H3C-HPEOC-MIB

File: H3C-HPEOC-MIB.mib (15027 bytes)

Imported modules

HUAWEI-3COM-OID-MIB IF-MIB SNMPv2-SMI
SNMPv2-TC

Imported symbols

h3cCommon ifIndex Integer32
Unsigned32 Counter64 OBJECT-TYPE
MODULE-IDENTITY IpAddress DisplayString
TruthValue MacAddress

Defined Types

H3cHPEOCCltVlanManEntry  
SEQUENCE    
  h3cHPEOCCltEthPortType INTEGER

H3cHPEOCCltSysManEntry  
SEQUENCE    
  h3cHPEOCCltDescr DisplayString
  h3cHPEOCCltFwVersion DisplayString

H3cHPEOCCnuSysManEntry  
SEQUENCE    
  h3cHPEOCCnuBcastControl TruthValue
  h3cHPEOCCnuAnonymStatus TruthValue
  h3cHPEOCCnuMacLimit Unsigned32

H3cHPEOCCableInfoEntry  
SEQUENCE    
  h3cHPEOCFECErrors Counter64
  h3cHPEOCAvgBitsPerCarrier Unsigned32
  h3cHPEOCAvgSNRPerCarrier Integer32
  h3cHPEOCAvgInPBCRCErrors Unsigned32
  h3cHPEOCInTotalPkts Counter64
  h3cHPEOCAvgOutPower Integer32
  h3cHPEOCAvgOutPBCRCErrors Unsigned32
  h3cHPEOCOutTotalPkts Counter64

H3cHPEOCBitPerSymbolEntry  
SEQUENCE    
  h3cHPEOCBitPerSymbolIndex Unsigned32
  h3cHPEOCBitPerSymbol OCTET STRING

Defined Values

h3cHPEOC 1.3.6.1.4.1.2011.10.2.84
The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.
MODULE-IDENTITY    

h3cHPEOCSystem 1.3.6.1.4.1.2011.10.2.84.1
OBJECT IDENTIFIER    

h3cHPEOCCltVlanType 1.3.6.1.4.1.2011.10.2.84.1.1
Control EOC CLT's VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ieee8021q(1), portbased(2)  

h3cHPEOCCltVlanManTable 1.3.6.1.4.1.2011.10.2.84.1.2
This table implements the management of CLT(Coax Line Terminal) VLAN.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cHPEOCCltVlanManEntry

h3cHPEOCCltVlanManEntry 1.3.6.1.4.1.2011.10.2.84.1.2.1
The entry of the table h3cHPEOCCltVlanManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cHPEOCCltVlanManEntry  

h3cHPEOCCltEthPortType 1.3.6.1.4.1.2011.10.2.84.1.2.1.1
Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), debug(2)  

h3cHPEOCCltSysManTable 1.3.6.1.4.1.2011.10.2.84.1.3
This table implements the management of CLT(Coax Line Terminal).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cHPEOCCltSysManEntry

h3cHPEOCCltSysManEntry 1.3.6.1.4.1.2011.10.2.84.1.3.1
The entry of the table h3cHPEOCCltSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cHPEOCCltSysManEntry  

h3cHPEOCCltDescr 1.3.6.1.4.1.2011.10.2.84.1.3.1.1
Set the description of CLT.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..126)  

h3cHPEOCCltFwVersion 1.3.6.1.4.1.2011.10.2.84.1.3.1.2
EOC firmware version. If the object length is zero, it means the version is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

h3cHPEOCCnuSysManTable 1.3.6.1.4.1.2011.10.2.84.1.4
This table implements the management of CNUs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cHPEOCCnuSysManEntry

h3cHPEOCCnuSysManEntry 1.3.6.1.4.1.2011.10.2.84.1.4.1
The entry of the table h3cHPEOCCnuSysManTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cHPEOCCnuSysManEntry  

h3cHPEOCCnuBcastControl 1.3.6.1.4.1.2011.10.2.84.1.4.1.1
Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cHPEOCCnuAnonymStatus 1.3.6.1.4.1.2011.10.2.84.1.4.1.2
Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

h3cHPEOCCnuMacLimit 1.3.6.1.4.1.2011.10.2.84.1.4.1.3
Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

h3cHPEOCCltAutoUpgrade 1.3.6.1.4.1.2011.10.2.84.1.5
Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cHPEOCOnLineCnuNumber 1.3.6.1.4.1.2011.10.2.84.1.6
The total number of the online CNU(s).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cHPEOCCpuMacAddress 1.3.6.1.4.1.2011.10.2.84.1.7
EOC CPU's MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

h3cHPEOCOffLineCnuNumber 1.3.6.1.4.1.2011.10.2.84.1.8
The total number of the offline CNU(s).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cHPEOCDownLoadCNUFWResult 1.3.6.1.4.1.2011.10.2.84.1.9
Download CNU firmware result.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

h3cHPEOCCltAutoUpgradeType 1.3.6.1.4.1.2011.10.2.84.1.10
Type of auto upgrade status. It depends on h3cHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - First download the firmware from FTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. tftp - First download the firmware from TFTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flash(1), ftp(2), tftp(3)  

h3cHPEOCAutoUpObjects 1.3.6.1.4.1.2011.10.2.84.1.11
OBJECT IDENTIFIER    

h3cHPEOCServerAddress 1.3.6.1.4.1.2011.10.2.84.1.11.1
The address of remote host acting as server for operation. The default value is 0.0.0.0
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

h3cHPEOCServerUser 1.3.6.1.4.1.2011.10.2.84.1.11.2
When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

h3cHPEOCServerPassword 1.3.6.1.4.1.2011.10.2.84.1.11.3
Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

h3cHPEOCCableInfo 1.3.6.1.4.1.2011.10.2.84.2
OBJECT IDENTIFIER    

h3cHPEOCCableInfoTable 1.3.6.1.4.1.2011.10.2.84.2.1
This table defines the primary parameters of the cable information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cHPEOCCableInfoEntry

h3cHPEOCCableInfoEntry 1.3.6.1.4.1.2011.10.2.84.2.1.1
The entry of the table h3cHPEOCCableInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cHPEOCCableInfoEntry  

h3cHPEOCFECErrors 1.3.6.1.4.1.2011.10.2.84.2.1.1.1
The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will announce the sender to resend.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

h3cHPEOCAvgBitsPerCarrier 1.3.6.1.4.1.2011.10.2.84.2.1.1.2
The cable port's average bits per carrier.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cHPEOCAvgSNRPerCarrier 1.3.6.1.4.1.2011.10.2.84.2.1.1.3
The cable port's signal noise ratio(SNR) bits per carrier.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cHPEOCAvgInPBCRCErrors 1.3.6.1.4.1.2011.10.2.84.2.1.1.4
The input PB CRC errors on average.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cHPEOCInTotalPkts 1.3.6.1.4.1.2011.10.2.84.2.1.1.5
The total number of packets(including bad packets) received on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

h3cHPEOCAvgOutPower 1.3.6.1.4.1.2011.10.2.84.2.1.1.6
The cable port's power sent on average, the unit is db.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cHPEOCAvgOutPBCRCErrors 1.3.6.1.4.1.2011.10.2.84.2.1.1.7
The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

h3cHPEOCOutTotalPkts 1.3.6.1.4.1.2011.10.2.84.2.1.1.8
The total count of the packets(including bad packets) sent on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

h3cHPEOCBitPerSymbolTable 1.3.6.1.4.1.2011.10.2.84.2.2
This table defines the bits per symbol parameters of the cable line.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cHPEOCBitPerSymbolEntry

h3cHPEOCBitPerSymbolEntry 1.3.6.1.4.1.2011.10.2.84.2.2.1
The entry of the table h3cHPEOCBitPerSymbolTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cHPEOCBitPerSymbolEntry  

h3cHPEOCBitPerSymbolIndex 1.3.6.1.4.1.2011.10.2.84.2.2.1.1
The index of the h3cHPEOCBitPerSymbolTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

h3cHPEOCBitPerSymbol 1.3.6.1.4.1.2011.10.2.84.2.2.1.2
h3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING