H3C-CATV-TRANSCEIVER-MIB

File: H3C-CATV-TRANSCEIVER-MIB.mib (6371 bytes)

Imported modules

HUAWEI-3COM-OID-MIB SNMPv2-SMI

Imported symbols

h3cCommon Integer32 OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE

Defined Values

h3cCATVTransceiver 1.3.6.1.4.1.2011.10.2.94
The objects in this MIB module are used to manage and display common configuration for CATV(Community Antenna Television) transceiver module.
MODULE-IDENTITY    

h3cCATVTransStatus 1.3.6.1.4.1.2011.10.2.94.1
OBJECT IDENTIFIER    

h3cCATVTransStatusScalarObjects 1.3.6.1.4.1.2011.10.2.94.1.1
OBJECT IDENTIFIER    

h3cCATVTransState 1.3.6.1.4.1.2011.10.2.94.1.1.1
The state of CATV transceiver.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

h3cCATVTransInputPwr 1.3.6.1.4.1.2011.10.2.94.1.1.2
The input power of CATV transceiver. If transceiver is not on site, the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cCATVTransOutputLevel 1.3.6.1.4.1.2011.10.2.94.1.1.3
The output level of CATV transceiver. If transceiver is not on site, the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cCATVTransTemperature 1.3.6.1.4.1.2011.10.2.94.1.1.4
The temperature of CATV transceiver. If transceiver is not on site, the value should be zero.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

h3cCATVTransceiverMan 1.3.6.1.4.1.2011.10.2.94.2
OBJECT IDENTIFIER    

h3cCATVTransCtrlScalarObjects 1.3.6.1.4.1.2011.10.2.94.2.1
OBJECT IDENTIFIER    

h3cCATVTransInputPwrLowerThr 1.3.6.1.4.1.2011.10.2.94.2.1.1
A threshold for the CATV transceiver's input power. When the input power of CATV transceiver is lower than threshold, a trap should be generated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cCATVTransOutputLvlLowerThr 1.3.6.1.4.1.2011.10.2.94.2.1.2
A threshold for the CATV transceiver's output level. When the output level of CATV transceiver is lower than threshold, a trap should be generated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cCATVTransTempratureUpperThr 1.3.6.1.4.1.2011.10.2.94.2.1.3
A threshold for the CATV transceiver's temperature. When the temperature of CATV transceiver is higher than threshold, a trap should be generated.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

h3cCATVTansTrap 1.3.6.1.4.1.2011.10.2.94.3
OBJECT IDENTIFIER    

h3cCATVTransTrapPrefix 1.3.6.1.4.1.2011.10.2.94.3.0
OBJECT IDENTIFIER    

h3cCATVTransInputPwrTrap 1.3.6.1.4.1.2011.10.2.94.3.0.1
A h3cCATVTransInputPwrTrap notification is sent when the input power of CATV transceiver is lower than the threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

h3cCATVTransInputPwrReTrap 1.3.6.1.4.1.2011.10.2.94.3.0.2
A h3cCATVTransInputPwrReTrap notification is sent when the input power of CATV transceiver recovered from the last trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

h3cCATVTransOutputLvlTrap 1.3.6.1.4.1.2011.10.2.94.3.0.3
A h3cCATVTransOutputLvlTrap notification is sent when the output level of CATV transceiver is lower than the threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

h3cCATVTransOutputLvlReTrap 1.3.6.1.4.1.2011.10.2.94.3.0.4
A h3cCATVTransOutputLvlReTrap notification is sent when the output level of CATV transceiver recovered from the last trap.
Status: current Access: read-write
NOTIFICATION-TYPE    

h3cCATVTransTemperatureTrap 1.3.6.1.4.1.2011.10.2.94.3.0.5
A h3cCATVTransTemperatureTrap notification is sent when the temperature of CATV transceiver is higher than the threshold.
Status: current Access: read-write
NOTIFICATION-TYPE    

h3cCATVTransTemperatureReTrap 1.3.6.1.4.1.2011.10.2.94.3.0.6
A h3cCATVTransTemperatureReTrap notification is sent when the temperature of CATV transceiver recovered from the last trap.
Status: current Access: read-write
NOTIFICATION-TYPE