H150E-MIB

File: H150E-MIB.mib (53254 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC

Imported symbols

IpAddress MODULE-IDENTITY OBJECT-TYPE
NOTIFICATION-TYPE enterprises TEXTUAL-CONVENTION

Defined Types

DisplayString  
STRING    

DateAndTime  
TEXTUAL-CONVENTION    
  current STRING Size(8)

ReadWrite  
TEXTUAL-CONVENTION    
  current INTEGER readWrite(1), readOnly(2)

H150eErrorHistoryEntry  
SEQUENCE    
  h150eErrorIndex INTEGER
  h150eErrorDateTime DateAndTime
  h150eErrorClass INTEGER
  h150eErrorCode INTEGER
  h150eAccessSlot INTEGER
  h150eAccessPort INTEGER
  h150eErrorDescription DisplayString
  h150eErrorSeverity INTEGER

H150eSlotTableEntry  
SEQUENCE    
  cardIndex INTEGER
  cardBoxNum INTEGER
  cardSlotNum INTEGER
  cardType DisplayString
  cardDescription DisplayString
  cardCodeNumber DisplayString
  cardState INTEGER

H150ePortTableEntry  
SEQUENCE    
  portIndex INTEGER
  portCardIndex INTEGER
  portType DisplayString
  portState INTEGER
  portLock INTEGER
  portLogicalPortNumber INTEGER

H150eExtensionTableEntry  
SEQUENCE    
  extensionIndex INTEGER
  extensionDescription DisplayString
  extensionCodeNumber DisplayString

H150eLanConnTableEntry  
SEQUENCE    
  lanConnIndex INTEGER
  lanConnDescription DisplayString
  lanConnIpAddress IpAddress
  lanConnSubnetMask IpAddress
  lanConnStatus INTEGER

H150eFeatureStatEntry  
SEQUENCE    
  featureIndex INTEGER
  featureDescription DisplayString
  featureCounter INTEGER

UmSubscriberTableEntry  
SEQUENCE    
  umLogicalPortNumber INTEGER
  umInternalCallNumber DisplayString
  umDIDNumber DisplayString
  umE164Number DisplayString
  umDisplayName DisplayString
  umStationType INTEGER
  umPortStatus INTEGER
  umClassOfService INTEGER
  umDisplayLanguage INTEGER
  umCfssTarget DisplayString

UmUnconfirmedTrapTableEntry  
SEQUENCE    
  umTrapIdentifier INTEGER
  umTrapType INTEGER
  umTrapLogicalPortNumber INTEGER

Defined Values

sni 1.3.6.1.4.1.231
OBJECT IDENTIFIER    

siemensUnits 1.3.6.1.4.1.231.7
OBJECT IDENTIFIER    

pn 1.3.6.1.4.1.231.7.2
OBJECT IDENTIFIER    

h150eOffice 1.3.6.1.4.1.231.7.2.9
HiPath 3000 and Hicom 150E/H MIB.
MODULE-IDENTITY    

h150eControlGroup 1.3.6.1.4.1.231.7.2.9.1
OBJECT IDENTIFIER    

h150eErrorHistoryGroup 1.3.6.1.4.1.231.7.2.9.2
OBJECT IDENTIFIER    

h150eSystemInfoGroup 1.3.6.1.4.1.231.7.2.9.3
OBJECT IDENTIFIER    

h150eStatisticsGroup 1.3.6.1.4.1.231.7.2.9.4
OBJECT IDENTIFIER    

h150eCdrConfigGroup 1.3.6.1.4.1.231.7.2.9.5
OBJECT IDENTIFIER    

h150eTrapSpecifications 1.3.6.1.4.1.231.7.2.9.6
OBJECT IDENTIFIER    

umProxyGroup 1.3.6.1.4.1.231.7.2.9.8
OBJECT IDENTIFIER    

h150eSysState 1.3.6.1.4.1.231.7.2.9.1.1
The actual error state of the device. Contains the highest severity level of the recent error events. This object is updated automatically, but it can also be modified manually.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), minor(3), major(4), critical(5)  

tftpSwitchoverDateTime 1.3.6.1.4.1.231.7.2.9.1.2
Date and time for the switchover to the new system software. The configured time will be ignored, if the upgrade is started with the downloadAndImmediateSwitchover define of the tftpDownloadAction object. octet format: field octets contents range hex (range dez) ----- ------ -------- --------- ---------- 1 1-2 year 00 00 - FF FF (0 - 65536) 2 3 month 01 - 0C (1 - 12) 3 4 day 01 - 1F (1 - 31) 4 5 hour 00 - 17 (0 - 23) 5 6 minutes 00 - 3B (0 - 59) 6 7 seconds 00 - 3B (0 - 60) 7 8 deci-seconds 00 - 09 (0 - 9) For example, to configure Wednesday June 16, 1999 at 8:30:15 AM would be configured as 07 cf 06 10 08 1E 0F 00
OBJECT-TYPE    
  DateAndTime  

tftpDownloadAction 1.3.6.1.4.1.231.7.2.9.1.3
When this object is set to downloadAndImmediateSwitchover (2), the device will download the new software from the configured host. After the download is finished, the device will automatically restart with the new software. If downloadAndDelayedSwitchover (3) is specified, the new image is copied to the device. When the tftpDateTime value is matched, the device discontinues its normal operation and does the software switchover. After an automatic reset, it starts with the new system software. Setting downloadWithoutSwitchover (4) initiates a download without switching over to the new software. When the device is not downloading, this object will have a value of notDownloading(1).
OBJECT-TYPE    
  INTEGER notDownloading(1), downloadAndImmediateSwitchover(2), downloadAndDelayedSwitchover(3), downloadWithoutSwitchover(4)  

h150eResetControl 1.3.6.1.4.1.231.7.2.9.1.4
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. When the device is running normally, this variable has a value of running(1). The effect of configuring this object is identical to the configuration of the probeResetControl object of RFC 2021, except for the coldBoot option which is not supported.
OBJECT-TYPE    
  INTEGER running(1), warmBoot(2)  

h150eSwitchoverState 1.3.6.1.4.1.231.7.2.9.1.5
The values readyForSwitchover (1) and notReadyForSwitchover (2) indicate whether the system is ready to be switched over to the new software that was downloaded to the shadow flash area, or not. If it is not passible, h150eShadowFlashState gives details on the reason. Setting this object to switchoverNow (3) causes the device to switchover immediately to the new software which was downloaded to the shadow flash area before and restart the system. initSwitchoverDelayed(4) causes a delayed switchover.
OBJECT-TYPE    
  INTEGER readyForSwitchover(1), notReadyForSwitchover(2), initSwitchoverNow(3), initSwitchoverDelayed(4)  

h150eShadowFlashState 1.3.6.1.4.1.231.7.2.9.1.6
This object informs about the state of the shadow flash memory area which is used to buffer a new software image that is being downloaded to the system. A download is only possible when the state is flashDeleted (1). It is not possible to download if the state is flashNotDeleted(2), nor if it's flashWriteProtected(3) (this means it is internally locked by software because the system is not in the state of accepting new flash data). If the flash memory is smaller than 8 MB ( flashTooSmall(4) ), no transfer is possible, too. It is possible to delete an inactive software image from the shadow flash area by setting deleteFlashNow (5).
OBJECT-TYPE    
  INTEGER flashDeleted(1), flashNotDeleted(2), flashWriteProtected(3), flashTooSmall(4), deleteFlashNow(5)  

h150eLoadLevel 1.3.6.1.4.1.231.7.2.9.1.7
The actual CPU load level (per cent).
OBJECT-TYPE    
  INTEGER 0..100  

