FOUNDRY-SN-IPX-MIB

File: FOUNDRY-SN-IPX-MIB.mib (34102 bytes)

Imported modules

RFC1155-SMI RFC-1212 FOUNDRY-SN-ROOT-MIB

Imported symbols

Counter OBJECT-TYPE snIpx

Defined Types

RtrStatus  
INTEGER disabled(0), enabled(1)    

ClearStatus  
INTEGER normal(0), clear(1)    

PortIndex  
INTEGER 1..3900    

Action  
INTEGER deny(0), permit(1)    

PhysAddress  
STRING    

NetNumber  
STRING Size(4)    

SnIpxCacheEntry  
SEQUENCE    
  snIpxCacheIndex INTEGER
  snIpxCacheNetNum NetNumber
  snIpxCacheNode PhysAddress
  snIpxCacheOutFilter RtrStatus
  snIpxCacheEncap INTEGER
  snIpxCachePort PortIndex

SnIpxRouteEntry  
SEQUENCE    
  snIpxRouteIndex INTEGER
  snIpxDestNetNum NetNumber
  snIpxFwdRouterNode PhysAddress
  snIpxDestHopCnts INTEGER
  snIpxRouteMetric INTEGER
  snIpxDestPort INTEGER

SnIpxServerEntry  
SEQUENCE    
  snIpxServerIndex INTEGER
  snIpxServerType INTEGER
  snIpxServerNetNum NetNumber
  snIpxServerNode PhysAddress
  snIpxServerSocket INTEGER
  snIpxServerHopCnts INTEGER
  snIpxServerName STRING

SnIpxFwdFilterEntry  
SEQUENCE    
  snIpxFwdFilterId INTEGER
  snIpxFwdFilterAction Action
  snIpxFwdFilterSocket INTEGER
  snIpxFwdFilterSrcNet NetNumber
  snIpxFwdFilterSrcNode PhysAddress
  snIpxFwdFilterDestNet NetNumber
  snIpxFwdFilterDestNode PhysAddress
  snIpxFwdFilterRowStatus INTEGER

SnIpxRipFilterEntry  
SEQUENCE    
  snIpxRipFilterId INTEGER
  snIpxRipFilterAction Action
  snIpxRipFilterNet NetNumber
  snIpxRipFilterMask NetNumber
  snIpxRipFilterRowStatus INTEGER

SnIpxSapFilterEntry  
SEQUENCE    
  snIpxSapFilterId INTEGER
  snIpxSapFilterAction Action
  snIpxSapFilterType INTEGER
  snIpxSapFilterName STRING
  snIpxSapFilterRowStatus INTEGER

SnIpxIfFwdAccessEntry  
SEQUENCE    
  snIpxIfFwdAccessPort INTEGER
  snIpxIfFwdAccessDir INTEGER
  snIpxIfFwdAccessFilterList STRING
  snIpxIfFwdAccessRowStatus INTEGER

SnIpxIfRipAccessEntry  
SEQUENCE    
  snIpxIfRipAccessPort INTEGER
  snIpxIfRipAccessDir INTEGER
  snIpxIfRipAccessFilterList STRING
  snIpxIfRipAccessRowStatus INTEGER

SnIpxIfSapAccessEntry  
SEQUENCE    
  snIpxIfSapAccessPort INTEGER
  snIpxIfSapAccessDir INTEGER
  snIpxIfSapAccessFilterList STRING
  snIpxIfSapAccessRowStatus INTEGER

SnIpxPortAddrEntry  
SEQUENCE    
  snIpxPortAddrPort PortIndex
  snIpxPortAddrEncap INTEGER
  snIpxPortAddrNetNum NetNumber
  snIpxPortAddrRowStatus INTEGER
  snIpxPortAddrNetBiosFilterMode RtrStatus

SnIpxPortCountersEntry  
SEQUENCE    
  snIpxPortCountersPort PortIndex
  snIpxPortCountersRcvPktsCnt Counter
  snIpxPortCountersTxPktsCnt Counter
  snIpxPortCountersFwdPktsCnt Counter
  snIpxPortCountersRcvDropPktsCnt Counter
  snIpxPortCountersTxDropPktsCnt Counter
  snIpxPortCountersRcvFiltPktsCnt Counter
  snIpxPortCountersTxFiltPktsCnt Counter

Defined Values

snIpxGen 1.3.6.1.4.1.1991.1.2.1.1
OBJECT IDENTIFIER    

snIpxCache 1.3.6.1.4.1.1991.1.2.1.2
OBJECT IDENTIFIER    

snIpxRoute 1.3.6.1.4.1.1991.1.2.1.3
OBJECT IDENTIFIER    

snIpxServer 1.3.6.1.4.1.1991.1.2.1.4
OBJECT IDENTIFIER    

snIpxFwdFilter 1.3.6.1.4.1.1991.1.2.1.5
OBJECT IDENTIFIER    

snIpxRipFilter 1.3.6.1.4.1.1991.1.2.1.6
OBJECT IDENTIFIER    

snIpxSapFilter 1.3.6.1.4.1.1991.1.2.1.7
OBJECT IDENTIFIER    

snIpxIfFwdAccess 1.3.6.1.4.1.1991.1.2.1.8
OBJECT IDENTIFIER    

snIpxIfRipAccess 1.3.6.1.4.1.1991.1.2.1.9
OBJECT IDENTIFIER    

snIpxIfSapAccess 1.3.6.1.4.1.1991.1.2.1.10
OBJECT IDENTIFIER    

snIpxPortAddr 1.3.6.1.4.1.1991.1.2.1.11
OBJECT IDENTIFIER    

snIpxPortCounters 1.3.6.1.4.1.1991.1.2.1.12
OBJECT IDENTIFIER    

snIpxRoutingMode 1.3.6.1.4.1.1991.1.2.1.1.1
Enabled/Disabled System IPX Routing Mode status.
OBJECT-TYPE    
  RtrStatus  

snIpxNetBiosFilterMode 1.3.6.1.4.1.1991.1.2.1.1.2
Enabled/Disabled NetBios Filter Mode status.
OBJECT-TYPE    
  RtrStatus  

snIpxClearCache 1.3.6.1.4.1.1991.1.2.1.1.3
clear(1) will clear cache table.
OBJECT-TYPE    
  ClearStatus  

snIpxClearRoute 1.3.6.1.4.1.1991.1.2.1.1.4
clear(1) will clear ipx route table.
OBJECT-TYPE    
  ClearStatus  

snIpxClearTrafficCnts 1.3.6.1.4.1.1991.1.2.1.1.5
clear(1) will clear ipx all traffic counters. - snIpxRcvPktsCnt, snIpxFwdPktsCnt, snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt, snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt.
OBJECT-TYPE    
  ClearStatus  

snIpxRcvPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.6
IPX incoming packets counter.
OBJECT-TYPE    
  Counter  

snIpxTxPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.7
IPX Outgoing packets counter.
OBJECT-TYPE    
  Counter  

snIpxFwdPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.8
IPX forwarding packets counter.
OBJECT-TYPE    
  Counter  

snIpxRcvDropPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.9
IPX receiving drop packets counter.
OBJECT-TYPE    
  Counter  

snIpxRcvFiltPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.10
IPX receiving filter packets counter.
OBJECT-TYPE    
  Counter  

snIpxRipGblFiltList 1.3.6.1.4.1.1991.1.2.1.1.11
An IPX RIP Global Filter List.
OBJECT-TYPE    
  STRING Size(1..32)  

snIpxRipFiltOnAllPort 1.3.6.1.4.1.1991.1.2.1.1.12
Apply the IPX RIP Global filter list snIpxRipGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all RIP filter lists to/from all ports. Prior to sending this command, snIpxRipGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
OBJECT-TYPE    
  INTEGER valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5)  

snIpxSapGblFiltList 1.3.6.1.4.1.1991.1.2.1.1.13
An IPX SAP Global Filter List.
OBJECT-TYPE    
  STRING Size(1..32)  

snIpxSapFiltOnAllPort 1.3.6.1.4.1.1991.1.2.1.1.14
Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/from all ports. Prior to sending this command, snIpxSapGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid
OBJECT-TYPE    
  INTEGER valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5)  

snIpxTxDropPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.15
IPX transmitting drop packets counter.
OBJECT-TYPE    
  Counter  

snIpxTxFiltPktsCnt 1.3.6.1.4.1.1991.1.2.1.1.16
IPX transmitting filter packets counter.
OBJECT-TYPE    
  Counter  

snIpxCacheTable 1.3.6.1.4.1.1991.1.2.1.2.1
IPX Cache table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxCacheEntry

snIpxCacheEntry 1.3.6.1.4.1.1991.1.2.1.2.1.1
An entry in the IPX Cache table.
OBJECT-TYPE    
  SnIpxCacheEntry  

snIpxCacheIndex 1.3.6.1.4.1.1991.1.2.1.2.1.1.1
The table index for a IPX Cache entry.
OBJECT-TYPE    
  INTEGER  

snIpxCacheNetNum 1.3.6.1.4.1.1991.1.2.1.2.1.1.2
Cache Network number.
OBJECT-TYPE    
  NetNumber  

snIpxCacheNode 1.3.6.1.4.1.1991.1.2.1.2.1.1.3
Cache Node Number.
OBJECT-TYPE    
  PhysAddress  

snIpxCacheOutFilter 1.3.6.1.4.1.1991.1.2.1.2.1.1.4
Cache Outbound Filter is ether disabled(0) or enabled(1).
OBJECT-TYPE    
  RtrStatus  

snIpxCacheEncap 1.3.6.1.4.1.1991.1.2.1.2.1.1.5
The IPX encapsulation frame type.
OBJECT-TYPE    
  INTEGER ethernetII(1), ethernet8022(2), ethernet8023(3), ethernetSnap(4)  

snIpxCachePort 1.3.6.1.4.1.1991.1.2.1.2.1.1.6
IPX Router Port number.
OBJECT-TYPE    
  PortIndex  

snIpxRouteTable 1.3.6.1.4.1.1991.1.2.1.3.1
IPX route table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxRouteEntry

snIpxRouteEntry 1.3.6.1.4.1.1991.1.2.1.3.1.1
An entry in the IPX route table.
OBJECT-TYPE    
  SnIpxRouteEntry  

snIpxRouteIndex 1.3.6.1.4.1.1991.1.2.1.3.1.1.1
The table index for a IPX route entry.
OBJECT-TYPE    
  INTEGER  

snIpxDestNetNum 1.3.6.1.4.1.1991.1.2.1.3.1.1.2
Destination Network number.
OBJECT-TYPE    
  NetNumber  

snIpxFwdRouterNode 1.3.6.1.4.1.1991.1.2.1.3.1.1.3
Forward Router Node Number.
OBJECT-TYPE    
  PhysAddress  

snIpxDestHopCnts 1.3.6.1.4.1.1991.1.2.1.3.1.1.4
Number of hops to reach the destination.
OBJECT-TYPE    
  INTEGER  

snIpxRouteMetric 1.3.6.1.4.1.1991.1.2.1.3.1.1.5
The metrics to next hop router.
OBJECT-TYPE    
  INTEGER  

snIpxDestPort 1.3.6.1.4.1.1991.1.2.1.3.1.1.6
The destination port.
OBJECT-TYPE    
  INTEGER  

snIpxServerTable 1.3.6.1.4.1.1991.1.2.1.4.1
IPX Server table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxServerEntry

snIpxServerEntry 1.3.6.1.4.1.1991.1.2.1.4.1.1
An entry in the IPX Server table.
OBJECT-TYPE    
  SnIpxServerEntry  

snIpxServerIndex 1.3.6.1.4.1.1991.1.2.1.4.1.1.1
The table index for a IPX Server entry.
OBJECT-TYPE    
  INTEGER  

snIpxServerType 1.3.6.1.4.1.1991.1.2.1.4.1.1.2
IPX Server Type.
OBJECT-TYPE    
  INTEGER  

snIpxServerNetNum 1.3.6.1.4.1.1991.1.2.1.4.1.1.3
Server Network number.
OBJECT-TYPE    
  NetNumber  

snIpxServerNode 1.3.6.1.4.1.1991.1.2.1.4.1.1.4
Server Node Number.
OBJECT-TYPE    
  PhysAddress  

snIpxServerSocket 1.3.6.1.4.1.1991.1.2.1.4.1.1.5
Server Socket Number.
OBJECT-TYPE    
  INTEGER  

snIpxServerHopCnts 1.3.6.1.4.1.1991.1.2.1.4.1.1.6
Number of intervening networks to reach the server.
OBJECT-TYPE    
  INTEGER  

snIpxServerName 1.3.6.1.4.1.1991.1.2.1.4.1.1.7
IPX Server Name.
OBJECT-TYPE    
  STRING Size(0..47)  

snIpxFwdFilterTable 1.3.6.1.4.1.1991.1.2.1.5.1
IPX Forward Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxFwdFilterEntry

snIpxFwdFilterEntry 1.3.6.1.4.1.1991.1.2.1.5.1.1
An entry in the IPX Forward Filter table.
OBJECT-TYPE    
  SnIpxFwdFilterEntry  

snIpxFwdFilterId 1.3.6.1.4.1.1991.1.2.1.5.1.1.1
The filter ID for a filter entry.
OBJECT-TYPE    
  INTEGER  

snIpxFwdFilterAction 1.3.6.1.4.1.1991.1.2.1.5.1.1.2
Action to take if the ipx packet match with this filter.
OBJECT-TYPE    
  Action  

snIpxFwdFilterSocket 1.3.6.1.4.1.1991.1.2.1.5.1.1.3
IPX Forward Filter Socket Number.
OBJECT-TYPE    
  INTEGER  

snIpxFwdFilterSrcNet 1.3.6.1.4.1.1991.1.2.1.5.1.1.4
Source Network Number.
OBJECT-TYPE    
  NetNumber  

snIpxFwdFilterSrcNode 1.3.6.1.4.1.1991.1.2.1.5.1.1.5
Source Node Number.
OBJECT-TYPE    
  PhysAddress  

snIpxFwdFilterDestNet 1.3.6.1.4.1.1991.1.2.1.5.1.1.6
Destination Network Number.
OBJECT-TYPE    
  NetNumber  

snIpxFwdFilterDestNode 1.3.6.1.4.1.1991.1.2.1.5.1.1.7
Destination Node Number.
OBJECT-TYPE    
  PhysAddress  

snIpxFwdFilterRowStatus 1.3.6.1.4.1.1991.1.2.1.5.1.1.8
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpxRipFilterTable 1.3.6.1.4.1.1991.1.2.1.6.1
IPX RIP Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxRipFilterEntry

snIpxRipFilterEntry 1.3.6.1.4.1.1991.1.2.1.6.1.1
An entry in the IPX RIP Filter table.
OBJECT-TYPE    
  SnIpxRipFilterEntry  

snIpxRipFilterId 1.3.6.1.4.1.1991.1.2.1.6.1.1.1
The filter ID for a filter entry.
OBJECT-TYPE    
  INTEGER  

snIpxRipFilterAction 1.3.6.1.4.1.1991.1.2.1.6.1.1.2
Action to take if the ipx packet match with this filter.
OBJECT-TYPE    
  Action  

snIpxRipFilterNet 1.3.6.1.4.1.1991.1.2.1.6.1.1.3
IPX RIP Filter Network number.
OBJECT-TYPE    
  NetNumber  

snIpxRipFilterMask 1.3.6.1.4.1.1991.1.2.1.6.1.1.4
IPX RIP Filter Network/Subnet Mask.
OBJECT-TYPE    
  NetNumber  

snIpxRipFilterRowStatus 1.3.6.1.4.1.1991.1.2.1.6.1.1.5
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpxSapFilterTable 1.3.6.1.4.1.1991.1.2.1.7.1
IPX SAP Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxSapFilterEntry

snIpxSapFilterEntry 1.3.6.1.4.1.1991.1.2.1.7.1.1
An entry in the IPX SAP Filter table.
OBJECT-TYPE    
  SnIpxSapFilterEntry  

snIpxSapFilterId 1.3.6.1.4.1.1991.1.2.1.7.1.1.1
The filter ID for a filter entry.
OBJECT-TYPE    
  INTEGER  

snIpxSapFilterAction 1.3.6.1.4.1.1991.1.2.1.7.1.1.2
Action to take if the ipx packet match with this filter.
OBJECT-TYPE    
  Action  

snIpxSapFilterType 1.3.6.1.4.1.1991.1.2.1.7.1.1.3
IPX SAP Filter type to be matched.
OBJECT-TYPE    
  INTEGER  

snIpxSapFilterName 1.3.6.1.4.1.1991.1.2.1.7.1.1.4
IPX SAP Filter Name.
OBJECT-TYPE    
  STRING Size(0..47)  

snIpxSapFilterRowStatus 1.3.6.1.4.1.1991.1.2.1.7.1.1.5
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpxIfFwdAccessTable 1.3.6.1.4.1.1991.1.2.1.8.1
IPX IF Forward Access table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxIfFwdAccessEntry

snIpxIfFwdAccessEntry 1.3.6.1.4.1.1991.1.2.1.8.1.1
An entry in the IPX Forward Access table.
OBJECT-TYPE    
  SnIpxIfFwdAccessEntry  

snIpxIfFwdAccessPort 1.3.6.1.4.1.1991.1.2.1.8.1.1.1
The IPX interface to which the Forward Filter applies.
OBJECT-TYPE    
  INTEGER  

snIpxIfFwdAccessDir 1.3.6.1.4.1.1991.1.2.1.8.1.1.2
The access direction of incoming packet filter or outgoing packet filter.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

snIpxIfFwdAccessFilterList 1.3.6.1.4.1.1991.1.2.1.8.1.1.3
An IPX IF Forward Filter List.
OBJECT-TYPE    
  STRING Size(1..32)  

snIpxIfFwdAccessRowStatus 1.3.6.1.4.1.1991.1.2.1.8.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpxIfRipAccessTable 1.3.6.1.4.1.1991.1.2.1.9.1
IPX IF RIP Access table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxIfRipAccessEntry

snIpxIfRipAccessEntry 1.3.6.1.4.1.1991.1.2.1.9.1.1
An entry in the IPX Forward Access table.
OBJECT-TYPE    
  SnIpxIfRipAccessEntry  

snIpxIfRipAccessPort 1.3.6.1.4.1.1991.1.2.1.9.1.1.1
The IPX interface to which the RIP Filter applies.
OBJECT-TYPE    
  INTEGER  

snIpxIfRipAccessDir 1.3.6.1.4.1.1991.1.2.1.9.1.1.2
The access direction of incoming packet filter or outgoing packet filter.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

snIpxIfRipAccessFilterList 1.3.6.1.4.1.1991.1.2.1.9.1.1.3
An IPX IF RIP Access Filter List.
OBJECT-TYPE    
  STRING Size(1..32)  

snIpxIfRipAccessRowStatus 1.3.6.1.4.1.1991.1.2.1.9.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpxIfSapAccessTable 1.3.6.1.4.1.1991.1.2.1.10.1
IPX IF RIP Access table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxIfSapAccessEntry

snIpxIfSapAccessEntry 1.3.6.1.4.1.1991.1.2.1.10.1.1
An entry in the IPX Forward Access table.
OBJECT-TYPE    
  SnIpxIfSapAccessEntry  

snIpxIfSapAccessPort 1.3.6.1.4.1.1991.1.2.1.10.1.1.1
The IPX interface to which the SAP Filter applies.
OBJECT-TYPE    
  INTEGER  

snIpxIfSapAccessDir 1.3.6.1.4.1.1991.1.2.1.10.1.1.2
The access direction of incoming packet filter or outgoing packet filter.
OBJECT-TYPE    
  INTEGER in(1), out(2)  

snIpxIfSapAccessFilterList 1.3.6.1.4.1.1991.1.2.1.10.1.1.3
An IPX IF SAP Access Filter List.
OBJECT-TYPE    
  STRING Size(1..32)  

snIpxIfSapAccessRowStatus 1.3.6.1.4.1.1991.1.2.1.10.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpxPortAddrTable 1.3.6.1.4.1.1991.1.2.1.11.1
IPX port address table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxPortAddrEntry

snIpxPortAddrEntry 1.3.6.1.4.1.1991.1.2.1.11.1.1
An entry in the IPX Port Address table.
OBJECT-TYPE    
  SnIpxPortAddrEntry  

snIpxPortAddrPort 1.3.6.1.4.1.1991.1.2.1.11.1.1.1
The port index for port address entry.
OBJECT-TYPE    
  PortIndex  

snIpxPortAddrEncap 1.3.6.1.4.1.1991.1.2.1.11.1.1.2
The IPX encapsulation type. ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4) Note: Each Network Number can be assigned with one unique Frame type; Otherwise, a SNMP-SET error will be returned.
OBJECT-TYPE    
  INTEGER ethernet8022(1), ethernet8023(2), ethernetII(3), ethernetSnap(4)  

snIpxPortAddrNetNum 1.3.6.1.4.1.1991.1.2.1.11.1.1.3
An unique Network number for the IPX interface port.
OBJECT-TYPE    
  NetNumber  

snIpxPortAddrRowStatus 1.3.6.1.4.1.1991.1.2.1.11.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snIpxPortAddrNetBiosFilterMode 1.3.6.1.4.1.1991.1.2.1.11.1.1.5
Enabled/Disabled NetBios Filter Mode status per Port Address entry.
OBJECT-TYPE    
  RtrStatus  

snIpxPortCountersTable 1.3.6.1.4.1.1991.1.2.1.12.1
IPX port Counters table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnIpxPortCountersEntry

snIpxPortCountersEntry 1.3.6.1.4.1.1991.1.2.1.12.1.1
An entry in the IPX Port Counters table.
OBJECT-TYPE    
  SnIpxPortCountersEntry  

snIpxPortCountersPort 1.3.6.1.4.1.1991.1.2.1.12.1.1.1
The port index for port Counters entry.
OBJECT-TYPE    
  PortIndex  

snIpxPortCountersRcvPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.2
IPX incoming packets counter for the interface.
OBJECT-TYPE    
  Counter  

snIpxPortCountersTxPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.3
IPX Outgoing packets counter for the interface.
OBJECT-TYPE    
  Counter  

snIpxPortCountersFwdPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.4
IPX forwarding packets counter for the interface.
OBJECT-TYPE    
  Counter  

snIpxPortCountersRcvDropPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.5
IPX receiving drop packets counter for the interface.
OBJECT-TYPE    
  Counter  

snIpxPortCountersTxDropPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.6
IPX transmitting drop packets counter for the interface.
OBJECT-TYPE    
  Counter  

snIpxPortCountersRcvFiltPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.7
IPX receiving filter packets counter for the interface.
OBJECT-TYPE    
  Counter  

snIpxPortCountersTxFiltPktsCnt 1.3.6.1.4.1.1991.1.2.1.12.1.1.8
IPX transmitting filter packets counter for the interface.
OBJECT-TYPE    
  Counter