H3C-DOT11-RRM-MIB

File: H3C-DOT11-RRM-MIB.mib (40131 bytes)

Imported modules

H3C-DOT11-REF-MIB SNMPv2-SMI SNMPv2-TC

Imported symbols

H3cDot11RadioType H3cDot11ChannelScopeType H3cDot11RadioElementIndex
H3cDot11RadioScopeType h3cDot11APElementIndex Integer32
Unsigned32 OBJECT-TYPE MODULE-IDENTITY
NOTIFICATION-TYPE TruthValue MacAddress
DateAndTime RowStatus h3cDot11
H3cDot11ObjectIDType H3cDot11SSIDStringType

Defined Types

H3cDot11RRMRadioCfgEntry  
SEQUENCE    
  h3cDot11RRMRadioType H3cDot11RadioType
  h3cDot11RRMCfgChlState TruthValue
  h3cDot11RRMCfgChlMode INTEGER
  h3cDot11RRMChlProntoRadioElmt Unsigned32
  h3cDot11RRMCfgPwrState TruthValue
  h3cDot11RRMCfgPwrMode INTEGER
  h3cDot11RRMPwrProntoRadioElmt Unsigned32
  h3cDot11RRMCfgIntrvl Integer32
  h3cDot11RRMCfgIntrfThres Integer32
  h3cDot11RRMCfgNoiseThres Integer32
  h3cDot11RRMCfgPERThres Integer32
  h3cDot11RRMCfgToleranceFctr Integer32
  h3cDot11RRMCfgAdjacencyFctr Integer32

H3cDot11RRMAPCfgEntry  
SEQUENCE    
  h3cDot11RRMAPWorkMode INTEGER

H3cDot11RRMSDRadioGroupEntry  
SEQUENCE    
  h3cDot11RRMSDRadioGroupId Unsigned32
  h3cDot11RRMSDRadioGroupDesc OCTET STRING
  h3cDot11RRMSDRdGrpChlHolddownTm Unsigned32
  h3cDot11RRMSDRdGrpPwrHolddownTm Unsigned32
  h3cDot11RRMSDRdGroupRowStatus RowStatus

H3cDot11RRMAPCfg2Entry  
SEQUENCE    
  h3cDot11RRMAPSerialID H3cDot11ObjectIDType
  h3cDot11RRMAPIntfThreshold Integer32
  h3cDot11RRMStaIntfThreshold Integer32
  h3cDot11RRMCoChlIntfTrapThhd Integer32
  h3cDot11RRMAdjChlIntfTrapThhd Integer32

H3cDot11RRMChlRptEntry  
SEQUENCE    
  h3cDot11RRMRadioIndex H3cDot11RadioElementIndex
  h3cDot11RRMChlRptChlNum Integer32
  h3cDot11RRMChlRptChlType INTEGER
  h3cDot11RRMChlRptChlQlty INTEGER
  h3cDot11RRMChlRptNbrCnt Integer32
  h3cDot11RRMChlRptLoad Integer32
  h3cDot11RRMChlRptUtlz Integer32
  h3cDot11RRMChlRptIntrf Integer32
  h3cDot11RRMChlRptPER Integer32
  h3cDot11RRMChlRptRetryRate Integer32
  h3cDot11RRMChlRptNoise Integer32
  h3cDot11RRMChlRptRadarIndtcr INTEGER

H3cDot11RRMNbrInfoEntry  
SEQUENCE    
  h3cDot11RrmNbrBSSID MacAddress
  h3cDot11RrmNbrChl H3cDot11ChannelScopeType
  h3cDot11RRMNbrIntrf Integer32
  h3cDot11RrmNbrRSSI Integer32
  h3cDot11RrmNbrType INTEGER
  h3cDot11RrmNbrSSID H3cDot11SSIDStringType

H3cDot11RRMHistoryEntry  
SEQUENCE    
  h3cDot11RRMHistoryId Integer32
  h3cDot11RRMHistoryRecIndctr INTEGER
  h3cDot11RRMHistoryChl H3cDot11ChannelScopeType
  h3cDot11RRMHistoryPwr Integer32
  h3cDot11RRMHistoryLoad Integer32
  h3cDot11RRMHistoryUtlz Integer32
  h3cDot11RRMHistoryIntrf Integer32
  h3cDot11RRMHistoryNoise Integer32
  h3cDot11RRMHistoryPER Integer32
  h3cDot11RRMHistoryRetryRate Integer32
  h3cDot11RRMHistoryChgReason BITS
  h3cDot11RRMHistoryChgDateTime DateAndTime

H3cDot11MonitorDetectedDevEntry  
SEQUENCE    
  h3cDot11MonitorDevMAC MacAddress
  h3cDot11MonitorDevType INTEGER
  h3cDot11MonitorDevVendor OCTET STRING
  h3cDot11MonitorDevSSID OCTET STRING
  h3cDot11MonitorDevBSSID MacAddress
  h3cDot11MonitorDevChannel H3cDot11ChannelScopeType
  h3cDot11MonitorRadioId H3cDot11RadioScopeType
  h3cDot11MonitorDevMaxRSSI Integer32
  h3cDot11MonitorDevBeaconIntvl Integer32
  h3cDot11MonitorDevFstDctTime DateAndTime
  h3cDot11MonitorDevLstDctTime DateAndTime
  h3cDot11MonitorDevClear TruthValue
  h3cDot11MonitorDevSNR Integer32

Defined Values

h3cDot11RRM 1.3.6.1.4.1.2011.10.2.75.8
This MIB file is to provide the object definition of WLAN radio resource management (RRM).
MODULE-IDENTITY    

h3cDot11RRMConfigGroup 1.3.6.1.4.1.2011.10.2.75.8.1
OBJECT IDENTIFIER    

h3cDot11RRMGlobalCfgPara 1.3.6.1.4.1.2011.10.2.75.8.1.1
OBJECT IDENTIFIER    

h3cDot11RRM11nMadtMaxMcs 1.3.6.1.4.1.2011.10.2.75.8.1.1.1
Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..76 | 255  

h3cDot11RRM11nSuptMaxMcs 1.3.6.1.4.1.2011.10.2.75.8.1.1.2
Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..76  

h3cDot11RRM11gProtect 1.3.6.1.4.1.2011.10.2.75.8.1.1.3
Enable/Disable dot11g protection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RRM11aPwrConstrt 1.3.6.1.4.1.2011.10.2.75.8.1.1.4
Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER is defined by the regulatory domain).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cDot11RRM11aSpectrumManag 1.3.6.1.4.1.2011.10.2.75.8.1.1.5
Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints applicable to all devices in the BSS based on regulatory domain specification.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RRMAutoChlAvoid11h 1.3.6.1.4.1.2011.10.2.75.8.1.1.6
Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of them is selected.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RRMScanChl 1.3.6.1.4.1.2011.10.2.75.8.1.1.7
Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band are scanned.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), all(2)  

h3cDot11RRMScanRptIntvel 1.3.6.1.4.1.2011.10.2.75.8.1.1.8
Set the scan report interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..120  

h3cDot11APInterfNumThreshhd 1.3.6.1.4.1.2011.10.2.75.8.1.1.9
Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interference trap will be sent immediately.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cDot11StaInterfNumThreshhd 1.3.6.1.4.1.2011.10.2.75.8.1.1.10
Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA interference trap will be sent immediately.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cDot11RRMRadioCfgTable 1.3.6.1.4.1.2011.10.2.75.8.1.2
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11RRMRadioCfgEntry

h3cDot11RRMRadioCfgEntry 1.3.6.1.4.1.2011.10.2.75.8.1.2.1
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11RRMRadioCfgEntry  

h3cDot11RRMRadioType 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.1
802.11 radio type.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11RadioType  

h3cDot11RRMCfgChlState 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.2
Enable/Disable dynamic channel selection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RRMCfgChlMode 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.3
Configure the mode of channel selection. This node can be configured only when dynamic channel selection is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER selfDecisive(1), userTriggered(2)  

h3cDot11RRMChlProntoRadioElmt 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.4
Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

h3cDot11RRMCfgPwrState 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.5
Enable/Disable dynamic power selection for the band.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11RRMCfgPwrMode 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.6
Configure the mode of transmit power control. This node can be configured only when dynamic power selection is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER selfDecisive(1), userTriggered(2)  

h3cDot11RRMPwrProntoRadioElmt 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.7
Specify the AP and radio that will change power at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of transmit power control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

h3cDot11RRMCfgIntrvl 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.8
Configure the calibration interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cDot11RRMCfgIntrfThres 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.9
Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 40..100  

h3cDot11RRMCfgNoiseThres 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.10
Configure the noise threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -127..127  

h3cDot11RRMCfgPERThres 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.11
Configure the CRC error threshold. If the percentage of CRC errors reaches the threshold, RRM will perform resource adjustment to control the situation.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..100  

h3cDot11RRMCfgToleranceFctr 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.12
Configure the tolerance level. During dynamic frequency selection (DFS), the channel will be changed only if there is a better channel having lesser interference and packet error rate than those specified by the user.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 15..45  

h3cDot11RRMCfgAdjacencyFctr 1.3.6.1.4.1.2011.10.2.75.8.1.2.1.13
Configure the adjacency factor for the band. If transmit power control (TPC) is configured, power will be adjusted when the nth neighbor is detected. The value n is the adjacency factor.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16  

h3cDot11RRMAPCfgTable 1.3.6.1.4.1.2011.10.2.75.8.1.3
This table defines the RRM parameters for AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11RRMAPCfgEntry

h3cDot11RRMAPCfgEntry 1.3.6.1.4.1.2011.10.2.75.8.1.3.1
Each entry contains information of RRM parameters for AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11RRMAPCfgEntry  

h3cDot11RRMAPWorkMode 1.3.6.1.4.1.2011.10.2.75.8.1.3.1.1
AP work mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), monitor(2), hybrid(3)  

h3cDot11RRMSDRadioGroupTable 1.3.6.1.4.1.2011.10.2.75.8.1.4
This table defines RRM self-decisive radio group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11RRMSDRadioGroupEntry

h3cDot11RRMSDRadioGroupEntry 1.3.6.1.4.1.2011.10.2.75.8.1.4.1
Each entry contains information of one RRM self-decisive radio group.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11RRMSDRadioGroupEntry  

h3cDot11RRMSDRadioGroupId 1.3.6.1.4.1.2011.10.2.75.8.1.4.1.1
Represents RRM self-decisive radio group ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

h3cDot11RRMSDRadioGroupDesc 1.3.6.1.4.1.2011.10.2.75.8.1.4.1.2
Represents the description of RRM self-decisive radio group.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

h3cDot11RRMSDRdGrpChlHolddownTm 1.3.6.1.4.1.2011.10.2.75.8.1.4.1.3
Represents the channel holddown time of RRM self-decisive radio group.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cDot11RRMSDRdGrpPwrHolddownTm 1.3.6.1.4.1.2011.10.2.75.8.1.4.1.4
Represents the power holddown time of RRM self-decisive radio group.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

h3cDot11RRMSDRdGroupRowStatus 1.3.6.1.4.1.2011.10.2.75.8.1.4.1.5
The row status of this table entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

h3cDot11RRMAPCfg2Table 1.3.6.1.4.1.2011.10.2.75.8.1.5
This table defines the RRM parameters for AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11RRMAPCfg2Entry

h3cDot11RRMAPCfg2Entry 1.3.6.1.4.1.2011.10.2.75.8.1.5.1
Each entry contains information of RRM parameters for AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11RRMAPCfg2Entry  

h3cDot11RRMAPSerialID 1.3.6.1.4.1.2011.10.2.75.8.1.5.1.1
Serial ID of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11ObjectIDType  

h3cDot11RRMAPIntfThreshold 1.3.6.1.4.1.2011.10.2.75.8.1.5.1.2
Represents threshold of AP interference . If the number of AP interference exceeds this threshold, AP interference trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cDot11RRMStaIntfThreshold 1.3.6.1.4.1.2011.10.2.75.8.1.5.1.3
Represents threshold of STA interference. If the number of STA interference exceeds this threshold, station interference trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cDot11RRMCoChlIntfTrapThhd 1.3.6.1.4.1.2011.10.2.75.8.1.5.1.4
Represents threshold of interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cDot11RRMAdjChlIntfTrapThhd 1.3.6.1.4.1.2011.10.2.75.8.1.5.1.5
Represents threshold of adjacent interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cDot11RRMDetectGroup 1.3.6.1.4.1.2011.10.2.75.8.2
OBJECT IDENTIFIER    

h3cDot11RRMChlRptTable 1.3.6.1.4.1.2011.10.2.75.8.2.1
This table shows the RRM channel information of each radio on all APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11RRMChlRptEntry

h3cDot11RRMChlRptEntry 1.3.6.1.4.1.2011.10.2.75.8.2.1.1
Each entry contains information of RRM channel information of the radio on the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11RRMChlRptEntry  

h3cDot11RRMRadioIndex 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.1
Represents index of the radio.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  H3cDot11RadioElementIndex  

h3cDot11RRMChlRptChlNum 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.2
Channel number.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

h3cDot11RRMChlRptChlType 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.3
Channel type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER primeChannel(1), offChannel(2)  

h3cDot11RRMChlRptChlQlty 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.4
Channel quality.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(1), bad(2)  

h3cDot11RRMChlRptNbrCnt 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.5
Number of neighbors found on the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RRMChlRptLoad 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.6
Load observed on the channel in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMChlRptUtlz 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.7
Utilization of the channel in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMChlRptIntrf 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.8
Interference observed on the channel in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMChlRptPER 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.9
Packet error rate observed on the channel in percentage.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMChlRptRetryRate 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.10
Percentage of retransmission happened on the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMChlRptNoise 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.11
Noise observed on the channel.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RRMChlRptRadarIndtcr 1.3.6.1.4.1.2011.10.2.75.8.2.1.1.12
Radar detection status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER detected(1), notDetected(2)  

h3cDot11RRMNbrInfoTable 1.3.6.1.4.1.2011.10.2.75.8.2.2
This table shows the RRM neighbor information of each radio on all APs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11RRMNbrInfoEntry

h3cDot11RRMNbrInfoEntry 1.3.6.1.4.1.2011.10.2.75.8.2.2.1
Each entry contains information of RRM neighbor information of the radio on an AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11RRMNbrInfoEntry  

h3cDot11RrmNbrBSSID 1.3.6.1.4.1.2011.10.2.75.8.2.2.1.1
MAC address of the AP.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11RrmNbrChl 1.3.6.1.4.1.2011.10.2.75.8.2.2.1.2
Channel number on which the neighbor was found.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11RRMNbrIntrf 1.3.6.1.4.1.2011.10.2.75.8.2.2.1.3
Interference observed on the channel in percentage by neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RrmNbrRSSI 1.3.6.1.4.1.2011.10.2.75.8.2.2.1.4
Signal strength of the AP in dBm.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RrmNbrType 1.3.6.1.4.1.2011.10.2.75.8.2.2.1.5
Type of the AP, managed or unmanaged.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER managed(1), unmanaged(2)  

h3cDot11RrmNbrSSID 1.3.6.1.4.1.2011.10.2.75.8.2.2.1.6
SSID of the Neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11SSIDStringType  

h3cDot11RRMHistoryTable 1.3.6.1.4.1.2011.10.2.75.8.2.3
This table shows the details of the latest three channel changes and power changes applied on all APs, including time of change, reason of the change and the channel, power, interference parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11RRMHistoryEntry

h3cDot11RRMHistoryEntry 1.3.6.1.4.1.2011.10.2.75.8.2.3.1
Each entry shows the details of channel and power changes.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11RRMHistoryEntry  

h3cDot11RRMHistoryId 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.1
History number of the change.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

h3cDot11RRMHistoryRecIndctr 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.2
History record type of the change.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER before(1), after(2)  

h3cDot11RRMHistoryChl 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.3
Channel on which the radio operates before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11RRMHistoryPwr 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.4
Power of the radio before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RRMHistoryLoad 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.5
Load observed on the radio in percentage before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMHistoryUtlz 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.6
Utilization of the radio in percentage before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMHistoryIntrf 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.7
Interference observed on the radio in percentage before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMHistoryNoise 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.8
Noise observed on the radio before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11RRMHistoryPER 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.9
Packet error rate observed on the radio in percentage before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMHistoryRetryRate 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.10
Percentage of retransmission happened on the radio before/after the change of channel or power.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100  

h3cDot11RRMHistoryChgReason 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.11
Reason for the change of channel or power. The various bit positions are: |0 |Others | |1 |Coverage | |2 |Radar | |3 |Retransmission | |4 |Packets discarded | |5 |Interference | 0 is returned when the history record type is after.
Status: current Access: read-only
OBJECT-TYPE    
  BITS others(0), coverage(1), radar(2), retransmission(3), packetsDiscarded(4), interference(5)  

h3cDot11RRMHistoryChgDateTime 1.3.6.1.4.1.2011.10.2.75.8.2.3.1.12
The time when the channel or power change occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11RRMNotifyGroup 1.3.6.1.4.1.2011.10.2.75.8.3
OBJECT IDENTIFIER    

h3cDot11RRMChlQltyNotifications 1.3.6.1.4.1.2011.10.2.75.8.3.1
OBJECT IDENTIFIER    

h3cDot11RRMChlQltyNtfPrefix 1.3.6.1.4.1.2011.10.2.75.8.3.1.0
OBJECT IDENTIFIER    

h3cDot11RRMIntrfLimit 1.3.6.1.4.1.2011.10.2.75.8.3.1.0.1
This notification will be sent when interference on the radio exceeds the limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11RRMPERLimit 1.3.6.1.4.1.2011.10.2.75.8.3.1.0.2
This notification will be sent when packet error rate on the radio exceeds the limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11RRMNoiseLimit 1.3.6.1.4.1.2011.10.2.75.8.3.1.0.3
This notification will be sent when noise on the radio exceeds the limit.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11RRMResChgNotifications 1.3.6.1.4.1.2011.10.2.75.8.3.2
OBJECT IDENTIFIER    

h3cDot11RRMResChgNtfPrefix 1.3.6.1.4.1.2011.10.2.75.8.3.2.0
OBJECT IDENTIFIER    

h3cDot11RRMPowerChange 1.3.6.1.4.1.2011.10.2.75.8.3.2.0.1
This notification will be sent when power changed on the radio automatically.
Status: current Access: read-only
NOTIFICATION-TYPE    

h3cDot11RRMNotificationsVar 1.3.6.1.4.1.2011.10.2.75.8.3.3
OBJECT IDENTIFIER    

h3cDot11NewPower 1.3.6.1.4.1.2011.10.2.75.8.3.3.1
Power of the radio after the change of power.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

h3cDot11OldPower 1.3.6.1.4.1.2011.10.2.75.8.3.3.2
Power of the radio before the change of power.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32  

h3cDot11MonitorDetectedGroup 1.3.6.1.4.1.2011.10.2.75.8.4
OBJECT IDENTIFIER    

h3cDot11MonitorDetectedDevTable 1.3.6.1.4.1.2011.10.2.75.8.4.1
This table shows the devices of AP detected
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDot11MonitorDetectedDevEntry

h3cDot11MonitorDetectedDevEntry 1.3.6.1.4.1.2011.10.2.75.8.4.1.1
Each entry contains information of detected devices.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDot11MonitorDetectedDevEntry  

h3cDot11MonitorDevMAC 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.1
Represents MAC address of the device detected.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDot11MonitorDevType 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.2
Represents type of the device detected.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER client(1), ap(2), adhoc(3), wirelessBridge(4), unknown(5)  

h3cDot11MonitorDevVendor 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.3
Represents vendor of the detected device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11MonitorDevSSID 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.4
Represents the service set identifier for the ESS of the device which type is ap or adhoc.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

h3cDot11MonitorDevBSSID 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.5
Represents the basic service set identifier of the detected device.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

h3cDot11MonitorDevChannel 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.6
Represents the channel in which the device was last detected. AP will choose the channel which has maximum signal strength as effective channel, as there is interference between adjacent channels.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11ChannelScopeType  

h3cDot11MonitorRadioId 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.7
Represents the radio ID of the AP that detected the device.
Status: current Access: read-only
OBJECT-TYPE    
  H3cDot11RadioScopeType  

h3cDot11MonitorDevMaxRSSI 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.8
Represents the maximum detected RSSI of the device in a scan report cycle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11MonitorDevBeaconIntvl 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.9
Represents the beacon interval for the detected device(not include the device which type is client).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDot11MonitorDevFstDctTime 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.10
Represents the time at which the device was first detected.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11MonitorDevLstDctTime 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.11
Represents the time at which the device was detected last time.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

h3cDot11MonitorDevClear 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.12
This object is used to clear the information of the device detected in the WLAN. It will return false for get operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDot11MonitorDevSNR 1.3.6.1.4.1.2011.10.2.75.8.4.1.1.13
Represents the SNR of the device in a scan report cycle.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32