FOUNDRY-SN-BGP4-GROUP-MIB

File: FOUNDRY-SN-BGP4-GROUP-MIB.mib (89921 bytes)

Imported modules

RFC1155-SMI RFC-1212 FOUNDRY-SN-ROOT-MIB

Imported symbols

Counter Gauge IpAddress
OBJECT-TYPE snBgp4

Defined Types

SnBgp4AddrFilterEntry  
SEQUENCE    
  snBgp4AddrFilterIndex INTEGER
  snBgp4AddrFilterAction INTEGER
  snBgp4AddrFilterSourceIp IpAddress
  snBgp4AddrFilterSourceMask IpAddress
  snBgp4AddrFilterDestIp IpAddress
  snBgp4AddrFilterDestMask IpAddress
  snBgp4AddrFilterRowStatus INTEGER

SnBgp4AggregateAddrEntry  
SEQUENCE    
  snBgp4AggregateAddrIp IpAddress
  snBgp4AggregateAddrMask IpAddress
  snBgp4AggregateAddrOption INTEGER
  snBgp4AggregateAddrMap STRING
  snBgp4AggregateAddrRowStatus INTEGER

SnBgp4AsPathFilterEntry  
SEQUENCE    
  snBgp4AsPathFilterIndex INTEGER
  snBgp4AsPathFilterAction INTEGER
  snBgp4AsPathFilterRegExpression STRING
  snBgp4AsPathFilterRowStatus INTEGER

SnBgp4CommunityFilterEntry  
SEQUENCE    
  snBgp4CommunityFilterIndex INTEGER
  snBgp4CommunityFilterAction INTEGER
  snBgp4CommunityFilterCommNum STRING
  snBgp4CommunityFilterInternet INTEGER
  snBgp4CommunityFilterNoAdvertise INTEGER
  snBgp4CommunityFilterNoExport INTEGER
  snBgp4CommunityFilterRowStatus INTEGER
  snBgp4CommunityFilterLocalAs INTEGER

SnBgp4NeighGenCfgEntry  
SEQUENCE    
  snBgp4NeighGenCfgNeighIp IpAddress
  snBgp4NeighGenCfgAdvertlevel INTEGER
  snBgp4NeighGenCfgDefOriginate INTEGER
  snBgp4NeighGenCfgEbgpMultihop INTEGER
  snBgp4NeighGenCfgMaxPrefix INTEGER
  snBgp4NeighGenCfgNextHopSelf INTEGER
  snBgp4NeighGenCfgRemoteAs INTEGER
  snBgp4NeighGenCfgSendComm INTEGER
  snBgp4NeighGenCfgWeight INTEGER
  snBgp4NeighGenCfgWeightFilterList STRING
  snBgp4NeighGenCfgRowStatus INTEGER
  snBgp4NeighGenCfgUpdateSrcLpbIntf INTEGER
  snBgp4NeighGenCfgRouteRefClient INTEGER
  snBgp4NeighGenCfgRemovePrivateAs INTEGER
  snBgp4NeighGenCfgEbgpMultihopTtl INTEGER
  snBgp4NeighGenCfgShutdown INTEGER
  snBgp4NeighGenCfgKeepAliveTime INTEGER
  snBgp4NeighGenCfgHoldTime INTEGER
  snBgp4NeighGenCfgDefOrigMap STRING
  snBgp4NeighGenCfgDesc STRING
  snBgp4NeighGenCfgPass STRING

SnBgp4NeighDistGroupEntry  
SEQUENCE    
  snBgp4NeighDistGroupNeighIp IpAddress
  snBgp4NeighDistGroupDir INTEGER
  snBgp4NeighDistGroupAccessList STRING
  snBgp4NeighDistGroupRowStatus INTEGER
  snBgp4NeighDistGroupInFilterList STRING
  snBgp4NeighDistGroupOutFilterList STRING
  snBgp4NeighDistGroupInIpAccessList STRING
  snBgp4NeighDistGroupOutIpAccessList STRING
  snBgp4NeighDistGroupInPrefixList STRING
  snBgp4NeighDistGroupOutPrefixList STRING

SnBgp4NeighFilterGroupEntry  
SEQUENCE    
  snBgp4NeighFilterGroupNeighIp IpAddress
  snBgp4NeighFilterGroupDir INTEGER
  snBgp4NeighFilterGroupAccessList STRING
  snBgp4NeighFilterGroupRowStatus INTEGER
  snBgp4NeighFilterGroupInFilterList STRING
  snBgp4NeighFilterGroupOutFilterList STRING
  snBgp4NeighFilterGroupInAsPathAccessList STRING
  snBgp4NeighFilterGroupOutAsPathAccessList STRING
  snBgp4NeighFilterGroupWeight INTEGER
  snBgp4NeighFilterGroupWeightAccessList STRING

SnBgp4NeighRouteMapEntry  
SEQUENCE    
  snBgp4NeighRouteMapNeighIp IpAddress
  snBgp4NeighRouteMapDir INTEGER
  snBgp4NeighRouteMapMapName STRING
  snBgp4NeighRouteMapRowStatus INTEGER

SnBgp4NetworkEntry  
SEQUENCE    
  snBgp4NetworkIp IpAddress
  snBgp4NetworkSubnetMask IpAddress
  snBgp4NetworkWeight INTEGER
  snBgp4NetworkBackdoor INTEGER
  snBgp4NetworkRowStatus INTEGER

SnBgp4RedisEntry  
SEQUENCE    
  snBgp4RedisProtocol INTEGER
  snBgp4RedisMetric INTEGER
  snBgp4RedisRouteMap STRING
  snBgp4RedisWeight INTEGER
  snBgp4RedisMatchInternal INTEGER
  snBgp4RedisMatchExternal1 INTEGER
  snBgp4RedisMatchExternal2 INTEGER
  snBgp4RedisRowStatus INTEGER

SnBgp4RouteMapFilterEntry  
SEQUENCE    
  snBgp4RouteMapFilterMapName STRING
  snBgp4RouteMapFilterSequenceNum INTEGER
  snBgp4RouteMapFilterAction INTEGER
  snBgp4RouteMapFilterRowStatus INTEGER

SnBgp4RouteMapMatchEntry  
SEQUENCE    
  snBgp4RouteMapMatchMapName STRING
  snBgp4RouteMapMatchSequenceNum INTEGER
  snBgp4RouteMapMatchAsPathFilter STRING
  snBgp4RouteMapMatchCommunityFilter STRING
  snBgp4RouteMapMatchAddressFilter STRING
  snBgp4RouteMapMatchMetric INTEGER
  snBgp4RouteMapMatchNextHopList STRING
  snBgp4RouteMapMatchRouteType INTEGER
  snBgp4RouteMapMatchTagList STRING
  snBgp4RouteMapMatchRowMask INTEGER
  snBgp4RouteMapMatchAsPathAccessList STRING
  snBgp4RouteMapMatchCommunityList STRING
  snBgp4RouteMapMatchAddressAccessList STRING
  snBgp4RouteMapMatchAddressPrefixList STRING
  snBgp4RouteMapMatchNextHopAccessList STRING
  snBgp4RouteMapMatchNextHopPrefixList STRING

SnBgp4RouteMapSetEntry  
SEQUENCE    
  snBgp4RouteMapSetMapName STRING
  snBgp4RouteMapSetSequenceNum INTEGER
  snBgp4RouteMapSetAsPathType INTEGER
  snBgp4RouteMapSetAsPathString STRING
  snBgp4RouteMapSetAutoTag INTEGER
  snBgp4RouteMapSetCommunityType INTEGER
  snBgp4RouteMapSetCommunityNum INTEGER
  snBgp4RouteMapSetCommunityAdditive INTEGER
  snBgp4RouteMapSetLocalPreference INTEGER
  snBgp4RouteMapSetMetric INTEGER
  snBgp4RouteMapSetNextHop IpAddress
  snBgp4RouteMapSetOrigin INTEGER
  snBgp4RouteMapSetTag INTEGER
  snBgp4RouteMapSetWeight INTEGER
  snBgp4RouteMapSetRowMask INTEGER
  snBgp4RouteMapSetCommunityNums STRING
  snBgp4RouteMapSetDampenHalfLife INTEGER
  snBgp4RouteMapSetDampenReuse INTEGER
  snBgp4RouteMapSetDampenSuppress INTEGER
  snBgp4RouteMapSetDampenMaxSuppress INTEGER

SnBgp4NeighOperStatusEntry  
SEQUENCE    
  snBgp4NeighOperStatusIndex INTEGER
  snBgp4NeighOperStatusIp IpAddress
  snBgp4NeighOperStatusRemoteAs INTEGER
  snBgp4NeighOperStatusBgpType INTEGER
  snBgp4NeighOperStatusState INTEGER
  snBgp4NeighOperStatusKeepAliveTime INTEGER
  snBgp4NeighOperStatusHoldTime INTEGER
  snBgp4NeighOperStatusAdvertlevel INTEGER
  snBgp4NeighOperStatusKeepAliveTxCounts Counter
  snBgp4NeighOperStatusKeepAliveRxCounts Counter
  snBgp4NeighOperStatusUpdateTxCounts Counter
  snBgp4NeighOperStatusUpdateRxCounts Counter
  snBgp4NeighOperStatusNotifTxCounts Counter
  snBgp4NeighOperStatusNotifRxCounts Counter
  snBgp4NeighOperStatusOpenTxCounts Counter
  snBgp4NeighOperStatusOpenRxCounts Counter

SnBgp4RouteOperStatusEntry  
SEQUENCE    
  snBgp4RouteOperStatusIndex INTEGER
  snBgp4RouteOperStatusIp IpAddress
  snBgp4RouteOperStatusSubnetMask IpAddress
  snBgp4RouteOperStatusNextHop IpAddress
  snBgp4RouteOperStatusMetric INTEGER
  snBgp4RouteOperStatusLocalPreference INTEGER
  snBgp4RouteOperStatusWeight INTEGER
  snBgp4RouteOperStatusOrigin INTEGER
  snBgp4RouteOperStatusStatus INTEGER
  snBgp4RouteOperStatusRouteTag INTEGER
  snBgp4RouteOperStatusCommunityList STRING
  snBgp4RouteOperStatusAsPathList STRING

SnBgp4NeighborSummaryEntry  
SEQUENCE    
  snBgp4NeighborSummaryIndex INTEGER
  snBgp4NeighborSummaryIp IpAddress
  snBgp4NeighborSummaryState INTEGER
  snBgp4NeighborSummaryStateChgTime INTEGER
  snBgp4NeighborSummaryRouteReceived INTEGER
  snBgp4NeighborSummaryRouteInstalled INTEGER

SnBgp4AttributeEntry  
SEQUENCE    
  snBgp4AttributeIndex INTEGER
  snBgp4AttributeNextHop IpAddress
  snBgp4AttributeMetric INTEGER
  snBgp4AttributeOrigin INTEGER
  snBgp4AttributeAggregatorAs INTEGER
  snBgp4AttributeRouterId IpAddress
  snBgp4AttributeAtomicAggregatePresent INTEGER
  snBgp4AttributeLocalPreference INTEGER
  snBgp4AttributeCommunityList STRING
  snBgp4AttributeAsPathList STRING
  snBgp4AttributeOriginator IpAddress
  snBgp4AttributeClusterList STRING

SnBgp4ClearNeighborCmdEntry  
SEQUENCE    
  snBgp4ClearNeighborCmdIp IpAddress
  snBgp4ClearNeighborCmdElement INTEGER

SnBgp4NeighPrefixGroupEntry  
SEQUENCE    
  snBgp4NeighPrefixGroupNeighIp IpAddress
  snBgp4NeighPrefixGroupDir INTEGER
  snBgp4NeighPrefixGroupInAccessList STRING
  snBgp4NeighPrefixGroupOutAccessList STRING
  snBgp4NeighPrefixGroupRowStatus INTEGER

Defined Values

snBgp4Gen 1.3.6.1.4.1.1991.1.2.11.1
OBJECT IDENTIFIER    

snBgp4AddrFilter 1.3.6.1.4.1.1991.1.2.11.2
OBJECT IDENTIFIER    

snBgp4AggregateAddr 1.3.6.1.4.1.1991.1.2.11.3
OBJECT IDENTIFIER    

snBgp4AsPathFilter 1.3.6.1.4.1.1991.1.2.11.4
OBJECT IDENTIFIER    

snBgp4CommunityFilter 1.3.6.1.4.1.1991.1.2.11.5
OBJECT IDENTIFIER    

snBgp4NeighGenCfg 1.3.6.1.4.1.1991.1.2.11.6
OBJECT IDENTIFIER    

snBgp4NeighDistGroup 1.3.6.1.4.1.1991.1.2.11.7
OBJECT IDENTIFIER    

snBgp4NeighFilterGroup 1.3.6.1.4.1.1991.1.2.11.8
OBJECT IDENTIFIER    

snBgp4NeighRouteMap 1.3.6.1.4.1.1991.1.2.11.9
OBJECT IDENTIFIER    

snBgp4Network 1.3.6.1.4.1.1991.1.2.11.10
OBJECT IDENTIFIER    

snBgp4Redis 1.3.6.1.4.1.1991.1.2.11.11
OBJECT IDENTIFIER    

snBgp4RouteMapFilter 1.3.6.1.4.1.1991.1.2.11.12
OBJECT IDENTIFIER    

snBgp4RouteMapMatch 1.3.6.1.4.1.1991.1.2.11.13
OBJECT IDENTIFIER    

snBgp4RouteMapSet 1.3.6.1.4.1.1991.1.2.11.14
OBJECT IDENTIFIER    

snBgp4NeighOperStatus 1.3.6.1.4.1.1991.1.2.11.15
OBJECT IDENTIFIER    

snBgp4RouteOperStatus 1.3.6.1.4.1.1991.1.2.11.16
OBJECT IDENTIFIER    

snBgp4NeighborSummary 1.3.6.1.4.1.1991.1.2.11.17
OBJECT IDENTIFIER    

snBgp4Attribute 1.3.6.1.4.1.1991.1.2.11.18
OBJECT IDENTIFIER    

snBgp4ClearNeighborCmd 1.3.6.1.4.1.1991.1.2.11.19
OBJECT IDENTIFIER    

snBgp4NeighPrefixGroup 1.3.6.1.4.1.1991.1.2.11.20
OBJECT IDENTIFIER    

snBgp4GenAlwaysCompareMed 1.3.6.1.4.1.1991.1.2.11.1.1
To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4GenAutoSummary 1.3.6.1.4.1.1991.1.2.11.1.2
To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4GenDefaultLocalPreference 1.3.6.1.4.1.1991.1.2.11.1.3
To set the default local preference attribute.
OBJECT-TYPE    
  INTEGER  

snBgp4GenDefaultInfoOriginate 1.3.6.1.4.1.1991.1.2.11.1.4
To enable/disable the default Information Originate.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4GenFastExternalFallover 1.3.6.1.4.1.1991.1.2.11.1.5
To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4GenNextBootNeighbors 1.3.6.1.4.1.1991.1.2.11.1.6
The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors.
OBJECT-TYPE    
  INTEGER  

snBgp4GenNextBootRoutes 1.3.6.1.4.1.1991.1.2.11.1.7
The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes.
OBJECT-TYPE    
  INTEGER  

snBgp4GenSynchronization 1.3.6.1.4.1.1991.1.2.11.1.8
To enable/disable the synchronization between BGP and your IGP.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4GenKeepAliveTime 1.3.6.1.4.1.1991.1.2.11.1.9
The Keep alive timer.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4GenHoldTime 1.3.6.1.4.1.1991.1.2.11.1.10
The Hold time timer.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4GenRouterId 1.3.6.1.4.1.1991.1.2.11.1.11
BGP Router Id.
OBJECT-TYPE    
  IpAddress  

snBgp4GenTableMap 1.3.6.1.4.1.1991.1.2.11.1.12
An octet string of the route-map name, each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4GenAdminStat 1.3.6.1.4.1.1991.1.2.11.1.13
The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4GenDefaultMetric 1.3.6.1.4.1.1991.1.2.11.1.14
To set default metric values for the BGP4 protocol.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxNeighbors 1.3.6.1.4.1.1991.1.2.11.1.15
The maximum number of neighbors can be configured in a BGP Peer Group.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMinNeighbors 1.3.6.1.4.1.1991.1.2.11.1.16
The minimum number of neighbors can be configured in a BGP Peer Group.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxRoutes 1.3.6.1.4.1.1991.1.2.11.1.17
The maximum configured number of Routes.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMinRoutes 1.3.6.1.4.1.1991.1.2.11.1.18
The minimum configured number of Routes.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxAddrFilters 1.3.6.1.4.1.1991.1.2.11.1.19
The maximum configured number of BGP4 address filters.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxAggregateAddresses 1.3.6.1.4.1.1991.1.2.11.1.20
The maximum configured number of BGP4 aggregate addresses.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxAsPathFilters 1.3.6.1.4.1.1991.1.2.11.1.21
The maximum configured number of BGP4 AS-PATH filters.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxCommunityFilters 1.3.6.1.4.1.1991.1.2.11.1.22
The maximum configured number of BGP4 Community filters.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxNetworks 1.3.6.1.4.1.1991.1.2.11.1.23
The maximum configured number of BGP4 Networks.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxRouteMapFilters 1.3.6.1.4.1.1991.1.2.11.1.24
The maximum configured number of BGP4 Route-map Filters.
OBJECT-TYPE    
  INTEGER  

snBgp4GenNeighPrefixMinValue 1.3.6.1.4.1.1991.1.2.11.1.25
The minimum configured value of BGP4 Neighbor Prefix.
OBJECT-TYPE    
  INTEGER  

snBgp4GenOperNeighbors 1.3.6.1.4.1.1991.1.2.11.1.26
The current operational max number of neighbors configured for a BGP Group.
OBJECT-TYPE    
  INTEGER  

snBgp4GenOperRoutes 1.3.6.1.4.1.1991.1.2.11.1.27
The current operational number of Routes.
OBJECT-TYPE    
  INTEGER  

snBgp4GenLocalAs 1.3.6.1.4.1.1991.1.2.11.1.28
Bgp4 local autonomous system number.
OBJECT-TYPE    
  INTEGER 1..65535  

snBgp4GenRoutesInstalled 1.3.6.1.4.1.1991.1.2.11.1.29
Bgp4 installed routes.
OBJECT-TYPE    
  INTEGER  

snBgp4GenAsPathInstalled 1.3.6.1.4.1.1991.1.2.11.1.30
Bgp4 installed autonomous system path.
OBJECT-TYPE    
  INTEGER  

snBgp4ExternalDistance 1.3.6.1.4.1.1991.1.2.11.1.31
Administrative distance for BGP external routes.
OBJECT-TYPE    
  INTEGER 1..255  

snBgp4InternalDistance 1.3.6.1.4.1.1991.1.2.11.1.32
Administrative distance for BGP internal routes.
OBJECT-TYPE    
  INTEGER 1..255  

snBgp4LocalDistance 1.3.6.1.4.1.1991.1.2.11.1.33
Administrative distance for BGP local routes.
OBJECT-TYPE    
  INTEGER 1..255  

snBgp4OperNumOfAttributes 1.3.6.1.4.1.1991.1.2.11.1.34
The operational number of attribute entries.
OBJECT-TYPE    
  INTEGER  

snBgp4NextBootMaxAttributes 1.3.6.1.4.1.1991.1.2.11.1.35
The next boot maximum attribute entries. 10000 means reset to default.
OBJECT-TYPE    
  INTEGER 200..30000  

snBgp4ClusterId 1.3.6.1.4.1.1991.1.2.11.1.36
A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default.
OBJECT-TYPE    
  INTEGER  

snBgp4ClientToClientReflection 1.3.6.1.4.1.1991.1.2.11.1.37
To enable/disable the client to client reflection in BGP4.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4GenTotalNeighbors 1.3.6.1.4.1.1991.1.2.11.1.38
The current total number of neighbors running in a BGP Group.
OBJECT-TYPE    
  INTEGER  

snBgp4GenMaxPaths 1.3.6.1.4.1.1991.1.2.11.1.39
The maximum configured number of Paths.
OBJECT-TYPE    
  INTEGER 1..8  

snBgp4GenConfedId 1.3.6.1.4.1.1991.1.2.11.1.40
Bgp4 Confederation Id.
OBJECT-TYPE    
  INTEGER 1..65535  

snBgp4GenConfedPeers 1.3.6.1.4.1.1991.1.2.11.1.41
An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..100)  

snBgp4GenDampening 1.3.6.1.4.1.1991.1.2.11.1.42
The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable.
OBJECT-TYPE    
  INTEGER none(0), parameters(1), routeMap(2)  

snBgp4GenDampenHalfLife 1.3.6.1.4.1.1991.1.2.11.1.43
Bgp4 Dampening Half Life.
OBJECT-TYPE    
  INTEGER 1..45  

snBgp4GenDampenReuse 1.3.6.1.4.1.1991.1.2.11.1.44
Bgp4 Dampening Reuse.
OBJECT-TYPE    
  INTEGER 1..20000  

snBgp4GenDampenSuppress 1.3.6.1.4.1.1991.1.2.11.1.45
Bgp4 Dampening Suppress.
OBJECT-TYPE    
  INTEGER 1..20000  

snBgp4GenDampenMaxSuppress 1.3.6.1.4.1.1991.1.2.11.1.46
Bgp4 Dampening Max Suppress Time.
OBJECT-TYPE    
  INTEGER 1..20000  

snBgp4GenDampenMap 1.3.6.1.4.1.1991.1.2.11.1.47
An octet string of the route-map name for dampening, each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4AddrFilterTable 1.3.6.1.4.1.1991.1.2.11.2.1
Bgp4 Address Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4AddrFilterEntry

snBgp4AddrFilterEntry 1.3.6.1.4.1.1991.1.2.11.2.1.1
An entry in the Bgp4 Address Filter table.
OBJECT-TYPE    
  SnBgp4AddrFilterEntry  

snBgp4AddrFilterIndex 1.3.6.1.4.1.1991.1.2.11.2.1.1.1
The table index for a filter entry.
OBJECT-TYPE    
  INTEGER  

snBgp4AddrFilterAction 1.3.6.1.4.1.1991.1.2.11.2.1.1.2
Action to take if the bgp address match with this filter.
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snBgp4AddrFilterSourceIp 1.3.6.1.4.1.1991.1.2.11.2.1.1.3
Source IP address.
OBJECT-TYPE    
  IpAddress  

snBgp4AddrFilterSourceMask 1.3.6.1.4.1.1991.1.2.11.2.1.1.4
Source IP subnet mask.
OBJECT-TYPE    
  IpAddress  

snBgp4AddrFilterDestIp 1.3.6.1.4.1.1991.1.2.11.2.1.1.5
Destination IP address.
OBJECT-TYPE    
  IpAddress  

snBgp4AddrFilterDestMask 1.3.6.1.4.1.1991.1.2.11.2.1.1.6
Destination IP subnet mask.
OBJECT-TYPE    
  IpAddress  

snBgp4AddrFilterRowStatus 1.3.6.1.4.1.1991.1.2.11.2.1.1.7
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4AggregateAddrTable 1.3.6.1.4.1.1991.1.2.11.3.1
Bgp4 Aggregate Address table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4AggregateAddrEntry

snBgp4AggregateAddrEntry 1.3.6.1.4.1.1991.1.2.11.3.1.1
An entry in the Bgp4 Aggregate Address table.
OBJECT-TYPE    
  SnBgp4AggregateAddrEntry  

snBgp4AggregateAddrIp 1.3.6.1.4.1.1991.1.2.11.3.1.1.1
Aggregate Address IP address.
OBJECT-TYPE    
  IpAddress  

snBgp4AggregateAddrMask 1.3.6.1.4.1.1991.1.2.11.3.1.1.2
Aggregate Address IP subnet mask.
OBJECT-TYPE    
  IpAddress  

snBgp4AggregateAddrOption 1.3.6.1.4.1.1991.1.2.11.3.1.1.3
address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table.
OBJECT-TYPE    
  INTEGER address(1), asSet(2), summaryOnly(3), suppressMap(4), advertiseMap(5), attributeMap(6)  

snBgp4AggregateAddrMap 1.3.6.1.4.1.1991.1.2.11.3.1.1.4
This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4AggregateAddrRowStatus 1.3.6.1.4.1.1991.1.2.11.3.1.1.5
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4AsPathFilterTable 1.3.6.1.4.1.1991.1.2.11.4.1
Bgp4 AS-Path Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4AsPathFilterEntry

snBgp4AsPathFilterEntry 1.3.6.1.4.1.1991.1.2.11.4.1.1
An entry in the Bgp4 As-path Filter table.
OBJECT-TYPE    
  SnBgp4AsPathFilterEntry  

snBgp4AsPathFilterIndex 1.3.6.1.4.1.1991.1.2.11.4.1.1.1
The table index for a filter entry.
OBJECT-TYPE    
  INTEGER  

snBgp4AsPathFilterAction 1.3.6.1.4.1.1991.1.2.11.4.1.1.2
Action to take if the bgp address match with this filter.
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snBgp4AsPathFilterRegExpression 1.3.6.1.4.1.1991.1.2.11.4.1.1.3
Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..256)  

snBgp4AsPathFilterRowStatus 1.3.6.1.4.1.1991.1.2.11.4.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4CommunityFilterTable 1.3.6.1.4.1.1991.1.2.11.5.1
Bgp4 Community Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4CommunityFilterEntry

snBgp4CommunityFilterEntry 1.3.6.1.4.1.1991.1.2.11.5.1.1
An entry in the Bgp4 Community Filter table.
OBJECT-TYPE    
  SnBgp4CommunityFilterEntry  

snBgp4CommunityFilterIndex 1.3.6.1.4.1.1991.1.2.11.5.1.1.1
The table index for a filter entry.
OBJECT-TYPE    
  INTEGER  

snBgp4CommunityFilterAction 1.3.6.1.4.1.1991.1.2.11.5.1.1.2
Action to take if the bgp address match with this filter.
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snBgp4CommunityFilterCommNum 1.3.6.1.4.1.1991.1.2.11.5.1.1.3
A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs.
OBJECT-TYPE    
  STRING Size(0..80)  

snBgp4CommunityFilterInternet 1.3.6.1.4.1.1991.1.2.11.5.1.1.4
Disabled/Enabled the Internet Community.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4CommunityFilterNoAdvertise 1.3.6.1.4.1.1991.1.2.11.5.1.1.5
Do not advertise this route to any peer (internal or external).
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snBgp4CommunityFilterNoExport 1.3.6.1.4.1.1991.1.2.11.5.1.1.6
Do not advertise this route to an EBGP peer.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snBgp4CommunityFilterRowStatus 1.3.6.1.4.1.1991.1.2.11.5.1.1.7
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4CommunityFilterLocalAs 1.3.6.1.4.1.1991.1.2.11.5.1.1.8
Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snBgp4NeighGenCfgTable 1.3.6.1.4.1.1991.1.2.11.6.1
Bgp4 Neighbor General Configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4NeighGenCfgEntry

snBgp4NeighGenCfgEntry 1.3.6.1.4.1.1991.1.2.11.6.1.1
An entry in the Bgp4 Community Filter table.
OBJECT-TYPE    
  SnBgp4NeighGenCfgEntry  

snBgp4NeighGenCfgNeighIp 1.3.6.1.4.1.1991.1.2.11.6.1.1.1
The IP Address for a neighbor entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NeighGenCfgAdvertlevel 1.3.6.1.4.1.1991.1.2.11.6.1.1.2
To set the minimum interval between the sending of BGP routing updates.
OBJECT-TYPE    
  INTEGER 0..600  

snBgp4NeighGenCfgDefOriginate 1.3.6.1.4.1.1991.1.2.11.6.1.1.3
To enable/disable the default originate for this neighbor.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4NeighGenCfgEbgpMultihop 1.3.6.1.4.1.1991.1.2.11.6.1.1.4
To enable/disable the EBGP Muitihop for this neighbor.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4NeighGenCfgMaxPrefix 1.3.6.1.4.1.1991.1.2.11.6.1.1.5
To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes.
OBJECT-TYPE    
  INTEGER  

snBgp4NeighGenCfgNextHopSelf 1.3.6.1.4.1.1991.1.2.11.6.1.1.6
To enable/disable the next-hop processing of BGP updates on the router.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4NeighGenCfgRemoteAs 1.3.6.1.4.1.1991.1.2.11.6.1.1.7
To specify a neighbor with an autonomous system number(AS).
OBJECT-TYPE    
  INTEGER 1..65535  

snBgp4NeighGenCfgSendComm 1.3.6.1.4.1.1991.1.2.11.6.1.1.8
To specify that a COMMUNITES attribute should be sent to a BGP neighbor.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4NeighGenCfgWeight 1.3.6.1.4.1.1991.1.2.11.6.1.1.9
To assign a weight to a neighbor connection.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4NeighGenCfgWeightFilterList 1.3.6.1.4.1.1991.1.2.11.6.1.1.10
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighGenCfgRowStatus 1.3.6.1.4.1.1991.1.2.11.6.1.1.11
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row applyDefault(6)...apply default value to an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5), applyDefault(6)  

snBgp4NeighGenCfgUpdateSrcLpbIntf 1.3.6.1.4.1.1991.1.2.11.6.1.1.12
To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address.
OBJECT-TYPE    
  INTEGER 0..8  

snBgp4NeighGenCfgRouteRefClient 1.3.6.1.4.1.1991.1.2.11.6.1.1.13
To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4NeighGenCfgRemovePrivateAs 1.3.6.1.4.1.1991.1.2.11.6.1.1.14
To enable/disable filtering private AS number.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4NeighGenCfgEbgpMultihopTtl 1.3.6.1.4.1.1991.1.2.11.6.1.1.15
The EBGP Muitihop TTL for this neighbor.
OBJECT-TYPE    
  INTEGER 0..255  

snBgp4NeighGenCfgShutdown 1.3.6.1.4.1.1991.1.2.11.6.1.1.16
To enable/disable BGP4 Nbr Shutdown.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4NeighGenCfgKeepAliveTime 1.3.6.1.4.1.1991.1.2.11.6.1.1.17
The Keep alive timer.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4NeighGenCfgHoldTime 1.3.6.1.4.1.1991.1.2.11.6.1.1.18
The Hold time timer.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4NeighGenCfgDefOrigMap 1.3.6.1.4.1.1991.1.2.11.6.1.1.19
An octet string of the route-map name, each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighGenCfgDesc 1.3.6.1.4.1.1991.1.2.11.6.1.1.20
An octet string of the neighbor description.
OBJECT-TYPE    
  STRING Size(0..80)  

snBgp4NeighGenCfgPass 1.3.6.1.4.1.1991.1.2.11.6.1.1.21
An octet string of the neighbor Md5 password.
OBJECT-TYPE    
  STRING Size(0..80)  

snBgp4NeighDistGroupTable 1.3.6.1.4.1.1991.1.2.11.7.1
Bgp4 Neighbor Distribute Group table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4NeighDistGroupEntry

snBgp4NeighDistGroupEntry 1.3.6.1.4.1.1991.1.2.11.7.1.1
An entry in the Bgp4 Distribute Group table.
OBJECT-TYPE    
  SnBgp4NeighDistGroupEntry  

snBgp4NeighDistGroupNeighIp 1.3.6.1.4.1.1991.1.2.11.7.1.1.1
The IP Address for a neighbor entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NeighDistGroupDir 1.3.6.1.4.1.1991.1.2.11.7.1.1.2
The incoming/outgoing advertisements to which the access list is applied.
OBJECT-TYPE    
  INTEGER out(0), in(1)  

snBgp4NeighDistGroupAccessList 1.3.6.1.4.1.1991.1.2.11.7.1.1.3
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighDistGroupRowStatus 1.3.6.1.4.1.1991.1.2.11.7.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4NeighDistGroupInFilterList 1.3.6.1.4.1.1991.1.2.11.7.1.1.5
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighDistGroupOutFilterList 1.3.6.1.4.1.1991.1.2.11.7.1.1.6
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighDistGroupInIpAccessList 1.3.6.1.4.1.1991.1.2.11.7.1.1.7
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..2)  

snBgp4NeighDistGroupOutIpAccessList 1.3.6.1.4.1.1991.1.2.11.7.1.1.8
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..2)  

snBgp4NeighDistGroupInPrefixList 1.3.6.1.4.1.1991.1.2.11.7.1.1.9
A Prefix name list.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighDistGroupOutPrefixList 1.3.6.1.4.1.1991.1.2.11.7.1.1.10
A Prefix name list.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighFilterGroupTable 1.3.6.1.4.1.1991.1.2.11.8.1
Bgp4 Neighbor Filter Group table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4NeighFilterGroupEntry

snBgp4NeighFilterGroupEntry 1.3.6.1.4.1.1991.1.2.11.8.1.1
An entry in the Bgp4 Neighbor Filter Group table.
OBJECT-TYPE    
  SnBgp4NeighFilterGroupEntry  

snBgp4NeighFilterGroupNeighIp 1.3.6.1.4.1.1991.1.2.11.8.1.1.1
The IP Address for a neighbor entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NeighFilterGroupDir 1.3.6.1.4.1.1991.1.2.11.8.1.1.2
The incoming/outgoing advertisements to which the access list is applied.
OBJECT-TYPE    
  INTEGER out(0), in(1)  

snBgp4NeighFilterGroupAccessList 1.3.6.1.4.1.1991.1.2.11.8.1.1.3
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighFilterGroupRowStatus 1.3.6.1.4.1.1991.1.2.11.8.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4NeighFilterGroupInFilterList 1.3.6.1.4.1.1991.1.2.11.8.1.1.5
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighFilterGroupOutFilterList 1.3.6.1.4.1.1991.1.2.11.8.1.1.6
A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighFilterGroupInAsPathAccessList 1.3.6.1.4.1.1991.1.2.11.8.1.1.7
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..2)  

snBgp4NeighFilterGroupOutAsPathAccessList 1.3.6.1.4.1.1991.1.2.11.8.1.1.8
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..2)  

snBgp4NeighFilterGroupWeight 1.3.6.1.4.1.1991.1.2.11.8.1.1.9
To assign a weight to a neighbor filter.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4NeighFilterGroupWeightAccessList 1.3.6.1.4.1.1991.1.2.11.8.1.1.10
A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING Size(0..2)  

snBgp4NeighRouteMapTable 1.3.6.1.4.1.1991.1.2.11.9.1
Bgp4 Neighbor Route Map table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4NeighRouteMapEntry

snBgp4NeighRouteMapEntry 1.3.6.1.4.1.1991.1.2.11.9.1.1
An entry in the Bgp4 Route Map table.
OBJECT-TYPE    
  SnBgp4NeighRouteMapEntry  

snBgp4NeighRouteMapNeighIp 1.3.6.1.4.1.1991.1.2.11.9.1.1.1
The IP Address for a neighbor entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NeighRouteMapDir 1.3.6.1.4.1.1991.1.2.11.9.1.1.2
The incoming/outgoing advertisements to which the access list is applied.
OBJECT-TYPE    
  INTEGER out(0), in(1)  

snBgp4NeighRouteMapMapName 1.3.6.1.4.1.1991.1.2.11.9.1.1.3
An octet string of the route-map name, Each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighRouteMapRowStatus 1.3.6.1.4.1.1991.1.2.11.9.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4NetworkTable 1.3.6.1.4.1.1991.1.2.11.10.1
Bgp4 Network Weight table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4NetworkEntry

snBgp4NetworkEntry 1.3.6.1.4.1.1991.1.2.11.10.1.1
An entry in the Bgp4 Network Weight table.
OBJECT-TYPE    
  SnBgp4NetworkEntry  

snBgp4NetworkIp 1.3.6.1.4.1.1991.1.2.11.10.1.1.1
The IP Address for a network entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NetworkSubnetMask 1.3.6.1.4.1.1991.1.2.11.10.1.1.2
The subnet mask for a network entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NetworkWeight 1.3.6.1.4.1.1991.1.2.11.10.1.1.3
To assign a weight to a neighbor connection.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4NetworkBackdoor 1.3.6.1.4.1.1991.1.2.11.10.1.1.4
To enable/disable the backdoor for this network.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4NetworkRowStatus 1.3.6.1.4.1.1991.1.2.11.10.1.1.5
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4RedisTable 1.3.6.1.4.1.1991.1.2.11.11.1
The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4RedisEntry

snBgp4RedisEntry 1.3.6.1.4.1.1991.1.2.11.11.1.1
The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain.
OBJECT-TYPE    
  SnBgp4RedisEntry  

snBgp4RedisProtocol 1.3.6.1.4.1.1991.1.2.11.11.1.1.1
The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS.
OBJECT-TYPE    
  INTEGER rip(1), ospf(2), static(3), connected(4), isis(5)  

snBgp4RedisMetric 1.3.6.1.4.1.1991.1.2.11.11.1.1.2
The metric of using the specified protocol Metric value.
OBJECT-TYPE    
  INTEGER  

snBgp4RedisRouteMap 1.3.6.1.4.1.1991.1.2.11.11.1.1.3
An octet string of the route-map name, each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4RedisWeight 1.3.6.1.4.1.1991.1.2.11.11.1.1.4
To assign a weight for the specified protocol.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4RedisMatchInternal 1.3.6.1.4.1.1991.1.2.11.11.1.1.5
This object is only applicable to the OSPF protocol.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4RedisMatchExternal1 1.3.6.1.4.1.1991.1.2.11.11.1.1.6
This object is only applicable to the OSPF protocol.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4RedisMatchExternal2 1.3.6.1.4.1.1991.1.2.11.11.1.1.7
This object is only applicable to the OSPF protocol.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4RedisRowStatus 1.3.6.1.4.1.1991.1.2.11.11.1.1.8
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4RouteMapFilterTable 1.3.6.1.4.1.1991.1.2.11.12.1
Bgp4 RouteMap Filter table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4RouteMapFilterEntry

snBgp4RouteMapFilterEntry 1.3.6.1.4.1.1991.1.2.11.12.1.1
An entry in the Bgp4 RouteMap Filter table.
OBJECT-TYPE    
  SnBgp4RouteMapFilterEntry  

snBgp4RouteMapFilterMapName 1.3.6.1.4.1.1991.1.2.11.12.1.1.1
An octet string of the route-map name, each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4RouteMapFilterSequenceNum 1.3.6.1.4.1.1991.1.2.11.12.1.1.2
A sequence number for this particular route-map.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapFilterAction 1.3.6.1.4.1.1991.1.2.11.12.1.1.3
Action to take if the bgp address match with this filter.
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

snBgp4RouteMapFilterRowStatus 1.3.6.1.4.1.1991.1.2.11.12.1.1.4
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)  

snBgp4RouteMapMatchTable 1.3.6.1.4.1.1991.1.2.11.13.1
Bgp4 Route Map Set table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4RouteMapMatchEntry

snBgp4RouteMapMatchEntry 1.3.6.1.4.1.1991.1.2.11.13.1.1
An entry in the Bgp4 Route Map Match table.
OBJECT-TYPE    
  SnBgp4RouteMapMatchEntry  

snBgp4RouteMapMatchMapName 1.3.6.1.4.1.1991.1.2.11.13.1.1.1
An octet string of the route-map name, each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4RouteMapMatchSequenceNum 1.3.6.1.4.1.1991.1.2.11.13.1.1.2
A sequence number for this particular route-map.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapMatchAsPathFilter 1.3.6.1.4.1.1991.1.2.11.13.1.1.3
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list.
OBJECT-TYPE    
  STRING Size(0..20)  

snBgp4RouteMapMatchCommunityFilter 1.3.6.1.4.1.1991.1.2.11.13.1.1.4
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list.
OBJECT-TYPE    
  STRING Size(0..20)  

snBgp4RouteMapMatchAddressFilter 1.3.6.1.4.1.1991.1.2.11.13.1.1.5
A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
OBJECT-TYPE    
  STRING Size(0..20)  

snBgp4RouteMapMatchMetric 1.3.6.1.4.1.1991.1.2.11.13.1.1.6
To match a metric for BGP routes.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapMatchNextHopList 1.3.6.1.4.1.1991.1.2.11.13.1.1.7
A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4RouteMapMatchRouteType 1.3.6.1.4.1.1991.1.2.11.13.1.1.8
To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET.
OBJECT-TYPE    
  INTEGER none(0), external(1), externalType1(2), externalType2(3), internal(4), local(5)  

snBgp4RouteMapMatchTagList 1.3.6.1.4.1.1991.1.2.11.13.1.1.9
To match a BGP tag access list.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4RouteMapMatchRowMask 1.3.6.1.4.1.1991.1.2.11.13.1.1.10
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapMatchAsPathAccessList 1.3.6.1.4.1.1991.1.2.11.13.1.1.11
A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list.
OBJECT-TYPE    
  STRING Size(0..20)  

snBgp4RouteMapMatchCommunityList 1.3.6.1.4.1.1991.1.2.11.13.1.1.12
A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list.
OBJECT-TYPE    
  STRING Size(0..20)  

snBgp4RouteMapMatchAddressAccessList 1.3.6.1.4.1.1991.1.2.11.13.1.1.13
A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
OBJECT-TYPE    
  STRING Size(0..10)  

snBgp4RouteMapMatchAddressPrefixList 1.3.6.1.4.1.1991.1.2.11.13.1.1.14
Prefix list To match a BGP address access list.
OBJECT-TYPE    
  STRING Size(0..170)  

snBgp4RouteMapMatchNextHopAccessList 1.3.6.1.4.1.1991.1.2.11.13.1.1.15
A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
OBJECT-TYPE    
  STRING Size(0..10)  

snBgp4RouteMapMatchNextHopPrefixList 1.3.6.1.4.1.1991.1.2.11.13.1.1.16
Prefix list To match a BGP address access list.
OBJECT-TYPE    
  STRING Size(0..170)  

snBgp4RouteMapSetTable 1.3.6.1.4.1.1991.1.2.11.14.1
Bgp4 Route Map Set table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4RouteMapSetEntry

snBgp4RouteMapSetEntry 1.3.6.1.4.1.1991.1.2.11.14.1.1
An entry in the Bgp4 Route Map Set table.
OBJECT-TYPE    
  SnBgp4RouteMapSetEntry  

snBgp4RouteMapSetMapName 1.3.6.1.4.1.1991.1.2.11.14.1.1.1
An octet string of the route-map name, each character of the name is represented by one octet.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4RouteMapSetSequenceNum 1.3.6.1.4.1.1991.1.2.11.14.1.1.2
A sequence number for this particular route-map.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapSetAsPathType 1.3.6.1.4.1.1991.1.2.11.14.1.1.3
To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map.
OBJECT-TYPE    
  INTEGER tag(0), prepend(1)  

snBgp4RouteMapSetAsPathString 1.3.6.1.4.1.1991.1.2.11.14.1.1.4
as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1).
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4RouteMapSetAutoTag 1.3.6.1.4.1.1991.1.2.11.14.1.1.5
To enable/disable the automatic-tag for BGP routes.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4RouteMapSetCommunityType 1.3.6.1.4.1.1991.1.2.11.14.1.1.6
To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00
OBJECT-TYPE    
  INTEGER nums(0), none(3)  

snBgp4RouteMapSetCommunityNum 1.3.6.1.4.1.1991.1.2.11.14.1.1.7
community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0).
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapSetCommunityAdditive 1.3.6.1.4.1.1991.1.2.11.14.1.1.8
To add the community to the already existing communities.
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

snBgp4RouteMapSetLocalPreference 1.3.6.1.4.1.1991.1.2.11.14.1.1.9
To modify a local-preference for BGP routes.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapSetMetric 1.3.6.1.4.1.1991.1.2.11.14.1.1.10
To modify a metric for BGP routes.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapSetNextHop 1.3.6.1.4.1.1991.1.2.11.14.1.1.11
To modify the IP address of the next hop for BGP routes.
OBJECT-TYPE    
  IpAddress  

snBgp4RouteMapSetOrigin 1.3.6.1.4.1.1991.1.2.11.14.1.1.12
To set the BGP origin code.
OBJECT-TYPE    
  INTEGER igp(0), egp(1), incomplete(2)  

snBgp4RouteMapSetTag 1.3.6.1.4.1.1991.1.2.11.14.1.1.13
To specify the tag for BGP routes.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapSetWeight 1.3.6.1.4.1.1991.1.2.11.14.1.1.14
To specify the BGP weight for the routing table.
OBJECT-TYPE    
  INTEGER 0..65535  

snBgp4RouteMapSetRowMask 1.3.6.1.4.1.1991.1.2.11.14.1.1.15
This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
OBJECT-TYPE    
  INTEGER  

snBgp4RouteMapSetCommunityNums 1.3.6.1.4.1.1991.1.2.11.14.1.1.16
Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs.
OBJECT-TYPE    
  STRING Size(0..24)  

snBgp4RouteMapSetDampenHalfLife 1.3.6.1.4.1.1991.1.2.11.14.1.1.17
Bgp4 Route Map Dampening Half Life.
OBJECT-TYPE    
  INTEGER 1..45  

snBgp4RouteMapSetDampenReuse 1.3.6.1.4.1.1991.1.2.11.14.1.1.18
Bgp4 Route Map Dampening Reuse.
OBJECT-TYPE    
  INTEGER 1..20000  

snBgp4RouteMapSetDampenSuppress 1.3.6.1.4.1.1991.1.2.11.14.1.1.19
Bgp4 Route Map Dampening Suppress.
OBJECT-TYPE    
  INTEGER 1..20000  

snBgp4RouteMapSetDampenMaxSuppress 1.3.6.1.4.1.1991.1.2.11.14.1.1.20
Bgp4 Route Map Dampening Max Suppress Time.
OBJECT-TYPE    
  INTEGER 1..20000  

snBgp4NeighOperStatusTable 1.3.6.1.4.1.1991.1.2.11.15.1
Bgp4 Neighbor Operational Status table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4NeighOperStatusEntry

snBgp4NeighOperStatusEntry 1.3.6.1.4.1.1991.1.2.11.15.1.1
An entry in the Bgp4 Operational Status table.
OBJECT-TYPE    
  SnBgp4NeighOperStatusEntry  

snBgp4NeighOperStatusIndex 1.3.6.1.4.1.1991.1.2.11.15.1.1.1
The index for a neighbor entry.
OBJECT-TYPE    
  INTEGER  

snBgp4NeighOperStatusIp 1.3.6.1.4.1.1991.1.2.11.15.1.1.2
The IP Address for a neighbor entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NeighOperStatusRemoteAs 1.3.6.1.4.1.1991.1.2.11.15.1.1.3
To show a neighbor with an autonomous system number(AS).
OBJECT-TYPE    
  INTEGER  

snBgp4NeighOperStatusBgpType 1.3.6.1.4.1.1991.1.2.11.15.1.1.4
To show the type of BGP protocol whether is internal or external.
OBJECT-TYPE    
  INTEGER ebgp(0), ibgp(1)  

snBgp4NeighOperStatusState 1.3.6.1.4.1.1991.1.2.11.15.1.1.5
To show the state of this neighbor.
OBJECT-TYPE    
  INTEGER noState(0), idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6)  

snBgp4NeighOperStatusKeepAliveTime 1.3.6.1.4.1.1991.1.2.11.15.1.1.6
The Keep alive timer.
OBJECT-TYPE    
  INTEGER  

snBgp4NeighOperStatusHoldTime 1.3.6.1.4.1.1991.1.2.11.15.1.1.7
The Hold time timer.
OBJECT-TYPE    
  INTEGER  

snBgp4NeighOperStatusAdvertlevel 1.3.6.1.4.1.1991.1.2.11.15.1.1.8
To show the minimum interval between the sending of BGP routing updates.
OBJECT-TYPE    
  INTEGER  

snBgp4NeighOperStatusKeepAliveTxCounts 1.3.6.1.4.1.1991.1.2.11.15.1.1.9
Keep alive message sent counts.
OBJECT-TYPE    
  Counter  

snBgp4NeighOperStatusKeepAliveRxCounts 1.3.6.1.4.1.1991.1.2.11.15.1.1.10
Keep alive message received counts.
OBJECT-TYPE    
  Counter  

snBgp4NeighOperStatusUpdateTxCounts 1.3.6.1.4.1.1991.1.2.11.15.1.1.11
Update message sent counts.
OBJECT-TYPE    
  Counter  

snBgp4NeighOperStatusUpdateRxCounts 1.3.6.1.4.1.1991.1.2.11.15.1.1.12
Update message received counts.
OBJECT-TYPE    
  Counter  

snBgp4NeighOperStatusNotifTxCounts 1.3.6.1.4.1.1991.1.2.11.15.1.1.13
Notification message sent counts.
OBJECT-TYPE    
  Counter  

snBgp4NeighOperStatusNotifRxCounts 1.3.6.1.4.1.1991.1.2.11.15.1.1.14
Notification message received counts.
OBJECT-TYPE    
  Counter  

snBgp4NeighOperStatusOpenTxCounts 1.3.6.1.4.1.1991.1.2.11.15.1.1.15
Open message sent counts.
OBJECT-TYPE    
  Counter  

snBgp4NeighOperStatusOpenRxCounts 1.3.6.1.4.1.1991.1.2.11.15.1.1.16
Open message received counts.
OBJECT-TYPE    
  Counter  

snBgp4RouteOperStatusTable 1.3.6.1.4.1.1991.1.2.11.16.1
Bgp4 Routebor Operational Status table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4RouteOperStatusEntry

snBgp4RouteOperStatusEntry 1.3.6.1.4.1.1991.1.2.11.16.1.1
An entry in the Bgp4 Operational Status table.
OBJECT-TYPE    
  SnBgp4RouteOperStatusEntry  

snBgp4RouteOperStatusIndex 1.3.6.1.4.1.1991.1.2.11.16.1.1.1
The index for a route entry.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteOperStatusIp 1.3.6.1.4.1.1991.1.2.11.16.1.1.2
The IP Address for a route entry.
OBJECT-TYPE    
  IpAddress  

snBgp4RouteOperStatusSubnetMask 1.3.6.1.4.1.1991.1.2.11.16.1.1.3
The IP Subnet Mask for a route entry.
OBJECT-TYPE    
  IpAddress  

snBgp4RouteOperStatusNextHop 1.3.6.1.4.1.1991.1.2.11.16.1.1.4
The next-hop IP for a route entry.
OBJECT-TYPE    
  IpAddress  

snBgp4RouteOperStatusMetric 1.3.6.1.4.1.1991.1.2.11.16.1.1.5
To show the metric value of a route entry.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteOperStatusLocalPreference 1.3.6.1.4.1.1991.1.2.11.16.1.1.6
To show the local preference of a route entry.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteOperStatusWeight 1.3.6.1.4.1.1991.1.2.11.16.1.1.7
To show the weight of this route.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteOperStatusOrigin 1.3.6.1.4.1.1991.1.2.11.16.1.1.8
To show the origin of this route.
OBJECT-TYPE    
  INTEGER igp(0), egp(1), incomplete(2)  

snBgp4RouteOperStatusStatus 1.3.6.1.4.1.1991.1.2.11.16.1.1.9
A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant bit and 0=FALSE, 1=TRUE). bit position meaning ------------ ------- 6-31 reserved. 5 aggregate. 4 best. 3 internal. 2 local. 1 suppressed. 0 valid.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteOperStatusRouteTag 1.3.6.1.4.1.1991.1.2.11.16.1.1.10
To show the route tag of this route.
OBJECT-TYPE    
  INTEGER  

snBgp4RouteOperStatusCommunityList 1.3.6.1.4.1.1991.1.2.11.16.1.1.11
To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
OBJECT-TYPE    
  STRING  

snBgp4RouteOperStatusAsPathList 1.3.6.1.4.1.1991.1.2.11.16.1.1.12
To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING  

snBgp4NeighborSummaryTable 1.3.6.1.4.1.1991.1.2.11.17.1
Bgp4 Routebor Operational Status table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4NeighborSummaryEntry

snBgp4NeighborSummaryEntry 1.3.6.1.4.1.1991.1.2.11.17.1.1
An entry in the Bgp4 Operational Status table.
OBJECT-TYPE    
  SnBgp4NeighborSummaryEntry  

snBgp4NeighborSummaryIndex 1.3.6.1.4.1.1991.1.2.11.17.1.1.1
The index for a route entry.
OBJECT-TYPE    
  INTEGER  

snBgp4NeighborSummaryIp 1.3.6.1.4.1.1991.1.2.11.17.1.1.2
The IP Address for a route entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NeighborSummaryState 1.3.6.1.4.1.1991.1.2.11.17.1.1.3
To show the state of this neighbor.
OBJECT-TYPE    
  INTEGER noState(0), idle(1), connect(2), active(3), openSent(4), openConfirm(5), established(6)  

snBgp4NeighborSummaryStateChgTime 1.3.6.1.4.1.1991.1.2.11.17.1.1.4
The time of a change of the state of this neighbor.
OBJECT-TYPE    
  INTEGER  

snBgp4NeighborSummaryRouteReceived 1.3.6.1.4.1.1991.1.2.11.17.1.1.5
The number of routes received of this neighbor.
OBJECT-TYPE    
  INTEGER  

snBgp4NeighborSummaryRouteInstalled 1.3.6.1.4.1.1991.1.2.11.17.1.1.6
The number of routes installed of this neighbor.
OBJECT-TYPE    
  INTEGER  

snBgp4AttributeTable 1.3.6.1.4.1.1991.1.2.11.18.1
Bgp4 Attribute entries table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4AttributeEntry

snBgp4AttributeEntry 1.3.6.1.4.1.1991.1.2.11.18.1.1
An entry in the Bgp4 Attribute table.
OBJECT-TYPE    
  SnBgp4AttributeEntry  

snBgp4AttributeIndex 1.3.6.1.4.1.1991.1.2.11.18.1.1.1
The index for a route entry.
OBJECT-TYPE    
  INTEGER  

snBgp4AttributeNextHop 1.3.6.1.4.1.1991.1.2.11.18.1.1.2
The next-hop IP for a route entry.
OBJECT-TYPE    
  IpAddress  

snBgp4AttributeMetric 1.3.6.1.4.1.1991.1.2.11.18.1.1.3
To show the metric value of a route entry.
OBJECT-TYPE    
  INTEGER  

snBgp4AttributeOrigin 1.3.6.1.4.1.1991.1.2.11.18.1.1.4
To show the origin of this route.
OBJECT-TYPE    
  INTEGER igp(0), egp(1), incomplete(2)  

snBgp4AttributeAggregatorAs 1.3.6.1.4.1.1991.1.2.11.18.1.1.5
The aggregator AS number for an attribute entry.
OBJECT-TYPE    
  INTEGER  

snBgp4AttributeRouterId 1.3.6.1.4.1.1991.1.2.11.18.1.1.6
The router ID for an attribute entry.
OBJECT-TYPE    
  IpAddress  

snBgp4AttributeAtomicAggregatePresent 1.3.6.1.4.1.1991.1.2.11.18.1.1.7
The atomic aggregate present in an attribute entry.
OBJECT-TYPE    
  INTEGER false(0), true(1)  

snBgp4AttributeLocalPreference 1.3.6.1.4.1.1991.1.2.11.18.1.1.8
To show the local preference of a route entry.
OBJECT-TYPE    
  INTEGER  

snBgp4AttributeCommunityList 1.3.6.1.4.1.1991.1.2.11.18.1.1.9
To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
OBJECT-TYPE    
  STRING  

snBgp4AttributeAsPathList 1.3.6.1.4.1.1991.1.2.11.18.1.1.10
To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
OBJECT-TYPE    
  STRING  

snBgp4AttributeOriginator 1.3.6.1.4.1.1991.1.2.11.18.1.1.11
The originator IP address for an attribute entry.
OBJECT-TYPE    
  IpAddress  

snBgp4AttributeClusterList 1.3.6.1.4.1.1991.1.2.11.18.1.1.12
To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address.
OBJECT-TYPE    
  STRING  

snBgp4ClearNeighborCmdTable 1.3.6.1.4.1.1991.1.2.11.19.1
Clear Bgp4 command table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4ClearNeighborCmdEntry

snBgp4ClearNeighborCmdEntry 1.3.6.1.4.1.1991.1.2.11.19.1.1
An entry in the clear Bgp4 neighbor command table.
OBJECT-TYPE    
  SnBgp4ClearNeighborCmdEntry  

snBgp4ClearNeighborCmdIp 1.3.6.1.4.1.1991.1.2.11.19.1.1.1
The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors.
OBJECT-TYPE    
  IpAddress  

snBgp4ClearNeighborCmdElement 1.3.6.1.4.1.1991.1.2.11.19.1.1.2
To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get.
OBJECT-TYPE    
  INTEGER valid(0), lastPacketWithError(1), notificationErrors(2), softOutbound(3), traffic(4), neighbor(5)  

snBgp4NeighPrefixGroupTable 1.3.6.1.4.1.1991.1.2.11.20.1
Bgp4 Neighbor Prefix Group table.
OBJECT-TYPE    
  SEQUENCE OF  
    SnBgp4NeighPrefixGroupEntry

snBgp4NeighPrefixGroupEntry 1.3.6.1.4.1.1991.1.2.11.20.1.1
An entry in the Bgp4 Prefix Group table.
OBJECT-TYPE    
  SnBgp4NeighPrefixGroupEntry  

snBgp4NeighPrefixGroupNeighIp 1.3.6.1.4.1.1991.1.2.11.20.1.1.1
The IP Address for a neighbor entry.
OBJECT-TYPE    
  IpAddress  

snBgp4NeighPrefixGroupDir 1.3.6.1.4.1.1991.1.2.11.20.1.1.2
The incoming/outgoing advertisements to which the access list is applied.
OBJECT-TYPE    
  INTEGER out(0), in(1)  

snBgp4NeighPrefixGroupInAccessList 1.3.6.1.4.1.1991.1.2.11.20.1.1.3
An in access prefix list name.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighPrefixGroupOutAccessList 1.3.6.1.4.1.1991.1.2.11.20.1.1.4
An out prefix list name.
OBJECT-TYPE    
  STRING Size(0..32)  

snBgp4NeighPrefixGroupRowStatus 1.3.6.1.4.1.1991.1.2.11.20.1.1.5
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OBJECT-TYPE    
  INTEGER invalid(1), valid(2), delete(3), create(4), modify(5)