H3C-DOT11-REF-MIB
File:
H3C-DOT11-REF-MIB.mib (21601 bytes)
Imported modules
Imported symbols
Defined Types
H3cDot11ObjectIDType |
|
Represents AP identifier value type. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(0..127) |
|
H3cDot11RadioType |
|
Represents AP 802.11 radio type of 802.11a/b/g/n as per
the standard.
The following values are supported:
dot11a(1) - 802.11a
dot11b(2) - 802.11b
dot11g(4) - 802.11g
dot11n(8) - 802.11n
|
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
dot11a(1), dot11b(2), dot11g(4), dot11n(8), dot11gn(16), dot11an(32) |
|
H3cDot11RadioType2 |
|
Represents AP 802.11 radio type of 802.11a/b/g/an/gn as per
the standard.
The following values are supported:
dot11a(1) - 802.11a
dot11b(2) - 802.11b
dot11g(4) - 802.11g
dot11an(8) - 802.11an
dot11gn(16) - 802.11gn
|
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) |
|
H3cDot11MACModeType |
|
CAPWAP defines three kinds MAC mode for fit AP.
The management packet will be exchanged between AP and AC by
CAPWAP control tunnel.
For data packet, the following MAC mode are supported:
split(1) - AP will tunnel 802.11 data message
- to AC by CAPWAP,
localtunnel(2) - AP will convert data to 802.3, then tunnel
- it to AC by CAPWAP,
localbridge(3) - AP will directly handle data packet without
- sending to AC to process,
fatAP - For fat AP, it will handle all 802.11 frames
- by itself. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
split(1), localtunnel(2), localbridge(3), fatAP(4) |
|
H3cDot11NotifyReasonType |
|
The explanation string is for the event notification of dot11. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(0..255) |
|
H3cDot11SSIDEncryptModeType |
|
Represents encryption mode for the specific ESS:
The following values are supported:
cleartxt(1) - clear txt,
cipher(2) - WPA and 802.11i
ext(3) - ext. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
cleartxt(1), cipher(2), ext(3) |
|
H3cDot11PreambleType |
|
Represents the current radio preamble type.
The following values are supported:
long(1) - long preambles,
short(2) - short preambles. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
long(1), short(2) |
|
H3cDot11RFModeType |
|
Represents RF management mode.
The following values are supported:
manual(1) - Configure RF parameter by manual,
auto(2) - Automaticall configure. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
manual(1), auto(2) |
|
H3cDot11TunnelSecSchemType |
|
Represents which security scheme option is available for
CAPWAP tunnel.
The following values are supported:
cleartxt(1) - No encryption protection,
dtls(2) - Encrypted by DTLS,
ipsec(3) - Encrypted by IPSEC. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
cleartxt(1), dtls(2), ipsec(3) |
|
H3cDot11SecIEStatusType |
|
To enable the WPA Information element in the beacon and probe
response frames sent by AP.
The following values are supported:
none(1) - both wpa and rsn are disabled,
rsn(2) - only enable rsn,
wpa(3) - only enable wpa,
all(4) - both wpa and rsn are enabled,
ext(5) - only enable ext. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
none(1), rsn(2), wpa(3), all(4), ext(5) |
|
H3cDot11CipherType |
|
Represents the frame encryption cipher types for
frames on IEEE 802.11 radio interfaces.
The MIB defines TC by referring to the 802.11i protocol.
The following values are supported:
none(1) - clear text or no cipher method is configure,
wep40(2) - 40-bit WEP key,
tkip(4) - WPA Temporal Key encryption,
aesccmp(16) - WPA AES CCMP encryption,
wep104(32) - 104-bit WEP key,
wpisms4(64) - ext encryption,
wep128(128) - 128-bit WEP key. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
none(1), wep40(2), tkip(4), aesccmp(16), wep104(32), wpisms4(64), wep128(128) |
|
H3cDot11AuthenType |
|
Represents the Authentication mode defined by 802.11.
The following values are supported:
none(1) - No authentication mode configured,
opensystem(2) - In fact,no real authentication happened,
sharedkey(3) - System will use challenge message to
- authenticate the access user,
all(4) - both open system and shared key. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
none(1), opensystem(2), sharedkey(3), all(4) |
|
H3cDot11AKMType |
|
Represents the key management mode defined by 802.11i.
The following values are supported:
none(1) - No key management mode configured,
psk(2) - pre-shared key authentication,
dot1x(3) - 802.1x authentication,
ext(4) - ext. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
none(1), psk(2), dot1x(3), ext(4) |
|
H3cDot11AssocFailType |
|
Enumeration of the reasons for station association failure.
including:
unknownfailure(1) - unknown failure,
toomanyassoc(2) - too many association,
invalidie(3) - information element is invalid,
unsupportedrate(4) - rate is not supported,
unsupportedpwrcap(5) - power capability is not supported
unsupportedcap(6) - capability is not supported |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
unknownfailure(1), toomanyassoc(2), invalidie(3), unsupportedrate(4), unsupportedpwrcap(5), unsupportedcap(6) |
|
H3cDot11AuthorFailType |
|
Enumeration of the reasons for station authorization failure.
including:
unknownfailure(1) - unknown failure,
invalidie(2) - information element is invalid,
rsnieversionunsupported(3) - rsn information element version
is not supported,
wpaieversionunsupported(4) - wpa information element version
is not supported,
groupcipherinvalid(5) - group cipher is invalid,
pairwisecipherinvalid(6) - pairwise cipher is invalid,
akminvalid(7) - akm is invalid |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
unknownfailure(1), invalidie(2), rsnieversionunsupported(3), wpaieversionunsupported(4), groupcipherinvalid(5), pairwisecipherinvalid(6), akminvalid(7) |
|
H3cDot11QosAcType |
|
802.11e defines four types of access category, including:
acbk(1) - for background access category,
acbe(2) - for besteffort access category,
acvi(3) - for voice access category,
acvo(4) - for video access category
|
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
acbk(1), acbe(2), acvi(3), acvo(4) |
|
H3cDot11RadioElementIndex |
|
Represents index of radio. For split architecture, It comprises two parts.
The lowest 8 bits mean radio ID. The highest 8 bits are reserved. The
highest 8 bits stand for AP ID. The meaning is shown as follows:
31 23 15 7 0
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
| reserved | AP ID | radio ID |
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
For FAT AP, the type represents ifIndex of radio.
|
TEXTUAL-CONVENTION |
|
|
|
|
Unsigned32 |
|
|
H3cDot11WorkMode |
|
Work mode of device.
In normal mode, the device will provide WLAN service.
In monitor mode, the device will monitor the environment.
In hybrid mode, the device will provide WLAN service while monitoring the
environment. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
normal(1), monitor(2), hybrid(3) |
|
H3cDot11CirMode |
|
The mode of committed information rate.
'static' means station will use the configured CIR seperately.
For example, if the CIR is 1Mbps, every station can enjoy 1Mbps.
'dynamic' means all stations will share the configured CIR in common. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
static(1), dynamic(2) |
|
H3cDot11SaIntfDevType |
|
The type of interference device. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
microwave(1), microwaveInverter(2), bluetooth(3), fixedFreqOthers(4), fixedFreqCordlessPhone(5), fixedFreqVideo(6), fixedFreqAudio(7), freqHopperOthers(8), freqHopperCordlessBase(9), freqHopperCordlessNetwork(10), freqHopperXbox(11), genericInterferer(12) |
|
H3cDot11APElementEntry |
|
SEQUENCE |
|
|
|
|
h3cDot11APElementIndex |
Integer32 |
|
|
h3cDot11APElementTemplateName |
OCTET STRING |
|
|
h3cDot11APElementSerialID |
OCTET STRING |
|
|
h3cDot11APElementModelAlias |
OCTET STRING |
|
H3cDot11RadioElementEntry |
|
SEQUENCE |
|
|
|
|
h3cDot11RadioElementRadioNum |
Unsigned32 |
|
|
h3cDot11RadioElementRadioPolicy |
OCTET STRING |
|
|
h3cDot11RadioElementRadioIndex |
Unsigned32 |
|
Defined Values
h3cDot11 |
1.3.6.1.4.1.2011.10.2.75 |
This MIB defines the root node and TC for 802.11 features.
By this way, the MIB series for 802.11 will be easily maintained.
GLOSSARY
IEEE 802.11
Standard to encourage interoperability among
wireless networking equipment.
IEEE 802.11a
This is a high speed physical layer extension to
the 802.11 standard on the 5 GHz band.
IEEE 802.11b
High-rate wireless LAN standard for wireless
data transfer at up to 11 Mbps.
IEEE 802.11g
Higher Speed Physical Layer (PHY) Extension to
IEEE 802.11b, will boost wireless LAN speed to 54
Mbps by using OFDM (orthogonal frequency division
multiplexing). The IEEE 802.11g specification is
backward compatible with the widely deployed IEEE
802.11b standard.
When configure radio with as bg mode, it means that
radio will be compatible to 802.11b and 802.11g.
When configure radio with as g mode, it means that
radio will be only compatible to 802.11g.
IEEE 802.11i
As 802.11 has lot of deficiency in wireless security
domain, especially for enterprise custom, IEEE defined
a new standard 802.11i to extend security feature of
802.11 standard.
AKM
The authentication and key management method defined by
802.11i, and which includes 802.1x and pre-shared key. |
MODULE-IDENTITY |
|
|
|
h3cDot11APElementTable |
1.3.6.1.4.1.2011.10.2.75.12.1.1 |
This table is used to represent fat AP and AP template on AC
as one kind of AP element. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
H3cDot11APElementEntry |
|
h3cDot11APElementEntry |
1.3.6.1.4.1.2011.10.2.75.12.1.1.1 |
Each entry contains information for each AP element. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cDot11APElementEntry |
|
|
h3cDot11APElementIndex |
1.3.6.1.4.1.2011.10.2.75.12.1.1.1.1 |
This object represents the index of AP element. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
h3cDot11APElementTemplateName |
1.3.6.1.4.1.2011.10.2.75.12.1.1.1.2 |
This object represents the template name of AP element. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cDot11APElementSerialID |
1.3.6.1.4.1.2011.10.2.75.12.1.1.1.3 |
This object represents the serial ID of AP element. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cDot11APElementModelAlias |
1.3.6.1.4.1.2011.10.2.75.12.1.1.1.4 |
This object represents the alias of AP element model name. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cDot11RadioElementEntry |
1.3.6.1.4.1.2011.10.2.75.12.1.2.1 |
Each entry contains information for each radio element. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
H3cDot11RadioElementEntry |
|
|
h3cDot11RadioElementRadioPolicy |
1.3.6.1.4.1.2011.10.2.75.12.1.2.1.2 |
This object represents the radio policy of the radio element. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
h3cDot11RadioElementRadioIndex |
1.3.6.1.4.1.2011.10.2.75.12.1.2.1.3 |
This object represents the index of the radio element.
On AC, the higher 24 bits stand for the AP index,
and the last 8 bits stand for the radio index.
On fat AP, the index stands for the interface index of radio
interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|