H3C-NQA-MIB

File: H3C-NQA-MIB.mib (96639 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
HUAWEI-3COM-OID-MIB DISMAN-PING-MIB SNMP-FRAMEWORK-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
OBJECT-IDENTITY NOTIFICATION-TYPE Integer32
Counter32 Gauge32 DateAndTime
DisplayString RowStatus InetAddressType
InetAddress h3cRhw pingCtlEntry
pingCtlOwnerIndex pingCtlTestName pingCtlType
pingCtlTargetAddress pingCtlTargetAddressType pingCtlDescr
SnmpAdminString

Defined Types

H3cNqaCtlEntry  
SEQUENCE    
  h3cNqaCtlTargetPort Integer32
  h3cNqaCtlSourcePort Integer32
  h3cNqaCtlTTL Integer32
  h3cNqaCtlJitterAdminInterval Integer32
  h3cNqaCtlJitterAdminNumPackets Integer32
  h3cNqaCtlHttpOperationType INTEGER
  h3cNqaCtlHttpOperationString DisplayString
  h3cNqaCtlFtpOperationType INTEGER
  h3cNqaCtlFtpUsername DisplayString
  h3cNqaCtlFtpPassword DisplayString
  h3cNqaCtlFtpOperationString DisplayString
  h3cNqaCtlVPNInstance DisplayString
  h3cNqaCtlHistoryKeptTime Integer32
  h3cNqaCtlHistoryEnable INTEGER
  h3cNqaCtlICPIFAdvFactor Integer32
  h3cNqaCtlCodecType INTEGER

H3cNqaResultsEntry  
SEQUENCE    
  h3cNqaResultsRttNumDisconnects Unsigned32
  h3cNqaResultsRttTimeouts Unsigned32
  h3cNqaResultsRttBusies Unsigned32
  h3cNqaResultsRttNoConnections Unsigned32
  h3cNqaResultsRttDrops Unsigned32
  h3cNqaResultsRttSequenceErrors Unsigned32
  h3cNqaResultsRttStatsErrors Unsigned32
  h3cNqaResultsMaxDelaySD Unsigned32
  h3cNqaResultsMaxDelayDS Unsigned32
  h3cNqaResultsLostPacketRatio Unsigned32
  h3cNqaResultsPacketLateArrival Unsigned32
  h3cNqaResultsRttSum Unsigned32
  h3cNqaResultsNumOfDelaySD Unsigned32
  h3cNqaResultsMinDelaySD Unsigned32
  h3cNqaResultsSumDelaySD Unsigned32
  h3cNqaResultsSum2DelaySD Unsigned32
  h3cNqaResultsNumOfDelayDS Unsigned32
  h3cNqaResultsMinDelayDS Unsigned32
  h3cNqaResultsSumDelayDS Unsigned32
  h3cNqaResultsSum2DelayDS Unsigned32

H3cNqaJitterStatsEntry  
SEQUENCE    
  h3cNqaJitterStatsNumOfRTT Counter32
  h3cNqaJitterStatsMinOfPositivesSD Gauge32
  h3cNqaJitterStatsMaxOfPositivesSD Gauge32
  h3cNqaJitterStatsNumOfPositivesSD Gauge32
  h3cNqaJitterStatsSumOfPositivesSD Gauge32
  h3cNqaJitterStatsSum2PositivesSD Gauge32
  h3cNqaJitterStatsMinOfNegativesSD Gauge32
  h3cNqaJitterStatsMaxOfNegativesSD Gauge32
  h3cNqaJitterStatsNumOfNegativesSD Gauge32
  h3cNqaJitterStatsSumOfNegativesSD Gauge32
  h3cNqaJitterStatsSum2NegativesSD Gauge32
  h3cNqaJitterStatsMinOfPositivesDS Gauge32
  h3cNqaJitterStatsMaxOfPositivesDS Gauge32
  h3cNqaJitterStatsNumOfPositivesDS Gauge32
  h3cNqaJitterStatsSumOfPositivesDS Gauge32
  h3cNqaJitterStatsSum2PositivesDS Gauge32
  h3cNqaJitterStatsMinOfNegativesDS Gauge32
  h3cNqaJitterStatsMaxOfNegativesDS Gauge32
  h3cNqaJitterStatsNumOfNegativesDS Gauge32
  h3cNqaJitterStatsSumOfNegativesDS Gauge32
  h3cNqaJitterStatsSum2NegativesDS Gauge32
  h3cNqaJitterStatsPacketLossSD Gauge32
  h3cNqaJitterStatsPacketLossDS Gauge32
  h3cNqaJitterStatsAvePositivesSD Gauge32
  h3cNqaJitterStatsAveNegativesSD Gauge32
  h3cNqaJitterStatsAvePositivesDS Gauge32
  h3cNqaJitterStatsAveNegativesDS Gauge32
  h3cNqaJitterStatsPktLossUnknown Gauge32
  h3cNqaJitterStatsOperOfICPIF Gauge32
  h3cNqaJitterStatsOperOfMOS Gauge32

H3cNqaTcpServerEntry  
SEQUENCE    
  h3cNqaTcpServerIpAddress InetAddress
  h3cNqaTcpServerPort Integer32
  h3cNqaTcpServerRowStatus RowStatus

H3cNqaUdpServerEntry  
SEQUENCE    
  h3cNqaUdpServerIpAddress InetAddress
  h3cNqaUdpServerPort Integer32
  h3cNqaUdpServerRowStatus RowStatus

H3cNqaStatisticsCtlEntry  
SEQUENCE    
  h3cNqaCtlStatisticsInterval Unsigned32
  h3cNqaCtlStatisticsGroupNumber Unsigned32
  h3cNqaCtlStatisticsKeptTime Unsigned32
  h3cNqaCtlBeginTime DateAndTime
  h3cNqaCtlLifeTime Unsigned32

H3cNqaStatisticsResultsEntry  
SEQUENCE    
  h3cNqaStatResIndex Unsigned32
  h3cNqaStatResIpTargetAddressType InetAddressType
  h3cNqaStatResIpTargetAddress InetAddress
  h3cNqaStatResMinRtt Gauge32
  h3cNqaStatResMaxRtt Gauge32
  h3cNqaStatResAverageRtt Gauge32
  h3cNqaStatResProbeResponses Counter32
  h3cNqaStatResSentProbes Counter32
  h3cNqaStatResRttSumOfSquares Counter32
  h3cNqaStatResStartTime DateAndTime
  h3cNqaStatResInterval Gauge32
  h3cNqaStatResRttNumDisconnects Counter32
  h3cNqaStatResRttTimeouts Counter32
  h3cNqaStatResRttBusies Counter32
  h3cNqaStatResRttNoConnections Counter32
  h3cNqaStatResRttDrops Counter32
  h3cNqaStatResRttSequenceErrors Counter32
  h3cNqaStatResRttErrors Counter32
  h3cNqaStatResLostPacketRatio Gauge32
  h3cNqaStatResPacketLateArrival Counter32
  h3cNqaStatResRttSum Counter32
  h3cNqaStatResNumOfDelaySD Counter32
  h3cNqaStatResMinDelaySD Gauge32
  h3cNqaStatResMaxDelaySD Gauge32
  h3cNqaStatResSumDelaySD Counter32
  h3cNqaStatResSum2DelaySD Counter32
  h3cNqaStatResNumOfDelayDS Counter32
  h3cNqaStatResMinDelayDS Gauge32
  h3cNqaStatResMaxDelayDS Gauge32
  h3cNqaStatResSumDelayDS Counter32
  h3cNqaStatResSum2DelayDS Counter32

H3cNqaGroupStatsJitterEntry  
SEQUENCE    
  h3cNqaStatJitterIndex Unsigned32
  h3cNqaStatJitterMinOfPosSD Gauge32
  h3cNqaStatJitterMaxOfPosSD Gauge32
  h3cNqaStatJitterNumOfPosSD Counter32
  h3cNqaStatJitterSumOfPosSD Counter32
  h3cNqaStatJitterSumOfSquarePosSD Counter32
  h3cNqaStatJitterMinOfNegSD Gauge32
  h3cNqaStatJitterMaxOfNegSD Gauge32
  h3cNqaStatJitterNumOfNegSD Counter32
  h3cNqaStatJitterSumOfNegSD Counter32
  h3cNqaStatJitterSumOfSquareNegSD Counter32
  h3cNqaStatJitterMinOfPosDS Gauge32
  h3cNqaStatJitterMaxOfPosDS Gauge32
  h3cNqaStatJitterNumOfPosDS Counter32
  h3cNqaStatJitterSumOfPosDS Counter32
  h3cNqaStatJitterSumOfSquarePosDS Counter32
  h3cNqaStatJitterMinOfNegDS Gauge32
  h3cNqaStatJitterMaxOfNegDS Gauge32
  h3cNqaStatJitterNumOfNegDS Counter32
  h3cNqaStatJitterSumOfNegDS Counter32
  h3cNqaStatJitterSumOfSquareNegDS Counter32
  h3cNqaStatJitterPacketLossSD Counter32
  h3cNqaStatJitterPacketLossDS Counter32
  h3cNqaStatJitterAvePosSD Gauge32
  h3cNqaStatJitterAveNegSD Gauge32
  h3cNqaStatJitterAvePosDS Gauge32
  h3cNqaStatJitterAveNegDS Gauge32
  h3cNqaStatJitterPktLossUnknown Counter32
  h3cNqaStatJitterMaxOfICPIF Gauge32
  h3cNqaStatJitterMinOfICPIF Gauge32
  h3cNqaStatJitterMaxOfMOS Gauge32
  h3cNqaStatJitterMinOfMOS Gauge32

