H3C-DOT11-QOS-MIB

File: H3C-DOT11-QOS-MIB.mib (20942 bytes)

Imported modules

H3C-DOT11-REF-MIB

Imported symbols

TruthValue	TEXTUAL-CONVENTION	MODULE-IDENTITY
OBJECT-TYPE	Integer32	h3cDot11
H3cDot11QosAcType	H3cDot11RadioElementIndex	H3cDot11ObjectIDType
H3cDot11RadioScopeType

Defined Types

H3cDot11WMMSVPMapAC
The AC level which SVP packets are assigned to. acbk : for background access category, acbe : for best-effort access category, acvi : for voice access category, acvo : for video access category, disable : for disable SVP feature
TEXTUAL-CONVENTION
	INTEGER	acbk(1), acbe(2), acvi(3), acvo(4), disable(5)

H3cDot11WMMCACPolicy
The policy of CAC. channelUtilization : the channel utilization-based admission policy for CAC, userNumber : the users-based admission policy for CAC
TEXTUAL-CONVENTION
	INTEGER	channelUtilization(1), userNumber(2)

H3cDot11RadioWmmCfgEntry
SEQUENCE
	h3cDot11WmmRadioIndex	H3cDot11RadioElementIndex
	h3cDot11RadioWmmEnabled	TruthValue
	h3cDot11RadioSVPMapToAC	H3cDot11WMMSVPMapAC
	h3cDot11RadioCacPolicy	H3cDot11WMMCACPolicy
	h3cDot11RadioCacChlUtlValue	Integer32
	h3cDot11RadioCacUserNum	Integer32

H3cDot11RadioWmmEdcaCfgEntry
SEQUENCE
	h3cDot11RadioWmmAC	H3cDot11QosAcType
	h3cDot11RadioWmmAifsn	Integer32
	h3cDot11RadioWmmEcwMin	Integer32
	h3cDot11RadioWmmEcwMax	Integer32
	h3cDot11RadioWmmTxoplimit	Integer32
	h3cDot11RadioWmmNoAck	TruthValue

H3cDot11StationWmmEdcaEntry
SEQUENCE
	h3cDot11StationWmmAC	H3cDot11QosAcType
	h3cDot11StationWmmAifsn	Integer32
	h3cDot11StationWmmEcwMin	Integer32
	h3cDot11StationWmmEcwMax	Integer32
	h3cDot11StationWmmTxoplimit	Integer32
	h3cDot11StationWmmCacEnabled	TruthValue

H3cDot11RadioWmmEdcaCfg2Entry
SEQUENCE
	h3cDot11WMMAPSerialID	H3cDot11ObjectIDType
	h3cDot11WMMRdId	H3cDot11RadioScopeType
	h3cDot11RdWmmAC	H3cDot11QosAcType
	h3cDot11RdWmmAifsn	Integer32
	h3cDot11RdWmmEcwMin	Integer32
	h3cDot11RdWmmEcwMax	Integer32
	h3cDot11RdWmmTxoplimit	Integer32

Defined Values

h3cDot11QoS		1.3.6.1.4.1.2011.10.2.75.9
This MIB provides information about WLAN QoS configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. WMM WMM is a wireless QoS protocol designed to preferentially transmit packets with high priority, thus guaranteeing better QoS services for voice and video applications in a wireless network. EDCA Enhanced distributed channel access (EDCA) is a channel contention mechanism designed by WMM to preferentially transmit packets with high priority and allocate more bandwidth to such packets. AC Access category (AC), is used for channel contention. WMM defines four access categories; they are AC-VO (voice), AC-VI (video), AC-BE (best-effort), and AC-BK (background) in the descending order of priority. When contending for a channel, a high-priority AC preempts a low-priority AC. CAC Connection admission control (CAC) limits the number of clients that are using high-priority ACs (AC-VO and AC-VI) to guarantee sufficient bandwidth for existing high-priority traffic. U-APSD Unscheduled automatic power-save delivery (U-APSD) is a new power saving mechanism defined by WMM to enhance the power saving capability of clients. SVP SpectraLink voice priority (SVP) is a voice priority protocol designed by the Spectralink company to guarantee QoS for voice traffic.
MODULE-IDENTITY

h3cDot11WmmCfgGroup		1.3.6.1.4.1.2011.10.2.75.9.1
OBJECT IDENTIFIER

h3cDot11RadioWmmCfgTable		1.3.6.1.4.1.2011.10.2.75.9.1.1
The table defines the basic parameters for WMM configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDot11RadioWmmCfgEntry

h3cDot11RadioWmmCfgEntry		1.3.6.1.4.1.2011.10.2.75.9.1.1.1
This entry contains the basic information for WMM configuration.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11RadioWmmCfgEntry

h3cDot11WmmRadioIndex		1.3.6.1.4.1.2011.10.2.75.9.1.1.1.1
Represents index of the radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11RadioElementIndex

h3cDot11RadioWmmEnabled		1.3.6.1.4.1.2011.10.2.75.9.1.1.1.2
Represents the status of WMM in radio. 'true' : The WMM function is enabled. 'false': The WMM function is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDot11RadioSVPMapToAC		1.3.6.1.4.1.2011.10.2.75.9.1.1.1.3
Represents the AC level which SVP packets are assigned to. 'acbk' : Specifies the AC-BK (background traffic) queue. 'acbe' : Specifies the AC-BE (best-effort traffic) queue. 'acvi' : Specifies the AC-VI (video traffic) queue. 'acvo' : Specifies the AC-VO (voice traffic) queue. 'disable' : Disable SVP packet mapping.
Status: current	Access: read-write
OBJECT-TYPE
	H3cDot11WMMSVPMapAC

h3cDot11RadioCacPolicy		1.3.6.1.4.1.2011.10.2.75.9.1.1.1.4
Represents the policy for CAC. CAC requires that a client obtain permission of the AP before it can use a high-priority AC for transmission, thus guaranteeing bandwidth to the clients that have gained access. CAC controls real time traffic (AC-VO and AC-VI traffic) but not common data traffic (AC-BE and AC-BK traffic).
Status: current	Access: read-write
OBJECT-TYPE
	H3cDot11WMMCACPolicy

h3cDot11RadioCacChlUtlValue		1.3.6.1.4.1.2011.10.2.75.9.1.1.1.5
Represents Maximum channel utilization rate, that is, the medium time of the accepted AC-VO traffic and AC-VI traffic to the valid time during the unit time. This object can be set only if the value of h3cDot11RadioCacPolicy is ChannelUtilization.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..100

h3cDot11RadioCacUserNum		1.3.6.1.4.1.2011.10.2.75.9.1.1.1.6
Represents the users-based admission policy for CAC. This object can be set only if the value of h3cDot11RadioCacPolicy is userNumber.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..64

h3cDot11RadioWmmEdcaCfgTable		1.3.6.1.4.1.2011.10.2.75.9.1.2
The table defines the basic parameters for EDCA configuration of radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDot11RadioWmmEdcaCfgEntry

h3cDot11RadioWmmEdcaCfgEntry		1.3.6.1.4.1.2011.10.2.75.9.1.2.1
This entry contains the basic information for EDCA configuration of radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11RadioWmmEdcaCfgEntry

h3cDot11RadioWmmAC		1.3.6.1.4.1.2011.10.2.75.9.1.2.1.1
Represents the AC level index of EDCA parameters of radio. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11QosAcType

h3cDot11RadioWmmAifsn		1.3.6.1.4.1.2011.10.2.75.9.1.2.1.2
Represents AIFSN parameter of EDCA. The value range of this object is limited by the radio chip capability.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..15

h3cDot11RadioWmmEcwMin		1.3.6.1.4.1.2011.10.2.75.9.1.2.1.3
Represents ECWmin parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be smaller than ECWmax parameter.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

h3cDot11RadioWmmEcwMax		1.3.6.1.4.1.2011.10.2.75.9.1.2.1.4
Represents ECWmax parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be larger than ECWmax parameter.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

h3cDot11RadioWmmTxoplimit		1.3.6.1.4.1.2011.10.2.75.9.1.2.1.5
Represents TXOPLimit parameter of EDCA, the value must be in the range of 0 to 65535 (in units of 32 microseconds). The TXOP value of 0 indicates that only one MPDU can be transmitted. The range of this argument is limited by the radio chip capability.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

h3cDot11RadioWmmNoAck		1.3.6.1.4.1.2011.10.2.75.9.1.2.1.6
Represents the AC to adopt the No ACK policy. The protocol defines two ACK policies: Normal ACK and No ACK.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDot11StationWmmEdcaTable		1.3.6.1.4.1.2011.10.2.75.9.1.3
The table defines the basic parameters for EDCA configuration of station.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDot11StationWmmEdcaEntry

h3cDot11StationWmmEdcaEntry		1.3.6.1.4.1.2011.10.2.75.9.1.3.1
This entry contains the basic information for EDCA configuration of client. If CAC is enabled for an AC, CAC is also enabled for ACs with higher priority. For example, if CAC is enabled for AC-VI, CAC is also enabled for AC-VO. However, enabling CAC for AC-VO does not enable CAC for AC-VI.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11StationWmmEdcaEntry

h3cDot11StationWmmAC		1.3.6.1.4.1.2011.10.2.75.9.1.3.1.1
Represents the AC level index of EDCA parameters of client. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11QosAcType

h3cDot11StationWmmAifsn		1.3.6.1.4.1.2011.10.2.75.9.1.3.1.2
Represents AIFSN parameter of EDCA.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..15

h3cDot11StationWmmEcwMin		1.3.6.1.4.1.2011.10.2.75.9.1.3.1.3
Represents ECWmin parameter of EDCA.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

h3cDot11StationWmmEcwMax		1.3.6.1.4.1.2011.10.2.75.9.1.3.1.4
Represents ECWmax parameter of EDCA.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

h3cDot11StationWmmTxoplimit		1.3.6.1.4.1.2011.10.2.75.9.1.3.1.5
Represents TXOPLimit parameter of EDCA, the value is in units of 32 microseconds. The TXOP value of 0 indicates that only one MPDU can be transmitted.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

h3cDot11StationWmmCacEnabled		1.3.6.1.4.1.2011.10.2.75.9.1.3.1.6
Represents the AC to adopt the No ACK policy. The protocol defines two ACK policies: Normal ACK and No ACK. Only if the value of h3cDot11StationWmmAC is 'acvo' or 'acvi', Cac can be set correctly here.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

h3cDot11WmmResetGroup		1.3.6.1.4.1.2011.10.2.75.9.1.4
OBJECT IDENTIFIER

h3cDot11WmmResetRadioByAP		1.3.6.1.4.1.2011.10.2.75.9.1.4.1
Clear the WMM statistics information of the radio of the specified AP or all radios. The meaning of this object is the same as h3cDot11APElementIndex, it represents the index of AP element. If the value of this object is set to 0xFFFFFFFF, WMM statistics information of all radios will be cleared. The value of this object is always 0 with the get operation.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

h3cDot11WmmResetStationByAP		1.3.6.1.4.1.2011.10.2.75.9.1.4.2
Clear the WMM statistics information of the clients associated with the specified AP, or of all clients. The meaning of this object is the same as h3cDot11APElementIndex, it represents the index of AP element. If set with the 0xFFFFFFFF, it will clear the WMM statistics information of all clients. The value of this object is always 0 with the get operation.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

h3cDot11RadioWmmEdcaCfg2Table		1.3.6.1.4.1.2011.10.2.75.9.1.5
The table defines the basic parameters for EDCA configuration of radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		H3cDot11RadioWmmEdcaCfg2Entry

h3cDot11RadioWmmEdcaCfg2Entry		1.3.6.1.4.1.2011.10.2.75.9.1.5.1
This entry contains the basic information for EDCA configuration of radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11RadioWmmEdcaCfg2Entry

h3cDot11WMMAPSerialID		1.3.6.1.4.1.2011.10.2.75.9.1.5.1.1
Serial ID of the AP.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11ObjectIDType

h3cDot11WMMRdId		1.3.6.1.4.1.2011.10.2.75.9.1.5.1.2
radio ID of the radio.
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11RadioScopeType

h3cDot11RdWmmAC		1.3.6.1.4.1.2011.10.2.75.9.1.5.1.3
Represents the AC level index of EDCA parameters of radio. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
Status: current	Access: not-accessible
OBJECT-TYPE
	H3cDot11QosAcType

h3cDot11RdWmmAifsn		1.3.6.1.4.1.2011.10.2.75.9.1.5.1.4
Represents AIFSN parameter of EDCA. The value range of this object is limited by the radio chip capability.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..15

h3cDot11RdWmmEcwMin		1.3.6.1.4.1.2011.10.2.75.9.1.5.1.5
Represents ECWmin parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be smaller than ECWmax parameter.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

h3cDot11RdWmmEcwMax		1.3.6.1.4.1.2011.10.2.75.9.1.5.1.6
Represents ECWmax parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be larger than ECWmax parameter.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..15

h3cDot11RdWmmTxoplimit		1.3.6.1.4.1.2011.10.2.75.9.1.5.1.7
Represents TXOPLimit parameter of EDCA, the value must be in the range of 0 to 65535 (in units of 32 microseconds). The TXOP value of 0 indicates that only one MPDU can be transmitted. The range of this argument is limited by the radio chip capability.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor