H3C-DLDP-MIB

File: H3C-DLDP-MIB.mib (13870 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI RFC1213-MIB
HUAWEI-3COM-OID-MIB

Imported symbols

TruthValue MacAddress TEXTUAL-CONVENTION
MODULE-IDENTITY OBJECT-TYPE Counter32
Integer32 NOTIFICATION-TYPE ifIndex
h3cCommon

Defined Types

EnabledStatus  
The current state of the Ethernet port. This object has two defined values: - 'enabled', which indicates that the Ethernet port enables DLDP. - 'disabled', which indicates that the Ethernet port does not enable DLDP.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

DLDPStatus  
Operating state of DLDP on the port. This object has six defined values: - 'initial', which indicates that the Ethernet port does not enable DLDP. This status does not appear in the 'h3cDLDPPortDLDPState' object (below) because the port which is not enabled DLDP does not appear in 'h3cDLDPPortDLDPTable', it appears in 'h3cDLDPPortStateTable'. - 'inactive', which indicates that the Ethernet port enables DLDP and the link status of the port is down. - 'active', which indicates that the Ethernet port enables DLDP and the link status of the port is up. - 'advertisement', which indicates that all neighbors of the port are bidirectional communication. - 'probe', which indicates that the port sends PDU to detect the communication mode between it and it's neighbors. - 'disable', which indicates that an unidirectional communication between the port and it's neighbor. When the user get or walk the 'h3cDLDPPortDLDPState' objects (below) these status will output.
TEXTUAL-CONVENTION    
  INTEGER initial(1), inactive(2), active(3), advertisement(4), probe(5), disable(6)  

DLDPNeighborStatus  
The current state of the neighbor of a port. This object has three defined values: - 'unidirection', which indicates an unidirectional communication between the port and it's neighbor. - 'bidirection', which indicates a bidirectional communication between the port and it's neighbor. - 'unknown', which indicates that the port does not know the communication mode between it and it's neighbor. When the user get or walk the 'h3cDLDPNeighborState' objects (below) these status will output.
TEXTUAL-CONVENTION    
  INTEGER unidirection(1), bidirection(2), unknown(3)  

H3cDLDPPortStateEntry  
SEQUENCE    
  h3cDLDPPortState EnabledStatus

H3cDLDPPortDLDPEntry  
SEQUENCE    
  h3cDLDPPortDLDPState DLDPStatus
  h3cDLDPLinkState INTEGER
  h3cDLDPPortDLDPReset TruthValue

H3cDLDPNeighborEntry  
SEQUENCE    
  h3cDLDPNeighborBridgeMac MacAddress
  h3cDLDPNeighborPortIndex Integer32
  h3cDLDPNeighborState DLDPNeighborStatus
  h3cDLDPNeighborAgingTime Integer32

Defined Values

h3cDldp 1.3.6.1.4.1.2011.10.2.43
HUAWEI-3COM DLDP (Device Link Detection Protocol) MIB
MODULE-IDENTITY    

h3cDLDPMibObject 1.3.6.1.4.1.2011.10.2.43.1
OBJECT IDENTIFIER    

h3cDLDPConfigGroup 1.3.6.1.4.1.2011.10.2.43.1.1
OBJECT IDENTIFIER    

h3cDLDPWorkMode 1.3.6.1.4.1.2011.10.2.43.1.1.1
The work mode of DLDP. Normal mode means DLDP does not detect neighbor on its own initiative when all neighbors aged. Enhance mode means DLDP detects neighbor on its own initiative when all neighbors aged.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), enhance(2)  

h3cDLDPSystemEnable 1.3.6.1.4.1.2011.10.2.43.1.1.2
DLDP enable or disable systematically. This node only supports set operation. If setting it to true, all the fiber ports will enable DLDP and the agent automatically creates new rows for each port in h3cDLDPPortDLDPTable. If setting it to false, all the fiber ports will disable DLDP and the agent automatically destroy the corresponding rows in h3cDLDPPortDLDPTable.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDLDPSystemReset 1.3.6.1.4.1.2011.10.2.43.1.1.3
DLDP reset systematically. This node only supports set operation. If the value of h3cDLDPSystemReset is true, and the current state is disable, it will change to inactive while the port is down or active while the port is up. If h3cDLDPPortDLDPState is not disable, it does not change.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDLDPInterval 1.3.6.1.4.1.2011.10.2.43.1.1.4
The interval of sending an advertisement PDU. unit : second
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..100  

h3cDLDPAuthenticationMode 1.3.6.1.4.1.2011.10.2.43.1.1.5
Type of authentication mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), simple(2), md5(3)  

h3cDLDPAuthenticationPassword 1.3.6.1.4.1.2011.10.2.43.1.1.6
This is the password for authentication. If the value of h3cDLDPAuthenticationMode is null, the user cannot set this node. If the value of h3cDLDPAuthenticationMode is simple or MD5, the user must set this node with a string. When the user gets or walks this node, it displays a cipher password if h3cDLDPAuthenticationMode is MD5 or simple or a zero-length string if h3cDLDPAuthenticationMode is null.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..53)  

h3cDLDPUnidirectionalShutdown 1.3.6.1.4.1.2011.10.2.43.1.1.7
The mode of unidirectional shutdown. It indicates the shutdown mode when a unidirectional link happened. Auto mode means the port will be shut down automatically when DLDP detects unidirectional link. Manual mode means the port needs to be shut down by the administrator manually when DLDP detects unidirectional link.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), manual(2)  

h3cDLDPPortStateTable 1.3.6.1.4.1.2011.10.2.43.1.2
The table of the Ethernet ports of a LAN switch.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDLDPPortStateEntry

h3cDLDPPortStateEntry 1.3.6.1.4.1.2011.10.2.43.1.2.1
Information about a h3cDLDPPortDLDPTable entity.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDLDPPortStateEntry  

h3cDLDPPortState 1.3.6.1.4.1.2011.10.2.43.1.2.1.1
State of a port. If setting it to enabled, the port will enable DLDP and a new row will be added in h3cDLDPPortDLDPTable for this port. If setting it to disabled, the port will disable DLDP and the corresponding row will be destroyed in h3cDLDPPortDLDPTable.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

h3cDLDPPortDLDPTable 1.3.6.1.4.1.2011.10.2.43.1.3
Table of a LAN switch's ports, which enable DLDP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDLDPPortDLDPEntry

h3cDLDPPortDLDPEntry 1.3.6.1.4.1.2011.10.2.43.1.3.1
The information of a port, which enable DLDP.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDLDPPortDLDPEntry  

h3cDLDPPortDLDPState 1.3.6.1.4.1.2011.10.2.43.1.3.1.1
Operating state of DLDP on the port. It is relational with h3cDLDPPortState and h3cDLDPLinkState.
Status: current Access: read-only
OBJECT-TYPE    
  DLDPStatus  

h3cDLDPLinkState 1.3.6.1.4.1.2011.10.2.43.1.3.1.2
The link state of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), up(2), unknown(3)  

h3cDLDPPortDLDPReset 1.3.6.1.4.1.2011.10.2.43.1.3.1.3
DLDP reset systematically. This node only supports set operation. If the value of h3cDLDPPortDLDPReset is true, and the current state is disable, it will change to inactive while the port is down or active while the port is up.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

h3cDLDPNeighborTable 1.3.6.1.4.1.2011.10.2.43.1.4
Table of a port's neighbors.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDLDPNeighborEntry

h3cDLDPNeighborEntry 1.3.6.1.4.1.2011.10.2.43.1.4.1
The information of a neighbor.
Status: current Access: not-accessible
OBJECT-TYPE    
  H3cDLDPNeighborEntry  

h3cDLDPNeighborBridgeMac 1.3.6.1.4.1.2011.10.2.43.1.4.1.1
The bridge MAC address of a neighbor.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

h3cDLDPNeighborPortIndex 1.3.6.1.4.1.2011.10.2.43.1.4.1.2
The port index of a neighbor.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

h3cDLDPNeighborState 1.3.6.1.4.1.2011.10.2.43.1.4.1.3
The state of a neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  DLDPNeighborStatus  

h3cDLDPNeighborAgingTime 1.3.6.1.4.1.2011.10.2.43.1.4.1.4
The aging time of a neighbor. unit: second.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cDLDPTrapObject 1.3.6.1.4.1.2011.10.2.43.2
OBJECT IDENTIFIER    

h3cDLDPNotification 1.3.6.1.4.1.2011.10.2.43.2.1
OBJECT IDENTIFIER    

h3cDLDPUnidirectionalPort 1.3.6.1.4.1.2011.10.2.43.2.1.1
It will send a SNMP trap when the state of a port has changed to unidirectional-link.
Status: current Access: read-only
NOTIFICATION-TYPE