GBNPlatformGNLink-MIB

File: GBNPlatformGNLink-MIB.mib (43518 bytes)

Imported modules

SNMPv2-SMI	RFC1213-MIB	Q-BRIDGE-MIB
SNMPv2-TC	SNMPv2-CONF	ADMIN-MASTER-MIB

Imported symbols

MODULE-IDEntry	OBJECT-TYPE	Integer32
IpAddress	Counter32	Counter64
Unsigned32	NOTIFICATION-TYPE	DisplayString
PortList	MacAddress	RowStatus
TruthValue	MODULE-COMPLIANCE	OBJECT-GROUP
gbnPlatform

Defined Types

GbnGgmpLsProEntry
SEQUENCE
	ggmplanMAC	MacAddress
	ggmplanswitchName	DisplayString	Size(1..255)
	ggmplanDeviceId	Integer32
	ggmplanInServerPort	Integer32
	ggmplanPortNumber	Integer32
	ggmplanStatus	Integer32
	ggmplanupportsep	Integer32
	ggmppvidrangestart	Integer32
	ggmplanlocation	Integer32
	ggmplanBSF	Integer32
	ggmpclientver	Integer32
	ggmplanManageVlanId	Integer32
	ggmplanGrnStp	Integer32
	ggmplanHostVer	DisplayString	Size(1..25)
	ggmplanOnlineTime	Integer32
	ggmplanVlanMode	Integer32
	ggmplanMacLearningMode	Integer32
	ggmplanHardwareVersion	Integer32
	ggmplanBootVer	DisplayString	Size(1..25)
	ggmplanDeviceName	DisplayString	Size(1..32)

GbnGgmpPortPropertyEntry
SEQUENCE
	ggmpportmac	MacAddress
	ggmpportportnumber	Integer32
	ggmpportportclosed	Integer32
	ggmpportportlink	Integer32
	ggmpportportvlanid	Integer32
	ggmpportporttagged	Integer32
	ggmpportportduplex	Integer32
	ggmpportportactualduplex	Integer32
	ggmpportportlockmac	Integer32
	ggmpportportgrnstp	Integer32

GbnGgmpVlanPropertyEntry
SEQUENCE
	ggmpvlanmac	MacAddress
	ggmpvlanvlanid	Integer32
	ggmpvlanname	DisplayString	Size(1..32)
	ggmpvlanstatic	Integer32
	ggmpvlanmembermap	PortList
	ggmpvlanuntaggedmap	PortList
	ggmpvlanaddportmap	PortList
	ggmpvlandelportmap	PortList
	ggmpvlanrowstatus	RowStatus
	ggmpvlanaddtagportmap	PortList
	ggmpvlanadduntagportmap	PortList

GbnGgmpLsSaveEntry
SEQUENCE
	ggmpsaveMAC	MacAddress
	ggmpsaveStatus	Integer32
	ggmprebootStatus	Integer32
	ggmpresetStatus	Integer32
	ggmpSyncLswProperty	Integer32
	ggmpSyncPortTable	Integer32
	ggmpSyncVlanTable	Integer32
	ggmpAllPortTag	PortList
	ggmpAllPortUntag	PortList

GbnGgmpLsARLEntry
SEQUENCE
	ggmparllanMAC	MacAddress
	ggmparllanarlMAC	MacAddress
	ggmpmac2port	Integer32

GgmpDevClientAppEntry
SEQUENCE
	ggmpDevTypeNum	INTEGER
	ggmpRmtLoadAppType	INTEGER
	ggmpDevAppName	DisplayString	Size(1..64)

GgmpDevRmtLoadEntry
SEQUENCE
	ggmpRmtLoadDevMac	MacAddress
	ggmpRmtLoadQueIn	INTEGER
	ggmplanRmtLoadPercent	INTEGER
	ggmplanRmtLoadTime	INTEGER
	ggmplanRmtLoadAppType	INTEGER
	ggmplanRmtLoadRowStatus	RowStatus

GgmpRmtLoadModeEntry
SEQUENCE
	ggmpRmtLoadDevType	INTEGER
	ggmpRmtLoadmode	INTEGER
	ggmpRmtLoadModeTime	INTEGER
	ggmpRmtLoadNewRegAuto	INTEGER
	ggmpRmtLoadModeRowStatus	RowStatus

GgmpGbnDeviceIdEntry
SEQUENCE
	ggmpGbnDevIdIndex	INTEGER
	ggmpGbnDeviceId	INTEGER
	ggmpGbnDeviceDesc	DisplayString	Size(1..32)
	ggmpGbnDeviceIDRowStatus	RowStatus
	ggmpGbnDevLowMidHighType	INTEGER

Defined Values

gnlinkMib		1.3.6.1.4.1.13464.1.2.1.2
ADMIN ZY.Link Enterprise MIB definition.
MODULE-IDENTITY

gbnGgmpSvrProperty		1.3.6.1.4.1.13464.1.2.1.2.7
OBJECT IDENTIFIER

gbnGgmpClientProperty		1.3.6.1.4.1.13464.1.2.1.2.14
OBJECT IDENTIFIER

gbnGgmpTrap		1.3.6.1.4.1.13464.1.2.1.2.9
OBJECT IDENTIFIER

ggmpStatus		1.3.6.1.4.1.13464.1.2.1.2.1
ggmp status
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disablepacketdiscard(2), disablepacketforwardnolocation(4)

ggmpRole		1.3.6.1.4.1.13464.1.2.1.2.2
ggmp lanswitch role
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	client(1), server(2), null(255)

gbnGgmpLsProTable		1.3.6.1.4.1.13464.1.2.1.2.3
A Table of Lanswitch property table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GbnGgmpLsProEntry

gbnGgmpLsProEntry		1.3.6.1.4.1.13464.1.2.1.2.3.1
A list of Lanswitch property parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	GbnGgmpLsProEntry

ggmplanMAC		1.3.6.1.4.1.13464.1.2.1.2.3.1.1
MAC address of the regist lanswtich
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

ggmplanswitchName		1.3.6.1.4.1.13464.1.2.1.2.3.1.2
name of the registered lanswtich .
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..255)

ggmplanDeviceId		1.3.6.1.4.1.13464.1.2.1.2.3.1.3
Device ID of the regist lanswtich , the highest byte of device id means device type , 2 means TiNet s2008, 3 means TiNet s2016, 4 means TiNet s3024.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmplanInServerPort		1.3.6.1.4.1.13464.1.2.1.2.3.1.4
The port which the lanswith regist in server
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmplanPortNumber		1.3.6.1.4.1.13464.1.2.1.2.3.1.5
The ports number of regist lanswitch
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmplanStatus		1.3.6.1.4.1.13464.1.2.1.2.3.1.6
The status of regist lanswitch
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	lsError(0), lsNormal(1), lsRegister(2), lsNull(255)

ggmplanupportsep		1.3.6.1.4.1.13464.1.2.1.2.3.1.7
The status of regist lanswitch. If lanswitch is in error status, the return value will be -1.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ggmppvidrangestart		1.3.6.1.4.1.13464.1.2.1.2.3.1.8
The start of pvid range of TiNet S2016E/S2024E. If lanswitch is in error status, the return value will be -1.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ggmplanlocation		1.3.6.1.4.1.13464.1.2.1.2.3.1.9
The location of the lanswitch
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmplanBSF		1.3.6.1.4.1.13464.1.2.1.2.3.1.10
Broadcast storm filter value of the lanswitch. If lanswitch is in error status, the return value will be -1.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ggmpclientver		1.3.6.1.4.1.13464.1.2.1.2.3.1.11
ggmp client software version
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmplanManageVlanId		1.3.6.1.4.1.13464.1.2.1.2.3.1.12
ggmp client Manage Vlan
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ggmplanGrnStp		1.3.6.1.4.1.13464.1.2.1.2.3.1.13
ggmp client STP switch. If lanswitch is in error status, the return value will be -1.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	grnStpEnable(1), grnStpDisable(2)

ggmplanHostVer		1.3.6.1.4.1.13464.1.2.1.2.3.1.14
Host Software Version of the Lanswitch
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..25)

ggmplanOnlineTime		1.3.6.1.4.1.13464.1.2.1.2.3.1.15
Client Lanswitch Online Time. Unit is second.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmplanVlanMode		1.3.6.1.4.1.13464.1.2.1.2.3.1.16
ggmp client vlan mode. port-based vlan means ingress does not check packets' vlan header, 802.1q means ingress checks packets' vlan header.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	vlanModePortBased(1), vlanMode802dot1q(2)

ggmplanMacLearningMode		1.3.6.1.4.1.13464.1.2.1.2.3.1.17
ggmp client mac-learning mode. ivl means independent vlan learning,svl means share vlan learning.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	macLearningModeIvl(0), macLearningModeSvl(1)

ggmplanHardwareVersion		1.3.6.1.4.1.13464.1.2.1.2.3.1.18
client's hardware version,0 means CD version and 1 means CG version.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	cdversion(0), cgversion(1)

ggmplanBootVer		1.3.6.1.4.1.13464.1.2.1.2.3.1.19
BootRom Version of the Lanswitch
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..25)

ggmplanDeviceName		1.3.6.1.4.1.13464.1.2.1.2.3.1.20
Device name of the registered lanswtich .
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

gbnGgmpPortPropertyTable		1.3.6.1.4.1.13464.1.2.1.2.4
A Table of Lanswitch port property table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GbnGgmpPortPropertyEntry

gbnGgmpPortPropertyEntry		1.3.6.1.4.1.13464.1.2.1.2.4.1
A list of Lanswitch port property parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	GbnGgmpPortPropertyEntry

ggmpportmac		1.3.6.1.4.1.13464.1.2.1.2.4.1.1
mac address of the regist lanswtich .
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

ggmpportportnumber		1.3.6.1.4.1.13464.1.2.1.2.4.1.2
port number of lanswitch
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmpportportclosed		1.3.6.1.4.1.13464.1.2.1.2.4.1.3
port state of closed or open .
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	interfaceEnable(1), interfaceDisable(2)

ggmpportportlink		1.3.6.1.4.1.13464.1.2.1.2.4.1.4
the port link status
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	portlinkup(1), portlinkdown(2)

ggmpportportvlanid		1.3.6.1.4.1.13464.1.2.1.2.4.1.5
The ports default vlan id
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ggmpportporttagged		1.3.6.1.4.1.13464.1.2.1.2.4.1.6
The ports tagged or untagged status
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	porttrunk(1), portaccess(2)

ggmpportportduplex		1.3.6.1.4.1.13464.1.2.1.2.4.1.7
The ports duplex
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	auto(1), half10(2), full10(3), half100(4), full100(5), half1000(6), full1000(7)

ggmpportportactualduplex		1.3.6.1.4.1.13464.1.2.1.2.4.1.8
The ports actual duplex
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	unknown(1), half10(2), full10(3), half100(4), full100(5), half1000(6), full1000(7)

ggmpportportlockmac		1.3.6.1.4.1.13464.1.2.1.2.4.1.9
The ports locked mac-address number
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

ggmpportportgrnstp		1.3.6.1.4.1.13464.1.2.1.2.4.1.10
The ports grn stp status
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	stpdisable(0), stpblocking(1), stplearning(2), stpforwarding(3), stpunknown(4)

gbnGgmpVlanPropertyTable		1.3.6.1.4.1.13464.1.2.1.2.5
A Table of Lanswitch vlan property table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GbnGgmpVlanPropertyEntry

gbnGgmpVlanPropertyEntry		1.3.6.1.4.1.13464.1.2.1.2.5.1
A list of Lanswitch Vlan property parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	GbnGgmpVlanPropertyEntry

ggmpvlanmac		1.3.6.1.4.1.13464.1.2.1.2.5.1.1
mac address of the regist lanswtich .
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

ggmpvlanvlanid		1.3.6.1.4.1.13464.1.2.1.2.5.1.2
the id of vlan
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmpvlanname		1.3.6.1.4.1.13464.1.2.1.2.5.1.3
An administratively assigned string, which may be used to identify the VLAN., but TiNet s2008 should not config vlan name
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

ggmpvlanstatic		1.3.6.1.4.1.13464.1.2.1.2.5.1.4
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent dot1qVlanStaticTable entry and ports learnt dynamically. dynamicGvrp(3) - this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN and it will be removed when the last port leaves the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	other(1), permanent(2), dynamicgvrp(3)

ggmpvlanmembermap		1.3.6.1.4.1.13464.1.2.1.2.5.1.5
The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.
Status: current	Access: read-only
OBJECT-TYPE
	PortList

ggmpvlanuntaggedmap		1.3.6.1.4.1.13464.1.2.1.2.5.1.6
The set of ports which are transmitting traffic for this VLAN as untagged frames.
Status: current	Access: read-only
OBJECT-TYPE
	PortList

ggmpvlanaddportmap		1.3.6.1.4.1.13464.1.2.1.2.5.1.7
The set of ports which are transmitting traffic for this VLAN as adding ports.
Status: current	Access: read-write
OBJECT-TYPE
	PortList

ggmpvlandelportmap		1.3.6.1.4.1.13464.1.2.1.2.5.1.8
The set of ports which are transmitting traffic for this VLAN as adding ports.
Status: current	Access: read-write
OBJECT-TYPE
	PortList

ggmpvlanrowstatus		1.3.6.1.4.1.13464.1.2.1.2.5.1.9
This object indicates the status of this entry.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

ggmpvlanaddtagportmap		1.3.6.1.4.1.13464.1.2.1.2.5.1.10
Modify member port of this vlan type to tagged.
Status: current	Access: read-write
OBJECT-TYPE
	PortList

ggmpvlanadduntagportmap		1.3.6.1.4.1.13464.1.2.1.2.5.1.11
Modify member port of this vlan type to untagged.
Status: current	Access: read-write
OBJECT-TYPE
	PortList

gbnGgmpLsSaveTable		1.3.6.1.4.1.13464.1.2.1.2.6
A Table that save lanswitch
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GbnGgmpLsSaveEntry

gbnGgmpLsSaveEntry		1.3.6.1.4.1.13464.1.2.1.2.6.1
A Table that save lanswitch
Status: current	Access: not-accessible
OBJECT-TYPE
	GbnGgmpLsSaveEntry

ggmpsaveMAC		1.3.6.1.4.1.13464.1.2.1.2.6.1.1
MAC address of the regist lanswtich
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

ggmpsaveStatus		1.3.6.1.4.1.13464.1.2.1.2.6.1.2
if ggmpsaveStatus is 2, then save the lanswitch whose macaddress is MacAddress.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	noop(1), savelanswitch(2)

ggmprebootStatus		1.3.6.1.4.1.13464.1.2.1.2.6.1.3
if ggmprebootStatus is 2, then reboot the lanswitch whose macaddress is MacAddress.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	noop(1), rebootlanswitch(2)

ggmpresetStatus		1.3.6.1.4.1.13464.1.2.1.2.6.1.4
if ggmpresetStatus is 2, then reset the lanswitch whose macaddress is MacAddress to default setting.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	noop(1), resetlanswitch(2)

ggmpSyncLswProperty		1.3.6.1.4.1.13464.1.2.1.2.6.1.5
Synchronize Lanswitch Property
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	noop(1), synchronizelswproperty(2)

ggmpSyncPortTable		1.3.6.1.4.1.13464.1.2.1.2.6.1.6
Synchronize Lanswitch Port Table
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	noop(1), synchronizeporttable(2)

ggmpSyncVlanTable		1.3.6.1.4.1.13464.1.2.1.2.6.1.7
Synchronize Lanswitch Vlan Table
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	noop(1), synchronizevlantable(2)

ggmpAllPortTag		1.3.6.1.4.1.13464.1.2.1.2.6.1.8
Set all port tag property. tagged[bit=1],do not change[bit=0]
Status: current	Access: read-write
OBJECT-TYPE
	PortList

ggmpAllPortUntag		1.3.6.1.4.1.13464.1.2.1.2.6.1.9
Set all port untag property. untagged[bit=1],do not change[bit=0]
Status: current	Access: read-write
OBJECT-TYPE
	PortList

ggmpRefusedPort		1.3.6.1.4.1.13464.1.2.1.2.7.1
Refused PortList of Server .enable[bit=1],disable[bit=0].
Status: current	Access: read-write
OBJECT-TYPE
	PortList

ggmpServerMngVlan		1.3.6.1.4.1.13464.1.2.1.2.7.2
Gnlink vlan in server.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..4094

ggmpSvrLanMngVlan		1.3.6.1.4.1.13464.1.2.1.2.7.3
Gnlink vlan in server for all clients. Command node.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..4094

ggmpTrapSwitch		1.3.6.1.4.1.13464.1.2.1.2.7.4
ggmp trap sending switch
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	ggmpTrapEnable(1), ggmpTrapDisable(2)

ggmpSvrRequestTimeout		1.3.6.1.4.1.13464.1.2.1.2.7.5
Maximum time that command waiting for its reply
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..10

ggmpSvrClientErrTimeout		1.3.6.1.4.1.13464.1.2.1.2.7.6
Time that server must wait to delete a lanswith in error state
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	90..255

ggmpSvrClientErrMaxHellos		1.3.6.1.4.1.13464.1.2.1.2.7.7
Times which lanswitch hasn't shankhands with server before being setted to error
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	3..10

ggmpSvrRequestMaxRetries		1.3.6.1.4.1.13464.1.2.1.2.7.8
Retransmit times for server before sending a command successfully
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	3..10

ggmpserverMacAddr		1.3.6.1.4.1.13464.1.2.1.2.7.9
ZY.Link protocol packets' destination MAC address
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

ggmpClientAppGetMode		1.3.6.1.4.1.13464.1.2.1.2.7.10
config mode by which to get application from server,ftp or tftp
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ftp(1), tftp(2)

ggmpClientAppSvrIpAddr		1.3.6.1.4.1.13464.1.2.1.2.7.11
ggmp client application ftp server ipaddress
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

ggmpClientAppFtpSvrUserName		1.3.6.1.4.1.13464.1.2.1.2.7.12
ggmp client application ftp server userName
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ggmpClientAppFtpSvrPassword		1.3.6.1.4.1.13464.1.2.1.2.7.13
ggmp client application ftp server password
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ggmpClientRemoteReboot		1.3.6.1.4.1.13464.1.2.1.2.7.14
config ZY.Link server allow client remote reboot
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

gbnGgmpLsARLTable		1.3.6.1.4.1.13464.1.2.1.2.8
A table that is used to search lanswitch ARL table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GbnGgmpLsARLEntry

gbnGgmpLsARLEntry		1.3.6.1.4.1.13464.1.2.1.2.8.1
A table that is used to search lanswitch ARL table
Status: current	Access: not-accessible
OBJECT-TYPE
	GbnGgmpLsARLEntry

ggmparllanMAC		1.3.6.1.4.1.13464.1.2.1.2.8.1.1
MAC address of the registered lanswtich
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

ggmparllanarlMAC		1.3.6.1.4.1.13464.1.2.1.2.8.1.2
MAC address of the registered lanswtich
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

ggmpmac2port		1.3.6.1.4.1.13464.1.2.1.2.8.1.3
Port id corresponding to the mac address in the last 6 bytes of the index.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ggmpClientPortLoop		1.3.6.1.4.1.13464.1.2.1.2.9.1
Client port loop
Status: current	Access: read-only
NOTIFICATION-TYPE

ggmpClientPortLoopFree		1.3.6.1.4.1.13464.1.2.1.2.9.2
Client port loop free
Status: current	Access: read-only
NOTIFICATION-TYPE

ggmpClientPortLinkUp		1.3.6.1.4.1.13464.1.2.1.2.9.3
Client port link up
Status: current	Access: read-only
NOTIFICATION-TYPE

ggmpClientPortLinkDown		1.3.6.1.4.1.13464.1.2.1.2.9.4
Client port link down
Status: current	Access: read-only
NOTIFICATION-TYPE

ggmpClientTurnErr		1.3.6.1.4.1.13464.1.2.1.2.9.5
Client turn to error status
Status: current	Access: read-only
NOTIFICATION-TYPE

ggmpClientTurnNormal		1.3.6.1.4.1.13464.1.2.1.2.9.6
Client turn to normal status from error status
Status: current	Access: read-only
NOTIFICATION-TYPE

ggmpClientDeleteErr		1.3.6.1.4.1.13464.1.2.1.2.9.7
Delete error status lanswitch information
Status: current	Access: read-only
NOTIFICATION-TYPE

ggmpClientNewReg		1.3.6.1.4.1.13464.1.2.1.2.9.8
New register lanswitch
Status: current	Access: read-only
NOTIFICATION-TYPE

ggmpDevClientAppTable		1.3.6.1.4.1.13464.1.2.1.2.10
Table used to config Lanswitch application table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GgmpDevClientAppEntry

ggmpDevClientAppEntry		1.3.6.1.4.1.13464.1.2.1.2.10.1
Table entry for configging clients' application list.
Status: current	Access: not-accessible
OBJECT-TYPE
	GgmpDevClientAppEntry

ggmpDevTypeNum		1.3.6.1.4.1.13464.1.2.1.2.10.1.1
This value actually is the same as the index of device id table, please refer to device id table for more details about which value each device corresponds to
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..24

ggmpRmtLoadAppType		1.3.6.1.4.1.13464.1.2.1.2.10.1.2
config file type to be loaded :bootrom or host
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	bootrom(1), host(2)

ggmpDevAppName		1.3.6.1.4.1.13464.1.2.1.2.10.1.3
ggmp client application filename
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..64)

ggmpDevRmtLoadTable		1.3.6.1.4.1.13464.1.2.1.2.11
A Table of Lanswitch application table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GgmpDevRmtLoadEntry

ggmpDevRmtLoadEntry		1.3.6.1.4.1.13464.1.2.1.2.11.1
Table entry for configging/showing clients remote load information.
Status: current	Access: not-accessible
OBJECT-TYPE
	GgmpDevRmtLoadEntry

ggmpRmtLoadDevMac		1.3.6.1.4.1.13464.1.2.1.2.11.1.1
MAC address of the regist lanswtich
Status: current	Access: not-accessible
OBJECT-TYPE
	MacAddress

ggmpRmtLoadQueIn		1.3.6.1.4.1.13464.1.2.1.2.11.1.2
current queue in which lanswitch resides
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	waitinglist(1), readylist(2), cmpltlist(3), failedlist(4)

ggmplanRmtLoadPercent		1.3.6.1.4.1.13464.1.2.1.2.11.1.3
Show the process of loading
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

ggmplanRmtLoadAppType		1.3.6.1.4.1.13464.1.2.1.2.11.1.4
config file type to be loaded :bootrom or host or both
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	bootrom(1), host(2), bootromAndHost(3)

ggmplanRmtLoadTime		1.3.6.1.4.1.13464.1.2.1.2.11.1.5
Time at which lanswitch to be loaded
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

ggmplanRmtLoadRowStatus		1.3.6.1.4.1.13464.1.2.1.2.11.1.6
Status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

ggmpRmtLoadModeTable		1.3.6.1.4.1.13464.1.2.1.2.12
A Table of Lanswitch application table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GgmpRmtLoadModeEntry

ggmpRmtLoadModeEntry		1.3.6.1.4.1.13464.1.2.1.2.12.1
Table entry for configging/showing remote load mode.
Status: current	Access: not-accessible
OBJECT-TYPE
	GgmpRmtLoadModeEntry

ggmpRmtLoadDevType		1.3.6.1.4.1.13464.1.2.1.2.12.1.1
value '0'means all device,the others actually are the same as the index of device id table,please refer to device id table for more details about which value each device corresponds to
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..24

ggmpRmtLoadmode		1.3.6.1.4.1.13464.1.2.1.2.12.1.2
Config loading mode:1.load all lanswitchs'host file ,or bootrom file, or both ,at specified time; 2.load all lanswitchs'host file, or bootrom file ,or both, periodically at specified time
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hostOnce(1), bootromOnce(2), hostAndBootromOnce(3), hostPeriodic(4), bootromPeriodic(5), hostAndBootromPeriodic(6), loadNone(7)

ggmpRmtLoadModeTime		1.3.6.1.4.1.13464.1.2.1.2.12.1.3
Config when to load lanswitch.loading time is total number of seconds relative to start point which is '1970/01/01 00:00:00' if remote-load-mode is 'loadAllOnce',or 'sunday 00:00:00'if remote-load-time is 'loadAllPeriodic'
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

ggmpRmtLoadNewRegAuto		1.3.6.1.4.1.13464.1.2.1.2.12.1.4
Config if all lanswitchs newly registered are loaded automatically. File to be loaded :host file, bootrom file, or both
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	hostFile(1), bootromFile(2), hostAndBootrom(3), none(4)

ggmpRmtLoadModeRowStatus		1.3.6.1.4.1.13464.1.2.1.2.12.1.5
Status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

ggmpGbnDeviceIdTable		1.3.6.1.4.1.13464.1.2.1.2.13
A Table of Lanswitch id Entry
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		GgmpGbnDeviceIdEntry

ggmpGbnDeviceIdEntry		1.3.6.1.4.1.13464.1.2.1.2.13.1
Table entry for configging lanswitch deviceId information.
Status: current	Access: not-accessible
OBJECT-TYPE
	GgmpGbnDeviceIdEntry

ggmpGbnDevIdIndex		1.3.6.1.4.1.13464.1.2.1.2.13.1.1
index of deviceId table,the first 20 entries of id table have been occupied,so index should not less than 21
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..48

ggmpGbnDeviceId		1.3.6.1.4.1.13464.1.2.1.2.13.1.2
lanswitch's device-id which is the identifier of device-type, first 20 entries of device-id table have been occupied by existing device-types,following details: S3042V->0x01000000,S2008E->0x02000000,S2016E->0x03000000, S2016EF->0x03010000,S2024E->0x04000000,S2024EF->0x04010000, S2208->0x05000000,S2024M->0x06010000,S2024M->0x06010000, S2024M->0x06010000,S2024M->0x06010000,S2016M->0x07010000, S2008M->0x08010000,S2024EI->0x09010000,S2016EI->0x0a010000, S2008EI->0x0b010000,S2008EI-S->0x13010000,S2008EI-SF->0x14010000, S2024C->0x0c010000,S2016C->0x0d010000,S2008C->0x0e010000, S2008C-F->0x0f010000,S2008B->0x11010000,these entries are protected by software.unknown device-type-number needs configging manually
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

ggmpGbnDeviceDesc		1.3.6.1.4.1.13464.1.2.1.2.13.1.3
lanswitch's device-type name such as 'TiNet S2008E'
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

ggmpGbnDeviceIDRowStatus		1.3.6.1.4.1.13464.1.2.1.2.13.1.4
Status of this entry.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

ggmpGbnDevLowMidHighType		1.3.6.1.4.1.13464.1.2.1.2.13.1.5
define whether device is low switch or mid-high switch
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	lowswitch(1), mid-highswitch(2)

ggmpClientmac		1.3.6.1.4.1.13464.1.2.1.2.14.1
ZY.Link protocol packets' destination MAC address
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

ggmpClientManageVlan		1.3.6.1.4.1.13464.1.2.1.2.14.2
Gnlink vlan for client.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..4094