FOUNDRY-SN-OSPF-GROUP-MIB

File: FOUNDRY-SN-OSPF-GROUP-MIB.mib (114191 bytes)

Imported modules

RFC1155-SMI RFC-1212 FOUNDRY-SN-ROOT-MIB

Imported symbols

Counter Gauge IpAddress
OBJECT-TYPE snOspf

Defined Types

AreaID  
IpAddress    

RouterID  
IpAddress    

Metric  
INTEGER 0..65535    

BigMetric  
INTEGER 0..16777215    

TruthVal  
INTEGER false(0), true(1)    

RtrStatus  
INTEGER disabled(0), enabled(1)    

PositiveInteger  
INTEGER 0..2147483647    

HelloRange  
INTEGER 1..65535    

UpToMaxAge  
INTEGER 0..3600    

DesignatedRouterPriority  
INTEGER 0..255    

TOSType  
INTEGER 0..30    

SnOspfAreaEntry  
SEQUENCE    
  snOspfAreaId AreaID
  snOspfImportASExtern INTEGER
  snOspfStubMetric BigMetric
  snOspfAreaRowStatus INTEGER
  snOspfAreaIdFormat INTEGER

SnOspfAreaRangeEntry  
SEQUENCE    
  snOspfAreaRangeAreaID AreaID
  snOspfAreaRangeNet IpAddress
  snOspfAreaRangeMask IpAddress
  snOspfAreaRangeRowStatus INTEGER
  snOspfAreaRangeAreaIdFormat INTEGER

SnOspfIfEntry  
SEQUENCE    
  snOspfIfPort INTEGER
  snOspfIfAreaId AreaID
  snOspfIfAdminStat RtrStatus
  snOspfIfRtrPriority DesignatedRouterPriority
  snOspfIfTransitDelay UpToMaxAge
  snOspfIfRetransInterval UpToMaxAge
  snOspfIfHelloInterval HelloRange
  snOspfIfRtrDeadInterval PositiveInteger
  snOspfIfAuthType INTEGER
  snOspfIfAuthKey OCTET STRING
  snOspfIfMetricValue INTEGER
  snOspfIfRowStatus INTEGER
  snOspfIfMd5AuthKeyId INTEGER
  snOspfIfMd5AuthKey OCTET STRING
  snOspfIfMd5ActivationWaitTime INTEGER
  snOspfIfAreaIdFormat INTEGER
  snOspfIfPassiveMode INTEGER
  snOspfIfDatabaseFilterAllOut INTEGER
  snOspfIfMtuIgnore INTEGER
  snOspfIfNetworkP2mp INTEGER

SnOspfIf2Entry  
SEQUENCE    
  snOspfIf2Port INTEGER
  snOspfIf2AreaId AreaID
  snOspfIf2AdminStat RtrStatus
  snOspfIf2RtrPriority DesignatedRouterPriority
  snOspfIf2TransitDelay UpToMaxAge
  snOspfIf2RetransInterval UpToMaxAge
  snOspfIf2HelloInterval HelloRange
  snOspfIf2RtrDeadInterval PositiveInteger
  snOspfIf2AuthType INTEGER
  snOspfIf2AuthKey OCTET STRING
  snOspfIf2MetricValue INTEGER
  snOspfIf2RowStatus INTEGER
  snOspfIf2Md5AuthKeyId INTEGER
  snOspfIf2Md5AuthKey OCTET STRING
  snOspfIf2Md5ActivationWaitTime INTEGER
  snOspfIf2AreaIdFormat INTEGER
  snOspfIf2PassiveMode INTEGER
  snOspfIf2DatabaseFilterAllOut INTEGER
  snOspfIf2MtuIgnore INTEGER
  snOspfIf2NetworkP2mp INTEGER

SnOspfVirtIfEntry  
SEQUENCE    
  snOspfVirtIfAreaID AreaID
  snOspfVirtIfNeighbor RouterID
  snOspfVirtIfTransitDelay UpToMaxAge
  snOspfVirtIfRetransInterval UpToMaxAge
  snOspfVirtIfHelloInterval HelloRange
  snOspfVirtIfRtrDeadInterval PositiveInteger
  snOspfVirtIfAuthType INTEGER
  snOspfVirtIfAuthKey OCTET STRING
  snOspfVirtIfRowStatus INTEGER
  snOspfVirtIfMd5AuthKeyId INTEGER
  snOspfVirtIfMd5AuthKey OCTET STRING
  snOspfVirtIfMd5ActivationWaitTime INTEGER
  snOspfVirtIfAreaIdFormat INTEGER

SnOspfRedisEntry  
SEQUENCE    
  snOspfRedisIndex INTEGER
  snOspfRedisIpAddress IpAddress
  snOspfRedisMask IpAddress
  snOspfRedisAction INTEGER
  snOspfRedisProtocol INTEGER
  snOspfRedisSetOspfMetric INTEGER
  snOspfRedisOspfMetricValue Metric
  snOspfRedisMatchRipMetric INTEGER
  snOspfRedisRipMetricValue INTEGER
  snOspfRedisRowStatus INTEGER

SnOspfNbrEntry  
SEQUENCE    
  snOspfNbrEntryIndex INTEGER
  snOspfNbrPort INTEGER
  snOspfNbrIpAddr IpAddress
  snOspfNbrIndex INTEGER
  snOspfNbrRtrId RouterID
  snOspfNbrOptions INTEGER
  snOspfNbrPriority DesignatedRouterPriority
  snOspfNbrState INTEGER
  snOspfNbrEvents Counter
  snOspfNbrLsRetransQLen Gauge

SnOspfVirtNbrEntry  
SEQUENCE    
  snOspfVirtNbrEntryIndex INTEGER
  snOspfVirtNbrArea AreaID
  snOspfVirtNbrRtrId RouterID
  snOspfVirtNbrIpAddr IpAddress
  snOspfVirtNbrOptions INTEGER
  snOspfVirtNbrState INTEGER
  snOspfVirtNbrEvents Counter
  snOspfVirtNbrLSRetransQLen Gauge
  snOspfVirtNbrAreaIdFormat INTEGER

SnOspfLsdbEntry  
SEQUENCE    
  snOspfLsdbEntryIndex INTEGER
  snOspfLsdbAreaId AreaID
  snOspfLsdbType INTEGER
  snOspfLsdbLsId IpAddress
  snOspfLsdbRouterId RouterID
  snOspfLsdbSequence INTEGER
  snOspfLsdbAge INTEGER
  snOspfLsdbChecksum INTEGER
  snOspfLsdbAdvertisement OCTET STRING
  snOspfLsdbAreaIdFormat INTEGER

SnOspfExtLsdbEntry  
SEQUENCE    
  snOspfExtLsdbEntryIndex INTEGER
  snOspfExtLsdbType INTEGER
  snOspfExtLsdbLsId IpAddress
  snOspfExtLsdbRouterId RouterID
  snOspfExtLsdbSequence INTEGER
  snOspfExtLsdbAge INTEGER
  snOspfExtLsdbChecksum INTEGER
  snOspfExtLsdbAdvertisement OCTET STRING

SnOspfAreaStatusEntry  
SEQUENCE    
  snOspfAreaStatusEntryIndex INTEGER
  snOspfAreaStatusAreaId AreaID
  snOspfAreaStatusImportASExtern INTEGER
  snOspfAreaStatusStubMetric BigMetric
  snOspfAreaStatusSpfRuns Counter
  snOspfAreaStatusAreaBdrRtrCount Gauge
  snOspfAreaStatusASBdrRtrCount Gauge
  snOspfAreaStatusLSACount Gauge
  snOspfAreaStatusLSACksumSum INTEGER
  snOspfAreaStatusAreaIdFormat INTEGER

SnOspfIfStatusEntry  
SEQUENCE    
  snOspfIfStatusEntryIndex INTEGER
  snOspfIfStatusPort INTEGER
  snOspfIfStatusIpAddress IpAddress
  snOspfIfStatusAreaId AreaID
  snOspfIfStatusType INTEGER
  snOspfIfStatusAdminStat RtrStatus
  snOspfIfStatusRtrPriority DesignatedRouterPriority
  snOspfIfStatusTransitDelay UpToMaxAge
  snOspfIfStatusRetransInterval UpToMaxAge
  snOspfIfStatusHelloInterval HelloRange
  snOspfIfStatusRtrDeadInterval PositiveInteger
  snOspfIfStatusState INTEGER
  snOspfIfStatusDesignatedRouter IpAddress
  snOspfIfStatusBackupDesignatedRouter IpAddress
  snOspfIfStatusEvents Counter
  snOspfIfStatusAuthType INTEGER
  snOspfIfStatusAuthKey OCTET STRING
  snOspfIfStatusMetricValue Metric
  snOspfIfStatusMd5AuthKeyId INTEGER
  snOspfIfStatusMd5AuthKey OCTET STRING
  snOspfIfStatusMd5ActivationWaitTime INTEGER
  snOspfIfStatusAreaIdFormat INTEGER

SnOspfVirtIfStatusEntry  
SEQUENCE    
  snOspfVirtIfStatusEntryIndex INTEGER
  snOspfVirtIfStatusAreaID AreaID
  snOspfVirtIfStatusNeighbor RouterID
  snOspfVirtIfStatusTransitDelay UpToMaxAge
  snOspfVirtIfStatusRetransInterval UpToMaxAge
  snOspfVirtIfStatusHelloInterval HelloRange
  snOspfVirtIfStatusRtrDeadInterval PositiveInteger
  snOspfVirtIfStatusState INTEGER
  snOspfVirtIfStatusEvents Counter
  snOspfVirtIfStatusAuthType INTEGER
  snOspfVirtIfStatusAuthKey OCTET STRING
  snOspfVirtIfStatusMd5AuthKeyId INTEGER
  snOspfVirtIfStatusMd5AuthKey OCTET STRING
  snOspfVirtIfStatusMd5ActivationWaitTime INTEGER
  snOspfVirtIfStatusAreaIdFormat INTEGER

SnOspfRoutingInfoEntry  
SEQUENCE    
  snOspfRoutingInfoIndex INTEGER
  snOspfRoutingInfoRouterID RouterID
  snOspfRoutingInfoRouterType INTEGER
  snOspfRoutingInfoNextHopRouterID RouterID
  snOspfRoutingInfoOutgoingInterface INTEGER

Defined Values

snOspfGen 1.3.6.1.4.1.1991.1.2.4.1
OBJECT IDENTIFIER    

snOspfArea 1.3.6.1.4.1.1991.1.2.4.2
OBJECT IDENTIFIER    

snOspfAddrRange 1.3.6.1.4.1.1991.1.2.4.3
OBJECT IDENTIFIER    

snOspfIntf 1.3.6.1.4.1.1991.1.2.4.4
OBJECT IDENTIFIER    

snOspfVirtIf 1.3.6.1.4.1.1991.1.2.4.5
OBJECT IDENTIFIER    

snOspfRedis 1.3.6.1.4.1.1991.1.2.4.6
OBJECT IDENTIFIER    

snOspfNbr 1.3.6.1.4.1.1991.1.2.4.7
OBJECT IDENTIFIER    

snOspfVirtNbr 1.3.6.1.4.1.1991.1.2.4.8
OBJECT IDENTIFIER    

snOspfLsdb 1.3.6.1.4.1.1991.1.2.4.9
OBJECT IDENTIFIER    

snOspfExtLsdb 1.3.6.1.4.1.1991.1.2.4.10
OBJECT IDENTIFIER    

snOspfAreaStatus 1.3.6.1.4.1.1991.1.2.4.11
OBJECT IDENTIFIER    

snOspfIfStatus 1.3.6.1.4.1.1991.1.2.4.12
OBJECT IDENTIFIER    

snOspfVirtIfStatus 1.3.6.1.4.1.1991.1.2.4.13
OBJECT IDENTIFIER    

snOspfRoutingInfo 1.3.6.1.4.1.1991.1.2.4.14
OBJECT IDENTIFIER    

snOspfTrapControl 1.3.6.1.4.1.1991.1.2.4.15
OBJECT IDENTIFIER    

snOspfRouterId 1.3.6.1.4.1.1991.1.2.4.1.1
A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RouterID  

snOspfAdminStat 1.3.6.1.4.1.1991.1.2.4.1.2
The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snOspfASBdrRtrStatus 1.3.6.1.4.1.1991.1.2.4.1.3
A flag to note whether this router is an Autonomous System border router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthVal  

snOspfRedisMode 1.3.6.1.4.1.1991.1.2.4.1.4
The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is active; 'disabled' disables it on the router.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snOspfDefaultOspfMetricValue 1.3.6.1.4.1.1991.1.2.4.1.5
The metric of using a default OSPF Metric value on this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

snOspfExternLSACount 1.3.6.1.4.1.1991.1.2.4.1.6
The number of external (LS type 5) link-state advertisements in the link-state database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

snOspfExternLSACksumSum 1.3.6.1.4.1.1991.1.2.4.1.7
The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfOriginateNewLSAs 1.3.6.1.4.1.1991.1.2.4.1.8
The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOspfRxNewLSAs 1.3.6.1.4.1.1991.1.2.4.1.9
The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link-state advertisements.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOspfOspfRedisMetricType 1.3.6.1.4.1.1991.1.2.4.1.10
type1: For External Type 1 (comparable value) the intra-area and inter-area routes, it is an OSPF metric plus the External Metric. type2: For external Type 2 (non-comparable value) routes, it is the external metric.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

snOspfExtLsdbLimit 1.3.6.1.4.1.1991.1.2.4.1.11
The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snOspfExitOverflowInterval 1.3.6.1.4.1.1991.1.2.4.1.12
The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..86400  

snOspfRfc1583Compatibility 1.3.6.1.4.1.1991.1.2.4.1.13
This allows the ospf routing either compatible with RFC1583 or RFC2178. enabled(1)........activate RFC1583 compatibility rather than RFC2178 disabled(0).......disable RFC1583 compatibility and compatible to RFC2178.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfRouterIdFormat 1.3.6.1.4.1.1991.1.2.4.1.14
This object is used to specify whether RouterId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfDistance 1.3.6.1.4.1.1991.1.2.4.1.15
OSPF Adminitrative distance. 0 if distance is not set.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snOspfDistanceIntra 1.3.6.1.4.1.1991.1.2.4.1.16
OSPF Adminitrative distance - Intra Area.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

snOspfDistanceInter 1.3.6.1.4.1.1991.1.2.4.1.17
OSPF Adminitrative distance - Inter Area.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

snOspfDistanceExternal 1.3.6.1.4.1.1991.1.2.4.1.18
OSPF Adminitrative distance - External.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

snOspfAreaTable 1.3.6.1.4.1.1991.1.2.4.2.1
Information describing the configured parameters and cumulative statistics of the router's attached areas.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfAreaEntry

snOspfAreaEntry 1.3.6.1.4.1.1991.1.2.4.2.1.1
Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfAreaEntry  

snOspfAreaId 1.3.6.1.4.1.1991.1.2.4.2.1.1.1
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AreaID  

snOspfImportASExtern 1.3.6.1.4.1.1991.1.2.4.2.1.1.2
The area's support for importing AS external link- state advertisements. 0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

snOspfStubMetric 1.3.6.1.4.1.1991.1.2.4.2.1.1.3
The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME.
Status: mandatory Access: read-write
OBJECT-TYPE    
  BigMetric  

snOspfAreaRowStatus 1.3.6.1.4.1.1991.1.2.4.2.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snOspfAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.2.1.1.5
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfAreaRangeTable 1.3.6.1.4.1.1991.1.2.4.3.1
A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfAreaRangeEntry

snOspfAreaRangeEntry 1.3.6.1.4.1.1991.1.2.4.3.1.1
A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfAreaRangeEntry  

snOspfAreaRangeAreaID 1.3.6.1.4.1.1991.1.2.4.3.1.1.1
The Area the Address Range is to be found within.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AreaID  

snOspfAreaRangeNet 1.3.6.1.4.1.1991.1.2.4.3.1.1.2
The IP Address of the Net or Subnet indicated by the range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfAreaRangeMask 1.3.6.1.4.1.1991.1.2.4.3.1.1.3
The Subnet Mask that pertains to the Net or Subnet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snOspfAreaRangeRowStatus 1.3.6.1.4.1.1991.1.2.4.3.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snOspfAreaRangeAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.3.1.1.5
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfIfTable 1.3.6.1.4.1.1991.1.2.4.4.1
The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfIfEntry

snOspfIfEntry 1.3.6.1.4.1.1991.1.2.4.4.1.1
The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SnOspfIfEntry  

snOspfIfPort 1.3.6.1.4.1.1991.1.2.4.4.1.1.1
The physical router port of this OSPF interface.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfIfAreaId 1.3.6.1.4.1.1991.1.2.4.4.1.1.2
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
Status: deprecated Access: read-write
OBJECT-TYPE    
  AreaID  

snOspfIfAdminStat 1.3.6.1.4.1.1991.1.2.4.4.1.1.3
The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
Status: deprecated Access: read-write
OBJECT-TYPE    
  RtrStatus  

snOspfIfRtrPriority 1.3.6.1.4.1.1991.1.2.4.4.1.1.4
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
Status: deprecated Access: read-write
OBJECT-TYPE    
  DesignatedRouterPriority  

snOspfIfTransitDelay 1.3.6.1.4.1.1991.1.2.4.4.1.1.5
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
Status: deprecated Access: read-write
OBJECT-TYPE    
  UpToMaxAge  

snOspfIfRetransInterval 1.3.6.1.4.1.1991.1.2.4.4.1.1.6
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
Status: deprecated Access: read-write
OBJECT-TYPE    
  UpToMaxAge  

snOspfIfHelloInterval 1.3.6.1.4.1.1991.1.2.4.4.1.1.7
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
Status: deprecated Access: read-write
OBJECT-TYPE    
  HelloRange  

snOspfIfRtrDeadInterval 1.3.6.1.4.1.1991.1.2.4.4.1.1.8
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
Status: deprecated Access: read-write
OBJECT-TYPE    
  PositiveInteger  

snOspfIfAuthType 1.3.6.1.4.1.1991.1.2.4.4.1.1.9
The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snOspfIfAuthKey 1.3.6.1.4.1.1991.1.2.4.4.1.1.10
The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfAuthKey always returns an Octet String of length zero.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

snOspfIfMetricValue 1.3.6.1.4.1.1991.1.2.4.4.1.1.11
The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

snOspfIfRowStatus 1.3.6.1.4.1.1991.1.2.4.4.1.1.12
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snOspfIfMd5AuthKeyId 1.3.6.1.4.1.1991.1.2.4.4.1.1.13
The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet).
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snOspfIfMd5AuthKey 1.3.6.1.4.1.1991.1.2.4.4.1.1.14
The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero.
Status: deprecated Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

snOspfIfMd5ActivationWaitTime 1.3.6.1.4.1.1991.1.2.4.4.1.1.15
The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..14400  

snOspfIfAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.4.1.1.16
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfIfPassiveMode 1.3.6.1.4.1.1991.1.2.4.4.1.1.17
This object control the passive mode of this interface.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfIfDatabaseFilterAllOut 1.3.6.1.4.1.1991.1.2.4.4.1.1.18
This object control the filtering of outgoing OSPF LSA on this interface.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfIfMtuIgnore 1.3.6.1.4.1.1991.1.2.4.4.1.1.19
This object control MTU detection mode of this interface.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfIfNetworkP2mp 1.3.6.1.4.1.1991.1.2.4.4.1.1.20
This object enable/disable P2MP mode of this interface.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfIf2Table 1.3.6.1.4.1.1991.1.2.4.4.2
The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfIf2Entry

snOspfIf2Entry 1.3.6.1.4.1.1991.1.2.4.4.2.1
The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfIf2Entry  

snOspfIf2Port 1.3.6.1.4.1.1991.1.2.4.4.2.1.1
The physical router port of this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfIf2AreaId 1.3.6.1.4.1.1991.1.2.4.4.2.1.2
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AreaID  

snOspfIf2AdminStat 1.3.6.1.4.1.1991.1.2.4.4.2.1.3
The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

snOspfIf2RtrPriority 1.3.6.1.4.1.1991.1.2.4.4.2.1.4
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DesignatedRouterPriority  

snOspfIf2TransitDelay 1.3.6.1.4.1.1991.1.2.4.4.2.1.5
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  UpToMaxAge  

snOspfIf2RetransInterval 1.3.6.1.4.1.1991.1.2.4.4.2.1.6
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  UpToMaxAge  

snOspfIf2HelloInterval 1.3.6.1.4.1.1991.1.2.4.4.2.1.7
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HelloRange  

snOspfIf2RtrDeadInterval 1.3.6.1.4.1.1991.1.2.4.4.2.1.8
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PositiveInteger  

snOspfIf2AuthType 1.3.6.1.4.1.1991.1.2.4.4.2.1.9
The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snOspfIf2AuthKey 1.3.6.1.4.1.1991.1.2.4.4.2.1.10
The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIf2AuthKey always returns an Octet String of length zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

snOspfIf2MetricValue 1.3.6.1.4.1.1991.1.2.4.4.2.1.11
The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

