H3C-EOC-COMMON-MIB
File:
H3C-EOC-COMMON-MIB.mib (54121 bytes)
Imported modules
Imported symbols
Defined Types
| H3cEOCCommonCltManEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCCommonCltAutoAuthorize |
TruthValue |
|
| |
h3cEOCCommonCltMaxAllowToAccess |
Integer32 |
|
| H3cEOCComCnuSysManEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCComCnuCableIfindex |
Integer32 |
|
| |
h3cEOCComCnuDeviceType |
DisplayString |
|
| |
h3cEOCComCnuDeviceAlias |
DisplayString |
|
| |
h3cEOCComCnuDescr |
DisplayString |
|
| |
h3cEOCComCnuUpTime |
TimeTicks |
|
| |
h3cEOCComCnuVLANType |
INTEGER |
|
| |
h3cEOCComCnuPvid |
Integer32 |
|
| |
h3cEOCComCnuVlanTag |
INTEGER |
|
| |
h3cEOCComCnuReset |
INTEGER |
|
| |
h3cEOCComCnuDeregister |
INTEGER |
|
| |
h3cEOCComCnuSave |
INTEGER |
|
| |
h3cEOCComCnuAccess |
INTEGER |
|
| H3cEOCComCnuMacEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCComCnuMacAddress |
MacAddress |
|
| |
h3cEOCComCnuRowStatus |
RowStatus |
|
| H3cEOCComCnuInfoEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCComCnuHardwareVersion |
DisplayString |
|
| |
h3cEOCComCnuPCBVersion |
OCTET STRING |
|
| |
h3cEOCComCnuLinkState |
INTEGER |
|
| |
h3cEOCComCnuAttenuation |
Integer32 |
|
| |
h3cEOCComCnuSoftwareVersion |
DisplayString |
|
| |
h3cEOCComCnuTxRate |
Integer32 |
|
| |
h3cEOCComCnuRxRate |
Integer32 |
|
| |
h3cEOCComCnuTxRateDrop |
Integer32 |
|
| |
h3cEOCComCnuRxRateDrop |
Integer32 |
|
| H3cEOCComCnuBandWidthEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCComCnuMaxDownBW |
Integer32 |
|
| |
h3cEOCComCnuSlaHighPriBW |
Integer32 |
|
| |
h3cEOCComCnuMaxUpBW |
Integer32 |
|
| H3cEOCComUniManEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCUniIndex |
Unsigned32 |
|
| |
h3cEOCComUniDescr |
DisplayString |
|
| |
h3cEOCComUniStatus |
INTEGER |
|
| |
h3cEOCComUniSpeed |
INTEGER |
|
| |
h3cEOCComUniDuplex |
INTEGER |
|
| |
h3cEOCComUniCurrentSpeed |
Gauge32 |
|
| |
h3cEOCComUniCurrentDuplex |
INTEGER |
|
| |
h3cEOCComUniMdi |
INTEGER |
|
| |
h3cEOCComUniFlowControl |
TruthValue |
|
| |
h3cEOCComUniCountReset |
INTEGER |
|
| |
h3cEOCComUniAlias |
DisplayString |
|
| |
h3cEOCComUniType |
IANAifType |
|
| |
h3cEOCComUniVLANType |
INTEGER |
|
| |
h3cEOCComUniPvid |
Integer32 |
|
| |
h3cEOCComUniVlanTag |
INTEGER |
|
| |
h3cEOCComUniPriority |
Integer32 |
|
| |
h3cEOCComUniUpLineRate |
Unsigned32 |
|
| |
h3cEOCComUniDownLineRate |
Unsigned32 |
|
| |
h3cEOCComUniAdminStatus |
INTEGER |
|
| H3cEOCComUniCountEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCUniInPkts |
Unsigned32 |
|
| |
h3cEOCUniInUPkts |
Unsigned32 |
|
| |
h3cEOCUniInBPkts |
Unsigned32 |
|
| |
h3cEOCUniInMPkts |
Unsigned32 |
|
| |
h3cEOCUniInPausePkts |
Unsigned32 |
|
| |
h3cEOCUniInTotalErrors |
Unsigned32 |
|
| |
h3cEOCUniInCRCErrs |
Unsigned32 |
|
| |
h3cEOCUniInUndersizePkts |
Unsigned32 |
|
| |
h3cEOCUniInOversizePkts |
Unsigned32 |
|
| |
h3cEOCUniInErrorbyOther |
Unsigned32 |
|
| |
h3cEOCUniInOctets |
Unsigned32 |
|
| |
h3cEOCUniOutPkts |
Unsigned32 |
|
| |
h3cEOCUniOutUPkts |
Unsigned32 |
|
| |
h3cEOCUniOutBPkts |
Unsigned32 |
|
| |
h3cEOCUniOutMPkts |
Unsigned32 |
|
| |
h3cEOCUniOutPausePkts |
Unsigned32 |
|
| |
h3cEOCUniOutTotalErrors |
Unsigned32 |
|
| |
h3cEOCUniOutCollisions |
Unsigned32 |
|
| |
h3cEOCUniOutDelayExceedDsds |
Unsigned32 |
|
| |
h3cEOCUniOutErrorbyOther |
Unsigned32 |
|
| |
h3cEOCUniOutDroppedFrames |
Unsigned32 |
|
| |
h3cEOCUniOutOctets |
Unsigned32 |
|
| H3cEOCComCnuTypeEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCComCnuTypeIdx |
Unsigned32 |
|
| |
h3cEOCComCnuDescripton |
DisplayString |
|
| H3cEOCComCnuNumEntry |
|
| SEQUENCE |
|
|
|
| |
h3cEOCComCnuNumber |
Integer32 |
|
Defined Values
| h3cEOCCommon |
1.3.6.1.4.1.2011.10.2.83 |
|
The objects in this MIB module are used to manage and
display common configuration between Ethernet Passive
Optical Network (EOC) port which are based on the Ethernet
in the First Mile (EFM) Passive Optical Network(PON) as
defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
and Ethernet Over Cable (EOC) which is based on HomePlug
AV Specification.
|
| MODULE-IDENTITY |
|
|
|
| h3cEOCCommonSysVersion |
1.3.6.1.4.1.2011.10.2.83.1.1.1 |
|
Eoc version. If the object length is
zero, it means the version is unknown.
The length is up to 1024.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| h3cEOCCommonCltManEntry |
1.3.6.1.4.1.2011.10.2.83.2.1.1 |
|
The entry of the table h3cEOCCommonCltManTable.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCCommonCltManEntry |
|
|
| h3cEOCCommonCltAutoAuthorize |
1.3.6.1.4.1.2011.10.2.83.2.1.1.1 |
|
This value determines whether software performs
self-authorization for each Cable Network Unit(CNU)
registering to the network. Setting it to false
means for every CNU registering, software requires
external authorization, and until it's done the
CNU is not authenticated. True value means software
authorizes each CNU registering to the network
automatically.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| h3cEOCCommonCltMaxAllowToAccess |
1.3.6.1.4.1.2011.10.2.83.2.1.1.2 |
|
This value determines how many CNU can be bound
in this CLT. If the number of CNU is more than this
value , then the rest of CNU should not be allow to
access.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuMaxDownBWMinVal |
1.3.6.1.4.1.2011.10.2.83.3.1.1 |
|
The lower limit of total-bandwidth which is confined to
h3cEOCComCnuMaxDownBW. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuMaxDownBWMaxVal |
1.3.6.1.4.1.2011.10.2.83.3.1.2 |
|
The upper limit of total-bandwidth which is confined to
h3cEOCComCnuMaxDownBW. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuSlaHighPriBWMinVal |
1.3.6.1.4.1.2011.10.2.83.3.1.3 |
|
The lower limit of high priority bandwidth which is confined to
h3cEOCComCnuSlaHighPriBW. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuSlaHighPriBWMaxVal |
1.3.6.1.4.1.2011.10.2.83.3.1.4 |
|
The upper limit of high priority bandwidth which is confined to
h3cEOCComCnuSlaHighPriBW. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuMaxUpBWMinVal |
1.3.6.1.4.1.2011.10.2.83.3.1.5 |
|
The lower limit of total-bandwidth which is confined to
h3cEOCComCnuMaxUpBW. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuMaxUpBWMaxVal |
1.3.6.1.4.1.2011.10.2.83.3.1.6 |
|
The upper limit of total-bandwidth which is confined to
h3cEOCComCnuMaxUpBW. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuAttenThrA |
1.3.6.1.4.1.2011.10.2.83.3.1.7 |
|
The value of cnu's average attenuation good level thresholds.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuAttenThrB |
1.3.6.1.4.1.2011.10.2.83.3.1.8 |
|
The value of cnu's average attenuation normal level thresholds.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuSysManEntry |
1.3.6.1.4.1.2011.10.2.83.3.2.1 |
|
The entry of the table h3cEOCComCnuSysManTable.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCComCnuSysManEntry |
|
|
| h3cEOCComCnuCableIfindex |
1.3.6.1.4.1.2011.10.2.83.3.2.1.1 |
|
The index of cable port which uniquely identifies the cable
port of one device.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuDeviceAlias |
1.3.6.1.4.1.2011.10.2.83.3.2.1.3 |
|
EOC CNU's alias which display as the device's name,
it's recommended to set it uniquely and understandably.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| h3cEOCComCnuDescr |
1.3.6.1.4.1.2011.10.2.83.3.2.1.4 |
|
User's description, including user's address,
name, telephone number and so on.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| h3cEOCComCnuUpTime |
1.3.6.1.4.1.2011.10.2.83.3.2.1.5 |
|
The time since the CNU last registered to the network.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeTicks |
|
|
| h3cEOCComCnuVLANType |
1.3.6.1.4.1.2011.10.2.83.3.2.1.6 |
| port vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
vLANTrunk(1), access(2), hybrid(3), fabric(4) |
|
| h3cEOCComCnuPvid |
1.3.6.1.4.1.2011.10.2.83.3.2.1.7 |
|
The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on cable interface.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..4094 |
|
| h3cEOCComCnuVlanTag |
1.3.6.1.4.1.2011.10.2.83.3.2.1.8 |
|
VLAN is set tagged or untagged on cable interface.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
tagged(1), untagged(2) |
|
| h3cEOCComCnuReset |
1.3.6.1.4.1.2011.10.2.83.3.2.1.9 |
|
This variable is used to reset the CNU device. The
interface may be unavailable while the reset occurs and
data may be lost. During reading operation it returns
the state of the CNU device. running(1) indicates and
operates normal operation, reset(2) indicates and
operates reset mode. Writing can be done all the time.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
running(1), reset(2) |
|
| h3cEOCComCnuDeregister |
1.3.6.1.4.1.2011.10.2.83.3.2.1.10 |
|
deregister CNU.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
deregister(1) |
|
| h3cEOCComCnuSave |
1.3.6.1.4.1.2011.10.2.83.3.2.1.11 |
|
Save the UNI and CNU related configurations to
the CNU.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
save(1), running(2) |
|
| h3cEOCComCnuAccess |
1.3.6.1.4.1.2011.10.2.83.3.2.1.12 |
|
Control whether the user can access to the network.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
access(1), notaccess(2) |
|
| h3cEOCComCnuMacEntry |
1.3.6.1.4.1.2011.10.2.83.3.3.1 |
|
The entry of the table h3cEOCComCnuMacTable.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCComCnuMacEntry |
|
|
| h3cEOCComCnuInfoTable |
1.3.6.1.4.1.2011.10.2.83.3.4 |
|
Primary status of the specified CNU.
There will be one row in this table for each
information in the system.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
H3cEOCComCnuInfoEntry |
|
| h3cEOCComCnuInfoEntry |
1.3.6.1.4.1.2011.10.2.83.3.4.1 |
|
The entry of the h3cEOCComCnuInfoTable.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCComCnuInfoEntry |
|
|
| h3cEOCComCnuHardwareVersion |
1.3.6.1.4.1.2011.10.2.83.3.4.1.1 |
|
EOC CNU's hardware version. If the object length is
zero, it means the version is unknown.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| h3cEOCComCnuPCBVersion |
1.3.6.1.4.1.2011.10.2.83.3.4.1.2 |
|
EOC CNU's PCB version.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..255) |
|
| h3cEOCComCnuLinkState |
1.3.6.1.4.1.2011.10.2.83.3.4.1.3 |
|
The cable port's link state. The physicaldown(1) state indicates
that the CNU is not powered on. The linkdown(2) state indicates
that the CNU is powered on, but registers fail. The linkup(3)
state indicates that the CNU is powered on, and registers
successful.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
physicaldown(1), linkdown(2), linkup(3) |
|
| h3cEOCComCnuSoftwareVersion |
1.3.6.1.4.1.2011.10.2.83.3.4.1.5 |
|
EOC CNU's software version. If the object length is
zero, it means the version is unknown.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| h3cEOCComCnuTxRate |
1.3.6.1.4.1.2011.10.2.83.3.4.1.6 |
|
The cnu's capability of tx speed in unit of 1Mbps.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuRxRate |
1.3.6.1.4.1.2011.10.2.83.3.4.1.7 |
|
The cnu's capability of rx speed in unit of 1Mbps.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuTxRateDrop |
1.3.6.1.4.1.2011.10.2.83.3.4.1.8 |
|
The cnu's capability droping of tx
speed from it's history max value in unit of %.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuRxRateDrop |
1.3.6.1.4.1.2011.10.2.83.3.4.1.9 |
|
The cnu's capability droping of rx
speed from it's history max value in unit of %.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuBandWidthEntry |
1.3.6.1.4.1.2011.10.2.83.3.5.1 |
|
The entry of table h3cEOCComCnuBandWidthTable.
It is a pre-configuration.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCComCnuBandWidthEntry |
|
|
| h3cEOCComCnuMaxDownBW |
1.3.6.1.4.1.2011.10.2.83.3.5.1.1 |
|
Maximum bandwidth allowed for the CNU,
measured in Kbit/s.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuSlaHighPriBW |
1.3.6.1.4.1.2011.10.2.83.3.5.1.2 |
|
High priority bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of h3cEOCComCnuMaxUpBW.
The high priority bandwidth should not be larger than the maximum
bandwidth.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComCnuMaxUpBW |
1.3.6.1.4.1.2011.10.2.83.3.5.1.3 |
|
Total bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of h3cEOCComCnuSlaHighPriBW.
The total bandwidth should be larger than the high priority bandwidth.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| h3cEOCComUniManTable |
1.3.6.1.4.1.2011.10.2.83.4.1 |
|
This table defines several user network interface(UNI) system
parameters.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
H3cEOCComUniManEntry |
|
| h3cEOCComUniManEntry |
1.3.6.1.4.1.2011.10.2.83.4.1.1 |
|
The entry of h3cEOCComUniManTable.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCComUniManEntry |
|
|
| h3cEOCUniIndex |
1.3.6.1.4.1.2011.10.2.83.4.1.1.1 |
|
The index value which uniquely identifies the FE(Fast Ethernet)
interface of the CNU.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCComUniDescr |
1.3.6.1.4.1.2011.10.2.83.4.1.1.2 |
|
A textual string containing information about the interface. This
string should include the name of the manufacturer, the product
name and the version of the interface hardware and software.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| h3cEOCComUniStatus |
1.3.6.1.4.1.2011.10.2.83.4.1.1.3 |
|
The desired state of the user network interface. When a managed
system initializes, all user network interfaces start with down
state. The testing state indicates that no operational packets
can be passed. As a result of either explicit management action or
per configuration information retained by the managed system,
h3cEOCComUniStatus is then changed to either the up or
testing states (or remains in the down state).
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2), testing(3) |
|
| h3cEOCComUniSpeed |
1.3.6.1.4.1.2011.10.2.83.4.1.1.4 |
|
User network interface speed.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
auto(1), s10M(10), s100M(100) |
|
| h3cEOCComUniDuplex |
1.3.6.1.4.1.2011.10.2.83.4.1.1.5 |
|
User network interface mode.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
full(1), half(2), auto(3) |
|
| h3cEOCComUniCurrentSpeed |
1.3.6.1.4.1.2011.10.2.83.4.1.1.6 |
|
An estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. If the bandwidth of the interface is
greater than the maximum value reportable by this
object then this object should report its maximum
value (4,294,967,295). For a sub-layer which
has no concept of bandwidth, this object should be
zero.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Gauge32 |
|
|
| h3cEOCComUniCurrentDuplex |
1.3.6.1.4.1.2011.10.2.83.4.1.1.7 |
|
The current mode of operation of the MAC
entity. 'unknown' indicates that the current
duplex mode could not be determined.
Management control of the duplex mode is
accomplished through the MAU MIB. When
an interface does not support autonegotiation,
or when autonegotiation is not enabled, the
duplex mode is controlled using
ifMauDefaultType. When autonegotiation is
supported and enabled, duplex mode is controlled
using ifMauAutoNegAdvertisedBits. In either
case, the currently operating duplex mode is
reflected both in this object and in ifMauType.
Note that this object provides redundant
information with ifMauType. Normally, redundant
objects are discouraged. However, in this
instance, it allows a management application to
determine the duplex status of an interface
without having to know every possible value of
ifMauType. This was felt to be sufficiently
valuable to justify the redundancy.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
full(1), half(2), unknown(3) |
|
| h3cEOCComUniMdi |
1.3.6.1.4.1.2011.10.2.83.4.1.1.8 |
| Type of the line connected to UNI interface:
mdi-ii(straight-through cable),
mdi-x (crossover cable),
mdi-auto (auto-sensing). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
mdi-ii(1), mdi-x(2), mdi-auto(3) |
|
| h3cEOCComUniFlowControl |
1.3.6.1.4.1.2011.10.2.83.4.1.1.9 |
| Flow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| h3cEOCComUniCountReset |
1.3.6.1.4.1.2011.10.2.83.4.1.1.10 |
| Reset the counter which is about packets of the interface,
then the counter will change to zero. There is no sense in
reading this object. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
reset(1) |
|
| h3cEOCComUniAlias |
1.3.6.1.4.1.2011.10.2.83.4.1.1.11 |
|
This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-
volatile 'handle' for the interface.
On the first instantiation of an interface, the value
of h3cEOCComUniAlias associated with that interface is the
zero-length string. As and when a value is written
into an instance of h3cEOCComUniAlias through a network
management set operation, then the agent must retain
the supplied value in the h3cEOCComUniAlias instance associated
with the same interface for as long as that interface
remains instantiated, including across all re-
initializations/reboots of the network management
system, including those which result in a change of
the interface's ifIndex and h3cEOCUniIndex value.
An example of the value which a network manager might
store in this object for a WAN interface is the
(Telco's) circuit number/identifier of the interface.
Some agents may support write-access only for
interfaces having particular values of h3cEOCComUniType. An
agent which supports write access to this object is
required to keep the value in non-volatile storage,
but it may limit the length of new values depending on
how much storage is already occupied by the current
values for other interfaces.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
|
|
| h3cEOCComUniType |
1.3.6.1.4.1.2011.10.2.83.4.1.1.12 |
|
The type of interface. Additional values for h3cEOCComUniType
are assigned by the Internet Assigned Numbers
Authority(IANA), through updating the syntax of the
IANAifType textual convention.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
IANAifType |
|
|
| h3cEOCComUniVLANType |
1.3.6.1.4.1.2011.10.2.83.4.1.1.13 |
| port vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
vLANTrunk(1), access(2), hybrid(3), fabric(4) |
|
| h3cEOCComUniPvid |
1.3.6.1.4.1.2011.10.2.83.4.1.1.14 |
|
The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..4094 |
|
| h3cEOCComUniVlanTag |
1.3.6.1.4.1.2011.10.2.83.4.1.1.15 |
|
VLAN is set tagged or untagged.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
tagged(1), untagged(2) |
|
| h3cEOCComUniPriority |
1.3.6.1.4.1.2011.10.2.83.4.1.1.16 |
|
The default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..7 |
|
| h3cEOCComUniUpLineRate |
1.3.6.1.4.1.2011.10.2.83.4.1.1.17 |
|
The max speed upload in units of 1,000 bits per second
on this interface. The value should between 0 and 100Mbps.
If the value is 0, it means that the upload speed is only
restricted by the physical line.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCComUniDownLineRate |
1.3.6.1.4.1.2011.10.2.83.4.1.1.18 |
|
The max speed download in units of 1,000 bits per second
on this interface. The value should between 0 and 100Mbps.
If the value is 0, it means that the download speed is only
restricted by the physical line.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCComUniAdminStatus |
1.3.6.1.4.1.2011.10.2.83.4.1.1.19 |
|
Control if open or close the UNI. If choose up(1), means the UNI is
opened and packets can pass it. If choose down(2), means the UNI is
closed and all packets will be discard.
|
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
up(1), down(2) |
|
| h3cEOCComUniCountEntry |
1.3.6.1.4.1.2011.10.2.83.4.2.1 |
| An entry containing management information applicable
to a particular interface. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCComUniCountEntry |
|
|
| h3cEOCUniInPkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.1 |
| The total number of packets (including bad packets,
broadcast packets, and multicast packets) received. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInUPkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.2 |
| The total number of good packets received that are
directed to the unicast address. Note that this
does not include multicast and broadcast packets. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInBPkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.3 |
| The total number of good packets received that are
directed to the broadcast address. Note that this
does not include multicast packets. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInMPkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.4 |
| The total number of good packets received that are
directed to a multicast address. Note that this number
does not include packets directed to the broadcast address. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInPausePkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.5 |
| A count of MAC Control packets received on this
interface by the pause(flow control) operation.
This counter does not increment when the
interface is in a half-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInTotalErrors |
1.3.6.1.4.1.2011.10.2.83.4.2.1.6 |
| Total count of the error packets received on this interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInCRCErrs |
1.3.6.1.4.1.2011.10.2.83.4.2.1.7 |
| The total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInUndersizePkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.8 |
| The total number of packets received that are
less than 64 octets long (excluding framing bits,
but including FCS octets) and are otherwise well formed. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInOversizePkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.9 |
| The total number of packets received that are
longer than 1518 octets (excluding framing bits,
but including FCS octets) and are otherwise well formed. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInErrorbyOther |
1.3.6.1.4.1.2011.10.2.83.4.2.1.10 |
| The total number of other error packets received on this interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniInOctets |
1.3.6.1.4.1.2011.10.2.83.4.2.1.11 |
| The total number of octets received on this interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutPkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.12 |
| The total number of packets (including bad packets,
broadcast packets, and multicast packets) sent. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutUPkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.13 |
| The total number of good packets sent that are
directed to the unicast address. Note that this
does not include multicast and broadcast packets. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutBPkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.14 |
| The total number of good packets sent that are
directed to the broadcast address. Note that this
does not include multicast packets. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutMPkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.15 |
| The total number of good packets sent that are
directed to a multicast address. Note that this number
does not include packets directed to the broadcast address. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutPausePkts |
1.3.6.1.4.1.2011.10.2.83.4.2.1.16 |
| The total number of MAC control packets sent on this
interface by the pause operation. This counter does
not increment when the interface is in a half-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management system. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutTotalErrors |
1.3.6.1.4.1.2011.10.2.83.4.2.1.17 |
| The total number of error packets sent on this interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutCollisions |
1.3.6.1.4.1.2011.10.2.83.4.2.1.18 |
| The best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
could. Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions. Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutDelayExceedDsds |
1.3.6.1.4.1.2011.10.2.83.4.2.1.19 |
| The number of packets discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source route bridges. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutErrorbyOther |
1.3.6.1.4.1.2011.10.2.83.4.2.1.20 |
| The total number of other error packets sent on this interface.
Other error packets means the error packets out of collision packets
and excessive delayed packets. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutDroppedFrames |
1.3.6.1.4.1.2011.10.2.83.4.2.1.21 |
| The total number of frames dropped because of buffer failure. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCUniOutOctets |
1.3.6.1.4.1.2011.10.2.83.4.2.1.22 |
| The total number of octets transmitted out of the interface. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCCnuRegExcessTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.1 |
|
A h3cEOCCnuRegExcessTrap notification is sent when the
number of registered CNUs exceeds the limit.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuRegExcessRecoverTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.2 |
|
A h3cEOCCnuRegExcessRecoverTrap notification is sent when
h3cEOCCnuRegExcessTrap is detected and then recoverd.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuRegSuccTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.3 |
|
A h3cEOCCnuRegSuccTrap notification is sent when a
CNU registers successful.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuOffLineTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.4 |
|
A h3cEOCCnuOffLineTrap notification is sent when a
CNU offline.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuLinkupTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.5 |
|
A h3cEOCCnuLinkupTrap notification is sent when a
CNU linkup.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCOamDisconnectTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.6 |
|
A h3cEOCOamDisconnectionTrap notification is sent when
LLID's OAM link is disconnected.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCOamDisconnectRecoverTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.7 |
|
A h3cEOCOamDisconnectionRecoverTrap notification is sent when
LLID's OAM link is disconnected and then connected.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCBandwidthNotEnoughTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.8 |
|
Bandwidth is not enough, cnu can not bind now.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuAttenuationTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.9 |
|
A h3cHPEOCCnuAttenuationTrap notification is sent when a
CNU's attenuation is changing.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuRegFailTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.10 |
|
A h3cEOCCnuRegFailTrap notification is sent when a
CNU registers fail.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCLTCablePortErrorTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.11 |
|
A h3cEOCCLTCablePortErrorTrap notification is sent when the
hardware of cable port occurs error or CLT's vlan is configged
error.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCLTCablePortErrReTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.12 |
|
A h3cEOCCLTCablePortErrReTrap notification is sent when cable port
error and then recovered.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuTxRateDropTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.13 |
|
A h3cEOCCnuTxRateDropTrap notification is sent when cable port
rate of TX capability drop exceeded threshold.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuTxRateDropRecoverTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.14 |
|
A h3cEOCCnuTxRateDropRecoverTrap notification is sent when cable port
rate of TX capability recover from the recent rate-drop trap.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuRxRateDropTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.15 |
|
A h3cEOCCnuRxRateDropTrap notification is sent when cable port
rate of RX capability drop exceeded threshold.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuRxRateDropRecoverTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.16 |
|
A h3cEOCCnuRxRateDropRecoverTrap notification is sent when cable port
rate of RX capability recover from the recent rate-drop trap.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuFWDownLoadErrTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.17 |
|
A h3cEOCCnuFWDownLoadErrTrap notification is sent when CLT can't
download CNU firmware from the server successfully.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuFWDownLoadErrReTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.18 |
|
A h3cEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover
from the download CNU firmware error.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuDeviceTypeErrTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.19 |
|
A h3cEOCCnuDeviceTypeErrTrap notification is sent when the online CNU
doesn't match the type which user defined earlier.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuDeviceTypeErrReTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.20 |
|
A h3cEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU
doesn't match the type which user defined earlier and then recover.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuAutoUpdateErrTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.21 |
|
A h3cEOCCnuAutoUpdateErrTrap notification is sent when the online CNU
doesn't auto update successfully.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCCnuAutoUpdateSuccTrap |
1.3.6.1.4.1.2011.10.2.83.5.0.22 |
|
A h3cEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU
auto update successfully.
|
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| h3cEOCComCnuTypeEntry |
1.3.6.1.4.1.2011.10.2.83.6.1.1 |
|
The entry of the table h3cEOCComCnuTypeTable.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCComCnuTypeEntry |
|
|
| h3cEOCComCnuTypeIdx |
1.3.6.1.4.1.2011.10.2.83.6.1.1.1 |
|
A unique value for each cnu types. Its value
ranges between 1 and the value of cny typess.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| h3cEOCComCnuNumTable |
1.3.6.1.4.1.2011.10.2.83.6.2 |
|
This table defines the number of cnu registered in variable types
of the CLT .
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
H3cEOCComCnuNumEntry |
|
| h3cEOCComCnuNumEntry |
1.3.6.1.4.1.2011.10.2.83.6.2.1 |
|
The entry of the table h3cEOCComCnuNumTable.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
H3cEOCComCnuNumEntry |
|
|
| h3cEOCComCnuNumber |
1.3.6.1.4.1.2011.10.2.83.6.2.1.1 |
|
The number of special type of cnu that has been registerd in clt.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|