h3cSnapAreaIncSize 1.3.6.1.4.1.2011.10.10.2.1.2.1.5
If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the amount of space to be allocated for each expansion.
OBJECT-TYPE    
  Integer32  

h3cSnapAreaMaxSize 1.3.6.1.4.1.2011.10.10.2.1.2.1.6
If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the max size of snapshot resource.
OBJECT-TYPE    
  Integer32  

h3cSnapAreaFullDeleteTM 1.3.6.1.4.1.2011.10.10.2.1.2.1.7
This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not.
OBJECT-TYPE    
  INTEGER rotative(1), none(2)  

h3cSnapAreaNotify 1.3.6.1.4.1.2011.10.10.2.1.2.1.8
This object describes if a snapshot notification should be send to the client when the system create a timemark.
OBJECT-TYPE    
  H3cStorageEnableState  

h3cSnapAreaStatus 1.3.6.1.4.1.2011.10.10.2.1.2.1.9
This object describes the state of the snapshot resource.
OBJECT-TYPE    
  H3cStorageOnlineState  

h3cSnapRaidUuid 1.3.6.1.4.1.2011.10.10.2.1.2.1.10
This object describes the raid where the snapshot resource is created.
OBJECT-TYPE    
  H3cRaidIDType  

h3cSnapRaidSize 1.3.6.1.4.1.2011.10.10.2.1.2.1.11
This object describes the size designated when the snapshot resource is created.
OBJECT-TYPE    
  Integer32  

h3cSnapRaidSelectPolicy 1.3.6.1.4.1.2011.10.10.2.1.2.1.12
This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated h3cSnapRaidUuid object is equal to null.
OBJECT-TYPE    
  H3cExtendSelectPolicy  

h3cSnapAreaTotalSize 1.3.6.1.4.1.2011.10.10.2.1.2.1.13
This object identifies the current total size of the snapshot resource.
OBJECT-TYPE    
  Integer32  

h3cSnapAreaFreeSize 1.3.6.1.4.1.2011.10.10.2.1.2.1.14
This object identifies the free size of the snapshot resource.
OBJECT-TYPE    
  Integer32  

h3cSnapExtendTimes 1.3.6.1.4.1.2011.10.10.2.1.2.1.15
This object identifies the times the snapshot resource extended.
OBJECT-TYPE    
  Integer32  

h3cSnapRowStatus 1.3.6.1.4.1.2011.10.10.2.1.2.1.16
This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled.
OBJECT-TYPE    
  RowStatus  

h3cSnapExpandTable 1.3.6.1.4.1.2011.10.10.2.1.3
This table contains some entity to expand a snapshot resource.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cSnapExpandEntry

h3cSnapExpandEntry 1.3.6.1.4.1.2011.10.10.2.1.3.1
An entry containing expand information applicable to the snapshot resource.
OBJECT-TYPE    
  H3cSnapExpandEntry  

h3cSAExpRaidUuid 1.3.6.1.4.1.2011.10.10.2.1.3.1.1
This index is identical to h3cRaidUuid in H3C-RAID-MIB.
OBJECT-TYPE    
  H3cRaidIDType  

h3cSAExpSize 1.3.6.1.4.1.2011.10.10.2.1.3.1.2
This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read.
OBJECT-TYPE    
  Integer32  

h3cSAExpRaidSize 1.3.6.1.4.1.2011.10.10.2.1.3.1.3
This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read.
OBJECT-TYPE    
  Integer32  

h3cSnapAreaExpRowStatus 1.3.6.1.4.1.2011.10.10.2.1.3.1.4
This object describes the actions to expand the size for snap.
OBJECT-TYPE    
  RowStatus  

h3cSnapCopyTable 1.3.6.1.4.1.2011.10.10.2.1.4
This table contains some entity about snapshot copy.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cSnapCopyEntry

h3cSnapCopyEntry 1.3.6.1.4.1.2011.10.10.2.1.4.1
An entry containing snapshot copy information applicable.
OBJECT-TYPE    
  H3cSnapCopyEntry  

h3cSnapCopyLvIndex 1.3.6.1.4.1.2011.10.10.2.1.4.1.1
This object identifies the index of destination logic volume for snapshot copy.
OBJECT-TYPE    
  H3cLvIDType  

h3cSnapCopyPercentage 1.3.6.1.4.1.2011.10.10.2.1.4.1.2
This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'.
OBJECT-TYPE    
  Integer32 0..100  

h3cSnapCopyStartTime 1.3.6.1.4.1.2011.10.10.2.1.4.1.3
This object identifies the time to start the snapshot copy.
OBJECT-TYPE    
  DateAndTime  

h3cSnapCopySwitch 1.3.6.1.4.1.2011.10.10.2.1.4.1.4
This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent.
OBJECT-TYPE    
  INTEGER start(1), stop(2), none(3)  

h3cTimeMarkConfigTable 1.3.6.1.4.1.2011.10.10.2.1.5
This table contains some entity to config a TimeMark on a special logic volume.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cTimeMarkConfigEntry

h3cTimeMarkConfigEntry 1.3.6.1.4.1.2011.10.10.2.1.5.1
An entry containing config information applicable to the TimeMark.
OBJECT-TYPE    
  H3cTimeMarkConfigEntry  

h3cTimeMarkCounts 1.3.6.1.4.1.2011.10.10.2.1.5.1.1
This object identifies the max num of TimeMark which can be configed.
OBJECT-TYPE    
  Integer32 1..255  

h3cTimeMarkInitializeTime 1.3.6.1.4.1.2011.10.10.2.1.5.1.2
This object identifies the date and time when the first TimeMark is created on the logic volume.
OBJECT-TYPE    
  DateAndTime  

h3cTimeMarkInterval 1.3.6.1.4.1.2011.10.10.2.1.5.1.3
This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds.
OBJECT-TYPE    
  Integer32  

h3cTimeMarkLastTime 1.3.6.1.4.1.2011.10.10.2.1.5.1.4
This object identifies the date and time when the latest TimeMark is created on the logic volume.
OBJECT-TYPE    
  DateAndTime  

h3cTimeMarkTotal 1.3.6.1.4.1.2011.10.10.2.1.5.1.5
This object identifies the current num of TimeMark.
OBJECT-TYPE    
  Integer32  

h3cTimeMarkSwitch 1.3.6.1.4.1.2011.10.10.2.1.5.1.6
This object describes enable or disable TimeMark.
OBJECT-TYPE    
  H3cStorageEnableState  

h3cTimeMarkCreateTable 1.3.6.1.4.1.2011.10.10.2.1.6
This table contains some entity to create a TimeMark on a special logic volume.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cTimeMarkCreateEntry

h3cTimeMarkCreateEntry 1.3.6.1.4.1.2011.10.10.2.1.6.1
An entry containing create information applicable to the TimeMark.
OBJECT-TYPE    
  H3cTimeMarkCreateEntry  

h3cTimeMarkStamp 1.3.6.1.4.1.2011.10.10.2.1.6.1.1
This object identifies the date and time the TimeMark is created.
OBJECT-TYPE    
  DateAndTime  

h3cTimeMarkComment 1.3.6.1.4.1.2011.10.10.2.1.6.1.2
This object identifies the comment of the TimeMark.
OBJECT-TYPE    
  STRING  

h3cTimeMarkSize 1.3.6.1.4.1.2011.10.10.2.1.6.1.3
This object identifies the current size of the TimeMark.
OBJECT-TYPE    
  Integer32  

h3cTimeMarkRowStatus 1.3.6.1.4.1.2011.10.10.2.1.6.1.4
This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using.
OBJECT-TYPE    
  RowStatus  

