H3C-NAT-MIB

File: H3C-NAT-MIB.mib (59450 bytes)

Imported modules

HUAWEI-3COM-OID-MIB RFC1213-MIB SNMPv2-SMI
SNMPv2-TC

Imported symbols

h3cCommon ifIndex TimeTicks
IpAddress Integer32 Counter32
OBJECT-TYPE MODULE-IDENTITY RowStatus
DisplayString

Defined Types

H3cNATPoolInfoEntry  
SEQUENCE    
  h3cNATPoolIdx Integer32
  h3cNATPoolStartIpAddr IpAddress
  h3cNATPoolEndIpAddr IpAddress
  h3cNATPoolSlotNo INTEGER
  h3cNATPoolRefCounter Integer32
  h3cNATPoolRowStatus RowStatus

H3cNATOutboundEntry  
SEQUENCE    
  h3cNATOutboundAclNo INTEGER
  h3cNATOutboundPoolIdx INTEGER
  h3cNATOutboundIsNoPat INTEGER
  h3cNATOutboundSlotNo Integer32
  h3cNATOutboundRowStatus RowStatus

H3cNATServerEntry  
SEQUENCE    
  h3cNATServerProType INTEGER
  h3cNATServerGlobalIP IpAddress
  h3cNATServerStartGlobalPort INTEGER
  h3cNATServerEndGlobalPort INTEGER
  h3cNATServerStartInsideIP IpAddress
  h3cNATServerEndInsideIP IpAddress
  h3cNATServerInsidePort INTEGER
  h3cNATServerSlotNo Integer32
  h3cNATServerVpnIndex Integer32
  h3cNATServerAclNumber Integer32
  h3cNATServerRowStatus RowStatus

H3cNATTimeOutEntry  
SEQUENCE    
  h3cNATTimeOutProtocol INTEGER
  h3cNATTimeOutTimeValue INTEGER

H3cNATBLEnableEntry  
SEQUENCE    
  h3cNATBLEnableSlotNo Integer32
  h3cNATBLEnable INTEGER

H3cNATBLIPConnectLimitParaEntry  
SEQUENCE    
  h3cNATBLIPConnectLimitParaIP IpAddress
  h3cNATBLIPConnectHighValue INTEGER
  h3cNATBLIPConnectLowValue INTEGER
  h3cNATBLIPUseSpecialConnectRate INTEGER
  h3cNATBLIPConnectLimitRowStatus RowStatus

H3cNATBLManagerEntry  
SEQUENCE    
  h3cNATBLIpAdress IpAddress
  h3cNATBLSlotNo INTEGER
  h3cNATBLConSum Integer32
  h3cNATBLConSpd INTEGER

H3cNATStatEntry  
SEQUENCE    
  h3cNATStatNATBoardNo Integer32
  h3cNATStatActiveTblCount Counter32
  h3cNATStatActiveTblCountInNP Counter32
  h3cNATStatActiveNatTblCount Counter32
  h3cNATStatActiveSvrTblCount Counter32
  h3cNATStatActivePoolTblCount Counter32
  h3cNATStatNumOfUsedPort Counter32
  h3cNATStatNumOfGoodPkt Counter32
  h3cNATStatNumOfBadPkt Counter32
  h3cNATStaticSessionCount Integer32
  h3cNATFragmentSessionCount Integer32
  h3cNATSequenceSessionCount Integer32
  h3cNATLogCount Integer32

H3cNATSessionEntry  
SEQUENCE    
  h3cNATSessionHashNumber Integer32
  h3cNATSessionProtocol INTEGER
  h3cNATSessionGlobalIP IpAddress
  h3cNATSessionGlobalPort Integer32
  h3cNATSessionInsideIP IpAddress
  h3cNATSessionInsidePort Integer32
  h3cNATSessionPeerIP IpAddress
  h3cNATSessionPeerPort Integer32
  h3cNATSessionVpnIndex Integer32
  h3cNATSessionTTL Integer32
  h3cNATSessionStatus Integer32
  h3cNATSessionLeftTime TimeTicks

H3cNATStaticConfEntry  
SEQUENCE    
  h3cNATStaticInsideIp IpAddress
  h3cNATStaticGlobalIp IpAddress
  h3cNATStaticRowStatus RowStatus

H3cNATStaticEnableEntry  
SEQUENCE    
  h3cNATStaticEnable INTEGER

H3cNATDnsMapEntry  
SEQUENCE    
  h3cNATDnsMapDomainName DisplayString
  h3cNATDnsMapGlobalIp IpAddress
  h3cNATDnsMapGlobalPort Integer32
  h3cNATDnsMapProtocolType INTEGER
  h3cNATDnsMapLastUseTime TimeTicks
  h3cNATDnsMapRowStatus RowStatus

Defined Values

h3cNat 1.3.6.1.4.1.2011.10.2.18
This MIB contains objects to manage configuration of NAT. There are no constraints on this MIB.
MODULE-IDENTITY    

h3cNATGlobalVars 1.3.6.1.4.1.2011.10.2.18.1
OBJECT IDENTIFIER    

h3cNATClearSession 1.3.6.1.4.1.2011.10.2.18.1.1
OBJECT IDENTIFIER    

h3cNATClearSessionSlotNo 1.3.6.1.4.1.2011.10.2.18.1.1.1
The number of NAT board in which administrator wants to clear data of the session. In router, the value is 255 because no NAT board in it. This node only supports 'set' operation. The return value of 'get' operation is meaningless.
OBJECT-TYPE    
  INTEGER 1..14 | 255  

h3cNATBLConnectLimitPara 1.3.6.1.4.1.2011.10.2.18.1.2
OBJECT IDENTIFIER    

h3cNATBLConnectHighValue 1.3.6.1.4.1.2011.10.2.18.1.2.1
The maximal connection amount. If the connection amount exceeds the value, the IP address will be added into blacklist. The IP address will not be removed from blacklist until the connection amount is less than the minimal connection amount.
OBJECT-TYPE    
  INTEGER 20..20000  

h3cNATBLConnectLowValue 1.3.6.1.4.1.2011.10.2.18.1.2.2
The minimal connection amount.
OBJECT-TYPE    
  INTEGER 20..20000  

h3cNATBLConnectHighRate 1.3.6.1.4.1.2011.10.2.18.1.2.3
The maximal connection rate(in second). If the connection rate exceed the value, the IP address will be added into blacklist. The IP address will not be removed from blacklist until the connection rate is less than the minimal connection rate.
OBJECT-TYPE    
  INTEGER 20..21474836  

h3cNATBLConnectLowRate 1.3.6.1.4.1.2011.10.2.18.1.2.4
The minimal connection rate(in second).
OBJECT-TYPE    
  INTEGER 20..21474836  

h3cNATBLSpecialConnectHighRate 1.3.6.1.4.1.2011.10.2.18.1.2.5
The maximal special connection rate(in second). When administrator wants to control the speed of connection, he can selects the connection speed rate or special connection rate.
OBJECT-TYPE    
  INTEGER 20..21474836  

h3cNATBLSpecialConnectLowRate 1.3.6.1.4.1.2011.10.2.18.1.2.6
The minimal special connection rate(in second).
OBJECT-TYPE    
  INTEGER 20..21474836  

h3cNATBLCtrlEnable 1.3.6.1.4.1.2011.10.2.18.1.3
OBJECT IDENTIFIER    

h3cNATBLConnectSumEnable 1.3.6.1.4.1.2011.10.2.18.1.3.1
Enable or disable the connection amount control.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cNATBLConnectRateEnable 1.3.6.1.4.1.2011.10.2.18.1.3.2
Enable or disable the connection rate control.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cNATNPTimer 1.3.6.1.4.1.2011.10.2.18.1.4
OBJECT IDENTIFIER    

h3cNATNPAgingTime 1.3.6.1.4.1.2011.10.2.18.1.4.1
There are two kinds of aging time in NP. One is fast and the other is slow. Administrator can select one or other. The defalult is fast.
OBJECT-TYPE    
  INTEGER fast(1), slow(2)  

h3cNATMibObjects 1.3.6.1.4.1.2011.10.2.18.2
OBJECT IDENTIFIER    

h3cNATPoolInfoTable 1.3.6.1.4.1.2011.10.2.18.2.1
NAT address pool table : The address in the pool is the IP address in the global network. The pool can span 255 IP addresses.All address pools configured by administrator are recorded in this table.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATPoolInfoEntry

h3cNATPoolInfoEntry 1.3.6.1.4.1.2011.10.2.18.2.1.1
The entry of NAT address pool table.
OBJECT-TYPE    
  H3cNATPoolInfoEntry  

h3cNATPoolIdx 1.3.6.1.4.1.2011.10.2.18.2.1.1.1
Index of the address pool: The index uniquely indicates the address pool in the system, and its range is from 1 to 320.
OBJECT-TYPE    
  Integer32 1..320  

h3cNATPoolStartIpAddr 1.3.6.1.4.1.2011.10.2.18.2.1.1.2
The start IP address of address pool: It must be less than or equal to the end IP address.
OBJECT-TYPE    
  IpAddress  

h3cNATPoolEndIpAddr 1.3.6.1.4.1.2011.10.2.18.2.1.1.3
The end IP address of address pool: It must be more than or equal to the start IP address.
OBJECT-TYPE    
  IpAddress  

h3cNATPoolSlotNo 1.3.6.1.4.1.2011.10.2.18.2.1.1.4
The number of NAT board to which the address pool is bound. The address translation is processed by this NAT board . The relation between address pool and slotNo is n:1. When the address pool is not bound to the NAT board,the value is 255.
OBJECT-TYPE    
  INTEGER 1..14 | 255  

h3cNATPoolRefCounter 1.3.6.1.4.1.2011.10.2.18.2.1.1.5
The counter of reference. A address pool can be associated with more than one ACL and the counter of reference is recorded in this field. When the address pool is not associated with ACL, the value is 0.
OBJECT-TYPE    
  Integer32  

h3cNATPoolRowStatus 1.3.6.1.4.1.2011.10.2.18.2.1.1.6
Only support 'destroy' and 'createAndGo'. If h3cNATPoolIdx, h3cNATPoolStartIpAddr and h3cNATPoolEndIpAddr were provided correctly, its value is changed 'active'.
OBJECT-TYPE    
  RowStatus  

h3cNATOutboundTable 1.3.6.1.4.1.2011.10.2.18.2.2
NAT out bound table: through associating ACL number, address pool with NAT board, administrator can designate which inside IP address can be translated to global IP address in the pool and the translation is processed by which NAT board.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATOutboundEntry

h3cNATOutboundEntry 1.3.6.1.4.1.2011.10.2.18.2.2.1
The entry of NAT out bound table.
OBJECT-TYPE    
  H3cNATOutboundEntry  

h3cNATOutboundAclNo 1.3.6.1.4.1.2011.10.2.18.2.2.1.1
The number of ACL(Access Control List). When the packet accords with the rule in the ACL, its source IP address will be translated to IP address in Address pool.
OBJECT-TYPE    
  INTEGER 2000..3999  

h3cNATOutboundPoolIdx 1.3.6.1.4.1.2011.10.2.18.2.2.1.2
The index of address pool in h3cNATPoolInfoTable. when administrator doesn't use the address pool and use the IP address of the interface as the address of global network, the value is 2147483647.
OBJECT-TYPE    
  INTEGER 0..320 | 2147483647  

h3cNATOutboundIsNoPat 1.3.6.1.4.1.2011.10.2.18.2.2.1.3
Whether to use no pat manner. The translation of no pat is that the translation doesn't use the port information of packet.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

h3cNATOutboundSlotNo 1.3.6.1.4.1.2011.10.2.18.2.2.1.4
The number of NAT board. In router, the value is 255 because no NAT board in it.
OBJECT-TYPE    
  Integer32 1..14 | 255  

h3cNATOutboundRowStatus 1.3.6.1.4.1.2011.10.2.18.2.2.1.5
Only support 'destroy' and 'createAndGo'. If h3cNATOutboundAclNo or h3cNATOutboundAclNo and h3cNATOutboundPoolIdx were provided correctly, its value is changed 'active'.
OBJECT-TYPE    
  RowStatus  

h3cNATServerTable 1.3.6.1.4.1.2011.10.2.18.2.3
NAT inside Server Table. Administrator can configure server in the private network which can provide service for people in the public network. The translation map is : (InsideIP , InsidePort--> GlobalIP, GlobalPort ) (InsideIP + 1 , InsidePort--> GlobalIP, GlobalPort + 1) (InsideIP + 2 , InsidePort--> GlobalIP, GlobalPort + 2) ... ... ... (InsideIP+n(=InsideIP2),InsidePort--> GlobalIP,GlobalPort+n(=GlobalPort2))
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATServerEntry

h3cNATServerEntry 1.3.6.1.4.1.2011.10.2.18.2.3.1
The entry of NAT inside server table.
OBJECT-TYPE    
  H3cNATServerEntry  

h3cNATServerProType 1.3.6.1.4.1.2011.10.2.18.2.3.1.1
The type of protocol: icmp(1), tcp(6), udp(17) and others.
OBJECT-TYPE    
  INTEGER 1..255  

h3cNATServerGlobalIP 1.3.6.1.4.1.2011.10.2.18.2.3.1.2
The global IP address of Inside Server.
OBJECT-TYPE    
  IpAddress  

h3cNATServerStartGlobalPort 1.3.6.1.4.1.2011.10.2.18.2.3.1.3
The start global port of Inside Server. When the port need not be configured, the value is 0.
OBJECT-TYPE    
  INTEGER 0..65535  

h3cNATServerEndGlobalPort 1.3.6.1.4.1.2011.10.2.18.2.3.1.4
The end global port of Inside Server. When administrator doesn't configure a series of inside server, the value is 0. If the value is not zero, the value of (GlobalPort2-GlobalPort) must be equal to (InsideIP2 - InsideIP).
OBJECT-TYPE    
  INTEGER 0..65535  

h3cNATServerStartInsideIP 1.3.6.1.4.1.2011.10.2.18.2.3.1.5
The start private IP address of Inside Server.
OBJECT-TYPE    
  IpAddress  

h3cNATServerEndInsideIP 1.3.6.1.4.1.2011.10.2.18.2.3.1.6
The end private IP address of Inside Server. When administrator doesn't configure a series of inside server, the value is 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

h3cNATServerInsidePort 1.3.6.1.4.1.2011.10.2.18.2.3.1.7
The private port of Inside Server.
OBJECT-TYPE    
  INTEGER 0..65535  

h3cNATServerSlotNo 1.3.6.1.4.1.2011.10.2.18.2.3.1.8
The number of NAT board. In router, the value is 255 because no NAT board in it.
OBJECT-TYPE    
  Integer32 1..14 | 255  

h3cNATServerVpnIndex 1.3.6.1.4.1.2011.10.2.18.2.3.1.10
The VPN index of server.
OBJECT-TYPE    
  Integer32 0..65535  

h3cNATServerAclNumber 1.3.6.1.4.1.2011.10.2.18.2.3.1.11
Number of basic or advanced acl.
OBJECT-TYPE    
  Integer32 1..10000  

h3cNATServerRowStatus 1.3.6.1.4.1.2011.10.2.18.2.3.1.12
Only support 'destroy' and 'createAndGo'. If h3cNATServerProType, h3cNATServerGlobalIP, h3cNATServerGlobalPort and h3cNATServerInsideIP were provided correctly, its value is changed 'active'.
OBJECT-TYPE    
  RowStatus  

h3cNATTimeOutTable 1.3.6.1.4.1.2011.10.2.18.2.4
NAT Time out Table. When a connection is established, if there are not any actives in this connection between the time, it will be disconnected.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATTimeOutEntry

h3cNATTimeOutEntry 1.3.6.1.4.1.2011.10.2.18.2.4.1
The entry of NAT Time out Table.
OBJECT-TYPE    
  H3cNATTimeOutEntry  

h3cNATTimeOutProtocol 1.3.6.1.4.1.2011.10.2.18.2.4.1.1
The type of protocol.
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), icmp(3), pptp(4), dns(5), tcpFin(6), tcpSyn(7), ftpCtrl(8), ftpData(9)  

h3cNATTimeOutTimeValue 1.3.6.1.4.1.2011.10.2.18.2.4.1.2
The time of time out.
OBJECT-TYPE    
  INTEGER 10..86400  

h3cNATBLEnableTable 1.3.6.1.4.1.2011.10.2.18.2.5
NAT blacklist function Enable Table. In this table, administrator can decide whether to start the function of blacklist in the NAT board. When the function of blacklist can't be set for a NAT board, the number of NAT board is 256.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATBLEnableEntry

h3cNATBLEnableEntry 1.3.6.1.4.1.2011.10.2.18.2.5.1
The entry of NAT blacklist Enable Table.
OBJECT-TYPE    
  H3cNATBLEnableEntry  

h3cNATBLEnableSlotNo 1.3.6.1.4.1.2011.10.2.18.2.5.1.1
The number of NAT board. When the function of blacklist can't be set for a NAT board, the value is 255.
OBJECT-TYPE    
  Integer32 1..14 | 255  

h3cNATBLEnable 1.3.6.1.4.1.2011.10.2.18.2.5.1.2
Start or stop of function of balcklist.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h3cNATBLIPConnectLimitParaTable 1.3.6.1.4.1.2011.10.2.18.2.6
The table of connection control of special IP address. In this table, administrator can decide to adopt which manner to control the connection which IP address is the special IP address.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATBLIPConnectLimitParaEntry

h3cNATBLIPConnectLimitParaEntry 1.3.6.1.4.1.2011.10.2.18.2.6.1
The entry of the table of connection control of special IP address.
OBJECT-TYPE    
  H3cNATBLIPConnectLimitParaEntry  

h3cNATBLIPConnectLimitParaIP 1.3.6.1.4.1.2011.10.2.18.2.6.1.1
The special IP address. The IP is private IP address.
OBJECT-TYPE    
  IpAddress  

h3cNATBLIPConnectHighValue 1.3.6.1.4.1.2011.10.2.18.2.6.1.2
The maximal connection amount. It must be more than the minimal connection amount.
OBJECT-TYPE    
  INTEGER 20..20000  

h3cNATBLIPConnectLowValue 1.3.6.1.4.1.2011.10.2.18.2.6.1.3
The minimal connection amount. It must be less than the maximal connection amount.
OBJECT-TYPE    
  INTEGER 20..20000  

h3cNATBLIPUseSpecialConnectRate 1.3.6.1.4.1.2011.10.2.18.2.6.1.4
Whether to use the special connection rate control.
OBJECT-TYPE    
  INTEGER true(1), false(2)  

h3cNATBLIPConnectLimitRowStatus 1.3.6.1.4.1.2011.10.2.18.2.6.1.5
Only support 'destroy' and 'createAndGo'. If h3cNATBLIPConnectHighValue, h3cNATBLIPConnectLowValue and h3cNATBLIPUseSpecialConnectRate were provided correctly, its value is changed 'active'.
OBJECT-TYPE    
  RowStatus  

h3cNATBLManagerTable 1.3.6.1.4.1.2011.10.2.18.2.7
The management table of blacklist. The table doesn't support 'getnext' operation.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATBLManagerEntry

h3cNATBLManagerEntry 1.3.6.1.4.1.2011.10.2.18.2.7.1
The entry of management table of blacklist.
OBJECT-TYPE    
  H3cNATBLManagerEntry  

h3cNATBLIpAdress 1.3.6.1.4.1.2011.10.2.18.2.7.1.1
The IP address of entry of blacklist.
OBJECT-TYPE    
  IpAddress  

h3cNATBLSlotNo 1.3.6.1.4.1.2011.10.2.18.2.7.1.2
The number of NAT board.
OBJECT-TYPE    
  INTEGER 1..14  

h3cNATBLConSum 1.3.6.1.4.1.2011.10.2.18.2.7.1.3
The connection amount.
OBJECT-TYPE    
  Integer32  

h3cNATBLConSpd 1.3.6.1.4.1.2011.10.2.18.2.7.1.4
The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
OBJECT-TYPE    
  INTEGER red(1), yellow(2), green(3)  

h3cNATStatTable 1.3.6.1.4.1.2011.10.2.18.2.8
The statistics information table of NAT module.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATStatEntry

h3cNATStatEntry 1.3.6.1.4.1.2011.10.2.18.2.8.1
The entry of statistics information table of NAT module.
OBJECT-TYPE    
  H3cNATStatEntry  

h3cNATStatNATBoardNo 1.3.6.1.4.1.2011.10.2.18.2.8.1.1
The number of NAT board. In router, the value is 255 because no NAT board in it.
OBJECT-TYPE    
  Integer32 1..14 | 255  

h3cNATStatActiveTblCount 1.3.6.1.4.1.2011.10.2.18.2.8.1.2
Active PAT session count In software.
OBJECT-TYPE    
  Counter32  

h3cNATStatActiveTblCountInNP 1.3.6.1.4.1.2011.10.2.18.2.8.1.3
Active PAT session count In NP.
OBJECT-TYPE    
  Counter32  

h3cNATStatActiveNatTblCount 1.3.6.1.4.1.2011.10.2.18.2.8.1.4
Active NO-PAT session count.
OBJECT-TYPE    
  Counter32  

h3cNATStatActiveSvrTblCount 1.3.6.1.4.1.2011.10.2.18.2.8.1.5
Active SERVER session count.
OBJECT-TYPE    
  Counter32  

h3cNATStatActivePoolTblCount 1.3.6.1.4.1.2011.10.2.18.2.8.1.6
Active address pool session count.
OBJECT-TYPE    
  Counter32  

h3cNATStatNumOfUsedPort 1.3.6.1.4.1.2011.10.2.18.2.8.1.7
The number of used port in NP.
OBJECT-TYPE    
  Counter32  

h3cNATStatNumOfGoodPkt 1.3.6.1.4.1.2011.10.2.18.2.8.1.8
The number of good packet in NP.
OBJECT-TYPE    
  Counter32  

h3cNATStatNumOfBadPkt 1.3.6.1.4.1.2011.10.2.18.2.8.1.9
The number of bad packet in NP.
OBJECT-TYPE    
  Counter32  

h3cNATStaticSessionCount 1.3.6.1.4.1.2011.10.2.18.2.8.1.10
Active STATIC session count.
OBJECT-TYPE    
  Integer32  

h3cNATFragmentSessionCount 1.3.6.1.4.1.2011.10.2.18.2.8.1.11
Active fragment packet session count.
OBJECT-TYPE    
  Integer32  

h3cNATSequenceSessionCount 1.3.6.1.4.1.2011.10.2.18.2.8.1.12
Active session table count hash by private IP.
OBJECT-TYPE    
  Integer32  

h3cNATLogCount 1.3.6.1.4.1.2011.10.2.18.2.8.1.13
Buffered Nat LOG table count.
OBJECT-TYPE    
  Integer32  

h3cNATSessionTable 1.3.6.1.4.1.2011.10.2.18.2.9
The nat session information table. There is the address translation information in the table. The sketch map of connection is pc1(private Net)------------------>NAT Device ------------------>Server(public Net) InsideIP, InsidePort---->translating to GlobalIP, GlobalPort------>PeerIP, PeerPort.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATSessionEntry

h3cNATSessionEntry 1.3.6.1.4.1.2011.10.2.18.2.9.1
The entry of session information table.
OBJECT-TYPE    
  H3cNATSessionEntry  

h3cNATSessionHashNumber 1.3.6.1.4.1.2011.10.2.18.2.9.1.1
The row number of the hash table.
OBJECT-TYPE    
  Integer32 1..300000  

h3cNATSessionProtocol 1.3.6.1.4.1.2011.10.2.18.2.9.1.2
The protocol type of session.
OBJECT-TYPE    
  INTEGER 1..255  

h3cNATSessionGlobalIP 1.3.6.1.4.1.2011.10.2.18.2.9.1.3
The global IP of session.
OBJECT-TYPE    
  IpAddress  

h3cNATSessionGlobalPort 1.3.6.1.4.1.2011.10.2.18.2.9.1.4
The global port of session.
OBJECT-TYPE    
  Integer32 0..65535  

h3cNATSessionInsideIP 1.3.6.1.4.1.2011.10.2.18.2.9.1.5
The Inside IP of session.
OBJECT-TYPE    
  IpAddress  

h3cNATSessionInsidePort 1.3.6.1.4.1.2011.10.2.18.2.9.1.6
The Inside port of session.
OBJECT-TYPE    
  Integer32 0..65535  

h3cNATSessionPeerIP 1.3.6.1.4.1.2011.10.2.18.2.9.1.7
The peer IP of session.
OBJECT-TYPE    
  IpAddress  

h3cNATSessionPeerPort 1.3.6.1.4.1.2011.10.2.18.2.9.1.8
The peer port of session.
OBJECT-TYPE    
  Integer32 0..65535  

h3cNATSessionVpnIndex 1.3.6.1.4.1.2011.10.2.18.2.9.1.9
The VPN index of session.
OBJECT-TYPE    
  Integer32 0..255  

h3cNATSessionTTL 1.3.6.1.4.1.2011.10.2.18.2.9.1.10
The TTL of session.
OBJECT-TYPE    
  Integer32  

h3cNATSessionStatus 1.3.6.1.4.1.2011.10.2.18.2.9.1.11
The status of session.
OBJECT-TYPE    
  Integer32  

h3cNATSessionLeftTime 1.3.6.1.4.1.2011.10.2.18.2.9.1.12
The Left time of session.
OBJECT-TYPE    
  TimeTicks  

h3cNATStaticConfTable 1.3.6.1.4.1.2011.10.2.18.2.10
Static Nat configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATStaticConfEntry

h3cNATStaticConfEntry 1.3.6.1.4.1.2011.10.2.18.2.10.1
Configure static Nat.
OBJECT-TYPE    
  H3cNATStaticConfEntry  

h3cNATStaticInsideIp 1.3.6.1.4.1.2011.10.2.18.2.10.1.1
Inside ip address.
OBJECT-TYPE    
  IpAddress  

h3cNATStaticGlobalIp 1.3.6.1.4.1.2011.10.2.18.2.10.1.2
Global Ip address.
OBJECT-TYPE    
  IpAddress  

h3cNATStaticRowStatus 1.3.6.1.4.1.2011.10.2.18.2.10.1.3
Only support 'destroy' and 'createAndGo'. If h3cNATStaticInsideIp and h3cNATStaticGlobalIp were provided correctly, its value is changed 'active'.
OBJECT-TYPE    
  RowStatus  

h3cNATStaticEnableTable 1.3.6.1.4.1.2011.10.2.18.2.11
Active the static Nat on interface.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATStaticEnableEntry

h3cNATStaticEnableEntry 1.3.6.1.4.1.2011.10.2.18.2.11.1
Active the static Nat on interface.
OBJECT-TYPE    
  H3cNATStaticEnableEntry  

h3cNATStaticEnable 1.3.6.1.4.1.2011.10.2.18.2.11.1.2
Enable/disable the static Nat on the interface(h3cNatStaticEnableIfIndex). disable (0) enable (1)
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

h3cNATDnsMapTable 1.3.6.1.4.1.2011.10.2.18.2.12
This table is used to set mapping of DNS.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cNATDnsMapEntry

h3cNATDnsMapEntry 1.3.6.1.4.1.2011.10.2.18.2.12.1
The entry of h3cNATDnsMapTable.
OBJECT-TYPE    
  H3cNATDnsMapEntry  

h3cNATDnsMapDomainName 1.3.6.1.4.1.2011.10.2.18.2.12.1.1
Domain name.
OBJECT-TYPE    
  DisplayString  

h3cNATDnsMapGlobalIp 1.3.6.1.4.1.2011.10.2.18.2.12.1.2
Global IP address.
OBJECT-TYPE    
  IpAddress  

h3cNATDnsMapGlobalPort 1.3.6.1.4.1.2011.10.2.18.2.12.1.3
Global port number.
OBJECT-TYPE    
  Integer32 1..65535  

h3cNATDnsMapProtocolType 1.3.6.1.4.1.2011.10.2.18.2.12.1.4
TCP Transmission Control Protocol. UDP User Datagram Protocol.
OBJECT-TYPE    
  INTEGER any(0), typeTCP(1), typeUDP(2)  

h3cNATDnsMapLastUseTime 1.3.6.1.4.1.2011.10.2.18.2.12.1.5
Its value is the time that the device uses from startup to last use 'Dns Map'record. If the value is 0,the device never use this record.
OBJECT-TYPE    
  TimeTicks  

h3cNATDnsMapRowStatus 1.3.6.1.4.1.2011.10.2.18.2.12.1.6
Only support 'destroy' and 'createAndGo'. If h3cNATDnsMapDomainName, h3cNATDnsMapGlobalIp and h3cNATDnsMapGlobalPortor h3cNATDnsMapDomainName, h3cNATDnsMapGlobalIp, h3cNATDnsMapGlobalPort and h3cNATDnsMapProtocolType were provided correctly, its value is changed 'active'.
OBJECT-TYPE    
  RowStatus