H245-MIB

File: H245-MIB.mib (96935 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB MULTI-MEDIA-MIB-TC

Imported symbols

Counter32 Integer32 OBJECT-TYPE
MODULE-IDENTITY DisplayString TAddress
TruthValue MODULE-COMPLIANCE OBJECT-GROUP
ifIndex MmTAddressTag mmH245Root
MmH323EndpointType

Defined Types

H245ConfigurationTableEntry  
SEQUENCE    
  h245ConfigT101Timer Integer32
  h245ConfigT102Timer Integer32
  h245ConfigT103Timer Integer32
  h245ConfigT104Timer Integer32
  h245ConfigT105Timer Integer32
  h245ConfigT106Timer Integer32
  h245ConfigT107Timer Integer32
  h245ConfigT108Timer Integer32
  h245ConfigT109Timer Integer32
  h245ConfigN100Counter Integer32

H245ControlChannelStatsTableEntry  
SEQUENCE    
  h245ControlChannelNumberOfListenPorts Integer32
  h245ControlChannelMaxConnections Integer32
  h245ControlChannelNumberOfListenFails Integer32
  h245ControlChannelNumberOfActiveConnections Integer32
  h245ControlChannelMasterSlaveMaxRetries Integer32
  h245ControlChannelConnectionAttemptsFail Counter32
  h245ControlChanneMasterSlavelDeterminations Counter32
  h245ControlChannelMasterSlaveAcks Counter32
  h245ControlChannelMasterSlaveRejects Counter32
  h245ControlChannelMasterSlaveT106Rejects Counter32
  h245ControlChannelMasterSlaveMSDRejects Counter32
  h245ControlChannelNumberOfMasterSlaveInconsistentFieldRejects Counter32
  h245ControlChannelMasterSlaveMaxCounterRejects Counter32
  h245ControlChannelMasterSlaveReleases Counter32
  h245ControlChannelNumberOfTunnels Integer32

H245ControlChannelMasterSlaveTableEntry  
SEQUENCE    
  h245ControlChannelSrcAddressTag MmTAddressTag
  h245ControlChannelSrcTransporTAddress TAddress
  h245ControlChannelDesTAddressTag MmTAddressTag
  h245ControlChannelDestTransporTAddress TAddress
  h245ControlChannelIndex Integer32
  h245ControlChannelMSDState INTEGER
  h245ControlChannelTerminalType MmH323EndpointType
  h245ControlChannelNumberOfMSDRetries Integer32
  h245ControlChannelIsTunneling TruthValue

H245CapExchangeStatsTableEntry  
SEQUENCE    
  h245CapExchangeSets Counter32
  h245CapExchangeAcks Counter32
  h245CapExchangeRejects Counter32
  h245CapExchangeRejectUnspecified Counter32
  h245CapExchangeRejectUndefinedTableEntryUsed Counter32
  h245CapExchangeRejectDescriptorCapacityExceeded Counter32
  h245CapExchangeRejectTableEntryCapacityExeeded Counter32
  h245CapExchangeReleases Counter32

H245CapExchangeCapabilityTableEntry  
SEQUENCE    
  h245CapExchangeDirection INTEGER
  h245CapExchangeState INTEGER
  h245CapExchangeProtocolId OCTET STRING
  h245CapExchangeRejectCause INTEGER
  h245CapExchangeMultiplexCapability DisplayString
  h245CapExchangeCapability DisplayString
  h245CapExchangeCapabilityDescriptors DisplayString

H245LogChannelsChannelTableEntry  
SEQUENCE    
  h245LogChannelsChannelNumber Integer32
  h245LogChannelsChannelDirection INTEGER
  h245LogChannelsIndex Integer32
  h245LogChannelsChannelState INTEGER
  h245LogChannelsMediaTableType INTEGER

H245LogChannelsH225TableEntry  
SEQUENCE    
  h245LogChannelsSessionId Integer32
  h245LogChannelsAssociateSessionId Integer32
  h245LogChannelsMediaChannel TAddress
  h245LogChannelsMediaGuaranteedDelivery TruthValue
  h245LogChannelsMediaControlChannel TAddress
  h245LogChannelsMediaControlGuaranteedDelivery TruthValue
  h245LogChannelsSilenceSuppression TruthValue
  h245LogChannelsDestination OCTET STRING
  h245LogChannelsDynamicRTPPayloadType Integer32
  h245LogChannelsH261aVideoPacketization TruthValue
  h245LogChannelsRTPPayloadDescriptor OCTET STRING
  h245LogChannelsRTPPayloadType Integer32
  h245LogChannelsTransportCapability DisplayString
  h245LogChannelsRedundancyEncoding DisplayString
  h245LogChannelsSrcTerminalLabel OCTET STRING

H245LogChannelOpenLogicalChannelTableEntry  
SEQUENCE    
  h245LogChanOpenLogChanTotalRequests Counter32
  h245LogChanOpenLogChanAcks Counter32
  h245LogChanOpenLogChanConfirms Counter32
  h245LogChanOpenLogChanRejects Counter32
  h245LogChanOpenLogChanRejectUnspecified Counter32
  h245LogChanOpenLogChanRejectUnsuitableReverseParameters Counter32
  h245LogChanOpenLogChanRejectDataTypeNotSupported Counter32
  h245LogChanOpenLogChanRejectDataTypeNotAvailable Counter32
  h245LogChanOpenLogChanRejectUnknownDataType Counter32
  h245LogChanOpenLogChanRejectDataTypeALCombinationNotSupported Counter32
  h245LogChanOpenLogChanRejectMulticastChannelNotAllowed Counter32
  h245LogChanOpenLogChanRejectInsuffientBandwdith Counter32
  h245LogChanOpenLogChanRejectSeparateStackEstablishmentFailed Counter32
  h245LogChanOpenLogChanRejectInvalidSessionID Counter32
  h245LogChanOpenLogChanRejectMasterSlaveConflict Counter32
  h245LogChanOpenLogChanRejectWaitForCommunicationMode Counter32
  h245LogChanOpenLogChanRejectInvalidDependentChannel Counter32
  h245LogChansOpenLogChanRejectReplacementForRejected Counter32

H245LogChannelCloseLogicalChannelTableEntry  
SEQUENCE    
  h245LogChanCloseLogChannels Counter32
  h245LogChanCloseLogChanAcks Counter32
  h245LogChanCloseLogChanRequests Counter32
  h245LogChanCloseLogChanRequestsAcks Counter32
  h245LogChanCloseLogChanRequestRejects Counter32
  h245LogChanCloseLogChanRequestReleases Counter32

H245MiscRoundTripDelayTableEntry  
SEQUENCE    
  h245MiscRTDState INTEGER
  h245MiscT105TimerExpired TruthValue
  h245MiscLastRTDRequestSent Integer32
  h245MiscLastRTDRequestRcvd Integer32
  h245MiscLastRTDResponseSent Integer32
  h245MiscLastRTDResponseRcvd Integer32

H245MiscMaintenanceLoopTableEntry  
SEQUENCE    
  h245MiscMaintenanceLoopDirection INTEGER
  h245MiscMLState INTEGER
  h245MiscNumberOfRequests Counter32
  h245MiscNumberOfAcks Counter32
  h245MiscLastMLRequestOrAckType INTEGER
  h245MiscMLMediaOrLogicalChannelLoopRejectChannelNumber Integer32
  h245MiscNumberOfRejects Counter32
  h245MiscLastRejectType INTEGER
  h245MiscErrorCode INTEGER

H245ConferenceTerminalTableEntry  
SEQUENCE    
  h245ConferenceConferenceId OCTET STRING Size(1..32)
  h245ConferenceTerminalLabel OCTET STRING
  h245ConferenceControlChannelIndex Integer32
  h245ConferenceBroadcaster TruthValue
  h245ConferenceConferenceChair TruthValue
  h245ConferenceMultipoint TruthValue

H245ConferenceStatsTableEntry  
SEQUENCE    
  h245ConferenceBroadcastMyLogicalChannel Counter32
  h245ConferenceCancelBroadcastMyLogicalChannel Counter32
  h245ConferenceSendThisSource Counter32
  h245ConferenceCancelSendThisSource Counter32
  h245ConferenceDropConference Counter32
  h245ConferenceEqualiseDelay Counter32
  h245ConferenceZeroDelay Counter32
  h245ConferenceMultipointModeCommand Counter32
  h245ConferenceCancelMultipointModeCommand Counter32
  h245ConferenceVideoFreezePicture Counter32
  h245ConferenceVideoFastUpdatePicture Counter32
  h245ConferenceVideoFastUpdateGOB Counter32
  h245ConferenceVideoTemporalSpatialTradeOff Counter32
  h245ConferenceVideoSendSyncEveryGOB Counter32
  h245ConferenceVideoFastUpdateMB Counter32

Defined Values

h245 0.0.8.341.1.3.1
MODULE-IDENTITY    

h245Configuration 0.0.8.341.1.3.1.1
OBJECT IDENTIFIER    

h245ControlChannel 0.0.8.341.1.3.1.2
OBJECT IDENTIFIER    

h245CapExchange 0.0.8.341.1.3.1.3
OBJECT IDENTIFIER    

h245LogChannels 0.0.8.341.1.3.1.4
OBJECT IDENTIFIER    

h245Conference 0.0.8.341.1.3.1.5
OBJECT IDENTIFIER    

h245Misc 0.0.8.341.1.3.1.6
OBJECT IDENTIFIER    

h245MIBConformance 0.0.8.341.1.3.1.7
OBJECT IDENTIFIER    

h245ConfigurationTable 0.0.8.341.1.3.1.1.1
This table contains information about H.245 configuration parameters. It is a list of configuration parameter entries. The number of entries equals to the number of H.245 stacks in a system.
OBJECT-TYPE    
  SEQUENCE OF  
    H245ConfigurationTableEntry

h245ConfigurationTableEntry 0.0.8.341.1.3.1.1.1.1
It contains objects that describe the H.245 configuration parameters.
OBJECT-TYPE    
  H245ConfigurationTableEntry  

h245ConfigT101Timer 0.0.8.341.1.3.1.1.1.1.1
This timer is used during Capability Exchange procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no TerminalCapabilitySetAck or TerminalCapabilitySetReject message may be received.
OBJECT-TYPE    
  Integer32  

h245ConfigT102Timer 0.0.8.341.1.3.1.1.1.1.2
This timer is used during Maintenance Loop procedure. This timer is used during the AWAITING RESPONSE state. It specifies the maximum allowed time during which no MaintenanceLoopAck or MaintenanceLoopReject message may be received .
OBJECT-TYPE    
  Integer32  

h245ConfigT103Timer 0.0.8.341.1.3.1.1.1.1.3
This timer is used during Uni-directional and Bi-directional Logical Channel Signalling procedure. This timer is used in the AWAITING ESTABLISHMENT and AWAITING RELEASE states. It specifies the maximum time during which no OpenLogicalChannelAck or OpenLogicalChannelReject or CloseLogicalChannelAck message may be received.
OBJECT-TYPE    
  Integer32  

h245ConfigT104Timer 0.0.8.341.1.3.1.1.1.1.4
This timer is used during H.223 Multiplex Table procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no MultiplexEntrySendAck or MultiplexEntrySendReject message may be received.
OBJECT-TYPE    
  Integer32  

h245ConfigT105Timer 0.0.8.341.1.3.1.1.1.1.5
This timer is used during Round Trip Delay procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no RoundTripDelayResponse message may be received.
OBJECT-TYPE    
  Integer32  

h245ConfigT106Timer 0.0.8.341.1.3.1.1.1.1.6
This timer is used during Master Slave Determination procedure. This timer is used in the OUTGOING AWAITING RESPONSE state and during the INCOMING AWAITING RESPONSE state. It specifies the maximum time during which no acknowledgement message may be received.
OBJECT-TYPE    
  Integer32  

h245ConfigT107Timer 0.0.8.341.1.3.1.1.1.1.7
This timer is used during Request Multiplex Entry procedure. This timer is used during the AWAITING RESPONSE state. It specifies the maximum time during which no RequestMultiplexEntryAck or RequestMultiplexEntryReject message may be received.
OBJECT-TYPE    
  Integer32  

h245ConfigT108Timer 0.0.8.341.1.3.1.1.1.1.8
This timer is used during SEND Logical Channel procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no RequestMultiplexEntryAck or RequestMultiplexEntryReject message may be received.
OBJECT-TYPE    
  Integer32  

h245ConfigT109Timer 0.0.8.341.1.3.1.1.1.1.9
This timer is used during Mode Request procedure. This timer is used in the AWAITING RESPONSE state. It specifies the maximum time during which no RequestModeAck or RequestModeReject message may be received.
OBJECT-TYPE    
  Integer32  

h245ConfigN100Counter 0.0.8.341.1.3.1.1.1.1.10
This counter specifies the maximum number of times that MasterSlaveDetermination messages will be sent during the OUTGOING AWAITING RESPONSE state.
OBJECT-TYPE    
  Integer32  

h245ControlChannelStatsTable 0.0.8.341.1.3.1.2.1
This table contains information about H.245 statistics. It is a list of statistics entries. The number of entries equals to the number of control channels for all H.245 stacks in a system.
OBJECT-TYPE    
  SEQUENCE OF  
    H245ControlChannelStatsTableEntry

h245ControlChannelStatsTableEntry 0.0.8.341.1.3.1.2.1.1
It contains objects that describe the H.245 control channel statistics.
OBJECT-TYPE    
  H245ControlChannelStatsTableEntry  

h245ControlChannelNumberOfListenPorts 0.0.8.341.1.3.1.2.1.1.1
The number of H245 Listen ports. These ports are used for the remote entity to send a connect on
OBJECT-TYPE    
  Integer32  

h245ControlChannelMaxConnections 0.0.8.341.1.3.1.2.1.1.2
The number of maximum active h245 channels allowed.
OBJECT-TYPE    
  Integer32  

h245ControlChannelNumberOfListenFails 0.0.8.341.1.3.1.2.1.1.3
The number of Listen fails. The fail could be due to exhaustion of system resources
OBJECT-TYPE    
  Integer32  

h245ControlChannelNumberOfActiveConnections 0.0.8.341.1.3.1.2.1.1.4
The number of the active H245 connections.
OBJECT-TYPE    
  Integer32  

h245ControlChannelMasterSlaveMaxRetries 0.0.8.341.1.3.1.2.1.1.5
The number of maximum master slave retries. Reties are needed when the result of master slave process is indeterminate
OBJECT-TYPE    
  Integer32  

h245ControlChannelConnectionAttemptsFail 0.0.8.341.1.3.1.2.1.1.6
The number of failures when trying to connect to a listen port.
OBJECT-TYPE    
  Counter32  

h245ControlChanneMasterSlavelDeterminations 0.0.8.341.1.3.1.2.1.1.7
The number of MSD messages sent from a MSDSE to a peer MSDSE for master/slave determination purpose.
OBJECT-TYPE    
  Counter32  

h245ControlChannelMasterSlaveAcks 0.0.8.341.1.3.1.2.1.1.8
The number of acks that are used to confirm whether the terminal is the master terminal or the slave terminal, as indicated by decision. When decision is of type master, the terminal receiving this message is the master terminal and when decision is of type slave, it is the slave terminal.
OBJECT-TYPE    
  Counter32  

h245ControlChannelMasterSlaveRejects 0.0.8.341.1.3.1.2.1.1.9
The number of rejects of the MasterSlaveDetermination message.
OBJECT-TYPE    
  Counter32  

h245ControlChannelMasterSlaveT106Rejects 0.0.8.341.1.3.1.2.1.1.10
The number of rejects of the MasterSlaveDetermination message. When the cause is of type identicalNumbers, the rejection was due to the random numbers being equivalent and the terminal types being the same.
OBJECT-TYPE    
  Counter32  

h245ControlChannelMasterSlaveMSDRejects 0.0.8.341.1.3.1.2.1.1.11
The number of MSD rejects of the MasterSlaveDetermination message. Rejects can happen due to different reasons like identical random number after maximum tries, timeouts...
OBJECT-TYPE    
  Counter32  

h245ControlChannelNumberOfMasterSlaveInconsistentFieldRejects 0.0.8.341.1.3.1.2.1.1.12
The number of rejects of the MasterSlaveDetermination message. The cause is due to conflict in the status that both entities arrive to.
OBJECT-TYPE    
  Counter32  

h245ControlChannelMasterSlaveMaxCounterRejects 0.0.8.341.1.3.1.2.1.1.13
The number of rejects of the MasterSlaveDetermination message. There are many reasons why the rejection could happen.
OBJECT-TYPE    
  Counter32  

h245ControlChannelMasterSlaveReleases 0.0.8.341.1.3.1.2.1.1.14
The number of rejects due to a time out.
OBJECT-TYPE    
  Counter32  

h245ControlChannelNumberOfTunnels 0.0.8.341.1.3.1.2.1.1.15
The number of the active H245 tunnels.
OBJECT-TYPE    
  Integer32  

h245ControlChannelMasterSlaveTable 0.0.8.341.1.3.1.2.2
This table contains information about entities that are connected to this entity. It is a list of connection entries. The number of entries equals to the number of active connections.
OBJECT-TYPE    
  SEQUENCE OF  
    H245ControlChannelMasterSlaveTableEntry

h245ControlChannelMasterSlaveTableEntry 0.0.8.341.1.3.1.2.2.1
It contains objects that describe the status of the master slave determination procedure.
OBJECT-TYPE    
  H245ControlChannelMasterSlaveTableEntry  

h245ControlChannelSrcAddressTag 0.0.8.341.1.3.1.2.2.1.1
It describes the type of address (IP v4, IPv6...) of the source
OBJECT-TYPE    
  MmTAddressTag  

h245ControlChannelSrcTransporTAddress 0.0.8.341.1.3.1.2.2.1.2
Source transport address.
OBJECT-TYPE    
  TAddress  

h245ControlChannelDesTAddressTag 0.0.8.341.1.3.1.2.2.1.3
It describes the type of address (IP v4, IPv6...) of the source
OBJECT-TYPE    
  MmTAddressTag  

h245ControlChannelDestTransporTAddress 0.0.8.341.1.3.1.2.2.1.4
Remote transport address.
OBJECT-TYPE    
  TAddress  

h245ControlChannelIndex 0.0.8.341.1.3.1.2.2.1.5
It is an arbitrary number that is being incremented by 1 for every entry in this table
OBJECT-TYPE    
  Integer32  

h245ControlChannelMSDState 0.0.8.341.1.3.1.2.2.1.6
It describes the state of the master slave determination procdure. It can be OUTGOING WAITING RESPONSE, INCOMING WAITING RESPONSE, IDLE
OBJECT-TYPE    
  INTEGER outgoingWaitingResponse(1), incomingWaitingResponse(2), idle(3), master(4), slave(5)  

h245ControlChannelTerminalType 0.0.8.341.1.3.1.2.2.1.7
Terminal type represents the type of H.323 terminal: 50 - terminal without MC 60 - gateway without MC 70 - terminal with MC but without MP 80 - gateway with MC but without MP 120 - gatekeeper with MC but without MP 160 - MCU with MC but without MP 90 - gateway with MC and Data MP 130 - gatekeeper with MC and Data MP 170 - MCU with MC and Data MP 100 - gateway containing MC with Data and audio MP 140 - gatekeeper containing MC with Data and audio MP 180 - MCU containing MC with Data and audio MP 110 - gateway containing MC with Data, Audio and Video MP 150 - gatekeeper containing MC with Data, Audio and Video MP 190 - MCU containing MC with Data, Audio and Video MP 240 - entity with active MC .
OBJECT-TYPE    
  MmH323EndpointType  

h245ControlChannelNumberOfMSDRetries 0.0.8.341.1.3.1.2.2.1.8
The number of tries of master slave determination before a meaningful result is concluded.
OBJECT-TYPE    
  Integer32  

h245ControlChannelIsTunneling 0.0.8.341.1.3.1.2.2.1.9
This variable indicates if tunneling is used for this channel.
OBJECT-TYPE    
  TruthValue  

h245CapExchangeStatsTable 0.0.8.341.1.3.1.3.1
This table contains information about H.245 statistics for capabilities exchange procedure. It is a list of cap exchange statistics entries. The number of entries equals to the number of H.245 stacks in a system.
OBJECT-TYPE    
  SEQUENCE OF  
    H245CapExchangeStatsTableEntry

h245CapExchangeStatsTableEntry 0.0.8.341.1.3.1.3.1.1
It contains objects that describe statistics for H.245 cap exchange procedure.
OBJECT-TYPE    
  H245CapExchangeStatsTableEntry  

h245CapExchangeSets 0.0.8.341.1.3.1.3.1.1.1
The total number of TerminalCapabilitySets that were sent and received by the local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySet is used for the intention to signal a terminal's capabilities to ensure that the only multimedia signals to be transmitted are those that can be received and treated appropriately by the receive terminal.
OBJECT-TYPE    
  Counter32  

h245CapExchangeAcks 0.0.8.341.1.3.1.3.1.1.2
The total number of TerminalCapabilitySetAcks that were sent and received by local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySetAck is used as a confirmation for a TerminalCapabilitySet that was successfully received and processed.
OBJECT-TYPE    
  Counter32  

h245CapExchangeRejects 0.0.8.341.1.3.1.3.1.1.3
The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity). A TerminalCapabilitySetReject is used to indicate a failure due to a specific error for a TerminalCapabilitySet that was received, but, yet to be fully processed.
OBJECT-TYPE    
  Counter32  

h245CapExchangeRejectUnspecified 0.0.8.341.1.3.1.3.1.1.4
The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set to unspecified. This means that there was no cause for the rejection of a TerminalCapabilitySet specified.
OBJECT-TYPE    
  Counter32  

h245CapExchangeRejectUndefinedTableEntryUsed 0.0.8.341.1.3.1.3.1.1.5
The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set to undefinedTableEntryUsed. This means that the cause of the rejection of a TerminalCapabilitySet was due to a capability descriptor made reference to a capability table entry number in the capability table of the TerminalCapabilitySet was not defined.
OBJECT-TYPE    
  Counter32  

h245CapExchangeRejectDescriptorCapacityExceeded 0.0.8.341.1.3.1.3.1.1.6
The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set to descriptorCapacityExceeded. This means that the cause of the rejection of a TerminalCapabilitySet was due to a terminal incapable of storing all of the information from the capabilityDescriptors of the TerminalCapabilitySet.
OBJECT-TYPE    
  Counter32  

h245CapExchangeRejectTableEntryCapacityExeeded 0.0.8.341.1.3.1.3.1.1.7
The total number of TerminalCapabilitySetRejects that were sent and received by the local CESE (Capability Exchange Signalling Entity) with the cause value set to tableEntryCapacityExceeded. This means that the cause of the rejection of a TerminalCapabilitySet was due to a terminal incapable of storing some (indicated in the highestEntryNumberProcessed) or all (indicated in the noneProcessed) of the information from the capability table of the TerminalCapabilitySet.
OBJECT-TYPE    
  Counter32  

h245CapExchangeReleases 0.0.8.341.1.3.1.3.1.1.8
The total number of TerminalCapabilitySetReleases that were sent and received by the local CESE (Capability Exchange Signalling Entity). This means that a response for a TerminalCapabilitySet was not received/issued in time. A timer expiry had occurred for the local CESE.
OBJECT-TYPE    
  Counter32  

h245CapExchangeCapabilityTable 0.0.8.341.1.3.1.3.2
Contains all the local incoming and outgoing CESEs (Capability Exchange Signalling Entity) that currently exists in this terminal.
OBJECT-TYPE    
  SEQUENCE OF  
    H245CapExchangeCapabilityTableEntry

h245CapExchangeCapabilityTableEntry 0.0.8.341.1.3.1.3.2.1
Each entry contains either the local incoming or outgoing CESE (Capability Exchange Signalling Entity) that is derived from a particular H.245 Control Channel, Logical Channel 0, or H.245 session.
OBJECT-TYPE    
  H245CapExchangeCapabilityTableEntry  

h245CapExchangeDirection 0.0.8.341.1.3.1.3.2.1.1
Represents either the local incoming CESE or the local outgoing CESE (Capability Exchange Signalling Entity).
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2)  

h245CapExchangeState 0.0.8.341.1.3.1.3.2.1.2
The current state of this CESE (Capability Exchange Signalling Entity).
OBJECT-TYPE    
  INTEGER sent(1), acked(2), reject(3), release(4)  

h245CapExchangeProtocolId 0.0.8.341.1.3.1.3.2.1.3
The version of the H.245 protocol used. This specifies how H.245 messages are formatted and used.
OBJECT-TYPE    
  OCTET STRING Size(1..128)  

h245CapExchangeRejectCause 0.0.8.341.1.3.1.3.2.1.4
The latest reject cause value extracted from the latest TerminalCapabilitySetReject.
OBJECT-TYPE    
  INTEGER unspecified(1), undefinedTableEntryUsed(2), descriptorCapacityExceeded(3), tableEntryCapacityExceeded(4)  

h245CapExchangeMultiplexCapability 0.0.8.341.1.3.1.3.2.1.5
The latest multiplexCapability extracted from a TerminalCapabilitySet.
OBJECT-TYPE    
  DisplayString  

h245CapExchangeCapability 0.0.8.341.1.3.1.3.2.1.6
The latest capabilityTable extracted from the latest TerminalCapabilitySet.
OBJECT-TYPE    
  DisplayString  

h245CapExchangeCapabilityDescriptors 0.0.8.341.1.3.1.3.2.1.7
The latest capabilityDescriptors extracted from the latest TerminalCapabilitySet.
OBJECT-TYPE    
  DisplayString  

h245LogChannelsChannelTable 0.0.8.341.1.3.1.4.1
Contains all the local incoming and outgoing LCSEs (Uni or Bi-directional Logical Channel Signalling Entity) that currently exist in this terminal with their logical channels open or in the process of being opened or closed.
OBJECT-TYPE    
  SEQUENCE OF  
    H245LogChannelsChannelTableEntry

h245LogChannelsChannelTableEntry 0.0.8.341.1.3.1.4.1.1
Each entry contains either the local incoming or outgoing LCSE (Uni or Bi-directional Logical Channel Signalling Entity) that is derived from a particular H.245 Control Channel, Logical Channel 0, or H.245 session with its logical channels that are currently open or in the process of being opened or closed.
OBJECT-TYPE    
  H245LogChannelsChannelTableEntry  

h245LogChannelsChannelNumber 0.0.8.341.1.3.1.4.1.1.1
The forwardLogicalChannelNumber used to distinguish this media channel by this LCSE (Uni or Bi-directional Logical Channel Signalling Entity).
OBJECT-TYPE    
  Integer32  

h245LogChannelsChannelDirection 0.0.8.341.1.3.1.4.1.1.2
Represents the direction of this media channel used by this LCSE (Uni or Bi-directional Logical Channel Signalling Entity) .
OBJECT-TYPE    
  INTEGER receive(1), transmit(2)  

h245LogChannelsIndex 0.0.8.341.1.3.1.4.1.1.3
A unique value representing this media channel.
OBJECT-TYPE    
  Integer32  

h245LogChannelsChannelState 0.0.8.341.1.3.1.4.1.1.4
The current state of the media channel which also represents the state of this LCSE (Uni or Bi-directional Logical Channel Signalling Entity).
OBJECT-TYPE    
  INTEGER awaitingEstablishment(1), established(2), awaitingRelease(3), awaitingConfirmation(4)  

h245LogChannelsMediaTableType 0.0.8.341.1.3.1.4.1.1.5
The actual media or data type used for this logical channel.
OBJECT-TYPE    
  INTEGER nonStandard(1), videoNonStandard(2), h261VideoCapability(3), h262VideoCapability(4), h263VideoCapability(5), is11172VideoCapability(6), audioNonStandard(7), g711Alaw64k(8), g711Alaw56k(9), g711Ulaw64k(10), g711Ulaw56k(11), g722-64k(12), g722-56k(13), g722-48k(14), g7231(15), g728(16), g729(17), g729AnnexA(18), is11172AudioCapability(19), is13818AudioCapability(20), g729wAnnexB(21), g729AnnexAwAnnexB(22), g7231AnnexCCapability(23), gsmFullRate(24), gsmHalfRate(25), gsmEnhancedFullRate(26), dataNonStandard(27), t120(28), dsm-cc(29), userData(30), t84(31), t434(32), h224(33), nlpid(34), dsvdControl(35), h222DataPartitioning(36), t30fax(37), t140(38), h233EncryptionCapability(39), conferenceCapability(40), h235SecurityCapability(41), maxPendingReplacementFor(42), userInputCapability(43), h225(44), h222(45), h223(46), v76(47)  

h245LogChannelsH225Table 0.0.8.341.1.3.1.4.2
Contains the H2250LogicalChannelParameters that are used in all of the logical channels that are currently opened on this terminal.
OBJECT-TYPE    
  SEQUENCE OF  
    H245LogChannelsH225TableEntry

h245LogChannelsH225TableEntry 0.0.8.341.1.3.1.4.2.1
Each entry contains the actual specifics and options used in the H2250LogicalChannelParameters within a particular open logical channel.
OBJECT-TYPE    
  H245LogChannelsH225TableEntry  

h245LogChannelsSessionId 0.0.8.341.1.3.1.4.2.1.1
A unique RTP or T.120 Session Identifier in a conference. It is used by the transmitter to refer to the session to which the logical channel applies.
OBJECT-TYPE    
  Integer32  

h245LogChannelsAssociateSessionId 0.0.8.341.1.3.1.4.2.1.2
This is used to associate one session with another in a conference. A typical use will be to associate an audio session with a video session to indicate which sessions to process for lip synchronization.
OBJECT-TYPE    
  Integer32  

h245LogChannelsMediaChannel 0.0.8.341.1.3.1.4.2.1.3
Indicates a transporTAddress to be used for the logical channel.
OBJECT-TYPE    
  TAddress  

h245LogChannelsMediaGuaranteedDelivery 0.0.8.341.1.3.1.4.2.1.4
Indicates whether or not the underlying media transport should be selected to provide or not to provide guaranteed delivery of data.
OBJECT-TYPE    
  TruthValue  

h245LogChannelsMediaControlChannel 0.0.8.341.1.3.1.4.2.1.5
Indicates the media control channel in which the sender of the open logical channel will be listening for media control messages for this session. This field is present only when a media control channel is required.
OBJECT-TYPE    
  TAddress  

h245LogChannelsMediaControlGuaranteedDelivery 0.0.8.341.1.3.1.4.2.1.6
Indicates whether or not the underlying media control transport should be selected to provide or not to provide guaranteed delivery of data. This field is present only when a media control channel is required.
OBJECT-TYPE    
  TruthValue  

h245LogChannelsSilenceSuppression 0.0.8.341.1.3.1.4.2.1.7
Indicates whether the transmitter stops sending packets during times of silence for bandwidth reasons. This can only be enabled for an audio channel only.
OBJECT-TYPE    
  TruthValue  

h245LogChannelsDestination 0.0.8.341.1.3.1.4.2.1.8
Indicates the terminal label (composed of a mcu number and a terminal number) of the destination if one has been assigned.
OBJECT-TYPE    
  OCTET STRING Size(2)  

h245LogChannelsDynamicRTPPayloadType 0.0.8.341.1.3.1.4.2.1.9
Indicates a dynamic payload value which is used in H.323 for the H.225.0 alternative H.261 video packetization scheme. This field is present only when a dynamic RTP payload is in use.
OBJECT-TYPE    
  Integer32  

h245LogChannelsH261aVideoPacketization 0.0.8.341.1.3.1.4.2.1.10
Indicates that the H.261 alternative RTP payload form is in use as described in H.225.0.
OBJECT-TYPE    
  TruthValue  

h245LogChannelsRTPPayloadDescriptor 0.0.8.341.1.3.1.4.2.1.11
If the rfc-number is chosen, it indicates the offical document of the IETF in which the payload format is defined (OID). Obsolete RFCs should not be referenced here. If the oid component is chosen, this identifies a payload format specified as part of a Recommendation defined by the ITU or an International Standard defined by the ISO and registered in the respective document under this Object Indentifier.
OBJECT-TYPE    
  OCTET STRING Size(0..127)  

h245LogChannelsRTPPayloadType 0.0.8.341.1.3.1.4.2.1.12
Indicates which payload type value used. If the dynamic payload type is used, the values of this field and the logChannelsDynamicRTPPayloadType should match.
OBJECT-TYPE    
  Integer32  

h245LogChannelsTransportCapability 0.0.8.341.1.3.1.4.2.1.13
Indicates optional transport capabilites such as quality of service and median channel type capabilites.
OBJECT-TYPE    
  DisplayString  

h245LogChannelsRedundancyEncoding 0.0.8.341.1.3.1.4.2.1.14
Indicates which redundancy encoding modes are supported (if any). The redundancyEncoding indicates that the redundant encoding method indicated in this parameter is to be used for this logical channel. The primary encoding is defined by the dataType of the forwardLogicalChannelParameters or the reverseLogicalChannelParameters, respectively. The type of redundancy encoding to be applied for this logical channel is identified by the redundancyEncodingMethod parameter, the secondary encoding is specified in the secondaryEncoding parameter. The DataType (audio, video, etc.) selected for both primary and secondary encoding shall match and shall be in accordance with the redundancyEncodingMethod selected.
OBJECT-TYPE    
  DisplayString  

h245LogChannelsSrcTerminalLabel 0.0.8.341.1.3.1.4.2.1.15
This is used to identify the terminal number of the sender of the OpenLogicalChannel message.
OBJECT-TYPE    
  OCTET STRING Size(2)  

h245LogChannelOpenLogicalChannelTable 0.0.8.341.1.3.1.4.3
This table contains information about statistics for H.245 open logical channels.It is a list of statistics entries. The number of entries equals to the number of control channels for all H.245 stacks in a system.
OBJECT-TYPE    
  SEQUENCE OF  
    H245LogChannelOpenLogicalChannelTableEntry

h245LogChannelOpenLogicalChannelTableEntry 0.0.8.341.1.3.1.4.3.1
It contains objects that describe statistics for H.245 open logical channel procedure.
OBJECT-TYPE    
  H245LogChannelOpenLogicalChannelTableEntry  

h245LogChanOpenLogChanTotalRequests 0.0.8.341.1.3.1.4.3.1.1
The total number of attempts to open a uni-directional logical channel between an outgoing LCSE and a peer incoming LCSE and a bi-directional logical channel between an outgoing B-LCSE and a peer incoming B-LCSE.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanAcks 0.0.8.341.1.3.1.4.3.1.2
The total number of confirmations to accept an open logical channel request. This would represent the final stage of establishing a uni-directional channel that can be used for transmission.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanConfirms 0.0.8.341.1.3.1.4.3.1.3
The total number of confirmations used for the purpose of bi-directional channel signaling that the reverse channel is open and can be used for transmission. This represents the final stage of establishing a bi-directional channel that can be used for transmission in both directions.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejects 0.0.8.341.1.3.1.4.3.1.4
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectUnspecified 0.0.8.341.1.3.1.4.3.1.5
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was unspecified.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectUnsuitableReverseParameters 0.0.8.341.1.3.1.4.3.1.6
The total number of rejections used as a response to a request to open a bi-directional logical channel from a B-LCSE when the reason for the rejection was the reverseLogicalChannelParameters in the OpenLogicalChannel were inappropriate.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectDataTypeNotSupported 0.0.8.341.1.3.1.4.3.1.7
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a terminal not capable of supporting the desired dataType.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectDataTypeNotAvailable 0.0.8.341.1.3.1.4.3.1.8
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a terminal not capable of supporting the desired dataType simultaneously with the dataTypes of logical channels that are already open.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectUnknownDataType 0.0.8.341.1.3.1.4.3.1.9
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a terminal not understanding the dataType indicated in the OpenLogicalChannel.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectDataTypeALCombinationNotSupported 0.0.8.341.1.3.1.4.3.1.10
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a terminal not capable of supporting the dataType indicated in OpenLogicalChannel simultaneously with the Adaptation Layer type indicated in H223LogicalChannelParameters.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectMulticastChannelNotAllowed 0.0.8.341.1.3.1.4.3.1.11
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a multicast Channel that could not be opened.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectInsuffientBandwdith 0.0.8.341.1.3.1.4.3.1.12
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was because permission to use the requested bandwidth for the logical channel was denied.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectSeparateStackEstablishmentFailed 0.0.8.341.1.3.1.4.3.1.13
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a request to run the data portion of a call on a separate stack failed.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectInvalidSessionID 0.0.8.341.1.3.1.4.3.1.14
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to an attempt by a slave to set the SessionID when opening a logical channel to the master.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectMasterSlaveConflict 0.0.8.341.1.3.1.4.3.1.15
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to an attempt by a slave to open a logical channel in which the master has determined a conflict may occur.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectWaitForCommunicationMode 0.0.8.341.1.3.1.4.3.1.16
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to an attempt to open a logical channel before MC has transmitted the CommunicationModeCommand.
OBJECT-TYPE    
  Counter32  

h245LogChanOpenLogChanRejectInvalidDependentChannel 0.0.8.341.1.3.1.4.3.1.17
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to an attempt to open a logical channel with a dependent channel specified which is not present.
OBJECT-TYPE    
  Counter32  

h245LogChansOpenLogChanRejectReplacementForRejected 0.0.8.341.1.3.1.4.3.1.18
The total number of rejections used as a response to a request to open a uni or a bi-directional logical channel from a LCSE or B-LCSE when the reason for the rejection was due to a logical channel of the type attempted cannot be opened using the replacementFor parameter.
OBJECT-TYPE    
  Counter32  

h245LogChannelCloseLogicalChannelTable 0.0.8.341.1.3.1.4.4
This table contains information about H.245 statistics for close logical channel procedure. It is a list of statistics entries. The number of entries equals to the number of control channels for all H.245 stacks in a system.
OBJECT-TYPE    
  SEQUENCE OF  
    H245LogChannelCloseLogicalChannelTableEntry

h245LogChannelCloseLogicalChannelTableEntry 0.0.8.341.1.3.1.4.4.1
It contains objects that describe statistics for H.245 close logical channel procedure.
OBJECT-TYPE    
  H245LogChannelCloseLogicalChannelTableEntry  

h245LogChanCloseLogChannels 0.0.8.341.1.3.1.4.4.1.1
The number of attempts made by the outgoing LCSE or B-LCSE to close a logical channel between two peer LCSEs or B-LCSEs. Note - In the case of a bi-directional logical channel, this closes both forward and reverse channels. It is not possible to close one and not the other.
OBJECT-TYPE    
  Counter32  

h245LogChanCloseLogChanAcks 0.0.8.341.1.3.1.4.4.1.2
The number of attempts made to confirm the closing of a logical channel connection.
OBJECT-TYPE    
  Counter32  

h245LogChanCloseLogChanRequests 0.0.8.341.1.3.1.4.4.1.3
The number of attempts made by the outgoing CLCSE to request the closing of a logical channel connection between two peer LCSEs.
OBJECT-TYPE    
  Counter32  

h245LogChanCloseLogChanRequestsAcks 0.0.8.341.1.3.1.4.4.1.4
The number of attempts made by the incoming CLCSE to indicate that the logical channel connection will be closed.
OBJECT-TYPE    
  Counter32  

h245LogChanCloseLogChanRequestRejects 0.0.8.341.1.3.1.4.4.1.5
The number of attempts made by the incoming CLCSE to indicate that the logical channel connection will not be closed. The only valid cause value for rejecting to close a channel is unspecified.
OBJECT-TYPE    
  Counter32  

h245LogChanCloseLogChanRequestReleases 0.0.8.341.1.3.1.4.4.1.6
The number of attempts made by the outgoing CLCSE in the case of a time out.
OBJECT-TYPE    
  Counter32  

h245MiscRoundTripDelayTable 0.0.8.341.1.3.1.6.1
This table contains information about round trip delay tests. It is a list round trip delay entries. The number of entries equals to the number of tests performed.
OBJECT-TYPE    
  SEQUENCE OF  
    H245MiscRoundTripDelayTableEntry

h245MiscRoundTripDelayTableEntry 0.0.8.341.1.3.1.6.1.1
It contains information about the round trip delay messages.
OBJECT-TYPE    
  H245MiscRoundTripDelayTableEntry  

h245MiscRTDState 0.0.8.341.1.3.1.6.1.1.1
The state of the round trip delay. It can be either idle or waiting for response.
OBJECT-TYPE    
  INTEGER idle(1), waiting(2)  

h245MiscT105TimerExpired 0.0.8.341.1.3.1.6.1.1.2
Round trip delay timer expired waiting for a respinse from the other entity.
OBJECT-TYPE    
  TruthValue  

h245MiscLastRTDRequestSent 0.0.8.341.1.3.1.6.1.1.3
Information about the last round trip delay request sent.
OBJECT-TYPE    
  Integer32  

h245MiscLastRTDRequestRcvd 0.0.8.341.1.3.1.6.1.1.4
Information about the last round trip delay request received.
OBJECT-TYPE    
  Integer32  

h245MiscLastRTDResponseSent 0.0.8.341.1.3.1.6.1.1.5
Information about the last round trip delay response sent.
OBJECT-TYPE    
  Integer32  

h245MiscLastRTDResponseRcvd 0.0.8.341.1.3.1.6.1.1.6
Information about the last round trip delay response received.
OBJECT-TYPE    
  Integer32  

h245MiscMaintenanceLoopTable 0.0.8.341.1.3.1.6.2
This table contains information about maintenance loop mode. It is a list of maintenance loop entries. The number of entries equals to the number of maintenance loop procedures.
OBJECT-TYPE    
  SEQUENCE OF  
    H245MiscMaintenanceLoopTableEntry

h245MiscMaintenanceLoopTableEntry 0.0.8.341.1.3.1.6.2.1
It contains entries that describe the maintenance loop procedure.
OBJECT-TYPE    
  H245MiscMaintenanceLoopTableEntry  

h245MiscMaintenanceLoopDirection 0.0.8.341.1.3.1.6.2.1.1
The direction could be either incoming or outgoing.
OBJECT-TYPE    
  INTEGER incoming(1), outgoing(2)  

h245MiscMLState 0.0.8.341.1.3.1.6.2.1.2
The state of the channel which can be: not looped, waiting to be looped or looped.
OBJECT-TYPE    
  INTEGER notLooped(1), waiting(2), looped(3)  

h245MiscNumberOfRequests 0.0.8.341.1.3.1.6.2.1.3
Number of loop requests on that channel.
OBJECT-TYPE    
  Counter32  

h245MiscNumberOfAcks 0.0.8.341.1.3.1.6.2.1.4
Number of maintenance loop acks on the channel.
OBJECT-TYPE    
  Counter32  

h245MiscLastMLRequestOrAckType 0.0.8.341.1.3.1.6.2.1.5
The type of the last request or response received. The type can be either media or logical channel loop.
OBJECT-TYPE    
  INTEGER looped(1), notLooped(2), awaitingResponse(3)  

h245MiscMLMediaOrLogicalChannelLoopRejectChannelNumber 0.0.8.341.1.3.1.6.2.1.6
If the loop rejecte is of type media loop or logical channel loop then this represents the channel number for the logical channel.
OBJECT-TYPE    
  Integer32  

h245MiscNumberOfRejects 0.0.8.341.1.3.1.6.2.1.7
Number of loop requests that got rejected.
OBJECT-TYPE    
  Counter32  

h245MiscLastRejectType 0.0.8.341.1.3.1.6.2.1.8
The type of the last reject for the loop request.
OBJECT-TYPE    
  INTEGER system-loop(1), media-loop(2), log-channel-loop(3)  

h245MiscErrorCode 0.0.8.341.1.3.1.6.2.1.9
The error code that caused the rejection of the loop request.
OBJECT-TYPE    
  INTEGER can-not-perform-loop(1)  