H3cNqaReactionEntry  
SEQUENCE    
  h3cNqaReactOwnerIndex SnmpAdminString
  h3cNqaReactTestName SnmpAdminString
  h3cNqaReactItemIndex Unsigned32
  h3cNqaReactCheckedElement INTEGER
  h3cNqaReactThresholdUpperLimit Unsigned32
  h3cNqaReactThresholdLowerLimit Unsigned32
  h3cNqaReactThresholdType INTEGER
  h3cNqaReactThresholdConsecNum Unsigned32
  h3cNqaReactThresholdAccumNum Unsigned32
  h3cNqaReactActionType INTEGER
  h3cNqaReactCurrentStatus INTEGER
  h3cNqaReactRowStatus RowStatus
  h3cNqaReactCheckedNum Unsigned32
  h3cNqaReactThresholdNum Unsigned32

H3cNqaStatisticsReactionEntry  
SEQUENCE    
  h3cNqaStatReactOwnerIndex SnmpAdminString
  h3cNqaStatReactTestName SnmpAdminString
  h3cNqaStatReactIndex Unsigned32
  h3cNqaStatReactItemIndex Unsigned32
  h3cNqaStatReactCheckedNum Counter32
  h3cNqaStatReactThresholdNum Counter32

Defined Values

h3cNqa 1.3.6.1.4.1.2011.10.8.3
The private mib file includes the test information of the device. It is supplementary for rfc2925.txt.
MODULE-IDENTITY    

h3cNqaObjects 1.3.6.1.4.1.2011.10.8.3.1
OBJECT IDENTIFIER    

h3cNqaImplementationTypeDomains 1.3.6.1.4.1.2011.10.8.3.2
OBJECT IDENTIFIER    

h3cNqaUdpEcho 1.3.6.1.4.1.2011.10.8.3.2.1
Indicates that an implementation is using the UDP based echo server. Notes: The h3cNqaCtlTargetPort and h3cNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, h3cNqaCtlTargetPort must be set to the default value.
Status: current Access: read-only
OBJECT-IDENTITY    

h3cNqaTcpconnect 1.3.6.1.4.1.2011.10.8.3.2.2
Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The h3cNqaCtlTargetPort and h3cNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, h3cNqaCtlTargetPort must be set to the default value.
Status: current Access: read-only
OBJECT-IDENTITY    

h3cNqajitter 1.3.6.1.4.1.2011.10.8.3.2.3
Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis.
Status: current Access: read-only
OBJECT-IDENTITY    

h3cNqaHttp 1.3.6.1.4.1.2011.10.8.3.2.4
Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL.
Status: current Access: read-only
OBJECT-IDENTITY    

h3cNqadlsw 1.3.6.1.4.1.2011.10.8.3.2.5
Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer.
Status: current Access: read-only
OBJECT-IDENTITY    

h3cNqadhcp 1.3.6.1.4.1.2011.10.8.3.2.6
Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation.
Status: current Access: read-only
OBJECT-IDENTITY    

h3cNqaftp 1.3.6.1.4.1.2011.10.8.3.2.7
Indicates that an implementation is using tcp packet for ftp connect and data transfer.
Status: current Access: read-only
OBJECT-IDENTITY    

h3cNqaMIBVersion 1.3.6.1.4.1.2011.10.8.3.1.1
Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB'
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

h3cNqaCtlTable 1.3.6.1.4.1.2011.10.8.3.1.2
Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaCtlEntry

h3cNqaCtlEntry 1.3.6.1.4.1.2011.10.8.3.1.2.1
Defines an entry in the h3cNqaCtlTable. The operation of this table is same as that of pingResultsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaCtlEntry  

h3cNqaCtlTargetPort 1.3.6.1.4.1.2011.10.8.3.1.2.1.1
The destination port that may be used by udpEcho, tcpConnect and jitter probes.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

h3cNqaCtlSourcePort 1.3.6.1.4.1.2011.10.8.3.1.2.1.2
The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..65536  

h3cNqaCtlTTL 1.3.6.1.4.1.2011.10.8.3.1.2.1.3
Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

h3cNqaCtlJitterAdminInterval 1.3.6.1.4.1.2011.10.8.3.1.2.1.4
Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 0..60000  

h3cNqaCtlJitterAdminNumPackets 1.3.6.1.4.1.2011.10.8.3.1.2.1.5
Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

h3cNqaCtlHttpOperationType 1.3.6.1.4.1.2011.10.8.3.1.2.1.6
Http operation type: get or post.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER get(1), post(2)  

h3cNqaCtlHttpOperationString 1.3.6.1.4.1.2011.10.8.3.1.2.1.7
Http operation string. For example, if the http operation type is get, the string will be url, home page and http version.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

h3cNqaCtlFtpOperationType 1.3.6.1.4.1.2011.10.8.3.1.2.1.8
Ftp operation type.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER get(1), put(2)  

h3cNqaCtlFtpUsername 1.3.6.1.4.1.2011.10.8.3.1.2.1.9
Ftp username.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

h3cNqaCtlFtpPassword 1.3.6.1.4.1.2011.10.8.3.1.2.1.10
Ftp password.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..32)  

h3cNqaCtlFtpOperationString 1.3.6.1.4.1.2011.10.8.3.1.2.1.11
Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

h3cNqaCtlVPNInstance 1.3.6.1.4.1.2011.10.8.3.1.2.1.12
VPN name by which system finds route in the specified VPN to send NQA probe packets.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

h3cNqaCtlHistoryKeptTime 1.3.6.1.4.1.2011.10.8.3.1.2.1.13
To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.
Status: current Access: read-create
OBJECT-TYPE    
  Integer32 1..1440  

h3cNqaCtlHistoryEnable 1.3.6.1.4.1.2011.10.8.3.1.2.1.14
To indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

h3cNqaCtlICPIFAdvFactor 1.3.6.1.4.1.2011.10.8.3.1.2.1.15
The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------|
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

h3cNqaCtlCodecType 1.3.6.1.4.1.2011.10.8.3.1.2.1.16
To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER notDefined(1), g711Alaw(2), g711Ulaw(3), g729A(4), icmpTimestamp(5)  

h3cNqaResultsTable 1.3.6.1.4.1.2011.10.8.3.1.3
Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the h3cNqaResultsTable. The operation of this table is same as that of pingResultsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaResultsEntry

h3cNqaResultsEntry 1.3.6.1.4.1.2011.10.8.3.1.3.1
The operation of this table is same as that of pingResultsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaResultsEntry  

h3cNqaResultsRttNumDisconnects 1.3.6.1.4.1.2011.10.8.3.1.3.1.1
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsRttTimeouts 1.3.6.1.4.1.2011.10.8.3.1.3.1.2
The number of times that a NQA probe failed because the probe timed out.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsRttBusies 1.3.6.1.4.1.2011.10.8.3.1.3.1.3
The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsRttNoConnections 1.3.6.1.4.1.2011.10.8.3.1.3.1.4
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsRttDrops 1.3.6.1.4.1.2011.10.8.3.1.3.1.5
The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsRttSequenceErrors 1.3.6.1.4.1.2011.10.8.3.1.3.1.6
The number of packets arrived out of sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsRttStatsErrors 1.3.6.1.4.1.2011.10.8.3.1.3.1.7
The number of some other errors.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsMaxDelaySD 1.3.6.1.4.1.2011.10.8.3.1.3.1.8
The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsMaxDelayDS 1.3.6.1.4.1.2011.10.8.3.1.3.1.9
The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsLostPacketRatio 1.3.6.1.4.1.2011.10.8.3.1.3.1.10
The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsPacketLateArrival 1.3.6.1.4.1.2011.10.8.3.1.3.1.11
The value of this object indicates the number of the packets that arrived after the timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsRttSum 1.3.6.1.4.1.2011.10.8.3.1.3.1.12
The sum of round trip time.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsNumOfDelaySD 1.3.6.1.4.1.2011.10.8.3.1.3.1.13
The number of delay from source to destination that are successfully measured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsMinDelaySD 1.3.6.1.4.1.2011.10.8.3.1.3.1.14
The minimum of all one way times from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsSumDelaySD 1.3.6.1.4.1.2011.10.8.3.1.3.1.15
The sum of one way times from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsSum2DelaySD 1.3.6.1.4.1.2011.10.8.3.1.3.1.16
The sum of squares of one way times from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsNumOfDelayDS 1.3.6.1.4.1.2011.10.8.3.1.3.1.17
The number of delay from destination to source that are successfully measured.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsMinDelayDS 1.3.6.1.4.1.2011.10.8.3.1.3.1.18
The minimum of all one way times from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsSumDelayDS 1.3.6.1.4.1.2011.10.8.3.1.3.1.19
The sum of one way times from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaResultsSum2DelayDS 1.3.6.1.4.1.2011.10.8.3.1.3.1.20
The sum of squares of one way times from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaJitterStatsTable 1.3.6.1.4.1.2011.10.8.3.1.4
Statistics table for latest jitter activity.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaJitterStatsEntry

h3cNqaJitterStatsEntry 1.3.6.1.4.1.2011.10.8.3.1.4.1
An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is h3cNqajitter.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaJitterStatsEntry  

h3cNqaJitterStatsNumOfRTT 1.3.6.1.4.1.2011.10.8.3.1.4.1.1
The number of received destination device responses with which jitter test can reach round-trip time.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaJitterStatsMinOfPositivesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.2
The value of time that records the minimal positive jitter value from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsMaxOfPositivesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.3
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsNumOfPositivesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.4
The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsSumOfPositivesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.5
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsSum2PositivesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.6
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsMinOfNegativesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.7
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsMaxOfNegativesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.8
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsNumOfNegativesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.9
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsSumOfNegativesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.10
The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsSum2NegativesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.11
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsMinOfPositivesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.12
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsMaxOfPositivesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.13
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsNumOfPositivesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.14
The number that records positive jitter times from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsSumOfPositivesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.15
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsSum2PositivesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.16
The value of time that records the sum of square of positive jitter values from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsMinOfNegativesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.17
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsMaxOfNegativesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.18
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsNumOfNegativesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.19
The number that records negative jitter times from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsSumOfNegativesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.20
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsSum2NegativesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.21
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsPacketLossSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.22
The lost packets number sent from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsPacketLossDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.23
The lost packets number sent from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsAvePositivesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.24
The value of time that records the average positive jitter value from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsAveNegativesSD 1.3.6.1.4.1.2011.10.8.3.1.4.1.25
The value of time that records the average negative jitter value from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsAvePositivesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.26
The value of time that records the average positive jitter value from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsAveNegativesDS 1.3.6.1.4.1.2011.10.8.3.1.4.1.27
The value of time that records the average negative jitter value from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsPktLossUnknown 1.3.6.1.4.1.2011.10.8.3.1.4.1.28
The number of packets which is lost with unknown reason.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsOperOfICPIF 1.3.6.1.4.1.2011.10.8.3.1.4.1.29
The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaJitterStatsOperOfMOS 1.3.6.1.4.1.2011.10.8.3.1.4.1.30
The MOS (Mean Opinion Score) value for the latest jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaAgentEnable 1.3.6.1.4.1.2011.10.8.3.1.5
Enable NQA agent function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cNqaTcpServerTable 1.3.6.1.4.1.2011.10.8.3.1.6
A table which contains the status of NQA tcp server configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaTcpServerEntry

h3cNqaTcpServerEntry 1.3.6.1.4.1.2011.10.8.3.1.6.1
A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaTcpServerEntry  

h3cNqaTcpServerIpAddress 1.3.6.1.4.1.2011.10.8.3.1.6.1.1
Tcp server's ip address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

h3cNqaTcpServerPort 1.3.6.1.4.1.2011.10.8.3.1.6.1.2
Tcp server's port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65536  

h3cNqaTcpServerRowStatus 1.3.6.1.4.1.2011.10.8.3.1.6.1.3
h3cNqaTcpServerIpAddress and h3cNqaTcpServerPort must be set during a creation operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cNqaUdpServerTable 1.3.6.1.4.1.2011.10.8.3.1.7
Status of NQA udp server configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaUdpServerEntry

h3cNqaUdpServerEntry 1.3.6.1.4.1.2011.10.8.3.1.7.1
This entry includes not only the udp server ip address but also the udp server udp port.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaUdpServerEntry  

h3cNqaUdpServerIpAddress 1.3.6.1.4.1.2011.10.8.3.1.7.1.1
Udp server's ip address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

h3cNqaUdpServerPort 1.3.6.1.4.1.2011.10.8.3.1.7.1.2
Udp server's port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..65536  

h3cNqaUdpServerRowStatus 1.3.6.1.4.1.2011.10.8.3.1.7.1.3
h3cNqaUdpServerIpAddress and h3cNqaUdpServerPort must be set during a creation operation.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cNqaServerEnable 1.3.6.1.4.1.2011.10.8.3.1.8
Enable NQA server function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cNqaStatsMaxGroupNumber 1.3.6.1.4.1.2011.10.8.3.1.9
The maximum number saved per group. The maximum value of h3cNqaCtlStatisticsGroupNumber can not exceed the value of this object.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cNqaStatisticsCtlTable 1.3.6.1.4.1.2011.10.8.3.1.10
Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the h3cNqaStatisticsResultsTable and the h3cNqaGroupStatsJitterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaStatisticsCtlEntry

h3cNqaStatisticsCtlEntry 1.3.6.1.4.1.2011.10.8.3.1.10.1
Defines an entry in the h3cNqaStatisticsCtlTable. The h3cNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a h3cNqaStatisticsCtlTable to correspond to the pingCtlEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaStatisticsCtlEntry  

h3cNqaCtlStatisticsInterval 1.3.6.1.4.1.2011.10.8.3.1.10.1.1
Statistic information will be calculated after the time that is the value of h3cNqaCtlStatisticsInterval.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cNqaCtlStatisticsGroupNumber 1.3.6.1.4.1.2011.10.8.3.1.10.1.2
The value of this object indicates the number of group saved. The length of this object is from 1 to h3cNqaStatsMaxGroupNumber.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cNqaCtlStatisticsKeptTime 1.3.6.1.4.1.2011.10.8.3.1.10.1.3
To indicate how long the statistic information will be saved after the test stops.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..1440  

h3cNqaCtlBeginTime 1.3.6.1.4.1.2011.10.8.3.1.10.1.4
Time at which the type-specified test will start.
Status: current Access: read-create
OBJECT-TYPE    
  DateAndTime  

h3cNqaCtlLifeTime 1.3.6.1.4.1.2011.10.8.3.1.10.1.5
To indicate how long the type-specified test will last.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cNqaStatisticsResultsTable 1.3.6.1.4.1.2011.10.8.3.1.11
Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the h3cNqaStatisticsResultsTable. The statistic cycle is the value of h3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (H3cNqaStatisticsResultsEntry) belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaStatisticsResultsEntry

h3cNqaStatisticsResultsEntry 1.3.6.1.4.1.2011.10.8.3.1.11.1
Defines an entry in the h3cNqaStatisticsResultsTable. The h3cNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a h3cNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaStatisticsResultsEntry  

h3cNqaStatResIndex 1.3.6.1.4.1.2011.10.8.3.1.11.1.1
An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning h3cNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

h3cNqaStatResIpTargetAddressType 1.3.6.1.4.1.2011.10.8.3.1.11.1.2
This object indicates the type of address stored in the corresponding h3cNqaStatResIpTargetAddress object.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

h3cNqaStatResIpTargetAddress 1.3.6.1.4.1.2011.10.8.3.1.11.1.3
This object represent the host address to be used at a remote host for performing a network analysis operation.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

h3cNqaStatResMinRtt 1.3.6.1.4.1.2011.10.8.3.1.11.1.4
The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResMaxRtt 1.3.6.1.4.1.2011.10.8.3.1.11.1.5
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResAverageRtt 1.3.6.1.4.1.2011.10.8.3.1.11.1.6
The average NQA probe round-trip-time (RTT).
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResProbeResponses 1.3.6.1.4.1.2011.10.8.3.1.11.1.7
The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResSentProbes 1.3.6.1.4.1.2011.10.8.3.1.11.1.8
The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResRttSumOfSquares 1.3.6.1.4.1.2011.10.8.3.1.11.1.9
This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResStartTime 1.3.6.1.4.1.2011.10.8.3.1.11.1.10
This object contains the start time of the statistic.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cNqaStatResInterval 1.3.6.1.4.1.2011.10.8.3.1.11.1.11
This object contains the interval between two times of statistic.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResRttNumDisconnects 1.3.6.1.4.1.2011.10.8.3.1.11.1.12
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResRttTimeouts 1.3.6.1.4.1.2011.10.8.3.1.11.1.13
The number of times that a probe failed because the probe timed out.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResRttBusies 1.3.6.1.4.1.2011.10.8.3.1.11.1.14
The number of times that a NQA probe failed because errors related to sockets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResRttNoConnections 1.3.6.1.4.1.2011.10.8.3.1.11.1.15
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResRttDrops 1.3.6.1.4.1.2011.10.8.3.1.11.1.16
The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResRttSequenceErrors 1.3.6.1.4.1.2011.10.8.3.1.11.1.17
The number of packets arrived out of sequence.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResRttErrors 1.3.6.1.4.1.2011.10.8.3.1.11.1.18
The number of other errors.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResLostPacketRatio 1.3.6.1.4.1.2011.10.8.3.1.11.1.19
The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResPacketLateArrival 1.3.6.1.4.1.2011.10.8.3.1.11.1.20
The value of this object reflects the number of the packets that arrived after the timeout.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResRttSum 1.3.6.1.4.1.2011.10.8.3.1.11.1.21
This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResNumOfDelaySD 1.3.6.1.4.1.2011.10.8.3.1.11.1.22
The number of one way times from source to destination that are successfully measured.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResMinDelaySD 1.3.6.1.4.1.2011.10.8.3.1.11.1.23
The minimum one way times from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResMaxDelaySD 1.3.6.1.4.1.2011.10.8.3.1.11.1.24
The maximum one way times from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResSumDelaySD 1.3.6.1.4.1.2011.10.8.3.1.11.1.25
The sum of one way times from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResSum2DelaySD 1.3.6.1.4.1.2011.10.8.3.1.11.1.26
The sum of squares of one way times from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResNumOfDelayDS 1.3.6.1.4.1.2011.10.8.3.1.11.1.27
The number of one way times from destination to source that are successfully measured.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResMinDelayDS 1.3.6.1.4.1.2011.10.8.3.1.11.1.28
The minimum one way times from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResMaxDelayDS 1.3.6.1.4.1.2011.10.8.3.1.11.1.29
The maximum one way times from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatResSumDelayDS 1.3.6.1.4.1.2011.10.8.3.1.11.1.30
The sum of one way times from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatResSum2DelayDS 1.3.6.1.4.1.2011.10.8.3.1.11.1.31
The sum of squares of one way times from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaGroupStatsJitterTable 1.3.6.1.4.1.2011.10.8.3.1.12
Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of h3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (H3cNqaStatisticsResultsEntry) belongs to.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaGroupStatsJitterEntry

h3cNqaGroupStatsJitterEntry 1.3.6.1.4.1.2011.10.8.3.1.12.1
An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is h3cNqajitter.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaGroupStatsJitterEntry  

h3cNqaStatJitterIndex 1.3.6.1.4.1.2011.10.8.3.1.12.1.1
An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning h3cNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..ffffffff  

h3cNqaStatJitterMinOfPosSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.2
The value of time that records the minimal positive jitter value from source to destination in jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterMaxOfPosSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.3
The value of time that records the maximal positive jitter value from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterNumOfPosSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.4
The number that records positive jitter times from source to destination in the jitter test. The total number of all positive jitter values in packets sent from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterSumOfPosSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.5
The value of time that records the sum of positive jitter values from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterSumOfSquarePosSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.6
The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterMinOfNegSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.7
The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterMaxOfNegSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.8
The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterNumOfNegSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.9
The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values sent from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterSumOfNegSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.10
The value of time that records the sum of negative jitter values from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterSumOfSquareNegSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.11
The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterMinOfPosDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.12
The value of time that records the minimal positive jitter value from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterMaxOfPosDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.13
The value of time that records the maximal positive jitter value from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterNumOfPosDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.14
The number that records positive jitter times from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterSumOfPosDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.15
The value of time that records the sum of positive jitter values from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterSumOfSquarePosDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.16
The value of time that records the sum of square of positive jitter values destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterMinOfNegDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.17
The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterMaxOfNegDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.18
The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterNumOfNegDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.19
The number that records negative jitter times from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterSumOfNegDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.20
The value of time that records the sum of negative jitter values from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterSumOfSquareNegDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.21
The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterPacketLossSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.22
The lost packets number sent from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterPacketLossDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.23
The lost packets number sent from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterAvePosSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.24
The value of time that records the average positive jitter value from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterAveNegSD 1.3.6.1.4.1.2011.10.8.3.1.12.1.25
The value of time that records the average negative jitter value from source to destination.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterAvePosDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.26
The value of time that records the average positive jitter value from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterAveNegDS 1.3.6.1.4.1.2011.10.8.3.1.12.1.27
The value of time that records the average negative jitter value from destination to source.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterPktLossUnknown 1.3.6.1.4.1.2011.10.8.3.1.12.1.28
The number of packets which is lost with unknown reason.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatJitterMaxOfICPIF 1.3.6.1.4.1.2011.10.8.3.1.12.1.29
The maximum of all ICPIF values in a statistic cycle for jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterMinOfICPIF 1.3.6.1.4.1.2011.10.8.3.1.12.1.30
The minimum of all ICPIF values in a statistic cycle for jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterMaxOfMOS 1.3.6.1.4.1.2011.10.8.3.1.12.1.31
The maximum of all MOS values in a statistic cycle for jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaStatJitterMinOfMOS 1.3.6.1.4.1.2011.10.8.3.1.12.1.32
The minimum of all MOS values in a statistic cycle for jitter test.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

h3cNqaReactionTable 1.3.6.1.4.1.2011.10.8.3.1.13
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaReactionEntry

h3cNqaReactionEntry 1.3.6.1.4.1.2011.10.8.3.1.13.1
Defines an entry in the h3cNqaReactionTable. The first two index elements identify the pingCtlEntry that a h3cNqaReactItemIndex belongs to. The third index element selects a single reaction.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaReactionEntry  

h3cNqaReactOwnerIndex 1.3.6.1.4.1.2011.10.8.3.1.13.1.1
The first index of h3cNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. h3cNqaReactOwnerIndex and h3cNqaReactTestName identify an existed test.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

h3cNqaReactTestName 1.3.6.1.4.1.2011.10.8.3.1.13.1.2
The second index of h3cNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. h3cNqaReactOwnerIndex and h3cNqaReactTestName identify an existed test.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

h3cNqaReactItemIndex 1.3.6.1.4.1.2011.10.8.3.1.13.1.3
The third index of h3cNqaReactionTable, it definitely identifies one of the reaction configurations for a test.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..10  

h3cNqaReactCheckedElement 1.3.6.1.4.1.2011.10.8.3.1.13.1.4
A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not h3cNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is h3cNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER probetime(1), probefailure(2), jitterrtt(3), jitterpacketloss(4), jittersd(5), jitterds(6), icpif(7), mos(8), jitterOwdSD(9), jitterOwdDS(10)  

h3cNqaReactThresholdUpperLimit 1.3.6.1.4.1.2011.10.8.3.1.13.1.5
This object defines an administrative upper-threshold value for h3cNqaReactCheckedElement. The value of this object is zero if h3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cNqaReactThresholdLowerLimit 1.3.6.1.4.1.2011.10.8.3.1.13.1.6
This object defines an administrative lower-threshold value for h3cNqaReactCheckedElement. The value of h3cNqaReactThresholdLowerLimit should be equal or less than the value of h3cNqaReactThresholdUpperLimit. The value of this object is zero if h3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cNqaReactThresholdType 1.3.6.1.4.1.2011.10.8.3.1.13.1.7
This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by h3cNqaReactThresholdConsecNum, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by h3cNqaReactThresholdAccumNum, an action specified in h3cNqaReactActionType is generated when h3cNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER invalid(0), average(1), consecutive(2), accumulative(3)  

h3cNqaReactThresholdConsecNum 1.3.6.1.4.1.2011.10.8.3.1.13.1.8
This object defines a consecutive threshold limit. The value is zero when h3cNqaReactThresholdType is not 'consecutive'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cNqaReactThresholdAccumNum 1.3.6.1.4.1.2011.10.8.3.1.13.1.9
This object defines an accumulative threshold limit. The value is zero when the h3cNqaReactThresholdType is not 'accumulative'.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cNqaReactActionType 1.3.6.1.4.1.2011.10.8.3.1.13.1.10
Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generated
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(0), trapOnly(1), triggerOnly(2), trapAndTrigger(3)  

h3cNqaReactCurrentStatus 1.3.6.1.4.1.2011.10.8.3.1.13.1.11
Specifies the current status of this reaction entry: invalid - Specifies the reaction entry status is uncertain. overThreshold - Specifies the reaction entry has met the h3cNqaReactThresholdType and the threshold value. belowThreshold - Specifies the reaction entry has disobeyed the h3cNqaReactThresholdType and the threshold value.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), overThreshold(2), belowThreshold(3)  

h3cNqaReactRowStatus 1.3.6.1.4.1.2011.10.8.3.1.13.1.12
This object allows entries to be created and deleted in the h3cNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cNqaReactCheckedNum 1.3.6.1.4.1.2011.10.8.3.1.13.1.13
The number of checked element samples that are monitored.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaReactThresholdNum 1.3.6.1.4.1.2011.10.8.3.1.13.1.14
The number of checked element samples that are over threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cNqaStatisticsReactionTable 1.3.6.1.4.1.2011.10.8.3.1.14
A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNqaStatisticsReactionEntry

h3cNqaStatisticsReactionEntry 1.3.6.1.4.1.2011.10.8.3.1.14.1
Defines an entry in the h3cNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a h3cNqaReactItemIndex belongs to. The third index element identifies an entry in the h3cNqaStatisticsResultsTable. The forth index element selects a single reaction.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cNqaStatisticsReactionEntry  

h3cNqaStatReactOwnerIndex 1.3.6.1.4.1.2011.10.8.3.1.14.1.1
The first index of h3cNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

h3cNqaStatReactTestName 1.3.6.1.4.1.2011.10.8.3.1.14.1.2
The second index of h3cNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

h3cNqaStatReactIndex 1.3.6.1.4.1.2011.10.8.3.1.14.1.3
The third index of h3cNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning h3cNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

h3cNqaStatReactItemIndex 1.3.6.1.4.1.2011.10.8.3.1.14.1.4
The forth index of h3cNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

h3cNqaStatReactCheckedNum 1.3.6.1.4.1.2011.10.8.3.1.14.1.5
The number of checked element samples that are monitored.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaStatReactThresholdNum 1.3.6.1.4.1.2011.10.8.3.1.14.1.6
The number of checked element samples that are over threshold.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

h3cNqaNotifications 1.3.6.1.4.1.2011.10.8.3.3
OBJECT IDENTIFIER    

h3cNqaProbeTimeOverThreshold 1.3.6.1.4.1.2011.10.8.3.3.1
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdConsecNum. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not h3cNqajitter.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cNqaJitterRTTOverThreshold 1.3.6.1.4.1.2011.10.8.3.3.2
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum in one test. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cNqaProbeFailure 1.3.6.1.4.1.2011.10.8.3.3.3
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in h3cNqaReactThresholdAccumNum in one test while the value of h3cNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in h3cNqaReactThresholdConsecNum in one test while the value of h3cNqaReactThresholdType is 'consecutive'. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not h3cNqajitter.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cNqaJitterPacketLoss 1.3.6.1.4.1.2011.10.8.3.3.4
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in h3cNqaReactThresholdAccumNum in one test while the value of h3cNqaReactThresholdType is 'accumulative'. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cNqaJitterSDOverThreshold 1.3.6.1.4.1.2011.10.8.3.3.5
The SD means the jitter values from source to destination. It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit and the h3cNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum and the h3cNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cNqaJitterDSOverThreshold 1.3.6.1.4.1.2011.10.8.3.3.6
The DS means the jitter values from destination to source. It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit and the h3cNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit for a number of times specified in h3cNqaReactThresholdAccumNum and the h3cNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is h3cNqajitter.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cNqaICPIFOverThreshold 1.3.6.1.4.1.2011.10.8.3.3.7
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cNqaMOSOverThreshold 1.3.6.1.4.1.2011.10.8.3.3.8
It is generated when the value of h3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range h3cNqaReactThresholdLowerLimit through h3cNqaReactThresholdUpperLimit. This notification is valid only when h3cNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
Status: current Access: read-only
NOTIFICATION-TYPE