EXPERTV2-MIB

File: EXPERTV2-MIB.mib (110668 bytes)

Imported modules

RFC1155-SMI RFC-1215 SNMPv2-TC

Imported symbols

enterprises IpAddress Counter
OBJECT-TYPE TRAP-TYPE DisplayString
DateAndTime

Defined Types

DisplayString  
OCTET STRING    

HWRowStatus  
INTEGER valid(1), invalid(2), create(3)    

SlotBoardEntry  
SEQUENCE    
  slotBoardSlotNo INTEGER
  slotBoardType INTEGER
  slotBoardNo INTEGER
  slotBoardStatus INTEGER
  slotBoardTime DateAndTime
  slotBoardPCBVersion DisplayString
  slotBoardBIOSVersion DisplayString
  slotBoardSoftwareVersion DisplayString
  slotBoardLogicVersion DisplayString
  slotBoardDSPVersion DisplayString
  slotBoardOtherVersion DisplayString
  slotBoardCPURatio INTEGER
  slotBoardCPUStatus INTEGER
  slotBoardMemorySize INTEGER
  slotBoardUsableMemory INTEGER

BoardResetInfoEntry  
SEQUENCE    
  boardResetInfoSlotNo INTEGER
  boardResetInfoReason INTEGER
  boardResetInfoTime DateAndTime

E1InfoEntry  
SEQUENCE    
  e1InfoSlotNo INTEGER
  e1InfoE1NoInBoard INTEGER
  e1InfoE1No INTEGER
  e1InfoE1Type INTEGER
  e1InfoE1Status INTEGER
  e1InfoE1LoopBackStatus INTEGER
  e1InfoE1PCMPara INTEGER

MfcInfoEntry  
SEQUENCE    
  mfcInfoMfcNo INTEGER
  mfcInfoMfcStatus INTEGER

UserStatisticsDevEntry  
SEQUENCE    
  userStatisticsDevIndex INTEGER
  userStatisticsDevISDN INTEGER
  userStatisticsDevMODEM INTEGER
  userStatisticsDevNormal INTEGER
  userStatisticsDevVPN INTEGER
  userStatisticsDevMP INTEGER
  userStatisticsDevRLogin INTEGER
  userStatisticsDevCallback INTEGER
  userStatisticsDevV110 INTEGER
  userStatisticsDevV120 INTEGER

UserStatisticsBoardEntry  
SEQUENCE    
  userStatisticsBoardSlotNo INTEGER
  userStatisticsBoardISDN INTEGER
  userStatisticsBoardMODEM INTEGER
  userStatisticsBoardNormal INTEGER
  userStatisticsBoardVPN INTEGER
  userStatisticsBoardMP INTEGER
  userStatisticsBoardRLogin INTEGER
  userStatisticsBoardCallback INTEGER
  userStatisticsBoardV110 INTEGER
  userStatisticsBoardV120 INTEGER

UserStatisticsE1Entry  
SEQUENCE    
  userStatisticsE1SlotNo INTEGER
  userStatisticsE1PortNo INTEGER
  userStatisticsE1ISDN INTEGER
  userStatisticsE1MODEM INTEGER
  userStatisticsE1Normal INTEGER
  userStatisticsE1VPN INTEGER
  userStatisticsE1MP INTEGER
  userStatisticsE1RLogin INTEGER
  userStatisticsE1Callback INTEGER
  userStatisticsE1V110 INTEGER
  userStatisticsE1V120 INTEGER

UserStatisticsAccCodeEntry  
SEQUENCE    
  userStatisticsAccCodeIndex OCTET STRING
  userStatisticsAccCodeISDN INTEGER
  userStatisticsAccCodeMODEM INTEGER
  userStatisticsAccCodeNormal INTEGER
  userStatisticsAccCodeVPN INTEGER
  userStatisticsAccCodeMP INTEGER
  userStatisticsAccCodeRLogin INTEGER
  userStatisticsAccCodeCallback INTEGER
  userStatisticsAccCodeV110 INTEGER
  userStatisticsAccCodeV120 INTEGER

UserStatisticsAccCode2Entry  
SEQUENCE    
  userStatisticsAccCode2GrpNo INTEGER
  userStatisticsAccCode2Index INTEGER
  userStatisticsAccCode2Value OCTET STRING
  userStatisticsAccCode2ISDN INTEGER
  userStatisticsAccCode2MODEM INTEGER
  userStatisticsAccCode2Normal INTEGER
  userStatisticsAccCode2VPN INTEGER
  userStatisticsAccCode2MP INTEGER
  userStatisticsAccCode2RLogin INTEGER
  userStatisticsAccCode2Callback INTEGER
  userStatisticsAccCode2V110 INTEGER
  userStatisticsAccCode2V120 INTEGER

UserStatisticsAccDomainEntry  
SEQUENCE    
  userStatisticsAccDomainIndex OCTET STRING
  userStatisticsAccDomainISDN INTEGER
  userStatisticsAccDomainMODEM INTEGER
  userStatisticsAccDomainNormal INTEGER
  userStatisticsAccDomainVPN INTEGER
  userStatisticsAccDomainMP INTEGER
  userStatisticsAccDomainRLogin INTEGER
  userStatisticsAccDomainCallback INTEGER
  userStatisticsAccDomainV110 INTEGER
  userStatisticsAccDomainV120 INTEGER

UserStatisticsAccDomain2Entry  
SEQUENCE    
  userStatisticsAccDomain2GrpNo INTEGER
  userStatisticsAccDomain2Index INTEGER
  userStatisticsAccDomain2Value OCTET STRING
  userStatisticsAccDomain2ISDN INTEGER
  userStatisticsAccDomain2MODEM INTEGER
  userStatisticsAccDomain2Normal INTEGER
  userStatisticsAccDomain2VPN INTEGER
  userStatisticsAccDomain2MP INTEGER
  userStatisticsAccDomain2RLogin INTEGER
  userStatisticsAccDomain2Callback INTEGER
  userStatisticsAccDomain2V110 INTEGER
  userStatisticsAccDomain2V120 INTEGER

UserStatisticsOdnEntry  
SEQUENCE    
  userStatisticsOdnIndex INTEGER
  userStatisticsOdnISDN INTEGER
  userStatisticsOdnMODEM INTEGER
  userStatisticsOdnNormal INTEGER
  userStatisticsOdnVPN INTEGER
  userStatisticsOdnMP INTEGER
  userStatisticsOdnRLogin INTEGER
  userStatisticsOdnCallback INTEGER
  userStatisticsOdnV110 INTEGER
  userStatisticsOdnV120 INTEGER

SeekUserEntry  
SEQUENCE    
  seekUserType INTEGER
  seekUserIP IpAddress
  seekUserName DisplayString
  seekUserCallingNumber DisplayString
  seekUserRst INTEGER
  seekUserBoard INTEGER
  seekUserPort INTEGER
  seekUserGroupNo INTEGER
  seekUserServiceType INTEGER
  seekUserAccessType INTEGER
  seekUserSessionTime INTEGER
  seekUserRxRate INTEGER
  seekUserTxRate INTEGER
  seekUserCalledNumber DisplayString

KickUserEntry  
SEQUENCE    
  kickUserType INTEGER
  kickUserIP IpAddress
  kickUserName DisplayString
  kickUserCallingNumber DisplayString
  kickUserRst INTEGER
  kickUserBoard INTEGER
  kickUserPort INTEGER
  kickUserGroupNo INTEGER
  kickUserServiceType INTEGER
  kickUserAccessType INTEGER
  kickUserSessionTime INTEGER
  kickUserRxRate INTEGER
  kickUserTxRate INTEGER
  kickUserCalledNumber DisplayString

VspPortStatusEntry  
SEQUENCE    
  vspPortStatusSlotNo INTEGER
  vspPortStatusISDNPortStatus OCTET STRING
  vspPortStatusDSPPortStatus OCTET STRING

VspPortStatisticsEntry  
SEQUENCE    
  vspPortStatisticsSlotNo INTEGER
  vspPortStatisticsISDNTotalPorts INTEGER
  vspPortStatisticsISDNNoInstallPorts INTEGER
  vspPortStatisticsISDNIdelPorts INTEGER
  vspPortStatisticsISDNBusyPorts INTEGER
  vspPortStatisticsISDNFaultPorts INTEGER
  vspPortStatisticsISDNTestPorts INTEGER
  vspPortStatisticsISDNBlockPorts INTEGER
  vspPortStatisticsISDNOtherPorts INTEGER
  vspPortStatisticsDSPTotalPorts INTEGER
  vspPortStatisticsDSPNoInstallPorts INTEGER
  vspPortStatisticsDSPIdelPorts INTEGER
  vspPortStatisticsDSPBusyPorts INTEGER
  vspPortStatisticsDSPFaultPorts INTEGER
  vspPortStatisticsDSPTestPorts INTEGER
  vspPortStatisticsDSPBlockPorts INTEGER
  vspPortStatisticsDSPOtherPorts INTEGER

VspNASCallEntry  
SEQUENCE    
  vspNASCallSlotNo INTEGER
  vspNASCallPortNo INTEGER
  vspNASCallPortType INTEGER
  vspNASCallValidFlag INTEGER
  vspNASCallStartingTime DateAndTime
  vspNASCallCallingNumber DisplayString
  vspNASCallCalledNumber DisplayString
  vspNASCallDataRate INTEGER
  vspNASCallXmitRate INTEGER
  vspNASCallDirection INTEGER

VspNASSessionEntry  
SEQUENCE    
  vspNASSessionSlotNo INTEGER
  vspNASSessionPortNo INTEGER
  vspNASSessionValidFlag INTEGER
  vspNASSessionUserGroup INTEGER
  vspNASSessionUserName DisplayString
  vspNASSessionUserIPAddress IpAddress
  vspNASSessionUserSubNetMask IpAddress
  vspNASSessionServiceType INTEGER
  vspNASSessionUserCallingNumber DisplayString
  vspNASSessionUserOnlineTime INTEGER

VspNASCallStatisticsEntry  
SEQUENCE    
  vspNASCallStatisticsSlotNo INTEGER
  vspNASCallStatisticsCurrentAnalogIncoming INTEGER
  vspNASCallStatisticsCurrentAnalogOutgoing INTEGER
  vspNASCallStatisticsCurrentDigitalIncoming INTEGER
  vspNASCallStatisticsCurrentDigitalOutgoing INTEGER
  vspNASCallStatisticsCurrentV110Incoming INTEGER
  vspNASCallStatisticsCurrentV110Outgoing INTEGER
  vspNASCallStatisticsCurrentV120Incoming INTEGER
  vspNASCallStatisticsCurrentV120Outgoing INTEGER
  vspNASCallStatisticsCurrentAnalogLogonSuc INTEGER
  vspNASCallStatisticsCurrentDigitalLogonSuc INTEGER
  vspNASCallStatisticsCurrentV110LogonSuc INTEGER
  vspNASCallStatisticsCurrentV120LogonSuc INTEGER
  vspNASCallStatisticsTotalAnalogIncoming INTEGER
  vspNASCallStatisticsTotalAnalogOutgoing INTEGER
  vspNASCallStatisticsTotalDigitalIncoming INTEGER
  vspNASCallStatisticsTotalDigitalOutgoing INTEGER
  vspNASCallStatisticsTotalV110Incoming INTEGER
  vspNASCallStatisticsTotalV110Outgoing INTEGER
  vspNASCallStatisticsTotalV120Incoming INTEGER
  vspNASCallStatisticsTotalV120Outgoing INTEGER
  vspNASCallStatisticsTotalAnalogLogonSuc INTEGER
  vspNASCallStatisticsTotalDigitalLogonSuc INTEGER
  vspNASCallStatisticsTotalV110LogonSuc INTEGER
  vspNASCallStatisticsTotalV120LogonSuc INTEGER
  vspNASCallStatisticsTotalAnalogLogoutSuc INTEGER
  vspNASCallStatisticsTotalDigitalLogoutSuc INTEGER
  vspNASCallStatisticsTotalV110LogoutSuc INTEGER
  vspNASCallStatisticsTotalV120LogoutSuc INTEGER

Defined Values

huawei 1.3.6.1.4.1.2011
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.2011.2
OBJECT IDENTIFIER    

access-server 1.3.6.1.4.1.2011.2.3
OBJECT IDENTIFIER    

expert-v2 1.3.6.1.4.1.2011.2.3.4
OBJECT IDENTIFIER    

device 1.3.6.1.4.1.2011.2.3.4.1
OBJECT IDENTIFIER    

smb-board 1.3.6.1.4.1.2011.2.3.4.2
OBJECT IDENTIFIER    

vsp-board 1.3.6.1.4.1.2011.2.3.4.3
OBJECT IDENTIFIER    

hrb-board 1.3.6.1.4.1.2011.2.3.4.4
OBJECT IDENTIFIER    

mstu-board 1.3.6.1.4.1.2011.2.3.4.5
OBJECT IDENTIFIER    

devBaseInfoGroup 1.3.6.1.4.1.2011.2.3.4.1.1
OBJECT IDENTIFIER    

devMaintainGroup 1.3.6.1.4.1.2011.2.3.4.1.2
OBJECT IDENTIFIER    

devConfigGroup 1.3.6.1.4.1.2011.2.3.4.1.3
OBJECT IDENTIFIER    

devTrapGroup 1.3.6.1.4.1.2011.2.3.4.1.4
OBJECT IDENTIFIER    

devAlarmMibGroup 1.3.6.1.4.1.2011.2.3.4.1.4.1
OBJECT IDENTIFIER    

devMainTainTrapGroup 1.3.6.1.4.1.2011.2.3.4.1.4.2
OBJECT IDENTIFIER    

devAlarmTrapGroup 1.3.6.1.4.1.2011.2.3.4.1.4.3
OBJECT IDENTIFIER    

smbBaseInfoGroup 1.3.6.1.4.1.2011.2.3.4.2.1
OBJECT IDENTIFIER    

vspBaseInfoGroup 1.3.6.1.4.1.2011.2.3.4.3.1
OBJECT IDENTIFIER    

vspServiceInfoGroup 1.3.6.1.4.1.2011.2.3.4.3.2
OBJECT IDENTIFIER    

hrbBaseInfoGroup 1.3.6.1.4.1.2011.2.3.4.4.1
OBJECT IDENTIFIER    

mstuPerfomConfigGroup 1.3.6.1.4.1.2011.2.3.4.5.1
OBJECT IDENTIFIER    

mstuPerfomInfoGroup 1.3.6.1.4.1.2011.2.3.4.5.2
OBJECT IDENTIFIER    

mstuPerfomResetGroup 1.3.6.1.4.1.2011.2.3.4.5.3
OBJECT IDENTIFIER    

mstuPerfomSpendingGroup 1.3.6.1.4.1.2011.2.3.4.5.4
OBJECT IDENTIFIER    

mstuSDHLoopGroup 1.3.6.1.4.1.2011.2.3.4.5.5
OBJECT IDENTIFIER    

mstuTributaryNumGroup 1.3.6.1.4.1.2011.2.3.4.5.6
OBJECT IDENTIFIER    

deviceSystemInfomation 1.3.6.1.4.1.2011.2.3.4.1.1.1
OBJECT IDENTIFIER    

sysDateAndTime 1.3.6.1.4.1.2011.2.3.4.1.1.1.1
The date and time of this device can be set.DateAndTime is in octet mode which does not include time-zone information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DateAndTime  

sysIPAddr 1.3.6.1.4.1.2011.2.3.4.1.1.1.2
The device lacks of IP address
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

sysVersion 1.3.6.1.4.1.2011.2.3.4.1.1.1.3
Expert V2 device version
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER r001(1), r002(2), r003(3), r004(4), r005(5)  

slotBoardTable 1.3.6.1.4.1.2011.2.3.4.1.1.2
The board information table describes the information of the type, the status and the software version etc. of the boards in various slot of the EXPERT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBoardEntry

slotBoardEntry 1.3.6.1.4.1.2011.2.3.4.1.1.2.1
The object defined by this line describes the information of the board in the slot.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SlotBoardEntry  

slotBoardSlotNo 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.1
Slot number, it forms the index for this table. The EXPERT includes 16 slots. The value range of which is from 0 to 15.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

slotBoardType 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.2
The type of slot board, it describes the type of board to be inserted in the slot among which null (100) indicates null slot. When the variable value is null (100), the variable values of subsequent rows of this row has no meaning, all of which are 0 or null.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER smb(0), vsp-ipp(1), vsp-nas(2), hrb(3), hsp(4), mstu(5), frb(6), null(100)  

slotBoardNo 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.3
Board number, ranging from 0 to 11. When the slot is null, the returned value is 65535 indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slotBoardStatus 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.4
Board status not-install(0) Not-installed normal(1) Normal fault(2) Fault active-normal(3) The active one is normal active-error(4) The active one is faulty back-normal(5) The backup one is normal back-error(6) The backup one is faulty When the board type is null (100), the board status returns not-install (0) to indicate invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER not-install(0), normal(1), fault(2), active-normal(3), active-error(4), back-normal(5), back-error(6)  

slotBoardTime 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.5
system time
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

slotBoardPCBVersion 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.6
Description of Board PCB version. When the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slotBoardBIOSVersion 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.7
Description of Board BIOS version, when the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slotBoardSoftwareVersion 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.8
Board system version number. When the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

slotBoardLogicVersion 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.9
Description of Board logic version. When the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

slotBoardDSPVersion 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.10
Description of Board DSP version. When the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

slotBoardOtherVersion 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.11
Description of other versions. When the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..31)  

slotBoardCPURatio 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.12
Board CPU seizure ratio. When the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

slotBoardCPUStatus 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.13
Board CPU status normal(1) indicating CPU is normal overload1(2) indicating CPU is in the status of level 1 overload overload2(3) indicating CPU is in the status of level 2 overload overload3(4) indicating CPU is in the status of level 3 overload overload4(5) indicating CPU is in the status of level 4 overload When the board type is null (100), the returned value is no-meaning (0) indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no-meaning(0), normal(1), overload1(2), overload2(3), overload3(4), overload4(5)  

slotBoardMemorySize 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.14
Board memory size, including used part and unused part. When the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

slotBoardUsableMemory 1.3.6.1.4.1.2011.2.3.4.1.1.2.1.15
Board usable memory size. It means the unused memory of the board. When the board type is null (100), the returned value is indicating invalidation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

boardResetInfoTable 1.3.6.1.4.1.2011.2.3.4.1.1.3
Board reset information table. It describes the causes and time of the previous reset of the EXPERT board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BoardResetInfoEntry

boardResetInfoEntry 1.3.6.1.4.1.2011.2.3.4.1.1.3.1
The object defined by this line describes the causes and time of the previous reset of the board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BoardResetInfoEntry  

boardResetInfoSlotNo 1.3.6.1.4.1.2011.2.3.4.1.1.3.1.1
Slot number. This object forms the index for this table. EXPERT includes 16 slots with the value range from 0 to 15.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

boardResetInfoReason 1.3.6.1.4.1.2011.2.3.4.1.1.3.1.2
Board reset causes. The meaning of various enumeration values are as follows: slot-err(0), he input slot number is wrong. slot-nouse(1), The slot has not been configured with board. no-reset-record(2), This board has no reset record. lost-connect(3), The active SMB lost connection with this board. user-cmd(4), User delivers reset command. smb-snd-msg(5), SMD delivers reset message. abnormal(6), Reset is caused by abnormal error board-fault(7), It is unable to query due to board fault failed(8), Query failure /*SMB reset cause 20 ~ 49 */ swap-smb(20), Switching SMB board mt-reboot(21), User delivers the command of reset board all. /* VSP reset cause 50 ~ 79 */ /* HRB reset cause 80 ~ 109 */ /* MSTU reset cause 80 ~ 109 */ cfg-failed(110), Configuration failure failed-531(111), 531 failure failed-528(112), 528 failure failed-525(113) 525 failure
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER slot-err(0), slot-nouse(1), no0-reset-record(2), lost-connect(3), user-cmd(4), smb-snd-msg(5), abnormal(6), board-fault(7), failed(8), swap-smb(20), mt-reboot(21), cfg-failed(110), failed-531(111), failed-528(112), failed-525(113)  

boardResetInfoTime 1.3.6.1.4.1.2011.2.3.4.1.1.3.1.3
The time of previous board reset. If the board has not reset before, the returned date and time are not defined.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

e1InfoTable 1.3.6.1.4.1.2011.2.3.4.1.1.5
E1 information table. It describes the information of various E1 port on the VSP board and MSTU board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    E1InfoEntry

e1InfoEntry 1.3.6.1.4.1.2011.2.3.4.1.1.5.1
The object defined by this line describes the information of the E1 port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  E1InfoEntry  

e1InfoSlotNo 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.1
Slot number. This object and e1InfoE1NoInBoard form the index for this table which is used as the only one flag indicating a E1 in certain board. The value range of slot number is from 0 to 15.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

e1InfoE1NoInBoard 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.2
The E1 number inside the board. This object and e1InfoSlotNo form the index for this table with the value range from 0 to 62. Actually, the VSP board contains four E1 ports but additional space for 12 ports is reserved. Thus for the VSP board, the value range of this object is from 0 to 15. The MSTU board contains 63 E1 ports. Thus for the MSTU board, the value range of this object is from 0 to 62.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..62  

e1InfoE1No 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.3
The global E1 number in the EXPERT. When the device include 2 MSTU boards and 10 VSP boards, the number of E1s is the most which is up to 286; thus the value range of this object is from 0 to 285.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..165  

e1InfoE1Type 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.4
E1 type, the meaning of various enumeration valuesis as follows: no1(0) China No. 1 or R2 tup(1) SS7 TUP isup(2) SS7 ISUP pra(3) ISDN DSS1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no1(0), tup(1), isup(2), pra(3)  

e1InfoE1Status 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.5
The status of E1 port, the meaning of various enumeration values is as follows: uninstall(0) Not-installed fault(1) Fault normal(2) Normal alarm(3) Alarm
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER uninstall(0), fault(1), normal(2), alarm(3)  

e1InfoE1LoopBackStatus 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.6
The loop status of E1 port, the meaning of various enumeration valuesis as follows: remote-loop(2), in the status of remote loop local-loop(4), in the status of local loop rmt-lcl-loop(6), in remote and local loop status simultaneously payload-loop(8), in the status of payload loop rmt-payload-loop(10), in remote and payload loop status simultaneously lcl-payload-loop(12), in local and payload loop status simultaneously rmt-lcl-payload-loop(14), in local, remote and payload loop status simultaneously no-loop(16) not in loop status There are three types of loop: local loop, remote loop and payload loop which are not exclusive to one another, and can exist simultaneously.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER remote-loop(2), local-loop(4), rmt-lcl-loop(6), payload-loop(8), rmt-payload-loop(10), lcl-payload-loop(12), rmt-lcl-payload-loop(14), no-loop(16)  

e1InfoE1PCMPara 1.3.6.1.4.1.2011.2.3.4.1.1.5.1.7
PCM alarm parameter. This value is an 8-digit integer and each digit indicates one type of alarm as below: D7 D6 D5 D4 D3 D2 D1 D0 | | | | | | | |__ meaningless, fixed to 1 | | | | | | | | | | | | | |__Remote multiframe alarm, RMF | | | | | | | | | | | |__ TS16 all 1 | | | | | | | | | |__Slide code | | | | | | | |__Disconnection | | | | | |__Remote frame alarm, RFA | | | |___ Multiframe out-of-sync, MFA | |___Frame out-of-sync, FAS Note: Dx = 0 Alarm 1 = normal
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

mfcInfoTable 1.3.6.1.4.1.2011.2.3.4.1.1.6
MFC information table. It describes the status information of the MFC chip on the VSP boards.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MfcInfoEntry

mfcInfoEntry 1.3.6.1.4.1.2011.2.3.4.1.1.6.1
The object defined by this line describes the status information of the MFC chip.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MfcInfoEntry  

mfcInfoMfcNo 1.3.6.1.4.1.2011.2.3.4.1.1.6.1.1
Global MFC number. This variable value equals to the logic board number of the MFC-located VSP board with the range from 0 to 11.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..11  

mfcInfoMfcStatus 1.3.6.1.4.1.2011.2.3.4.1.1.6.1.2
The status of the MFC chip, the meaning of various enumeration values is as follows: normal(0), The MFC is in normal status. error(1), MFC fault num-err(2), The input MFC number is wrong. num-nouse(3) The MFC with this number is not configured.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER normal(0), error(1), num-err(2), num-nouse(3)  

userStatisticsGroup 1.3.6.1.4.1.2011.2.3.4.1.1.15
OBJECT IDENTIFIER    

userStatisticsDevTable 1.3.6.1.4.1.2011.2.3.4.1.1.15.1
The user statistics device table. It describes the number of various types of users within the device.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatisticsDevEntry

userStatisticsDevEntry 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1
This line contains the object describing the user statistics information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatisticsDevEntry  

userStatisticsDevIndex 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.1
Table index. It is meaningless and is fixed to 1. It is just for facilitating Agent to deliver multiple variable request.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER idx(1)  

userStatisticsDevISDN 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.2
The number of ISDN ports (without identifying 1B or 2B, due to repetition with MP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsDevMODEM 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.3
The number MODEM ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsDevNormal 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.4
The number of Normal users (General ppp users)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsDevVPN 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.5
The number of VPN users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsDevMP 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.6
The number of MP users (including Modem bundling, ISDN2B and ISDN+Modem)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsDevRLogin 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.7
The number of RLoging users (including Rlogin, TCP and TCP clear)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsDevCallback 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.8
The number of Callback users (not supported by R100)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsDevV110 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.9
The number of V.110 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsDevV120 1.3.6.1.4.1.2011.2.3.4.1.1.15.1.1.10
The number of V.120 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardTable 1.3.6.1.4.1.2011.2.3.4.1.1.15.2
Board user statistics table. It describes the statistics of various types of users through certain board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatisticsBoardEntry

userStatisticsBoardEntry 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1
This line contains the object describing the board user statistics information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatisticsBoardEntry  

userStatisticsBoardSlotNo 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.1
Slot number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

userStatisticsBoardISDN 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.2
The number of ISDN ports (without identifying 1B or 2B due to repetition with MP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardMODEM 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.3
The number of MODEM ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardNormal 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.4
The number of Normal users(general ppp users)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardVPN 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.5
The number of VPN users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardMP 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.6
The number of MP users (including Modem bundling, ISDN2B and ISDN+Modem)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardRLogin 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.7
The number of Rlogin users (including Rlogin, TCP and TCP clear)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardCallback 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.8
The number of Callback users (not supported by R100)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardV110 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.9
The number of V.110 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsBoardV120 1.3.6.1.4.1.2011.2.3.4.1.1.15.2.1.10
The number of V.120 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1Table 1.3.6.1.4.1.2011.2.3.4.1.1.15.3
E1-port user statistics table. It describes the statistics information of varied types of users through a certain E1 port.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatisticsE1Entry

userStatisticsE1Entry 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1
This line contains the object describing E1-port user statistics information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatisticsE1Entry  

userStatisticsE1SlotNo 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.1
Slot number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

userStatisticsE1PortNo 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.2
E1 port number in board
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..62  

userStatisticsE1ISDN 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.3
the number of ISDN ports(without identifying 1B or 2B due to repetition with MP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1MODEM 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.4
The number of MODEM ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1Normal 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.5
The number of Normal users(general ppp users)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1VPN 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.6
The number of VPN users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1MP 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.7
The number of MP users (including Modem bundling, ISDN2B and ISDN+Modem)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1RLogin 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.8
The number of Rlogin users (including Rlogin, TCP and TCP clear)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1Callback 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.9
The number of Callback users (not supported by R100)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1V110 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.10
The number of V.110 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsE1V120 1.3.6.1.4.1.2011.2.3.4.1.1.15.3.1.11
The number of V1.20 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeTable 1.3.6.1.4.1.2011.2.3.4.1.1.15.4
The table of user statistics according to access code. It describes the statistics of various types of users with the same access code.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatisticsAccCodeEntry

userStatisticsAccCodeEntry 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1
This line contains the object describing the user statistics according to access code.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatisticsAccCodeEntry  

userStatisticsAccCodeIndex 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.1
Access code
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

userStatisticsAccCodeISDN 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.2
The number of ISDN ports (without identifying 1B or 2B due to repetition with MP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeMODEM 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.3
The number of MODEM ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeNormal 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.4
The number of Normal users (general ppp users)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeVPN 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.5
The number of VPN users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeMP 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.6
The number of MP users (including Modem bundling, ISDN and ISDN+Modem)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeRLogin 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.7
The number of RLoging users (including Rlogin, TCP and TCP clear)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeCallback 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.8
The number of Callback users (not supported by R100)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeV110 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.9
The number of V.110 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCodeV120 1.3.6.1.4.1.2011.2.3.4.1.1.15.4.1.10
The number of V1.20 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2Table 1.3.6.1.4.1.2011.2.3.4.1.1.15.5
Both this and the previous tables of user statistics are according to access code and the only difference is that the index of this table is group number and intra-group ID in stead of access code. Thus, it is available to go through all configured access code and perform the statistics of port seizure and the statistics of variious types of users according to each access code.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatisticsAccCode2Entry

userStatisticsAccCode2Entry 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1
This line contains the object describing the user statistics according to access code.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatisticsAccCode2Entry  

userStatisticsAccCode2GrpNo 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.1
Group number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..300  

userStatisticsAccCode2Index 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.2
Intra-group ID
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2Value 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.3
Access code
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

userStatisticsAccCode2ISDN 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.4
The number of ISDN ports (without identifying 1B or 2B due to repetition with MP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2MODEM 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.5
The number of MODEM ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2Normal 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.6
The number of Normal users (general ppp users)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2VPN 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.7
The number of VPN users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2MP 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.8
The number of MP users (including Modem binding, ISDN2B and ISDN+Modem)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2RLogin 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.9
The number of RLoging users (including Rlogin, TCP and TCP clear)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2Callback 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.10
The number of Call back users ( not supported by R001)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2V110 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.11
The number of V.110 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccCode2V120 1.3.6.1.4.1.2011.2.3.4.1.1.15.5.1.12
The number of V1.20 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainTable 1.3.6.1.4.1.2011.2.3.4.1.1.15.6
The table of user statistics based on access field. It describes the statistics of various types of users with the same access domain.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatisticsAccDomainEntry

userStatisticsAccDomainEntry 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1
This line contains the object describing the user statistics accroding to access domain.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatisticsAccDomainEntry  

userStatisticsAccDomainIndex 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.1
Domain
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

userStatisticsAccDomainISDN 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.2
The number of ISDN ports (without identifying 1B or 2B due to repetition with MP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainMODEM 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.3
The number of MODEM ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainNormal 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.4
The number of Normal users (general ppp users)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainVPN 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.5
The number of VPN users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainMP 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.6
The number of MP users (including Modem binding, ISDN2B and ISDN+Modem)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainRLogin 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.7
The number of RLoging users (including Rlogin, TCP and TCP clear)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainCallback 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.8
The number of Call back users (not supported by R001)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainV110 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.9
The number of V.110 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomainV120 1.3.6.1.4.1.2011.2.3.4.1.1.15.6.1.10
The number of V1.20 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2Table 1.3.6.1.4.1.2011.2.3.4.1.1.15.7
The user statistics in both this and the previous tables are performed according to access domain. The only difference is that the index of this table is group number and intra-group ID in stead of access code. Thus, it is able to go through all configured access domain and perform the statistics of port seizure and the statistics of varied types of users according to each access domain.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatisticsAccDomain2Entry

userStatisticsAccDomain2Entry 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1
This line contains the object describing the user statistics according access domain.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatisticsAccDomain2Entry  

userStatisticsAccDomain2GrpNo 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.1
Group number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..300  

userStatisticsAccDomain2Index 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.2
Intra-group ID
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2Value 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.3
Domain
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

userStatisticsAccDomain2ISDN 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.4
The number of ISDN ports (without identifying 1B or 2B due to repetition with MP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2MODEM 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.5
The number of MODEM ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2Normal 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.6
The number of Normal users (general ppp users)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2VPN 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.7
The number of VPN users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2MP 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.8
The number of MP users (including Modem binding, ISDN2B and ISDN+Modem)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2RLogin 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.9
The number of RLoging users (including Rlogin, TCP and TCP clear)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2Callback 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.10
The number of Callback users (not supported by R001)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2V110 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.11
The number of V.110 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsAccDomain2V120 1.3.6.1.4.1.2011.2.3.4.1.1.15.7.1.12
The number of V1.20 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnTable 1.3.6.1.4.1.2011.2.3.4.1.1.15.8
The table of user statistics based on office direction. It describes the statistics of varied types of users with the same office direction.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserStatisticsOdnEntry

userStatisticsOdnEntry 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1
This line contains the object describing the user statistics according to office direction.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserStatisticsOdnEntry  

userStatisticsOdnIndex 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.1
Office direction number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..255  

userStatisticsOdnISDN 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.2
The number of ISDN ports (without identifying 1B or 2B due to repetition with MP)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnMODEM 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.3
The number of MODEM ports
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnNormal 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.4
The number of Normal users (general ppp users)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnVPN 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.5
The number of VPN users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnMP 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.6
The number of MP users (including Modem binding, ISDN2B and ISDN+Modem)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnRLogin 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.7
The number of RLoging users (including Rlogin, TCP and TCP clear)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnCallback 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.8
The number of Callback users (not supported by R001)
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnV110 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.9
The number of V.110 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

userStatisticsOdnV120 1.3.6.1.4.1.2011.2.3.4.1.1.15.8.1.10
The number of V1.20 users
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

seekUserTable 1.3.6.1.4.1.2011.2.3.4.1.2.27
nas board user query table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SeekUserEntry

seekUserEntry 1.3.6.1.4.1.2011.2.3.4.1.2.27.1
This table contains operation objects for nas board user query.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SeekUserEntry  

seekUserType 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.1
User query operation types: ByIP(0): Query on the basis of IP addresses. ByUserName(1): Query on the basis of user names. ByCallingNumber(2): Query on the basis of calling numbers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER byip(0), byusername(1), bycallingnumber(2)  

seekUserIP 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.2
User IP address (network byte sequence)
Status: mandatory Access: write-only
OBJECT-TYPE    
  IpAddress  

seekUserName 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.3
User name
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

seekUserCallingNumber 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.4
Calling number
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString Size(1..24)  

seekUserRst 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.5
Query results: success(0):The query succeeds. fail(1): The query fails. end(2): The query ends.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER success(0), fail(1), end(2)  

seekUserBoard 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.6
VSP board number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..11  

seekUserPort 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.7
User port number 0-119 (MODEM), 0-123(ISDN)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..123  

seekUserGroupNo 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.8
Group number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..300  

seekUserServiceType 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.9
Primitive port type
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER none(1), other(2), ppp(3), slip(4), mpp(5), x25(6), combinet(7), frameRelay(8), euraw(9), euui(10), txt-telnet(11), bin-telnet(12), rawtcp-suffix(13), terminalserver(14), mp(15), vpn-suffix(16), callback(17), rlogin-suffix(18), tcpclear(19)  

seekUserAccessType 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.10
User access type
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER modem-asyn(0), modem-syn(1), hdlc-syn(2), hdlc-asyn-v120(3), hdlc-asyn-v110(4)  

seekUserSessionTime 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.11
Session duration (second)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

seekUserRxRate 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.12
Receiving speed rate
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

seekUserTxRate 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.13
Sending speed rate
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

seekUserCalledNumber 1.3.6.1.4.1.2011.2.3.4.1.2.27.1.14
Called number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..24)  

kickUserTable 1.3.6.1.4.1.2011.2.3.4.1.2.28
nas-board forced user disconnection table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KickUserEntry

kickUserEntry 1.3.6.1.4.1.2011.2.3.4.1.2.28.1
This table contains operation objects for nas-board forced user disconnection.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  KickUserEntry  

kickUserType 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.1
User disconnection operation types: byip(0): Disconnection users are determined on the basis of IP addresses. byusername(1): Disconnection users are determined on the basis of user names. bycallingnumber(2): Disconnection users are determined on the basis of calling numbers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER byip(0), byusername(1), bycallingnumber(2)  

kickUserIP 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.2
User IP address (network byte sequence)
Status: mandatory Access: write-only
OBJECT-TYPE    
  IpAddress  

kickUserName 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.3
User name
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString Size(1..64)  

kickUserCallingNumber 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.4
Calling number
Status: mandatory Access: write-only
OBJECT-TYPE    
  DisplayString Size(1..24)  

kickUserRst 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.5
Operation results: success(0): The query succeeds. fail(1): The query fails. end(2): The query ends.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER success(0), fail(1), end(2)  

kickUserBoard 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.6
VSP board number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..11  

kickUserPort 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.7
User port number 0-119(MODEM), 0-123(ISDN)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..123  

kickUserGroupNo 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.8
Group number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..300  

kickUserServiceType 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.9
Primitive port type
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER none(1), other(2), ppp(3), slip(4), mpp(5), x25(6), combinet(7), frameRelay(8), euraw(9), euui(10), txt-telnet(11), bin-telnet(12), rawtcp-suffix(13), terminalserver(14), mp(15), vpn-suffix(16), callback(17), rlogin-suffix(18), tcpclear(19)  

kickUserAccessType 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.10
User access type
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER modem-asyn(0), modem-syn(1), hdlc-syn(2), hdlc-asyn-v120(3), hdlc-asyn-v110(4)  

kickUserSessionTime 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.11
Session duration (second)
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kickUserRxRate 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.12
Receiving rate
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kickUserTxRate 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.13
Sending speed rate
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER  

kickUserCalledNumber 1.3.6.1.4.1.2011.2.3.4.1.2.28.1.14
Called number
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..24)  

vspPortStatusTable 1.3.6.1.4.1.2011.2.3.4.3.1.1
Port status table of VSP board and HSP board. It indicates the statuses of DSP ports and ISDN ports of VSP board or HSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VspPortStatusEntry

vspPortStatusEntry 1.3.6.1.4.1.2011.2.3.4.3.1.1.1
It contains objects describing statuses of DSP ports and ISDN ports of VSP board or HSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VspPortStatusEntry  

vspPortStatusSlotNo 1.3.6.1.4.1.2011.2.3.4.3.1.1.1.1
Slot number of VSP board or HSP board, forming the index of this table. The value range is 0-15.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

vspPortStatusISDNPortStatus 1.3.6.1.4.1.2011.2.3.4.3.1.1.1.2
ISDN port statuses. There are 62 bytes totally. Every byte indicates the statuses of two ports. That is, every 4 bits indicate status of one port. This object can totally indicate statuses of 124 ISDN ports. The following is the corresponding relations between port statuses and 4-bit values indicating corresponding port status. 0 NOINSTALL Uninstalled 1 IDLE Idle 2 BUSY Busy 3 FAULT Fault 4 TESTING Test 5 BLOCK Blocked 6 OTHER Other 15 NO-MEANING No meaning If VSP contains less than 124 ports, those exceeding the number of ISDN ports of this board are indicated with 15 NO-MEANING. For HSP board, this object has its meaning. For VSP board, only DSP ports are provided and NOINSTALL is used for all ports of this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(62)  

vspPortStatusDSPPortStatus 1.3.6.1.4.1.2011.2.3.4.3.1.1.1.3
DSP port statuses. There are 60 bytes totally. Every byte indicates statuses of two ports. That is, every 4 bits indicate status of one port. This object can totally indicate statuses of 120 DSP ports. The following is the corresponding relations between port statuses and 4-bit values indicating corresponding port status. 0 NOINSTALL Uninstalled 1 IDLE Idle 2 BUSY Busy 3 FAULT Fault 4 TESTING Test 5 BLOCK Blocked 6 OTHER Other 15 NO-MEANING No meaning If VSP contains less than 120 ports, those exceeding the number of DSP ports of this board are indicated with 15 NO-MEANING. For VSP board, this object has its meaning. For HSP board, only ISDN ports are provided and NOINSTALL is used for all ports of this object.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(60)  

vspPortStatisticsTable 1.3.6.1.4.1.2011.2.3.4.3.1.3
Port statistics table of VSP board and HSP board. It contains the numbers of DSP ports and IDSN ports in various statuses of VSP board or HSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VspPortStatisticsEntry

vspPortStatisticsEntry 1.3.6.1.4.1.2011.2.3.4.3.1.3.1
It contains objects describing numbers of DSP ports and IDSN ports in various statuses of VSP board or HSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VspPortStatisticsEntry  

vspPortStatisticsSlotNo 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.1
Slot number of VSP board or HSP board. It forms the index of this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

vspPortStatisticsISDNTotalPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.2
Number of total ISDN ports of this HSP board. For VSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..124  

vspPortStatisticsISDNNoInstallPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.3
Number of uninstalled ISDN ports of this HSP board. For VSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..124  

vspPortStatisticsISDNIdelPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.4
Number of idle ISDN ports of this HSP board. For VSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..124  

vspPortStatisticsISDNBusyPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.5
Number of busy ISDN ports of this HSP board. For VSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..124  

vspPortStatisticsISDNFaultPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.6
Number of fault ISDN ports of this HSP board. For VSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..124  

vspPortStatisticsISDNTestPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.7
Number of test ISDN ports of this HSP board. For VSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..124  

vspPortStatisticsISDNBlockPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.8
Number of blocked ISDN ports of this HSP board. For VSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..124  

vspPortStatisticsISDNOtherPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.9
Number of ISDN ports in other statuses of this HSP board. For VSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..124  

vspPortStatisticsDSPTotalPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.10
Number of total DSP ports of this VSP board. For HSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

vspPortStatisticsDSPNoInstallPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.11
Number of uninstalled DSP ports of this VSP board. For HSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

vspPortStatisticsDSPIdelPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.12
Number of idle DSP ports of this VSP board. For HSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

vspPortStatisticsDSPBusyPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.13
Number of busy DSP ports of this VSP board. For HSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

vspPortStatisticsDSPFaultPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.14
Number of fault DSP ports of this VSP board. For HSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

vspPortStatisticsDSPTestPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.15
Number of test DSP ports of this VSP board. For HSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

vspPortStatisticsDSPBlockPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.16
Number of blocked DSP ports of this VSP board. For HSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

vspPortStatisticsDSPOtherPorts 1.3.6.1.4.1.2011.2.3.4.3.1.3.1.17
Number of DSP ports in other statuses of this VSP board. For HSP board, this object is 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..120  

vspNASCallTable 1.3.6.1.4.1.2011.2.3.4.3.2.1
Access service call status table of VSP board and HSP board. It describes the information of various statuses of calls through ports of VSP board and HSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VspNASCallEntry

vspNASCallEntry 1.3.6.1.4.1.2011.2.3.4.3.2.1.1
It contains objects describing call status information of VSP board and HSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VspNASCallEntry  

vspNASCallSlotNo 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.1
Slot number of VSP board or HSP board. It forms the index of this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

vspNASCallPortNo 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.2
Port number of VSP board or HSP board. For VSP board, it is DSP port number and the range is 0-199. For HSP board, it is ISDN port and the range is 0-123.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..123  

vspNASCallPortType 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.3
Port type. It indicates the port is an MODEM port or an ISDN port. MODEM port is DSP port that we usually say.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER modem(1), isdn(2)  

vspNASCallValidFlag 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.4
Call validity flag. It indicates whether there is any call through this port currently. invalid(1) indicates that there is no call through the port currently and the data has no meaning. valid(2) indicates that there is a call through this port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

vspNASCallStartingTime 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.5
Start time of this call. If vspNASCallValidFlag is invalid, this object returns 0000 year 0 moth 0 date 0 hour 0 minute 0 second.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DateAndTime  

vspNASCallCallingNumber 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.6
Calling number of this call. If vspNASCallValidFlag is invalid, this object will return NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

vspNASCallCalledNumber 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.7
Called number of this call. If vspNASCallValidFlag is invalid, this object will return NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..24)  

vspNASCallDataRate 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.8
Receiving speed rate. The receive rate for ISDN calls or the baud rate for modem calls. A value of 0 is returned if entry is invalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallXmitRate 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.9
Sending speed rate. The transmit rate for ISDN calls or the baud rate for modem calls. A value of 0 is returned if entry is invalid.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallDirection 1.3.6.1.4.1.2011.2.3.4.3.2.1.1.10
Call direction. A value of no-meaning(3) is returned if entry is invalid
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER callOutgoing(1), callIncoming(2), no-meaning(3)  

vspNASSessionTable 1.3.6.1.4.1.2011.2.3.4.3.2.2
Access service session information table of VSP board and HSP board. It describes the information of various statuses of connection users through ports of VSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VspNASSessionEntry

vspNASSessionEntry 1.3.6.1.4.1.2011.2.3.4.3.2.2.1
It contains objects describing connection user information of VSP board and HSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VspNASSessionEntry  

vspNASSessionSlotNo 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.1
Slot number of VSP board or HSP board. It forms the index of this table
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

vspNASSessionPortNo 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.2
Port number of VSP board or HSP board. For VSP board, it is a DSP port and the range is 0-119. For HSP board, it is an ISDN port and the range is 0-123.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..123  

vspNASSessionValidFlag 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.3
Session validity flag. invalid(1) indicates that there is no user connected through this port currently and the data has no meaning. valid(2) indicates that there is an user connected through this port currently. If this object is valid(2), setting this object to be invalid(1) via NM station will break user connection through this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER invalid(1), valid(2)  

vspNASSessionUserGroup 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.4
User group. This device supports virtual ISP and there is user group concept. The user group range is 1-300. If the validity flag is invalid(1), this object returns 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..300  

vspNASSessionUserName 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.5
User name. If the validity flag is invalid(1), this object will return NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

vspNASSessionUserIPAddress 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.6
User IP address. If the validity flag is invalid(1), this object will return 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vspNASSessionUserSubNetMask 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.7
User IP address subnet mask. If the validity flag is invalid(1), this object will return 0.0.0.0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

vspNASSessionServiceType 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.8
User service type. If the validity flag is invalid(1), this object will return none(1).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), other(2), ppp(3), slip(4), mpp(5), x25(6), combinet(7), frameRelay(8), euraw(9), euui(10), txt-telnet(11), bin-telnet(12), rawtcp-suffix(13), terminalserver(14), mp(15), vpn-suffix(16), callback(17), rlogin-suffix(18), tcpclear(19)  

vspNASSessionUserCallingNumber 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.9
Calling number. If the validity flag is invalid(1), this object will return NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..25)  

vspNASSessionUserOnlineTime 1.3.6.1.4.1.2011.2.3.4.3.2.2.1.10
Connection duration. The unit is second. If the validity flag is invalid(1), this object will return NULL.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTable 1.3.6.1.4.1.2011.2.3.4.3.2.5
Access service call statistics table of VSP board and HSP board. It contains the connection information statistics of various calls since board reset.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VspNASCallStatisticsEntry

vspNASCallStatisticsEntry 1.3.6.1.4.1.2011.2.3.4.3.2.5.1
It contains objects describing call connection statistics information of VSP board and HSP board.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  VspNASCallStatisticsEntry  

vspNASCallStatisticsSlotNo 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.1
Slot number of VSP board or HSP board. It forms the index of this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..15  

vspNASCallStatisticsCurrentAnalogIncoming 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.2
Number of current analog incoming calls. The number of current analog incoming calls on this VSP board is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentAnalogOutgoing 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.3
Number of current analog outgoing calls. The number of current analog outgoing calls on this board is returned
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentDigitalIncoming 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.4
Number of current digital incoming calls. The number of current analog incoming calls on this VSP board is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentDigitalOutgoing 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.5
Number of current digital outgoing calls. The number of current digital outgoing calls on this board is returned
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentV110Incoming 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.6
Number of current V110 incoming calls. The current number of V.110 incoming calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentV110Outgoing 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.7
Number of current V110 outgoing calls. The current number of V.110 outgoing calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentV120Incoming 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.8
Number of current V120 incoming calls. The current number of V.120 incoming calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentV120Outgoing 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.9
Number of current V120 outgoing calls. The current number of V.120 outgoing calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentAnalogLogonSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.10
Number of current analog connection successes. Connection success means that an user gets online normally.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentDigitalLogonSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.11
Number of current digital connection successes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentV110LogonSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.12
Number of current V110 connection successes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsCurrentV120LogonSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.13
Number of current V120 connection successes
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalAnalogIncoming 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.14
Number of total analog incoming calls since the last board restart or the last variable clear. The total number of analog incoming calls since system bootup or last clear of the variable is returned. s
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalAnalogOutgoing 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.15
Number of total analog outgoing calls since the last board restart or the last variable clear. The total number of analog outgoing calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalDigitalIncoming 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.16
Number of total digital incoming calls since the last board restart or the last variable clear. The total number of digital incoming calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalDigitalOutgoing 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.17
Number of total digital outgoing calls since the last board restart or the last variable clear. The total number of digital outgoing calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalV110Incoming 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.18
Number of total V110 incoming calls since the last board restart or the last variable clear. The total number of V.110 incoming calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalV110Outgoing 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.19
Number of total V110 outgoing calls since the last board restart or the last variable clear. The total number of V.110 outgoing calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalV120Incoming 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.20
Number of total V120 incoming calls since the last board restart or the last variable clear. The total number of V.120 incoming calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalV120Outgoing 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.21
Number of total V120 outgoing calls since the last board restart or the last variable clear. The total number of V.120 outgoing calls since system bootup or last clear of the variable is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalAnalogLogonSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.22
Number of total analog connection successes since the last board restart or the last variable clear.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalDigitalLogonSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.23
Number of total digital connection successes since the last board restart or the last variable clear.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalV110LogonSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.24
Number of total V110 connection successes since the last board restart or the last variable clear.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalV120LogonSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.25
Number of total V120 connection successes since the last board restart or the last variable clear.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalAnalogLogoutSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.26
Number of total normal analog disconnections since the last board restart or the last variable clear. Normal disconnection means that an user, after he succeeds in connection, makes an active hangup and then is disconnected instead of being disconnected due to other abnormal causes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalDigitalLogoutSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.27
Number of total normal digital disconnections since the last board restart or the last variable clear.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalV110LogoutSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.28
Number of total normal V110 disconnections since the last board restart or the last variable clear.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

vspNASCallStatisticsTotalV120LogoutSuc 1.3.6.1.4.1.2011.2.3.4.3.2.5.1.29
Number of total normal V120 disconnections since the last board restart or the last variable clear.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

seekUserTrap 27
The result of querying user of NAS board
TRAP-TYPE    

kickUserTrap 28
The result of NAS board kicking user offline
TRAP-TYPE    

alarmLevel 1.3.6.1.4.1.2011.2.3.4.1.4.1.1
Alarm level: emergencyAlarm(1): emergency Alarm importantAlarm(2): important Alarm generalAlarm(3): eneral Alarm promptAlarm(4): prompt Alarm Please refer Regulations of C&C08 Switch Network Management Alarm Report for the specific definitions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER emergencyAlarm(1), importantAlarm(2), generalAlarm(3), promptAlarm(4)  

alarmNMCategory 1.3.6.1.4.1.2011.2.3.4.1.4.1.2
Classification of network management alarm: powerSupply: Power Supply Alarm environment: Environment Alarm signaling: Signaling Alarm trunk: Trunk Alarm hardware: Hardware Alarm software: Software Alarm operation: Operation Alarm communicationFault: Communication Fault Alarm serviceQuality: Service Quality Alarm handlingError: HandlingError Alarm Please refer to Regulations of C&C08 Switch Network Management Alarm Report for the specific definitions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER powerSupply(1), environment(2), signaling(3), trunk(4), hardware(5), software(6), operation(7), communicationFault(8), serviceQuality(9), handlingError(10)  

alarmContents 1.3.6.1.4.1.2011.2.3.4.1.4.1.3
The content of MML alarm is a string of a certain format. Please refer to Regulations of C&C08 Switch Network Management Alarm Report for the specific formats.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString  

alarmMML 1
The MMl alarm is transmitted in Trap mode. Alarm level indicates the alarm level and Alarm NM Category indicates the alarm category. Alarm contents indicate the string contents of MML alarm and the string is accordant with the Regulations of cc08 Network Management Alarm Report.
TRAP-TYPE    

alarmSlotBoardChange 2
Board position changes TRAP. When the status of an equipment board or board type changes, it will be sent out by the equipment.
TRAP-TYPE    

alarmBoardLed 10001
Board alarm indicator changes TRAP. When the status of an equipment board alarm indicator changes, it will be sent out by the equipment.
TRAP-TYPE