FLARION-USERINFO-MIB

File: FLARION-USERINFO-MIB.mib (15132 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC FLARION-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress TimeTicks Unsigned32
Counter32 DisplayString TruthValue
flarion FloatAsString

Defined Types

SectorAntennaEntry  
SEQUENCE    
  secAntIndex INTEGER
  secAntName DisplayString
  secAntMorphology DisplayString
  secAntManufacturer DisplayString
  secAntSharing DisplayString
  secAntRxDiv TruthValue
  secAntSpatialDiv TruthValue
  secAntPolarDiv TruthValue
  secAntModel DisplayString

SectorAntennaCharEntry  
SEQUENCE    
  secAntCharIndex INTEGER
  secAntCharGain FloatAsString
  secAntCharHorizontalBw FloatAsString
  secAntCharVertcalBw FloatAsString
  secAntCharRadOnCenter INTEGER
  secAntCharAzimuth INTEGER
  secAntCharMechanicalTilt INTEGER
  secAntCharElectricalTilt INTEGER

SectorLnaEntry  
SEQUENCE    
  secLnaIndex INTEGER
  secLnaFilterType DisplayString
  secLnaTowerTop TruthValue

Defined Values

rrUserInfo 1.3.6.1.4.1.8603.4
OBJECT IDENTIFIER    

usrSiteInfo 1.3.6.1.4.1.8603.4.1
OBJECT IDENTIFIER    

usrSectorInfo 1.3.6.1.4.1.8603.4.2
OBJECT IDENTIFIER    

siteIdentity 1.3.6.1.4.1.8603.4.1.1
OBJECT IDENTIFIER    

siteId 1.3.6.1.4.1.8603.4.1.1.1
The name given to the basestation by the wireless carrier. The siteId is controlled by the carrier.
OBJECT-TYPE    
  DisplayString  

siteName 1.3.6.1.4.1.8603.4.1.1.2
The site name as chosen by the carrier. The name may be derived from the siteId or from the siteCity.
OBJECT-TYPE    
  DisplayString  

siteOwner 1.3.6.1.4.1.8603.4.1.1.3
The owner of the basestation.
OBJECT-TYPE    
  DisplayString  

siteInstallDate 1.3.6.1.4.1.8603.4.1.1.4
Date of installation of the basestation.
OBJECT-TYPE    
  DisplayString  

siteCommissionDate 1.3.6.1.4.1.8603.4.1.1.5
Date of completing commissioning of the basestation.
OBJECT-TYPE    
  DisplayString  

siteOtherInfo 1.3.6.1.4.1.8603.4.1.1.6
This field is reserved to store any information that the carrier chooses to use.
OBJECT-TYPE    
  DisplayString  

siteLocation 1.3.6.1.4.1.8603.4.1.2
OBJECT IDENTIFIER    

siteStreet 1.3.6.1.4.1.8603.4.1.2.1
Street address.
OBJECT-TYPE    
  DisplayString  

siteCity 1.3.6.1.4.1.8603.4.1.2.2
City name.
OBJECT-TYPE    
  DisplayString  

siteCounty 1.3.6.1.4.1.8603.4.1.2.3
County (if applicable).
OBJECT-TYPE    
  DisplayString  

siteState 1.3.6.1.4.1.8603.4.1.2.4
State (if applicable).
OBJECT-TYPE    
  DisplayString  

sitePostalLocation 1.3.6.1.4.1.8603.4.1.2.5
Zip code or postal code (if applicable).
OBJECT-TYPE    
  DisplayString  

siteCountry 1.3.6.1.4.1.8603.4.1.2.6
Country.
OBJECT-TYPE    
  DisplayString  

siteLatitude 1.3.6.1.4.1.8603.4.1.2.7
The site angular distance north or south of the earth's equator, measured in degrees along a meridian.
OBJECT-TYPE    
  FloatAsString  

siteLongitude 1.3.6.1.4.1.8603.4.1.2.8
The site angular distance on the earth's surface, measured east or west and expressed in degrees.
OBJECT-TYPE    
  FloatAsString  

siteGroundElevation 1.3.6.1.4.1.8603.4.1.2.9
The ground elevation of the site, in feet.
OBJECT-TYPE    
  FloatAsString  

siteRfEnv 1.3.6.1.4.1.8603.4.1.3
OBJECT IDENTIFIER    

siteStructureType 1.3.6.1.4.1.8603.4.1.3.1
The method by which the antenna is mounted in the field. Possible options include monopole, flagpole, self support, water tank, etc.
OBJECT-TYPE    
  DisplayString  

siteAntennaConfig 1.3.6.1.4.1.8603.4.1.3.2
Used to indicate if the basestation antennae are configured as: Sectorized - radiates RF energy in 1,2, or 3 sectors Omni - radiates RF power in all directions Simulcast Low Power - radiates RF energy to each antenna sector by splitting the carrier's signal output after the signal is amplified, thus requiring a single power amplifier Simulcast High Power - radiates the same information to each antenna sector by splitting the carrier's signal output prior to amplification, thus requiring multiple power amplifiers.
OBJECT-TYPE    
  DisplayString  

siteNumSectors 1.3.6.1.4.1.8603.4.1.3.3
This parameter is used to indicate the number of sectors in the base station. Options are: 0 = omni 1 = one sector 2 = two sectors 3 = three sectors
OBJECT-TYPE    
  INTEGER 0..3  

siteConnectivity 1.3.6.1.4.1.8603.4.1.4
OBJECT IDENTIFIER    

siteCluster 1.3.6.1.4.1.8603.4.1.4.1
For EMS management purposes, the network may be divided into clusters. This field identifies the cluster associated with the basestation.
OBJECT-TYPE    
  DisplayString  

siteDomain 1.3.6.1.4.1.8603.4.1.4.2
The site domain is used with the siteId to form the hostname of the basestation.
OBJECT-TYPE    
  DisplayString  

sectorAntennaTable 1.3.6.1.4.1.8603.4.2.1
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    SectorAntennaEntry

sectorAntennaEntry 1.3.6.1.4.1.8603.4.2.1.1
Tok_String
OBJECT-TYPE    
  SectorAntennaEntry  

secAntIndex 1.3.6.1.4.1.8603.4.2.1.1.1
Sector index.
OBJECT-TYPE    
  INTEGER  

secAntName 1.3.6.1.4.1.8603.4.2.1.1.2
Sector name. For example, alpha, beta, gamme, omni.
OBJECT-TYPE    
  DisplayString  

secAntMorphology 1.3.6.1.4.1.8603.4.2.1.1.3
An indication of the RF classification for the coverage area of the sector. Possible values include Rural, Dense Rural, Light Suburban, Suburban, Dense Suburban, Light Urban, Urban, and Dense Urban.
OBJECT-TYPE    
  DisplayString  

secAntManufacturer 1.3.6.1.4.1.8603.4.2.1.1.4
Name of the manufacturer of the antenna used in this sector.
OBJECT-TYPE    
  DisplayString  

secAntSharing 1.3.6.1.4.1.8603.4.2.1.1.5
Used to indicate and explain if the antenna is shared with other basestations or other technologies.
OBJECT-TYPE    
  DisplayString  

secAntRxDiv 1.3.6.1.4.1.8603.4.2.1.1.6
Indicates if two antennae are used in order to obtain diversity.
OBJECT-TYPE    
  TruthValue  

secAntSpatialDiv 1.3.6.1.4.1.8603.4.2.1.1.7
Indicates if antenna spatial diversity (two antennas physically separated) is used.
OBJECT-TYPE    
  TruthValue  

secAntPolarDiv 1.3.6.1.4.1.8603.4.2.1.1.8
Indicates if antenna polarization diversity is used.
OBJECT-TYPE    
  TruthValue  

secAntModel 1.3.6.1.4.1.8603.4.2.1.1.9
The model number of the antenna.
OBJECT-TYPE    
  DisplayString  

sectorAntennaCharTable 1.3.6.1.4.1.8603.4.2.2
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    SectorAntennaCharEntry

sectorAntennaCharEntry 1.3.6.1.4.1.8603.4.2.2.1
Tok_String
OBJECT-TYPE    
  SectorAntennaCharEntry  

secAntCharIndex 1.3.6.1.4.1.8603.4.2.2.1.1
Sector index.
OBJECT-TYPE    
  INTEGER  

secAntCharGain 1.3.6.1.4.1.8603.4.2.2.1.2
The antenna gain in dBd (a measure of how well the antenna will send or pick up a radio signal compared to a dipole antenna). Valid values are 0 to 100.
OBJECT-TYPE    
  FloatAsString  

secAntCharHorizontalBw 1.3.6.1.4.1.8603.4.2.2.1.3
An indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the horizontal plane. This value is used along with sectorAntennaVerticalBw in propagation tools to mask the path-loss and model coverage area. Valid values are 0 to 360.
OBJECT-TYPE    
  FloatAsString  

secAntCharVertcalBw 1.3.6.1.4.1.8603.4.2.2.1.4
An indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the vertical plane. This value is used along with sectorAntennaHorizontalBw in propagation tools to mask the path-loss and model coverage area. Valid values are 0 to 180.
OBJECT-TYPE    
  FloatAsString  

secAntCharRadOnCenter 1.3.6.1.4.1.8603.4.2.2.1.5
This is a measurement of the antenna center line mounting height, in feet Above Ground Level (AGL).
OBJECT-TYPE    
  INTEGER 1..1000  

secAntCharAzimuth 1.3.6.1.4.1.8603.4.2.2.1.6
This is a measure of the antenna main-beam orientation with respect to true north in the horizontal plane.
OBJECT-TYPE    
  INTEGER 0..359  

secAntCharMechanicalTilt 1.3.6.1.4.1.8603.4.2.2.1.7
This is a measure of the physical mounting of the antenna with respect to plumb (vertical). This value indicates values relative to plumb which is assumed to be 0 degrees. Negative values would indicate up-tilt, which is occasionally done to adjust for excessive electrical tilt.
OBJECT-TYPE    
  INTEGER -20..90  

secAntCharElectricalTilt 1.3.6.1.4.1.8603.4.2.2.1.8
A measure of the down-tilt designed into the antenna pattern. This is typically measured relative to a point at 90 degrees to a plumb back plane in the main beam of the antenna. These values may be fixed of variable for a given antenna model.
OBJECT-TYPE    
  INTEGER -20..90  

sectorLnaTable 1.3.6.1.4.1.8603.4.2.3
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    SectorLnaEntry

sectorLnaEntry 1.3.6.1.4.1.8603.4.2.3.1
Tok_String
OBJECT-TYPE    
  SectorLnaEntry  

secLnaIndex 1.3.6.1.4.1.8603.4.2.3.1.1
Sector index.
OBJECT-TYPE    
  INTEGER  

secLnaFilterType 1.3.6.1.4.1.8603.4.2.3.1.2
This parameter indicated the type of filter used in the LNA/Duplexer unit. It can be simplex (receive only, or duplex for transmit and receive).
OBJECT-TYPE    
  DisplayString  

secLnaTowerTop 1.3.6.1.4.1.8603.4.2.3.1.3
Indicates if the LNA is a tower-top mounted type.
OBJECT-TYPE    
  TruthValue