h245ConferenceTerminalTable 0.0.8.341.1.3.1.5.1
This table contains information about the terminal charachteristics that are related to a conference. It is a list entries. The number of entries equals to the number of conferences.
OBJECT-TYPE    
  SEQUENCE OF  
    H245ConferenceTerminalTableEntry

h245ConferenceTerminalTableEntry 0.0.8.341.1.3.1.5.1.1
It contains objects that describe a terminal as a conference participant.
OBJECT-TYPE    
  H245ConferenceTerminalTableEntry  

h245ConferenceConferenceId 0.0.8.341.1.3.1.5.1.1.1
The conference identifier.
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

h245ConferenceTerminalLabel 0.0.8.341.1.3.1.5.1.1.2
The terminal label of this terminal
OBJECT-TYPE    
  OCTET STRING Size(2)  

h245ConferenceControlChannelIndex 0.0.8.341.1.3.1.5.1.1.3
The index of the control channel table that identifies the control channel for the conference.
OBJECT-TYPE    
  Integer32  

h245ConferenceBroadcaster 0.0.8.341.1.3.1.5.1.1.4
The indicator of the terminal being a broadcaster.
OBJECT-TYPE    
  TruthValue  

h245ConferenceConferenceChair 0.0.8.341.1.3.1.5.1.1.5
The indicator of the terminal being a conference chair.
OBJECT-TYPE    
  TruthValue  

h245ConferenceMultipoint 0.0.8.341.1.3.1.5.1.1.6
The indicator of the conference being a multipoint.
OBJECT-TYPE    
  TruthValue  

h245ConferenceStatsTable 0.0.8.341.1.3.1.5.2
This table contains information about conference statistics. It is a list of conference statistics entries. The number of entries equals to the number of conferences on all system interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    H245ConferenceStatsTableEntry

h245ConferenceStatsTableEntry 0.0.8.341.1.3.1.5.2.1
It contains objects that describe conference statistics.
OBJECT-TYPE    
  H245ConferenceStatsTableEntry  

h245ConferenceBroadcastMyLogicalChannel 0.0.8.341.1.3.1.5.2.1.1
The number of attempts made by a terminal to transmit MCV command to force an associated MCU to broadcast its video signal used to transmit the picture of a chairman or VIP, alternatively to hold a picture source during the transmission of graphics.
OBJECT-TYPE    
  Counter32  

h245ConferenceCancelBroadcastMyLogicalChannel 0.0.8.341.1.3.1.5.2.1.2
The number of attempts made by a terminal to cancel MCV command.
OBJECT-TYPE    
  Counter32  

h245ConferenceSendThisSource 0.0.8.341.1.3.1.5.2.1.3
The number of attempts made by a terminal to send VCS command to MCU to cause transmission to itself of the video from the terminal whose identity number follows VCS.
OBJECT-TYPE    
  Counter32  

h245ConferenceCancelSendThisSource 0.0.8.341.1.3.1.5.2.1.4
The number of attempts made by a terminal to cancel VCS and return to automatic video switching at the MCU.
OBJECT-TYPE    
  Counter32  

h245ConferenceDropConference 0.0.8.341.1.3.1.5.2.1.5
The number of attempts made by a terminal that is chair-control to drop all terminals from the conference.
OBJECT-TYPE    
  Counter32  

h245ConferenceEqualiseDelay 0.0.8.341.1.3.1.5.2.1.6
The same meaning as the command ACE in H.230.
OBJECT-TYPE    
  Counter32  

h245ConferenceZeroDelay 0.0.8.341.1.3.1.5.2.1.7
The same meaning as the command ACZ defined in H.230.
OBJECT-TYPE    
  Counter32  

h245ConferenceMultipointModeCommand 0.0.8.341.1.3.1.5.2.1.8
The number of attempts made by the MCU to send request to a terminal to comply with all MCU requestMode requests.
OBJECT-TYPE    
  Counter32  

h245ConferenceCancelMultipointModeCommand 0.0.8.341.1.3.1.5.2.1.9
The number of attempts made by the MCU to send a cancelation of a MultipointModeCommand.
OBJECT-TYPE    
  Counter32  

h245ConferenceVideoFreezePicture 0.0.8.341.1.3.1.5.2.1.10
The number of commands that are sent/received to/from the video decoder to complete updating the current video frame and subsequently display the frozen picture until receipt of the appropriate freeze-picture release control signal.
OBJECT-TYPE    
  Counter32  

h245ConferenceVideoFastUpdatePicture 0.0.8.341.1.3.1.5.2.1.11
The number of commands sent/received to enter the fast update mode.
OBJECT-TYPE    
  Counter32  

h245ConferenceVideoFastUpdateGOB 0.0.8.341.1.3.1.5.2.1.12
The number of commands sent/received by the video encoder to fast update one or more GOBs.
OBJECT-TYPE    
  Counter32  

h245ConferenceVideoTemporalSpatialTradeOff 0.0.8.341.1.3.1.5.2.1.13
The number of commands sent/received by video encoder to change its trade off between temporal and spatial resolution.
OBJECT-TYPE    
  Counter32  

h245ConferenceVideoSendSyncEveryGOB 0.0.8.341.1.3.1.5.2.1.14
The number of commands sent/received by video encoder to use sync for every GOB until the cancel command is received.
OBJECT-TYPE    
  Counter32  

h245ConferenceVideoFastUpdateMB 0.0.8.341.1.3.1.5.2.1.15
The number of sent/received by video encoder to perform a fast update of one or more MBs.
OBJECT-TYPE    
  Counter32  

h245MIBGroups 0.0.8.341.1.3.1.7.1
OBJECT IDENTIFIER    

h245ConfigurationGroup 0.0.8.341.1.3.1.7.1.1
.
OBJECT-GROUP    

h245ControlChannelGroup 0.0.8.341.1.3.1.7.1.2
.
OBJECT-GROUP    

h245CapExchangeGroup 0.0.8.341.1.3.1.7.1.3
.
OBJECT-GROUP    

h245LogChannelsGroup 0.0.8.341.1.3.1.7.1.4
.
OBJECT-GROUP    

h245ConferenceGroup 0.0.8.341.1.3.1.7.1.5
.
OBJECT-GROUP    

h245MiscGroup 0.0.8.341.1.3.1.7.1.6
.
OBJECT-GROUP    

h245MIBCompliance 0.0.8.341.1.3.1.7.2
The set of objects required for compliance.
MODULE-COMPLIANCE