F3-POPM-MIB

File: F3-POPM-MIB.mib (32439 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CM-ENTITY-MIB CM-FACILITY-MIB CM-PERFORMANCE-MIB
ADVA-MIB CM-COMMON-MIB

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE Integer32 Unsigned32
Counter64 DateAndTime TruthValue
VariablePointer TEXTUAL-CONVENTION neIndex
shelfIndex slotIndex cmEthernetAccPortEntry
cmEthernetNetPortEntry cmEthernetAccPortStatsEntry cmEthernetNetPortStatsEntry
cmEthernetAccPortHistoryEntry cmEthernetNetPortHistoryEntry fsp150cm
PerfCounter64

Defined Types

POPMGlitchRejectionLevel  
Provides ability to manage the glitch rejection level, none -- no glitch rejection low -- single glitch rejection medium -- three glitch rejection high -- five glitch rejection .
TEXTUAL-CONVENTION    
  INTEGER none(1), low(2), medium(3), high(4)  

POPMState  
Provides the enumerations for POPM State not-applicable --not applicable state inoperable --enabled, port is unassigned not-available --not available state calibrating --enabled, operational, computing monitoring --enabled, operational, monitoring paused --enabled, signal out-of-range, signal out-of-variance inhibited-R --enabled, LOS (revertive) inhibited-NR --enabled, sampling error (non-revertive) .
TEXTUAL-CONVENTION    
  INTEGER not-applicable(1), inoperable(2), not-available(3), calibrating(4), monitoring(5), paused(6), inhibited-R(7), inhibited-NR(8)  

POPMClearAlarmsAction  
Provides ability to clear the alarms on POPR function.
TEXTUAL-CONVENTION    
  INTEGER not-applicable(0), clear(1)  

F3EthernetAccPortPOPMonitorEntry  
SEQUENCE    
  f3EthernetAccPortPOPMonitorEnabled TruthValue
  f3EthernetAccPortPOPMonitorOperRangeHi Integer32
  f3EthernetAccPortPOPMonitorOperRangeLow Integer32
  f3EthernetAccPortPOPMonitorVariance Integer32
  f3EthernetAccPortPOPMonitorWindowSize Integer32
  f3EthernetAccPortPOPMonitorGlitchRejectionLevel POPMGlitchRejectionLevel
  f3EthernetAccPortPOPMonitorState POPMState
  f3EthernetAccPortPOPMonitorClearAction POPMClearAlarmsAction

F3EthernetNetPortPOPMonitorEntry  
SEQUENCE    
  f3EthernetNetPortPOPMonitorEnabled TruthValue
  f3EthernetNetPortPOPMonitorOperRangeHi Integer32
  f3EthernetNetPortPOPMonitorOperRangeLow Integer32
  f3EthernetNetPortPOPMonitorVariance Integer32
  f3EthernetNetPortPOPMonitorWindowSize Integer32
  f3EthernetNetPortPOPMonitorGlitchRejectionLevel POPMGlitchRejectionLevel
  f3EthernetNetPortPOPMonitorState POPMState
  f3EthernetNetPortPOPMonitorClearAction POPMClearAlarmsAction

F3EthernetAccPortPOPMStatsEntry  
SEQUENCE    
  f3EthernetAccPortPOPMStatsOPR Integer32
  f3EthernetAccPortPOPMStatsAOPR Integer32
  f3EthernetAccPortPOPMStatsOPRVar Integer32
  f3EthernetAccPortPOPMStatsOPRMaxVar Integer32
  f3EthernetAccPortPOPMStatsOPRGlitchRejects Unsigned32
  f3EthernetAccPortPOPMStatsOPRRTR Unsigned32
  f3EthernetAccPortPOPMStatsOPROOR Unsigned32
  f3EthernetAccPortPOPMStatsOPROOV Unsigned32

F3EthernetAccPortPOPMHistoryEntry  
SEQUENCE    
  f3EthernetAccPortPOPMHistoryOPR Integer32
  f3EthernetAccPortPOPMHistoryAOPR Integer32
  f3EthernetAccPortPOPMHistoryOPRVar Integer32
  f3EthernetAccPortPOPMHistoryOPRMaxVar Integer32
  f3EthernetAccPortPOPMHistoryOPRGlitchRejects Unsigned32
  f3EthernetAccPortPOPMHistoryOPRRTR Unsigned32
  f3EthernetAccPortPOPMHistoryOPROOR Unsigned32
  f3EthernetAccPortPOPMHistoryOPROOV Unsigned32

F3EthernetNetPortPOPMStatsEntry  
SEQUENCE    
  f3EthernetNetPortPOPMStatsOPR Integer32
  f3EthernetNetPortPOPMStatsAOPR Integer32
  f3EthernetNetPortPOPMStatsOPRVar Integer32
  f3EthernetNetPortPOPMStatsOPRMaxVar Integer32
  f3EthernetNetPortPOPMStatsOPRGlitchRejects Unsigned32
  f3EthernetNetPortPOPMStatsOPRRTR Unsigned32
  f3EthernetNetPortPOPMStatsOPROOR Unsigned32
  f3EthernetNetPortPOPMStatsOPROOV Unsigned32

F3EthernetNetPortPOPMHistoryEntry  
SEQUENCE    
  f3EthernetNetPortPOPMHistoryOPR Integer32
  f3EthernetNetPortPOPMHistoryAOPR Integer32
  f3EthernetNetPortPOPMHistoryOPRVar Integer32
  f3EthernetNetPortPOPMHistoryOPRMaxVar Integer32
  f3EthernetNetPortPOPMHistoryOPRGlitchRejects Unsigned32
  f3EthernetNetPortPOPMHistoryOPRRTR Unsigned32
  f3EthernetNetPortPOPMHistoryOPROOR Unsigned32
  f3EthernetNetPortPOPMHistoryOPROOV Unsigned32

Defined Values

f3POPMMib 1.3.6.1.4.1.2544.1.12.16
This module documents the Precision Optical Power Monitoring features provided by the F3 product line of products. Copyright (C) ADVA Optical Networking.
MODULE-IDENTITY    

f3POPMObjects 1.3.6.1.4.1.2544.1.12.16.1
OBJECT IDENTIFIER    

f3POPMPerfObjects 1.3.6.1.4.1.2544.1.12.16.2
OBJECT IDENTIFIER    

f3POPMConformance 1.3.6.1.4.1.2544.1.12.16.3
OBJECT IDENTIFIER    

f3EthernetAccPortPOPMonitorTable 1.3.6.1.4.1.2544.1.12.16.1.2
This table provides ability to manage the Precision Optical Power feature on Ethernet Access Ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3EthernetAccPortPOPMonitorEntry

f3EthernetAccPortPOPMonitorEntry 1.3.6.1.4.1.2544.1.12.16.1.2.1
A conceptual row in the f3EthernetAccPortPOPMonitorTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3EthernetAccPortPOPMonitorEntry  

f3EthernetAccPortPOPMonitorEnabled 1.3.6.1.4.1.2544.1.12.16.1.2.1.1
This object enables/disables Precision Optical Power monitoring on the Ethernet Access Port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

f3EthernetAccPortPOPMonitorOperRangeHi 1.3.6.1.4.1.2544.1.12.16.1.2.1.2
This object provides the higher operating range, in 10ths of dbm, for Precision Optical Power monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMonitorOperRangeLow 1.3.6.1.4.1.2544.1.12.16.1.2.1.3
This object provides the lower operating range, in 10ths of dbm, for Precision Optical Power monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMonitorVariance 1.3.6.1.4.1.2544.1.12.16.1.2.1.4
This object provides the maximum absolute variance, from average, in 10ths of dbm, for Precision Optical Power monitoring.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMonitorWindowSize 1.3.6.1.4.1.2544.1.12.16.1.2.1.5
This object provides the window size (time in seconds), for Precision Optical Power monitoring.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3600  

f3EthernetAccPortPOPMonitorGlitchRejectionLevel 1.3.6.1.4.1.2544.1.12.16.1.2.1.6
This object provides the maximum number of sequential variance violations constituting a glitch.
Status: current Access: read-write
OBJECT-TYPE    
  POPMGlitchRejectionLevel  

f3EthernetAccPortPOPMonitorState 1.3.6.1.4.1.2544.1.12.16.1.2.1.7
This object provides the current state of the Precision Optical Monitoring processing.
Status: current Access: read-only
OBJECT-TYPE    
  POPMState  

f3EthernetAccPortPOPMonitorClearAction 1.3.6.1.4.1.2544.1.12.16.1.2.1.8
This object provides the ability to clear outstanding Precision Optical Monitoring alarms.
Status: current Access: read-write
OBJECT-TYPE    
  POPMClearAlarmsAction  

f3EthernetNetPortPOPMonitorTable 1.3.6.1.4.1.2544.1.12.16.1.1
This table provides ability to manage the Precision Optical Power feature on Ethernet Network Ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3EthernetNetPortPOPMonitorEntry

f3EthernetNetPortPOPMonitorEntry 1.3.6.1.4.1.2544.1.12.16.1.1.1
A conceptual row in the f3EthernetNetPortPOPMonitorTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3EthernetNetPortPOPMonitorEntry  

f3EthernetNetPortPOPMonitorEnabled 1.3.6.1.4.1.2544.1.12.16.1.1.1.1
This object enables/disables Precision Optical Power monitoring on the Ethernet Network Port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

f3EthernetNetPortPOPMonitorOperRangeHi 1.3.6.1.4.1.2544.1.12.16.1.1.1.2
This object provides the higher operating range, in 10ths of dbm, for Precision Optical Power monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMonitorOperRangeLow 1.3.6.1.4.1.2544.1.12.16.1.1.1.3
This object provides the lower operating range, in 10ths of dbm, for Precision Optical Power monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMonitorVariance 1.3.6.1.4.1.2544.1.12.16.1.1.1.4
This object provides the maximum absolute variance, from average, in 10ths of dbm, for Precision Optical Power monitoring.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMonitorWindowSize 1.3.6.1.4.1.2544.1.12.16.1.1.1.5
This object provides the window size (time in seconds), for Precision Optical Power monitoring.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..3600  

f3EthernetNetPortPOPMonitorGlitchRejectionLevel 1.3.6.1.4.1.2544.1.12.16.1.1.1.6
This object provides the maximum number of sequential variance violations constituting a glitch.
Status: current Access: read-write
OBJECT-TYPE    
  POPMGlitchRejectionLevel  

f3EthernetNetPortPOPMonitorState 1.3.6.1.4.1.2544.1.12.16.1.1.1.7
This object provides the current state of the Precision Optical Monitoring processing.
Status: current Access: read-only
OBJECT-TYPE    
  POPMState  

f3EthernetNetPortPOPMonitorClearAction 1.3.6.1.4.1.2544.1.12.16.1.1.1.8
This object provides the ability to clear outstanding Precision Optical Monitoring alarms.
Status: current Access: read-write
OBJECT-TYPE    
  POPMClearAlarmsAction  

f3EthernetAccPortPOPMStatsTable 1.3.6.1.4.1.2544.1.12.16.2.1
A collection of Ethernet Access Port Precision Optical Power related statistics. These reflect the current data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3EthernetAccPortPOPMStatsEntry

f3EthernetAccPortPOPMStatsEntry 1.3.6.1.4.1.2544.1.12.16.2.1.1
A conceptual row in the f3EthernetAccPortPOPMStatsTable. Entries exist in this table for each Ethernet interface/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3EthernetAccPortPOPMStatsEntry  

f3EthernetAccPortPOPMStatsOPR 1.3.6.1.4.1.2544.1.12.16.2.1.1.1
Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMStatsAOPR 1.3.6.1.4.1.2544.1.12.16.2.1.1.2
Average Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMStatsOPRVar 1.3.6.1.4.1.2544.1.12.16.2.1.1.3
Signed variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMStatsOPRMaxVar 1.3.6.1.4.1.2544.1.12.16.2.1.1.4
Signed maximum variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMStatsOPRGlitchRejects 1.3.6.1.4.1.2544.1.12.16.2.1.1.5
Number of glitch rejections. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetAccPortPOPMStatsOPRRTR 1.3.6.1.4.1.2544.1.12.16.2.1.1.6
Number of times the POPM state machine reverts to the running state from the inhibited R state. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetAccPortPOPMStatsOPROOR 1.3.6.1.4.1.2544.1.12.16.2.1.1.7
Number of times the Precision Optical Power is out of range. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetAccPortPOPMStatsOPROOV 1.3.6.1.4.1.2544.1.12.16.2.1.1.8
Number of times the Precision Optical Power out of variance occurrences. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetAccPortPOPMHistoryTable 1.3.6.1.4.1.2544.1.12.16.2.2
A collection of Ethernet Access Port Precision Optical Power related statistics. These reflect the current data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3EthernetAccPortPOPMHistoryEntry

f3EthernetAccPortPOPMHistoryEntry 1.3.6.1.4.1.2544.1.12.16.2.2.1
A conceptual row in the f3EthernetAccPortPOPMHistoryTable. Entries exist in this table for each Ethernet interface/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3EthernetAccPortPOPMHistoryEntry  

f3EthernetAccPortPOPMHistoryOPR 1.3.6.1.4.1.2544.1.12.16.2.2.1.1
Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMHistoryAOPR 1.3.6.1.4.1.2544.1.12.16.2.2.1.2
Average Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMHistoryOPRVar 1.3.6.1.4.1.2544.1.12.16.2.2.1.3
Signed variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMHistoryOPRMaxVar 1.3.6.1.4.1.2544.1.12.16.2.2.1.4
Signed maximum variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetAccPortPOPMHistoryOPRGlitchRejects 1.3.6.1.4.1.2544.1.12.16.2.2.1.5
Number of glitch rejections. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetAccPortPOPMHistoryOPRRTR 1.3.6.1.4.1.2544.1.12.16.2.2.1.6
Number of times the POPM state machine reverts to the running state from the inhibited R state. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetAccPortPOPMHistoryOPROOR 1.3.6.1.4.1.2544.1.12.16.2.2.1.7
Number of times the Precision Optical Power is out of range. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetAccPortPOPMHistoryOPROOV 1.3.6.1.4.1.2544.1.12.16.2.2.1.8
Number of times the Precision Optical Power out of variance occurrences. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetNetPortPOPMStatsTable 1.3.6.1.4.1.2544.1.12.16.2.3
A collection of Ethernet Network Port Precision Optical Power related statistics. These reflect the current data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3EthernetNetPortPOPMStatsEntry

f3EthernetNetPortPOPMStatsEntry 1.3.6.1.4.1.2544.1.12.16.2.3.1
A conceptual row in the f3EthernetNetPortPOPMStatsTable. Entries exist in this table for each Ethernet interface/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3EthernetNetPortPOPMStatsEntry  

f3EthernetNetPortPOPMStatsOPR 1.3.6.1.4.1.2544.1.12.16.2.3.1.1
Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMStatsAOPR 1.3.6.1.4.1.2544.1.12.16.2.3.1.2
Average Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMStatsOPRVar 1.3.6.1.4.1.2544.1.12.16.2.3.1.3
Signed variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMStatsOPRMaxVar 1.3.6.1.4.1.2544.1.12.16.2.3.1.4
Signed maximum variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMStatsOPRGlitchRejects 1.3.6.1.4.1.2544.1.12.16.2.3.1.5
Number of glitch rejections. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetNetPortPOPMStatsOPRRTR 1.3.6.1.4.1.2544.1.12.16.2.3.1.6
Number of times the POPM state machine reverts to the running state from the inhibited R state. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetNetPortPOPMStatsOPROOR 1.3.6.1.4.1.2544.1.12.16.2.3.1.7
Number of times the Precision Optical Power is out of range. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetNetPortPOPMStatsOPROOV 1.3.6.1.4.1.2544.1.12.16.2.3.1.8
Number of times the Precision Optical Power out of variance occurrences. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetNetPortPOPMHistoryTable 1.3.6.1.4.1.2544.1.12.16.2.4
A collection of Ethernet Network Port Precision Optical Power related statistics. These reflect the current data.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    F3EthernetNetPortPOPMHistoryEntry

f3EthernetNetPortPOPMHistoryEntry 1.3.6.1.4.1.2544.1.12.16.2.4.1
A conceptual row in the f3EthernetNetPortPOPMHistoryTable. Entries exist in this table for each Ethernet interface/port.
Status: current Access: not-accessible
OBJECT-TYPE    
  F3EthernetNetPortPOPMHistoryEntry  

f3EthernetNetPortPOPMHistoryOPR 1.3.6.1.4.1.2544.1.12.16.2.4.1.1
Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMHistoryAOPR 1.3.6.1.4.1.2544.1.12.16.2.4.1.2
Average Precision Optical Power Receive (in dBm) for the physical layer. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMHistoryOPRVar 1.3.6.1.4.1.2544.1.12.16.2.4.1.3
Signed variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMHistoryOPRMaxVar 1.3.6.1.4.1.2544.1.12.16.2.4.1.4
Signed maximum variance of Optical Power Receive, from average. This is applicable only if Precision Optical Power monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

f3EthernetNetPortPOPMHistoryOPRGlitchRejects 1.3.6.1.4.1.2544.1.12.16.2.4.1.5
Number of glitch rejections. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetNetPortPOPMHistoryOPRRTR 1.3.6.1.4.1.2544.1.12.16.2.4.1.6
Number of times the POPM state machine reverts to the running state from the inhibited R state. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetNetPortPOPMHistoryOPROOR 1.3.6.1.4.1.2544.1.12.16.2.4.1.7
Number of times the Precision Optical Power is out of range. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3EthernetNetPortPOPMHistoryOPROOV 1.3.6.1.4.1.2544.1.12.16.2.4.1.8
Number of times the Precision Optical Power out of variance occurrences. This is applicable only if Precision Optical Layer monitoring is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

f3POPMCompliances 1.3.6.1.4.1.2544.1.12.16.3.1
OBJECT IDENTIFIER    

f3POPMGroups 1.3.6.1.4.1.2544.1.12.16.3.2
OBJECT IDENTIFIER    

f3POPMCompliance 1.3.6.1.4.1.2544.1.12.16.3.1.1
Describes the requirements for conformance to the POPM Object group.
Status: current Access: read-only
MODULE-COMPLIANCE    

f3POPMFacilityGroup 1.3.6.1.4.1.2544.1.12.16.3.2.1
A collection of objects used to manage the F3 POPM Functionality .
Status: current Access: read-only
OBJECT-GROUP    

f3POPMStatsGroup 1.3.6.1.4.1.2544.1.12.16.3.2.2
A collection of objects used to manage the F3 POPM Functionality .
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor