GDCMP7002-MIB
File:
GDCMP7002-MIB.mib (71399 bytes)
Imported modules
Imported symbols
Defined Types
Mp7002VersionEntry |
|
SEQUENCE |
|
|
|
|
mp7002VersionIndex |
SCinstance |
|
|
mp7002FirmwareRev |
DisplayString |
|
|
mp7002ModelNumber |
DisplayString |
|
|
mp7002E1x |
INTEGER |
|
Mp7002MaintenanceEntry |
|
SEQUENCE |
|
|
|
|
mp7002MaintenanceLineIndex |
SCinstance |
|
|
mp7002SoftReset |
INTEGER |
|
|
mp7002SysUpTime |
INTEGER |
|
|
mp7002DefaultInit |
INTEGER |
|
|
mp7002ResetStats |
INTEGER |
|
|
mp7002LedStatus |
OCTET STRING |
|
|
mp7002E1Circuit |
DisplayString |
|
|
mp7002E1XCircuit |
DisplayString |
|
|
mp7002TSBundle1Name |
DisplayString |
|
|
mp7002TSBundle2Name |
DisplayString |
|
|
mp7002SetRealTime |
INTEGER |
|
|
mp7002AlarmStatus |
OCTET STRING |
|
|
mp7002SystemTimingGenStatus |
INTEGER |
|
|
mp7002FarEndResetStats |
INTEGER |
|
|
mp7002NearEndStatLastInitialized |
INTEGER |
|
|
mp7002FarEndStatLastInitialized |
INTEGER |
|
Mp7002ConfigEntry |
|
SEQUENCE |
|
|
|
|
mp7002ConfigIndex |
SCinstance |
|
|
mp7002InterfaceType |
INTEGER |
|
|
mp7002RcvrRange |
INTEGER |
|
|
mp7002TransmitClockSource |
INTEGER |
|
|
mp7002FallbackClockSource |
INTEGER |
|
|
mp7002FacilityDataLink |
INTEGER |
|
|
mp7002NearEndValidIntervals |
INTEGER |
|
|
mp7002FarEndValidIntervals |
INTEGER |
|
|
mp7002NetworkConnection |
INTEGER |
|
|
mp7002Framing |
INTEGER |
|
|
mp7002LineCoding |
INTEGER |
|
Mp7002SysTimingEntry |
|
SEQUENCE |
|
|
|
|
mp7002SysTimingIndex |
SCinstance |
|
|
mp7002SysTimingGen |
INTEGER |
|
Mp7002DCCConfigurationEntry |
|
SEQUENCE |
|
|
|
|
mp7002DCCConfigurationIndex |
SCinstance |
|
|
mp7002TimeSlot |
INTEGER |
|
|
mp7002Bandwidth |
INTEGER |
|
Mp7002HighwayAssignEntry |
|
SEQUENCE |
|
|
|
|
mp7002HighwayAssignIndex |
SCinstance |
|
|
mp7002TimeSlotBundle |
INTEGER |
|
|
mp7002StartTimeSlot |
INTEGER |
|
|
mp7002NumberOfTimeSlots |
INTEGER |
|
|
mp7002BundleDestination |
INTEGER |
|
|
mp7002ExecuteAssign |
INTEGER |
|
Mp7002DiagEntry |
|
SEQUENCE |
|
|
|
|
mp7002DiagIndex |
SCinstance |
|
|
mp7002TestPattern |
INTEGER |
|
|
mp7002DiagConfig |
INTEGER |
|
|
mp7002TestLimit |
INTEGER |
|
|
mp7002TestExecutionStatus |
INTEGER |
|
|
mp7002TestExceptions |
INTEGER |
|
|
mp7002TestResults |
INTEGER |
|
|
mp7002ResetTestResults |
INTEGER |
|
Mp7002NearEndCurrent15MinEntry |
|
SEQUENCE |
|
|
|
|
mp7002NearEndCurrent15MinIndex |
SCinstance |
|
|
mp7002NearEndCurrent15MinStat |
OCTET STRING |
|
Mp7002NearEndIntervalEntry |
|
SEQUENCE |
|
|
|
|
mp7002NearEndIntervalIndex |
SCinstance |
|
|
mp7002NearEndIntervalNumber |
INTEGER |
|
|
mp7002NearEndIntervalStat |
OCTET STRING |
|
Mp7002NearEndCurrent24HrEntry |
|
SEQUENCE |
|
|
|
|
mp7002NearEndCurrent24HrIndex |
SCinstance |
|
|
mp7002NearEndCurrent24HrStat |
OCTET STRING |
|
Mp7002NearEndRecent24HrEntry |
|
SEQUENCE |
|
|
|
|
mp7002NearEndRecent24HrIndex |
SCinstance |
|
|
mp7002NearEndRecent24HrStat |
OCTET STRING |
|
Mp7002FarEndCurrent15MinEntry |
|
SEQUENCE |
|
|
|
|
mp7002FarEndCurrent15MinIndex |
SCinstance |
|
|
mp7002FarEndCurrent15MinStat |
OCTET STRING |
|
Mp7002FarEndIntervalEntry |
|
SEQUENCE |
|
|
|
|
mp7002FarEndIntervalIndex |
SCinstance |
|
|
mp7002FarEndIntervalNumber |
INTEGER |
|
|
mp7002FarEndIntervalStat |
OCTET STRING |
|
Mp7002CurrentFarEnd24HrEntry |
|
SEQUENCE |
|
|
|
|
mp7002CurrentFarEnd24HrIndex |
SCinstance |
|
|
mp7002CurrentFarEnd24HrStat |
OCTET STRING |
|
Mp7002RecentFarEnd24HrEntry |
|
SEQUENCE |
|
|
|
|
mp7002RecentFarEnd24HrIndex |
SCinstance |
|
|
mp7002RecentFarEnd24HrStat |
OCTET STRING |
|
Mp7002UnavailableTimeRegEntry |
|
SEQUENCE |
|
|
|
|
mp7002UnavailableTimeRegIndex |
SCinstance |
|
|
mp7002UnavailableTimeRegNumber |
INTEGER |
|
|
mp7002UnavailableTimeRegStart |
INTEGER |
|
|
mp7002UnavailableTimeRegStop |
INTEGER |
|
Mp7002FarEndUnavailableTimeRegEntry |
|
SEQUENCE |
|
|
|
|
mp7002FarEndUnavailableTimeRegIndex |
SCinstance |
|
|
mp7002FarEndUnavailableTimeRegNumber |
INTEGER |
|
|
mp7002FarEndUnavailableTimeRegStart |
INTEGER |
|
|
mp7002FarEndUnavailableTimeRegStop |
INTEGER |
|
Mp7002NearEndAlarmConfigEntry |
|
SEQUENCE |
|
|
|
|
mp7002NearEndAlarmConfigIndex |
SCinstance |
|
|
mp7002NearEndAlarmConfigIdentifier |
OBJECT IDENTIFIER |
|
|
mp7002NearEndAlarmCountWindow |
INTEGER |
|
|
mp7002NearEndAlarmCountThreshold |
INTEGER |
|
Mp7002FarEndAlarmConfigEntry |
|
SEQUENCE |
|
|
|
|
mp7002FarEndAlarmConfigIndex |
SCinstance |
|
|
mp7002FarEndAlarmConfigIdentifier |
OBJECT IDENTIFIER |
|
|
mp7002FarEndAlarmCountWindow |
INTEGER |
|
|
mp7002FarEndAlarmCountThreshold |
INTEGER |
|
Mp7002LocalAlarmConfigEntry |
|
SEQUENCE |
|
|
|
|
mp7002LocalAlarmConfigIndex |
SCinstance |
|
|
mp7002UASNE |
INTEGER |
|
|
mp7002SESNE |
INTEGER |
|
|
mp7002BBENE |
INTEGER |
|
|
mp7002ESNE |
INTEGER |
|
|
mp7002UASFE |
INTEGER |
|
|
mp7002SESFE |
INTEGER |
|
|
mp7002BBEFE |
INTEGER |
|
|
mp7002ESFE |
INTEGER |
|
|
mp7002LOS |
INTEGER |
|
|
mp7002LOF |
INTEGER |
|
|
mp7002AIS |
INTEGER |
|
|
mp7002TmgLoss |
INTEGER |
|
|
mp7002LCVs |
INTEGER |
|
|
mp7002NtwkRAI |
INTEGER |
|
Defined Values
gdc |
1.3.6.1.4.1.498 |
OBJECT IDENTIFIER |
|
|
|
dsx1 |
1.3.6.1.4.1.498.6 |
OBJECT IDENTIFIER |
|
|
|
mp7002Maintenance |
1.3.6.1.4.1.498.6.6.2 |
OBJECT IDENTIFIER |
|
|
|
mp7002MIBversion |
1.3.6.1.4.1.498.6.6.1.1 |
Identifies the version of the MIB. The format of the version
is x.yzT, where 'x' identifies the major revision number, 'y'
identifies the minor revision number, 'z' identifies the
typographical revision, and T identifies the test revision.
Acceptable values for the individual revision components are
as follows:
x: 1 - 9
y: 0 - 9
z: 0 - 9
T: A - Z
Upon formal release, no designation for the test revision will
be present. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(5) |
|
mp7002VersionEntry |
1.3.6.1.4.1.498.6.6.1.2.1 |
An entry in the GDC Mp7002System Version Table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002VersionEntry |
|
|
mp7002VersionIndex |
1.3.6.1.4.1.498.6.6.1.2.1.1 |
This object identifies Version parameters associated
with the managed object. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002FirmwareRev |
1.3.6.1.4.1.498.6.6.1.2.1.2 |
The version number of the firmware, to allow products to know which
revision is installed. The released version number is sequenced from
--, A-, ... AA, ... ZZ. Test versions are numerical from 01 to 99. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(2) |
|
mp7002ModelNumber |
1.3.6.1.4.1.498.6.6.1.2.1.3 |
This variable is used to determine the type
of card family installed ex. MP7002. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
mp7002E1x |
1.3.6.1.4.1.498.6.6.1.2.1.4 |
Indicates if the E1X Cascade Interface is installed. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
installed(1), notPresent(2) |
|
mp7002MaintenanceTable |
1.3.6.1.4.1.498.6.6.2.1 |
The table describes the maintenance objects for
the unit and references the unit interface (cc = 00). |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Mp7002MaintenanceEntry |
|
mp7002MaintenanceEntry |
1.3.6.1.4.1.498.6.6.2.1.1 |
An entry in the GDC E1 Maintenance Table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002MaintenanceEntry |
|
|
mp7002MaintenanceLineIndex |
1.3.6.1.4.1.498.6.6.2.1.1.1 |
This object identifies Maintenance parameters associated
with the managed object. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002SoftReset |
1.3.6.1.4.1.498.6.6.2.1.1.2 |
Supports the action of soft resetting the unit. When this
object is set to reset(2), then the unit performs a soft
reset, whose meaning is specific to the type of unit being
managed. The value of norm(1) will be returned when
the reset is complete.
The value of norm(1) can not be set by management. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
norm(1), reset(2) |
|
mp7002SysUpTime |
1.3.6.1.4.1.498.6.6.2.1.1.3 |
This variable is used to report the elapsed system tick
time for conversion to real time at the controller and is
not related to the sysUpTime referenced in MIB-II.
Upon power-up of the unit, the elapsed time is cleared.
The elapsed time counter rolls over upon reaching the
maximum count. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
mp7002DefaultInit |
1.3.6.1.4.1.498.6.6.2.1.1.4 |
This is used to allow the NonVolatile Configuration to
be set to a factory default state. When this value is set to
factoryDefault(1) the unit will perform
a reset to make the default configuration take affect.
The value of normal(2) will be returned when the initialization
is complete.
The value of normal(2) can not be set by management. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), factoryDefault(2) |
|
mp7002ResetStats |
1.3.6.1.4.1.498.6.6.2.1.1.5 |
Supports the action of soft resetting the mp7002NearEndValidIntervals
object. When this object is set to reset(2), then the unit
will reset the mp7002NearEndValidIntervals object to zero.
The value of norm(1) can not be set by management. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
norm(1), reset(2) |
|
mp7002LedStatus |
1.3.6.1.4.1.498.6.6.2.1.1.6 |
Returns a bitwise snapshot of the front panel LED state.
Octet 1 bit 7 - not used
bit 6 - ON
bit 5 - INSV
bit 4 - RSP
bit 3 - TMG
bit 2 - NIU
bit 1 - D_I
bit 0 - future use
Octet 2 bit 7 - not used
bit 6 - future use
bit 5 - NTWK AIS
bit 4 - NTWK LCV
bit 3 - NTWK LOS
bit 2 - NTWK OOF
bit 1 - ALM
bit 0 - TM
Octet 3 bit 7 - not used
bit 6 - ST- future use
bit 5 - LT- future use
bit 4 - RL- future use
bit 3 - future use
bit 2 - future use
bit 1 - future use
bit 0 - future use |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(3) |
|
mp7002E1Circuit |
1.3.6.1.4.1.498.6.6.2.1.1.7 |
Circuit name E1 is connected to. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(16) |
|
mp7002E1XCircuit |
1.3.6.1.4.1.498.6.6.2.1.1.8 |
Circuit Name E1X is connected to |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(16) |
|
mp7002TSBundle1Name |
1.3.6.1.4.1.498.6.6.2.1.1.9 |
Name first Time Slot Bundle is assigned to. Only used when unit is
configured for drop side interface |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(16) |
|
mp7002TSBundle2Name |
1.3.6.1.4.1.498.6.6.2.1.1.10 |
Name second Time Slot Bundle is assigned to. Only used when unit is
configured for drop side interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(16) |
|
mp7002SetRealTime |
1.3.6.1.4.1.498.6.6.2.1.1.11 |
Number of seconds from midnight Dec 31, 1969. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
mp7002AlarmStatus |
1.3.6.1.4.1.498.6.6.2.1.1.12 |
Returns a bit-wise Status of alarms
Octet 1 bit 7 - not used
bit 6 - NWTK_LOS
bit 5 - NWTK_LOF
bit 4 - NWTK_AIS
bit 3 - NTWK_LCV
bit 2 - TIMING LOSS
bit 1 - NTWK_NE_ES
bit 0 - NTWK_NE_BBE
Octet 2 bit 7 - not used
bit 6 - NTWK_NE_SES
bit 5 - NTWK_NE_UAS
bit 4 - NTWK_FE_ES
bit 3 - NTWK_FE_BBE
bit 2 - NTWK_FE_SES
bit 1 - NTWK_FE_UAS
bit 0 - NTWK_RAI
Octet 3 bit 7 - not used
bit 6 - E1X_LOS
bit 5 - E1X_LOF
bit 4 - E1X_AIS
bit 3 - E1X_NE_ES
bit 2 - E1X_NE_BBE
bit 1 - E1X_NE_SES
bit 0 - E1X_NE_UAS
Octet 4 bit 7 - not used
bit 6 - E1X_FE_ES
bit 5 - E1X_FE_BBE
bit 4 - E1X_FE_SES
bit 3 - E1X_FE_UAS
bit 2 - NVRAM corrupted
bit 1 - unit failure
bit 0 - Power-up Alarm |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(4) |
|
mp7002SystemTimingGenStatus |
1.3.6.1.4.1.498.6.6.2.1.1.13 |
Indicates if the units configured for primary or secondary system clock are
actually supplying clock and if it is the 8hkz, 4mhz, or both. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), clk8khz(2), clk4mhz(3), clk8khzand4mhz(4) |
|
mp7002FarEndResetStats |
1.3.6.1.4.1.498.6.6.2.1.1.14 |
Supports the action of soft resetting the mp7002FarEndValidIntervals
object. When this object is set to reset(2), then the unit
will reset the mp7002FarEndValidIntervals object to zero.
The value of norm(1) can not be set by management. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
norm(1), reset(2) |
|
mp7002NearEndStatLastInitialized |
1.3.6.1.4.1.498.6.6.2.1.1.15 |
Number of seconds from midnight Dec 31, 1969 up until
mp7002NearEndValidIntervals was last initialized to zero |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
mp7002FarEndStatLastInitialized |
1.3.6.1.4.1.498.6.6.2.1.1.16 |
Number of seconds from midnight Dec 31, 1969 up until
mp7002FarEndValidIntervals was last initialized to zero |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
mp7002ConfigEntry |
1.3.6.1.4.1.498.6.6.3.1.1 |
The GDC E1 Configuration table entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002ConfigEntry |
|
|
mp7002ConfigIndex |
1.3.6.1.4.1.498.6.6.3.1.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002InterfaceType |
1.3.6.1.4.1.498.6.6.3.1.1.2 |
The operating mode of the interface to be either Network Side,
Drop Side or not assigned. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
diu(1), niu(2), notAssigned(3) |
|
mp7002RcvrRange |
1.3.6.1.4.1.498.6.6.3.1.1.3 |
Sets the receiver range to short (6dB) or long (36dB) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
short(1), long(2) |
|
mp7002TransmitClockSource |
1.3.6.1.4.1.498.6.6.3.1.1.4 |
Sets the transmit clock source. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
system(1), recovered(2), internal(3) |
|
mp7002FallbackClockSource |
1.3.6.1.4.1.498.6.6.3.1.1.5 |
Identifies the fallback transmit clock source. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
system(1), recovered(2), internal(3) |
|
mp7002FacilityDataLink |
1.3.6.1.4.1.498.6.6.3.1.1.6 |
Tok_String |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), active(2), notActive(3) |
|
mp7002NearEndValidIntervals |
1.3.6.1.4.1.498.6.6.3.1.1.7 |
The number of previous intervals for which
valid data was collected. The value will be 16
unless the interface was brought on-line within
the last 4 hours, in which case the value will
be the number of complete 15 minute intervals
the since interface has been online. This object
is only valid for the E1 interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..16 |
|
mp7002FarEndValidIntervals |
1.3.6.1.4.1.498.6.6.3.1.1.8 |
The number of previous intervals for which
valid data was collected. The value will be 16
unless the interface was brought on-line within
the last 4 hours, in which case the value will
be the number of complete 15 minute intervals
the since interface has been online. This object
is only valid for the E1 interface. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..16 |
|
mp7002NetworkConnection |
1.3.6.1.4.1.498.6.6.3.1.1.9 |
Sets whether the network interface is standby or
online.
This only applies to the Network Interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
onLine(1), standBy(2) |
|
mp7002Framing |
1.3.6.1.4.1.498.6.6.3.1.1.10 |
Set the framing for the interface.
Abbreviations are as follows:
CCS - common-channel signaling
PCS0 - per channel signaling phase 0
PCS1 - per channel signaling phase 1 |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
cCSwithoutCRC4(1), pCS0withoutCRC4(2), pCS1withoutCRC4(3), cCSwithCRC4(4), pCS0withCRC4(5), pCS1withCRC4(6) |
|
mp7002LineCoding |
1.3.6.1.4.1.498.6.6.3.1.1.11 |
Sets the line coding for the interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ami(1), hdb3(2) |
|
mp7002SysTimingTable |
1.3.6.1.4.1.498.6.6.7.1 |
The GDC System Timing table. These are unit options at the
system level. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Mp7002SysTimingEntry |
|
mp7002SysTimingEntry |
1.3.6.1.4.1.498.6.6.7.1.1 |
The GDC E1 Configuration table entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002SysTimingEntry |
|
|
mp7002SysTimingIndex |
1.3.6.1.4.1.498.6.6.7.1.1.1 |
Index value into the system configuration table. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002SysTimingGen |
1.3.6.1.4.1.498.6.6.7.1.1.2 |
Selects if the unit provides system timing.
none(1) - does not provide Timing Generator
primary(2) - unit is primary Timing Generator for the shelf.
secondary(3) - unit is secondary Timig Generator for the
shelf.
Only 1 unit in the shelf can the primary or secondary
timing generator. All other must be none. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), primary(2), secondary(3) |
|
mp7002DCCConfigurationEntry |
1.3.6.1.4.1.498.6.6.3.2.1 |
The GDC Diagnostic Configuration table entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002DCCConfigurationEntry |
|
|
mp7002TimeSlot |
1.3.6.1.4.1.498.6.6.3.2.1.2 |
Time Slot DCC goes in |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..31 |
|
mp7002Bandwidth |
1.3.6.1.4.1.498.6.6.3.2.1.3 |
Bandwidth to use:
8 kbps - bit 7 only
56 kbps - bits 0 - 6
64 kbps - all 8 bits |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
kbps8(1), kbps56(2), kbps64(3), notAssigned(4) |
|
mp7002HighwayAssignEntry |
1.3.6.1.4.1.498.6.6.7.2.1 |
The GDC E1 Highway Assign table entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002HighwayAssignEntry |
|
|
mp7002TimeSlotBundle |
1.3.6.1.4.1.498.6.6.7.2.1.2 |
Index for the bundle being assigned. A time slot bundle
can be assigned to 1 or 2 of the 4 backplane highways. Bundle 1 is asigned in
the Aggregate starting at Time Slot 1. Bundle 2 starts at the next available Time
Slot. If only one bundle is needed, it must be bundle 1. The execute object
should be sent only after acknowlegement of al assignment PDUs. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
bundle1(1), bundle2(2) |
|
mp7002StartTimeSlot |
1.3.6.1.4.1.498.6.6.7.2.1.3 |
Starting time slot of the bundle. If only 1 bundle is
being assigned, or the first of 2 is being assigned,
it must start at 1. The second of 2 must start at the next
available time slot after the first bundle. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..31 |
|
mp7002NumberOfTimeSlots |
1.3.6.1.4.1.498.6.6.7.2.1.4 |
Number of time slots assigned to the bundle. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..31 |
|
mp7002BundleDestination |
1.3.6.1.4.1.498.6.6.7.2.1.5 |
Defines the destination of the bundle. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notAssigned(1), highway1(2), highway2(3), highway3(4), highway4(5) |
|
mp7002ExecuteAssign |
1.3.6.1.4.1.498.6.6.7.2.1.6 |
Causes the MP7002 to execute configuration of the assigned
highway configuration. This object should be sent in a separate
PDU after acknowlegement of the assign PDU(s) has been recieved. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), execute(2) |
|
mp7002DiagTable |
1.3.6.1.4.1.498.6.6.4.1 |
The GDC E1 Diagnostics table. Information in the entries of
this table support diagnostics testing via loopbacks.
Diagnostics are only supported when mp7002InterfaceType is set
to niu(2). This table applies to the Network Interface only. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Mp7002DiagEntry |
|
mp7002DiagEntry |
1.3.6.1.4.1.498.6.6.4.1.1 |
The GDC E1 Diagnostics table entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002DiagEntry |
|
|
mp7002DiagIndex |
1.3.6.1.4.1.498.6.6.4.1.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002TestPattern |
1.3.6.1.4.1.498.6.6.4.1.1.2 |
Test pattern for tests that use the pattern generator.
The value of this object is used when
mp7002DiagConfig.unitTest(5) or mp7002DiagConfig.patGenOn(6)
is selected.
NOT SUPPORTED BY THE MP7002. |
Status: obsolete |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noCode(1), pat511(2), pat2047(3), pat1in4(4) |
|
mp7002DiagConfig |
1.3.6.1.4.1.498.6.6.4.1.1.3 |
Selects the test to run. noLoop(1) ends the test.
Interoperates with mp7002TestPattern. When unitTest(2) or
patGenOn(3) is selected, the pattern in mp7002TestPattern
is used.
payloadLoopback(4) and lineLoopback(5) are only valid when
the unit is configured for a Network Side interface.
localTest(6) is only valid when the unit is configured for
a Drop Side interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noLoop(1), lineLoopback(2), payloadLoopback(3), localTest(4), unitTest(5), patGenOn(6) |
|
mp7002TestLimit |
1.3.6.1.4.1.498.6.6.4.1.1.4 |
Selects the duration to run a diagnostic test. The value(1)
noLimit signifies that the test should run indefinitely until
explicitly terminated.
Default value: testTime10Mins(1) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
testTime10Mins(1), testTime20Mins(2), noLimit(3) |
|
mp7002TestExecutionStatus |
1.3.6.1.4.1.498.6.6.4.1.1.5 |
This variable reports the status of a test. notInTest(1) indicates
a test is not running. testInProgress(2) indicates that a test is
currently running. testCompleted(4) indicates that a test has run
and is completed. testCompletedNotInTest(5) indicates that a test has
completed and it is no longer in test. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
notInTest(1), testInProgress(2), testCompleted(4), testCompletedNotInTest(5) |
|
mp7002TestExceptions |
1.3.6.1.4.1.498.6.6.4.1.1.6 |
Indicates exceptions that have occurred that may affect
interpretation of the test results.
The value of this object is a sum. This sum initially take
the value zero. Then, for each exception, the value
associated with the exception is added to the sum.
The exception values are:
value exception
1 a timed test was preempted so the result
cannot be viewed in relation to the test
duration
2 the results overflowed so the result cannot be
viewed as an absolute value
4 the test was performed while synchronization
could not be performed so the result may not
be accurate. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
mp7002TestResults |
1.3.6.1.4.1.498.6.6.4.1.1.7 |
The results of the last diagnostic test. This can be the
current test running or the last completed test.
Note that the interpretation of these results may be affected
by the value of the mp7002TestExceptions object.
Not supported by MP7002 since no pattern generating tests
are supported. |
Status: obsolete |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..1048576 |
|
mp7002ResetTestResults |
1.3.6.1.4.1.498.6.6.4.1.1.8 |
Resets the diagnostic error count.
Not supported by MP7002 since no pattern generating tests
are supported. |
Status: obsolete |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
norm(1), reset(2) |
|
mp7002NearEndCurrent15MinEntry |
1.3.6.1.4.1.498.6.6.5.1.1 |
An entry in the mp7002 NearEnd Current table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002NearEndCurrent15MinEntry |
|
|
mp7002NearEndCurrent15MinIndex |
1.3.6.1.4.1.498.6.6.5.1.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002NearEndCurrent15MinStat |
1.3.6.1.4.1.498.6.6.5.1.1.2 |
Returns a bitwise snapshot of the current 15Min statistics.
1.7 f/u
1.6 f/u
1.5 f/u
1.4 f/u
1.3 f/u
1.2 2^9 ES
.
1.0 2^7
2.7 f/u
2.6 2^6
.
2.0 2^0
3.7 f/u
3.6 f/u
3.5 f/u
3.4 f/u
3.3 f/u
3.2 2^9 SES
.
3.0 2^7
4.7 f/u
4.6 2^6 SES
.
4.0 2^0
5.7 f/u
5.6 f/u
5.5 f/u
5.4 f/u
5.3 f/u
5.2 Counter Overflow (>65535) BBE
5.1 2^15
5.0 2^14
6.7 f/u
6.6 2^13 BBE
.
6.0 2^7
7.7 f/u
7.6 2^6 BBE
.
7.0 2^0
8.7 f/u
8.6 f/u
8.5 f/u
8.4 f/u
8.3 f/u
8.2 2^9 UAS
.
8.0 2^7
9.7 f/u
9.6 2^6 UAS
.
9.0 2^0
10.7 f/u
10.6 f/u
10.5 f/u
10.4 f/u
10.3 f/u
10.2 Counter Overflow (>65535) LCV
10.1 2^15
10.0 2^14
11.7 f/u
11.6 2^13 LCV
.
11.0 2^7
12.7 f/u
12.6 2^6 LCV
.
12.0 2^0
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(12) |
|
mp7002NearEndIntervalEntry |
1.3.6.1.4.1.498.6.6.5.2.1 |
An entry in the E1 Interval table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002NearEndIntervalEntry |
|
|
mp7002NearEndIntervalIndex |
1.3.6.1.4.1.498.6.6.5.2.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002NearEndIntervalNumber |
1.3.6.1.4.1.498.6.6.5.2.1.2 |
The number of Errored Seconds encountered by an E1
interface in one of the previous 16, individual 15 minute,
intervals. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..16 |
|
mp7002NearEndIntervalStat |
1.3.6.1.4.1.498.6.6.5.2.1.3 |
Returns a bitwise map of the
interface in one of the previous 16, individual 15 minute,
intervals.
1.7 f/u
1.6 f/u
1.5 f/u
1.4 f/u
1.3 f/u
1.2 2^9 ES
.
1.0 2^7
2.7 f/u
2.6 2^6
.
2.0 2^0
3.7 f/u
3.6 f/u
3.5 f/u
3.4 f/u
3.3 f/u
3.2 2^9 SES
.
3.0 2^7
4.7 f/u
4.6 2^6 SES
.
4.0 2^0
5.7 f/u
5.6 f/u
5.5 f/u
5.4 f/u
5.3 f/u
5.2 Counter Overflow (>65535) BBE
5.1 2^15
5.0 2^14
6.7 f/u
6.6 2^13 BBE
.
6.0 2^7
7.7 f/u
7.6 2^6 BBE
.
7.0 2^0
8.7 f/u
8.6 f/u
8.5 f/u
8.4 f/u
8.3 f/u
8.2 2^9 UAS
.
8.0 2^7
9.7 f/u
9.6 2^6 UAS
.
9.0 2^0
10.7 f/u
10.6 f/u
10.5 f/u
10.4 f/u
10.3 f/u
10.2 Counter Overflow (>65535) LCV
10.1 2^15
10.0 2^14
11.7 f/u
11.6 2^13 LCV
.
11.0 2^7
12.7 f/u
12.6 2^6 LCV
.
12.0 2^0
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(12) |
|
mp7002NearEndCurrent24HrEntry |
1.3.6.1.4.1.498.6.6.5.3.1 |
An entry in the E1 Total table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002NearEndCurrent24HrEntry |
|
|
mp7002NearEndCurrent24HrIndex |
1.3.6.1.4.1.498.6.6.5.3.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002NearEndCurrent24HrStat |
1.3.6.1.4.1.498.6.6.5.3.1.2 |
Returns a bitwise map of the current 24 hour table
1.7 f/u
1.6 f/u
1.5 f/u
1.4 f/u
1.3 f/u
1.2 1: Counter Overflow (>65535) ES
1.1 2^15
1.0 2^14
2.7 f/u
2.6 2^13 ES
.
2.0 2^7
3.7 f/u
3.6 2^6 ES
.
3.0 2^0
4.7 f/u
4.6 f/u
4.5 f/u
4.4 f/u
4.3 f/u
4.2 1: Counter Overflow (>65535) SES
4.1 2^15
4.0 2^14
5.7 f/u
5.6 2^13 SES
.
5.0 2^7
6.7 f/u
6.6 2^6 SES
.
6.0 2^0
7.7 f/u
7.6 f/u
7.5 f/u
7.4 f/u
7.3 f/u
7.2 1: Counter Overflow (>65535) BBE
7.1 2^15
7.0 2^14
8.7 f/u
8.6 2^13 BBE
.
8.0 2^7
9.7 f/u
9.6 2^6 BBE
.
9.0 2^0
10.7 f/u
10.6 f/u
10.5 f/u
10.4 f/u
10.3 f/u
10.2 1: Counter Overflow (>65535) UAS
10.1 2^15
10.0 2^14
11.7 f/u
11.6 2^13 UAS
.
11.0 2^7
12.7 f/u
12.6 2^6 UAS
.
12.0 2^0
13.7 f/u
13.6 f/u
13.5 f/u
13.4 f/u
13.3 f/u
13.2 1: Counter Overflow (>65535) LCV
13.1 2^15
13.0 2^14
14.7 f/u
14.6 2^13 LCV
.
14.0 2^7
15.7 f/u
15.6 2^6 LCV
.
15.0 2^0
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(15) |
|
mp7002NearEndRecent24HrEntry |
1.3.6.1.4.1.498.6.6.5.4.1 |
An entry in the E1 Total table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002NearEndRecent24HrEntry |
|
|
mp7002NearEndRecent24HrIndex |
1.3.6.1.4.1.498.6.6.5.4.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002NearEndRecent24HrStat |
1.3.6.1.4.1.498.6.6.5.4.1.2 |
Returns a bitwise map of the current 24 hour table
1.7 f/u
1.6 f/u
1.5 f/u
1.4 f/u
1.3 f/u
1.2 1: Counter Overflow (>65535) ES
1.1 2^15
1.0 2^14
2.7 f/u
2.6 2^13 ES
.
2.0 2^7
3.7 f/u
3.6 2^6 ES
.
3.0 2^0
4.7 f/u
4.6 f/u
4.5 f/u
4.4 f/u
4.3 f/u
4.2 1: Counter Overflow (>65535) SES
4.1 2^15
4.0 2^14
5.7 f/u
5.6 2^13 SES
.
5.0 2^7
6.7 f/u
6.6 2^6 SES
.
6.0 2^0
7.7 f/u
7.6 f/u
7.5 f/u
7.4 f/u
7.3 f/u
7.2 1: Counter Overflow (>65535) BBE
7.1 2^15
7.0 2^14
8.7 f/u
8.6 2^13 BBE
.
8.0 2^7
9.7 f/u
9.6 2^6 BBE
.
9.0 2^0
10.7 f/u
10.6 f/u
10.5 f/u
10.4 f/u
10.3 f/u
10.2 1: Counter Overflow (>65535) UAS
10.1 2^15
10.0 2^14
11.7 f/u
11.6 2^13 UAS
.
11.0 2^7
12.7 f/u
12.6 2^6 UAS
.
12.0 2^0
13.7 f/u
13.6 f/u
13.5 f/u
13.4 f/u
13.3 f/u
13.2 1: Counter Overflow (>65535) LCV
13.1 2^15
13.0 2^14
14.7 f/u
14.6 2^13 LCV
.
14.0 2^7
15.7 f/u
15.6 2^6 LCV
.
15.0 2^0
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(15) |
|
mp7002FarEndCurrent15MinEntry |
1.3.6.1.4.1.498.6.6.5.5.1 |
An entry in the mp7002FarEnd Current 15 Minute table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002FarEndCurrent15MinEntry |
|
|
mp7002FarEndCurrent15MinIndex |
1.3.6.1.4.1.498.6.6.5.5.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002FarEndCurrent15MinStat |
1.3.6.1.4.1.498.6.6.5.5.1.2 |
Returns a bitwise map of the far end
interface in one of the previous 16, individual 15 minute,
intervals.
1.7 f/u
1.6 f/u
1.5 f/u
1.4 f/u
1.3 f/u
1.2 2^9 ES
.
1.0 2^7
2.7 f/u
2.6 2^6
.
2.0 2^0
3.7 f/u
3.6 f/u
3.5 f/u
3.4 f/u
3.3 f/u
3.2 2^9 SES
.
3.0 2^7
4.7 f/u
4.6 2^6 SES
.
4.0 2^0
5.7 f/u
5.6 f/u
5.5 f/u
5.4 f/u
5.3 f/u
5.2 Counter Overflow (>65535) BBE
5.1 2^15
5.0 2^14
6.7 f/u
6.6 2^13 BBE
.
6.0 2^7
7.7 f/u
7.6 2^6 BBE
.
7.0 2^0
8.7 f/u
8.6 f/u
8.5 f/u
8.4 f/u
8.3 f/u
8.2 2^9 UAS
.
8.0 2^7
9.7 f/u
9.6 2^6 UAS
.
9.0 2^0
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(9) |
|
mp7002FarEndIntervalEntry |
1.3.6.1.4.1.498.6.6.5.6.1 |
An entry in the Interval table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002FarEndIntervalEntry |
|
|
mp7002FarEndIntervalIndex |
1.3.6.1.4.1.498.6.6.5.6.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002FarEndIntervalNumber |
1.3.6.1.4.1.498.6.6.5.6.1.2 |
A number between 1 and 16, where 1 is the most recently completed
15 minute interval and 16 is the least recently completed 15 minutes
interval (assuming that all 16 intervals are valid). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..16 |
|
mp7002FarEndIntervalStat |
1.3.6.1.4.1.498.6.6.5.6.1.3 |
Returns a bitwise map of statistics for the far end
interface in the current 15 minute interval.
1.7 f/u
1.6 f/u
1.5 f/u
1.4 f/u
1.3 f/u
1.2 2^9 ES
.
1.0 2^7
2.7 f/u
2.6 2^6
.
2.0 2^0
3.7 f/u
3.6 f/u
3.5 f/u
3.4 f/u
3.3 f/u
3.2 2^9 SES
.
3.0 2^7
4.7 f/u
4.6 2^6 SES
.
4.0 2^0
5.7 f/u
5.6 f/u
5.5 f/u
5.4 f/u
5.3 f/u
5.2 Counter Overflow (>65535) BBE
5.1 2^15
5.0 2^14
6.7 f/u
6.6 2^13 BBE
.
6.0 2^7
7.7 f/u
7.6 2^6 BBE
.
7.0 2^0
8.7 f/u
8.6 f/u
8.5 f/u
8.4 f/u
8.3 f/u
8.2 2^9 UAS
.
8.0 2^7
9.7 f/u
9.6 2^6 UAS
.
9.0 2^0
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(9) |
|
mp7002CurrentFarEnd24HrEntry |
1.3.6.1.4.1.498.6.6.5.7.1 |
An entry in the Current 24 Hr table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002CurrentFarEnd24HrEntry |
|
|
mp7002CurrentFarEnd24HrIndex |
1.3.6.1.4.1.498.6.6.5.7.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002CurrentFarEnd24HrStat |
1.3.6.1.4.1.498.6.6.5.7.1.2 |
Returns a bitwise map of statistics for the
interface in the current 24 hour interval.
1.7 f/u
1.6 f/u
1.5 f/u
1.4 f/u
1.3 f/u
1.2 1: Counter Overflow (>65535) ES
1.1 2^15
1.0 2^14
2.7 f/u
2.6 2^13 ES
.
2.0 2^7
3.7 f/u
3.6 2^6 ES
.
3.0 2^0
4.7 f/u
4.6 f/u
4.5 f/u
4.4 f/u
4.3 f/u
4.2 1: Counter Overflow (>65535) SES
4.1 2^15
4.0 2^14
5.7 f/u
5.6 2^13 SES
.
5.0 2^7
6.7 f/u
6.6 2^6 SES
.
6.0 2^0
7.7 f/u
7.6 f/u
7.5 f/u
7.4 f/u
7.3 f/u
7.2 1: Counter Overflow (>65535) BBE
7.1 2^15
7.0 2^14
8.7 f/u
8.6 2^13 BBE
.
8.0 2^7
9.7 f/u
9.6 2^6 BBE
.
9.0 2^0
10.7 f/u
10.6 f/u
10.5 f/u
10.4 f/u
10.3 f/u
10.2 1: Counter Overflow (>65535) UAS
10.1 2^15
10.0 2^14
11.7 f/u
11.6 2^13 UAS
.
11.0 2^7
12.7 f/u
12.6 2^6 UAS
.
12.0 2^0
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(12) |
|
mp7002RecentFarEnd24HrEntry |
1.3.6.1.4.1.498.6.6.5.8.1 |
An entry in the Recent 24 Hr table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002RecentFarEnd24HrEntry |
|
|
mp7002RecentFarEnd24HrIndex |
1.3.6.1.4.1.498.6.6.5.8.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002RecentFarEnd24HrStat |
1.3.6.1.4.1.498.6.6.5.8.1.2 |
Returns a bitwise map of statistics for the
interface in the Recent 24 hour interval.
1.7 f/u
1.6 f/u
1.5 f/u
1.4 f/u
1.3 f/u
1.2 1: Counter Overflow (>65535) ES
1.1 2^15
1.0 2^14
2.7 f/u
2.6 2^13 ES
.
2.0 2^7
3.7 f/u
3.6 2^6 ES
.
3.0 2^0
4.7 f/u
4.6 f/u
4.5 f/u
4.4 f/u
4.3 f/u
4.2 1: Counter Overflow (>65535) SES
4.1 2^15
4.0 2^14
5.7 f/u
5.6 2^13 SES
.
5.0 2^7
6.7 f/u
6.6 2^6 SES
.
6.0 2^0
7.7 f/u
7.6 f/u
7.5 f/u
7.4 f/u
7.3 f/u
7.2 1: Counter Overflow (>65535) BBE
7.1 2^15
7.0 2^14
8.7 f/u
8.6 2^13 BBE
.
8.0 2^7
9.7 f/u
9.6 2^6 BBE
.
9.0 2^0
10.7 f/u
10.6 f/u
10.5 f/u
10.4 f/u
10.3 f/u
10.2 1: Counter Overflow (>65535) UAS
10.1 2^15
10.0 2^14
11.7 f/u
11.6 2^13 UAS
.
11.0 2^7
12.7 f/u
12.6 2^6 UAS
.
12.0 2^0
|
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(12) |
|
mp7002UnavailableTimeRegEntry |
1.3.6.1.4.1.498.6.6.5.9.1 |
An entry in the Unavailable Time Register table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002UnavailableTimeRegEntry |
|
|
mp7002UnavailableTimeRegIndex |
1.3.6.1.4.1.498.6.6.5.9.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002UnavailableTimeRegNumber |
1.3.6.1.4.1.498.6.6.5.9.1.2 |
A number between 1 and 6, where the number is the number of the
Unavailable Time Register. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..6 |
|
mp7002UnavailableTimeRegStart |
1.3.6.1.4.1.498.6.6.5.9.1.3 |
Start time of one of the Unavailable Time Registers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
mp7002UnavailableTimeRegStop |
1.3.6.1.4.1.498.6.6.5.9.1.4 |
Stop time of one of the Unavailable Time Registers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
mp7002FarEndUnavailableTimeRegEntry |
1.3.6.1.4.1.498.6.6.5.10.1 |
An entry in the Unavailable Time Register table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002FarEndUnavailableTimeRegEntry |
|
|
mp7002FarEndUnavailableTimeRegIndex |
1.3.6.1.4.1.498.6.6.5.10.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface.
Interface can be Network or, when supported, E1X. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002FarEndUnavailableTimeRegNumber |
1.3.6.1.4.1.498.6.6.5.10.1.2 |
A number between 1 and 6, where the number is the number of the
Unavailable Time Register. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..6 |
|
mp7002FarEndUnavailableTimeRegStart |
1.3.6.1.4.1.498.6.6.5.10.1.3 |
Start time of one of the Unavailable Time Registers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
mp7002FarEndUnavailableTimeRegStop |
1.3.6.1.4.1.498.6.6.5.10.1.4 |
Stop time of one of the Unavailable Time Registers. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2147483647 |
|
mp7002LCV |
1.3.6.1.4.1.498.6.9.1.7 |
OBJECT IDENTIFIER |
|
|
|
mp7002NEES |
1.3.6.1.4.1.498.6.9.1.11 |
OBJECT IDENTIFIER |
|
|
|
mp7002FEES |
1.3.6.1.4.1.498.6.9.1.15 |
OBJECT IDENTIFIER |
|
|
|
mp7002RAI |
1.3.6.1.4.1.498.6.9.1.19 |
OBJECT IDENTIFIER |
|
|
|
mp7002NearEndAlarmConfigTable |
1.3.6.1.4.1.498.6.9.2 |
The mp7002NearEndAlarmConfigTable contains entries that configure alarm
reporting. The structure of the table is such that alarm
configuration is supported on a unit and interface basis, and
then on an alarm type basis within the interface. For
simplicity sake alarms, be they unit or interface
related, are represented in one table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Mp7002NearEndAlarmConfigEntry |
|
mp7002NearEndAlarmConfigEntry |
1.3.6.1.4.1.498.6.9.2.1 |
An entry in the MP7002 Alarm Configuration table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002NearEndAlarmConfigEntry |
|
|
mp7002NearEndAlarmConfigIndex |
1.3.6.1.4.1.498.6.9.2.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002NearEndAlarmConfigIdentifier |
1.3.6.1.4.1.498.6.9.2.1.2 |
The unique alarm identifier assigned to this alarm type.
The format of this identifier is an OBJECT IDENTIFIER that has
the following format: {iso(1) org(3) dod(6) internet(1)
private(4) enterprises(1) gdc(498) xxx(x) alarm(z) yyy(y)
where xxx(x) is the administratively assigned family object
identifier (z) is the object identifier for alarms in the family
defined MIB and yyy(y) is the administratively assigned alarm
type identifier for this alarm. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
mp7002NearEndAlarmCountWindow |
1.3.6.1.4.1.498.6.9.2.1.3 |
This variable sets/reads the alarm window.
This window is used with the alarm threshold to determine
how long the alarm should be active before reporting.
Default: disabled(1) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), last1sec(2), last10sec(3), last30sec(4), last1min(5), last15min(6), last1hr(7), last24hr(8), infinite(9) |
|
mp7002NearEndAlarmCountThreshold |
1.3.6.1.4.1.498.6.9.2.1.4 |
This function sets/reads the alarm threshold criteria.
This threshold is used along with the the alarm window to
determine the number of instances in a given time frame for
an alarm to occur before the alarm is considered active.
Default: thresGT1(1) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
thresGT1(1), thresGT3(2), thresGT10(3), thresGT100(4), thresGT1000(5), thresGT10000(6) |
|
mp7002FarEndAlarmConfigTable |
1.3.6.1.4.1.498.6.9.3 |
The mp7002FarEndAlarmConfigTable contains entries that configure alarm
reporting. The structure of the table is such that alarm
configuration is supported on a unit and interface basis, and
then on an alarm type basis within the interface. For
simplicity sake alarms, be they unit or interface
related, are represented in one table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Mp7002FarEndAlarmConfigEntry |
|
mp7002FarEndAlarmConfigEntry |
1.3.6.1.4.1.498.6.9.3.1 |
An entry in the MP7002 Alarm Configuration table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002FarEndAlarmConfigEntry |
|
|
mp7002FarEndAlarmConfigIndex |
1.3.6.1.4.1.498.6.9.3.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002FarEndAlarmConfigIdentifier |
1.3.6.1.4.1.498.6.9.3.1.2 |
The unique alarm identifier assigned to this alarm type.
The format of this identifier is an OBJECT IDENTIFIER that has
the following format: {iso(1) org(3) dod(6) internet(1)
private(4) enterprises(1) gdc(498) xxx(x) alarm(z) yyy(y)
where xxx(x) is the administratively assigned family object
identifier (z) is the object identifier for alarms in the family
defined MIB and yyy(y) is the administratively assigned alarm
type identifier for this alarm. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
mp7002FarEndAlarmCountWindow |
1.3.6.1.4.1.498.6.9.3.1.3 |
This variable sets/reads the alarm window.
This window is used with the alarm threshold to determine
how long the alarm should be active before reporting.
Default: disabled(1) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), last1sec(2), last10sec(3), last30sec(4), last1min(5), last15min(6), last1hr(7), last24hr(8), infinite(9) |
|
mp7002FarEndAlarmCountThreshold |
1.3.6.1.4.1.498.6.9.3.1.4 |
This function sets/reads the alarm threshold criteria.
This threshold is used along with the the alarm window to
determine the number of instances in a given time frame for
an alarm to occur before the alarm is considered active.
Default: thresGT1(1) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
thresGT1(1), thresGT3(2), thresGT10(3), thresGT100(4), thresGT1000(5), thresGT10000(6) |
|
mp7002LocalAlarmConfigTable |
1.3.6.1.4.1.498.6.9.4 |
The mp7002LocalAlarmConfigTable contains entries that configure
alarm
reporting. The structure of the table is such that alarm
configuration is supported on a unit and interface basis, and
then on an alarm type basis within the interface. For
simplicity sake alarms, be they unit or interface
related, are represented in one table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
Mp7002LocalAlarmConfigEntry |
|
mp7002LocalAlarmConfigEntry |
1.3.6.1.4.1.498.6.9.4.1 |
An entry in the GDC Local Alarm Configuration table. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Mp7002LocalAlarmConfigEntry |
|
|
mp7002LocalAlarmConfigIndex |
1.3.6.1.4.1.498.6.9.4.1.1 |
The index value which uniquely identifies the interface to
which this entry is applicable. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SCinstance |
|
|
mp7002UASNE |
1.3.6.1.4.1.498.6.9.4.1.2 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002SESNE |
1.3.6.1.4.1.498.6.9.4.1.3 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002BBENE |
1.3.6.1.4.1.498.6.9.4.1.4 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002ESNE |
1.3.6.1.4.1.498.6.9.4.1.5 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002UASFE |
1.3.6.1.4.1.498.6.9.4.1.6 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002SESFE |
1.3.6.1.4.1.498.6.9.4.1.7 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002BBEFE |
1.3.6.1.4.1.498.6.9.4.1.8 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002ESFE |
1.3.6.1.4.1.498.6.9.4.1.9 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002LOS |
1.3.6.1.4.1.498.6.9.4.1.10 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002LOF |
1.3.6.1.4.1.498.6.9.4.1.11 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002AIS |
1.3.6.1.4.1.498.6.9.4.1.12 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002TmgLoss |
1.3.6.1.4.1.498.6.9.4.1.13 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002LCVs |
1.3.6.1.4.1.498.6.9.4.1.14 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|
mp7002NtwkRAI |
1.3.6.1.4.1.498.6.9.4.1.15 |
Disables or enables the alarm on the Major buss or Minor
buss. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabledMajor(2), enabledMinor(3) |
|