EXTREME-VLAN-MIB

File: EXTREME-VLAN-MIB.mib (70301 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	RFC1213-MIB
EXTREME-BASE-MIB	EXTREME-SYSTEM-MIB

Imported symbols

MODULE-IDENTITY	RowStatus	TruthValue
DisplayString	OBJECT-TYPE	Integer32
IpAddress	extremeAgent	PortList
extremeSlotNumber	Counter64

Defined Types

ExtremeVlanType
INTEGER	vlanLayer2(1)

ExtremeVlanEncapsType
INTEGER	vlanEncaps8021q(1), vlanEncapsNone(2)

ExtremeVlanGlobalMappingEntry
SEQUENCE
	extremeVlanGlobalMappingIdentifier	INTEGER
	extremeVlanGlobalMappingIfIndex	Integer32

ExtremeVlanIfEntry
SEQUENCE
	extremeVlanIfIndex	Integer32
	extremeVlanIfDescr	DisplayString
	extremeVlanIfType	ExtremeVlanType
	extremeVlanIfGlobalIdentifier	INTEGER
	extremeVlanIfStatus	RowStatus
	extremeVlanIfIgnoreStpFlag	TruthValue
	extremeVlanIfIgnoreBpduFlag	TruthValue
	extremeVlanIfLoopbackModeFlag	TruthValue
	extremeVlanIfVlanId	Integer32
	extremeVlanIfEncapsType	ExtremeVlanEncapsType
	extremeVlanIfAdminStatus	TruthValue

ExtremeVlanEncapsIfEntry
SEQUENCE
	extremeVlanEncapsIfIndex	Integer32
	extremeVlanEncapsIfType	ExtremeVlanEncapsType
	extremeVlanEncapsIfTag	Integer32
	extremeVlanEncapsIfStatus	RowStatus

ExtremeVlanIpEntry
SEQUENCE
	extremeVlanIpNetAddress	IpAddress
	extremeVlanIpNetMask	IpAddress
	extremeVlanIpStatus	RowStatus
	extremeVlanIpForwardingState	TruthValue

ExtremeVlanProtocolEntry
SEQUENCE
	extremeVlanProtocolIndex	INTEGER
	extremeVlanProtocolIdIndex	INTEGER
	extremeVlanProtocolName	DisplayString
	extremeVlanProtocolDllEncapsType	INTEGER
	extremeVlanProtocolId	INTEGER
	extremeVlanProtocolStatus	RowStatus

ExtremeVlanProtocolVlanEntry
SEQUENCE
	extremeVlanProtocolVlanIfIndex	Integer32
	extremeVlanProtocolVlanProtocolIndex	Integer32
	extremeVlanProtocolVlanStatus	RowStatus

ExtremeVlanProtocolDefEntry
SEQUENCE
	extremeVlanProtocolDefName	DisplayString
	extremeVlanProtocolDefDllEncapsType	INTEGER
	extremeVlanProtocolDefValue	INTEGER
	extremeVlanProtocolDefStatus	RowStatus

ExtremeVlanProtocolBindingEntry
SEQUENCE
	extremeVlanProtocolBindingIfIndex	Integer32
	extremeVlanProtocolBindingName	DisplayString
	extremeVlanProtocolBindingStatus	RowStatus

ExtremeVlanOpaqueEntry
SEQUENCE
	extremeVlanOpaqueTaggedPorts	PortList
	extremeVlanOpaqueUntaggedPorts	PortList

ExtremeVlanOpaqueControlEntry
SEQUENCE
	extremeVlanOpaqueControlPorts	PortList
	extremeVlanOpaqueControlOperation	INTEGER
	extremeVlanOpaqueControlStatus	RowStatus

ExtremeVlanStackEntry
SEQUENCE
	extremeVlanStackHigherLayer	Integer32
	extremeVlanStackLowerLayer	Integer32

ExtremeVlanL2StatsEntry
SEQUENCE
	extremeVlanL2StatsIfDescr	DisplayString
	extremeVlanL2StatsPktsToCpu	Counter64
	extremeVlanL2StatsPktsLearnt	Counter64
	extremeVlanL2StatsIgmpCtrlPktsSnooped	Counter64
	extremeVlanL2StatsIgmpDataPktsSwitched	Counter64

ExtremeVlanAggregationEntry
SEQUENCE
	extremeVlanAggregationSuperVlanIfIndex	Integer32
	extremeVlanAggregationSubVlanIfIndex	Integer32
	extremeVlanAggregationSubVlanStartIpNetAddress	IpAddress
	extremeVlanAggregationSubVlanStartIpNetMask	IpAddress
	extremeVlanAggregationSubVlanEndIpNetAddress	IpAddress
	extremeVlanAggregationSubVlanEndIpNetMask	IpAddress
	extremeVlanAggregationStatus	RowStatus

ExtremeVlanAggregationConfigEntry
SEQUENCE
	extremeVlanAggregationConfigSuperVlanIfIndex	Integer32
	extremeVlanAggregationConfigSubVlanProxyEnable	TruthValue

ExtremeVlanTranslationEntry
SEQUENCE
	extremeVlanTranslationSuperVlanIfIndex	Integer32
	extremeVlanTranslationMemberVlanIfIndex	Integer32
	extremeVlanTranslationStatus	RowStatus

ExtremePortVlanStatsEntry
SEQUENCE
	extremeStatsPortIfIndex	Integer32
	extremeStatsVlanNameIndex	DisplayString
	extremePortVlanStatsCntrType	Integer32
	extremePortVlanUnicastReceivedPacketsCounter	Counter64
	extremePortVlanMulticastReceivedPacketsCounter	Counter64
	extremePortVlanBroadcastReceivedPacketsCounter	Counter64
	extremePortVlanTotalReceivedBytesCounter	Counter64
	extremePortVlanTotalReceivedFramesCounter	Counter64
	extremePortVlanUnicastTransmittedPacketsCounter	Counter64
	extremePortVlanMulticastTransmittedPacketsCounter	Counter64
	extremePortVlanBroadcastTransmittedPacketsCounter	Counter64
	extremePortVlanTotalTransmittedBytesCounter	Counter64
	extremePortVlanTotalTransmittedFramesCounter	Counter64
	extremePortConfigureVlanStatus	RowStatus

Defined Values

extremeVlan		1.3.6.1.4.1.1916.1.2
Extreme Virtual LAN objects
MODULE-IDENTITY

extremeVlanGroup		1.3.6.1.4.1.1916.1.2.1
OBJECT IDENTIFIER

extremeVirtualGroup		1.3.6.1.4.1.1916.1.2.2
OBJECT IDENTIFIER

extremeEncapsulationGroup		1.3.6.1.4.1.1916.1.2.3
OBJECT IDENTIFIER

extremeVlanIpGroup		1.3.6.1.4.1.1916.1.2.4
OBJECT IDENTIFIER

extremeProtocolGroup		1.3.6.1.4.1.1916.1.2.5
OBJECT IDENTIFIER

extremeVlanOpaqueGroup		1.3.6.1.4.1.1916.1.2.6
OBJECT IDENTIFIER

extremeVlanStackGroup		1.3.6.1.4.1.1916.1.2.7
OBJECT IDENTIFIER

extremeVlanStatsGroup		1.3.6.1.4.1.1916.1.2.8
OBJECT IDENTIFIER

extremeVlanAggregationGroup		1.3.6.1.4.1.1916.1.2.9
OBJECT IDENTIFIER

extremeVlanTranslationGroup		1.3.6.1.4.1.1916.1.2.10
OBJECT IDENTIFIER

extremeVlanGlobalMappingTable		1.3.6.1.4.1.1916.1.2.1.1
This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a global identifier.
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanGlobalMappingEntry

extremeVlanGlobalMappingEntry		1.3.6.1.4.1.1916.1.2.1.1.1
An individual VLAN interface global mapping entry. Entries in this table are created by setting the extremeVlanIfGlobalIdentifier object in the extremeVlanIfTable to a non-zero value.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanGlobalMappingEntry

extremeVlanGlobalMappingIdentifier		1.3.6.1.4.1.1916.1.2.1.1.1.1
An index into the extremeVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN interface. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

extremeVlanGlobalMappingIfIndex		1.3.6.1.4.1.1916.1.2.1.1.1.2
The value of extremeVlanIfIndex for the VLAN interface in the extremeVlanIfTable, which is bound to the global identifier specified by this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanIfTable		1.3.6.1.4.1.1916.1.2.1.2
This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be created, destroyed and/or mapped to a globally identified vlan.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanIfEntry

extremeVlanIfEntry		1.3.6.1.4.1.1916.1.2.1.2.1
An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanIfEntry

extremeVlanIfIndex		1.3.6.1.4.1.1916.1.2.1.2.1.1
The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

extremeVlanIfDescr		1.3.6.1.4.1.1916.1.2.1.2.1.2
This is a description of the VLAN interface.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

extremeVlanIfType		1.3.6.1.4.1.1916.1.2.1.2.1.3
The VLAN interface type.
Status: current	Access: read-create
OBJECT-TYPE
	ExtremeVlanType

extremeVlanIfGlobalIdentifier		1.3.6.1.4.1.1916.1.2.1.2.1.4
An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. The binding between a global identifier and a VLAN interface can be created or removed. To create a binding an NMS must write a non-zero value to this object. To delete a binding, the NMS must write a zero to this object. The value 1 is reserved for the default VLAN and this cannot be deleted or re-assigned.
Status: deprecated	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

extremeVlanIfStatus		1.3.6.1.4.1.1916.1.2.1.2.1.6
The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to createAndWait(5) causes a row in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptable to the agent; otherwise, the agent sets the status to notReady(3). Setting this object to active(1) is only valid when the current status is active(1) or notInService(2). When the state of the row transitions is set to active(1), the agent creates the corresponding row in the ifTable. Setting this object to destroy(6) will remove the corresponding VLAN interface, remove the entry in this table, and the corresponding entries in the extremeVlanGlobalMappingTable and the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any stacking dependencies in the ifStackTable and any protocol specific tables dependencies.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

extremeVlanIfIgnoreStpFlag		1.3.6.1.4.1.1916.1.2.1.2.1.7
Enable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, the Default value is FALSE, which means that the VLAN uses STP port information
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

extremeVlanIfIgnoreBpduFlag		1.3.6.1.4.1.1916.1.2.1.2.1.8
Setting this object to true causes this VLAN's BPDU's to be ignored by the Spanning Tree process. This can be used to keep the root bridge within one's own network when external switches also fall within the same Spanning Tree Domain. When a vlan is first created, the Default value is FALSE.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

extremeVlanIfLoopbackModeFlag		1.3.6.1.4.1.1916.1.2.1.2.1.9
Setting this object to true causes loopback mode to be enabled on this VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

extremeVlanIfVlanId		1.3.6.1.4.1.1916.1.2.1.2.1.10
The VLAN ID of this VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..4095

extremeVlanIfEncapsType		1.3.6.1.4.1.1916.1.2.1.2.1.11
The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
Status: current	Access: read-create
OBJECT-TYPE
	ExtremeVlanEncapsType

extremeVlanIfAdminStatus		1.3.6.1.4.1.1916.1.2.1.2.1.12
Enable/disable this VLAN interface. Setting this object to true will administratively enable this VLAN.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

extremeVlanEncapsIfTable		1.3.6.1.4.1.1916.1.2.3.1
This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the system. A VLAN encapsulation interface may be created or destroyed.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanEncapsIfEntry

extremeVlanEncapsIfEntry		1.3.6.1.4.1.1916.1.2.3.1.1
An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanEncapsIfEntry

extremeVlanEncapsIfIndex		1.3.6.1.4.1.1916.1.2.3.1.1.1
The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the extremeNextAvailableVirtIfIndex object.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

extremeVlanEncapsIfType		1.3.6.1.4.1.1916.1.2.3.1.1.2
The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
Status: current	Access: read-create
OBJECT-TYPE
	ExtremeVlanEncapsType

extremeVlanEncapsIfTag		1.3.6.1.4.1.1916.1.2.3.1.1.3
The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

extremeVlanEncapsIfStatus		1.3.6.1.4.1.1916.1.2.3.1.1.4
The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notReady(3). In order for a row to become active, the NMS must set extremeVlanEncapsIfTagType and extremeVlanEncapsIfTag to some valid and consistent values. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row, the agent will create the row and change the status to active(1). If any of the necessary objects are not available, or specify an invalid configuration, the row will not be created and the agent will return an appropriate error. Setting this object to createAndWait(5) causes a row in in this table to be created. If all necessary objects in the row have been assigned values and specify a valid configuration, the status of the row will be set to notInService(2); otherwise, the status will be set to notReady(3). This object may only be set to createAndGo(4) or createAndWait(5) if it does not exist. Setting this object to active(1) when the status is notInService(2) causes the agent to commit the row. Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to destroy(6) will remove the corresponding VLAN encapsulation interface, remove the entry in this table, and remove the corresponding entry in the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any references to this interface in the ifStackTable.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

extremeNextAvailableVirtIfIndex		1.3.6.1.4.1.1916.1.2.2.1
The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The current value of this object is changed to a new value when the current value is written to an agent's table, that is indexed by ifIndex. Row creation using the current value of this object, allocates a virtual ifIndex. Note the following: 1. A newly created row does not have to be active(1) for the agent to allocate the virtual ifIndex. 2. Race conditions between multiple NMS's end when a row is created. Rows are deemed created when a setRequest is successfully committed (i.e. the errorStats is noError(0)). 3. An agent that exhausts its supply of virual ifIndex values returns zero as the value of this object. This can be used by an NMS as an indication to deleted unused rows and reboot the device.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanIpTable		1.3.6.1.4.1.1916.1.2.4.1
A list of IP VLAN interface information entries. Entries in this table are related to entries in the extremeVlanIfTable by using the same index.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanIpEntry

extremeVlanIpEntry		1.3.6.1.4.1.1916.1.2.4.1.1
A extremeVlanIpEntry contains layer 3 information about a particular IP VLAN interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanIpEntry

extremeVlanIpNetAddress		1.3.6.1.4.1.1916.1.2.4.1.1.1
The IP network number for the IP VLAN interface defined in the extremeVlanIfTable identified with the same index.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

extremeVlanIpNetMask		1.3.6.1.4.1.1916.1.2.4.1.1.2
The IP network mask corresponding to the IP Network address defined by extremeVlanIpIpNetAddress.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

extremeVlanIpStatus		1.3.6.1.4.1.1916.1.2.4.1.1.3
The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to active(1) or createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the row creation request. Setting this object to createAndWait(5) is not supported. When the status changes to active(1), the agent applies the IP parmeters to the IP VLAN interface identified by the corresponding value of the extremeVlanIpIndex object. Setting this object to destroy(6) will remove the IP parmeters from the IP VLAN interface and remove the entry from this table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

extremeVlanIpForwardingState		1.3.6.1.4.1.1916.1.2.4.1.1.4
Indicates whether the IP Forwarding on this Vlan is Enable or not. A true value indicates that the Vlan is Enable.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

extremeVlanProtocolTable		1.3.6.1.4.1.1916.1.2.5.1
Table of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same extremeVlanProtocolIndex. A given protocol ID may appear in the definition of just one protocol definition. This table will typically contain some default entries for popular protocols chosen by ExtremeWare.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanProtocolEntry

extremeVlanProtocolEntry		1.3.6.1.4.1.1916.1.2.5.1.1
One member protocol ID of a protocol definition.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanProtocolEntry

extremeVlanProtocolIndex		1.3.6.1.4.1.1916.1.2.5.1.1.1
An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare and 16 in EXOS). 0 is used for internal purposes.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

extremeVlanProtocolIdIndex		1.3.6.1.4.1.1916.1.2.5.1.1.2
An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per extremeVlanProtocolIndex (up to 6 in ExtremeWare). 0 is used for internal purposes.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..6

extremeVlanProtocolName		1.3.6.1.4.1.1916.1.2.5.1.1.3
A human-readable string representing this protocol. This string should be the same for all entries sharing a given extremeVlanProtocolIndex. A ExtremeVlanProtocolEntry with extremeVlanProtocolName of ANY represents a match on all protocols: this entry may not be modified.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..31)

extremeVlanProtocolDllEncapsType		1.3.6.1.4.1.1916.1.2.5.1.1.4
Represents the type of data-link encapsulation in which the extremeVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	any(1), ethertype(2), llc(3), llcSnapEthertype(4), none(5)

extremeVlanProtocolId		1.3.6.1.4.1.1916.1.2.5.1.1.5
The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value is not valid for extremeVlanProtocolDllEncapsType values of any(1) or none(5).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

extremeVlanProtocolStatus		1.3.6.1.4.1.1916.1.2.5.1.1.6
The row status variable, used according to row installation and removal conventions.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

extremeVlanProtocolVlanTable		1.3.6.1.4.1.1916.1.2.5.2
Table to apply one of the protocol definitions in extremeVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited number of protocols may be applied simultaneously in one device (up to 8 in ExtremeWare).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanProtocolVlanEntry

extremeVlanProtocolVlanEntry		1.3.6.1.4.1.1916.1.2.5.2.1
A mapping of untagged packets of one protocol onto a particular VLAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanProtocolVlanEntry

extremeVlanProtocolVlanIfIndex		1.3.6.1.4.1.1916.1.2.5.2.1.1
The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

extremeVlanProtocolVlanProtocolIndex		1.3.6.1.4.1.1916.1.2.5.2.1.2
An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare).
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

extremeVlanProtocolVlanStatus		1.3.6.1.4.1.1916.1.2.5.2.1.3
The row status variable, used according to row installation and removal conventions.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

extremeVlanProtocolDefTable		1.3.6.1.4.1.1916.1.2.5.3
Table of defined combinations of protocols and DLLEncaps type. This table will typically contain some default entries for popular protocols chosen by ExtremeWare.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanProtocolDefEntry

extremeVlanProtocolDefEntry		1.3.6.1.4.1.1916.1.2.5.3.1
One member representing combination of protocol and DLLEncaps Type.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanProtocolDefEntry

extremeVlanProtocolDefName		1.3.6.1.4.1.1916.1.2.5.3.1.1
A human-readable string representing this protocol. A ExtremeVlanProtocolEntry with extremeVlanProtocol2Name of ANY represents a match on all protocols: this entry may not be modified.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(0..31)

extremeVlanProtocolDefDllEncapsType		1.3.6.1.4.1.1916.1.2.5.3.1.2
Represents the type of data-link encapsulation in which the protocol designated by extremeVlanProtocolDefName is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	any(1), ethertype(2), llc(3), llcSnapEthertype(4), none(5)

extremeVlanProtocolDefValue		1.3.6.1.4.1.1916.1.2.5.3.1.3
The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value is not valid for extremeVlanProtocolDefDllEncapsType values of any(1) or none(5).
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..65535

extremeVlanProtocolDefStatus		1.3.6.1.4.1.1916.1.2.5.3.1.4
The row status variable, used according to row installation and removal conventions.
Status: current	Access: read-only
OBJECT-TYPE
	RowStatus

extremeVlanProtocolBindingTable		1.3.6.1.4.1.1916.1.2.5.4
Table to apply one of the protocol definitions in extremeVlanProtocolDefTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited number of protocols may be applied simultaneously in one device (up to 8 in ExtremeWare).
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanProtocolBindingEntry

extremeVlanProtocolBindingEntry		1.3.6.1.4.1.1916.1.2.5.4.1
A mapping of untagged packets of one protocol onto a particular VLAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanProtocolBindingEntry

extremeVlanProtocolBindingIfIndex		1.3.6.1.4.1.1916.1.2.5.4.1.1
The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

extremeVlanProtocolBindingName		1.3.6.1.4.1.1916.1.2.5.4.1.2
A human-readable string representing this protocol. A ExtremeVlanProtocolBindingEntry with extremeVlanProtocolBindingName of ANY represents a match on all protocols: this entry may not be modified.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..31)

extremeVlanProtocolBindingStatus		1.3.6.1.4.1.1916.1.2.5.4.1.3
The row status variable, used according to row installation and removal conventions.
Status: current	Access: read-only
OBJECT-TYPE
	RowStatus

extremeVlanOpaqueTable		1.3.6.1.4.1.1916.1.2.6.1
This table lists the ports associated with each VLAN interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanOpaqueEntry

extremeVlanOpaqueEntry		1.3.6.1.4.1.1916.1.2.6.1.1
This represents the tagged and untagged ports on each slot per vlan.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanOpaqueEntry

extremeVlanOpaqueTaggedPorts		1.3.6.1.4.1.1916.1.2.6.1.1.1
Each bit in the octet string represents one port. A 1 means that the port is a tagged port in that vlan. The bit value for a port is 0 otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	PortList

extremeVlanOpaqueUntaggedPorts		1.3.6.1.4.1.1916.1.2.6.1.1.2
Each bit in the octet string represents one port. A 1 means that the port is an untagged port in that vlan. The bit value for a port is 0 otherwise.
Status: current	Access: read-only
OBJECT-TYPE
	PortList

extremeVlanOpaqueControlTable		1.3.6.1.4.1.1916.1.2.6.2
This table is used to configure the ports associated with each VLAN interface. The table is used to add/delete ports on a vlan. The table is transitional in nature and SNMP read operations must not be performed on it. Use extremeVlanOpaqueTable for reading the port membership association with vlans
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanOpaqueControlEntry

extremeVlanOpaqueControlEntry		1.3.6.1.4.1.1916.1.2.6.2.1
This represents a control table entry (command) to configure the tagged and untagged ports on each slot per vlan. The first index of the entry is the ifIndex of the VLAN and second index is the slot number of the ports. When adding untagged ports to a VLAN, those ports maybe not be untagged ports for another VLAN (assuming both VLANs use the ANY protocol filter). Such ports must first be deleted from the other VLAN(s) or an error will occur. The operation will succeed or fail in its entirety, no partial results on some of the ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanOpaqueControlEntry

extremeVlanOpaqueControlPorts		1.3.6.1.4.1.1916.1.2.6.2.1.1
The octet string representing a list of ports in bitwise form.
Status: current	Access: read-create
OBJECT-TYPE
	PortList

extremeVlanOpaqueControlOperation		1.3.6.1.4.1.1916.1.2.6.2.1.2
The operation code for this entry. addTagged(1) = Ports referred to in the extremeVlanOpaqueControlPorts variable are added as tagged ports to the VLAN indicated by the index. The ports belong to the slot number as indicated by the second index of the variable. addUntagged(2) = Ports referred to in the extremeVlanOpaqueControlPorts variable are added as tagged ports to the VLAN indicated by the index. The ports belong to the slot number as indicated by the second index of the variable. delete(3) = Ports referred to in the extremeVlanOpaqueControlPorts variable are removed from the VLAN indicated by the index. The ports belong to the slot number as indicated by the second index of the variable.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	addTagged(1), addUntagged(2), delete(3)

extremeVlanOpaqueControlStatus		1.3.6.1.4.1.1916.1.2.6.2.1.3
The status of this entry as per standard RowStatus conventions. Note however, that only the CreateAndGo state is supported.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

extremeVlanStackTable		1.3.6.1.4.1.1916.1.2.7.1
Represents those components of the ifStackTable that do not contain a Physical interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanStackEntry

extremeVlanStackEntry		1.3.6.1.4.1.1916.1.2.7.1.1
Each entry in this read-only table defines which interfaces are on top of which one. All information in the table is also contained in ifStackTable. The Physical interfaces in the ifStackTable are not represented here.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanStackEntry

extremeVlanStackHigherLayer		1.3.6.1.4.1.1916.1.2.7.1.1.1
The higher layer in the logical vlan hierarchy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanStackLowerLayer		1.3.6.1.4.1.1916.1.2.7.1.1.2
The lower layer in the logical vlan hierarchy.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanL2StatsTable		1.3.6.1.4.1.1916.1.2.8.1
This tables contains per-VLAN layer 2 statistics information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanL2StatsEntry

extremeVlanL2StatsEntry		1.3.6.1.4.1.1916.1.2.8.1.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanL2StatsEntry

extremeVlanL2StatsIfDescr		1.3.6.1.4.1.1916.1.2.8.1.1.1
This is a description(name) of the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

extremeVlanL2StatsPktsToCpu		1.3.6.1.4.1.1916.1.2.8.1.1.2
The total number of packets of this VLAN sent to the CPU.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremeVlanL2StatsPktsLearnt		1.3.6.1.4.1.1916.1.2.8.1.1.3
The total number of packets learnt on this VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremeVlanL2StatsIgmpCtrlPktsSnooped		1.3.6.1.4.1.1916.1.2.8.1.1.4
The total number of IGMP control packets snooped on this VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremeVlanL2StatsIgmpDataPktsSwitched		1.3.6.1.4.1.1916.1.2.8.1.1.5
The total number of IGMP data packets switched on this VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremeVlanAggregationTable		1.3.6.1.4.1.1916.1.2.9.1
This table contains the VLAN aggregation information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanAggregationEntry

extremeVlanAggregationEntry		1.3.6.1.4.1.1916.1.2.9.1.1
Information about the individual VLAN aggregation entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanAggregationEntry

extremeVlanAggregationSuperVlanIfIndex		1.3.6.1.4.1.1916.1.2.9.1.1.1
The Super Vlan index for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanAggregationSubVlanIfIndex		1.3.6.1.4.1.1916.1.2.9.1.1.2
The Sub Vlan index for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanAggregationSubVlanStartIpNetAddress		1.3.6.1.4.1.1916.1.2.9.1.1.3
This represents the start network address of the IP range.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

extremeVlanAggregationSubVlanStartIpNetMask		1.3.6.1.4.1.1916.1.2.9.1.1.4
This represents the start network address mask of the IP range
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

extremeVlanAggregationSubVlanEndIpNetAddress		1.3.6.1.4.1.1916.1.2.9.1.1.5
This represents the end network address of the IP range.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

extremeVlanAggregationSubVlanEndIpNetMask		1.3.6.1.4.1.1916.1.2.9.1.1.6
This represents the end network address mask of the IP range.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

extremeVlanAggregationStatus		1.3.6.1.4.1.1916.1.2.9.1.1.7
The status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

extremeVlanAggregationConfigTable		1.3.6.1.4.1.1916.1.2.9.2
This table contains the sub VLAN proxy setting information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanAggregationConfigEntry

extremeVlanAggregationConfigEntry		1.3.6.1.4.1.1916.1.2.9.2.1
Information about the individual VLAN aggregation entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanAggregationConfigEntry

extremeVlanAggregationConfigSuperVlanIfIndex		1.3.6.1.4.1.1916.1.2.9.2.1.1
The Super Vlan index for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanAggregationConfigSubVlanProxyEnable		1.3.6.1.4.1.1916.1.2.9.2.1.2
The boolean flag that prevents normal communication between sub vlans.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

extremeVlanTranslationTable		1.3.6.1.4.1.1916.1.2.10.1
This table contains the VLAN translation information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremeVlanTranslationEntry

extremeVlanTranslationEntry		1.3.6.1.4.1.1916.1.2.10.1.1
Information about the individual VLAN translation entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremeVlanTranslationEntry

extremeVlanTranslationSuperVlanIfIndex		1.3.6.1.4.1.1916.1.2.10.1.1.1
The Super Vlan index for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanTranslationMemberVlanIfIndex		1.3.6.1.4.1.1916.1.2.10.1.1.2
The member Vlan index for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeVlanTranslationStatus		1.3.6.1.4.1.1916.1.2.10.1.1.3
The status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

extremePortVlanStatsTable		1.3.6.1.4.1.1916.1.2.8.2
Vlan statistics per port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ExtremePortVlanStatsEntry

extremePortVlanStatsEntry		1.3.6.1.4.1.1916.1.2.8.2.1
Vlan port statistics Entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ExtremePortVlanStatsEntry

extremeStatsPortIfIndex		1.3.6.1.4.1.1916.1.2.8.2.1.1
The index of this table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremeStatsVlanNameIndex		1.3.6.1.4.1.1916.1.2.8.2.1.2
The index of this table.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

extremePortVlanStatsCntrType		1.3.6.1.4.1.1916.1.2.8.2.1.3
The flag to decide what fields to display, basic or extended. Currently, it is read-only and will reflect whatever has been set for the switch through the cli.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

extremePortVlanUnicastReceivedPacketsCounter		1.3.6.1.4.1.1916.1.2.8.2.1.4
The number of Unicast packets received by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanMulticastReceivedPacketsCounter		1.3.6.1.4.1.1916.1.2.8.2.1.5
The number of Multicast packets received by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanBroadcastReceivedPacketsCounter		1.3.6.1.4.1.1916.1.2.8.2.1.6
The number of Broadcast packets received by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanTotalReceivedBytesCounter		1.3.6.1.4.1.1916.1.2.8.2.1.7
The total number of bytes received by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanTotalReceivedFramesCounter		1.3.6.1.4.1.1916.1.2.8.2.1.8
The total number of frames received by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanUnicastTransmittedPacketsCounter		1.3.6.1.4.1.1916.1.2.8.2.1.9
The number of Unicast packets transmitted by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanMulticastTransmittedPacketsCounter		1.3.6.1.4.1.1916.1.2.8.2.1.10
The number of Multicast packets transmitted by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanBroadcastTransmittedPacketsCounter		1.3.6.1.4.1.1916.1.2.8.2.1.11
The number of Broadcast packets transmitted by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanTotalTransmittedBytesCounter		1.3.6.1.4.1.1916.1.2.8.2.1.12
The total number of bytes transmitted by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortVlanTotalTransmittedFramesCounter		1.3.6.1.4.1.1916.1.2.8.2.1.13
The total number of frames transmitted by a port for a particular VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

extremePortConfigureVlanStatus		1.3.6.1.4.1.1916.1.2.8.2.1.14
The row status variable, used according to row installation and removal conventions.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor