H3C-RS485-MIB

File: H3C-RS485-MIB.mib (13173 bytes)

Imported modules

HUAWEI-3COM-OID-MIB IF-MIB SNMPv2-SMI
INET-ADDRESS-MIB SNMPv2-TC

Imported symbols

h3cCommon ifIndex Integer32
OBJECT-TYPE MODULE-IDENTITY InetAddressType
InetAddress DisplayString RowStatus

Defined Types

H3cRS485PropertiesEntry  
SEQUENCE    
  h3cRS485RawSessionNextIndex Integer32
  h3cRS485BaudRate INTEGER
  h3cRS485DataBits INTEGER
  h3cRS485Parity INTEGER
  h3cRS485StopBits INTEGER
  h3cRS485FlowControl INTEGER
  h3cRS485TXCharacters Integer32
  h3cRS485RXCharacters Integer32
  h3cRS485TXErrCharacters Integer32
  h3cRS485RXErrCharacters Integer32
  h3cRS485ResetCharacters INTEGER

H3cRS485RawSessionEntry  
SEQUENCE    
  h3cRS485SessionIndex Integer32
  h3cRS485SessionType INTEGER
  h3cRS485SessionAddType InetAddressType
  h3cRS485SessionRemoteIP InetAddress
  h3cRS485SessionRemotePort Integer32
  h3cRS485SessionLocalPort Integer32
  h3cRS485SessionStatus RowStatus

H3cRS485RawSessionErrInfoEntry  
SEQUENCE    
  h3cRS485RawSessionErrInfo DisplayString

Defined Values

h3cRS485 1.3.6.1.4.1.2011.10.2.109
The objects in this MIB module are used to manage RS485 interfaces, and manage sessions on them.
MODULE-IDENTITY    

h3cRS485Properties 1.3.6.1.4.1.2011.10.2.109.1
OBJECT IDENTIFIER    

h3cRS485PropertiesTable 1.3.6.1.4.1.2011.10.2.109.1.1
Propertie table.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cRS485PropertiesEntry

h3cRS485PropertiesEntry 1.3.6.1.4.1.2011.10.2.109.1.1.1
Propertie entry.
OBJECT-TYPE    
  H3cRS485PropertiesEntry  

h3cRS485RawSessionNextIndex 1.3.6.1.4.1.2011.10.2.109.1.1.1.1
The next valid index of raw sessions, from 1 to 64, which session has been created. When there is no valid index left, it will return 0.
OBJECT-TYPE    
  Integer32 1..64  

h3cRS485BaudRate 1.3.6.1.4.1.2011.10.2.109.1.1.1.2
The port's baud rate.
OBJECT-TYPE    
  INTEGER bautRate300(1), bautRate600(2), bautRate1200(3), bautRate2400(4), bautRate4800(5), bautRate9600(6), bautRate19200(7), bautRate38400(8), bautRate57600(9), bautRate115200(10)  

h3cRS485DataBits 1.3.6.1.4.1.2011.10.2.109.1.1.1.3
The port's number of data bits in a character.
OBJECT-TYPE    
  INTEGER five(1), six(2), seven(3), eight(4)  

h3cRS485Parity 1.3.6.1.4.1.2011.10.2.109.1.1.1.4
The port's sense of a character parity bit.
OBJECT-TYPE    
  INTEGER none(1), odd(2), even(3), mark(4), space(5)  

h3cRS485StopBits 1.3.6.1.4.1.2011.10.2.109.1.1.1.5
The port's number of stop bits.
OBJECT-TYPE    
  INTEGER one(1), two(2), oneAndHalf(3)  

h3cRS485FlowControl 1.3.6.1.4.1.2011.10.2.109.1.1.1.6
The port's type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates use of hardware signals. 'xonOrxoff' indicates use of software function.
OBJECT-TYPE    
  INTEGER none(1), hardware(2), xonOrxoff(3)  

h3cRS485TXCharacters 1.3.6.1.4.1.2011.10.2.109.1.1.1.7
The number of output characters for the port.
OBJECT-TYPE    
  Integer32  

h3cRS485RXCharacters 1.3.6.1.4.1.2011.10.2.109.1.1.1.8
The number of input characters for the port.
OBJECT-TYPE    
  Integer32  

h3cRS485TXErrCharacters 1.3.6.1.4.1.2011.10.2.109.1.1.1.9
The number of output error characters for the port.
OBJECT-TYPE    
  Integer32  

h3cRS485RXErrCharacters 1.3.6.1.4.1.2011.10.2.109.1.1.1.10
The number of input error characters for the port.
OBJECT-TYPE    
  Integer32  

h3cRS485ResetCharacters 1.3.6.1.4.1.2011.10.2.109.1.1.1.11
Reset the counters to zero, inlucding h3cRS485TXCharacters, h3cRS485RXCharacters, h3cRS485TXErrCharacters and h3cRS485RXErrCharacters.
OBJECT-TYPE    
  INTEGER counting(1), clear(2)  

h3cRS485RawSessions 1.3.6.1.4.1.2011.10.2.109.2
OBJECT IDENTIFIER    

h3cRS485RawSessionSummary 1.3.6.1.4.1.2011.10.2.109.2.1
OBJECT IDENTIFIER    

h3cRS485RawSessionMaxNum 1.3.6.1.4.1.2011.10.2.109.2.1.1
The max number of raw sessions what we can support.
OBJECT-TYPE    
  Integer32 1..64  

h3cRS485RawSessionTable 1.3.6.1.4.1.2011.10.2.109.2.2
RS485 raw session table. Data recieved from rs485 will be sent to the destination by raw sockets.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cRS485RawSessionEntry

h3cRS485RawSessionEntry 1.3.6.1.4.1.2011.10.2.109.2.2.1
Parameters of a session, including remote IP address, remote port, local port, and so on.
OBJECT-TYPE    
  H3cRS485RawSessionEntry  

h3cRS485SessionIndex 1.3.6.1.4.1.2011.10.2.109.2.2.1.1
Raw session index.
OBJECT-TYPE    
  Integer32 1..64  

h3cRS485SessionType 1.3.6.1.4.1.2011.10.2.109.2.2.1.2
The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
OBJECT-TYPE    
  INTEGER udp(1), tcpClient(2), tcpServer(3)  

h3cRS485SessionAddType 1.3.6.1.4.1.2011.10.2.109.2.2.1.3
This object indicates the transport type of the address contained in h3cRS485SessionRemoteIP object.
OBJECT-TYPE    
  InetAddressType  

h3cRS485SessionRemoteIP 1.3.6.1.4.1.2011.10.2.109.2.2.1.4
The IP of remote entry. When session type is 'udp', this is the IP of the peer. When session type is 'tcpClient', this is the IP of the server . When session type is 'tcpServer', this is invalid, it will return 0.
OBJECT-TYPE    
  InetAddress  

h3cRS485SessionRemotePort 1.3.6.1.4.1.2011.10.2.109.2.2.1.5
The port of remote entry. When session type is 'udp', this is port of the peer. When session type is 'tcpClient', this is the port of the server. When session type is 'tcpServer', this is invalid, it will return 0.
OBJECT-TYPE    
  Integer32 1024..65535  

h3cRS485SessionLocalPort 1.3.6.1.4.1.2011.10.2.109.2.2.1.6
Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid, it will return 0. When session type is 'tcpServer', this is the local port which will be listened.
OBJECT-TYPE    
  Integer32 1024..65535  

h3cRS485SessionStatus 1.3.6.1.4.1.2011.10.2.109.2.2.1.7
The status column used for creating, modifying, and deleting instances of the columnar objects in raw session table.
OBJECT-TYPE    
  RowStatus  

h3cRS485RawSessionErrInfoTable 1.3.6.1.4.1.2011.10.2.109.2.3
Error infomation table. It is fail to create a session, management station can get infomation from this table.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cRS485RawSessionErrInfoEntry

h3cRS485RawSessionErrInfoEntry 1.3.6.1.4.1.2011.10.2.109.2.3.1
Error infomaition.
OBJECT-TYPE    
  H3cRS485RawSessionErrInfoEntry  

h3cRS485RawSessionErrInfo 1.3.6.1.4.1.2011.10.2.109.2.3.1.1
Error infomation string. When a response with 'noCreeation' for row creation in table h3cRS485RawSessionTable, the management station should display this string to users, thus users can konw the reason.
OBJECT-TYPE    
  DisplayString