h3cTimeMarkCopyTable 1.3.6.1.4.1.2011.10.10.2.1.7
This table contains some entity about a TimeMark copy.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cTimeMarkCopyEntry

h3cTimeMarkCopyEntry 1.3.6.1.4.1.2011.10.10.2.1.7.1
An entry containing config information applicable to the TimeMark copy.
OBJECT-TYPE    
  H3cTimeMarkCopyEntry  

h3cTMCopyDestLvId 1.3.6.1.4.1.2011.10.10.2.1.7.1.1
This object identifies the index of destination logic volume for TimeMark copy.
OBJECT-TYPE    
  H3cLvIDType  

h3cTMCopyPercentage 1.3.6.1.4.1.2011.10.10.2.1.7.1.2
This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'.
OBJECT-TYPE    
  Integer32 0..100  

h3cTMCopyStartTime 1.3.6.1.4.1.2011.10.10.2.1.7.1.3
This object identifies the time to start the TimeMark copy.
OBJECT-TYPE    
  DateAndTime  

h3cTMCopySwitch 1.3.6.1.4.1.2011.10.10.2.1.7.1.4
This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get.
OBJECT-TYPE    
  INTEGER start(1), stop(2), none(3)  

h3cTimeMarkRollbackTable 1.3.6.1.4.1.2011.10.10.2.1.8
This table contains some entity to use a TimeMark to rollback the logic volume.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cTimeMarkRollbackEntry

h3cTimeMarkRollbackEntry 1.3.6.1.4.1.2011.10.10.2.1.8.1
An entry containing config information applicable to use a TimeMark to rollback the logic volume.
OBJECT-TYPE    
  H3cTimeMarkRollbackEntry  

h3cTMRollbackPercentage 1.3.6.1.4.1.2011.10.10.2.1.8.1.1
This object identifies the percentage of rollback.
OBJECT-TYPE    
  Integer32 0..100  

h3cTMRollbackStartTime 1.3.6.1.4.1.2011.10.10.2.1.8.1.2
This object identifies the time to start the rollback.
OBJECT-TYPE    
  DateAndTime  

h3cTMRollbackSwitch 1.3.6.1.4.1.2011.10.10.2.1.8.1.3
This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted.
OBJECT-TYPE    
  H3cStorageActionType  

h3cTimeViewTable 1.3.6.1.4.1.2011.10.10.2.1.9
This table contains some entity to config a TimeView on a special TimeMark.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cTimeViewEntry

h3cTimeViewEntry 1.3.6.1.4.1.2011.10.10.2.1.9.1
An entry containing config information applicable to the TimeView.
OBJECT-TYPE    
  H3cTimeViewEntry  

h3cTimeViewStamp 1.3.6.1.4.1.2011.10.10.2.1.9.1.1
This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of h3cTimeMarkStamp.
OBJECT-TYPE    
  DateAndTime  

h3cTimeViewID 1.3.6.1.4.1.2011.10.10.2.1.9.1.2
This object identifies the TimeView.
OBJECT-TYPE    
  H3cLvIDType  

h3cTimeViewName 1.3.6.1.4.1.2011.10.10.2.1.9.1.3
This object identifies the name of the TimeView.
OBJECT-TYPE    
  STRING  

h3cTimeViewRowStatus 1.3.6.1.4.1.2011.10.10.2.1.9.1.4
This object describes the actions to create or delete the TimeView.
OBJECT-TYPE    
  RowStatus  

h3cReplicaConfigTable 1.3.6.1.4.1.2011.10.10.2.1.10
This table contains some entity to config replication for a logic volume.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cReplicaConfigEntry

h3cReplicaConfigEntry 1.3.6.1.4.1.2011.10.10.2.1.10.1
An entry containing config information applicable to the replication for a logic volume.
OBJECT-TYPE    
  H3cReplicaConfigEntry  

h3cRepLocalLvIndex 1.3.6.1.4.1.2011.10.10.2.1.10.1.1
This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of h3cSnapLvIndex.
OBJECT-TYPE    
  H3cLvIDType  

h3cLvRepLocalWay 1.3.6.1.4.1.2011.10.10.2.1.10.1.2
The value of 'outgoing' means the h3cRepLocalLvIndex is the primary logic volume of replication, and the h3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the h3cRepLocalLvIndex is the replica logic volume of replication. , and the h3cRepRemoteLvIndex is the primary logic volume.
OBJECT-TYPE    
  INTEGER outgoing(1), incoming(2)  

h3cRepLocalServerIP 1.3.6.1.4.1.2011.10.10.2.1.10.1.3
This object identifies the ip address of local server.
OBJECT-TYPE    
  InetAddress  

h3cRepLocalServerIPType 1.3.6.1.4.1.2011.10.10.2.1.10.1.4
This object identifies the ip address type of local server.
OBJECT-TYPE    
  InetAddressType  

h3cRepLocalServerName 1.3.6.1.4.1.2011.10.10.2.1.10.1.5
This object identifies the name of local server.
OBJECT-TYPE    
  STRING  

h3cRepLocalServerUsername 1.3.6.1.4.1.2011.10.10.2.1.10.1.6
This object identifies the username of local server.
OBJECT-TYPE    
  STRING Size(1..32)  

h3cRepLocalServerPassword 1.3.6.1.4.1.2011.10.10.2.1.10.1.7
This object identifies the password of local server.
OBJECT-TYPE    
  STRING Size(1..127)  

h3cRepRemoteServerIP 1.3.6.1.4.1.2011.10.10.2.1.10.1.8
This object identifies the ip address of remote server.
OBJECT-TYPE    
  InetAddress  

h3cRepRemoteServerIPType 1.3.6.1.4.1.2011.10.10.2.1.10.1.9
This object identifies the ip address type of remote server.
OBJECT-TYPE    
  InetAddressType  

h3cRepRemoteServerName 1.3.6.1.4.1.2011.10.10.2.1.10.1.10
This object identifies the name of remote server.
OBJECT-TYPE    
  STRING  

h3cRepRemoteServerUsername 1.3.6.1.4.1.2011.10.10.2.1.10.1.11
This object identifies the username of remote server.
OBJECT-TYPE    
  STRING Size(1..32)  

h3cRepRemoteServerPassword 1.3.6.1.4.1.2011.10.10.2.1.10.1.12
This object identifies the password of remote server.
OBJECT-TYPE    
  STRING Size(1..127)  

h3cRepRemoteLvIndex 1.3.6.1.4.1.2011.10.10.2.1.10.1.13
This object identifies the logic volume of remote server.
OBJECT-TYPE    
  H3cLvIDType  

h3cReplicaMode 1.3.6.1.4.1.2011.10.10.2.1.10.1.14
This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'.
OBJECT-TYPE    
  INTEGER adaptive(1), remote(2), none(3)  

h3cReplicaWatermark 1.3.6.1.4.1.2011.10.10.2.1.10.1.15
This object identifies the size of watermark which means a replication is scheduled.
OBJECT-TYPE    
  Integer32  

h3cReplicaWatermarkRetry 1.3.6.1.4.1.2011.10.10.2.1.10.1.16
If the 'h3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute.
OBJECT-TYPE    
  Integer32  

h3cReplicaInitializeTime 1.3.6.1.4.1.2011.10.10.2.1.10.1.17
This object identifies the time to start an initial replication.
OBJECT-TYPE    
  DateAndTime  

h3cReplicaInterval 1.3.6.1.4.1.2011.10.10.2.1.10.1.18
This object identifies how often the replication should be repeated after initial replication. The units is minute.
OBJECT-TYPE    
  Integer32  

h3cReplicaEncrypt 1.3.6.1.4.1.2011.10.10.2.1.10.1.19
This object identifies the encrypt option is enable or diable.
OBJECT-TYPE    
  H3cStorageEnableState  

h3cReplicaCompress 1.3.6.1.4.1.2011.10.10.2.1.10.1.20
This object identifies the compress option is enable or diable.
OBJECT-TYPE    
  H3cStorageEnableState  

h3cReplicaUseExistTM 1.3.6.1.4.1.2011.10.10.2.1.10.1.21
This object identifies if using the exist TimeMark to replicate or not.
OBJECT-TYPE    
  H3cStorageEnableState  

h3cReplicaProtocol 1.3.6.1.4.1.2011.10.10.2.1.10.1.22
This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol.
OBJECT-TYPE    
  INTEGER tcp(1), rudp(2)  

h3cReplicaScanDiff 1.3.6.1.4.1.2011.10.10.2.1.10.1.23
This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized.
OBJECT-TYPE    
  TruthValue  

h3cReplicaStatSwitch 1.3.6.1.4.1.2011.10.10.2.1.10.1.24
This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource.
OBJECT-TYPE    
  INTEGER promte(1), sync(2), scan(3), reversal(4), stop(5), suspend(6), resume(7), none(8)  

h3cReplicaRowStatus 1.3.6.1.4.1.2011.10.10.2.1.10.1.25
This object identifies the action to enable or disable the replication.
OBJECT-TYPE    
  RowStatus  

h3cReplicaStateTable 1.3.6.1.4.1.2011.10.10.2.1.11
This table contains some entity to show replication state.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cReplicaStateEntry

h3cReplicaStateEntry 1.3.6.1.4.1.2011.10.10.2.1.11.1
An entry containing show information applicable to the replication state.
OBJECT-TYPE    
  H3cReplicaStateEntry  

h3cReplicaDelta 1.3.6.1.4.1.2011.10.10.2.1.11.1.1
This object identifies the size of delta data after last sync.
OBJECT-TYPE    
  Integer32  

h3cReplicaLastSyncTime 1.3.6.1.4.1.2011.10.10.2.1.11.1.2
This object identifies the date and time when last sync is taken.
OBJECT-TYPE    
  DateAndTime  

h3cReplicaNextSyncTime 1.3.6.1.4.1.2011.10.10.2.1.11.1.3
This object identifies the date and time when next sync will be taken.
OBJECT-TYPE    
  DateAndTime  

h3cReplicaSyncTotalSize 1.3.6.1.4.1.2011.10.10.2.1.11.1.4
This object identifies how much data need to be synchronized to the replica resource for current replication.
OBJECT-TYPE    
  Integer32  

h3cReplicaSyncCurPercentage 1.3.6.1.4.1.2011.10.10.2.1.11.1.5
This object identifies how much data has been synchronized to the replica resource for current replication.
OBJECT-TYPE    
  Integer32  

h3cReplicaSyncPerformance 1.3.6.1.4.1.2011.10.10.2.1.11.1.6
This object identifies the performance of the synchronize. The unit is MB/s.
OBJECT-TYPE    
  Integer32  

h3cReplicaRunStatus 1.3.6.1.4.1.2011.10.10.2.1.11.1.7
This object identifies the state of the replica.
OBJECT-TYPE    
  INTEGER suspend(1), idle(2), stop(3), sync(4), scan(5)  

h3cCDRConfigTable 1.3.6.1.4.1.2011.10.10.2.1.12
This table contains some entity to config Continuous Replication Resource.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cCDRConfigEntry

h3cCDRConfigEntry 1.3.6.1.4.1.2011.10.10.2.1.12.1
An entry containing some information applicable to Continuous Replication Resource of the logic volume.
OBJECT-TYPE    
  H3cCDRConfigEntry  

h3cCDRLvIndex 1.3.6.1.4.1.2011.10.10.2.1.12.1.1
This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of h3cRepLocalLvIndex. Note that an entry of h3cCDRConfigTable can be created only when the associated h3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cCDRDistributeTable objects should be deleted automatically.
OBJECT-TYPE    
  H3cLvIDType  

h3cCDRID 1.3.6.1.4.1.2011.10.10.2.1.12.1.2
This object identifies the Continuous Replication Resource.
OBJECT-TYPE    
  Integer32  

h3cCDRStatus 1.3.6.1.4.1.2011.10.10.2.1.12.1.3
This object identifies the state of the Continuous Replication Resource.
OBJECT-TYPE    
  H3cStorageOnlineState  

h3cCDRTotalSize 1.3.6.1.4.1.2011.10.10.2.1.12.1.4
This object identifies the total size of the Continuous Replication Resource.
OBJECT-TYPE    
  Integer32  

h3cCDRFreeSize 1.3.6.1.4.1.2011.10.10.2.1.12.1.5
This object identifies the free size of the Continuous Replication Resource.
OBJECT-TYPE    
  Integer32  

h3cCDRSelectPolicy 1.3.6.1.4.1.2011.10.10.2.1.12.1.6
This object describes the policy about allocating the space for Continuous Replication Resource.
OBJECT-TYPE    
  H3cExtendSelectPolicy  

h3cCDRRowStatus 1.3.6.1.4.1.2011.10.10.2.1.12.1.7
This object identifies the action to create or delete the Continuous Replication Resource.
OBJECT-TYPE    
  RowStatus  

h3cCDRDistributeTable 1.3.6.1.4.1.2011.10.10.2.1.13
This table contains some entity to config the distribution of Continuous Replication Resource.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cCDRDistributeEntry

h3cCDRDistributeEntry 1.3.6.1.4.1.2011.10.10.2.1.13.1
An entry containing some information applicable to the distribution of Continuous Replication Resource.
OBJECT-TYPE    
  H3cCDRDistributeEntry  

h3cCDRDistLvIndex 1.3.6.1.4.1.2011.10.10.2.1.13.1.1
This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB.
OBJECT-TYPE    
  H3cLvIDType  

h3cCDRRaidUuid 1.3.6.1.4.1.2011.10.10.2.1.13.1.2
This index is identical to h3cRaidUuid in H3C-RAID-MIB.
OBJECT-TYPE    
  H3cRaidIDType  

h3cCDRRaidSize 1.3.6.1.4.1.2011.10.10.2.1.13.1.3
This object identifies the size on the special raid distributed for the Continuous Replication Resource.
OBJECT-TYPE    
  Integer32  

h3cCDRExtRowStatus 1.3.6.1.4.1.2011.10.10.2.1.13.1.4
This object identifies the action to create the distribution for the Continuous Replication Resource.
OBJECT-TYPE    
  RowStatus  

h3cSafeCacheConfigTable 1.3.6.1.4.1.2011.10.10.2.1.14
This table contains some entity to config SafeCache.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cSafeCacheConfigEntry

h3cSafeCacheConfigEntry 1.3.6.1.4.1.2011.10.10.2.1.14.1
An entry containing some information applicable to SafeCache of the logic volume.
OBJECT-TYPE    
  H3cSafeCacheConfigEntry  

h3cSafeCacheLvIndex 1.3.6.1.4.1.2011.10.10.2.1.14.1.1
This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of h3cLvindex. Note that an entry of h3cSafeCacheConfigTable can be created only when the associated h3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cSafeCacheDistributeTable objects should be deleted automatically.
OBJECT-TYPE    
  H3cLvIDType  

h3cSafeCacheID 1.3.6.1.4.1.2011.10.10.2.1.14.1.2
This object identifies a SafeCache.
OBJECT-TYPE    
  Integer32  

h3cSafeCacheStatus 1.3.6.1.4.1.2011.10.10.2.1.14.1.3
This object identifies the state of the SafeCache.
OBJECT-TYPE    
  H3cStorageOnlineState  

h3cSafeCacheTotalSize 1.3.6.1.4.1.2011.10.10.2.1.14.1.4
This object identifies the total size of the SafeCache. The units is million bytes.
OBJECT-TYPE    
  Integer32  

h3cSafeCacheFreeSize 1.3.6.1.4.1.2011.10.10.2.1.14.1.5
This object identifies the free size of the SafeCache. The units is million bytes.
OBJECT-TYPE    
  Integer32  

h3cSafeCacheSelectPolicy 1.3.6.1.4.1.2011.10.10.2.1.14.1.6
This object describes the policy about allocating the space for SafeCache.
OBJECT-TYPE    
  H3cExtendSelectPolicy  

h3cSafeCacheThreshold 1.3.6.1.4.1.2011.10.10.2.1.14.1.7
This object identifies the maximal percentage of date changed before data flushing.
OBJECT-TYPE    
  Integer32 0..100  

h3cSafeCacheFlushTime 1.3.6.1.4.1.2011.10.10.2.1.14.1.8
This object identifies the period during which the date can stay in cache before data flushing. The units is second.
OBJECT-TYPE    
  Integer32  

h3cSafeCacheFlushCommand 1.3.6.1.4.1.2011.10.10.2.1.14.1.9
This object identifies the number of commands when data flushing.
OBJECT-TYPE    
  Integer32 1..64  

h3cSafeCacheSkipDupWrite 1.3.6.1.4.1.2011.10.10.2.1.14.1.10
This object identifies skip duplicate write commands or not.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cSafeCacheRunStatus 1.3.6.1.4.1.2011.10.10.2.1.14.1.11
This object identifies the run state of the SafeCache.
OBJECT-TYPE    
  INTEGER run(1), suspend(2)  

h3cSafeCacheSwitch 1.3.6.1.4.1.2011.10.10.2.1.14.1.12
This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache.
OBJECT-TYPE    
  INTEGER suspend(1), resume(2), none(3)  

h3cSafeCacheRowStatus 1.3.6.1.4.1.2011.10.10.2.1.14.1.13
This object identifies the action to create or delete the SafeCache.
OBJECT-TYPE    
  RowStatus  

h3cSafeCacheDistributeTable 1.3.6.1.4.1.2011.10.10.2.1.15
This table contains some entity to config the SafeCache resource.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cSafeCacheDistributeEntry

h3cSafeCacheDistributeEntry 1.3.6.1.4.1.2011.10.10.2.1.15.1
An entry containing some information applicable to SafeCache resource of the logic volume.
OBJECT-TYPE    
  H3cSafeCacheDistributeEntry  

h3cSafeCacheDistLvIndex 1.3.6.1.4.1.2011.10.10.2.1.15.1.1
This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB.
OBJECT-TYPE    
  H3cLvIDType  

h3cSafeCacheRaidUuid 1.3.6.1.4.1.2011.10.10.2.1.15.1.2
This index is identical to h3cRaidUuid in H3C-RAID-MIB.
OBJECT-TYPE    
  H3cRaidIDType  

h3cSafeCacheRaidSize 1.3.6.1.4.1.2011.10.10.2.1.15.1.3
This object identifies the size on the special raid distributed for the SafeCache resource.
OBJECT-TYPE    
  Integer32  

h3cSafeCacheExtRowStatus 1.3.6.1.4.1.2011.10.10.2.1.15.1.4
This object identifies the action to create the distribution for the SafeCache resource.
OBJECT-TYPE    
  RowStatus  

h3cMirrorConfigTable 1.3.6.1.4.1.2011.10.10.2.1.16
This table contains some entity to config mirror.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cMirrorConfigEntry

h3cMirrorConfigEntry 1.3.6.1.4.1.2011.10.10.2.1.16.1
An entry containing some information applicable to mirror for the logic volume.
OBJECT-TYPE    
  H3cMirrorConfigEntry  

h3cMirrorLvIndex 1.3.6.1.4.1.2011.10.10.2.1.16.1.1
This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of h3cLvindex. Note that an entry of h3cMirrorConfigTable can be created only when the associated h3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cMirrorDistributeTable objects should be deleted automatically.
OBJECT-TYPE    
  H3cLvIDType  

h3cMirrorType 1.3.6.1.4.1.2011.10.10.2.1.16.1.2
This object identifies the type of the mirror.
OBJECT-TYPE    
  INTEGER sync(1), async(2), none(3)  

h3cMirrorStatus 1.3.6.1.4.1.2011.10.10.2.1.16.1.3
This object identifies the state of the mirror resource.
OBJECT-TYPE    
  H3cStorageOnlineState  

h3cMirrorName 1.3.6.1.4.1.2011.10.10.2.1.16.1.4
This object identifies the name of the mirror resource. it is used when promote mirror resource.
OBJECT-TYPE    
  STRING  

h3cMirrorSyncPercentage 1.3.6.1.4.1.2011.10.10.2.1.16.1.5
This object identifies the percentage of the mirror sync.
OBJECT-TYPE    
  Integer32 0..100  

h3cMirrorSyncPerformance 1.3.6.1.4.1.2011.10.10.2.1.16.1.6
This object identifies the performance of the mirror sync. The unit is MB/S
OBJECT-TYPE    
  Integer32 0..100  

h3cMirrorDelta 1.3.6.1.4.1.2011.10.10.2.1.16.1.7
This object identifies size of delta data after the last mirror sync.
OBJECT-TYPE    
  Integer32  

h3cMirrorRaidType 1.3.6.1.4.1.2011.10.10.2.1.16.1.8
This object identifies the raid type of the mirror resource.
OBJECT-TYPE    
  INTEGER virtual(1), serviceEnable(2), none(3)  

h3cMirrorSelectPolicy 1.3.6.1.4.1.2011.10.10.2.1.16.1.9
This object describes the policy about allocating the space for mirror resource.
OBJECT-TYPE    
  H3cExtendSelectPolicy  

h3cMirrorSwitch 1.3.6.1.4.1.2011.10.10.2.1.16.1.10
This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically.
OBJECT-TYPE    
  INTEGER sync(1), swap(2), promote(3), none(4)  

h3cMirrorExtendRaidUuid 1.3.6.1.4.1.2011.10.10.2.1.16.1.11
This object identifies the raid of the mirror resource when the primary logic volume resource is extended.
OBJECT-TYPE    
  H3cRaidIDType  

h3cMirrorRowStatus 1.3.6.1.4.1.2011.10.10.2.1.16.1.12
This object identifies the action to create or delete the mirror resource.
OBJECT-TYPE    
  RowStatus  

h3cMirrorDistributeTable 1.3.6.1.4.1.2011.10.10.2.1.17
This table contains some entity to config the mirror resource.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cMirrorDistributeEntry

h3cMirrorDistributeEntry 1.3.6.1.4.1.2011.10.10.2.1.17.1
An entry containing some information applicable to mirror resource for the logic volume.
OBJECT-TYPE    
  H3cMirrorDistributeEntry  

h3cMirrorDistLvIndex 1.3.6.1.4.1.2011.10.10.2.1.17.1.1
This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB.
OBJECT-TYPE    
  H3cLvIDType  

h3cMirrorRaidUuid 1.3.6.1.4.1.2011.10.10.2.1.17.1.2
This index is identical to h3cRaidUuid in H3C-RAID-MIB.
OBJECT-TYPE    
  H3cRaidIDType  

h3cMirrorRaidSize 1.3.6.1.4.1.2011.10.10.2.1.17.1.3
This object identifies the size on the special raid distributed for the mirror resource.
OBJECT-TYPE    
  Integer32  

h3cMirrorExtRowStatus 1.3.6.1.4.1.2011.10.10.2.1.17.1.4
This object identifies the action to create or delete the distribution for the mirror resource.
OBJECT-TYPE    
  RowStatus