H3C-QOS-PROFILE-MIB

File: H3C-QOS-PROFILE-MIB.mib (37666 bytes)

Imported modules

HUAWEI-3COM-OID-MIB SNMPv2-CONF SNMPv2-SMI
SNMPv2-TC

Imported symbols

h3cCommon OBJECT-GROUP MODULE-COMPLIANCE
NOTIFICATION-GROUP IpAddress OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE Integer32
RowStatus TruthValue MacAddress
TEXTUAL-CONVENTION

Defined Types

H3cQoSDirection  
Description.
TEXTUAL-CONVENTION    
  INTEGER invalid(0), input(1), ouput(2)  

H3cQoSProfEntry  
SEQUENCE    
  h3cQoSProfIndex Integer32
  h3cQoSProfName OCTET STRING
  h3cQoSProfActionNumber Integer32
  h3cQoSProfRowStatus RowStatus

H3cQoSTrafficLimitEntry  
SEQUENCE    
  h3cQoSTrafLmtProfIndex Integer32
  h3cQoSTrafLmtActionIndex Integer32
  h3cQoSTrafLmtDirection H3cQoSDirection
  h3cQoSTrafLmtUserAclNum Integer32
  h3cQoSTrafLmtUserAclRule Integer32
  h3cQoSTrafLmtIpAclNum Integer32
  h3cQoSTrafLmtIpAclRule Integer32
  h3cQoSTrafLmtLinkAclNum Integer32
  h3cQoSTrafLmtLinkAclRule Integer32
  h3cQoSTrafLmtTargetRateMbps Integer32
  h3cQoSTrafLmtTargetRateKbps Integer32
  h3cQoSTrafLmtPeakRate Integer32
  h3cQoSTrafLmtCIR Integer32
  h3cQoSTrafLmtCBS Integer32
  h3cQoSTrafLmtEBS Integer32
  h3cQoSTrafLmtPIR Integer32
  h3cQoSTrafLmtConformLocalPre Integer32
  h3cQoSTrafLmtConformActionType INTEGER
  h3cQoSTrafLmtExceedActionType INTEGER
  h3cQoSTrafLmtExceedDscp Integer32
  h3cQoSTrafLmtExceedCos Integer32
  h3cQoSTrafLmtRowStatus RowStatus
  h3cQoSTrafLmtConformCos Integer32
  h3cQoSTrafLmtConformDscp Integer32

H3cQoSTrafficPriorityEntry  
SEQUENCE    
  h3cQoSTrafPrioProfIndex Integer32
  h3cQoSTrafPrioActionIndex Integer32
  h3cQoSTrafPrioDirection H3cQoSDirection
  h3cQoSTrafPrioUserAclNum Integer32
  h3cQoSTrafPrioUserAclRule Integer32
  h3cQoSTrafPrioIpAclNum Integer32
  h3cQoSTrafPrioIpAclRule Integer32
  h3cQoSTrafPrioLinkAclNum Integer32
  h3cQoSTrafPrioLinkAclRule Integer32
  h3cQoSTrafPrioDscp Integer32
  h3cQoSTrafPrioIpPre Integer32
  h3cQoSTrafPrioIpPreFromCos TruthValue
  h3cQoSTrafPrioCos Integer32
  h3cQoSTrafPrioCosFromIpPre TruthValue
  h3cQoSTrafPrioLocalPre Integer32
  h3cQoSTrafPrioPolicedServiceType INTEGER
  h3cQoSTrafPrioPolicedServiceDscp Integer32
  h3cQoSTrafPrioPolicedServiceExp Integer32
  h3cQoSTrafPrioPolicedServiceCos Integer32
  h3cQoSTrafPrioPolicedServiceLoaclPre Integer32
  h3cQoSTrafPrioPolicedServiceDropPriority Integer32
  h3cQoSTrafPrioRowStatus RowStatus

H3cQoSTrafficFilterEntry  
SEQUENCE    
  h3cQoSTrafFilterProfIndex Integer32
  h3cQoSTrafFilterActionIndex Integer32
  h3cQoSTrafFilterDirection H3cQoSDirection
  h3cQoSTrafFilterUserAclNum Integer32
  h3cQoSTrafFilterUserAclRule Integer32
  h3cQoSTrafFilterIpAclNum Integer32
  h3cQoSTrafFilterIpAclRule Integer32
  h3cQoSTrafFilterLinkAclNum Integer32
  h3cQoSTrafFilterLinkAclRule Integer32
  h3cQoSTrafFilterRowStatus RowStatus

H3cQoSProfPortMappingEntry  
SEQUENCE    
  h3cQoSProfPortMappingIfIndex Integer32
  h3cQoSProfPortMappingProfIndex Integer32
  h3cQoSProfPortMappingRowStatus RowStatus

H3cQoSProfPortMappingModeEntry  
SEQUENCE    
  h3cQoSProfPortMappingModeIfIndex Integer32
  h3cQoSProfPortMappingMode INTEGER

H3cQoSProfDynPortMappingEntry  
SEQUENCE    
  h3cQoSProfDynPortMappingIfIndex Integer32
  h3cQoSProfDynPortMappingUserSrcMAC MacAddress
  h3cQoSProfDynPortMappingUserName OCTET STRING
  h3cQoSProfDynPortMappingUserIPAddr IpAddress
  h3cQoSProfDynPortMappingUserVLANID Integer32
  h3cQoSProfDynPortMappingUserProfName OCTET STRING

Defined Values

h3cQosProfile 1.3.6.1.4.1.2011.10.2.17
The private mib file includes the general information QoS profile.
MODULE-IDENTITY    

h3cQoSProfObjects 1.3.6.1.4.1.2011.10.2.17.1
OBJECT IDENTIFIER    

h3cQoSProf 1.3.6.1.4.1.2011.10.2.17.1.1
OBJECT IDENTIFIER    

h3cQoSProfTable 1.3.6.1.4.1.2011.10.2.17.1.1.1
QoS profile table is used to config the qos profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cQoSProfEntry

h3cQoSProfEntry 1.3.6.1.4.1.2011.10.2.17.1.1.1.1
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cQoSProfEntry  

h3cQoSProfIndex 1.3.6.1.4.1.2011.10.2.17.1.1.1.1.1
QoS profile table index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSProfName 1.3.6.1.4.1.2011.10.2.17.1.1.1.1.2
QoS profile name.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

h3cQoSProfActionNumber 1.3.6.1.4.1.2011.10.2.17.1.1.1.1.3
Total number of actions of a QoS profile.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSProfRowStatus 1.3.6.1.4.1.2011.10.2.17.1.1.1.1.4
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cQoSAction 1.3.6.1.4.1.2011.10.2.17.1.2
OBJECT IDENTIFIER    

h3cQoSTrafficLimitTable 1.3.6.1.4.1.2011.10.2.17.1.2.1
Traffic limit table is used to set the average rate or peak rate of the flow. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cQoSTrafficLimitEntry

h3cQoSTrafficLimitEntry 1.3.6.1.4.1.2011.10.2.17.1.2.1.1
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cQoSTrafficLimitEntry  

h3cQoSTrafLmtProfIndex 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.1
The index of QoS profile which the traffic-limit action belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSTrafLmtActionIndex 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.2
The index of traffic-limit action.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSTrafLmtDirection 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.3
The direction of traffic-limit action.
Status: current Access: read-create
OBJECT-TYPE    
  H3cQoSDirection  

h3cQoSTrafLmtUserAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.4
The number of user-based acl group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 5000..5999  

h3cQoSTrafLmtUserAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.5
The subitem of user-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafLmtIpAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.6
The number of Ip-based acl group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 2000..3999  

h3cQoSTrafLmtIpAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.7
The subitem of IP-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafLmtLinkAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.8
The number of Link-based acl group
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 4000..4999  

h3cQoSTrafLmtLinkAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.9
The subitem of Link-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafLmtTargetRateMbps 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.10
Target rate:Mbps Some products only support Mbps,but others support Kbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..10000  

h3cQoSTrafLmtTargetRateKbps 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.11
Target rate:Kbps. Some products only support Kbps,but others support Mbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..10000000  

h3cQoSTrafLmtPeakRate 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.12
Peak rate
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 64..8388608  

h3cQoSTrafLmtCIR 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.13
Committed Information Rate. unit:kbps.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..34120000  

