Fore-tp25-MIB

File: Fore-tp25-MIB.mib (7293 bytes)

Imported modules

SNMPv2-SMI Fore-Common-MIB

Imported symbols

Integer32 Counter32 OBJECT-TYPE
MODULE-IDENTITY asx

Defined Types

Tp25ConfEntry  
SEQUENCE    
  tp25ConfBoard Integer32
  tp25ConfModule Integer32
  tp25ConfPort Integer32
  tp25MediaType INTEGER
  tp25LoopbackConfig INTEGER
  tp25RxTiming INTEGER

Tp25ErrorEntry  
SEQUENCE    
  tp25ErrorBoard Integer32
  tp25ErrorModule Integer32
  tp25ErrorPort Integer32
  tp25ErrorSymbol Counter32

Tp25AtmEntry  
SEQUENCE    
  tp25AtmBoard Integer32
  tp25AtmModule Integer32
  tp25AtmPort Integer32
  tp25AtmHCSs Counter32
  tp25AtmRxCells Counter32
  tp25AtmTxCells Counter32

Defined Values

foreTP25Module 1.3.6.1.4.1.326.2.2.1.1.9
The foreTP25 Module supports all switchs that have the 25.6Mbps UTP/STP port module.
MODULE-IDENTITY    

tp25ConfGroup 1.3.6.1.4.1.326.2.2.1.1.9.1
OBJECT IDENTIFIER    

tp25StatsGroup 1.3.6.1.4.1.326.2.2.1.1.9.2
OBJECT IDENTIFIER    

tp25ConfTable 1.3.6.1.4.1.326.2.2.1.1.9.1.1
A table of TP25(25.6Mbps UTP/STP switch port configuration information.
OBJECT-TYPE    
  SEQUENCE OF  
    Tp25ConfEntry

tp25ConfEntry 1.3.6.1.4.1.326.2.2.1.1.9.1.1.1
A table entry containing TP25 configuration information for each port.
OBJECT-TYPE    
  Tp25ConfEntry  

tp25ConfBoard 1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.1
The index of this port's switch board.
OBJECT-TYPE    
  Integer32  

tp25ConfModule 1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.2
The network module of this port.
OBJECT-TYPE    
  Integer32  

tp25ConfPort 1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.3
The number of this port.
OBJECT-TYPE    
  Integer32  

tp25MediaType 1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.4
This variable represents the type of the physical medium connected to the TP25 interface: tp25UTP (1) means physical media is UTP tp25STP (2) means physical media is STP tp25FTP (3) means physical media is FTP.
OBJECT-TYPE    
  INTEGER tp25UTP(1), tp25STP(2), tp25FTP(3)  

tp25LoopbackConfig 1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.5
This variable represents the loopback configuration of the TP25 interface. tp25NoLoop (1) means that the interface is not in a loopback state. tp25DiagLoop (2) means that the transmit data stream is looped back to the receiver. tp25LineLoop (3) also known as remote loopback, in this state received data is transfered to upstream system as well as looped back to the transmitter.
OBJECT-TYPE    
  INTEGER tp25NoLoop(1), tp25DiagLoop(2), tp25LineLoop(3)  

tp25RxTiming 1.3.6.1.4.1.326.2.2.1.1.9.1.1.1.6
This variable represents the type of the physical medium connected to the TP25 interface: tp25NoTimingPresent (1) means port is not receiving sync pulses. tp25TimingPresent (2) means port is receiving sync pulses.
OBJECT-TYPE    
  INTEGER tp25NoTimingPresent(1), tp25TimingPresent(2)  

tp25ErrorTable 1.3.6.1.4.1.326.2.2.1.1.9.2.1
A table of TP25 error counters.
OBJECT-TYPE    
  SEQUENCE OF  
    Tp25ErrorEntry

tp25ErrorEntry 1.3.6.1.4.1.326.2.2.1.1.9.2.1.1
A table entry containing TP25 error counters.
OBJECT-TYPE    
  Tp25ErrorEntry  

tp25ErrorBoard 1.3.6.1.4.1.326.2.2.1.1.9.2.1.1.1
The index of this port's switch board.
OBJECT-TYPE    
  Integer32  

tp25ErrorModule 1.3.6.1.4.1.326.2.2.1.1.9.2.1.1.2
The network module of this port.
OBJECT-TYPE    
  Integer32  

tp25ErrorPort 1.3.6.1.4.1.326.2.2.1.1.9.2.1.1.3
The number of this port.
OBJECT-TYPE    
  Integer32  

tp25ErrorSymbol 1.3.6.1.4.1.326.2.2.1.1.9.2.1.1.4
The number of all undefined 5 bit symbols received.
OBJECT-TYPE    
  Counter32  

tp25AtmTable 1.3.6.1.4.1.326.2.2.1.1.9.2.2
A table of TP25 ATM statistics information.
OBJECT-TYPE    
  SEQUENCE OF  
    Tp25AtmEntry

tp25AtmEntry 1.3.6.1.4.1.326.2.2.1.1.9.2.2.1
A table entry containing TP25 ATM statistics information.
OBJECT-TYPE    
  Tp25AtmEntry  

tp25AtmBoard 1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.1
The index of this port's switch board.
OBJECT-TYPE    
  Integer32  

tp25AtmModule 1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.2
The network module of this port.
OBJECT-TYPE    
  Integer32  

tp25AtmPort 1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.3
The number of this port.
OBJECT-TYPE    
  Integer32  

tp25AtmHCSs 1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.4
Number of header check sequence (HCS) error events. The HCS is a CRC-8 calculation over the first 4 octets of the ATM cell header.
OBJECT-TYPE    
  Counter32  

tp25AtmRxCells 1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.5
Number of ATM cells that were received.
OBJECT-TYPE    
  Counter32  

tp25AtmTxCells 1.3.6.1.4.1.326.2.2.1.1.9.2.2.1.6
Number of non-null ATM cells that were transmitted.
OBJECT-TYPE    
  Counter32