EdgeSwitch-QOS-ACL-MIB
File:
EdgeSwitch-QOS-ACL-MIB.mib (74041 bytes)
Imported modules
Imported symbols
Defined Types
EtypeValue |
|
Ethertype value of a packet. The allowed value is 0x0600 to 0xFFFF. |
TEXTUAL-CONVENTION |
|
|
|
|
Unsigned32 |
1536..65535 |
|
Ipv6AddressPrefix |
|
This data type is used to model IPv6 address prefixes. This is a binary
string of up to 16 octets in network byte-order. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
AclBurstSize |
|
The number of kilobytes (Kbytes) in a packet that may be sent in a
traffic stream without regard for other traffic streams. |
TEXTUAL-CONVENTION |
|
|
|
|
Unsigned32 |
1..128 |
|
AclEntry |
|
SEQUENCE |
|
|
|
|
aclIndex |
Integer32 |
|
|
aclStatus |
RowStatus |
|
|
aclName |
DisplayString |
|
AclIfEntry |
|
SEQUENCE |
|
|
|
|
aclIfIndex |
Integer32 |
|
|
aclIfDirection |
INTEGER |
|
|
aclIfSequence |
Unsigned32 |
|
|
aclIfAclType |
INTEGER |
|
|
aclIfAclId |
Integer32 |
|
|
aclIfStatus |
RowStatus |
|
AclRuleEntry |
|
SEQUENCE |
|
|
|
|
aclRuleIndex |
Integer32 |
|
|
aclRuleAction |
INTEGER |
|
|
aclRuleProtocol |
Integer32 |
|
|
aclRuleSrcIpAddress |
IpAddress |
|
|
aclRuleSrcIpMask |
IpAddress |
|
|
aclRuleSrcL4Port |
Integer32 |
|
|
aclRuleSrcL4PortRangeStart |
Integer32 |
|
|
aclRuleSrcL4PortRangeEnd |
Integer32 |
|
|
aclRuleDestIpAddress |
IpAddress |
|
|
aclRuleDestIpMask |
IpAddress |
|
|
aclRuleDestL4Port |
Integer32 |
|
|
aclRuleDestL4PortRangeStart |
Integer32 |
|
|
aclRuleDestL4PortRangeEnd |
Integer32 |
|
|
aclRuleIPDSCP |
Integer32 |
|
|
aclRuleIpPrecedence |
Integer32 |
|
|
aclRuleIpTosBits |
Integer32 |
|
|
aclRuleIpTosMask |
Integer32 |
|
|
aclRuleStatus |
RowStatus |
|
|
aclRuleAssignQueueId |
Unsigned32 |
|
|
aclRuleRedirectIntf |
InterfaceIndexOrZero |
|
|
aclRuleMatchEvery |
TruthValue |
|
|
aclRuleMirrorIntf |
InterfaceIndexOrZero |
|
|
aclRuleLogging |
TruthValue |
|
|
aclRuleTimeRangeName |
DisplayString |
|
|
aclRuleTimeRangeStatus |
INTEGER |
|
|
aclRuleRateLimitCrate |
Unsigned32 |
|
|
aclRuleRateLimitCburst |
AclBurstSize |
|
|
aclRuleIcmpType |
Integer32 |
|
|
aclRuleIcmpCode |
Integer32 |
|
|
aclRuleIgmpType |
Integer32 |
|
|
aclRuleEstablished |
TruthValue |
|
|
aclRuleFragments |
TruthValue |
|
AclMacEntry |
|
SEQUENCE |
|
|
|
|
aclMacIndex |
Integer32 |
|
|
aclMacName |
DisplayString |
|
|
aclMacStatus |
RowStatus |
|
AclMacRuleEntry |
|
SEQUENCE |
|
|
|
|
aclMacRuleIndex |
Integer32 |
|
|
aclMacRuleAction |
INTEGER |
|
|
aclMacRuleCos |
Unsigned32 |
|
|
aclMacRuleCos2 |
Unsigned32 |
|
|
aclMacRuleDestMacAddr |
MacAddress |
|
|
aclMacRuleDestMacMask |
MacAddress |
|
|
aclMacRuleEtypeKey |
INTEGER |
|
|
aclMacRuleEtypeValue |
EtypeValue |
|
|
aclMacRuleSrcMacAddr |
MacAddress |
|
|
aclMacRuleSrcMacMask |
MacAddress |
|
|
aclMacRuleVlanId |
Unsigned32 |
|
|
aclMacRuleVlanIdRangeStart |
Unsigned32 |
|
|
aclMacRuleVlanIdRangeEnd |
Unsigned32 |
|
|
aclMacRuleVlanId2 |
Unsigned32 |
|
|
aclMacRuleVlanId2RangeStart |
Unsigned32 |
|
|
aclMacRuleVlanId2RangeEnd |
Unsigned32 |
|
|
aclMacRuleStatus |
RowStatus |
|
|
aclMacRuleAssignQueueId |
Unsigned32 |
|
|
aclMacRuleRedirectIntf |
InterfaceIndexOrZero |
|
|
aclMacRuleMatchEvery |
TruthValue |
|
|
aclMacRuleMirrorIntf |
InterfaceIndexOrZero |
|
|
aclMacRuleLogging |
TruthValue |
|
|
aclMacRuleTimeRangeName |
DisplayString |
|
|
aclMacRuleTimeRangeStatus |
INTEGER |
|
|
aclMacRuleRateLimitCrate |
Unsigned32 |
|
|
aclMacRuleRateLimitCburst |
AclBurstSize |
|
AclIpv6Entry |
|
SEQUENCE |
|
|
|
|
aclIpv6Index |
Integer32 |
|
|
aclIpv6Name |
DisplayString |
|
|
aclIpv6Status |
RowStatus |
|
AclIpv6RuleEntry |
|
SEQUENCE |
|
|
|
|
aclIpv6RuleIndex |
Integer32 |
|
|
aclIpv6RuleAction |
INTEGER |
|
|
aclIpv6RuleLogging |
TruthValue |
|
|
aclIpv6RuleAssignQueueId |
Unsigned32 |
|
|
aclIpv6RuleRedirectIntf |
InterfaceIndexOrZero |
|
|
aclIpv6RuleMirrorIntf |
InterfaceIndexOrZero |
|
|
aclIpv6RuleMatchEvery |
TruthValue |
|
|
aclIpv6RuleProtocol |
Integer32 |
|
|
aclIpv6RuleSrcL4Port |
Integer32 |
|
|
aclIpv6RuleSrcL4PortRangeStart |
Integer32 |
|
|
aclIpv6RuleSrcL4PortRangeEnd |
Integer32 |
|
|
aclIpv6RuleDestL4Port |
Integer32 |
|
|
aclIpv6RuleDestL4PortRangeStart |
Integer32 |
|
|
aclIpv6RuleDestL4PortRangeEnd |
Integer32 |
|
|
aclIpv6RuleFlowLabel |
Integer32 |
|
|
aclIpv6RuleIPDSCP |
Integer32 |
|
|
aclIpv6RuleStatus |
RowStatus |
|
|
aclRuleSrcIpv6Prefix |
Ipv6AddressPrefix |
|
|
aclRuleSrcIpv6PrefixLength |
Integer32 |
|
|
aclRuleDstIpv6Prefix |
Ipv6AddressPrefix |
|
|
aclRuleDstIpv6PrefixLength |
Integer32 |
|
|
aclIpv6RuleTimeRangeName |
DisplayString |
|
|
aclIpv6RuleTimeRangeStatus |
INTEGER |
|
|
aclIpv6RuleRateLimitCrate |
Unsigned32 |
|
|
aclIpv6RuleRateLimitCburst |
AclBurstSize |
|
|
aclIpv6RuleIcmpType |
Integer32 |
|
|
aclIpv6RuleIcmpCode |
Integer32 |
|
|
aclIpv6RuleRouting |
TruthValue |
|
|
aclIpv6RuleFragments |
TruthValue |
|
|
aclIpv6RuleEstablished |
TruthValue |
|
AclVlanEntry |
|
SEQUENCE |
|
|
|
|
aclVlanIndex |
Integer32 |
|
|
aclVlanDirection |
INTEGER |
|
|
aclVlanSequence |
Unsigned32 |
|
|
aclVlanAclType |
INTEGER |
|
|
aclVlanAclId |
Integer32 |
|
|
aclVlanStatus |
RowStatus |
|
Defined Values
fastPathQOSACL |
1.3.6.1.4.1.4413.1.1.3.2 |
The MIB definitions for Quality of Service - ACL Flex package. |
MODULE-IDENTITY |
|
|
|
aclNamedIpv4IndexNextFree |
1.3.6.1.4.1.4413.1.1.3.2.14 |
This object contains an unused value for the aclIndex
to be used when creating a new named IPv4 ACL. A value of zero
zero indicates the ACL table is full. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclTable |
1.3.6.1.4.1.4413.1.1.3.2.1 |
A table of ACL instances. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclEntry |
|
aclEntry |
1.3.6.1.4.1.4413.1.1.3.2.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclEntry |
|
|
aclIndex |
1.3.6.1.4.1.4413.1.1.3.2.1.1.1 |
The IP ACL table index this instance is associated with. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclStatus |
1.3.6.1.4.1.4413.1.1.3.2.1.1.2 |
Status of this instance. Entries can not be deleted until all rows in
the aclIfTable and aclRuleTable with corresponding values of aclIndex
have been deleted.
active(1) - this ACL instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
aclName |
1.3.6.1.4.1.4413.1.1.3.2.1.1.3 |
The name of this IPv4 ACL entry, which must consist of
1 to 31 alphanumeric characters and uniquely identify
this IPv4 ACL. An existing IPv4 ACL can be renamed by
setting this object to a new name.
This object must be set to complete a new IPv4 ACL
row instance. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
aclIfTable |
1.3.6.1.4.1.4413.1.1.3.2.8 |
A table of ACL interface instances per direction. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclIfEntry |
|
aclIfEntry |
1.3.6.1.4.1.4413.1.1.3.2.8.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclIfEntry |
|
|
aclIfIndex |
1.3.6.1.4.1.4413.1.1.3.2.8.1.1 |
The interface to which this ACL instance applies. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclIfDirection |
1.3.6.1.4.1.4413.1.1.3.2.8.1.2 |
The interface direction to which this ACL instance applies. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inbound(1), outbound(2) |
|
aclIfSequence |
1.3.6.1.4.1.4413.1.1.3.2.8.1.3 |
The relative evaluation sequence of this ACL for this
interface and direction. When multiple ACLs are allowed
for a given interface and direction, the sequence number
determines the order in which the list of ACLs are evaluated,
with lower sequence numbers given higher precedence. The
sequence number value is arbitrary, but must be a unique
non-zero value for a given interface and direction.
Setting this object to an existing sequence number
value for a given interface and direction causes the
ACL corresponding to that value to be replaced with
this ACL. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4294967295 |
|
aclIfAclType |
1.3.6.1.4.1.4413.1.1.3.2.8.1.4 |
The type of this ACL, which is used to interpret the
aclIfId object value. Each type of ACL uses its own
numbering scheme for identification (see aclIfAclId object
for details).
The aclIfAclId object must be specified along with this
object. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ip(1), mac(2), ipv6(3) |
|
aclIfAclId |
1.3.6.1.4.1.4413.1.1.3.2.8.1.5 |
The ACL identifier value, which is interpreted based on
the aclIfType object.
For the IP ACLs, the actual ACL number is its identifier
as follows: IP standard ranges from 1-99, while
IP extended ranges from 100-199. Here, aclIfAclId represents
aclIndex.
The MAC ACLs use an internally-generated index value
that is assigned when the ACL is created.Here, aclIfAclId
represents aclMacIndex.
The IPv6 ACLs use an internally-generated index value
that is assigned when the ACL is created.Here, aclVlanAclId
represents aclIpv6Index.
The aclIfType object must be specified along with
this object. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclIfStatus |
1.3.6.1.4.1.4413.1.1.3.2.8.1.6 |
Status of this instance.
active(1) - this ACL interface instance is active
createAndGo(4) - set to this value to assign an ACL to an interface and direction
destroy(6) - set to this value to remove an ACL from an interface and direction |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
aclRuleTable |
1.3.6.1.4.1.4413.1.1.3.2.4 |
A table of IP ACL Rule instances. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclRuleEntry |
|
aclRuleEntry |
1.3.6.1.4.1.4413.1.1.3.2.4.1 |
A table of IP ACL Classification Rules |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclRuleEntry |
|
|
aclRuleIndex |
1.3.6.1.4.1.4413.1.1.3.2.4.1.1 |
The index of this rule instance within an IP ACL. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclRuleAction |
1.3.6.1.4.1.4413.1.1.3.2.4.1.2 |
The type of action this rule should perform. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
permit(1), deny(2) |
|
aclRuleProtocol |
1.3.6.1.4.1.4413.1.1.3.2.4.1.3 |
icmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
aclRuleSrcIpAddress |
1.3.6.1.4.1.4413.1.1.3.2.4.1.4 |
The Source IP Address used in the ACL Classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
aclRuleSrcIpMask |
1.3.6.1.4.1.4413.1.1.3.2.4.1.5 |
The Source IP Mask used in the ACL Classification.
This mask is expressed using wild-card notation,which
is the 1's compliment of traditional Subnet Masks.
Here, the 'Don't care bits' are represented by binary 1's and
'Do care bits' are represented by binary 0's. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
aclRuleSrcL4Port |
1.3.6.1.4.1.4413.1.1.3.2.4.1.6 |
The Source Port Number (Layer 4) used in the ACL Classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclRuleDestIpAddress |
1.3.6.1.4.1.4413.1.1.3.2.4.1.9 |
The Destination IP Address used in the ACL Classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
aclRuleDestIpMask |
1.3.6.1.4.1.4413.1.1.3.2.4.1.10 |
The Destination IP Mask used in the ACL Classification.
This mask is expressed using wild-card notation,which
is the 1's compliment of traditional Subnet Masks.
Here, the 'Don't care bits' are represented by binary 1's and
'Do care bits' are represented by binary 0's. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
aclRuleDestL4Port |
1.3.6.1.4.1.4413.1.1.3.2.4.1.11 |
The Destination Port (Layer 4) used in ACl classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclRuleDestL4PortRangeStart |
1.3.6.1.4.1.4413.1.1.3.2.4.1.12 |
The Destination Port (Layer 4) starting range used in ACL classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclRuleDestL4PortRangeEnd |
1.3.6.1.4.1.4413.1.1.3.2.4.1.13 |
The Destination Port (Layer 4) ending range used in ACL classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclRuleIPDSCP |
1.3.6.1.4.1.4413.1.1.3.2.4.1.14 |
The Differentiated Services Code Point value. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclRuleIpPrecedence |
1.3.6.1.4.1.4413.1.1.3.2.4.1.15 |
The Type of Service (TOS) IP Precedence value. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclRuleIpTosBits |
1.3.6.1.4.1.4413.1.1.3.2.4.1.16 |
The Type of Service (TOS) Bits value. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclRuleIpTosMask |
1.3.6.1.4.1.4413.1.1.3.2.4.1.17 |
The Type of Service (TOS) Mask value. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclRuleStatus |
1.3.6.1.4.1.4413.1.1.3.2.4.1.18 |
Status of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
aclRuleAssignQueueId |
1.3.6.1.4.1.4413.1.1.3.2.4.1.19 |
Queue identifier to which all inbound packets matching this
ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the number of assignable queues in the
system:
1-3 queues: 0
4-7 queues: 1
8 queues: 2
This default assignment is static and is not influenced by
other system configuration changes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
aclRuleRedirectIntf |
1.3.6.1.4.1.4413.1.1.3.2.4.1.20 |
A non-zero value indicates the external ifIndex to which all
inbound packets matching this ACL rule are directed. A
value of zero means packet redirection is not in effect, which
is the default value of this object. Note that packet
redirection and mirroring (aclRuleMirrorIntf object)
are mutually-exclusive rule attributes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
aclRuleMatchEvery |
1.3.6.1.4.1.4413.1.1.3.2.4.1.21 |
Flag to indicate that the ACL rule is defined to match on every IP packet,
regardless of content. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclRuleMirrorIntf |
1.3.6.1.4.1.4413.1.1.3.2.4.1.22 |
A non-zero value indicates the external ifIndex to which all
inbound packets matching this ACL rule are copied. A
value of zero means packet mirroring is not in effect, which
is the default value of this object. Note that packet
mirroring and redirection (aclRuleRedirectIntf object)
are mutually-exclusive rule attributes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
aclRuleLogging |
1.3.6.1.4.1.4413.1.1.3.2.4.1.23 |
Flag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
This object may be supported for an aclRuleAction
setting of permit(1) and/or deny(2), depending on the
ACL feature capabilities of the device. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclRuleTimeRangeName |
1.3.6.1.4.1.4413.1.1.3.2.4.1.24 |
Name of the time range, that the ACL rule
has referenced.It must start with alphabet and shall consist of
1 to 31 alphanumeric characters. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
aclRuleTimeRangeStatus |
1.3.6.1.4.1.4413.1.1.3.2.4.1.25 |
Flag that indicates the ACL rule status.
If the status is active, it implies that the ACL rule is in effect.
If the status is inactive, it implies that the ACL rule is not in effect. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inactive(1), active(2) |
|
aclRuleRateLimitCrate |
1.3.6.1.4.1.4413.1.1.3.2.4.1.26 |
Committed rate attribute statement value, specified in kbps. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
aclRuleRateLimitCburst |
1.3.6.1.4.1.4413.1.1.3.2.4.1.27 |
Committed burst size attribute statement value, specified in kbytes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
AclBurstSize |
|
|
aclRuleIcmpType |
1.3.6.1.4.1.4413.1.1.3.2.4.1.29 |
ACL rule matches on the specified ICMP type. All values
from 1 to 255 are valid. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
aclRuleIcmpCode |
1.3.6.1.4.1.4413.1.1.3.2.4.1.30 |
ACL rule matches on the specified ICMP code. All values
from 1 to 255 are valid. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
aclRuleIgmpType |
1.3.6.1.4.1.4413.1.1.3.2.4.1.31 |
ACL rule matches on the specified IGMP type. All values
from 1 to 255 are valid. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
aclRuleEstablished |
1.3.6.1.4.1.4413.1.1.3.2.4.1.32 |
Flag to indicate the ACL rule to match on TCP packets that
has either RST or ACK bits set in the TCP header |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclRuleFragments |
1.3.6.1.4.1.4413.1.1.3.2.4.1.33 |
Flag to indicate the ACL rule to match if the packet is fragmented |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclMacIndexNextFree |
1.3.6.1.4.1.4413.1.1.3.2.5 |
This object contains an unused value for the aclMacIndex
to be used when creating a new MAC ACL. A value of zero
zero indicates the ACL table is full. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclMacTable |
1.3.6.1.4.1.4413.1.1.3.2.6 |
A table of MAC ACL instances. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclMacEntry |
|
aclMacEntry |
1.3.6.1.4.1.4413.1.1.3.2.6.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclMacEntry |
|
|
aclMacIndex |
1.3.6.1.4.1.4413.1.1.3.2.6.1.1 |
The MAC ACL table index this instance is associated with.
When creating a new MAC ACL, refer to the aclMacIndexNextFree
object to determine the next available aclMacIndex to use. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclMacName |
1.3.6.1.4.1.4413.1.1.3.2.6.1.2 |
The name of this MAC ACL entry, which must consist of
1 to 31 alphanumeric characters and uniquely identify
this MAC ACL. An existing MAC ACL can be renamed by
setting this object to a new name.
This object must be set to complete a new MAC ACL
row instance. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
aclMacStatus |
1.3.6.1.4.1.4413.1.1.3.2.6.1.3 |
Status of this instance. ACL MAC entries can not be deleted until all rows in
the aclIfTable and aclRuleTable with corresponding values of aclMacIndex
have been deleted.
active(1) - this ACL instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
The aclMacName object must be set to complete this row instance. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
aclMacRuleTable |
1.3.6.1.4.1.4413.1.1.3.2.7 |
A table of layer 2 MAC ACL Rule instances. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclMacRuleEntry |
|
aclMacRuleEntry |
1.3.6.1.4.1.4413.1.1.3.2.7.1 |
A table of layer 2 MAC ACL Classification Rules |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclMacRuleEntry |
|
|
aclMacRuleIndex |
1.3.6.1.4.1.4413.1.1.3.2.7.1.1 |
The index of this rule instance within an MAC ACL. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclMacRuleAction |
1.3.6.1.4.1.4413.1.1.3.2.7.1.2 |
The type of action this MAC ACL rule should perform. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
permit(1), deny(2) |
|
aclMacRuleCos |
1.3.6.1.4.1.4413.1.1.3.2.7.1.3 |
The Class of Service (COS) used in the MAC ACL Classification.
This is the three-bit user priority field in the 802.1Q tag
header of a tagged Ethernet frame. For frames containing a
double VLAN tag, this field is located in the first/outer tag. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..7 |
|
aclMacRuleCos2 |
1.3.6.1.4.1.4413.1.1.3.2.7.1.4 |
The Secondary Class of Service (COS2) used in the MAC ACL Classification.
This is the three-bit user priority field in the second/inner 802.1Q
tag header of a double VLAN tagged Ethernet frame. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..7 |
|
aclMacRuleDestMacAddr |
1.3.6.1.4.1.4413.1.1.3.2.7.1.5 |
The Destination MAC address used in the MAC ACL Classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
aclMacRuleDestMacMask |
1.3.6.1.4.1.4413.1.1.3.2.7.1.6 |
The Destination MAC address mask used in the MAC ACL Classification.
This mask value identifies the portion of the aclMacRuleDestMacAddr
that is compared against a packet. A non-contiguous mask value is
permitted. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
aclMacRuleEtypeKey |
1.3.6.1.4.1.4413.1.1.3.2.7.1.7 |
The Ethertype keyword used in the MAC ACL Classification.
A keyword of custom(1) requires that the aclMacRuleEtypeValue
object also be set. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
custom(1), appletalk(2), arp(3), ibmsna(4), ipv4(5), ipv6(6), ipx(7), mplsmcast(8), mplsucast(9), netbios(10), novell(11), pppoe(12), rarp(13) |
|
aclMacRuleEtypeValue |
1.3.6.1.4.1.4413.1.1.3.2.7.1.8 |
The Ethertype custom value used in the MAC ACL Classification.
This object is only valid if the aclMacRuleEtypeKey is set to
custom(1). The allowed value for this object is 0x0600 to 0xFFFF
(1536 to 65535). |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
EtypeValue |
|
|
aclMacRuleSrcMacAddr |
1.3.6.1.4.1.4413.1.1.3.2.7.1.9 |
The Source MAC address used in the MAC ACL Classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
aclMacRuleSrcMacMask |
1.3.6.1.4.1.4413.1.1.3.2.7.1.10 |
The Source MAC address mask used in the MAC ACL Classification.
This mask value identifies the portion of the aclMacRuleSrcMacAddr
that is compared against a packet. A non-contiguous mask value is
permitted. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
aclMacRuleVlanId |
1.3.6.1.4.1.4413.1.1.3.2.7.1.11 |
The VLAN ID value used in the MAC ACL Classification.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4093 |
|
aclMacRuleVlanIdRangeStart |
1.3.6.1.4.1.4413.1.1.3.2.7.1.12 |
The VLAN ID range start value used in the MAC ACL Classification.
Setting this value greater than the current aclMacRuleVlanIdRangeEnd
changes the VLAN ID range end to the same value as the range start.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4093 |
|
aclMacRuleVlanIdRangeEnd |
1.3.6.1.4.1.4413.1.1.3.2.7.1.13 |
The VLAN ID range end value used in the MAC ACL Classification.
Setting this value less than the current aclMacRuleVlanIdRangeStart
changes the VLAN ID range start to the same value as the range end.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4093 |
|
aclMacRuleVlanId2 |
1.3.6.1.4.1.4413.1.1.3.2.7.1.14 |
The Secondary VLAN ID value used in the MAC ACL Classification.
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4093 |
|
aclMacRuleVlanId2RangeStart |
1.3.6.1.4.1.4413.1.1.3.2.7.1.15 |
The Secondary VLAN ID range start value used in the MAC ACL Classification.
Setting this value greater than the current aclMacRuleVlanId2RangeEnd
changes the Secondary VLAN ID range end to the same value as the range start.
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4093 |
|
aclMacRuleVlanId2RangeEnd |
1.3.6.1.4.1.4413.1.1.3.2.7.1.16 |
The Secondary VLAN ID range end value used in the MAC ACL Classification.
Setting this value less than the current aclMacRuleVlanId2RangeStart
changes the Secondary VLAN ID range start to the same value as the range end.
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4093 |
|
aclMacRuleStatus |
1.3.6.1.4.1.4413.1.1.3.2.7.1.17 |
Status of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
aclMacRuleAssignQueueId |
1.3.6.1.4.1.4413.1.1.3.2.7.1.18 |
Queue identifier to which all inbound packets matching this
MAC ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the number of assignable queues in the
system:
1-3 queues: 0
4-7 queues: 1
8 queues: 2
This default assignment is static and is not influenced by
other system configuration changes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
aclMacRuleRedirectIntf |
1.3.6.1.4.1.4413.1.1.3.2.7.1.19 |
A non-zero value indicates the external ifIndex to which all
inbound packets matching this MAC ACL rule are directed. A
value of zero means packet redirection is not in effect, which
is the default value of this object. Note that packet
redirection and mirroring (aclMacRuleMirrorIntf object)
are mutually-exclusive rule attributes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
aclMacRuleMatchEvery |
1.3.6.1.4.1.4413.1.1.3.2.7.1.20 |
Flag to indicate that the MAC ACL rule is defined to match all packets,
regardless of Ethertype. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclMacRuleMirrorIntf |
1.3.6.1.4.1.4413.1.1.3.2.7.1.21 |
A non-zero value indicates the external ifIndex to which all
inbound packets matching this MAC ACL rule are copied. A
value of zero means packet mirroring is not in effect, which
is the default value of this object. Note that packet
mirroring and redirection (aclMacRuleRedirectIntf object)
are mutually-exclusive rule attributes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
aclMacRuleLogging |
1.3.6.1.4.1.4413.1.1.3.2.7.1.22 |
Flag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
This object may be supported for an aclMacRuleAction
setting of permit(1) and/or deny(2), depending on the
ACL feature capabilities of the device. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclMacRuleTimeRangeName |
1.3.6.1.4.1.4413.1.1.3.2.7.1.23 |
Name of the time range, that the ACL rule
has referenced.It must start with alphabet and shall consist of
1 to 31 alphanumeric characters. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
aclMacRuleTimeRangeStatus |
1.3.6.1.4.1.4413.1.1.3.2.7.1.24 |
Flag that indicates the ACL rule status.
If the status is active, it implies that the ACL rule is in effect.
If the status is inactive, it implies that the ACL rule is not in effect. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inactive(1), active(2) |
|
aclMacRuleRateLimitCrate |
1.3.6.1.4.1.4413.1.1.3.2.7.1.25 |
Committed rate attribute statement value, specified in kbps. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
aclMacRuleRateLimitCburst |
1.3.6.1.4.1.4413.1.1.3.2.7.1.26 |
Committed burst size attribute statement value, specified in kbytes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
AclBurstSize |
|
|
aclTrapRuleIndex |
1.3.6.1.4.1.4413.1.1.3.2.9.2 |
The index of an ACL rule instance.
Used by aclTrapRuleLogEvent trap. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclTrapRuleAction |
1.3.6.1.4.1.4413.1.1.3.2.9.3 |
The type of action this rule should perform, either
permit(1) or deny(2).
Used by aclTrapRuleLogEvent trap. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
permit(1), deny(2) |
|
aclTrapRuleHitCount |
1.3.6.1.4.1.4413.1.1.3.2.9.4 |
Number of times the ACL rule was hit during the most
recent logging interval. Used by aclTrapRuleLogEvent trap. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
aclTrapFlag |
1.3.6.1.4.1.4413.1.1.3.2.9.5 |
ACL Trap Flag - Enables or disables ACL trap generation.
When this value is set to enable(1), ACL traps are
sent from the switch when they occur. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enable(1), disable(2) |
|
aclTrapRuleTimeRangeName |
1.3.6.1.4.1.4413.1.1.3.2.9.6 |
Name of the time range on which there is a notification received.
Used by aclTrapRuleTimeRangeEvent. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
aclTrapRuleTimeRangeNotification |
1.3.6.1.4.1.4413.1.1.3.2.9.7 |
Flag to indicate the type of time range notification received.
Used by aclTrapRuleTimeRangeEvent. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
activate(1), deactivate(2), delete(3) |
|
aclTrapRuleInstallationStatus |
1.3.6.1.4.1.4413.1.1.3.2.9.8 |
Value specifies the status of the ACL Rule installed in hardware as activated/deactivated.
Used by aclTrapRuleTimeRangeEvent. |
Status: current |
Access: accessible-for-notify |
OBJECT-TYPE |
|
|
|
|
INTEGER |
failure(1), success(2) |
|
aclTrapRuleLogEvent |
1.3.6.1.4.1.4413.1.1.3.2.0.1 |
This trap is generated on a periodic basis to indicate that an
ACL rule configured for logging was actively used by hardware to
take action on one or more packets. The aclTrapRuleHitCount denotes
the number of times this rule was hit during the most recent logging
interval. ACL Trap generation requires that the aclTrapFlag object
be set to enable(1). |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
aclTrapRuleTimeRangeEvent |
1.3.6.1.4.1.4413.1.1.3.2.0.2 |
This trap is generated when there is a time range notification
received on any Time based ACL rule.
The aclTrapRuleTimeRangeName denotes the time range name associated with the ACL Rule,
aclTrapRuleTimeRangeNotification indicates the type of notification received and
aclTrapRuleInstallationStatus indicates the installation status of ACL Rule in hardware.
When activate notification is received ACL rule is activated in the hardware.
When deactivate notifcation is received ACL rule is deactivated in the hardware.
When delete notification is received ACL rule is activated in the hardware, if it is
already not activated. ACL Trap generation requires the aclTrapFlag object be set to enable(1). |
Status: current |
Access: accessible-for-notify |
NOTIFICATION-TYPE |
|
|
|
aclIpv6IndexNextFree |
1.3.6.1.4.1.4413.1.1.3.2.10 |
This object contains an unused value for the aclIPv6Index
to be used when creating a new IPv6 ACL. A value of zero
zero indicates the ACL table is full. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclIpv6Table |
1.3.6.1.4.1.4413.1.1.3.2.11 |
A table of Ipv6 ACL instances. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclIpv6Entry |
|
aclIpv6Entry |
1.3.6.1.4.1.4413.1.1.3.2.11.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclIpv6Entry |
|
|
aclIpv6Index |
1.3.6.1.4.1.4413.1.1.3.2.11.1.1 |
The IPv6 ACL table index this instance is associated with.
When creating a new IPv6 ACL, refer to the aclIPv6IndexNextFree
object to determine the next available aclIpv6Index to use. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclIpv6Name |
1.3.6.1.4.1.4413.1.1.3.2.11.1.2 |
The name of this IPv6 ACL entry, which must consist of
1 to 31 alphanumeric characters and uniquely identify
this IPv6 ACL. An existing IPv6 ACL can be renamed by
setting this object to a new name.
This object must be set to complete a new IPv6 ACL
row instance. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
aclIpv6Status |
1.3.6.1.4.1.4413.1.1.3.2.11.1.3 |
Status of this instance.
active(1) - this ACL instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
The aclMacName object must be set to complete this row instance. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
aclIpv6RuleTable |
1.3.6.1.4.1.4413.1.1.3.2.12 |
A table of IPv6 ACL Rule instances. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclIpv6RuleEntry |
|
aclIpv6RuleEntry |
1.3.6.1.4.1.4413.1.1.3.2.12.1 |
A table of IPv6 ACL Classification Rules |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclIpv6RuleEntry |
|
|
aclIpv6RuleIndex |
1.3.6.1.4.1.4413.1.1.3.2.12.1.1 |
The index of this rule instance within an IPv6 ACL. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclIpv6RuleAction |
1.3.6.1.4.1.4413.1.1.3.2.12.1.2 |
The type of action this IPv6 ACL rule should perform. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
INTEGER |
permit(1), deny(2) |
|
aclIpv6RuleLogging |
1.3.6.1.4.1.4413.1.1.3.2.12.1.3 |
Flag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
This object may be supported for an aclIPv6RuleAction
setting of permit(1) and/or deny(2), depending on the
ACL feature capabilities of the device. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclIpv6RuleAssignQueueId |
1.3.6.1.4.1.4413.1.1.3.2.12.1.4 |
Queue identifier to which all inbound packets matching this
ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the number of assignable queues in the
system:
1-3 queues: 0
4-7 queues: 1
8 queues: 2
This default assignment is static and is not influenced by
other system configuration changes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
aclIpv6RuleRedirectIntf |
1.3.6.1.4.1.4413.1.1.3.2.12.1.5 |
A non-zero value indicates the external ifIndex to which all
inbound packets matching this Ipv6 ACL rule are directed. A
value of zero means packet redirection is not in effect, which
is the default value of this object. Note that packet
redirection and mirroring (aclIpv6RuleMirrorIntf object)
are mutually-exclusive rule attributes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
aclIpv6RuleMirrorIntf |
1.3.6.1.4.1.4413.1.1.3.2.12.1.6 |
A non-zero value indicates the external ifIndex to which all
inbound packets matching this IPv6 ACL rule are copied. A
value of zero means packet mirroring is not in effect, which
is the default value of this object. Note that packet
mirroring and redirection (aclIpv6RuleRedirectIntf object)
are mutually-exclusive rule attributes. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
InterfaceIndexOrZero |
|
|
aclIpv6RuleMatchEvery |
1.3.6.1.4.1.4413.1.1.3.2.12.1.7 |
Flag to indicate that the ACL rule is defined to match on every IP packet,
regardless of content. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclIpv6RuleProtocol |
1.3.6.1.4.1.4413.1.1.3.2.12.1.8 |
icmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
aclIpv6RuleSrcL4Port |
1.3.6.1.4.1.4413.1.1.3.2.12.1.9 |
The Source Port Number (Layer 4) used in the ACL Classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclIpv6RuleDestL4Port |
1.3.6.1.4.1.4413.1.1.3.2.12.1.12 |
The Destination Port (Layer 4) used in ACl classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclIpv6RuleDestL4PortRangeEnd |
1.3.6.1.4.1.4413.1.1.3.2.12.1.14 |
The Destination Port (Layer 4) ending range used in ACL classification. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclIpv6RuleStatus |
1.3.6.1.4.1.4413.1.1.3.2.12.1.15 |
Status of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
aclIpv6RuleFlowLabel |
1.3.6.1.4.1.4413.1.1.3.2.12.1.16 |
Flow label is 20-bit number that is unique to an IPv6 packet, used by end
stations to signify quality-of-service handling in routers. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1048575 |
|
aclIpv6RuleIPDSCP |
1.3.6.1.4.1.4413.1.1.3.2.12.1.17 |
The Differentiated Services Code Point value. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclIpv6RuleTimeRangeName |
1.3.6.1.4.1.4413.1.1.3.2.12.1.22 |
Name of the time range, that the ACL rule
has referenced.It must start with alphabet and shall consist of
1 to 31 alphanumeric characters. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..31) |
|
aclIpv6RuleTimeRangeStatus |
1.3.6.1.4.1.4413.1.1.3.2.12.1.23 |
Flag that indicates the ACL rule status.
If the status is active, it implies that the ACL rule is in effect.
If the status is inactive, it implies that the ACL rule is not in effect. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inactive(1), active(2) |
|
aclIpv6RuleRateLimitCrate |
1.3.6.1.4.1.4413.1.1.3.2.12.1.24 |
Committed rate attribute statement value, specified in kbps. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
aclIpv6RuleIcmpType |
1.3.6.1.4.1.4413.1.1.3.2.12.1.27 |
ACL rule matches on the specified ICMP type. All values
from 1 to 255 are valid. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
aclIpv6RuleIcmpCode |
1.3.6.1.4.1.4413.1.1.3.2.12.1.28 |
ACL rule matches on the specified ICMP code. All values
from 1 to 255 are valid. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
aclIpv6RuleRouting |
1.3.6.1.4.1.4413.1.1.3.2.12.1.29 |
Flag to indicate the ACL rule to match on packets
with routing extention header |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclIpv6RuleFragments |
1.3.6.1.4.1.4413.1.1.3.2.12.1.30 |
Flag to indicate the ACL rule to match if the packets
with fragments extention header |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclIpv6RuleEstablished |
1.3.6.1.4.1.4413.1.1.3.2.12.1.31 |
Flag to indicate the ACL rule to match on TCP packets that
has either RST or ACK bits set in the TCP header |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
aclVlanTable |
1.3.6.1.4.1.4413.1.1.3.2.13 |
A table of ACL VLAN instances per direction. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclVlanEntry |
|
aclVlanEntry |
1.3.6.1.4.1.4413.1.1.3.2.13.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclVlanEntry |
|
|
aclVlanIndex |
1.3.6.1.4.1.4413.1.1.3.2.13.1.1 |
The Vlan to which this ACL instance applies. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclVlanDirection |
1.3.6.1.4.1.4413.1.1.3.2.13.1.2 |
The Vlan direction to which this ACL instance applies. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
inbound(1), outbound(2) |
|
aclVlanSequence |
1.3.6.1.4.1.4413.1.1.3.2.13.1.3 |
The relative evaluation sequence of this ACL for this
Vlan and direction. When multiple ACLs are allowed
for a given Vlan and direction, the sequence number
determines the order in which the list of ACLs are evaluated,
with lower sequence numbers given higher precedence. The
sequence number value is arbitrary, but must be a unique
non-zero value for a given Vlan and direction.
Setting this object to an existing sequence number
value for a given Vlan and direction causes the
ACL corresponding to that value to be replaced with
this ACL. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4294967295 |
|
aclVlanAclType |
1.3.6.1.4.1.4413.1.1.3.2.13.1.4 |
The type of this ACL, which is used to interpret the
aclVlanId object value. Each type of ACL uses its own
numbering scheme for identification (see aclVlanAclId object
for details).
The aclVlanAclId object must be specified along with this
object. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ip(1), mac(2), ipv6(3) |
|
aclVlanAclId |
1.3.6.1.4.1.4413.1.1.3.2.13.1.5 |
The ACL identifier value, which is interpreted based on
the aclVlanType object.
For the IP ACLs, the actual ACL number is its identifier
as follows: IP standard ranges from 1-99, while
IP extended ranges from 100-199. Here, aclVlanAclId represents
aclIndex.
The MAC ACLs use an internally-generated index value
that is assigned when the ACL is created. Here, aclVlanAclId
represents aclMacIndex.
The IPv6 ACLs use an internally-generated index value
that is assigned when the ACL is created.Here, aclVlanAclId
represents aclIpv6Index.
The aclVlanType object must be specified along with
this object. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..2147483647 |
|
aclVlanStatus |
1.3.6.1.4.1.4413.1.1.3.2.13.1.6 |
Status of this instance.
active(1) - this ACL Vlan instance is active
createAndGo(4) - set to this value to assign an ACL to a Vlan and direction
destroy(6) - set to this value to remove an ACL from a Vlan and direction |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|