h3cQoSTrafLmtCBS 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.14
Committed Burst Size. unit:byte.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..1048575  

h3cQoSTrafLmtEBS 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.15
Excess Burst Size. unit:byte.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..268435455  

h3cQoSTrafLmtPIR 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.16
Peak Information Rate. unit:kbps.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..34120000  

h3cQoSTrafLmtConformLocalPre 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.17
The local precedence of conformed flow.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7  

h3cQoSTrafLmtConformActionType 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.18
The action type of conformed flow.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), remark-cos(1), remark-drop-priority(2), remark-cos-drop-priority(3), remark-policed-service(4), remark-dscp(5)  

h3cQoSTrafLmtExceedActionType 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.19
The action type of non-conformed flow.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), forward(1), drop(2), remarkdscp(3), exceed-cos(4)  

h3cQoSTrafLmtExceedDscp 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.20
The remarked DSCP value of non-conformed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking DSCP, then value 255 is returned for get/get-next operation.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..63 | 255  

h3cQoSTrafLmtExceedCos 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.21
The remarked COS value of non-conformed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking COS, then value 255 is returned for get/get-next operation.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

h3cQoSTrafLmtRowStatus 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.22
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cQoSTrafLmtConformCos 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.23
If the user chooses remark-cos value of the h3cQoSTrafLmtConformActionType, this object can be used to set the conform cos value. There are some enumerations as follows: best-effort Specify best-effort priority(0) background Specify background priority(1) spare Specify spare priority(2) excellent-effort Specify excellent-effort priority(3) controlled-load Specify controlled-load priority(4) video Specify video priority(5) voice Specify voice priority(6) network-management Specify network-management priority(7) 255 indicates invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

h3cQoSTrafLmtConformDscp 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.24
If the user chooses remark-dscp value of the h3cQoSTrafLmtConformActionType, this object can be used to set the conform dscp value. There are some enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) 255 indicates invalid value.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..63 | 255  

h3cQoSTrafficPriorityTable 1.3.6.1.4.1.2011.10.2.17.1.2.2
Traffic priority table is used to remark the IP-precedence, DSCP or COS priority of packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. QOS policed service from DSCP mapping table is pre-defined in the hwDscpMapTable in the HUAWEI-LswQos-MIB. Policed service can decide what kind of QOS service the flow should get by the DSCP vlaue in the packets. Policed service includes remarking new DSCP,new EXP,new 802.1p priority,new local precedence and new drop priority.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cQoSTrafficPriorityEntry

h3cQoSTrafficPriorityEntry 1.3.6.1.4.1.2011.10.2.17.1.2.2.1
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cQoSTrafficPriorityEntry  

h3cQoSTrafPrioProfIndex 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.1
The index of QoS profile which the traffic-priority action belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSTrafPrioActionIndex 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.2
The index of traffic-priority action.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSTrafPrioDirection 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.3
The direction of traffic-priority action.
Status: current Access: read-create
OBJECT-TYPE    
  H3cQoSDirection  

h3cQoSTrafPrioUserAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.4
The number of user-based acl group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 5000..5999  

h3cQoSTrafPrioUserAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.5
The subitem of user-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafPrioIpAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.6
The number of Ip-based acl group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 2000..3999  

h3cQoSTrafPrioIpAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.7
The subitem of IP-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafPrioLinkAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.8
The number of Link-based acl group
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 4000..4999  

h3cQoSTrafPrioLinkAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.9
The subitem of Link-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafPrioDscp 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.10
Set new DSCP value of specifed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking DSCP, then value 255 is returned for get/get-next operation.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..63 | 255  

h3cQoSTrafPrioIpPre 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.11
Set Ip precedence value of specifed flow. Ip precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence, then value 255 is returned for get/get-next operation.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

h3cQoSTrafPrioIpPreFromCos 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.12
Set Ip precedence according to vlan priority. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence from COS, then value 2 is returned for get/get-next operation.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

h3cQoSTrafPrioCos 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.13
Set vlan priority of specifed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS, then value 255 is returned for get/get-next operation.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

h3cQoSTrafPrioCosFromIpPre 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.14
Set vlan priority according to IP precedence. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS from Ip precedence, then value 2 is returned for get/get-next operation.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

h3cQoSTrafPrioLocalPre 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.15
Set local precedence of specifed flow. Local precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking local precedence, then value 255 is returned for get/get-next operation.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

h3cQoSTrafPrioPolicedServiceType 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.16
The service type of policed Priority. Policed Service is not allowed to be set with remarking DSCP,IpPrecedence,IpPrecedenceFromCOS,COS,COSFromIpPrecedence and LocalPrecedence action simultaneously on the same product. Policed service is user-predefined qos policy parameters. trust-dscp(2) means to decide new police service parameters by the DSCP value in the packets. new-dscp(3) means to decide new police service parameters by the new DSCP value set by the user. And a DSCP mapping table should be pre-defined in the hwDscpMapTable in the HUAWEI-LswQos-MIB. Untrusted(4) means to set all the new DSCP,EXP,COS,Local precedence and Drop priority by the user.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), trust-dscp(2), new-dscp(3), untrusted(4)  

h3cQoSTrafPrioPolicedServiceDscp 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.17
The service Dscp of policed Priority
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..63 | 255  

h3cQoSTrafPrioPolicedServiceExp 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.18
The service Exp of policed Priority
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

h3cQoSTrafPrioPolicedServiceCos 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.19
The service cos of policed Priority
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

h3cQoSTrafPrioPolicedServiceLoaclPre 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.20
The service local pre of policed Priority
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..7 | 255  

h3cQoSTrafPrioPolicedServiceDropPriority 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.21
The service drop priority of proliced Priority
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..2 | 255  

h3cQoSTrafPrioRowStatus 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.22
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cQoSTrafficFilterTable 1.3.6.1.4.1.2011.10.2.17.1.2.3
Traffic filter table is used to deny or permit packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. To deny or permit packets,the ACL rules should be defined in h3cAcl table. The 'deny' or 'permit' action should be defined with ACL rules. In this table,a predefined ACL rules can be referenced in a specified QOS profile group. 'Direction' means the ACL rules can be applied to the inbound or outbound packets.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cQoSTrafficFilterEntry

h3cQoSTrafficFilterEntry 1.3.6.1.4.1.2011.10.2.17.1.2.3.1
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cQoSTrafficFilterEntry  

h3cQoSTrafFilterProfIndex 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.1
The index of QoS profile which the traffic-filter action belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSTrafFilterActionIndex 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.2
The index of traffic-filter action.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSTrafFilterDirection 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.3
The direction of traffic-filter action.
Status: current Access: read-create
OBJECT-TYPE    
  H3cQoSDirection  

h3cQoSTrafFilterUserAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.4
The number of user-based acl group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 5000..5999  

h3cQoSTrafFilterUserAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.5
The subitem of user-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafFilterIpAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.6
The number of Ip-based acl group.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 2000..3999  

h3cQoSTrafFilterIpAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.7
The subitem of IP-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafFilterLinkAclNum 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.8
The number of Link-based acl group
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0 | 4000..4999  

h3cQoSTrafFilterLinkAclRule 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.9
The subitem of Link-based acl rule.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65535  

h3cQoSTrafFilterRowStatus 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.10
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cQoSProfPortMapping 1.3.6.1.4.1.2011.10.2.17.1.3
OBJECT IDENTIFIER    

h3cQoSProfPortMappingTable 1.3.6.1.4.1.2011.10.2.17.1.3.1
Port mapping table is used to apply the qos profile to the port. If a qos profile is applied to the port, then the port will have an entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cQoSProfPortMappingEntry

h3cQoSProfPortMappingEntry 1.3.6.1.4.1.2011.10.2.17.1.3.1.1
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cQoSProfPortMappingEntry  

h3cQoSProfPortMappingIfIndex 1.3.6.1.4.1.2011.10.2.17.1.3.1.1.1
The ifindex which the specified QoS profile group is applied to.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

h3cQoSProfPortMappingProfIndex 1.3.6.1.4.1.2011.10.2.17.1.3.1.1.2
The index of specified QoS profile group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSProfPortMappingRowStatus 1.3.6.1.4.1.2011.10.2.17.1.3.1.1.3
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cQoSProfPortMappingModeTable 1.3.6.1.4.1.2011.10.2.17.1.3.2
Port mapping mode table is used to set mapping mode of the port. When a qos profile is applied to a port, the profile can have two working ways: 1)The profile is the same for all the users connected to the port; 2)The profile can be different for different users connected to the port; Port-based mode means the profile is the same for all the users. User-based mode means the profile is different for different users. Default value is port-based.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cQoSProfPortMappingModeEntry

h3cQoSProfPortMappingModeEntry 1.3.6.1.4.1.2011.10.2.17.1.3.2.1
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cQoSProfPortMappingModeEntry  

h3cQoSProfPortMappingModeIfIndex 1.3.6.1.4.1.2011.10.2.17.1.3.2.1.1
The ifindex which the QoS profile mapping mode is applied to.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

h3cQoSProfPortMappingMode 1.3.6.1.4.1.2011.10.2.17.1.3.2.1.2
The QoS profile mapping mode of specifed port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER user-based(1), port-based(2)  

h3cQoSProfDynPortMappingTable 1.3.6.1.4.1.2011.10.2.17.1.3.3
Dynamic port mapping table is used to get user' port,MAC address,IP address,VLAN ID and user-specified qos profiles. Network managers can allocate different QOS profile groups to different users. Once the user is on line, then the user-specified QOS profiles will be dynamically applied to the port the user connects. Each port can have different groups of users simultaneously connected. Each group of users can have assiociation with multiple QOS profiles simultaneously. So the user's port,MAC address,IP address and VLAN ID will replace the source information in the ACL rules refered in the QOS profiles. Once the user is off line, then the user-specified QOS profiles will be dynamically deleted from the port the user connects.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cQoSProfDynPortMappingEntry

h3cQoSProfDynPortMappingEntry 1.3.6.1.4.1.2011.10.2.17.1.3.3.1
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cQoSProfDynPortMappingEntry  

h3cQoSProfDynPortMappingIfIndex 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.1
if index of the port user profile is applied.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

h3cQoSProfDynPortMappingUserSrcMAC 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.2
User sourc MAC address.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cQoSProfDynPortMappingUserName 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.3
User name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

h3cQoSProfDynPortMappingUserIPAddr 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.4
User IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

h3cQoSProfDynPortMappingUserVLANID 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.5
User VLAN ID.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..65535  

h3cQoSProfDynPortMappingUserProfName 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.6
User profile name.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

h3cQoSProfPortMappingTraps 1.3.6.1.4.1.2011.10.2.17.2
OBJECT IDENTIFIER    

h3cQoSProfPortMappingError 1.3.6.1.4.1.2011.10.2.17.2.1
An h3cQoSProfPortMappingError notification is generated when a qos profile fails to be applied on the port.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cQoSProfMibConformance 1.3.6.1.4.1.2011.10.2.17.3
OBJECT IDENTIFIER    

h3cQoSProfMibCompliances 1.3.6.1.4.1.2011.10.2.17.3.1
OBJECT IDENTIFIER    

h3cQoSProfMibCompliance 1.3.6.1.4.1.2011.10.2.17.3.1.1
The compliance statement for QoS Profile MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

h3cQoSProfMibGroups 1.3.6.1.4.1.2011.10.2.17.3.2
OBJECT IDENTIFIER    

h3cQoSProfGroup 1.3.6.1.4.1.2011.10.2.17.3.2.1
Included table: h3cQoSProfTable.
Status: current Access: read-only
OBJECT-GROUP    

h3cQoSActionGroup 1.3.6.1.4.1.2011.10.2.17.3.2.2
Included table: 1)h3cQoSTrafficLimitTable. 2)h3cQoSTrafficPriorityTable. 3)h3cQoSTrafficFilterTable
Status: current Access: read-only
OBJECT-GROUP    

h3cQoSProfPortMappingGroup 1.3.6.1.4.1.2011.10.2.17.3.2.3
Included tables: 1)h3cQoSProfPortMappingTable. 2)h3cQoSProfPortMappingModeTable. 3)h3cQoSProfDynPortMappingTable.
Status: current Access: read-only
OBJECT-GROUP    

h3cQoSProfPortMappingTrapsGroup 1.3.6.1.4.1.2011.10.2.17.3.2.4
Included: h3cQoSProfPortMappingTraps.
Status: current Access: read-only
NOTIFICATION-GROUP