h150eTrapRepetitions 1.3.6.1.4.1.231.7.2.9.1.8
The number of trap repetitions for error events marked as very important (log-and-multiple-trap).
OBJECT-TYPE    
  INTEGER 1..5  

h150eCdrBufferState 1.3.6.1.4.1.231.7.2.9.1.9
Use this object to delete the CDR buffer.
OBJECT-TYPE    
  INTEGER accounting(1), deleteBufferNow(2), notAccounting(3)  

h150eLogBufferState 1.3.6.1.4.1.231.7.2.9.1.10
Use this object to delete the log data.
OBJECT-TYPE    
  INTEGER logging(1), deleteBufferNow(2)  

numberOfErrorHistoryEntries 1.3.6.1.4.1.231.7.2.9.2.1
Contains the number of errors to be found in the error history table. This value can be used to delete the last x entries (reduce value by x) or to delete all entries (value = 0).
OBJECT-TYPE    
  INTEGER 0..2147483187  

h150eErrorHistoryTable 1.3.6.1.4.1.231.7.2.9.2.2
This table contains information about the errors that occured.
OBJECT-TYPE    
  SEQUENCE OF  
    H150eErrorHistoryEntry

h150eErrorHistoryEntry 1.3.6.1.4.1.231.7.2.9.2.2.1
The trap history table entries.
OBJECT-TYPE    
  H150eErrorHistoryEntry  

h150eErrorIndex 1.3.6.1.4.1.231.7.2.9.2.2.1.1
Identification of an table entry enabled by this index.
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eErrorDateTime 1.3.6.1.4.1.231.7.2.9.2.2.1.2
Time, when the error occurred.
OBJECT-TYPE    
  DateAndTime  

h150eErrorClass 1.3.6.1.4.1.231.7.2.9.2.2.1.3
Contains the error class number (type of trap).
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eErrorCode 1.3.6.1.4.1.231.7.2.9.2.2.1.4
Contains the error code.
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eAccessSlot 1.3.6.1.4.1.231.7.2.9.2.2.1.5
Contains the access slot for the error.
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eAccessPort 1.3.6.1.4.1.231.7.2.9.2.2.1.6
Contains the local access port of the error. Local means that port numbering starts with 0 for each card.
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eErrorDescription 1.3.6.1.4.1.231.7.2.9.2.2.1.7
Detailed information about errors.
OBJECT-TYPE    
  DisplayString Size(1..255)  

h150eErrorSeverity 1.3.6.1.4.1.231.7.2.9.2.2.1.8
Contains the severity of the specific error.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), minor(3), major(4), critical(5)  

sysHardwareVersion 1.3.6.1.4.1.231.7.2.9.3.1
Contains the version string of the system hardware.
OBJECT-TYPE    
  DisplayString Size(1..25)  

sysSoftwareVersion 1.3.6.1.4.1.231.7.2.9.3.2
Contains the version string of the system software.
OBJECT-TYPE    
  DisplayString Size(1..25)  

sysCodeNumber 1.3.6.1.4.1.231.7.2.9.3.3
Contains the code number of the system software.
OBJECT-TYPE    
  DisplayString Size(1..25)  

sysSoftwareLocation 1.3.6.1.4.1.231.7.2.9.3.4
Contains location (address space) where the system software is currently running.
OBJECT-TYPE    
  INTEGER lower(1), upper(2)  

numberOfSlotTableEntries 1.3.6.1.4.1.231.7.2.9.3.5
Contains the number of entries in the slot table.
OBJECT-TYPE    
  INTEGER 0..2147483187  

h150eSlotTable 1.3.6.1.4.1.231.7.2.9.3.6
This table contains information about the system slots.
OBJECT-TYPE    
  SEQUENCE OF  
    H150eSlotTableEntry

h150eSlotTableEntry 1.3.6.1.4.1.231.7.2.9.3.6.1
The slot table entries.
OBJECT-TYPE    
  H150eSlotTableEntry  

cardIndex 1.3.6.1.4.1.231.7.2.9.3.6.1.1
Identification of an table entry enabled by this index.
OBJECT-TYPE    
  INTEGER 1..2147483187  

cardBoxNum 1.3.6.1.4.1.231.7.2.9.3.6.1.2
Index of the box where the card is placed.
OBJECT-TYPE    
  INTEGER 1..2147483187  

cardSlotNum 1.3.6.1.4.1.231.7.2.9.3.6.1.3
Index of the slot where the card is placed.
OBJECT-TYPE    
  INTEGER 1..2147483187  

cardType 1.3.6.1.4.1.231.7.2.9.3.6.1.4
Code for the type of the card.
OBJECT-TYPE    
  DisplayString Size(1..40)  

cardDescription 1.3.6.1.4.1.231.7.2.9.3.6.1.5
Textual card description.
OBJECT-TYPE    
  DisplayString Size(1..255)  

cardCodeNumber 1.3.6.1.4.1.231.7.2.9.3.6.1.6
Contains the code number of the card software.
OBJECT-TYPE    
  DisplayString Size(1..25)  

cardState 1.3.6.1.4.1.231.7.2.9.3.6.1.7
Contains the state of the card.
OBJECT-TYPE    
  INTEGER normal(1), warning(2), minor(3), major(4), critical(5)  

numberOfPortTableEntries 1.3.6.1.4.1.231.7.2.9.3.7
Contains the number of entries in the port table.
OBJECT-TYPE    
  INTEGER 0..2147483187  

h150ePortTable 1.3.6.1.4.1.231.7.2.9.3.8
This table contains information about the system ports.
OBJECT-TYPE    
  SEQUENCE OF  
    H150ePortTableEntry

h150ePortTableEntry 1.3.6.1.4.1.231.7.2.9.3.8.1
The port table entries.
OBJECT-TYPE    
  H150ePortTableEntry  

portIndex 1.3.6.1.4.1.231.7.2.9.3.8.1.1
Identification of an table entry enabled by this index.
OBJECT-TYPE    
  INTEGER 1..2147483187  

portCardIndex 1.3.6.1.4.1.231.7.2.9.3.8.1.2
Reference to the card the port is assigned to.
OBJECT-TYPE    
  INTEGER 1..2147483187  

portType 1.3.6.1.4.1.231.7.2.9.3.8.1.3
Contains the type of the port.
OBJECT-TYPE    
  DisplayString Size(1..40)  

portState 1.3.6.1.4.1.231.7.2.9.3.8.1.4
Contains the general state of the port.
OBJECT-TYPE    
  INTEGER inactive(1), active(2)  

portLock 1.3.6.1.4.1.231.7.2.9.3.8.1.5
This object contains the lock state of the port. A software lock can be enabled / disabled. Possible state transitions: unlocked -> lockedBySoftware lockedByHardware -> lockedBySoftAndHardware lockedBySoftware -> unlocked lockedBySoftAndHardware -> lockedByHardware
OBJECT-TYPE    
  INTEGER unlocked(1), lockedBySoftware(2), lockedByHardware(3), lockedBySoftAndHardware(4)  

portLogicalPortNumber 1.3.6.1.4.1.231.7.2.9.3.8.1.6
The logical port number.
OBJECT-TYPE    
  INTEGER 0..2147483187  

numberOfExtensionTableEntries 1.3.6.1.4.1.231.7.2.9.3.9
Contains the number of entries in the hardware extension table.
OBJECT-TYPE    
  INTEGER 0..2147483187  

h150eExtensionTable 1.3.6.1.4.1.231.7.2.9.3.10
This table contains information about the hardware extensions.
OBJECT-TYPE    
  SEQUENCE OF  
    H150eExtensionTableEntry

h150eExtensionTableEntry 1.3.6.1.4.1.231.7.2.9.3.10.1
The extension table entries.
OBJECT-TYPE    
  H150eExtensionTableEntry  

extensionIndex 1.3.6.1.4.1.231.7.2.9.3.10.1.1
Identification of an table entry enabled by this index.
OBJECT-TYPE    
  INTEGER 1..2147483187  

extensionDescription 1.3.6.1.4.1.231.7.2.9.3.10.1.2
Contains a textual desription of the hardware extension.
OBJECT-TYPE    
  DisplayString Size(1..40)  

extensionCodeNumber 1.3.6.1.4.1.231.7.2.9.3.10.1.3
Contains the code number of the hardware extension.
OBJECT-TYPE    
  DisplayString Size(1..40)  

numberOfLanConnTableEntries 1.3.6.1.4.1.231.7.2.9.3.11
Contains the number of entries in the LAN connection table.
OBJECT-TYPE    
  INTEGER 0..2147483187  

h150eLanConnTable 1.3.6.1.4.1.231.7.2.9.3.12
This table contains information about the interfaces available for LAN access of the device or its cards.
OBJECT-TYPE    
  SEQUENCE OF  
    H150eLanConnTableEntry

h150eLanConnTableEntry 1.3.6.1.4.1.231.7.2.9.3.12.1
The LAN connection table entries.
OBJECT-TYPE    
  H150eLanConnTableEntry  

lanConnIndex 1.3.6.1.4.1.231.7.2.9.3.12.1.1
Identification of an table entry enabled by this index.
OBJECT-TYPE    
  INTEGER 1..2147483187  

lanConnDescription 1.3.6.1.4.1.231.7.2.9.3.12.1.2
Textual desription on the LAN connection.
OBJECT-TYPE    
  DisplayString Size(0..255)  

lanConnIpAddress 1.3.6.1.4.1.231.7.2.9.3.12.1.3
IP address of the LAN connection.
OBJECT-TYPE    
  IpAddress  

lanConnSubnetMask 1.3.6.1.4.1.231.7.2.9.3.12.1.4
Subnet mask of the LAN connection.
OBJECT-TYPE    
  IpAddress  

lanConnStatus 1.3.6.1.4.1.231.7.2.9.3.12.1.5
Status of the LAN Connection.
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3)  

hiPathAllServeServerIpAddress 1.3.6.1.4.1.231.7.2.9.3.13
IP address of the HiPath AllServe (Venus) server.
OBJECT-TYPE    
  IpAddress  

indexOfLastPortStatusNotificationTrap 1.3.6.1.4.1.231.7.2.9.3.14
Index of last 'port status change' notification trap sent by the device. Note: only reset possible (0)
OBJECT-TYPE    
  INTEGER 1..2147483187  

sysSnmpAgentVersion 1.3.6.1.4.1.231.7.2.9.3.15
Version number of the systems SNMP agent (formatting: x.y.z.)
OBJECT-TYPE    
  DisplayString Size(0..255)  

sysShadowSoftwareVersion 1.3.6.1.4.1.231.7.2.9.3.16
Contains the version string of the inactive (shadow) system software. This is the software image that has been transferred to the system without triggering the software switchover afterwards.
OBJECT-TYPE    
  DisplayString Size(1..25)  

sysHiPathSymbolSubInfo 1.3.6.1.4.1.231.7.2.9.3.17
Contains an URL to detailed symbol information in addition to the symbol information contained in the common mib object deviceSymbolInfo.
OBJECT-TYPE    
  DisplayString Size(0..255)  

sysHiPathBranding 1.3.6.1.4.1.231.7.2.9.3.18
Contains the branding string of the device.
OBJECT-TYPE    
  DisplayString Size(0..255)  

sysTimezoneOffset 1.3.6.1.4.1.231.7.2.9.3.19
Timezone offset in minutes.
OBJECT-TYPE    
  INTEGER -1440..1440  

numberOfFeatureStatTableEntries 1.3.6.1.4.1.231.7.2.9.4.1
Contains the number of feature counters to be found in the table.
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eFeatureStatTable 1.3.6.1.4.1.231.7.2.9.4.2
This table contains information about the usage of specific system features. It is designed to monitor the use of these features for a limited time only, because each counter is limited to one byte.
OBJECT-TYPE    
  SEQUENCE OF  
    H150eFeatureStatEntry

h150eFeatureStatEntry 1.3.6.1.4.1.231.7.2.9.4.2.1
The feature statistics table entries.
OBJECT-TYPE    
  H150eFeatureStatEntry  

featureIndex 1.3.6.1.4.1.231.7.2.9.4.2.1.1
Identification of an table entry enabled by this index.
OBJECT-TYPE    
  INTEGER 1..2147483187  

featureDescription 1.3.6.1.4.1.231.7.2.9.4.2.1.2
Description of the feature.
OBJECT-TYPE    
  DisplayString Size(1..255)  

featureCounter 1.3.6.1.4.1.231.7.2.9.4.2.1.3
This Counter indicates how often the feature was used since last system reload
OBJECT-TYPE    
  INTEGER 1..2147483187  

featureStatTableReset 1.3.6.1.4.1.231.7.2.9.4.3
Enables reset (2) of all counters of the featureStatTable.
OBJECT-TYPE    
  INTEGER counting(1), reset(2)  

h150eCdrSeparator 1.3.6.1.4.1.231.7.2.9.5.1
Separator between following CDRs: DOS mode (1): CRLF UNIX mode (2): LF
OBJECT-TYPE    
  INTEGER dosMode(1), unixMode(2)  

h150eCdrElementSeparator 1.3.6.1.4.1.231.7.2.9.5.2
Separator between the different elements of one CDR: pipe (0x7c): '|' semicolon (0x3b): ';' blank (0x20): ' ' NOTE: no write access for blank
OBJECT-TYPE    
  INTEGER pipe(124), semicolon(59), blank(32)  

h150eCdrThresholdValue 1.3.6.1.4.1.231.7.2.9.5.3
CDR buffer limit (only relevant for TFTP server mode): threshold value (in percent) for sending a CDR data notification trap recommended values: 0 to 80
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eCdrTftpFileCounter 1.3.6.1.4.1.231.7.2.9.5.4
CDR (only relevant for TFTP client mode): For each transferred CDR-file a new filename is necassary filename: 'GDS.c'
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eCdrTftpServerDestAddress 1.3.6.1.4.1.231.7.2.9.5.5
Destination IP addresse of CDR TFTP server (only relevant for TFTP client mode)
OBJECT-TYPE    
  IpAddress  

h150eCdrTftpServerAlternateDestAddress 1.3.6.1.4.1.231.7.2.9.5.6
Alternate destination IP addresse of CDR TFTP server (only relevant for TFTP client mode): is the CDR TFTP Server not reachable the switch transfers CDR data to this alternative server
OBJECT-TYPE    
  IpAddress  

h150eCdrTftpClientTimer 1.3.6.1.4.1.231.7.2.9.5.7
cycle time in minutes for initiating CDR output, max value 1439 minutes (23hours,59minutes) (only relevant for TFTP client mode)
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eCdrTcpServerDestAddress 1.3.6.1.4.1.231.7.2.9.5.8
Destination IP addresse of CDR TCP server (only relevant for TCP client mode)
OBJECT-TYPE    
  IpAddress  

h150eCdrTcpServerDestPort 1.3.6.1.4.1.231.7.2.9.5.9
Destination TCP port of CDR TCP server (only relevant for TCP client mode)
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eCdrOutputMode 1.3.6.1.4.1.231.7.2.9.5.10
CDR (Call Detailed Record) output mode: V24-Port (1): the PABX is permanently connected over a V.24 connection to an extern application and sends each CDR immidiatly NOTE: no write access UPN-Port (2): the PABX is permanently connected over terminal adapter (PPM) connection to an extern application and sends each CDR immidiatly NOTE: no write access PCVPL-Port (3): the PEBX is permanently connected over a CorNet TS connection to an extern application (PCVPL) and sends each CDR immidiatly NOTE: no write access TFTP-Client (4): the PABX sends the collected CDRs to the administrated TFTP-Server TFTP-Server (5): an extern TFTP client can request the collected CDRs TCP-Client (6): the PABX is permanently connected to an extern TCP server and sends each CDR immidiatly NoOutput (7): no output for CDR
OBJECT-TYPE    
  INTEGER v24port(1), uPNport(2), pCVPLport(3), tftpClient(4), tftpServer(5), tcpClient(6), noOutput(7)  

h150eIndexOfLastCdrNotificationTrap 1.3.6.1.4.1.231.7.2.9.5.11
Index of last CDR notification trap sent by device Note: only reset possible (0)
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150etypeOfLastCdrNotificationTrap 1.3.6.1.4.1.231.7.2.9.5.12
Type of last CDR notification trap sent by the the device: (1) : error - CDR buffer overflow (2) : warning - CDR buffer is filled up over 80% (3) : notification - administrateable CDR buffer threshold is reached -> extern TFTP client has to get the collected CDRs (4) : warning - TCP Client couldn't reach administrated server (5) : warning - TFTP Client couldn't reach administrated server (6) : warning - TFTP Client couldn't reach administrated alternative server
OBJECT-TYPE    
  INTEGER 1..2147483187  

h150eDescriptionOfLastCdrNotificationTrap 1.3.6.1.4.1.231.7.2.9.5.13
Textual description of last CDR notification trap sent by the device
OBJECT-TYPE    
  DisplayString Size(1..255)  

sendAlarm 1.3.6.1.4.1.231.7.2.9.6.1
If an error occurs, there will be checked if the errorClass is configured to trigger an immediate signalling. If so, a trap will be send to the management station containing the information shown above.
NOTIFICATION-TYPE    

sendCdrNotification 1.3.6.1.4.1.231.7.2.9.6.2
The CDR notification trap is sent to trigger further actions by the management station, for instance download of CDR data.
NOTIFICATION-TYPE    

sendPortStatusNotification 1.3.6.1.4.1.231.7.2.9.6.3
The 'port status change' notification trap is sent to trigger a polling of the port table by a management station. It indicates one or more changes in port states.
NOTIFICATION-TYPE    

sendUmRelatedChangeNotification 1.3.6.1.4.1.231.7.2.9.6.4
This trap is sent (to UM proxy), as the system detects changes.
NOTIFICATION-TYPE    

umNodeNumber 1.3.6.1.4.1.231.7.2.9.8.1
The node number of the system. Unique number identifying the PBX.
OBJECT-TYPE    
  DisplayString  

umSrsEnabled 1.3.6.1.4.1.231.7.2.9.8.2
Indicates whether the SRS feature flag of the machine is enabled or not. The small remote site flag is an overall flag of the system.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

umDefaultLanguage 1.3.6.1.4.1.231.7.2.9.8.3
Default language
OBJECT-TYPE    
  INTEGER german(1), english(2), french(3)  

umNumberOfSubscriberEntries 1.3.6.1.4.1.231.7.2.9.8.4
Number of entries in subscriber table.
OBJECT-TYPE    
  INTEGER 0..2147483187  

umSubscriberTable 1.3.6.1.4.1.231.7.2.9.8.5
This table contains information about all HFA-Clients available for UM-configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    UmSubscriberTableEntry

umSubscriberTableEntry 1.3.6.1.4.1.231.7.2.9.8.5.1
The UM-subscriber table entries.
OBJECT-TYPE    
  UmSubscriberTableEntry  

umLogicalPortNumber 1.3.6.1.4.1.231.7.2.9.8.5.1.1
The logical port number of the subscriber.
OBJECT-TYPE    
  INTEGER 0..9999  

umInternalCallNumber 1.3.6.1.4.1.231.7.2.9.8.5.1.2
The internal call number of the subscriber.
OBJECT-TYPE    
  DisplayString  

umDIDNumber 1.3.6.1.4.1.231.7.2.9.8.5.1.3
The DID number of the subscriber.
OBJECT-TYPE    
  DisplayString  

umE164Number 1.3.6.1.4.1.231.7.2.9.8.5.1.4
The E.164 call number of the subscriber.
OBJECT-TYPE    
  DisplayString  

umDisplayName 1.3.6.1.4.1.231.7.2.9.8.5.1.5
The display name of the subscriber.
OBJECT-TYPE    
  DisplayString  

umStationType 1.3.6.1.4.1.231.7.2.9.8.5.1.6
The type of the station. e.g. UP0, S0, HFA, ...
OBJECT-TYPE    
  INTEGER s0(0), up0(1), hfa(2), analog(3)  

umPortStatus 1.3.6.1.4.1.231.7.2.9.8.5.1.7
The status of the logical port.
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

umClassOfService 1.3.6.1.4.1.231.7.2.9.8.5.1.8
Classes of service can be used to restrict external calls. The types of calls that can be made from each station are defined for this purpose.
OBJECT-TYPE    
  INTEGER 1..15  

umDisplayLanguage 1.3.6.1.4.1.231.7.2.9.8.5.1.9
Display language
OBJECT-TYPE    
  INTEGER german(1), english(2), french(3)  

umCfssTarget 1.3.6.1.4.1.231.7.2.9.8.5.1.10
The target for Call Forwarding for Station out of Service.
OBJECT-TYPE    
  DisplayString  

umNumberOfUnconfirmedTraps 1.3.6.1.4.1.231.7.2.9.8.6
Number of entries in the umUnconfirmedTrapTable. A trap is confirmed and as result removed from the table, when its entry in the table is requested in a GetRequest for the 1st time. Traps presented in the table are retried as long as a GetRequest arrives.
OBJECT-TYPE    
  INTEGER 0..2147483187  

umUnconfirmedTrapTable 1.3.6.1.4.1.231.7.2.9.8.7
This table contains information about traps sent to UM-Proxy. The contained traps have not yet been confirmed.
OBJECT-TYPE    
  SEQUENCE OF  
    UmUnconfirmedTrapTableEntry

umUnconfirmedTrapTableEntry 1.3.6.1.4.1.231.7.2.9.8.7.1
The unconfirmed traps table entries.
OBJECT-TYPE    
  UmUnconfirmedTrapTableEntry  

umTrapIdentifier 1.3.6.1.4.1.231.7.2.9.8.7.1.1
Unique identifier of the trap. A SetRequest with value 0 removes the entry from the table. A value unequal to 0 is erroneous.
OBJECT-TYPE    
  INTEGER 0..2147483187  

umTrapType 1.3.6.1.4.1.231.7.2.9.8.7.1.2
The type of trap sent. Startup traps are sent as the system resets. The 2 types of modify traps aim on distinguishing between modification that are subscriber- related and those that are global.
OBJECT-TYPE    
  INTEGER startup(0), modifyGeneral(1), modifySubscriber(2)  

umTrapLogicalPortNumber 1.3.6.1.4.1.231.7.2.9.8.7.1.3
In case of a modifySubscriber-type trap, the logical port number that was the reason for the traps is presented here. For the other umTrapTypes, the content is undefined!
OBJECT-TYPE    
  INTEGER 0..2147483187  

umNetworkElementKey 1.3.6.1.4.1.231.7.2.9.8.8
A key that uniquely identifies the node towards UM. For a HiPath 3000/5000 this would be the IP-address, A simulator should additionally provide the port.
OBJECT-TYPE    
  DisplayString