F10-CHASSIS-MIB
File:
F10-CHASSIS-MIB.mib (90686 bytes)
Imported modules
Imported symbols
Defined Types
ChSysPowerSupplyEntry |
|
SEQUENCE |
|
|
|
|
chSysPowerSupplyIndex |
Integer32 |
|
|
chSysPowerSupplyOperStatus |
INTEGER |
|
|
chSysPowerSupplyType |
INTEGER |
|
ChSysFanTrayEntry |
|
SEQUENCE |
|
|
|
|
chSysFanTrayIndex |
Integer32 |
|
|
chSysFanTrayOperStatus |
INTEGER |
|
ChSysCardEntry |
|
SEQUENCE |
|
|
|
|
chSysCardSlotIndex |
Integer32 |
|
|
chSysCardType |
F10SystemCardType |
|
|
chSysCardNumber |
Integer32 |
|
|
chSysCardSerialNumber |
DisplayString |
|
|
chSysCardVendorId |
DisplayString |
|
|
chSysCardMfgDate |
F10MfgDate |
|
|
chSysCardEcLevel |
Integer32 |
|
|
chSysCardUpperTemp |
Gauge32 |
|
|
chSysCardLowerTemp |
Gauge32 |
|
|
chSysCardNumProcessors |
Integer32 |
|
|
chSysCardNumPhyPorts |
Integer32 |
|
|
chSysCardNumLgcPorts |
Integer32 |
|
|
chSysCardUpTime |
TimeTicks |
|
|
chSysCardAdminStatus |
INTEGER |
|
|
chSysCardOperStatus |
F10CardOperStatus |
|
|
chSysCardFaultStatus |
INTEGER |
|
|
chSysCardLogStream |
OCTET STRING |
|
|
chSysCardCountryCode |
OCTET STRING |
|
|
chSysCardPartNum |
DisplayString |
|
|
chSysCardProductRev |
DisplayString |
|
|
chSysCardProdOrder |
DisplayString |
|
|
chSysCardParityPhantomError |
Gauge32 |
|
|
chSysCardParityRecoverableError |
Gauge32 |
|
|
chSysCardParityNonrecovrableError |
Gauge32 |
|
ChSysPortEntry |
|
SEQUENCE |
|
|
|
|
chSysPortSlotIndex |
Integer32 |
|
|
chSysPortIndex |
Integer32 |
|
|
chSysPortType |
F10SystemPortType |
|
|
chSysPortAdminStatus |
INTEGER |
|
|
chSysPortOperStatus |
INTEGER |
|
|
chSysPortIfIndex |
Integer32 |
|
|
chSysXfpRecvPower |
F10HundredthdB |
|
ChSysProcessorEntry |
|
SEQUENCE |
|
|
|
|
chSysProcessorSlotIndex |
Integer32 |
|
|
chSysProcessorIndex |
Integer32 |
|
|
chSysProcessorModule |
F10ProcessorModuleType |
|
|
chSysProcessorUpTime |
TimeTicks |
|
|
chSysProcessorNvramSize |
Integer32 |
|
|
chSysProcessorMemSize |
Integer32 |
|
|
chSysProcessorLogStream |
OCTET STRING |
|
ChSysSwModuleEntry |
|
SEQUENCE |
|
|
|
|
chSysSwSlotIndex |
Integer32 |
|
|
chSysSwProcessorIndex |
Integer32 |
|
|
chSysSwRuntimeImgVersion |
DisplayString |
|
|
chSysSwRuntimeImgDate |
F10SwDate |
|
|
chSysSwCurrentBootImgVersion |
DisplayString |
|
|
chSysSwCurrentBootImgDate |
DateAndTime |
|
|
chSysSwCurrentBootImgStatus |
INTEGER |
|
|
chSysSwBackupBootImgVersion |
DisplayString |
|
|
chSysSwBackupBootImgDate |
DateAndTime |
|
|
chSysSwBackupBootImgStatus |
INTEGER |
|
|
chSysSwNextRebootImage |
INTEGER |
|
|
chSysSwCurrentBootImage |
INTEGER |
|
ChSysSfmEntry |
|
SEQUENCE |
|
|
|
|
chSysSfmIndex |
Integer32 |
|
|
chSysSfmSerialNumber |
DisplayString |
|
|
chSysSfmVendorId |
DisplayString |
|
|
chSysSfmMfgDate |
F10MfgDate |
|
|
chSysSfmEcLevel |
Integer32 |
|
|
chSysSfmAdminStatus |
INTEGER |
|
|
chSysSfmOperStatus |
INTEGER |
|
|
chSysSfmErrorStatus |
INTEGER |
|
|
chSysSfmCountryCode |
OCTET STRING |
|
|
chSysSfmPartNum |
DisplayString |
|
|
chSysSfmProductRev |
DisplayString |
|
|
chSysSfmProdOrder |
DisplayString |
|
ChRpmUtilEntry |
|
SEQUENCE |
|
|
|
|
chRpmCpuIndex |
Integer32 |
|
|
chRpmCpuType |
F10ProcessorModuleType |
|
|
chRpmCpuUtil5Sec |
Gauge32 |
|
|
chRpmCpuUtil1Min |
Gauge32 |
|
|
chRpmCpuUtil5Min |
Gauge32 |
|
|
chRpmMemUsageUtil |
Gauge32 |
|
ChLineCardUtilEntry |
|
SEQUENCE |
|
|
|
|
chLineCardCpuUtil5Sec |
Gauge32 |
|
|
chLineCardCpuUtil1Min |
Gauge32 |
|
|
chLineCardCpuUtil5Min |
Gauge32 |
|
|
chLineCardMemUsageUtil |
Gauge32 |
|
Defined Values
f10ChassisMib |
1.3.6.1.4.1.6027.3.1 |
Dell Networking OS Chassis MIB. |
MODULE-IDENTITY |
|
|
|
chObjects |
1.3.6.1.4.1.6027.3.1.1.1 |
OBJECT IDENTIFIER |
|
|
|
chType |
1.3.6.1.4.1.6027.3.1.1.1.1 |
The Dell Networking OS type of chassis. |
OBJECT-TYPE |
|
|
|
|
F10ChassisType |
|
|
chMfgDate |
1.3.6.1.4.1.6027.3.1.1.1.4 |
The date the chassis was manufactured.
|
OBJECT-TYPE |
|
|
|
|
F10MfgDate |
|
|
chEcLevel |
1.3.6.1.4.1.6027.3.1.1.1.5 |
The EC Level of the Dell Networking OS chassis. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chNumSlots |
1.3.6.1.4.1.6027.3.1.1.1.8 |
The total number of physical slots
in the chassis for line cards and
route process module (rpm ) cards. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chNumSfmSlots |
1.3.6.1.4.1.6027.3.1.1.1.9 |
The total number of switch fabric
modules (sfm) slots in the chassis. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chNumAirFilters |
1.3.6.1.4.1.6027.3.1.1.1.10 |
The total number of air intake
filters in the chassis. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSlot1to16 |
1.3.6.1.4.1.6027.3.1.1.1.11 |
This object has been obsoleted and will not
be supported by future Dell Networking OS Chassis. The
information here is for reference only.
This variable indicates the slot states.
Each slot occupies a bit. The value 1
indicates slot is in used and 0 indicates
the slot is empty.
The placement of line cards and rpm cards
in a E1200 chassis are as follows :
( physical slot numbers )
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
| | | |
------------- -------------------
| | | |
line cards | | line card
| |
| + ----> RPM card
+-------> RPM card
The most significant bit is slot 1 and the
least significant bit is slot 16.
The placement of line cards and rpm cards
in a E600 chassis are as follows :
( physical slot numbers )
1 2 3 4 5 6 7 8 9
| |
-------------
| | |
line cards | |
| |
| + ----> RPM card
+-------> RPM card
The most significant bit is slot 1 and the
least significant bit is slot 9. |
OBJECT-TYPE |
|
|
|
|
F10SlotState |
|
|
chCountryCode |
1.3.6.1.4.1.6027.3.1.1.1.12 |
The Dell Networking OS manufacturer's y code. |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(2) |
|
chPartNum |
1.3.6.1.4.1.6027.3.1.1.1.13 |
The Dell Networking OS manufacturer's part number. |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
chSysPowerSupplyEntry |
1.3.6.1.4.1.6027.3.1.1.2.1.1 |
A power supply entry containing objects for a
particular power supply. |
OBJECT-TYPE |
|
|
|
|
ChSysPowerSupplyEntry |
|
|
chSysPowerSupplyType |
1.3.6.1.4.1.6027.3.1.1.2.1.1.3 |
The type of the power supply. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ac(1), dc(2) |
|
chSysFanTrayEntry |
1.3.6.1.4.1.6027.3.1.1.2.2.1 |
A fan entry containing objects for a
particular fan tray. |
OBJECT-TYPE |
|
|
|
|
ChSysFanTrayEntry |
|
|
chSysFanTrayOperStatus |
1.3.6.1.4.1.6027.3.1.1.2.2.1.2 |
The status of the fan tray. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
chSysCardTable |
1.3.6.1.4.1.6027.3.1.1.2.3 |
A list of cards resident in the chassis.
The placement of line cards and rpm cards
in the E1200 chassis are as follows :
( physical slot numbers )
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
( Dell Networking OS card number )
0 1 2 3 4 5 6 0 1 7 8 9 10 11 12 13
| | | |
------------- -------------------
| | | |
line card | | line card
| |
| + ----> RPM card
+-------> RPM card
The placement of line cards and rpm cards
in the E600 chassis are as follows :
( physical slot numbers )
1 2 3 4 5 6 7 8 9
( Dell Networking OS card number )
0 1 2 3 4 5 6 0 1
| |
-------------
| | |
line card | |
| |
| + ----> RPM card
+-------> RPM card
The placement of line cards and rpm cards
in the E300 chassis are as follows :
( physical slot numbers )
1 2 3 4 5 6 7 8
( Dell Networking OS card number )
0 1 0 1 2 3 4 5
| |
-----------
| | |
| | line card
| |
| + ----> RPM card
+-------> RPM card
|
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ChSysCardEntry |
|
chSysCardEntry |
1.3.6.1.4.1.6027.3.1.1.2.3.1 |
A list of cards entries containing information
for line card or rpm card. |
OBJECT-TYPE |
|
|
|
|
ChSysCardEntry |
|
|
chSysCardSlotIndex |
1.3.6.1.4.1.6027.3.1.1.2.3.1.1 |
A unique index for each slot within
the chassis.
This value is the physical slot number
and the value is determined
by the chassis slot location where
the card is inserted. Valid entries
are 1 to the value of chNumSlots. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysCardType |
1.3.6.1.4.1.6027.3.1.1.2.3.1.2 |
Type of card in this slot. The type
of cards are defined in F10SystemCardType. |
OBJECT-TYPE |
|
|
|
|
F10SystemCardType |
|
|
chSysCardNumber |
1.3.6.1.4.1.6027.3.1.1.2.3.1.3 |
This is the card number assigned to the line
cards and the RPM cards in the chassis.
The line cards number are from 0 to 13 and the
RPM are from 0 to 1. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysCardUpperTemp |
1.3.6.1.4.1.6027.3.1.1.2.3.1.8 |
The temperature of the card. If
the temperature is too high,
alarm chAlarmCardTemperatureHigh
will be sent. |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
chSysCardNumProcessors |
1.3.6.1.4.1.6027.3.1.1.2.3.1.10 |
The number of Processors in the
card. The number of processors
are depended on the type of card
plugged into the slot. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysCardNumPhyPorts |
1.3.6.1.4.1.6027.3.1.1.2.3.1.11 |
The number of physical ports
in each card. The card can have
one or more ports depending on
the type of cards.
If it is a logical card,
the value set to zero. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysCardNumLgcPorts |
1.3.6.1.4.1.6027.3.1.1.2.3.1.12 |
The number of logical ports
in each card. The card can have
one or more ports depending on
the type of cards.
If it is a physical card,
the value set to zero. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysCardUpTime |
1.3.6.1.4.1.6027.3.1.1.2.3.1.13 |
The SysUpTime for this slot.
This variable indicates the
time since the card
last reset. |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
chSysCardAdminStatus |
1.3.6.1.4.1.6027.3.1.1.2.3.1.14 |
The admin status of the card.
The valid status are as followed:
'up' - card present and ready.
'down' - card is not ready. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
chSysCardFaultStatus |
1.3.6.1.4.1.6027.3.1.1.2.3.1.16 |
The Fault status of the card.
The valid status are as followed:
'on' - the system fault light is on.
'off' - the system fault light is off. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
on(1), off(2) |
|
chSysCardLogStream |
1.3.6.1.4.1.6027.3.1.1.2.3.1.17 |
Reserved field. This fields should
return null. |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
chSysCardCountryCode |
1.3.6.1.4.1.6027.3.1.1.2.3.1.18 |
The card manufacturer's country
code |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(2) |
|
chSysCardParityPhantomError |
1.3.6.1.4.1.6027.3.1.1.2.3.1.22 |
Counters indicating Transient Phantom
Parity Errors on this card.
Applied to Linecards only. |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
chSysPortEntry |
1.3.6.1.4.1.6027.3.1.1.2.4.1 |
A port entry containing objects for a
particular slot. |
OBJECT-TYPE |
|
|
|
|
ChSysPortEntry |
|
|
chSysPortSlotIndex |
1.3.6.1.4.1.6027.3.1.1.2.4.1.1 |
A unique index for each slot within
the chassis. This value is determined by
the chassis slot number where the card
is inserted. Valid entries are 1
to the value of chNumSlots |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysPortIndex |
1.3.6.1.4.1.6027.3.1.1.2.4.1.2 |
A unique index for each slot within the card.
This value is determined by the variable
chSysSlotNumPorts. This value can also be
determined by the chSysCardType.
Valid entries are 1 to the value of
number of ports availabled |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysPortAdminStatus |
1.3.6.1.4.1.6027.3.1.1.2.4.1.4 |
The admin status of the card.
The port admin status is Up if
the user has configured it to be up
otherwise, the admin status is Down. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
chSysPortOperStatus |
1.3.6.1.4.1.6027.3.1.1.2.4.1.5 |
The operational status provides further
condition of the card.
If the chSysPortAdminStatus is 'up', the
valid state is
'ready' - the card is present and
ready and the chSysPortAdminStatus
status is 'up'.
'portDown' - the port is down or not enabled.
'portProblem' - port hardware problems.
'cardProblem' - not used. Same as cardDown.
'cardDown' - the card is downed.
'notPresent' - the card is not present. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ready(1), portDown(2), portProblem(3), cardProblem(4), cardDown(5), notPresent(6) |
|
chSysPortIfIndex |
1.3.6.1.4.1.6027.3.1.1.2.4.1.6 |
The index of ifIndex in the Interface Mib.
This index can link to the ifEntry to get
this interface/port information |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysProcessorEntry |
1.3.6.1.4.1.6027.3.1.1.2.6.1 |
A list of Processor entries. |
OBJECT-TYPE |
|
|
|
|
ChSysProcessorEntry |
|
|
chSysProcessorSlotIndex |
1.3.6.1.4.1.6027.3.1.1.2.6.1.1 |
A unique index for each slot within
the chassis. This value is determined by
the chassis slot number where the card
is inserted. Valid entries are 1
to the value of chNumSlots |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysProcessorIndex |
1.3.6.1.4.1.6027.3.1.1.2.6.1.2 |
A unique index for each Processor within the
card. This value is determined by the variable
chSysSlotNumProcessors. the valid entries
are 1 to the value of number of processors |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysProcessorLogStream |
1.3.6.1.4.1.6027.3.1.1.2.6.1.7 |
Reserved field. Currently,
this field should return
NULL. |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
chSysSwModuleEntry |
1.3.6.1.4.1.6027.3.1.1.2.7.1 |
A software module entry containing version
number information for a particular processor. |
OBJECT-TYPE |
|
|
|
|
ChSysSwModuleEntry |
|
|
chSysSwSlotIndex |
1.3.6.1.4.1.6027.3.1.1.2.7.1.1 |
A unique index for each slot within
the chassis. This value is determined by
the chassis slot number where the card
is inserted. Valid entries are 1
to the value of chNumSlots |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysSwProcessorIndex |
1.3.6.1.4.1.6027.3.1.1.2.7.1.2 |
A unique index for each CPU within the card.
This value is determined by the variable
chSysSlotNumCPUs. This value can also be
determined by the chSysSlotType.
Valid entries are 1 to the value of
number of cpu |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysSwRuntimeImgVersion |
1.3.6.1.4.1.6027.3.1.1.2.7.1.3 |
This variable indicates the software
module version that is currently
running on the processor.
The software release version is in
the format as follow:
........
'1.1' indicate major version of 1 and
minor release of 1. |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
chSysSwCurrentBootImgVersion |
1.3.6.1.4.1.6027.3.1.1.2.7.1.5 |
The software release version is in
the format as follow:
........
'1.1' indicate major version of 1 and
minor release of 1. |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
chSysSwCurrentBootImgDate |
1.3.6.1.4.1.6027.3.1.1.2.7.1.6 |
The release date of this software module
If the CPU is reset, the software module
running date (chSysSwModuleRunningDate)
will change to this current date. |
OBJECT-TYPE |
|
|
|
|
DateAndTime |
|
|
chSysSwBackupBootImgVersion |
1.3.6.1.4.1.6027.3.1.1.2.7.1.8 |
The software release version is in
the format as follow:
........
'1.1' indicate major version of 1 and
minor release of 1. |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
chSysSwBackupBootImgStatus |
1.3.6.1.4.1.6027.3.1.1.2.7.1.10 |
The status of the backup boot image. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ok(1), failed(2) |
|
chSysSwNextRebootImage |
1.3.6.1.4.1.6027.3.1.1.2.7.1.11 |
The boot flash image selection. When the
chassis is rebooted, this is the boot
image to use. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
bootImage-A(1), bootImage-B(2) |
|
chSysSwCurrentBootImage |
1.3.6.1.4.1.6027.3.1.1.2.7.1.12 |
The current boot image. This is the boot image described by the
chSysSwCurrentBootImgVersion, chSysSwCurrentBootImgDate, and
chSysSwCurrentBootImgStatus objects.
|
OBJECT-TYPE |
|
|
|
|
INTEGER |
bootImage-A(1), bootImage-B(2) |
|
chSysSfmEntry |
1.3.6.1.4.1.6027.3.1.1.2.8.1 |
A SFM entry containing objects for a
particular slot. |
OBJECT-TYPE |
|
|
|
|
ChSysSfmEntry |
|
|
chSysSfmIndex |
1.3.6.1.4.1.6027.3.1.1.2.8.1.1 |
A unique index for each SFM within
the chassis. The number of SFM slots
can be determined with chNumSfmSlots. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chSysSfmAdminStatus |
1.3.6.1.4.1.6027.3.1.1.2.8.1.6 |
The admin status of
each SFM. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
up(1), down(2) |
|
chSysSfmOperStatus |
1.3.6.1.4.1.6027.3.1.1.2.8.1.7 |
The Operational status provides further
condition of Switch Fabric Module card.
If the chSysSfmAdminStatus is 'up', the
valid state is
'active' - the card is present and
ready and the chSysSfmAdminStatus
status is 'up'.
If the chSysCardOperStatus is 'down', the
service states can be as followed:
'absent' - the card is not present.
'standby' - the card is in standby mode.
'incomp' - incompatible with current sfm switch mode.
|
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), absent(2), standby(3), incomp(4) |
|
chSysSfmErrorStatus |
1.3.6.1.4.1.6027.3.1.1.2.8.1.8 |
The Operational status provides further
condition of Switch Fabric Module card.
If the chSysSfmAdminStatus is 'up', the
valid state is
'ok' - the card is present and
ready and the chSysSfmAdminStatus
status is 'up'.
If the chSysSfmAdminStatus is 'down', the
error status can be as followed:
'not-available' - status not available.
'error' - the card is in error state. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ok(1), error(2), not-available(3) |
|
chSysSfmCountryCode |
1.3.6.1.4.1.6027.3.1.1.2.8.1.9 |
The SFM manufacturer's country
code |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(2) |
|
chSfmUtil5Sec |
1.3.6.1.4.1.6027.3.1.1.2.9.1 |
SFM utilization in percentage for last 5 Seconds. |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
chSfmUtil1Min |
1.3.6.1.4.1.6027.3.1.1.2.9.2 |
SFM utilization in percentage for last 1 minute. |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
chSfmUtil5Min |
1.3.6.1.4.1.6027.3.1.1.2.9.3 |
SFM utilization in percentage for last 5 minute. |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
chRpmNumRpms |
1.3.6.1.4.1.6027.3.1.1.3.1 |
The number of RPM installed
in the chassis. There is always one
primary RPM, but a secondary RPM can
also be installed as backup. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chRpmSlotNumber |
1.3.6.1.4.1.6027.3.1.1.3.2 |
The primary routing process module
slot number. If the primary RPM is
switched to secondary RPM, the slot
number will be updated here. |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chRpmUptime |
1.3.6.1.4.1.6027.3.1.1.3.3 |
SysUpTime of the last time the RPM
is reset. Used the SysUpTime of the
control processor as this variable. |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
chRpmCOAlarmStatus |
1.3.6.1.4.1.6027.3.1.1.3.5 |
The Central Office (CO) Alarm on RPM card.
The valid status are as followed:
'off' - CO Alarm light is off.
'on' - CO Alarm light is on.
Please refer to Dell Networking OS Alarm document -
Appendix C for the condition when this
CO alarm is triggered.
|
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), on(2) |
|
chRpmFlashStatus |
1.3.6.1.4.1.6027.3.1.1.3.6 |
The Compact Flash on RPM card.
The valid status are as followed:
'absent' - external flash is not present.
'present' - external flash is present.
|
OBJECT-TYPE |
|
|
|
|
INTEGER |
absent(1), present(2) |
|
chRpmUtilTable |
1.3.6.1.4.1.6027.3.1.1.3.7 |
A table listing the cpu and memory utilization
in master RPM. |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ChRpmUtilEntry |
|
chRpmUtilEntry |
1.3.6.1.4.1.6027.3.1.1.3.7.1 |
A row in each processor cpu and mmory utilization |
OBJECT-TYPE |
|
|
|
|
ChRpmUtilEntry |
|
|
chRpmCpuIndex |
1.3.6.1.4.1.6027.3.1.1.3.7.1.1 |
A unique index for each Processor within the
RPM. This value is determined by the variable
chSysSlotNumProcessors. the valid entries
are 1 to the value of number of processors |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
chRpmCpuUtil5Sec |
1.3.6.1.4.1.6027.3.1.1.3.7.1.3 |
CPU utilization in percentage for last 5 seconds. |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
chRpmCpuUtil1Min |
1.3.6.1.4.1.6027.3.1.1.3.7.1.4 |
CPU utilization in percentage for last 1 minute. |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
chRpmCpuUtil5Min |
1.3.6.1.4.1.6027.3.1.1.3.7.1.5 |
CPU utilization in percentage for last 5 minutes. |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..100 |
|
chRpmMajorAlarmStatus |
1.3.6.1.4.1.6027.3.1.1.3.8 |
The Major Alarm LED on the Primary RPM card. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), on(2) |
|
chRpmMinorAlarmStatus |
1.3.6.1.4.1.6027.3.1.1.3.9 |
The Minor Alarm LED on the Primary RPM card. |
OBJECT-TYPE |
|
|
|
|
INTEGER |
off(1), on(2) |
|
chLineCardUtilEntry |
1.3.6.1.4.1.6027.3.1.1.5.1.1 |
A row in each line card cpu and memory utilization |
OBJECT-TYPE |
|
|
|
|
ChLineCardUtilEntry |
|
|
chAlarmVarInteger |
1.3.6.1.4.1.6027.3.1.1.4.1.1 |
An generic integer value in the TRAP object |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
chAlarmVarString |
1.3.6.1.4.1.6027.3.1.1.4.1.2 |
An generic string value in the TRAP object |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
chAlarmVarSlot |
1.3.6.1.4.1.6027.3.1.1.4.1.3 |
The chassis slot number.
For the traps that does not have slot information the value will
-1 in the TRAP PDU.
|
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
chAlarmVarPort |
1.3.6.1.4.1.6027.3.1.1.4.1.4 |
The chassis port number.
For the traps that does not have port information the value will
-1 in the TRAP PDU.
|
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
chAlarmCardDown |
1.3.6.1.4.1.6027.3.1.1.4.0.1 |
The driver/agent generate this trap when a
card operational status is down. |
NOTIFICATION-TYPE |
|
|
|
chAlarmCardUp |
1.3.6.1.4.1.6027.3.1.1.4.0.2 |
The driver/agent generate this trap when a
card operational status is up. |
NOTIFICATION-TYPE |
|
|
|
chAlarmCardReset |
1.3.6.1.4.1.6027.3.1.1.4.0.3 |
The driver/agent generate this trap when a
card is reset. |
NOTIFICATION-TYPE |
|
|
|
chAlarmCardOffline |
1.3.6.1.4.1.6027.3.1.1.4.0.4 |
The driver/agent generate this trap when a
card is set to offline. |
NOTIFICATION-TYPE |
|
|
|
chAlarmCardMismatch |
1.3.6.1.4.1.6027.3.1.1.4.0.5 |
The driver/agent generate this trap when a
card is not the same as configured |
NOTIFICATION-TYPE |
|
|
|
chAlarmCardRemove |
1.3.6.1.4.1.6027.3.1.1.4.0.6 |
The driver/agent generate this trap when a
card is removed |
NOTIFICATION-TYPE |
|
|
|
chAlarmCardProblem |
1.3.6.1.4.1.6027.3.1.1.4.0.7 |
The driver/agent generate this trap when a
card is indicated wht status card problem |
NOTIFICATION-TYPE |
|
|
|
chAlarmCutoff |
1.3.6.1.4.1.6027.3.1.1.4.0.8 |
This trap is generated if the alarm
cut off button on RPM is pressed. |
NOTIFICATION-TYPE |
|
|
|
chAlarmSfmUp |
1.3.6.1.4.1.6027.3.1.1.4.0.9 |
The driver/agent generate this trap when a
SFM operational status is up. |
NOTIFICATION-TYPE |
|
|
|
chAlarmSfmDown |
1.3.6.1.4.1.6027.3.1.1.4.0.10 |
The driver/agent generate this trap when a
SFM operational status is down. |
NOTIFICATION-TYPE |
|
|
|
chAlarmRpmUp |
1.3.6.1.4.1.6027.3.1.1.4.0.11 |
The primary RPM generate this trap when the primary RPM or
the secondary RPM is up and running. |
NOTIFICATION-TYPE |
|
|
|
chAlarmRpmDown |
1.3.6.1.4.1.6027.3.1.1.4.0.12 |
The primary RPM generate this trap when the secondary RPM is
down, either by software reset or being physically removed from
the chassis. |
NOTIFICATION-TYPE |
|
|
|
chAlarmPowersupplyDown |
1.3.6.1.4.1.6027.3.1.1.4.0.13 |
The driver/agent generate this trap when a
power supply is not operational. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMinorTemperatureHigh |
1.3.6.1.4.1.6027.3.1.1.4.0.14 |
The driver/agent generate this trap when the
chassis's temperature exceed the minor threshold. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMajorTemperatureHigh |
1.3.6.1.4.1.6027.3.1.1.4.0.15 |
The driver/agent generate this trap when the
chassis's temperature exceede the major threshold. |
NOTIFICATION-TYPE |
|
|
|
chAlarmFanTrayDown |
1.3.6.1.4.1.6027.3.1.1.4.0.16 |
The driver/agent generate this trap when a
fan tray is missing or down. |
NOTIFICATION-TYPE |
|
|
|
chAlarmPowersupplyClear |
1.3.6.1.4.1.6027.3.1.1.4.0.17 |
The driver/agent generate this trap when a
power supply is now operational. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMinorTemperatureClear |
1.3.6.1.4.1.6027.3.1.1.4.0.18 |
The driver/agent generate this trap when the
chassis's temperature within the minor threshold. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMajorTemperatureClear |
1.3.6.1.4.1.6027.3.1.1.4.0.19 |
The driver/agent generate this trap when the
chassis's temperature within the major threshold. |
NOTIFICATION-TYPE |
|
|
|
chAlarmFanTrayClear |
1.3.6.1.4.1.6027.3.1.1.4.0.20 |
The driver/agent generate this trap when a
fan tray is now operational. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMinorFanBadClear |
1.3.6.1.4.1.6027.3.1.1.4.0.21 |
The driver/agent generate this trap when a
minor fan tray that was bad is now operational. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMajorSfmDown |
1.3.6.1.4.1.6027.3.1.1.4.0.22 |
The driver/agent generate this trap when a
majority of SFM are down. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMajorSfmDownClr |
1.3.6.1.4.1.6027.3.1.1.4.0.23 |
The driver/agent generate this trap when a
majority of SFM were down are now operational. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMinorSfmDown |
1.3.6.1.4.1.6027.3.1.1.4.0.24 |
The driver/agent generate this trap when a
majority of SFM are down. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMinorSfmDownClr |
1.3.6.1.4.1.6027.3.1.1.4.0.25 |
The driver/agent generate this trap when a
majority of SFM were down are now operational. |
NOTIFICATION-TYPE |
|
|
|
chAlarmTaskSuspend |
1.3.6.1.4.1.6027.3.1.1.4.0.26 |
The system generate this trap when a
a task is suspended. |
NOTIFICATION-TYPE |
|
|
|
chAlarmTaskTerm |
1.3.6.1.4.1.6027.3.1.1.4.0.27 |
The system generate this trap when a
a task is terminated. |
NOTIFICATION-TYPE |
|
|
|
chAlarmVrrpGoMaster |
1.3.6.1.4.1.6027.3.1.1.4.0.28 |
The VRRP generate this trap when it
become a backup |
NOTIFICATION-TYPE |
|
|
|
chAlarmVrrpGiveupMaster |
1.3.6.1.4.1.6027.3.1.1.4.0.29 |
The VRRP generate this trap when it
is no longer the master and has entered non-operational state. |
NOTIFICATION-TYPE |
|
|
|
chAlarmBgpEstb |
1.3.6.1.4.1.6027.3.1.1.4.0.30 |
BGP task neighbour established. |
NOTIFICATION-TYPE |
|
|
|
chAlarmBgpXsition |
1.3.6.1.4.1.6027.3.1.1.4.0.31 |
BGP task is in transition.
|
NOTIFICATION-TYPE |
|
|
|
chAlarmMajorPS |
1.3.6.1.4.1.6027.3.1.1.4.0.32 |
The agent generate this trap when a
power supply major alarm is issued. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMajorPSClr |
1.3.6.1.4.1.6027.3.1.1.4.0.33 |
The agent generate this trap when a
power supply major alarm is cleared. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMinorPS |
1.3.6.1.4.1.6027.3.1.1.4.0.34 |
The agent generate this trap when a
power supply minor alarm is issued. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMinorPSClr |
1.3.6.1.4.1.6027.3.1.1.4.0.35 |
The agent generate this trap when a
power supply minor alarm is cleared. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMinorFanBad |
1.3.6.1.4.1.6027.3.1.1.4.0.36 |
The agent generate this trap when
fan is bad. |
NOTIFICATION-TYPE |
|
|
|
chAlarmExdCpuThreshold |
1.3.6.1.4.1.6027.3.1.1.4.0.37 |
The agent generate this trap when
cpu utilization excceded 80%. |
NOTIFICATION-TYPE |
|
|
|
chAlarmClrCpuThreshold |
1.3.6.1.4.1.6027.3.1.1.4.0.38 |
The agent generate this trap when
cpu utilization falls below threshold. |
NOTIFICATION-TYPE |
|
|
|
chAlarmExdMemThreshold |
1.3.6.1.4.1.6027.3.1.1.4.0.39 |
The agent generate this trap when
memory utilization excceded 92%. |
NOTIFICATION-TYPE |
|
|
|
chAlarmClrMemThreshold |
1.3.6.1.4.1.6027.3.1.1.4.0.40 |
The agent generate this trap when
memory utilization falls below threshold. |
NOTIFICATION-TYPE |
|
|
|
chAlarmMacStationMove |
1.3.6.1.4.1.6027.3.1.1.4.0.41 |
The agent generate this trap when a MAC station move exceed the
threshold.
|
NOTIFICATION-TYPE |
|
|
|
chAlarmSfmAdd |
1.3.6.1.4.1.6027.3.1.1.4.0.42 |
The agent generate this trap when a SFM is added to the chassis.
|
NOTIFICATION-TYPE |
|
|
|
chAlarmSfmRemove |
1.3.6.1.4.1.6027.3.1.1.4.0.43 |
The agent generate this trap when a SFM is removed from the chassis.
|
NOTIFICATION-TYPE |
|
|
|
chAlarmRpmPrimary |
1.3.6.1.4.1.6027.3.1.1.4.0.44 |
The agent generate this trap when a standby RPM become Primary RPM
after fail-over.
|
NOTIFICATION-TYPE |
|
|
|
chSnmpIpAclDeny |
1.3.6.1.4.1.6027.3.1.1.4.0.45 |
The agent generate this trap when SNMP Agent deny a SNMP request
based on the IP ACL rules.
|
NOTIFICATION-TYPE |
|
|
|
chAlarmSRAMParityErrorDetect |
1.3.6.1.4.1.6027.3.1.1.4.0.47 |
The agent generate this trap when a linecard detects SRAM
parity error and then tries to recover but can't recover
that section.
|
NOTIFICATION-TYPE |
|
|
|
chAlarmAcDcMixedPowerSupplyDetect |
1.3.6.1.4.1.6027.3.1.1.4.0.48 |
The agent generate this trap when a system detects AC and
DC mixed power supply.
Applied to C-series only.
|
NOTIFICATION-TYPE |
|
|
|
chAlarmCardVersionMismatch |
1.3.6.1.4.1.6027.3.1.1.4.0.56 |
The driver/agent generate this trap when a
card is not the same software version as a Management unit.
Applied to S-series stackin only. |
NOTIFICATION-TYPE |
|
|
|
chAlarmUnsupportedOptic |
1.3.6.1.4.1.6027.3.1.1.4.0.57 |
The Interface Agent generate this trap when an unsupported optic
is inserted in a port |
NOTIFICATION-TYPE |
|
|
|
chAlarmFanTrayOrPsuDown |
1.3.6.1.4.1.6027.3.1.1.4.0.58 |
The driver/agent generate this trap when a
fan tray or psu is missing or down. |
NOTIFICATION-TYPE |
|
|
|
chAlarmFanTrayOrPsuClear |
1.3.6.1.4.1.6027.3.1.1.4.0.59 |
The driver/agent generate this trap when a
fan tray or psu is now operational. |
NOTIFICATION-TYPE |
|
|
|
f10ChassisMibCompliance |
1.3.6.1.4.1.6027.3.1.2.1.1 |
The compliance statement for Dell Networking OS
product which implement the f10
Chassis MIB. |
MODULE-COMPLIANCE |
|
|
|
f10ComponentGroup |
1.3.6.1.4.1.6027.3.1.2.2.1 |
A collection of objects providing the
overall chassis information. |
OBJECT-GROUP |
|
|
|
f10SystemGroup |
1.3.6.1.4.1.6027.3.1.2.2.2 |
A collection of objects providing the
chassis system hardware information. |
OBJECT-GROUP |
|
|
|
f10RpmGroup |
1.3.6.1.4.1.6027.3.1.2.2.3 |
A collection of objects providing the
Route Process Module (RPM) information. |
OBJECT-GROUP |
|
|
|
f10LineCardGroup |
1.3.6.1.4.1.6027.3.1.2.2.4 |
A collection of objects providing
CPU and Memory Utilization in the Line cards. |
OBJECT-GROUP |
|
|
|