FORCE10-SYSTEM-COMPONENT-MIB

File: FORCE10-SYSTEM-COMPONENT-MIB.mib (18939 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF RFC1213-MIB
FORCE10-SMI FORCE10-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP DisplayString
f10Mgmt F10CamPartitionType

Defined Types

CamUsageEntry  
SEQUENCE    
  camUsageSlot Integer32
  camUsagePipeNum Integer32
  camUsagePartId F10CamPartitionType
  camUsagePartDesc DisplayString
  camUsageTotal Integer32
  camUsageUsed Integer32

CamUsageL2Entry  
SEQUENCE    
  camUsageL2Slot Integer32
  camUsageL2PipeId Integer32
  camUsageL2IngAclTotal Integer32
  camUsageL2IngAclUsed Integer32
  camUsageL2IngFibTotal Integer32
  camUsageL2IngFibUsed Integer32
  camUsageL2EgrAclTotal Integer32
  camUsageL2EgrAclUsed Integer32

CamUsageL3Entry  
SEQUENCE    
  camUsageL3Slot Integer32
  camUsageL3PipeId Integer32
  camUsageL3IngFibTotal Integer32
  camUsageL3IngFibUsed Integer32
  camUsageL3IngSysFlowTotal Integer32
  camUsageL3IngSysFlowUsed Integer32
  camUsageL3IngTrcListTotal Integer32
  camUsageL3IngTrcListUsed Integer32
  camUsageL3IngMcastFibTotal Integer32
  camUsageL3IngMcastFibUsed Integer32
  camUsageL3IngQosTotal Integer32
  camUsageL3IngQosUsed Integer32
  camUsageL3IngPbrTotal Integer32
  camUsageL3IngPbrUsed Integer32
  camUsageL3IngAclTotal Integer32
  camUsageL3IngAclUsed Integer32
  camUsageL3EgrAclTotal Integer32
  camUsageL3EgrAclUsed Integer32

CamUsageL3ExtEntry  
SEQUENCE    
  camUsageL3ExtSlot Integer32
  camUsageL3ExtPipeId Integer32
  camUsageL3ExtHostTotal Integer32
  camUsageL3ExtHostUsed Integer32
  camUsageL3ExtLPMTotal Integer32
  camUsageL3ExtLPMUsed Integer32

Defined Values

f10SysComponentMib 1.3.6.1.4.1.6027.3.7
Force10 System component MIB. Force10 System component allow user to view the SW information of a component in the system. Currently, the available component information that are avaibale are 1) CAM Entries on linecard - Overall system CAM usage table - L2 Ingress or Egress CAM Usage - L3 Ingress or Egress CAM Usage - L3Ext Table CAM Usage (Specific to S-series L3 tables-Broadcom pltforms)
MODULE-IDENTITY    

f10SysComponentObjects 1.3.6.1.4.1.6027.3.7.1
OBJECT IDENTIFIER    

f10CamEntries 1.3.6.1.4.1.6027.3.7.1.1
OBJECT IDENTIFIER    

f10SysComponentTrap 1.3.6.1.4.1.6027.3.7.1.2
OBJECT IDENTIFIER    

camUsageTable 1.3.6.1.4.1.6027.3.7.1.1.1
A table of general CAM usages table.
OBJECT-TYPE    
  SEQUENCE OF  
    CamUsageEntry

camUsageEntry 1.3.6.1.4.1.6027.3.7.1.1.1.1
A table of CAM usage table. The table show the different partition of CAM
OBJECT-TYPE    
  CamUsageEntry  

camUsageSlot 1.3.6.1.4.1.6027.3.7.1.1.1.1.1
The slot number of linecard where the CAM is located
OBJECT-TYPE    
  Integer32  

camUsagePipeNum 1.3.6.1.4.1.6027.3.7.1.1.1.1.2
The port pipe number on the linecard where the CAM is located
OBJECT-TYPE    
  Integer32  

camUsagePartId 1.3.6.1.4.1.6027.3.7.1.1.1.1.3
The partition id of the CAM on the line card.
OBJECT-TYPE    
  F10CamPartitionType  

camUsagePartDesc 1.3.6.1.4.1.6027.3.7.1.1.1.1.4
The description of the CAM partition id.
OBJECT-TYPE    
  DisplayString  

camUsageTotal 1.3.6.1.4.1.6027.3.7.1.1.1.1.5
The total cam size allocated to this CAM partition
OBJECT-TYPE    
  Integer32  

camUsageUsed 1.3.6.1.4.1.6027.3.7.1.1.1.1.6
The total cam used or configured to this CAM partition
OBJECT-TYPE    
  Integer32  

camUsageL2Table 1.3.6.1.4.1.6027.3.7.1.1.2
A table of Layer 2 or switch layer CAM usages table.
OBJECT-TYPE    
  SEQUENCE OF  
    CamUsageL2Entry

camUsageL2Entry 1.3.6.1.4.1.6027.3.7.1.1.2.1
A table of Layer 2 (switch layer ) CAM usage table. The table show the different partition of CAM and if the cam is used in the Ingress or Egress.
OBJECT-TYPE    
  CamUsageL2Entry  

camUsageL2Slot 1.3.6.1.4.1.6027.3.7.1.1.2.1.1
The slot number of linecard where the CAM is located
OBJECT-TYPE    
  Integer32  

camUsageL2PipeId 1.3.6.1.4.1.6027.3.7.1.1.2.1.2
The port pipe number on the linecard where the CAM is located
OBJECT-TYPE    
  Integer32  

camUsageL2IngAclTotal 1.3.6.1.4.1.6027.3.7.1.1.2.1.3
The total cam size allocated to layer 2 ingress ACL
OBJECT-TYPE    
  Integer32  

camUsageL2IngAclUsed 1.3.6.1.4.1.6027.3.7.1.1.2.1.4
The total cam used or configured in layer 2 ingress ACL
OBJECT-TYPE    
  Integer32  

camUsageL2IngFibTotal 1.3.6.1.4.1.6027.3.7.1.1.2.1.7
The total cam size allocated to layer 2 ingress FIB
OBJECT-TYPE    
  Integer32  

camUsageL2IngFibUsed 1.3.6.1.4.1.6027.3.7.1.1.2.1.8
The total cam used or configured in layer 2 ingress FIB
OBJECT-TYPE    
  Integer32  

camUsageL2EgrAclTotal 1.3.6.1.4.1.6027.3.7.1.1.2.1.9
The total cam size allocated to layer 2 Egress ACL
OBJECT-TYPE    
  Integer32  

camUsageL2EgrAclUsed 1.3.6.1.4.1.6027.3.7.1.1.2.1.10
The total cam used or configured in layer 2 Egress Acl
OBJECT-TYPE    
  Integer32  

camUsageL3Table 1.3.6.1.4.1.6027.3.7.1.1.3
A table of Layer 3 or router layer CAM usages table.
OBJECT-TYPE    
  SEQUENCE OF  
    CamUsageL3Entry

camUsageL3Entry 1.3.6.1.4.1.6027.3.7.1.1.3.1
A table of Layer 3 (router layer ) CAM usage table. The table show the different partition of CAM and if the cam is used in the Ingress or Egress.
OBJECT-TYPE    
  CamUsageL3Entry  

camUsageL3Slot 1.3.6.1.4.1.6027.3.7.1.1.3.1.1
The slot number of linecard where the CAM is located
OBJECT-TYPE    
  Integer32  

camUsageL3PipeId 1.3.6.1.4.1.6027.3.7.1.1.3.1.2
The port pipe number on the linecard where the CAM is located
OBJECT-TYPE    
  Integer32  

camUsageL3IngFibTotal 1.3.6.1.4.1.6027.3.7.1.1.3.1.3
The total cam size allocated to layer 3 ingress FIB
OBJECT-TYPE    
  Integer32  

camUsageL3IngFibUsed 1.3.6.1.4.1.6027.3.7.1.1.3.1.4
The total cam used or configured in layer 3 ingress FIB
OBJECT-TYPE    
  Integer32  

camUsageL3IngSysFlowTotal 1.3.6.1.4.1.6027.3.7.1.1.3.1.5
The total cam size allocated to layer 3 ingress system flow
OBJECT-TYPE    
  Integer32  

camUsageL3IngSysFlowUsed 1.3.6.1.4.1.6027.3.7.1.1.3.1.6
The total cam used or configured in layer 3 ingress system flow
OBJECT-TYPE    
  Integer32  

camUsageL3IngTrcListTotal 1.3.6.1.4.1.6027.3.7.1.1.3.1.7
The total cam size allocated to layer 3 ingress trace list
OBJECT-TYPE    
  Integer32  

camUsageL3IngTrcListUsed 1.3.6.1.4.1.6027.3.7.1.1.3.1.8
The total cam used or configured in layer 3 ingress trace list
OBJECT-TYPE    
  Integer32  

camUsageL3IngMcastFibTotal 1.3.6.1.4.1.6027.3.7.1.1.3.1.9
The total cam size allocated to layer 3 ingress multicast FIB
OBJECT-TYPE    
  Integer32  

camUsageL3IngMcastFibUsed 1.3.6.1.4.1.6027.3.7.1.1.3.1.10
The total cam used or configured in layer 3 ingress multicast FIB
OBJECT-TYPE    
  Integer32  

camUsageL3IngQosTotal 1.3.6.1.4.1.6027.3.7.1.1.3.1.11
The total cam size allocated to layer 3 ingress QOS
OBJECT-TYPE    
  Integer32  

camUsageL3IngQosUsed 1.3.6.1.4.1.6027.3.7.1.1.3.1.12
The total cam used or configured in layer 3 ingress QOS
OBJECT-TYPE    
  Integer32  

camUsageL3IngPbrTotal 1.3.6.1.4.1.6027.3.7.1.1.3.1.13
The total cam size allocated to layer 3 ingress PBR
OBJECT-TYPE    
  Integer32  

camUsageL3IngPbrUsed 1.3.6.1.4.1.6027.3.7.1.1.3.1.14
The total cam used or configured in layer 3 ingress QOS
OBJECT-TYPE    
  Integer32  

camUsageL3IngAclTotal 1.3.6.1.4.1.6027.3.7.1.1.3.1.15
The total cam size allocated to layer 3 ingress ACL
OBJECT-TYPE    
  Integer32  

camUsageL3IngAclUsed 1.3.6.1.4.1.6027.3.7.1.1.3.1.16
The total cam used or configured in layer 3 ingress ACL
OBJECT-TYPE    
  Integer32  

camUsageL3EgrAclTotal 1.3.6.1.4.1.6027.3.7.1.1.3.1.17
The total cam size allocated to layer 3 egress ACL
OBJECT-TYPE    
  Integer32  

camUsageL3EgrAclUsed 1.3.6.1.4.1.6027.3.7.1.1.3.1.18
The total cam used or configured in layer 3 egress ACL
OBJECT-TYPE    
  Integer32  

camUsageL3ExtTable 1.3.6.1.4.1.6027.3.7.1.1.4
A table of Layer 3 or router layer CAM usages table based on BCM pltform.
OBJECT-TYPE    
  SEQUENCE OF  
    CamUsageL3ExtEntry

camUsageL3ExtEntry 1.3.6.1.4.1.6027.3.7.1.1.4.1
A table of Layer 3 (router layer ) CAM usage table. The table show the different partition of CAM/Table based on BCM architecture.
OBJECT-TYPE    
  CamUsageL3ExtEntry  

camUsageL3ExtSlot 1.3.6.1.4.1.6027.3.7.1.1.4.1.1
The slot number of linecard where the CAM is located
OBJECT-TYPE    
  Integer32  

camUsageL3ExtPipeId 1.3.6.1.4.1.6027.3.7.1.1.4.1.2
The port pipe number on the linecard where the CAM is located
OBJECT-TYPE    
  Integer32  

camUsageL3ExtHostTotal 1.3.6.1.4.1.6027.3.7.1.1.4.1.3
The total cam size allocated to layer 3 Host table. Host table is shared by IPv4,IPv6 unicast host route entries (ARP) and IPv4,IPv6 Multicast entries. The usage reflects sum of all these entries
OBJECT-TYPE    
  Integer32  

camUsageL3ExtHostUsed 1.3.6.1.4.1.6027.3.7.1.1.4.1.4
The total cam used in layer 3 Host table. As Host table is shared by IPv4,Ipv6 unicast host route entries and IPv4,IPv6 Multicast entries. The usage reflects sum of all these entries.
OBJECT-TYPE    
  Integer32  

camUsageL3ExtLPMTotal 1.3.6.1.4.1.6027.3.7.1.1.4.1.5
The total cam size allocated to layer 3 Longest Prefix Match table. The LPM table is shared by IPv4,IPv6 unicast route entries.
OBJECT-TYPE    
  Integer32  

camUsageL3ExtLPMUsed 1.3.6.1.4.1.6027.3.7.1.1.4.1.6
The total cam size used in layer 3 Longest Prefix Match table. The LPM table is shared by IPv4,Ipv6 unicast route entries.The usage reflects sum of IPv4 and v6 unicast route entries.
OBJECT-TYPE    
  Integer32  

sysCompAlarmMibNotifications 1.3.6.1.4.1.6027.3.7.1.2.0
OBJECT IDENTIFIER    

sysCompAlarmVariable 1.3.6.1.4.1.6027.3.7.1.2.1
OBJECT IDENTIFIER    

sysCompAlarmLevel 1.3.6.1.4.1.6027.3.7.1.2.1.1
the message warning level
OBJECT-TYPE    
  INTEGER  

sysCompAlarmVarString 1.3.6.1.4.1.6027.3.7.1.2.1.2
An generic string value in the TRAP object
OBJECT-TYPE    
  STRING  

sysCompSlotId 1.3.6.1.4.1.6027.3.7.1.2.1.3
The associated LineCard in the TRAP object
OBJECT-TYPE    
  INTEGER  

sysCompPortPipe 1.3.6.1.4.1.6027.3.7.1.2.1.4
The associated port pipe in the TRAP object
OBJECT-TYPE    
  INTEGER  

sysCompCamPartId 1.3.6.1.4.1.6027.3.7.1.2.1.5
The associated CAM partion name in the TRAP object
OBJECT-TYPE    
  DisplayString  

camUsageThresholdExceed 1.3.6.1.4.1.6027.3.7.1.2.0.1
The agent generate this trap when the cam usage for a partition is exceeded.
NOTIFICATION-TYPE    

camIsFull 1.3.6.1.4.1.6027.3.7.1.2.0.2
The agent generate this trap when the cam is fully used.
NOTIFICATION-TYPE    

camAuditError 1.3.6.1.4.1.6027.3.7.1.2.0.3
The agent generate this trap when a cam entry mismatches with the Software entry.
NOTIFICATION-TYPE