snOspfIf2RowStatus 1.3.6.1.4.1.1991.1.2.4.4.2.1.12
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snOspfIf2Md5AuthKeyId 1.3.6.1.4.1.1991.1.2.4.4.2.1.13
The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIf2Md5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snOspfIf2Md5AuthKey 1.3.6.1.4.1.1991.1.2.4.4.2.1.14
The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIf2Md5AuthKey always returns an Octet String of length zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

snOspfIf2Md5ActivationWaitTime 1.3.6.1.4.1.1991.1.2.4.4.2.1.15
The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..14400  

snOspfIf2AreaIdFormat 1.3.6.1.4.1.1991.1.2.4.4.2.1.16
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfIf2PassiveMode 1.3.6.1.4.1.1991.1.2.4.4.2.1.17
This object control the passive mode of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfIf2DatabaseFilterAllOut 1.3.6.1.4.1.1991.1.2.4.4.2.1.18
This object control the filtering of outgoing OSPF LSA on this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfIf2MtuIgnore 1.3.6.1.4.1.1991.1.2.4.4.2.1.19
This object control MTU detection mode of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfIf2NetworkP2mp 1.3.6.1.4.1.1991.1.2.4.4.2.1.20
This object enable/disable P2MP mode of this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfVirtIfTable 1.3.6.1.4.1.1991.1.2.4.5.1
Information about this router's virtual interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfVirtIfEntry

snOspfVirtIfEntry 1.3.6.1.4.1.1991.1.2.4.5.1.1
Information about a single Virtual Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfVirtIfEntry  

snOspfVirtIfAreaID 1.3.6.1.4.1.1991.1.2.4.5.1.1.1
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
Status: mandatory Access: read-only
OBJECT-TYPE    
  AreaID  

snOspfVirtIfNeighbor 1.3.6.1.4.1.1991.1.2.4.5.1.1.2
The Router ID of the Virtual Neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

snOspfVirtIfTransitDelay 1.3.6.1.4.1.1991.1.2.4.5.1.1.3
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
Status: mandatory Access: read-write
OBJECT-TYPE    
  UpToMaxAge  

snOspfVirtIfRetransInterval 1.3.6.1.4.1.1991.1.2.4.5.1.1.4
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  UpToMaxAge  

snOspfVirtIfHelloInterval 1.3.6.1.4.1.1991.1.2.4.5.1.1.5
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  HelloRange  

snOspfVirtIfRtrDeadInterval 1.3.6.1.4.1.1991.1.2.4.5.1.1.6
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  PositiveInteger  

snOspfVirtIfAuthType 1.3.6.1.4.1.1991.1.2.4.5.1.1.7
The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snOspfVirtIfAuthKey 1.3.6.1.4.1.1991.1.2.4.5.1.1.8
If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

snOspfVirtIfRowStatus 1.3.6.1.4.1.1991.1.2.4.5.1.1.9
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snOspfVirtIfMd5AuthKeyId 1.3.6.1.4.1.1991.1.2.4.5.1.1.10
The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

snOspfVirtIfMd5AuthKey 1.3.6.1.4.1.1991.1.2.4.5.1.1.11
The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

snOspfVirtIfMd5ActivationWaitTime 1.3.6.1.4.1.1991.1.2.4.5.1.1.12
The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..14400  

snOspfVirtIfAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.5.1.1.13
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfRedisTable 1.3.6.1.4.1.1991.1.2.4.6.1
The OSPF Redistribution Table contains a list of routes that could be imported into the OSPF domain.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfRedisEntry

snOspfRedisEntry 1.3.6.1.4.1.1991.1.2.4.6.1.1
The OSPF Redistribution Entry specifies a particular RIP or Static route to be imported into the OSPF domain.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfRedisEntry  

snOspfRedisIndex 1.3.6.1.4.1.1991.1.2.4.6.1.1.1
The destination IP address that associates with this particular route.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..64  

snOspfRedisIpAddress 1.3.6.1.4.1.1991.1.2.4.6.1.1.2
The destination IP address that associates with this particular route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snOspfRedisMask 1.3.6.1.4.1.1991.1.2.4.6.1.1.3
The Subnet Mask that pertains to this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

snOspfRedisAction 1.3.6.1.4.1.1991.1.2.4.6.1.1.4
The action to be taken if the route match this entry. noImport(0): - the route is NOT imported into OSPF Domain. import(1): - the route is imported into OSPF Domain as external type 2 route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noImport(0), import(1)  

snOspfRedisProtocol 1.3.6.1.4.1.1991.1.2.4.6.1.1.5
The imported routes into OSPF domain is set in the following: rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. bgp(4): - the BGP route. connected(5): - the connected route. isis(6): - the ISIS route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rip(1), all(2), static(3), bgp(4), connected(5), isis(6)  

snOspfRedisSetOspfMetric 1.3.6.1.4.1.1991.1.2.4.6.1.1.6
The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the OSPF metric field. enabled(1): - the route metric matches the OSPF metric field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfRedisOspfMetricValue 1.3.6.1.4.1.1991.1.2.4.6.1.1.7
The metric of using OSPF Metric value on this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Metric  

snOspfRedisMatchRipMetric 1.3.6.1.4.1.1991.1.2.4.6.1.1.8
The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the RIP metric field. enabled(1): - the route metric matches the RIP metric field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snOspfRedisRipMetricValue 1.3.6.1.4.1.1991.1.2.4.6.1.1.9
The metric of using RIP Metric value (1 to 15 hops) on this route.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

snOspfRedisRowStatus 1.3.6.1.4.1.1991.1.2.4.6.1.1.10
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snOspfNbrTable 1.3.6.1.4.1.1991.1.2.4.7.1
A table of non-virtual neighbor information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfNbrEntry

snOspfNbrEntry 1.3.6.1.4.1.1991.1.2.4.7.1.1
The information regarding a single neighbor.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfNbrEntry  

snOspfNbrEntryIndex 1.3.6.1.4.1.1991.1.2.4.7.1.1.1
The table entry index of this neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfNbrPort 1.3.6.1.4.1.1991.1.2.4.7.1.1.2
The physical port of this neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfNbrIpAddr 1.3.6.1.4.1.1991.1.2.4.7.1.1.3
The IP address of this neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfNbrIndex 1.3.6.1.4.1.1991.1.2.4.7.1.1.4
The neighbor index of each port and each IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfNbrRtrId 1.3.6.1.4.1.1991.1.2.4.7.1.1.5
A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

snOspfNbrOptions 1.3.6.1.4.1.1991.1.2.4.7.1.1.6
A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfNbrPriority 1.3.6.1.4.1.1991.1.2.4.7.1.1.7
The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DesignatedRouterPriority  

snOspfNbrState 1.3.6.1.4.1.1991.1.2.4.7.1.1.8
The State of the relationship with this Neigh- bor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

snOspfNbrEvents 1.3.6.1.4.1.1991.1.2.4.7.1.1.9
The number of times this neighbor relationship has changed state, or an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOspfNbrLsRetransQLen 1.3.6.1.4.1.1991.1.2.4.7.1.1.10
The current length of the retransmission queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

snOspfVirtNbrTable 1.3.6.1.4.1.1991.1.2.4.8.1
A table of virtual neighbor information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfVirtNbrEntry

snOspfVirtNbrEntry 1.3.6.1.4.1.1991.1.2.4.8.1.1
Virtual neighbor information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfVirtNbrEntry  

snOspfVirtNbrEntryIndex 1.3.6.1.4.1.1991.1.2.4.8.1.1.1
The table entry index of this virtual neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfVirtNbrArea 1.3.6.1.4.1.1991.1.2.4.8.1.1.2
The Transit Area Identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AreaID  

snOspfVirtNbrRtrId 1.3.6.1.4.1.1991.1.2.4.8.1.1.3
A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

snOspfVirtNbrIpAddr 1.3.6.1.4.1.1991.1.2.4.8.1.1.4
The IP address this Virtual Neighbor is using.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfVirtNbrOptions 1.3.6.1.4.1.1991.1.2.4.8.1.1.5
A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfVirtNbrState 1.3.6.1.4.1.1991.1.2.4.8.1.1.6
The state of the Virtual Neighbor Relationship.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

snOspfVirtNbrEvents 1.3.6.1.4.1.1991.1.2.4.8.1.1.7
The number of times this virtual link has changed its state, or an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOspfVirtNbrLSRetransQLen 1.3.6.1.4.1.1991.1.2.4.8.1.1.8
The current length of the retransmission queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

snOspfVirtNbrAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.8.1.1.9
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfLsdbTable 1.3.6.1.4.1.1991.1.2.4.9.1
The OSPF Process's Links State Database.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfLsdbEntry

snOspfLsdbEntry 1.3.6.1.4.1.1991.1.2.4.9.1.1
A single Link State Advertisement.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfLsdbEntry  

snOspfLsdbEntryIndex 1.3.6.1.4.1.1991.1.2.4.9.1.1.1
The table entry index of this Link State Database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfLsdbAreaId 1.3.6.1.4.1.1991.1.2.4.9.1.1.2
The 32 bit identifier of the Area from which the LSA was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AreaID  

snOspfLsdbType 1.3.6.1.4.1.1991.1.2.4.9.1.1.3
The type of the link state advertisement. Each link state type has a separate advertisement format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7), opaqueLink(9), opaqueAreaLink(10), opaqueAsLink(11)  

snOspfLsdbLsId 1.3.6.1.4.1.1991.1.2.4.9.1.1.4
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfLsdbRouterId 1.3.6.1.4.1.1991.1.2.4.9.1.1.5
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

snOspfLsdbSequence 1.3.6.1.4.1.1991.1.2.4.9.1.1.6
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfLsdbAge 1.3.6.1.4.1.1991.1.2.4.9.1.1.7
This field is the age of the link state advertisement in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfLsdbChecksum 1.3.6.1.4.1.1991.1.2.4.9.1.1.8
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfLsdbAdvertisement 1.3.6.1.4.1.1991.1.2.4.9.1.1.9
The entire Link State Advertisement, including its header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..65535)  

snOspfLsdbAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.9.1.1.10
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfExtLsdbTable 1.3.6.1.4.1.1991.1.2.4.10.1
The OSPF Process's Links State Database.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfExtLsdbEntry

snOspfExtLsdbEntry 1.3.6.1.4.1.1991.1.2.4.10.1.1
A single Link State Advertisement.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfExtLsdbEntry  

snOspfExtLsdbEntryIndex 1.3.6.1.4.1.1991.1.2.4.10.1.1.1
The table entry index of this Link State Database.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfExtLsdbType 1.3.6.1.4.1.1991.1.2.4.10.1.1.2
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER asExternalLink(5)  

snOspfExtLsdbLsId 1.3.6.1.4.1.1991.1.2.4.10.1.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfExtLsdbRouterId 1.3.6.1.4.1.1991.1.2.4.10.1.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

snOspfExtLsdbSequence 1.3.6.1.4.1.1991.1.2.4.10.1.1.5
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfExtLsdbAge 1.3.6.1.4.1.1991.1.2.4.10.1.1.6
This field is the age of the link state adver- tisement in seconds.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfExtLsdbChecksum 1.3.6.1.4.1.1991.1.2.4.10.1.1.7
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfExtLsdbAdvertisement 1.3.6.1.4.1.1991.1.2.4.10.1.1.8
The entire Link State Advertisement, including its header.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(36)  

snOspfAreaStatusTable 1.3.6.1.4.1.1991.1.2.4.11.1
Information describing the configured parameters and cumulative statistics of the router's attached areas.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfAreaStatusEntry

snOspfAreaStatusEntry 1.3.6.1.4.1.1991.1.2.4.11.1.1
Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfAreaStatusEntry  

snOspfAreaStatusEntryIndex 1.3.6.1.4.1.1991.1.2.4.11.1.1.1
The table entry index of this Area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfAreaStatusAreaId 1.3.6.1.4.1.1991.1.2.4.11.1.1.2
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AreaID  

snOspfAreaStatusImportASExtern 1.3.6.1.4.1.1991.1.2.4.11.1.1.3
The area's support for importing AS external link- state advertisements.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfAreaStatusStubMetric 1.3.6.1.4.1.1991.1.2.4.11.1.1.4
The metric value applied at the default type of service(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT attempt of this Object will return NO_SUCH_NAME.
Status: mandatory Access: read-only
OBJECT-TYPE    
  BigMetric  

snOspfAreaStatusSpfRuns 1.3.6.1.4.1.1991.1.2.4.11.1.1.5
The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOspfAreaStatusAreaBdrRtrCount 1.3.6.1.4.1.1991.1.2.4.11.1.1.6
The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

snOspfAreaStatusASBdrRtrCount 1.3.6.1.4.1.1991.1.2.4.11.1.1.7
The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

snOspfAreaStatusLSACount 1.3.6.1.4.1.1991.1.2.4.11.1.1.8
The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

snOspfAreaStatusLSACksumSum 1.3.6.1.4.1.1991.1.2.4.11.1.1.9
The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfAreaStatusAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.11.1.1.10
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfIfStatusTable 1.3.6.1.4.1.1991.1.2.4.12.1
The OSPF Interface Status Table describes the interfaces from the viewpoint of OSPF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfIfStatusEntry

snOspfIfStatusEntry 1.3.6.1.4.1.1991.1.2.4.12.1.1
The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfIfStatusEntry  

snOspfIfStatusEntryIndex 1.3.6.1.4.1.1991.1.2.4.12.1.1.1
The table entry index of this Area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfIfStatusPort 1.3.6.1.4.1.1991.1.2.4.12.1.1.2
The physical router port of this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfIfStatusIpAddress 1.3.6.1.4.1.1991.1.2.4.12.1.1.3
The IP address of this OSPF interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfIfStatusAreaId 1.3.6.1.4.1.1991.1.2.4.12.1.1.4
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AreaID  

snOspfIfStatusType 1.3.6.1.4.1.1991.1.2.4.12.1.1.5
The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER broadcast(1), nbma(2), pointToPoint(3)  

snOspfIfStatusAdminStat 1.3.6.1.4.1.1991.1.2.4.12.1.1.6
The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RtrStatus  

snOspfIfStatusRtrPriority 1.3.6.1.4.1.1991.1.2.4.12.1.1.7
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DesignatedRouterPriority  

snOspfIfStatusTransitDelay 1.3.6.1.4.1.1991.1.2.4.12.1.1.8
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  UpToMaxAge  

snOspfIfStatusRetransInterval 1.3.6.1.4.1.1991.1.2.4.12.1.1.9
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  UpToMaxAge  

snOspfIfStatusHelloInterval 1.3.6.1.4.1.1991.1.2.4.12.1.1.10
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HelloRange  

snOspfIfStatusRtrDeadInterval 1.3.6.1.4.1.1991.1.2.4.12.1.1.11
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PositiveInteger  

snOspfIfStatusState 1.3.6.1.4.1.1991.1.2.4.12.1.1.12
The OSPF Interface State.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7)  

snOspfIfStatusDesignatedRouter 1.3.6.1.4.1.1991.1.2.4.12.1.1.13
The IP Address of the Designated Router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfIfStatusBackupDesignatedRouter 1.3.6.1.4.1.1991.1.2.4.12.1.1.14
The IP Address of the Backup Designated Router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfIfStatusEvents 1.3.6.1.4.1.1991.1.2.4.12.1.1.15
The number of times this OSPF interface has changed its state, or an error has occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOspfIfStatusAuthType 1.3.6.1.4.1.1991.1.2.4.12.1.1.16
The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfIfStatusAuthKey 1.3.6.1.4.1.1991.1.2.4.12.1.1.17
The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfStatusAuthKey always returns an Octet String of length zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

snOspfIfStatusMetricValue 1.3.6.1.4.1.1991.1.2.4.12.1.1.18
The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Metric  

snOspfIfStatusMd5AuthKeyId 1.3.6.1.4.1.1991.1.2.4.12.1.1.19
The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

snOspfIfStatusMd5AuthKey 1.3.6.1.4.1.1991.1.2.4.12.1.1.20
The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

snOspfIfStatusMd5ActivationWaitTime 1.3.6.1.4.1.1991.1.2.4.12.1.1.21
The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..14400  

snOspfIfStatusAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.12.1.1.22
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfVirtIfStatusTable 1.3.6.1.4.1.1991.1.2.4.13.1
Information about this router's virtual interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfVirtIfStatusEntry

snOspfVirtIfStatusEntry 1.3.6.1.4.1.1991.1.2.4.13.1.1
Information about a single Virtual Interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfVirtIfStatusEntry  

snOspfVirtIfStatusEntryIndex 1.3.6.1.4.1.1991.1.2.4.13.1.1.1
The table entry index of this Area.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfVirtIfStatusAreaID 1.3.6.1.4.1.1991.1.2.4.13.1.1.2
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
Status: mandatory Access: read-only
OBJECT-TYPE    
  AreaID  

snOspfVirtIfStatusNeighbor 1.3.6.1.4.1.1991.1.2.4.13.1.1.3
The Router ID of the Virtual Neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

snOspfVirtIfStatusTransitDelay 1.3.6.1.4.1.1991.1.2.4.13.1.1.4
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  UpToMaxAge  

snOspfVirtIfStatusRetransInterval 1.3.6.1.4.1.1991.1.2.4.13.1.1.5
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.
Status: mandatory Access: read-only
OBJECT-TYPE    
  UpToMaxAge  

snOspfVirtIfStatusHelloInterval 1.3.6.1.4.1.1991.1.2.4.13.1.1.6
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  HelloRange  

snOspfVirtIfStatusRtrDeadInterval 1.3.6.1.4.1.1991.1.2.4.13.1.1.7
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PositiveInteger  

snOspfVirtIfStatusState 1.3.6.1.4.1.1991.1.2.4.13.1.1.8
The OSPF virtual interfaces states.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(1), pointToPoint(4)  

snOspfVirtIfStatusEvents 1.3.6.1.4.1.1991.1.2.4.13.1.1.9
The number of state changes or error events on this Virtual Link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

snOspfVirtIfStatusAuthType 1.3.6.1.4.1.1991.1.2.4.13.1.1.10
The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfVirtIfStatusAuthKey 1.3.6.1.4.1.1991.1.2.4.13.1.1.11
If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..8)  

snOspfVirtIfStatusMd5AuthKeyId 1.3.6.1.4.1.1991.1.2.4.13.1.1.12
The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Identifiers are unique per-interface (or equivalently, per-subnet).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

snOspfVirtIfStatusMd5AuthKey 1.3.6.1.4.1.1991.1.2.4.13.1.1.13
The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

snOspfVirtIfStatusMd5ActivationWaitTime 1.3.6.1.4.1.1991.1.2.4.13.1.1.14
The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..14400  

snOspfVirtIfStatusAreaIdFormat 1.3.6.1.4.1.1991.1.2.4.13.1.1.15
This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER integer(0), ipAddress(1)  

snOspfRoutingInfoTable 1.3.6.1.4.1.1991.1.2.4.14.1
Information about this router's routing information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnOspfRoutingInfoEntry

snOspfRoutingInfoEntry 1.3.6.1.4.1.1991.1.2.4.14.1.1
Information about a single ABR/ASBR Routing entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SnOspfRoutingInfoEntry  

snOspfRoutingInfoIndex 1.3.6.1.4.1.1991.1.2.4.14.1.1.1
The table entry index of this Routing entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfRoutingInfoRouterID 1.3.6.1.4.1.1991.1.2.4.14.1.1.2
The Router ID of the destination router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

snOspfRoutingInfoRouterType 1.3.6.1.4.1.1991.1.2.4.14.1.1.3
The Router type of the destination router as the following: abr (1) -- area border router. asbr (2) -- autonomous sytem border router. abrANDasbr(3) -- area border and autonomous system border router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER abr(1), asbr(2), abrANDasbr(3)  

snOspfRoutingInfoNextHopRouterID 1.3.6.1.4.1.1991.1.2.4.14.1.1.4
The router ID of the next hop destination router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  RouterID  

snOspfRoutingInfoOutgoingInterface 1.3.6.1.4.1.1991.1.2.4.14.1.1.5
The outgoing interface of the destination router.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

snOspfSetTrap 1.3.6.1.4.1.1991.1.2.4.15.1
A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

snOspfConfigErrorType 1.3.6.1.4.1.1991.1.2.4.15.2
Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unUsed(0), badVersion(1), areaMismatch(2), unknownNbmaNbr(3), unknownVirtualNbr(4), authTypeMismatch(5), authFailure(6), netMaskMismatch(7), helloIntervalMismatch(8), deadIntervalMismatch(9), optionMismatch(10)  

snOspfPacketType 1.3.6.1.4.1.1991.1.2.4.15.3
OSPF packet types.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unUsed(0), hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5)  

snOspfPacketSrc 1.3.6.1.4.1.1991.1.2.4.15.4
The IP address of an inbound packet that can- not be identified by a neighbor instance.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

snOspfTrapsGenerationMode 1.3.6.1.4.1.1991.1.2.4.15.5
Indicates if the generation of any OSPF traps is permitted on the router. The value 'enabled' denotes that the OSPF Traps can be generated by the router; 'disabled' denotes that the OSPF Traps can not be generated by the router even when snOspfSetTrap indicates the generation of specific OSPF Traps. This object provides global control on the generation of ospf traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RtrStatus  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor