H3C-DHCPRELAY-MIB

File: H3C-DHCPRELAY-MIB.mib (26769 bytes)

Imported modules

SNMPv2-TC SNMPv2-SMI RFC1213-MIB
INET-ADDRESS-MIB HUAWEI-3COM-OID-MIB

Imported symbols

TruthValue RowStatus MacAddress
MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 ifIndex InetAddress
InetAddressType h3cCommon

Defined Types

H3cDHCPRIfSelectEntry  
SEQUENCE    
  h3cDHCPRIfSelectRelayMode INTEGER

H3cDHCPRIpToGroupEntry  
SEQUENCE    
  h3cDHCPRIpToGroupGroupId Integer32
  h3cDHCPRIpToGroupServerIpType InetAddressType
  h3cDHCPRIpToGroupServerIp InetAddress
  h3cDHCPRIpToGroupRowStatus RowStatus

H3cDHCPRIfToGroupEntry  
SEQUENCE    
  h3cDHCPRIfToGroupGroupId Integer32
  h3cDHCPRIfToGroupRowStatus RowStatus

H3cDHCPRAddrCheckEntry  
SEQUENCE    
  h3cDHCPRAddrCheckSwitch INTEGER

H3cDHCPRSecurityEntry  
SEQUENCE    
  h3cDHCPRSecurityClientIpAddrType InetAddressType
  h3cDHCPRSecurityClientIpAddr InetAddress
  h3cDHCPRSecurityClientMacAddr MacAddress
  h3cDHCPRSecurityClientProperty INTEGER
  h3cDHCPRSecurityClientRowStatus RowStatus

H3cDHCPRConfigOption82IfEntry  
SEQUENCE    
  h3cDHCPROption82IfSwitch INTEGER
  h3cDHCPROption82IfStrategy INTEGER
  h3cDHCPROption82IfFormat INTEGER
  h3cDHCPROption82IfNodeType INTEGER
  h3cDHCPROption82IfUsrDefString STRING

Defined Values

h3cDhcpRelay 1.3.6.1.4.1.2011.10.2.58
HUAWEI-3COM DHCPR MIB
MODULE-IDENTITY    

h3cDHCPRMibObject 1.3.6.1.4.1.2011.10.2.58.1
OBJECT IDENTIFIER    

h3cDHCPRIfSelectTable 1.3.6.1.4.1.2011.10.2.58.1.1
A table for configuring relay mode for interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDHCPRIfSelectEntry

h3cDHCPRIfSelectEntry 1.3.6.1.4.1.2011.10.2.58.1.1.1
An entry for configuring relay mode for an interface.
OBJECT-TYPE    
  H3cDHCPRIfSelectEntry  

h3cDHCPRIfSelectRelayMode 1.3.6.1.4.1.2011.10.2.58.1.1.1.1
If the value is on, the DHCP relay function would be enabled on this interface.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

h3cDHCPRIpToGroupTable 1.3.6.1.4.1.2011.10.2.58.1.2
A table for configuring ip addresses for DHCP server groups.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDHCPRIpToGroupEntry

h3cDHCPRIpToGroupEntry 1.3.6.1.4.1.2011.10.2.58.1.2.1
An entry for configuring ip addresses for a DHCP server group.
OBJECT-TYPE    
  H3cDHCPRIpToGroupEntry  

h3cDHCPRIpToGroupGroupId 1.3.6.1.4.1.2011.10.2.58.1.2.1.1
Group identifier of DHCP server group.
OBJECT-TYPE    
  Integer32 0..19  

h3cDHCPRIpToGroupServerIpType 1.3.6.1.4.1.2011.10.2.58.1.2.1.2
Ip address type of DHCP server.
OBJECT-TYPE    
  InetAddressType  

h3cDHCPRIpToGroupServerIp 1.3.6.1.4.1.2011.10.2.58.1.2.1.3
Ip address of DHCP server.
OBJECT-TYPE    
  InetAddress Size(1..64)  

h3cDHCPRIpToGroupRowStatus 1.3.6.1.4.1.2011.10.2.58.1.2.1.4
Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
OBJECT-TYPE    
  RowStatus  

h3cDHCPRIfToGroupTable 1.3.6.1.4.1.2011.10.2.58.1.3
A table for configuring DHCP server groups for interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDHCPRIfToGroupEntry

h3cDHCPRIfToGroupEntry 1.3.6.1.4.1.2011.10.2.58.1.3.1
An entry for configuring DHCP server group for an interface.
OBJECT-TYPE    
  H3cDHCPRIfToGroupEntry  

h3cDHCPRIfToGroupGroupId 1.3.6.1.4.1.2011.10.2.58.1.3.1.1
The DHCP server group for this interface.
OBJECT-TYPE    
  Integer32 0..19  

h3cDHCPRIfToGroupRowStatus 1.3.6.1.4.1.2011.10.2.58.1.3.1.2
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
OBJECT-TYPE    
  RowStatus  

h3cDHCPRAddrCheckTable 1.3.6.1.4.1.2011.10.2.58.1.4
A table containing the states of dhcp security address check switchs for interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDHCPRAddrCheckEntry

h3cDHCPRAddrCheckEntry 1.3.6.1.4.1.2011.10.2.58.1.4.1
An entry containing the state of dhcp security address check switch for an interface.
OBJECT-TYPE    
  H3cDHCPRAddrCheckEntry  

h3cDHCPRAddrCheckSwitch 1.3.6.1.4.1.2011.10.2.58.1.4.1.1
The state of dhcp security address check switch for this interface. It has two defined values: enabled and disabled. If the value is enabled, the address check function would be enabled. The default value is disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

h3cDHCPRSecurityTable 1.3.6.1.4.1.2011.10.2.58.1.5
A table containing the information of DHCP security.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDHCPRSecurityEntry

h3cDHCPRSecurityEntry 1.3.6.1.4.1.2011.10.2.58.1.5.1
An entry containing the information of DHCP security.
OBJECT-TYPE    
  H3cDHCPRSecurityEntry  

h3cDHCPRSecurityClientIpAddrType 1.3.6.1.4.1.2011.10.2.58.1.5.1.1
DHCP client's net ip address type
OBJECT-TYPE    
  InetAddressType  

h3cDHCPRSecurityClientIpAddr 1.3.6.1.4.1.2011.10.2.58.1.5.1.2
DHCP client's net ip address
OBJECT-TYPE    
  InetAddress Size(1..64)  

h3cDHCPRSecurityClientMacAddr 1.3.6.1.4.1.2011.10.2.58.1.5.1.3
DHCP client's mac address
OBJECT-TYPE    
  MacAddress  

h3cDHCPRSecurityClientProperty 1.3.6.1.4.1.2011.10.2.58.1.5.1.4
Property of client address
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

h3cDHCPRSecurityClientRowStatus 1.3.6.1.4.1.2011.10.2.58.1.5.1.5
Operation status of this table entry. Three actions are used: active, createAndGo, destroy
OBJECT-TYPE    
  RowStatus  

h3cDHCPRStatisticsGroup 1.3.6.1.4.1.2011.10.2.58.1.6
OBJECT IDENTIFIER    

h3cDHCPRRxClientPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.1
The total number of the packets received from DHCP clients by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRTxClientPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.2
The total number of the brodcast packets transmitted to DHCP clients by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRRxServerPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.3
The total number of the packets received from DHCP Servers by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRTxServerPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.4
The total number of the packets transmitted to DHCP Servers by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRDiscoverPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.5
The total number of the DHCP Discover packets handled by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRRequestPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.6
The total number of the DHCP Request packets handled by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRDeclinePktNum 1.3.6.1.4.1.2011.10.2.58.1.6.7
The total number of the DHCP Decline packets handled by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRReleasePktNum 1.3.6.1.4.1.2011.10.2.58.1.6.8
The total number of the DHCP Release packets handled by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRInformPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.9
The total number of the DHCP Inform packets handled by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPROfferPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.10
The total number of the DHCP Offer packets handled by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRAckPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.11
The total number of the DHCP Ack packets handled by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRNakPktNum 1.3.6.1.4.1.2011.10.2.58.1.6.12
The total number of the DHCP Nak packets handled by DHCP relay.
OBJECT-TYPE    
  Unsigned32  

h3cDHCPRStatisticsReset 1.3.6.1.4.1.2011.10.2.58.1.6.13
This node only supports set operation. If the value is true,it will clear all of the packet statistics.
OBJECT-TYPE    
  TruthValue  

h3cDHCPRCycleGroup 1.3.6.1.4.1.2011.10.2.58.1.7
OBJECT IDENTIFIER    

h3cDHCPRCycleStatus 1.3.6.1.4.1.2011.10.2.58.1.7.1
If the value is on, the cycle function would be enabled.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

h3cDHCPRConfigOption82Group 1.3.6.1.4.1.2011.10.2.58.1.8
OBJECT IDENTIFIER    

h3cDHCPROption82Switch 1.3.6.1.4.1.2011.10.2.58.1.8.1
If the value is enabled, DHCP relay supporting option 82 function would be enabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

h3cDHCPROption82HandleStrategy 1.3.6.1.4.1.2011.10.2.58.1.8.2
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
OBJECT-TYPE    
  INTEGER drop(1), keep(2), replace(3)  

h3cDHCPRConfigOption82IfTable 1.3.6.1.4.1.2011.10.2.58.1.8.3
A table containing the information of DHCP option 82. This table depends on h3cDHCPRIfToGroupTable. An entry of this table will be created when an entry of h3cDHCPRIfToGroupTable is created.
OBJECT-TYPE    
  SEQUENCE OF  
    H3cDHCPRConfigOption82IfEntry

h3cDHCPRConfigOption82IfEntry 1.3.6.1.4.1.2011.10.2.58.1.8.3.1
An entry containing the information of DHCP option 82.
OBJECT-TYPE    
  H3cDHCPRConfigOption82IfEntry  

h3cDHCPROption82IfSwitch 1.3.6.1.4.1.2011.10.2.58.1.8.3.1.1
If DHCP relay supports option 82 functions, the value is 'enabled'. If DHCP relay does not support option 82 functions, the value is 'disabled'.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

h3cDHCPROption82IfStrategy 1.3.6.1.4.1.2011.10.2.58.1.8.3.1.2
The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
OBJECT-TYPE    
  INTEGER drop(1), keep(2), replace(3)  

h3cDHCPROption82IfFormat 1.3.6.1.4.1.2011.10.2.58.1.8.3.1.3
The format of DHCP relay option 82. 'normal' is the standard format. 'verbose' is the detailed format.
OBJECT-TYPE    
  INTEGER normal(1), verbose(2)  

h3cDHCPROption82IfNodeType 1.3.6.1.4.1.2011.10.2.58.1.8.3.1.4
Property of DHCP relay option 82 verbose format. The value can be set by user only when the value of h3cDHCPROption82IfFormat is set with 'verbose'. If the value of h3cDHCPROption82IfFormat is 'normal', the value is automatically set with 'invalid'. the value can not be set with 'invalid' by user. 'mac' indicates the option 82 verbose format is filled in with the mac of DHCP relay input interface. If the value of h3cDHCPROption82IfFormat is set with 'verbose', the value is automatically set with 'mac'. 'sysname' indicates the option 82 verbose format is filled in with the name of the DHCP relay. 'userdefine' indicates the option 82 verbose format is filled in with the string defined by user. If the value is set with 'userdefine', the value of h3cDHCPROption82IfUsrDefString must be set simultaneously.
OBJECT-TYPE    
  INTEGER invalid(1), mac(2), sysname(3), userdefine(4)  

h3cDHCPROption82IfUsrDefString 1.3.6.1.4.1.2011.10.2.58.1.8.3.1.5
The string defined by user to fill in the option 82 verbose format. If the value of h3cDHCPROption82IfFormat is 'normal', or the value of h3cDHCPROption82IfNodeType is 'mac' or 'sysname', it is set with a null string automatically and can not be modified by user. It must be set with a non-zero length string when the value of h3cDHCPROption82IfNodeType is set with 'userdefine'.
OBJECT-TYPE    
  STRING Size(0..256)