H3C-IF-EXT-MIB
File:
H3C-IF-EXT-MIB.mib (24757 bytes)
Imported modules
Imported symbols
Defined Types
H3cIfStatEntry |
|
SEQUENCE |
|
|
|
|
h3cIfStatFlowInterval |
Integer32 |
|
|
h3cIfStatFlowInBits |
Unsigned32 |
|
|
h3cIfStatFlowOutBits |
Unsigned32 |
|
|
h3cIfStatFlowInPkts |
Unsigned32 |
|
|
h3cIfStatFlowOutPkts |
Unsigned32 |
|
|
h3cIfStatFlowInBytes |
Unsigned32 |
|
|
h3cIfStatFlowOutBytes |
Unsigned32 |
|
H3cIfSpeedStatEntry |
|
SEQUENCE |
|
|
|
|
h3cIfSpeedStatInterval |
Integer32 |
|
|
h3cIfSpeedStatInPkts |
Unsigned32 |
|
|
h3cIfSpeedStatOutPkts |
Unsigned32 |
|
|
h3cIfSpeedStatInBytes |
Unsigned32 |
|
|
h3cIfSpeedStatOutBytes |
Unsigned32 |
|
H3cIfHCFlowStatEntry |
|
SEQUENCE |
|
|
|
|
h3cIfStatFlowHCInBits |
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCOutBits |
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCInPkts |
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCOutPkts |
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCInBytes |
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCOutBytes |
CounterBasedGauge64 |
|
H3cRTParentIfEntry |
|
SEQUENCE |
|
|
|
|
h3cRTParentIfIndex |
Integer32 |
|
|
h3cRTMinSubIfOrdinal |
Integer32 |
|
|
h3cRTMaxSubIfOrdinal |
Integer32 |
|
H3cRTSubIfEntry |
|
SEQUENCE |
|
|
|
|
h3cRTSubIfParentIfIndex |
Integer32 |
|
|
h3cRTSubIfOrdinal |
Integer32 |
|
|
h3cRTSubIfSubIfIndex |
Integer32 |
|
|
h3cRTSubIfSubIfDesc |
DisplayString |
|
|
h3cRTSubIfRowStatus |
RowStatus |
|
H3cIfLinkModeEntry |
|
SEQUENCE |
|
|
|
|
h3cIfLinkModeIndex |
Integer32 |
|
|
h3cIfLinkMode |
INTEGER |
|
|
h3cIfLinkModeSwitchSupport |
TruthValue |
|
H3cIfEntry |
|
SEQUENCE |
|
|
|
|
h3cIfUpDownTimes |
Integer32 |
|
|
h3cIfMtu |
Integer32 |
|
|
h3cIfBandwidthRate |
Integer32 |
|
|
h3cIfDiscardPktRate |
Integer32 |
|
|
h3cIfStatusKeepTime |
TimeTicks |
|
|
h3cIfInNUcastPkts |
Counter64 |
|
|
h3cIfOutNUcastPkts |
Counter64 |
|
|
h3cIfIsPoe |
TruthValue |
|
H3cIfExtTrapCfgEntry |
|
SEQUENCE |
|
|
|
|
h3cIfBandwidthUpperLimit |
Integer32 |
|
|
h3cIfDiscardPktRateUpperLimit |
Integer32 |
|
Defined Values
h3cIfExt |
1.3.6.1.4.1.2011.10.2.40 |
This MIB is an extension of interface MIBs such as IF-MIB.
This MIB is applicable to routers, switches and other products.
Some objects in this may be used only for some specific products,
so users should refer to the related documents to acquire more
detail information.
|
MODULE-IDENTITY |
|
|
|
h3cIfStatGlobalFlowInterval |
1.3.6.1.4.1.2011.10.2.40.1.1 |
Sampling interval for in/out flow of all interfaces.
Setting zero indicates closing the statistic function. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cIfStat |
1.3.6.1.4.1.2011.10.2.40.2.1 |
OBJECT IDENTIFIER |
|
|
|
h3cIfFlowStatTable |
1.3.6.1.4.1.2011.10.2.40.2.1.2.1 |
This table contains objects to get statistic information
of interfaces on a device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cIfStatEntry |
|
h3cIfStatEntry |
1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1 |
Entry items |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cIfStatEntry |
|
|
h3cIfStatFlowInterval |
1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.1 |
Sampling interval for in/out flow of interface.
Setting zero indicates closing this statistic function
and objects in this table should return 0. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cIfStatFlowInBits |
1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.2 |
In bits in the specific interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cIfStatFlowInPkts |
1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.4 |
In Packets in the specific interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cIfStatFlowOutPkts |
1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.5 |
Out packets in the specific interval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cIfSpeedStatTable |
1.3.6.1.4.1.2011.10.2.40.2.1.2.2 |
This table contains objects to get average speed information
in the specific interval of interfaces on a device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cIfSpeedStatEntry |
|
h3cIfSpeedStatEntry |
1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1 |
Entry items |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cIfSpeedStatEntry |
|
|
h3cIfSpeedStatInterval |
1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.1 |
Sampling interval for in/out flow of interface.
Setting zero indicates closing this statistic function
and objects in this table should return 0. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cIfSpeedStatInPkts |
1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.2 |
Average of input packets per second in the specific interval by
h3cIfSpeedStatInterval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cIfSpeedStatOutPkts |
1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.3 |
Average of output packets per second in the specific interval by
h3cIfSpeedStatInterval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cIfSpeedStatInBytes |
1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.4 |
Average of input bytes per second in the specific interval by
h3cIfSpeedStatInterval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cIfSpeedStatOutBytes |
1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.5 |
Average of output bytes per second in the specific interval by
h3cIfSpeedStatInterval. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
h3cIfHCFlowStatTable |
1.3.6.1.4.1.2011.10.2.40.2.1.2.3 |
This table contains objects to get statistic information
of interfaces on a device. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cIfHCFlowStatEntry |
|
h3cIfHCFlowStatEntry |
1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1 |
Entry items |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cIfHCFlowStatEntry |
|
|
h3cIfStatFlowHCInBits |
1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.1 |
In bits in the specific interval. This object is a 64-bit
version of h3cIfStatFlowInBits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCOutBits |
1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.2 |
Out bits in specific interval. This object is a 64-bit
version of h3cIfStatFlowOutBits. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCInPkts |
1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.3 |
In Packets in the specific interval. This object is a 64-bit
version of h3cIfStatFlowInPkts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCOutPkts |
1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.4 |
Out packets in the specific interval. This object is a 64-bit
version of h3cIfStatFlowOutPkts. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCInBytes |
1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.5 |
In bytes in the specific interval. This object is a 64-bit
version of h3cIfStatFlowInBytes. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
CounterBasedGauge64 |
|
|
h3cIfStatFlowHCOutBytes |
1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.6 |
Out bytes in the specific interval. This object is a 64-bit
version of h3cIfStatFlowOutBytes. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
CounterBasedGauge64 |
|
|
h3cRTParentIfTable |
1.3.6.1.4.1.2011.10.2.40.2.2.1 |
This table contains all interfaces that can create sub
interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRTParentIfEntry |
|
h3cRTParentIfEntry |
1.3.6.1.4.1.2011.10.2.40.2.2.1.1 |
This entry describes a interface that can create sub
interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRTParentIfEntry |
|
|
h3cRTParentIfIndex |
1.3.6.1.4.1.2011.10.2.40.2.2.1.1.1 |
The index of interface that can creat sub interface. The value
is the same as ifIndex value for this interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cRTMinSubIfOrdinal |
1.3.6.1.4.1.2011.10.2.40.2.2.1.1.2 |
The minimum ordinal of the sub interface can be created. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cRTMaxSubIfOrdinal |
1.3.6.1.4.1.2011.10.2.40.2.2.1.1.3 |
The max ordinal of the sub interface can be created. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cRTSubIfTable |
1.3.6.1.4.1.2011.10.2.40.2.2.2 |
This table contains objects to create or delete sub interfaces.
To create a sub interface, a valid parent interface must be
specified by h3cRTSubIfParentIfIndex and the h3cRTSubIfOrdinal
must be in the range between h3cRTMinSubIfOrdinal and
h3cRTMaxSubIfOrdinal of the parent interface from
h3cRTParentIfTable.
Sub interfaces are logical virtual interfaces configured on a
main interface. The main interface can be either a physical
interface (such as a Layer 3 Ethernet interface) or a logical
interface (such as an MFR interface). The subinterfaces on a
main interface share the physical layer parameters of the main
interface but can have link layer and network layer parameters
of their own. Disabling or enabling a subinterface does not
affect the main interface, but the main interface status change
affects the subinterfaces. The subinterfaces cannot operate
normally unless the main interface is connected.
A single physical interface containing multiple subinterfaces
enables you to network in a more flexible way.
You can create subinterfaces for the following physical
interfaces:
Ethernet interface. An Ethernet subinterface associated with no
VLAN supports only IPX, while an Ethernet subinterface associated
with a VLAN supports both IP and IPX.
WAN interfaces with their data link layer protocols being frame
relay, whose subinterfaces support IP and IPX.
WAN interfaces with their data link layer protocols being X.25,
whose subinterfaces support IP and IPX.
ATM interface, whose subinterfaces support only IP. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cRTSubIfEntry |
|
h3cRTSubIfEntry |
1.3.6.1.4.1.2011.10.2.40.2.2.2.1 |
The h3cRTSubIfTable entry items |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cRTSubIfEntry |
|
|
h3cRTSubIfParentIfIndex |
1.3.6.1.4.1.2011.10.2.40.2.2.2.1.1 |
The parent interface index. The value should be the same as the
h3cRTParentIfIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cRTSubIfOrdinal |
1.3.6.1.4.1.2011.10.2.40.2.2.2.1.2 |
The ordinal of sub interface. It should between
h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent
interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cRTSubIfSubIfIndex |
1.3.6.1.4.1.2011.10.2.40.2.2.2.1.3 |
The ifIndex value of the sub interface |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cIfLinkModeTable |
1.3.6.1.4.1.2011.10.2.40.2.2.3 |
This table contains objects to get or set the link mode of an
interface.
According to the layer at which the device processes received
data packets, Ethernet interfaces can operate in bridge or route
mode. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cIfLinkModeEntry |
|
h3cIfLinkModeEntry |
1.3.6.1.4.1.2011.10.2.40.2.2.3.1 |
The interface link mode table entry |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cIfLinkModeEntry |
|
|
h3cIfLinkModeIndex |
1.3.6.1.4.1.2011.10.2.40.2.2.3.1.1 |
The value is same as ifIndex. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cIfLinkMode |
1.3.6.1.4.1.2011.10.2.40.2.2.3.1.2 |
The current link mode of the interface
If h3cIfLinkModeSwitchSupport is true, writing to the object can
change the link mode of the interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
bridgeMode(1), routeMode(2) |
|
h3cIfLinkModeSwitchSupport |
1.3.6.1.4.1.2011.10.2.40.2.2.3.1.3 |
Whether the interface supports link mode switching.
If this object is true, the interface can operate in either
bridge mode or route mode. Otherwise the interfaces can operate
only in bridge or route mode. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cIfPhysicalNumber |
1.3.6.1.4.1.2011.10.2.40.2.3.1 |
Represents the number of physical interfaces in the device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cIfTable |
1.3.6.1.4.1.2011.10.2.40.2.3.2 |
A list of interface entries. The number of entries is given by
the value of IfNumber. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cIfEntry |
|
h3cIfEntry |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1 |
An entry containing management information applicable to a
particular interface. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cIfEntry |
|
|
h3cIfUpDownTimes |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1.1 |
The interface's up/down times, since the device was initialized. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cIfMtu |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1.2 |
The size of the largest datagram which can be sent/received on the
interface, specified in octets. For interfaces that are used for
transmitting network datagram, this is the size of the largest network
datagram that can be sent on the interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cIfBandwidthRate |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1.3 |
The rate of the bandwidth for an interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
h3cIfDiscardPktRate |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1.4 |
The rate of the discarded packets for an interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
h3cIfStatusKeepTime |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1.5 |
The time since the interface
entered its current operational state. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
h3cIfInNUcastPkts |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1.6 |
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cIfOutNUcastPkts |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1.7 |
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
h3cIfIsPoe |
1.3.6.1.4.1.2011.10.2.40.2.3.2.1.8 |
Whether the interface supports poe. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
h3cIfBandwidthUsageHigh |
1.3.6.1.4.1.2011.10.2.40.3.0.1 |
The notification is generated when the rate of the bandwidth for the
interface exceeds the upper limit. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
h3cIfDiscardPktRateHigh |
1.3.6.1.4.1.2011.10.2.40.3.0.2 |
The notification is generated when the rate of the discarded packets
for the interface exceeds the upper limit. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
h3cIfExtTrapCfgEntry |
1.3.6.1.4.1.2011.10.2.40.3.1.1.1 |
An entry for this table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cIfExtTrapCfgEntry |
|
|
h3cIfBandwidthUpperLimit |
1.3.6.1.4.1.2011.10.2.40.3.1.1.1.1 |
The rate of the bandwidth upper limit for an interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..100 |
|
h3cIfDiscardPktRateUpperLimit |
1.3.6.1.4.1.2011.10.2.40.3.1.1.1.2 |
The rate of the discarded packets upper limit for an interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..100 |
|